Preliminary Exam Seminar: Samuel Blankenship
"Ceramic Manufacturing for Rotating Detonation Engines"
Samuel Blankenship, MSE PhD Candidate
Advisors: Profs. Jeff Youngblood & Rod Trice
ABSTRACT
Rotating detonation engines (RDEs) are a key developing propulsion technology which promises large efficiency gains compared to existing gas-turbine engine designs through a continuously propagated detonation wave in a toroidal combustion chamber. Rather than relying on blade-driven compression stages which must be powered by parasitizing some of a gas turbine engine’s thrust, an RDE uses a sustained detonation wave to both compress and detonate the fuel. While current gas-turbine engine design has stagnated due to designs hitting the limits of material science, RDEs are a new method of propulsion which can already outperform gas-turbine engines in some respects as an immature technology. Unfortunately, most RDEs are too complex in their current state to be mounted to aircraft or spacecraft because the existing solution for thermal regulation is to rapidly cool a highly conductive copper alloy with high flow rates of liquid nitrogen.
High temperature ceramics hope to replace this thermal protection system with a hot structure approach, where the structural materials of the RDE can simply radiate off the heat without melting. To this end, new approaches for ceramic manufacturing are necessary to reduce cost while keeping the tolerances required for such a complex piece of technology. Material extrusion (MEX) provides a convenient and cost-effective method of near-net shape ceramic production which can also align fibers if used to produce chopped fiber CMCs. While its resolution limits prevent it from being able to serve as a solution for RDE component manufacturing alone, unsintered body machining (UBM) provides an equally low-cost method of achieving the desired geometry tolerances for non-critical surfaces.
While UBM has great promise in this area, the field is extremely immature and will require a push towards a standard set of characterization procedures to ensure the effectiveness and relative properties of green and brown bodies. Flexure testing, hardness testing, surface roughness measurement, and residual stress measurement are all promising methods of unsintered body characterization, as they can be used on a very wide range of materials and serve as good methods of predicting machinability and surface damage from machining.
2026-11-03 13:00:00 2026-11-03 16:30:00 America/Indiana/Indianapolis Preliminary Exam Seminar: Samuel Blankenship ARMS 2326