Technical Electives (2024 and before)
PLEASE NOTE: this applies to students who entered the School of Mechanical Engineering BEFORE Fall 2025. If you entered FALL 2025 OR AFTER, please see this simplified guide on choosing Electives.
Technical Elective Topics | Comprehensive List of Technical Electives | ME Electives
Students are required to take nine credit hours of Technical Electives. Generally, students may select courses from the broad classifications listed below.
- Physics courses of level higher than PHYS 241.
- Chemistry courses requiring CHM 116 or 124 as prerequisites.
- Advanced biology courses and veterinary science courses.
- Mathematics courses more advanced than MA 303.
- Technical Writing, ENGL 421 (may not be used for general education elective credit – ENGL 420 and ENGL 421 cannot both be used to satisfy degree requirements).
- 300, 400, or 500 level courses in any engineering school other than Mechanical Engineering that are not duplicates of other courses taken.
- ME elective classes that are not part of the ME core curriculum.
Please note that NUCL 320/325 may not be used as a Tech Elective.
However, not all courses within these classifications are acceptable for technical elective credit. Before registering for a course, be sure it appears in the list of pre-approved technical electives provided below. If a course does not appear on the pre-approved list, a written request (or email) may be submitted to the Undergraduate Office to have a course considered for technical elective credit.
Technical Elective Topics
To assist students in their selection of technical electives, the list of pre-approved courses is divided into 47 topic areas. Neither the list of topic areas, nor the list of pre-approved courses within each area, is intended to be all-inclusive. Students should refer to the appropriate undergraduate catalog for course description and prerequisite information or click on any of the course links below for online course information.
Students are encouraged to discuss their career plans and technical elective program with faculty members whose expertise are in their area of special interest. Students may wish to consider 3-6 credits of ME 498/499 projects to study contemporary areas of research not covered by the standard curriculum. Undergraduate research is an excellent option for students considering graduate study in engineering.
- ME 413 Noise Control
- ME 513 Engineering Acoustics
- ME 563 Mechanical Vibrations
- ME 579 Digital Signal Processing
- AAE 334 Aerodynamics
- AAE 340 Dynamics and Vibrations
- AAE 372 Jet Propulsion Power Plants
- AAE 416 Viscous Flows
- AAE 512 Computational Aerodynamics
- AAE 514 Intermediate Aerodynamics
- AAE 514 Unsteady Aerodynamics
- AAE 532 Orbit Mechanics
- AAE 550 Multidisciplinary Design Optimizations
- ABE 450 Finite Element Method in Design and Optimization
- MA 301 Introduction to Proof Through Real Analysis
- MA 341 Foundations Through Analysis
- MA 375 Introduction to Discrete Mathematics
- MA 425 Elements of Complex Analysis
- MA 510 Vector Calculus
- MA 511 Linear Algebra
- MA 527 Advanced Mathematics for Engineers and Physicists I
- ME 434 Gas Turbines for Power and Propulsion
- ME 440 Automotive Prime Movers: Green Engines and Clean Fuel
- ME 460 Power Engineering
- ME 518 Analysis of Thermal Systems
- ME 522 Indoor Environmental Analysis and Design
- CE 311 Architectural Engineering
- CE470 Structural Steele Design
- CE 473 Reinforced Concrete Design
- CE 479 Design of Building Components and Systems
- CE 513 Lighting of Buildings
- CE 51401 Building Controls
- CE 51501 Building Energy Audits
- CE 560 Public Mass Transportation
- CE 563 Airport Design
- ME 440 Automotive Prime Movers: Green Engines and Clean Fuel
- ME 455 Vehicle Design and Fabrication
- ME 565 Vehicle Dynamics
- ABE 435 Hydraulics Control Systems for Mobile Equipment
- ABE 545 Design of Off-Highway Vehicles
- ASM 345 Power Units and Power Trains
- CE 463 Highway Transportation Characteristics
- CE 557 Air Quality Management
- ME 508 Heat Transfer in Biomedical Systems
- ME 577 Human Motion Kinetics
- BIOL 110 Fundamentals of Biology I
- BIOL 111 Fundamentals of Biology II
- BIOL 131 Biology II: Development, Structure, and Function of Organisims
- BIOL 230 The Biology of the Living Cel
- BIOL 241-242 Biology IV: Genetics and Molecular Biology
- BME 204 Biomechanics of Hard and Soft Tissues
- BME 540 Biomechanics
- BME 551 Tissue Engineering
- BME 562 Regulatory Issues Surrounding Approval Of Biomedical Devices
- CHE 461 Biomedical Engineering
- CHM 255 Organic Chemistry
- CHM 25501 Organic Chemistry Lab
- CHM 256 Organic Chemistry
- CHM 25601 Organic Chemistry Lab
- HSCI 312 Radiation Science Fundamentals
- ME 430 Power Engineering
- ME 501 Statistical Thermodynamics
- ME 525 Combustion
- ME 540 Internal Combustion Engines
- ME 444 Computer Aided Design and Prototyping
- ME 576 Computer Control of Manufacturing Processes
- ME 586 Microprocessors in Electromechanical Systems
- CNIT 280 Systems Analysis and Design Methods
- CNIT 315 Systems Programming
- CNIT 320 Policy, Regulation and Globalization in Information Technology
- CNIT 325 Object-Oriented Application Development
- CNIT 372 Database Programming
- CNIT 392 Enterprise Data Management
- CNIT 480 Managing Information Technology Projects
- CS 240 Programming in C
- CS 250 Computer Architecture
- CS 251 Data Structures and Algorithms
- CS 252 Systems Programming
- CS 307 Software Engineering I
- CS 314 Numerical Methods
- CS 334 Fundamentals of Computer Graphics
- CS 348 Information Systems
- CS 352 Compilers: Principles and Practice
- CS 354 Operating Systems
- CS 381 Introduction to the Analysis of Algorithms
- CS 471 Introduction to Artificial Intelligence
- CS 565 Programming Languages
- ECE 20875 Python for Data Science
- CE 222 Lifecycle Engineering and Management of Constructed Facilities
- CE 32201 Project Control and Life Cycle Execution of Constructed Facilities
- CE 355 Engineering Environmental Sustainability
- CE 361 Transportation Engineering
- ME 575 Theory and Design of Control Systems
- ME 576 Computer Control of Manufacturing Processes
- ME 578 Digital Control
- ME 579 Digital Signal Processing
- ME 586 Microprocessors in Electromechanical Systems
- AAE 301 Signal Analysis for Aerospace Engineering
- AAE 364 Control System Analysis
- AAE 421 Flight Dynamics and Controls
- AAE 564 Systems Analysis and Synthesis
- ABE 435 Hydraulic Control Systems for Mobile Equipment
- ABE 460 Sensors and Process Control
- ECE 301 Signals and Systems
- ECE 321 Electromechanical Motion Devices
- MET 284 Introduction to Industrial Controls
- ME 489 Finite Element Analysis
- ME 553 Product and Process Design
- ME 554 Intellectual Property (1 credit)
- ME 556 Lubrication, Friction, and War
- ME 557 Design for Manufacturability
- ME 565 Vehicle Dynamics
- ME 570 Machine Design
- ME 572 Analysis and Design of Robotic Manipulators
- AAE 251 Introduction to Aerospace Design
- AAE 35103 Aerospace Systems Design
- ABE 330 Design of Machine Components
- ABE 336 All-Terrain Vehicle Design
- ABE 501 Welding Engineering
- CE 414 Building Mechanical and Electrical System Design
- ENTR 310 Marketing and Management for New Ventures
- EPCS 301 Jr. Participation in Engineering Projects in Community Service (EPICS) - 1 Credit
- EPCS 302 Jr. Participation in Engineering Projects in Community Service (EPICS) - 2 Credits
- EPCS 401 Sr. Participation in Engineering Projects in Community Service (EPICS) - 1 Credit
- EPCS 402 Sr. Participation in Engineering Projects in Community Service (EPICS) - 2 Credits
- ME 562 Advanced Dynamics
- ME 565 Vehicle Dynamics
- ME 580 Nonlinear Engineering Systems
- AAE 340 Dynamics and Vibrations
Earth and Atmospheric Sciences
- ASTR 363 The Solar System
- ASTR 364 Stars and Galaxies
- ASTR 370 Cosmology
- EAPS 225 Physics of Climate
- EAPS 421 Atmospheric Thermodynamics I
- EAPS 422 Atmospheric Dynamics I
- EAPS 423 Atmospheric Dynamics II
- ME 588 Mechatronics
- ECE 20002 Linear Circuit Analysis II
- ECE 255 Introduction to Electronics Analysis and Design
- ECE 264 Advanced C Programming
- ECE 270 Introduction to Digital System Design
- ECE 30010 Introduction to Machine Learning and Pattern Recognition
- ECE 301 Signals and Systems
- ECE 302 Probabilistic Methods in Electrical Engineering
- ECE 311 Electric and Magnetic Fields
- ECE 362 Microprocessors
- ECE 365 Introduction to Design of Digital Computers
- ECE 368 Data Structures
- ECE 423 Electromechanical Motion Control
- ECE 433 Power Electronics
- ECE 51018 Hybrid Electric Vehicles
- ECE 50631 Fundamentals of Current Flow
- PHYS 330 Intermediate Electricity and Magnetism
- ME 415 Energy Systems Engineering
- ME 430 Power Engineering
- ME 440 Automotive Prime Movers: Green Engines and Clean Fuel
- ME 518 Analysis of Thermal Systems
- NUCL 402 Engineering of Nuclear Power Plants
- ME 492 Technology and Values
- CE 524 Legal Aspects in Engineering Practice
- EEE 530 LCA: Principles and Applications
- ENGL 421 Technical Writing (may not be used for general education elective credit – ENGL 420 and ENGL 421 cannot both be used to satisfy degree requirements)
- IE 577 Human Factors in Engineering
- OBHR 330 Introduction to Organizational Behavior
- ME 413 Noise Control
- BIOL 121 Biology I: Diversity, Ecology, and Behavior
- CE/EEE 350 Introduction to Environmental and Ecological Engineering
- CE/EEE 456 Water and Wastewater Treatment
- CE 457 Air Pollution Control and Design
- CE 557 Air Quality Management
- EAPS 225 Physics of Climate
- EEE 230 Engineering Economics And Environment
- EEE 430 Industrial Ecology and Life Cycle Analysis
- EEE 530 LCA: Principles and Applications
- FNR 586 Urban Ecology
- ME 430 Power Engineering
- ME 444 Computer Aided Design and Prototyping
- ME 505 Intermediate Heath Transfer
- ME 509 Intermediate Fluid Mechanics
- ME 525 Combustion
- ME 581 Numerical Methods in Mechanical Engineering
- CE 355 Engineering Environmental Sustainability
- CE 524 Legal Aspects in Engineering Practice
- NUCL 200 Introduction to Nuclear Engineering
- ME 506 Two-Phase Flow and Heat Transfer
- ME 509 Intermediate Fluid Mechanics
- ME 510 Gas Dynamics
- ME 514 Fundamental of Wind Energy
- ME 517 Micro/Nano Scale Physical Processes
- ME 526 Spray Applications and Theory
- AAE 412 Introduction to Computational Fluid Dynamics
- ASM 345 Power Units and Power Trains
- ME 503 Micro/Nano Scale Physical Processes
- ME 505 Intermediate Heath Transfer
- ME 506 Intermediate Heat Transfer
- ME 507 Laser Processing
- ME 511 Heat Transfer in Electronic Systems
- ME 518 Analysis of Thermal Systems
- CE 440 Urban Hydraulics
- CE 540 Open Channel Hydraulics
- CE 542 Hydrology
- MGMT 201 Management Accounting I (pre-req MGMT 200)
- MGMT 254 Legal Foundations of Business I
- MGMT 304 Introduction to Financial Management
- MGMT 310 Financial Management
- MGMT 323 Introduction to Market Analysis
- MGMT 324 Marketing Management (Pre-req ECON 252 and MGMT 201)
- MGMT 350 Intermediate Accounting I (Pre-req MGMT 201)
- MGMT 351 Intermediate Accounting 11 (Pre-req MGMT 350)
- MGMT 352 Strategic Management
- MGMT 354 Legal Foundations of Business I
- MGMT 391 Strategic Thinking And Decision-Making
- MGMT 44301 Management of Human Resources
- MGMT 44810 Technology Strategy
- MGMT 455 Legal Background of Business I
- MGMT 488 Data Driven Decisions in Digital Markets
- OBHR 330 Introduction to Organizational Behavior
- ME 363 Principles and Practices of Manufacturing Processes (IE 370 and ME 363 cannot both be taken for Technical Elective credit)
- ME 557 Design for Manufacturability
- ME 576 Computer Control of Manufacturing Processes
- ABE 501 Welding Engineering
- IE 343 Engineering Economics
- IE 370 Manufacturing Processes I (IE 370 and ME 363 cannot both be taken for Technical Elective Credit)
- IE 470 Manufacturing Processes II
- IE 530 Quality Control
- IE 570 Manufacturing Process Engineering
- MET 349 Stringed Instrument Design and Manufacture
- MET 451 Manufacturing Quality Control
- MFET 344 Automated Manufacturing Processes
- MFET 348 Advanced Industrial Robotics
- STAT 511 Statistical Methods
- ME 559 Micromechanics of Materials
- AAE 555 Mechanics of Composite Materials
- MSE 260 Thermodynamics of Materials
- MSE 270 Atomistic Materials Science
- MSE 330 Processing and Properties of Materials
- MSE 382 Mechanical Response of Materials
- ECON 451 Gaming Theory (may not be used for general education elective credit)
- MA 301 Introduction to Proof Through Real Analysis
- MA 341 Foundations Through Analysis
- MA 353 Linear Algebra II with Applications
- MA 362 Topics in Vector Calculus
- MA 375 Introduction to Discrete Mathematics
- MA 416 Probability
- MA 421 Linear Programming and Optimization Techniques
- MA 425 Elements of Complex Analysis
- MA 428 Introduction to Fourier Analysis
- MA 440 Real Analysis (Honors)
- MA 450 Algebra (Honors)
- MA 453 Elements of Algebra I
- MA 454 Galois Theory (Honors)
- MA 460 Geometry
- MA 523 Introduction to Partial Differential Equations
- ME 579 Digital Signal Processing
- ME 586 Microprocessors in Electromechanical Systems
- ME 587 Engineering Optics
- ME 588 Mechatronics
- ME 597 Integrated Design of Electro-Mechanical Systems
- ECE 423 Electromechanical Motion Control
- MSTE 472 Vehicle Dynamics
- NUCL 200 Introduction to Nuclear Engineering
- NUCL 300 Nuclear Structure of Radiation Interactions
- NUCL 310 Introduction to Neutron Physics
- NUCL 402 Engineering of Nuclear Power Plants
- NUCL 460 Introduction to Controlled Thermonuclear Fusion
- NUCL 470 Fuel Cell Engineering
- NUCL 501 Nuclear Engineering Principles
- NUCL 504 Nuclear Engineering Experiments
- NUCL 510 Nuclear Reactor Theory I
- NUCL 560 Introduction to Fusion Technology
- NUCL 563 Direct Energy Conversion
- NUCL 570 Fuzzy Approaches In Engineering
- ME 581 Numerical Methods in Mechanical Engineering
- ABE 450 Finite Element Method in Design and Optimization
- CS 415 Computation Methods for Differential Equations
- CS 515 Numerical Analysis of Linear Systems
- IE 335 Operations Research – Optimization
- IE 535 Linear Programming
- IE 537 Discrete Optimization Models and Algorithms
- PHYS 310 Intermediate Mechanics
- PHYS 322 Intermediate Optics
- PHYS 330 Intermediate Electricity and Magnetism
- PHYS 342 Modern Physics
- PHYS 344 Modern Physics
- PHYS 360 Quantum Mechanics
- PHYS 422 Waves and Oscillations
- PHYS 560 Stellar Evolution
- PHYS 564 Introduction To Elements Particle Physics
- ME 413 Noise Control
- ME 518 Analysis of Thermal Systems
- IE 343 Engineering Economics
- IE 556 Job Design
- ME 430 Power Engineering
- ME 433 Principles of Turbomachinery
- ME 518 Analysis of Thermal Systems
- ECE 321 Electromechanical Motion Devices
- ECE 432 Elements of Power System Engineering
- NUCL 402 Engineering of Nuclear Power Systems
- BIOL 110 Fundamentals of Biology I
- BIOL 111 Fundamentals of Biology II
- BIOL 131 Biology II: Development, Structure, and Function of Organisms
- BIOL 201 Human Anatomy and Physiology
- BIOL 202 Human Anatomy and Physiology
- BIOL 203 Human Anatomy and Physiology
- BIOL 241-242 Biology IV: Genetics and Molecular Biology
- CHM 255 Organic Chemistry
- CHM 256 Organic Chemistry
- CHM 261 Organic Chemistry
- ME 433 Principles of Turbomachinery
- ME 434 Gas Turbines for Power and Propulsion
- ME 510 Gas Dynamics
- ME 533 Turbomachinery II
- ME 538 Air Breathing Propulsion
- AAE 339 Aerospace Propulsion
- AAE 439 Rocket Propulsion
- AAE 539 Advanced Rocket Propulsion
- ME 572 Analysis and Design of Robotic Manipulators
- ME 588 Mechatronics
- ECE 321 Electromechanical Motion Devices
- MFET 248 Introduction to Robotics
- MFET 348 Advanced Industrial Robotics
Software Engineering for Manufacturing Automation
- ME 586 Microprocessors in Electromechanical Systems
- CS 307 Software Engineering I
- CS 565 Programming Languages
- ECE 362 Microprocessors Systems and Interfacing
- ECE373 Numerical Methods for Engineers
- CE 497 Civil Engineering Projects*
- ME 497 Mechanical Engineering Projects*
- ME 597 Advanced Mechanical Engineering Projects*
- AAE 490 Special Problems in Aero Engineering*
- EEE 495 Environmental and Ecological Engineering Projects*
- EEE 595 Environmental and Ecological Engineering Projects*
- IE 490 Special Topics in IE*
- LC 490 Humanities Informed Engineering Projects*
- STAT 350 Introduction to Statistics
- STAT 416 Probability
- STAT 417 Statistical Theory
- STAT 512 Applied Regression Analysis
- STAT 513 Statistical Quality Control
- STAT 514 Design of Experiments
- ME 489 Finite Element Analysis
- ME 582 Thermal Stress Analysis
- AAE 553 Elasticity in Aerospace Engineering
- CE 595 Finite Elements in Elasticity
- ME 489 Finite Element Analysis
- AAE 352 Structural Analysis
- CE 371 Structural Analysis I
- CE 474 Structural Analysis II
- CE 570 Advanced Structural Mechanics
- CE 573 Structural Dynamics
- ME 500 Advanced Thermodynamics
- ME 501 Statistical Thermodynamics
- AAE 519 Hypersonic Aerothermodynamics
- CE 412 Building Envelope Design and Thermal Loads
- CHM 373 Physical Chemistry
- ME 433 Principles of Turbomachinery
- ME 434 Gas Turbines for Power and Propulsion
- ME 533 Turbomachinery II
- ME 538 Air Breathing Propulsion
- AAE 372 Jet Propulsion Power Plants
- ME 513 Engineering Acoustics
- ME 563 Mechanical Vibrations
- ME 575 Theory and Design of Control Systems
- ME 580 Nonlinear Engineering Systems
- AAE 340 Dynamics and Vibrations
- CE 573 Structural Dynamics
Comprehensive List of Technical Electives
AAE 251 Introduction to Aerospace Design
AAE 301 Signal Analysis for Aerospace Engineering
AAE 334 Aerodynamics
AAE 338 Thermal Sciences
AAE 339 Aerospace Propulsion
AAE 340 Dynamics and Vibrations
AAE 35103 Aerospace Systems Design
AAE 352 Structural Analysis
AAE 364 Control System Analysis
AAE 412 Introduction to Computational Fluid Dynamics
AAE 418 Zero-Gravity Flight Experiment
AAE 421 Flight Dynamics and Control
AAE 439 Rocket Propulsion
AAE 490 Special Problems in Aero Engineering (Must have approval from Undergraduate Office prior to registering for course)
AAE 512 Computational Aerodynamics
AAE 514 Intermediate Aerodynamics
AAE 519 Hypersonic Aerothermodynamics
AAE 520 Experimental Aerodynamics
AAE 532 Orbit Mechanics
AAE 539 Advanced Rocket Propulsion
AAE 550 Multidisciplinary Design Optimization
AAE 553 Elasticity in Aerospace Engineering
AAE 555 Mechanics of Composite Materials
AAE 564 Systems Analysis and Synthesis
ABE 330 Design of Machine Components
ABE 336 All-Terrain Vehicle Design
ABE 435 Hydraulic Control Systems for Mobile Equipment
ABE 450 Finite Element Method in Design and Optimization
ABE 460 Sensors and process Control
ABE 48600 Agricultural Engineering Design
ABE 501 Welding Engineering
ASM 345 Power Units and Power Trains
ASTR 363 The Solar System
ASTR 364 Stars and Galaxies
ASTR 370 Cosmology
BIOL 110 Fundamentals of Biology I (if not taken for science elective)
BIOL 111 Fundamentals of Biology II (if not taken for science elective)
BIOL 121 Biology I: Diversity, Ecology, and Behavior
BIOL 131 Biology II: Development, Structure, and Function of Organisms
BIOL 203 Human Anatomy and Physiology
BIOL 230 The Biology of the Living Cell
BIOL 231-232 Biology II: Cell Structure and Function
BIOL 241-242 Biology IV: Genetics and Molecular Biology
BME 204 Biomechanics of Hard and Soft Tissues
BME 540 Biomechanics
BME 551 Tissue Engineering
BME 562 Regulatory Issues Surrounding Approval Of Biomedical Devices
CE 222 Lifecycle Engineering and Management of Constructed Facilities
CE 311 Architectural Engineering
CE 32201 Project Control and Life Cycle Execution of Constructed Facilities
CE 340 Hydraulics (does not qualify)
CE/EEE 350 Introduction to Environmental and Ecological Engineering
CE 355 Engineering Environmental Sustainability
CE 361 Transportation Engineering
CE 371 Structural Analysis I
CE 413 Building Envelope Design and Thermal Loads
CE 414 Building Mechanical and Electrical System Design
CE 440 Urban Hydraulics
CE/EEE 456 Water and Wastewater Treatment
CE 457 Air Pollution Control and Design
CE 463 Highway Transportation Characteristics
CE 470 Structural Steele Design
CE 473 Reinforced Concrete Design
CE 474 Structural Analysis II
CE 479 Design of Building Components and Systems
CE 497 Civil Engineering Projects (must have approval from the Undergraduate Office)
CE 513 Lighting of Buildings
CE 51401 Building Controls
CE 51501 Building Energy Audits
CE 524 Legal Aspects in Engineering Practice
CE 540 Open Channel Hydraulics
CE 542 Hydrology
CE 557 Air Quality Management
CE 560 Public Mass Transportation
CE 563 Airport Design
CE 570 Advanced Structural Mechanics
CE 573 Structural Dynamics
CE 595 Finite Elements in Elasticity
CE 59601 Entrepreneurship and Business Strategy in Engineering
CE 59801 Breakthrough Thinking For Complex Challenges
CHE 461 Biomedical Engineering
CHE 597 Analytical Approach to Healthcare Delivery Tech Elective
CHM 255 Organic Chemistry
CHM 25501 Organic Chemistry Lab
CHM 256 Organic Chemistry
CHM 25601 Organic Chemistry Lab
CHM 261 Organic Chemistry
CHM 373 Physical Chemistry
CNIT 280 Systems Analysis and Design Methods
CNIT 315 Systems Programming
CNIT 320 Policy Regulation and Globalization in Information Technology
CNIT 325 Object-Oriented Application Development
CNIT 480 Managing Information Technology Projects
CNIT 372 Database Programming
CNIT 392 Enterprise Data Management
CS 240 Programming in C
CS 250 Computer Architecture
CS 251 Data Structures and Algorithms
CS 252 Systems Programming
CS 307 Software Engineering I
CS 314 Numerical Methods
CS 334 Fundamentals Of Computer Graphics
CS 348 Information Systems
CS 352 Compilers: Principles and Practice
CS 354 Operating Systems
CS 381 Introduction to the Analysis of Algorithms
CS 471 Introduction to Artificial Intelligence
CS 514 Numerical Analysis
CS 515 Numerical Analysis of Linear Systems
CS 565 Programming Languages
EAPS 225 Physics of Climate
EAPS 421 Atmospheric Thermodynamics
EAPS 422 Atmospheric Dynamics I
EAPS 423 Atmospheric Dynamics II
ECE 20002 Linear Circuit Analysis II
ECE 20875 Python for Data Science
ECE 255 Introduction to Electronics Analysis and Design
ECE 264 Advanced C Programming
ECE 270 Introduction to Digital System Design
ECE 30010 Introduction to Machine Learning and Pattern Recognition
ECE 301 Signals and Systems
ECE 302 Probabilistic Methods in Electrical Engineering
ECE 311 Electric and Magnetic Fields
ECE 321 Electromechanical Motion Devices
ECE 362 Microprocessor Systems and Interfacing
ECE 423 Electromechanical Motion Control
ECE 432 Elements of Power System Engineering
ECE 433 Power Electronics
ECE 51018 Hybrid Electric Vehicles
ECE 50632 Introduction to Quantum Transport
ECON 451 Gaming Theory (may not be used for general education elective credit)
ECON 461 Industrial Organization (may not be used for general education elective credit)
ECON 471 Behavioral Economics (may not be used for general education elective credit)
EEE 230 Engineering Economics And Environment
EEE 430 Industrial Ecology and Life Cycle Analysis
EEE 495 Environmental and Ecological Engineering Projects*(Must have approval from Undergraduate Office)
EEE 530 LCA: Principles and Applications
EEE 595 Environmental and Ecological Engineering Projects(Must have approval from Undergraduate Office)
ENGL 421 Technical Writing (may not be used for general-education elective credit)
ENGL 49000 - Worksite Internship Practicum
ENGR 305 Fundamentals of Innovation Theory and Practice
ENGR 39697 Global Design Projects
ENGR 37920 Junior Part in VIP
ENGR 47920 Senior Part in VIP
ENGR 49001 Breakthrough Thinking for Complex Challenges
ENGR 49000 Humanities Informed Engineering Projects
ENTR 310 Marketing and Management for New Ventures
ENTR 315 Business Planning for Social Entreprenurship
EPCS 301 Jr. Participation in Engineering Projects in Community Service (EPICS) - 1 Credit
EPCS 302 Jr. Participation in Engineering Projects in Community Service (EPICS) - 2 Credits
EPCS 401 Sr. Participation in Engineering Projects in Community Service (EPICS) - 1 Credit
EPCS 402 Sr. Participation in Engineering Projects in Community Service (EPICS) - 2 Credits
FNR 586 Urban Ecology
HSCI 312 Radiation Science Fundamentals
IE 330 Probability & Statistics in Engineering II
IE 335 Operations Research - Optimization
IE 343 Engineering Economics
IE 370 Manufacturing Processes I (IE 370 and ME 363 cannot both be taken for Elective Credit)
IE 470 Manufacturing Processes II
IE 472 Imagine, Model, Make
IE 490 Special Topics in IE* Must have approval from Undergraduate Office prior to registering for course
IE 530 Quality Control
IE 535 Linear Programming
IE 537 Discrete Optimization Models and Algorithms
IE 556 Job Design
IE 570 Manufacturing Process Engineering
IE 577 Human Factors in Engineering
IE 578 Applied Ergonomics Tech Elective
LC 490 Humanities Informed Engineering Projects
MA 301 Introduction to Proof Through Real Analysis
MA 341 Foundations Through Analysis
MA 353 Linear Algebra II with Applications
MA 35301 Linear Algebra II
MA 362 Topics in Vector Calculus
MA 375 Introduction to Discrete Mathematics
MA 416 Probability
MA 421 Linear Programming and Optimization Techniques
MA 425 Elements of Complex Analysis
MA 428 Introduction to Fourier Analysis
MA 440 Real Analysis (Honors)
MA 442 Multivariate Analysis (Honors)
MA 450 Algebra (Honors)
MA 453 Elements of Algebra I
MA 454 Galois Theory (Honors)
MA 460 Geometry
MA 510 Vector Calculus
MA 511 Linear Algebra
MA 523 Introduction to Partial Differential Equations
MA 527 Advanced Mathematics for Engineers and Physicists I
MFET 248 Introduction to Robotics
MFET 344 Automated Manufacturing Processes
MFET 348 Advanced Industrial Robotics
MGMT 201 Management Accounting I
MGMT 254 Legal Foundations of Business I
MGMT 304 Introduction to Financial Management
MGMT 310 Financial Management
MGMT 323 Introduction to Market Analysis
MGMT 324 Marketing Management
MGMT 350 Intermediate Accounting I
MGMT 351 Intermediate Accounting II
MGMT 352 Strategic Management
MGMT 391 Strategic Thinking And Decision-Making
MGMT 44301 Management of Human Resources
MGMT 44810 Technology Strategy
MGMT 455 Legal Background of Business I
MGMT 488 Data Driven Decisions in Digital Markets
MSE 240 Processing and Properties of Materials
MSE 260 Thermodynamics of Materials
MSE 270 Atomistic Materials Science
MSE 330 Processing and Properties of Materials
MSE 335 Materials Characterization Laboratory
MSE 370 Electrical, Optical, & Magnetic Properties of Materials
MSE 382 Mechanical Response of Materials
MSTE 472 Vehicle Dynamics
NS 212 Naval Weapon Systems
NS 350 Naval Ship Systems
NUCL 200 Introduction to Nuclear Engineering
NUCL 300 Nuclear Structure of Radiation Interactions
NUCL 310 Introduction to Neutron Physics
NUCL 402 Engineering of Nuclear Power Plants
NUCL 460 Introduction to Controlled Thermonuclear Fusion
NUCL 470 Fuel Cell Engineering
NUCL 501 Nuclear Engineering Principles
NUCL 504 Nuclear Engineering Experiments
NUCL 510 Nuclear Reactor Theory I
NUCL 560 Introduction to Fusion Technology
NUCL 563 Direct Energy Conversion
NUCL 570 Fuzzy Approaches In Engineering
OBHR 330 Introduction to Organizational Behavior
PHYS 310 Intermediate Mechanics
PHYS 322 Intermediate Optics
PHYS 330 Intermediate Electricity and Magnetism
PHYS 342 Modern Physics
PHYS 344 Modern Physics
PHYS 360 Quantum Mechanics
PHYS 422 Waves and Oscillations
PHYS 560 Stellar Evolution
PHYS 564 Introduction To Elements Particle Physics
PSY 577 Human Factors In Engineering
STAT 350 Introduction to Statistics
STAT 416 Probability
STAT 417 Statistical Theory
STAT 511 Statistical Methods
STAT 512 Applied Regression Analysis
STAT 513 Statistical Quality Control
STAT 514 Design of Experiments
SYS 300 It's A Complex World - Addressing Global Challenges
SYS 350 Systems Theories and Approaches
SYS 400 Systems Praxis Tech Elective
VIP 37920 Junior Participation in VIP
VIP 37930 Junior Participation in VIP Ext
VIP 47920 Senior Participation in VIP
VIP 47930 Senior Participating in VIP Ext
Looking for lists of Mechanical Engineering Electives? Click here