Adding the Birck Canon Printers to a Non-ECN supported Windows PC

1.  First you need the driver, it's about a 50meg download.  You can download from the link below:

        http://www.canon.ca/buzdownloads/ccdps3_2kxp2k3vistas_ps3_0462_e.zip

If the above direct link does not work, follow these steps:

1. Go to http://www.canon.ca
2. Select "English"
3. Click on the "Downloads" button on the top row of options
4. Click on the "Click here" link under "Office Products"
5. Agree to the copyright/license agreement
6. Under B/W products pick: imageRUNNER 5070/5570/6570
7. Download the driver with the description that reads: imageRUNNER 5070/5570/6570 PS3 driver for Windows 2000 XP 2003 Vista (Setup)
8. Follow the rest of the instructions listed below

2.  Now extract the file to a temporary location, (For instance. c:\temp\canon)

3.  Go to C:\temp\canon, double-click: setup.exe

4.  Now click "next", then "yes" to accept the license agreement

5.  Now click "Manually Set Port to Install", then hit "next"

6.  Now select "Add Printers", then click "next"

7.  Now select "Canon iR5570/iR6570 PS3", then select "Add", now press "Next"

8.  Now on the top of the window select "Add Port", then "Standard TCP/IP Port"

9.  In this wizard, just press "next"

10. Type in the IP of the printer

"128.210.51.244" without the quotes for BRK-1222

"128.210.51.245" without the quotes for BRK-1022

"128.210.51.246" without the quotes for BRK-2020

Note: BRK-1222 is a restricted printer (Access to this printer is ONLY given by the Birck Business Office)

11.  Select finish to close the "TCP/IP wizard"

12.  Here you can give the printer a different name if you want, and set "Set as default" if you want it to be the default printer.

13.  Now you hit "Start", then "Yes" to start the installation

To enable job accounting, please follow the directions below:

1.  Go to: Start-->Settings-->Control Panel-->Printers and Faxes

2.  Right-click on the printer (This will be whatever you named it ex. BRK-1222), then select "Properties"

3.  Now select the "Device Settings" tab

4.  Click the box next to "Job Accounting".  Press "Apply" then "OK"

If you do not have a ID#, you can get one from the Birck business office.  You can repeat these steps for each printer (the model number is the same for the black and white printers).  Just remember to change the IP of the second printer.