September 22, 2021

Opportunities at TUV SUD America in RF/MRI Safety domain

Position Type: Research
Priority: No
Degree Requirement: BS, MS, PhD

Opportunities at TUV SUD America in RF/MRI Safety domain

My name is Krishna Singhal, currently, I lead the MRI characterization lab at TÜV SÜD America located in New Brighton (Minneapolis), MN. The reason I am reaching out is because we have exciting opportunities in the RF/EM/MRI Safety domain at BS, MS, and Ph.D. levels. It will be great if you can pass on this information to our students in ECE and possibly in the BME department. Job location is Minneapolis and sponsorship will be provided for selected individuals. Our team is responsible for the characterization of medical devices for MRI Safety. The ideal candidate will be someone who has hands-on experience in the RF/microwave lab and has taken ECE 604 course. MRI physics background is not needed but preferred. Interested candidates can contact me directly at my email address, Krishna.Singhal@tuvsud.com.
 
Krishna Singhal, Ph.D.
Technical lead, MRI Safety
JOB TITLE: Sr. Hardware Engineer, MRI Safety (all levels)
 
SUPERVISES: None
 
OVERALL RESPONSIBILITIES:
The Sr. Hardware Engineer will work on the development and evaluation of medical device MRI safety. This is a dynamic position requiring creativity, drive, flexibility.  This position will be responsible for setting up capabilities and developing test methodologies for the MRI lab
 
ESSENTIAL FUNCTIONS:
  • Execution of tests and evaluation of results in the radiated environment (Radiated Testing, Damage testing, Anechoic chamber measurements, etc) for medical devices (Active Implants and Passive Implants)
  • Perform Numerical electromagnetics simulations to model temperature effects of MRI. (using HFSS, COMSOL, Sim4life etc)
  • Design, Develop and document testing procedures and reports related to the above medical devices
  • Clearly Communicate ideas, problems, and solutions to the engineering team.
  • Use considerable judgment, high degree of initiative, creative approaches in troubleshooting, and making recommendations for continuous improvement of work methods for functional areas.
  • Performs other related duties as assigned.
  • Fixture design for MRI activities.
ADDITIONAL RESPONSIBILITIES:
Support the TÜV SÜD America vision and mission statement. Adhere to all TÜV SÜD America policies and procedures as outlined in the various Corporate Policies and the Employee Handbook.  All employees are responsible for general cooperation and support of all TÜV locations.  All employees are expected to work in a manner that supports a safe and healthy work environment for themselves and others.  This includes following established rules, policies and practices of environmental, health and safety in the workplace.
 
DISCLAIMER:
The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification.  They are not intended to be interpreted as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position.
 
TÜV SÜD America is an equal opportunity employer.  
 
JOB QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential function satisfactorily.  The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
KNOWLEDGE, SKILLS, AND ABILITIES:
  • Knowledge and experience with working in shielded rooms (eg: EMC Testing), with oscilloscopes, function generators, vector network analyzers, amplifiers, thermometry, multimeters, etc.
  • Demonstrated ability to work independently and in a team environment.
  • Demonstrated, excellent oral and written communication skills.
  • Self-starter with a positive outlook and motivated attitude.
  • Ability to prioritize work by determining the sequencing and timing of different jobs based on precedence and importance.
  • Knowledge of Microsoft Office
REQUIRED:
  • Bachelor’s degree with 2+ years of experience in an engineering discipline with a background in Electromagnetics/RF/Electrical engineering. Advanced degree (M.S or Ph.D.) preferred.
PREFERRED BUT NOT REQUIRED:
  • Experience working in EMC/RF safety of regulated industry environment: Aerospace, Medical Device, Automotive, etc
  • Experience with SAR Testing, Easy6-DAE etc
  • Experience in the measurement of E field, H field, SAR, Temperature rises etc
  • 3D CAD modeling/Solidworks skills or equivalent.
  • Experience in Multiphysics simulations (using applications such as ANSYS, Sim4life etc)
BONUS POINTS:
  • Familiarity with MRI safety standards for implantable medical devices ISO 10974 and ASTM 2182
  • Knowledge of MRI physics: RF Heating, Force/Torque Testing, etc.
This job specification should not be construed to imply that these requirements are the exclusive standards of the position. Incumbents will follow any other instructions and perform any other related duties as may be required.
 
Title and compensation will be commensurate with experience and qualifications.
 

 

Attachments