Preliminary Exam Seminar: Benjamin C. Gwinnell
"Effect of Cross-Sectional Geometry and Casting Velocity on Strain and Recrystallization in Single-Crystal Ni-Based Superalloy Casting"
Benjamin C. Gwinnell, MSE PhD Candidate
Advisors: Kevin Trumble & Matthew J. M. Krane
ABSTRACT
Single-crystal nickel-based alloys have historically been the standard for jet turbine blades in the aerospace industry, but many defects can still occur in single-crystal castings. One of the most difficult defects to observe is recrystallization. Rough handling after casting but before heat treatment can accumulate strain. The buildup of strain leads to recrystallization only after a part undergoes a solutioning heat treatment, making it difficult to identify in the as-cast structure. Recrystallization introduces grain boundaries that are prone to creep in extreme environments, thus weakening the turbine blade. However, a second, less understood mechanism is thermal strain induced during casting and solidification. This paper examines how changes in cross-sectional geometry and casting velocity affect strain and microstructure during solidification. These casting parameters govern the curvature of the liquidus isotherm, which is critical to the solidification geometry, dendrite structure, and thermal strain. The paper also examines the fundamentals of solidification and its influence on recrystallization, evaluates the accuracy of existing recrystallization theories in single-crystal castings, and assesses potential solutions, such as varying casting velocity as a function of part geometry and adding mechanisms to flatten the isotherm curvature. Ultimately, this analysis concludes that the reviewed literature currently lacks the quantitative link across casting velocity, part geometry, and the thermal strain fields needed to fully understand intrinsic recrystallization.
2026-11-17 14:00:00 2026-11-17 15:00:00 America/Indiana/Indianapolis Preliminary Exam Seminar: Benjamin C. Gwinnell HAMP 2102