• 1970
    • Osburn,  Carlton, “The Electrical Properties of Grain Boundaries in Nickel Oxide and Magnesium Oxide,” PhD Dissertation, August 1970. -
  • 2010
    • Rovekamp, Jr.,  Roger, “System Design in an Evolving System-of-Systems Architecture and Concept of Operations,” MS Thesis, December 2010. Daniel DeLaurentis
  • 2011
    • Stuart,  Jeffrey, “Fuel-Optimal Low-Thrust Transfers Between Libration Point Orbits,” MS Thesis, May 2011. K. Howell
  • 2010
    • Sindiy,  Oleg, “Model-Based System-of-Systems Engineering for Space-Based Command, Control, Communication, and Information Architecture Design,” PhD Dissertation, December 2010. Prof. Daniel DeLaurentis
    • Savai,  Merhernaz Percy, “A Graph Based Algorithm for Adaptable Dynamic Airspace Configuration for Nextgen,” MS Thesis, December 2010. Prof. Inseok Hwang
    • Shah,  Rashmi, “Analysis of the Correlation Properties of Digital Satellite Signals and Their Applicability in Bistatic Remote Sensing,” MS Thesis, December 2010. Prof. James Garrison
    • Walker,  Michael, “Extended Proagation GNSS Ephemerides Employing Measurements Fusion,” MS Thesis, December 2010. Prof. James Garrison
    • Gangestad,  Joseph, “Analytical Theory for Orbits of Electrostatically Charged Spacecraft and Direct Calculations of Planet-toPlanet Transfers,” PhD Dissertation, December 2010. Prof. James Longuski
    • Short,  Cody, “Langrangian Coherent Structures in the Circular Restricted Three-Body Problem,” MS Thesis, December 2010. Prof. Kathleen Howell
    • Nishiie,  Takayuki, “Experimantal and Kinetic Modeling Study of the Combustion of Jet-A adn S-8 Fuels in Laminar Premixed Flames,” MS Thesis, December 2010. Prof. Li Qiao
    • Ocampo,  Jaime, “Design, Manufacture, and Testing of the Armstrong Hall Microgravity Tower,” MS Thesis, December 2010. Prof. Steven Collicott
    • Berridge,  Dennis, “Measurements of Second-Mode Instability Waves in Hypersonic Boundary Layers with a High-Frequency Pressure Trransducer,” MS Thesis, December 2010. Prof. Steven Schneider
    • Chou,  Amanda, “Characterization of Laser-Generated Perturbations and Instability Measurements on a Flared Cone,” MS Thesis, December 2010. Prof. Steven Schneider
  • None
    • , “None,” MS Thesis, None None. Prof. W. Anderson
  • 2010
    • Kloster,  Kevin, “Interplanetary Mission Design Techniques for Flagship-Class Missions,” PhD Dissertation, December 2010. Prof.James Longuski
    • Weaver,  Andrew, “Analysis of Flowfield and Surface Heat Flux Uncertainties Under Typical Blunt-Body Re-entry Conditions,” MS Thesis, May 2010. Professor Alexeenko
  • 2008
    • Chigullapalli,  Sruti, “Application of High-Order Numerical Schemes for the Boltzmann Transport Equations to Non-Equilibrium Gas Flows,” MS Thesis, May 2008. Professor Alexeenko
  • 2010
    • Ganguly,  Arnab, “Simulation and Experiments of Low Pressure Water Vapor Flows Applied to Freeze-Drying,” MS Thesis, May 2010. Professor Alexeenko
    • Nabeth,  Jeremy, “Numerical Simulations of Knudsen Forces in Microsystems,” MS Thesis, May 2010. Professor Alexeenko
  • 2009
    • Guo,  Xiaohui, “Investigations of Microscale Fluid-Thermal Phenomena Based on the Deterministic Boltzmann-ESBGK Model,” PhD Dissertation, May 2009. Professor Alexeenko
  • 2008
    • Stein,  William, “Performance Characterization of a Radio-Frequency Capacitively Coupled Discharge Microthruster,” PhD Dissertation, August 2008. Professor Alexeenko/Hrbud
  • 1976
    • Yamada,  Shoji, “A Theoretical and Experimental Study of Strength and Its Distribution in Fiber-Reinforced Composites,” PhD Dissertation, May 1976. Professor Alspaugh
  • 1987
    • Harrison,  Garry, “An Experimental Investigation of the Flow Field Around A Counter-Rotating Propeller System Using a Laser Doppler Velocimeter,” PhD Dissertation, December 1987. Professor Alspaugh
  • 1978
    • Jones,  Brian W., “FLTSIM Flight Simulator A&AE Microcomputer System,” None Dissertation, August 1978. Professor Alspaugh
  • 2009
    • O'Hara,  Loral, “Investigation into an Unsteady Heat Release Model Applied to an Unstable Model Rocket Combustor,” MS Thesis, December 2009. Professor Anderson
  • 2007
    • Schuff,  Reuben, “Experimental Investigation of Asymmetric Heating in a High Aspect Ratio Cooling Channel,” MS Thesis, August 2007. Professor Anderson
  • 2009
    • Helderman,  David, “Measurement and Analysis in a Subscale Rocket Combustor,” MS Thesis, August 2009. Professor Anderson
  • 2008
    • Lee,  Joon, “Study of an Under-expanded Sonic Impinging Jet Array,” PhD Dissertation, August 2008. Professor Anderson
  • 2007
    • Droppers,  Lloyd, “Study of Heat Transfer in a Gaseous Hydrogen Liquid Oxygen Multi-Element Combustor,” MS Thesis, August 2007. Professor Anderson
  • 2003
    • Ali,  Syed, “Heterogeneous Decomposition of Hydrogen Peroxide and Its Stability Margin,” MS Thesis, December 2003. Professor Anderson
  • 2005
    • Briggs,  Eric, “Comparative Study of Pyrolytic Coking of JP-8 and JP-10 On Inconel and Stainless Steel Surfaces,” MS Thesis, December 2005. Professor Anderson
    • Jos,  Cyril, “Direct-Connect Testing of a Rocket Based Combined Cycle Engine,” MS Thesis, December 2005. Professor Anderson
    • Miller,  Kevin, “Experimental Study of Longitudinal Instabilities in a Single Element Rocket Combustor,” MS Thesis, May 2005. Professor Anderson
  • 2003
    • Mok,  Jong, “Investigation of Simultaneous Vaporization and Decomposition of Hydrogen Peroxide using Multiple Jets in Crossflow,” MS Thesis, December 2003. Professor Anderson
  • 2004
    • Nugent,  Nicholas, “Control and Data Acquisition System for Rocket Combustor Experimentation,” MS Thesis, August 2004. Professor Anderson
    • Pearson,  Nicholas, “Vaporization and Decomposition of Hydrogen Peroxide Droplets,” MS Thesis, August 2004. Professor Anderson
  • 2005
    • Pourpoint,  Timothée, “Hypergolic Ignition of a Catalytically Promoted Fuel with Rocket Grade Hydrogen Peroxide,” PhD Dissertation, December 2005. Professor Anderson
  • 2003
    • Sisco,  James, “Autoignition of Kerosene by Decomposed Hydrogen Peroxide in a Dump Combustor Configuration,” MS Thesis, August 2003. Professor Anderson
  • 2005
    • Yu,  Yen, “Liquid Film Cooling in a Model Combustor using Swirl Injection,” MS Thesis, August 2005. Professor Anderson
  • 2007
    • Sisco,  James, “Measurement and Analysis of an Unstable Model Rocket Combustor,” PhD Dissertation, August 2007. Professor Anderson
  • 2009
    • Yu,  Yen, “Experimental and Analytical Investigations of Longitudinal Combustion Instability in a Continuously Variable Resonance Combustor (CVRC),” PhD Dissertation, May 2009. Professor Anderson
  • 2006
    • Sung,  In-Kyung, “Fatigue Life Prediction of Liquid Rocket Engine Combustor with Subscale Test Verification,” PhD Dissertation, August 2006. Professor Anderson
    • Haberlen,  Philip, “Supercritical Fuel Film Cooling in a RP-1/Gox Staged Combustion Rocket,” MS Thesis, December 2006. Professor Anderson
    • Wennerberg,  Jason, “An Experiment to Study the Effects of Aspect Ratio on Rocket Thrust Chamber Cooling Channel Performance,” MS Thesis, August 2006. Professor Anderson
  • 2004
    • Martin III,  Thomas, “Infrared Spectroscopy for the Measurement of In-Situ Deposition of Thermally Stressed Hydrocarbon Fuels,” MS Thesis, August 2004. Professor Anderson
    • Long,  Matthew, “Swirl Injectors for Oxidizer-Rich Stages Combustion Cycle Engines and Hypergolic Propellants,” PhD Dissertation, August 2004. Professor Anderson
  • 2003
    • Hoshizaki,  Takayuki, “Tactical Strategies for Improving Accuracy in Optical Targeting Systems,” PhD Dissertation, December 2003. Professor Andrisani
  • 1984
    • Anderson,  Mark, “Closed Loop, Pilot/Vehicle Analysis of Approach and Landing,” MS Thesis, December 1984. Professor Andrisani
  • 1988
    • Bauer,  Jeffrey, “Identification of Equivalent Short Period Dynamics of the X-29A,” MS Thesis, December 1988. Professor Andrisani
  • 1984
    • Buethe,  Scott, “A Study of State-Rate Feedback Explicit Model-Following in its Application to V/STOL Aircraft,” MS Thesis, December 1984. Professor Andrisani
  • 2006
    • Chen,  Jit-Tat, “Use of a PID Control Structure to Design an Autopilot for an Autonomous Aircraft,” MS Thesis, May 2006. Professor Andrisani
  • 1985
    • Davidson, Jr.,  John, “Flight Control Synthesis for Flexible Aircraft Using Eigenspace Assignment,” MS Thesis, May 1985. Professor Andrisani
  • 1993
    • Dean,  Loren, “Methods for Resolving Visual Ambiguities During Optical Target Tracking,” MS Thesis, May 1993. Professor Andrisani
  • 1997
    • Davidson, Jr.,  John, “Lateral-Directional Eigenvector Flying Qualities Guidelines and Gain Weighted Eigenspace Assignment Methodology,” PhD Dissertation, May 1997. Professor Andrisani
  • 1993
    • Doman,  David, “An Experimental Study of Pilot/Vehicle Dynamics Using a Tilt Rotor Flying Machine,” MS Thesis, May 1993. Professor Andrisani
  • 2003
    • Garman,  Karl, “Design and Testing of a Portable Flight Test Instrumentation and Data Acquisition System for Aircraft,” MS Thesis, May 2003. Professor Andrisani
  • 1984
    • Gau,  Ching-Fu, “Recursive Partitioning Estimation,” PhD Dissertation, December 1984. Professor Andrisani
  • 1988
    • Gleason,  Daniel, “Analytical Techniques for Tracking Filter Implementation,” PhD Dissertation, December 1988. Professor Andrisani
  • 1993
    • Jones,  Mark, “A Feasibility Study of the Use of Axisymmetric Thrust Vectoring for Enhanced In-Flight Simulation,” MS Thesis, December 1993. Professor Andrisani
  • 1991
    • Kim,  Eung, “Robust Estimators for Target Tracking,” PhD Dissertation, December 1991. Professor Andrisani
  • 1988
    • Krozel,  James, “Search Problems in Mission Planning and Navigations of Autonomous Aircraft,” MS Thesis, May 1988. Professor Andrisani
  • 1992
    • Krozel,  James, “Intelligent Path Prediction for Vehicular Travel,” PhD Dissertation, May 1992. Professor Andrisani
  • 1987
    • Mavromatis,  Theofanis, “Target Tracking of Maneuvering Aircrafts and Tracker Parameter Optimization,” MS Thesis, May 1987. Professor Andrisani
  • 1998
    • Norris,  Stephen, “Longitudinal Equilibrium Solutions for a Towed Aircraft,” MS Thesis, August 1998. Professor Andrisani
  • 1992
    • Newman,  Brett, “Aerospace Vehicle Model Simplification for Feedback Control,” PhD Dissertation, August 1992. Professor Andrisani
  • 1990
    • O'Neal,  Patrick, “Design of a Roll Control System for a Smart Projectile Using Loop Transfer Recovery,” MS Thesis, May 1990. Professor Andrisani
  • 1999
    • Ryu,  Shiyang, “Longitudinal Flying Qualities and Controller Design for Nonlinear Aircraft,” PhD Dissertation, December 1999. Professor Andrisani
  • 1988
    • Schierman,  John, “Tracking Fixed Wing Aircraft and Helicopters Using Attitude and Rotor Angle Information,” MS Thesis, May 1988. Professor Andrisani
  • 1990
    • Schroeder,  Jeffery, “Design, Analysis, and Flight Test of Pilot Displays for Hovering Aircraft,” MS Thesis, December 1990. Professor Andrisani
  • 1991
    • Tao,  Xuefent, “The Generic Aircraft Tracker: Theory and Computer Implementation,” MS Thesis, December 1991. Professor Andrisani
  • 1992
    • Turner,  Simon, “A Feasibility Study Regarding the Addition of a Fifth Control to a Rotorcraft In-Flight Simulator,” MS Thesis, December 1992. Professor Andrisani
  • 1984
    • Waszak,  Martin, “Analysis of Flexible Aircraft Longitudinal Dynamics and Handling Qualities,” MS Thesis, May 1984. Professor Andrisani
  • 2008
    • Portillo,  Juan, “Nonparallel Analysis and Measurements of Instability Waves in a High-Speed Liquid Jet,” PhD Dissertation, August 2008. Professor Blaisdell
  • 2010
    • Gross,  Nico, “Assissment of Turbulence Models and Corrections with Applications to the Orion Launch Abort System,” MS Thesis, May 2010. Professor Blaisdell
  • 2003
    • Ananthula,  Vikram, “Computations of an Axial Vortex using Turbulence Models and Investigation of Rotation Corrections,” MS Thesis, December 2003. Professor Blaisdell
  • 1999
    • Bodony,  Daniel, “Turbulence Model Computations of an Axial Vortex,” MS Thesis, December 1999. Professor Blaisdell
  • 2003
    • Eshpuniyani,  Brijesh, “Flow Physics of Strained Turbulent Axial Vortices,” PhD Dissertation, December 2003. Professor Blaisdell
  • 1998
    • Qin,  Jim, “Numerical Simulations of a Turbulent Axial Vortex,” PhD Dissertation, December 1998. Professor Blaisdell
  • 1996
    • Spyropoulos,  Evangelos, “On Dynamic Subgrid-Scale Modeling for Large-Eddy Simulation of Compressible Turbulent Flows,” PhD Dissertation, December 1996. Professor Blaisdell
  • 1964
    • Sweet,  Arnold, “A Stochastic Model for Predicting the Subsidence of Granular Media,” PhD Dissertation, August 1964. Professor Bogdanoff
  • 1965
    • Bernard,  Michael, “Buckling of a Column with Random Displacements,” PhD Dissertation, January 1965. Professor Bogdanoff
  • 1973
    • Carnahan,  James, “An Analysis of Pedestrian Flow: A Simulation Model for an Aircraft Pier Arm,” PhD Dissertation, December 1973. Professor Bogdanoff
    • Kayser,  Kenneth, “A New Method For Estimation of Response in Complex Systems,” PhD Dissertation, December 1973. Professor Bogdanoff
  • 1970
    • Luo,  Siong Siu, “Discrete Series Synthesis of Randomly Excited Structural System Response,” PhD Dissertation, August 1970. Professor Bogdanoff
  • 1962
    • Soong,  Tsu-teh, “On the Dynamics of a Disordered Linear Chain,” PhD Dissertation, January 1962. Professor Bogdanoff
  • 1982
    • Kim,  Bong, “Approximate Methods for Dynamic Analysis of Large Structures,” PhD Dissertation, May 1982. Professor Bogdanoff/C.T. Sun
  • 2010
    • Chitsiriphanit,  Suvanit, “On Determination of Apparent Fracture Toughness and Frature Process Zone,” PhD Dissertation, May 2010. Professor C.T. Sun
  • 2009
    • Merrill,  Marriner, “A Nanolaminate Manufacturing Technique for Multifunctional Materials and Devices,” PhD Dissertation, May 2009. Professor C.T. Sun
  • 2008
    • Dong,  Zhaoxu, “Mechanical Behavior of Silica Nanoparticle-Impregnated Kevlar Fabrics,” PhD Dissertation, December 2008. Professor C.T. Sun
  • 2006
    • Nakaima,  Daniel, “Ductile Fracture of Polycarbonate,” MS Thesis, December 2006. Professor C.T. Sun
  • 2004
    • Achuthan,  Ajit, “Nonlinear Behavior of Ferroelectric Materials,” PhD Dissertation, August 2004. Professor C.T. Sun
  • 2001
    • Adams,  Douglas, “Effects of Lateral Confinement on the Static and Dynamic Strength of Brittle Materials,” PhD Dissertation, May 2001. Professor C.T. Sun
  • 1996
    • Adams,  Douglas, “Efficient Finite Element Modeling of Thin-Walled Structures with Constrained Viscoelastic Layer Damping,” MS Thesis, May 1996. Professor C.T. Sun
  • 2001
    • Agrawal,  Parul, “Micromechanical and Fracture Characteristics of Metal-Ceramic Composites,” PhD Dissertation, May 2001. Professor C.T. Sun
  • 2002
    • Aratama,  Shigeki, “The Static and Fatigue Characteristics of a Notched Hybrid Composite Laminate,” MS Thesis, August 2002. Professor C.T. Sun
  • 1999
    • Beaumont,  Matthew, “Characterization of Indalloy 227 Non Lead Solder,” PhD Dissertation, December 1999. Professor C.T. Sun
  • 1986
    • Berreth,  Steven, “A New End Tab Design for Off-Axis Tension Tests of Composite Materials,” MS Thesis, December 1986. Professor C.T. Sun
  • 2002
    • Bodily,  Brandon, “Mechanical Properties of Single-Walled Carbon Nanotubes by Modeling as Pin-Jointed Trusses,” MS Thesis, May 2002. Professor C.T. Sun
  • 1987
    • Cox,  Dennis, “Effect of Adhesive Layers on Impact Damage Using a Rubber Capped Impactor,” MS Thesis, May 1987. Professor C.T. Sun
  • 1988
    • Chu,  Gou-Don, “Reducing Free Edge Effect on Laminate Strength by Edge Modification,” MS Thesis, December 1988. Professor C.T. Sun
  • 1992
    • Chu,  Gou-Don, “Free Edge and Size Effects on Failure Initiation and Ultimate Strength of Laminates Containing a Center Hole,” PhD Dissertation, August 1992. Professor C.T. Sun
  • 2000
    • Cho,  Jeongmin, “Modeling and Lowering Thermal Residual Stresses in Bonded Composite Repairs of Metallic Aircraft Structure,” MS Thesis, May 2000. Professor C.T. Sun
  • 1989
    • Chien,  Lung-Siaen, “Parallel Computational Methods on Structural Mechanics Analysis,” PhD Dissertation, December 1989. Professor C.T. Sun
  • 1987
    • Chin,  Hsiang, “Effect of Bending-Extension Coupling on the Deformation of Asymmetric Laminates,” PhD Dissertation, August 1987. Professor C.T. Sun
  • 1984
    • Chen,  Jinn-Kuen, “Nonlinear Analysis of Composite Laminates,” PhD Dissertation, May 1984. Professor C.T. Sun
  • 1988
    • Chen,  Gang, “Nonlinear Finite Element Analysis of Plates and Shells of Composite Laminates,” MS Thesis, December 1988. Professor C.T. Sun
  • 2004
    • Chang,  I-Ling, “Simulation of Mechanical Behavior of Nanomaterials by Molecular Statics,” PhD Dissertation, August 2004. Professor C.T. Sun
  • 1999
    • Chang,  I-Ling, “Domain Switching Effect on Fracture and Fatigue Behavior of Piezoelectric Materials,” MS Thesis, August 1999. Professor C.T. Sun
  • 2005
    • Deo,  Amitabh, “Effect of Shape and Thickness on Properties of Short Fiber Composites,” MS Thesis, May 2005. Professor C.T. Sun
  • 1989
    • Gates,  Thomas, “An Elastic/Viscoplastic Constitutive Model For Fiber Reinforced Thermoplastic Composites,” PhD Dissertation, August 1989. Professor C.T. Sun
  • 1983
    • Gates,  Thomas, “Acoustic Emission Behavior in 3D Carbon/Carbon Composites,” MS Thesis, May 1983. Professor C.T. Sun
  • 1993
    • Georgiou,  Iannis, “Nonlinear Dynamics and Chaotic Motions of a Singularly Perturbed Nonlinear Viscoelastic Beam,” MS Thesis, December 1993. Professor C.T. Sun
  • 1982
    • Grady,  Joseph, “Use of Cracked Beam Finite Elements to Estimate Stress Intensity Factors,” MS Thesis, August 1982. Professor C.T. Sun
  • 1985
    • Grady,  Joseph, “Dynamic Delamination Crack Propagation in a Graphite/Epoxy Laminate,” PhD Dissertation, December 1985. Professor C.T. Sun
  • 1997
    • Guo,  Cheng, “Dynamic Delamination of Composites,” PhD Dissertation, August 1997. Professor C.T. Sun
  • 2000
    • Han,  Chenghua, “Dynamic Response and Failure in Layered Structures and Composites,” PhD Dissertation, December 2000. Professor C.T. Sun
  • 1994
    • Harrington,  Brian, “Failure Initiation and Ultimate Strength of Composite Laminates Containing a Center Elliptical Hole,” MS Thesis, May 1994. Professor C.T. Sun
  • 1998
    • Hasebe,  Ryoichi, “Performance of Sandwich Structures with Composite Reinforced Core,” MS Thesis, December 1998. Professor C.T. Sun
  • 2001
    • Hu,  Huiwen, “Modeling Physical Aging in Polymeric Composites,” PhD Dissertation, August 2001. Professor C.T. Sun
  • 1999
    • Hua,  Yuan, “Effective Crack Growth Model and Pseudo Three Dimensional Analysis of Composite Laminates,” MS Thesis, MS 1999. Professor C.T. Sun
  • 1988
    • Jen,  Kwang-Chi, “On the Effect of Matrix Cracks on Laminate Strength,” PhD Dissertation, December 1988. Professor C.T. Sun
  • 1998
    • Jiang,  Longzhi, “Fracture and Fatigue Behavior of Piezoelectric Materials,” PhD Dissertation, May 1998. Professor C.T. Sun
  • 1985
    • Jih,  Chan-Jiun, “The Evaluation of Stress Intensity Factors by Finite Element Method,” MS Thesis, December 1985. Professor C.T. Sun
  • 1991
    • Jih,  Chan, “Analysis of Delamination in Composite Laminates under Low Velocity Impact,” PhD Dissertation, December 1991. Professor C.T. Sun
  • 1985
    • Joshi,  Shiv, “Impact Damage Characterization in Laminated Composites,” PhD Dissertation, August 1985. Professor C.T. Sun
  • 1993
    • Jun,  Alexander, “Compressive Strength of Unidirectional Fiber Composites With Matrix Nonlinearity,” PhD Dissertation, August 1993. Professor C.T. Sun
  • 1975
    • Kelley,  John, “A Complete Nonconforming Convergent Displacement Formulated Singular Finite Element for Linear Elastic Static and Dynamic Loading Crack Problems,” PhD Dissertation, December 1975. Professor C.T. Sun
  • 1984
    • Kelly,  Scott, “Characterization of Mechanical Properties of a Fiberglass Composite,” MS Thesis, August 1984. Professor C.T. Sun
  • 1987
    • Kelly,  Scott, “Failure Analysis of Laminated Composite Angles,” PhD Dissertation, May 1987. Professor C.T. Sun
  • 1996
    • Kim,  Hong-On, “Elastic-Plastic Fracture Analysis for Small Scale Yielding,” PhD Dissertation, August 1996. Professor C.T. Sun
  • 1994
    • Klug,  John, “Efficient Modeling of Postbuckling Delamination Growth in Composite Laminates Using Plate Elements,” MS Thesis, August 1994. Professor C.T. Sun
  • 1993
    • Kurtz,  Russell, “Analysis of Bimaterial Crack Problems in the Presence of Friction,” PhD Dissertation, August 1993. Professor C.T. Sun
  • 2000
    • Kwon,  Soonwook, “Characteristics of Three-Dimensional Stress Fields in Cracked Plates Under General Loadings,” PhD Dissertation, August 2000. Professor C.T. Sun
  • 1995
    • Lena,  Michael, “Repair and Reinforcement of Cracked Aluminum Plates with Adhesively Bonded Composite Patches,” MS Thesis, May 1995. Professor C.T. Sun
  • 1992
    • Lee,  Shi-Wei, “Investigation and Modeling of Penetration Process for Composite Laminates Impacted by a Blunt-Ended Projectile,” PhD Dissertation, August 1992. Professor C.T. Sun
  • 1999
    • Li,  Chunsu, “Analysis of Cracks in Thin Layers,” MS Thesis, December 1999. Professor C.T. Sun
  • 1991
    • Liao,  Wei-Chong, “Analysis of Thick Section Composite Laminates,” PhD Dissertation, May 1991. Professor C.T. Sun
    • Luo,  Jiayi, “Methods of Analysis for Thick-Section Composite Structures,” PhD Dissertation, August 1991. Professor C.T. Sun
  • 2001
    • Maley,  Scott, “Particulate Enhanced Damping of Sandwich Structures,” PhD Dissertation, August 2001. Professor C.T. Sun
  • 1990
    • Mao,  Kunming, “A Global-Local Structural Analysis Method,” PhD Dissertation, August 1990. Professor C.T. Sun
  • 1996
    • McCoy,  Robert, “Dynamic Analysis of a Thick-Section Composite Cylinder Subjected to Underwater Blast Loading,” PhD Dissertation, December 1996. Professor C.T. Sun
  • 1979
    • Miller,  Ronnie, “Acoustic Emission: An Application to Fracture Mechanics,” PhD Dissertation, May 1979. Professor C.T. Sun
  • 2005
    • Merrill,  Marriner, “Development of a Simple and Inexpensive Method for Manufacturing High Quality Nanoparticle/Polymer Nanocomposites,” MS Thesis, December 2005. Professor C.T. Sun
  • 1987
    • Necib,  Brahim, “Continuum Modeling and Dynamic Analysis of Large Truss Structures,” PhD Dissertation, May 1987. Professor C.T. Sun
  • 1986
    • Norman,  Timothy, “Transverse Impact of Stiffened Laminated Composite Panels,” MS Thesis, December 1986. Professor C.T. Sun
  • 1989
    • Norman,  Timothy, “The Controlled-Damage Concept in Design of Laminated Composites,” PhD Dissertation, August 1989. Professor C.T. Sun
  • 1999
    • Ninan,  Lal, “High Strain Rate Characterization of Off-Axis Composites Using Split Hopkinson Pressure Bar,” MS Thesis, May 1999. Professor C.T. Sun
  • 1994
    • O'Donnell,  Sean, “Low Cycle Plasticity of IM7/8320 Thermoplastic Composite,” MS Thesis, August 1994. Professor C.T. Sun
  • 1995
    • Pandey,  Ravindra, “Mechanics of Formation of Wrinkles During the Processing of Thermoplastic Composites,” PhD Dissertation, December 1995. Professor C.T. Sun
  • 1994
    • Park,  Seungbae, “Fracture Behavior of Piezoelectric Materials,” PhD Dissertation, August 1994. Professor C.T. Sun
  • 1984
    • Pollock,  Peter, “A Study of Failure in 3-D Carbon-Carbons,” PhD Dissertation, May 1984. Professor C.T. Sun
  • 1995
    • Potti,  Shyam, “High Velocity Impact and Penetration of Thick Composite Laminates,” PhD Dissertation, December 1995. Professor C.T. Sun
  • 1997
    • Qian,  Wenqi, “Interfacial Cracks in Isotropic and Anisotropic Media with Friction,” PhD Dissertation, May 1997. Professor C.T. Sun
  • 2001
    • Rangarajan,  Balaji, “Characterization of Crack Growth in Elastic-Plastic Materials,” MS Thesis, August 2001. Professor C.T. Sun
  • 1993
    • Quinn,  Brian, “Comparative Evaluation of Failure Analysis Methods for Composite Laminates,” MS Thesis, December 1993. Professor C.T. Sun
  • 1999
    • Roeder,  Blayne, “Impact of Thermally Confined Alumina/Aluminum Laminates: Experiments and Modeling,” MS Thesis, May 1999. Professor C.T. Sun
  • 1991
    • Rui,  Yuting, “Elastic-Plastic Behavior of Thermoplastic Composites Under Cyclic Loadings,” PhD Dissertation, August 1991. Professor C.T. Sun
  • 1984
    • Sankar,  Bhavani, “Contact Behavior, Impact Response and Damage in Graphite-Epoxy Laminates Subjected to Initial Stresses,” PhD Dissertation, May 1984. Professor C.T. Sun
  • 1994
    • Stokman,  William, “Design and Characterization of Fiber/Metal Laminate Composite Materials,” MS Thesis, May 1994. Professor C.T. Sun
  • 1996
    • Su,  Xuming, “Three-Dimensional Effects in Elastic-Plastic Fracture,” PhD Dissertation, December 1996. Professor C.T. Sun
  • 2004
    • Subramaniyan,  Arun, “Effect of Nanoclay on Compressive Behavior of Polymeric Composites,” MS Thesis, August 2004. Professor C.T. Sun
  • 1982
    • Tan,  Tein-min, “Wave Propagation in Graphite/Epoxy Laminate Due to Impact,” PhD Dissertation, August 1982. Professor C.T. Sun
  • 2005
    • Tanner,  Travis, “Applications of Crack Tip Opening Angle for Ductile Fracture Analysis,” MS Thesis, August 2005. Professor C.T. Sun
  • 1996
    • Tao,  Jianxin, “Characterization of Matrix Cracking and Delamination in Laminated Composites,” PhD Dissertation, May 1996. Professor C.T. Sun
  • 1997
    • Thiruppukuzhi,  Srikanth, “High Strain Rate Characterization and Modeling of Polymer Composites,” PhD Dissertation, December 1997. Professor C.T. Sun
  • 2001
    • Tsai,  Jia-Lin, “Dynamic Microbuckling Model for Compressive Strength of Polymeric Composites,” PhD Dissertation, August 2001. Professor C.T. Sun
  • 1998
    • Tsai,  Jia-Lin, “Dynamic Delamination Crack Propagation in Polymeric Composites,” MS Thesis, December 1998. Professor C.T. Sun
  • 1984
    • Tsai,  Gwo-Chung, “A Study of Frequency Effects and Damage Accumulation During the Fatigue of Graphite/Epoxy and Glass/Epoxy Composite Materials,” PhD Dissertation, August 1984. Professor C.T. Sun
  • 2003
    • Turaga,  Umamaheswar, “A Study of Sandwich T-Joints and Composite Lap Joints,” PhD Dissertation, May 2003. Professor C.T. Sun
  • 1993
    • Vaidya,  Rajesh, “On Prediction of Elastic Moduli and Plastic Flow In Composite Materials Using Micromechanics,” MS Thesis, August 1993. Professor C.T. Sun
  • 1969
    • Vaidya,  P.G., “Some Aspects of the Theory of Propagation of Periodic and Transcient Sounds in Absorbent Ducts and in Rooms With an Open Window,” PhD Dissertation, March 1969. Professor C.T. Sun
  • 1981
    • Voit,  Peter, “Improving Strength in Composite Laminates Through Use of Hybrid Composites,” MS Thesis, May 1981. Professor C.T. Sun
  • 1991
    • Wang,  Cong, “Predictive Forming of Advanced Thermoplastic Composite Structures,” PhD Dissertation, December 1991. Professor C.T. Sun
  • 2001
    • Wang,  Zeping, “Modeling Micro-Inertia in Composite Materials Subjected to Dynamic Loading,” PhD Dissertation, August 2001. Professor C.T. Sun
  • 1988
    • Wang,  Rong, “Dynamics and Control of Truss Structures with Extendable Members,” PhD Dissertation, August 1988. Professor C.T. Sun
  • 1992
    • Weeks,  Craig, “Design and Characterization of Multi-Core Composite Laminates,” MS Thesis, August 1992. Professor C.T. Sun
  • 1995
    • Weeks,  Craig, “Nonlinear Rate Dependent Response of Thick-Section Composite Laminates,” PhD Dissertation, December 1995. Professor C.T. Sun
  • 1992
    • Weng,  Tung-Li, “Numerical Investigations on Fracture Behavior of Ductile Materials,” PhD Dissertation, August 1992. Professor C.T. Sun
  • 1996
    • Wu,  Peir-Shin, “Pin-Contact Failure in Composite Laminates,” PhD Dissertation, May 1996. Professor C.T. Sun
  • 1992
    • Wu,  Chung-Lin, “Low Velocity Impact of Composite Sandwich Plate,” PhD Dissertation, August 1992. Professor C.T. Sun
  • 1981
    • Yang,  Shih-Hsian, “Static and Dynamic Contact Behaviors of Composite Laminates,” PhD Dissertation, August 1981. Professor C.T. Sun
  • 1990
    • Yoon,  Kwang-Joon, “Characterization of Elastic-Plastic and Viscoplastic Behavior of AS4/PEEK Thermoplastic Composite,” PhD Dissertation, December 1990. Professor C.T. Sun
  • 1991
    • Young,  Min-Jho, “Analysis of Cracked Plates Subjected to Out-of-Plane Loadings,” PhD Dissertation, December 1991. Professor C.T. Sun
  • 1996
    • Zhang,  Xiaodong, “Adaptive Sandwich Structures,” PhD Dissertation, December 1996. Professor C.T. Sun
  • 2001
    • Zeng,  Qinggang, “A Study on Composite Adhesive Lap Joint,” PhD Dissertation, May 2001. Professor C.T. Sun
  • 2004
    • Zhang,  Haitao, “Mechanical Behavior of Nanomaterials: Modeling and Simulation,” PhD Dissertation, May 2004. Professor C.T. Sun
  • 1996
    • Zheng,  Shunfeng, “Modeling Delamination in Composite Laminates,” PhD Dissertation, May 1996. Professor C.T. Sun
  • 1984
    • Zhou,  Shu-Gong, “Failure of Qusai-Isotropic Composite Materials Under Off-Axis Loading,” MS Thesis, May 1984. Professor C.T. Sun
  • 1987
    • Zhou,  Shu-Gong, “Failure Analysis of Quasi-Isotropic Composite Laminates With Free Edges Under Off-Axis Loading,” None Dissertation, May 1987. Professor C.T. Sun
  • 1997
    • Zhu,  Changming, “Constitutive Modeling of Polymeric Composites Under Various Loading Conditions,” PhD Dissertation, December 1997. Professor C.T. Sun
  • 1996
    • Zink,  Jonathan, “Mechanical Design and Control of Flexible Joint Robotic Manipulators,” MS Thesis, December 1996. Professor C.T. Sun
  • 1997
    • Klug,  John, “Fracture and Fatigue of Bonded Composite Repairs,” PhD Dissertation, August 1997. Professor C.T. Sun
  • 2006
    • Deitemeyer,  Adam, “Three-Dimensional Characteristics of the Plastic Zone and Necking in the Crack Tip Region,” MS Thesis, May 2006. Professor C.T. Sun
    • Bing,  Qida, “Characterizing Compressive and Fracture Strengths of Fiber Reinforced Composites using Off-Axis Specimens,” PhD Dissertation, August 2006. Professor C.T. Sun
  • 2008
    • Subramaniyan,  Arun, “Development of Efficient Molecular Simulation Techniques for Engineering Applications,” PhD Dissertation, December 2008. Professor C.T. Sun
  • 2009
    • Uddin,  Mohammed, “Effect of Nanoparticle Dispersion on Mechanical Behavior of Polymer Matrix and Their Fiber Reinforced Composites,” PhD Dissertation, December 2009. Professor C.T. Sun
  • 2008
    • Adnan,  Ashfaq, “Molecular Simulations of Deformation, Failure and Fracture of Nanostructured Materials,” PhD Dissertation, August 2008. Professor C.T. Sun
  • 2005
    • Cho,  Jeong-Min, “Effect of Inclusion Size on Failure Mechanism and Mechanical Properties of Polymeric Composites Containing Micro and Nano Particles,” PhD Dissertation, August 2005. Professor C.T. Sun
  • 2010
    • Mikoshiba,  Kota, “Study of 1-D Multifunctional Acoustic Metamaterials,” MS Thesis, May 2010. Professor C.T. Sun
  • 2009
    • Dustin,  Joshua, “Strength Prediction of Bonded Joints Using the Critical CTOA Criterion,” MS Thesis, December 2009. Professor C.T. Sun/Byron Pipes
  • 1984
    • Pinella,  David, “Finite Element Analysis Cracks in Orthotropic Elastic-Plastic Materials,” MS Thesis, August 1984. Professor C.T. Sun/Doyle
  • 1990
    • Danial,  Albert, “A Parallel Lanczos Algorithm for the Solution of the General Eigenvalue Problem,” MS Thesis, August 1990. Professor C.T. Sun/Doyle
  • 1994
    • Danial,  Albert, “Inverse Solutions on Folded Plate Structures,” PhD Dissertation, August 1994. Professor C.T. Sun/Doyle
  • 1984
    • Kenaga,  Donald, “Elastic-Plastic Material Characterization and Fatigue Crack Growth in Unidirectional Metal-Matrix Composites,” MS Thesis, August 1984. Professor C.T. Sun/Doyle
  • 1985
    • Leewood,  Alan, “Numerical Studies of Problems in Anistropic Plasticity,” PhD Dissertation, December 1985. Professor C.T. Sun/Doyle
  • 2008
    • Samson,  Daniel, “Micro-Sphere Adhesive System for Quick Repair,” MS Thesis, August 2008. Professor C.T. Sun/Pipes
    • Kothari,  Rushabh, “Design and Analysis of Multifunctional Structures for Embedded Electronics in Unmanned Aerial Vehicles,” PhD Dissertation, May 2008. Professor C.T. Sun/Professor Kim
  • 2009
    • Schlueter,  Andrew, “Effects of Z-pinning on Mode I Dynamic Delamination of Woven Composite Laminate,” MS Thesis, May 2009. Professor Chen
  • 2005
    • Ge,  Yun, “Radial Inertia Effects on Dynamic Response of Extra-Soft Materials in Split Hopkinson Pressure Bar Experiments,” MS Thesis, December 2005. Professor Chen
  • 2008
    • Syn,  Chul, “Dynamic Delamination in a Glass Fiber Composite and Interfacial Fracture in a Bi-Material,” PhD Dissertation, May 2008. Professor Chen
  • 2006
    • Pan,  Yi, “The Upper Limit of Constant Strain Rate in a SHPB Experiment for a Linearly Elastic Material,” MS Thesis, May 2006. Professor Chen
    • Grupido,  Christopher, “Development of a Split Hopkinson Pressure Bar Method for Intermediate Strain Rate Experimental Testing,” MS Thesis, May 2006. Professor Chen
  • 2009
    • Skube,  Seth, “Large Strain Compression Testing of Ductile Materials at Quasi-Static and Dynamic Strain Rates,” MS Thesis, May 2009. Professor Chen
  • 2007
    • Jaron,  Jacqueline, “Static Two-Phase Solutions in a Laterally-Compressed Circular Cylinder in Zero Gravity,” MS Thesis, August 2007. Professor Collicott
  • 2008
    • Braun,  Jonathan, “Zero Gravity Two-Phase Stability Solutions of Droplets in a Bent Circular Cylinder,” MS Thesis, May 2008. Professor Collicott
  • 2006
    • Tseng,  Kuo-Tung, “Fluidic Spray Control,” PhD Dissertation, May 2006. Professor Collicott
  • 1995
    • Bayt,  Robert, “Prediction of End-Cap Effects on Equilibrium Helium Bubbles in the Gravity Probe-B Spacecraft,” MS Thesis, August 1995. Professor Collicott
  • 1999
    • Chandra,  Budi, “Experimental Investigations of the Unsteadiness in a Cavitating Slot Orifice,” MS Thesis, December 1999. Professor Collicott
  • 2003
    • Chen,  Yongkang, “A Study of Capillary Flow in a Vane-Wall Gap in Zero Gravity,” PhD Dissertation, August 2003. Professor Collicott
    • Fitzpatrick,  Shannon, “Study of Hydrogen Peroxide Low-Gravity Control for Propellant Management Devices,” MS Thesis, May 2003. Professor Collicott
  • 1997
    • Henry,  Mark, “An Experimental Investigation of a Cavitating Slot Orifice,” MS Thesis, August 1997. Professor Collicott
  • 2002
    • Hoverman,  Thomas, “Performance of a New Air-Assist/Air-Blast Atomizer for Large Liquid Mass Flows,” MS Thesis, May 2002. Professor Collicott
    • Krautheim,  Michael, “Downstream Measurements of a High Reynolds Number Horseshoe Vortex,” MS Thesis, May 2002. Professor Collicott
  • 1999
    • Li,  Haiyun, “An Experimental Investigation of High Pressure Cavitating Atomizers,” PhD Dissertation, December 1999. Professor Collicott
  • 2000
    • Lindqvist,  Jens, “Aerodynamic Losses in a Strut and Duct Flow with Lift,” MS Thesis, May 2000. Professor Collicott
  • 1994
    • McGuire,  Joseph, “Fluid Dyamics Perturbations Using Laser Induced Breakdown,” MS Thesis, August 1994. Professor Collicott
  • 2001
    • Radocaj,  Daniel, “Experimental Characterization of a Simple Gas Turbine Engine Sump Geometry,” MS Thesis, December 2001. Professor Collicott
  • 2002
    • Salyer,  Terry, “Laser Differential Interferometry for Supersonic Blunt Body Receptivity Experiments,” PhD Dissertation, May 2002. Professor Collicott
  • 1999
    • Sanchez,  Paul, “Rigorous Investigation of Cavitation in a 2-D Slot Orifice,” MS Thesis, May 1999. Professor Collicott
  • 1994
    • Salyer,  Terry, “Quantitative Noise Reduction Measurements of a Multiple-Source Schlieren System,” MS Thesis, May 1994. Professor Collicott
  • 2008
    • Chiu,  Jimmy, “A Simulink Model for Vehicle Rollover Prediction and Prevention,” MS Thesis, August 2008. Professor Corless
  • 2002
    • Acikmese,  Ahmet, “Stabilization, Observation, Tracking and Disturbance Rejection for Uncertain/Nonlinear and Time-Varying Systems,” PhD Dissertation, December 2002. Professor Corless
  • 1997
    • Brockman,  Mark, “Quadratic Boundedness of Uncertain Nonlinear Dynamic Systems,” PhD Dissertation, December 1997. Professor Corless
  • 1992
    • Da,  Dong, “Robust Control of Uncertain Aerospace and Mechanical Systems with Unmodelled Flexibilities: A Singular Perturbation Approach,” PhD Dissertation, May 1992. Professor Corless
  • 2004
    • D'Alto,  Luis, “Incremental Quadratic Stability,” MS Thesis, August 2004. Professor Corless
  • 1998
    • Kim,  Jinsuck, “Underactuated Control of Two-Link Manipulator,” MS Thesis, August 1998. Professor Corless
  • 2000
    • Pancake,  Trent, “Analysis and Control of Uncertain/Nonlinear Systems in the Presence of Bounded Disturbance Inputs,” PhD Dissertation, December 2000. Professor Corless
  • 1999
    • Sultan,  Cornel, “Modeling, Design, and Control of Tensegrity Structures with Applications,” PhD Dissertation, May 1999. Professor Corless
  • 1995
    • Zenieh,  Salah, “Nonlinear Control of Mechanical and Aerospace Systems with Flexible Elements: Application to Robotics,” PhD Dissertation, August 1995. Professor Corless
  • 1992
    • Zhu,  Guoming, “L2 and L Multiobjective Control for Linear Systems,” PhD Dissertation, May 1992. Professor Corless
  • 2008
    • Moonjelly,  Paul, “Design and Implementation of a Purely Electromagnetic Attitude Control System for a Nano-Satellite,” MS Thesis, December 2008. Professor Corless/Professor Filmer
  • 2010
    • Lenz,  Annelise, “Simple Uncertainty Propagation for Early Design Phase Aircraft Sizing,” MS Thesis, August 2010. Professor Crossley
  • 2000
    • Cook,  Andrea, “Genetic Algorithm Approaches to Optimizing the Location and Number of Smart Actuators on an Aircraft Wing,” MS Thesis, December 2000. Professor Crossley
  • 2001
    • Fanjoy,  David, “Aerodynamic Shape and Structural Topology Design of Helicopter Rotor Cross-Sections Using a Genetic Algorithm,” PhD Dissertation, August 2001. Professor Crossley
  • 1998
    • Fanjoy,  David, “Using the Genetic Algorithm for Multidisciplinary Helicopter Rotor Airfoil Design: Shape and Topology Approaches,” MS Thesis, May 1998. Professor Crossley
  • 2004
    • Hassan,  Rania, “Genetic Algorithm Approaches for Conceptual Design of Spacecraft Systems Including Multi-Objective Optimization and Design Under Uncertainty,” PhD Dissertation, May 2004. Professor Crossley
  • 2003
    • Koenigs,  Michael, “Numerical Methods for Modeling Gas Turbine Combustors,” MS Thesis, May 2003. Professor Crossley
  • 2005
    • Lamberson, Jr.,  Steven, “Composite Laminate Optimization Techniques Applied to Load-Bearing Circuit Board Design,” MS Thesis, August 2005. Professor Crossley
    • Mane,  Muharrem, “Allocation of Variable Resources and Aircraft Design Using Multidisciplinary Optimization for System of Systems,” MS Thesis, August 2005. Professor Crossley
  • 2002
    • Martin,  Eric, “Multiobjective Optimization Using Genetic Algorithms With Applications For Aircraft Design,” MS Thesis, August 2002. Professor Crossley
  • 2005
    • Nankani,  Kamlesh, “Optimization Approaches for Morphing Airfoils Using Drag and Strain Energy as Objectives,” MS Thesis, August 2005. Professor Crossley
    • Nehrbass,  Johnathan, “Drag Benefits of Formation Flight and Morphing on Transatlantic Point-to-Point Commercial Air Service,” MS Thesis, August 2005. Professor Crossley
  • 1998
    • Ross,  Tamaira, “Designing for Minimum Cost: A Method to Assess Commercial Aircraft Technologies,” MS Thesis, May 1998. Professor Crossley
  • 2003
    • Roth,  Brian, “Aircraft Sizing with Morphing as an Independent Variable: Motivation, Strategies and Investigations,” MS Thesis, May 2003. Professor Crossley
  • 2005
    • Skillen,  Michael, “Developing Response Surface Based Wing Weight Equations for Conceptual Morphing Aircraft Sizing,” MS Thesis, December 2005. Professor Crossley
  • 2001
    • Smith, III,  Crawford, “Response Surface Methods for Optimization,” PhD Dissertation, May 2001. Professor Crossley
  • 1999
    • Williams,  Edwin, “Satellite Constellation Design Methods,” MS Thesis, December 1999. Professor Crossley
  • 2008
    • Mane,  Muharrem, “Concurrent Aircraft Design and Trip Assignment Under Uncertainty as a System of Systems Problem,” PhD Dissertation, December 2008. Professor Crossley
  • 2007
    • Nusawardhana,  A., “Dynamic Programming Methods for Concurrent Design and Dynamic Allocation of Vehicles Embedded in a System-of-Systems,” PhD Dissertation, August 2007. Professor Crossley
  • 2009
    • Tyagi,  Ankit, “Investigating Long-Range Aircraft Staging for Environmental, Economic, and Travel Time Impacts,” MS Thesis, December 2009. Professor Crossley
    • Dikshit,  Prakash, “Development of an Airport Noise Model Suitable for Fleet-level Studies,” MS Thesis, August 2009. Professor Crossley
  • 2010
    • Haderlie,  Jacob, “Multiobjective Optimization of an Axisymmetric Supersonic-Inlet Bypass-Duct Splitter via Surrogate Modeling,” MS Thesis, May 2010. Professor Crossley
    • Tetzloff,  Isaac, “An Allocation Approach to Investigate New Aircraft Concepts and Technologies on Fleet-Level Metrics,” MS Thesis, May 2010. Professor Crossley
  • 1998
    • Jones,  Brian R., “Aerodynamic and Aeroacoustic Optimization of Rotor Airfoils via Parallel Genetic Algorithm,” MS Thesis, December 1998. Professor Crossley/Lyrintzis
  • 2010
    • Noth,  Kyle, “An Investigation of Very Large Aircraft Impacts on the Air Transportation System with Motivations for Future Aircraft Design,” MS Thesis, May 2010. Professor DeLaurentis
    • Joshi,  Aditya, “An Integrated Framework to Study the Interaction Between On-Demand Air Service and Existing Regional Transportation System,” MS Thesis, August 2010. Professor DeLaurentis
  • 2007
    • Sindiy,  Oleg, “A System-of-Systems Framework for Improved Decision Support in Space Exploration,” MS Thesis, May 2007. Professor DeLaurentis
  • 2008
    • Cashbaugh,  Jasmine, “An Agent-Based Modeling Approach to a Study of the Effects of Network Logic and a New Aircraft Design on an Air Force Supply Network Located in the Middle East,” MS Thesis, May 2008. Professor DeLaurentis
  • 2002
    • Kang,  Un-Taik, “Inverse Method for Static Problems using Optical Data,” PhD Dissertation, December 2002. Professor Doyle
  • 1999
    • Adams, Jr.,  Robert, “Force Identification on General Structures,” MS Thesis, December 1999. Professor Doyle
  • 1995
    • Bilodeau,  Brian, “Application of the Spectral Element Method to Interior Noise Problems,” MS Thesis, December 1995. Professor Doyle
  • 2002
    • Choi,  Seung-Woo, “Impact Failure Mechanisms of Layered Structures,” PhD Dissertation, August 2002. Professor Doyle
  • 2004
    • Cho,  Sung, “Algorithms for Identification of the Nonlinear Behavior of Structures,” PhD Dissertation, May 2004. Professor Doyle
  • 2000
    • Cho,  Sung, “A Sub-Domain Inverse Method for Dynamic Crack Propagation Problems,” MS Thesis, December 2000. Professor Doyle
  • 2005
    • Djibo,  Louise-Olivia, “Natural Conformation: A Study of the Shape of Structures in Equilibrium,” MS Thesis, December 2005. Professor Doyle
  • 1991
    • Heinstein,  Martin, “Simulation of Shear Band Phenomenon in Metal Forming and Cutting,” PhD Dissertation, August 1991. Professor Doyle
  • 1987
    • Heinstein,  Martin, “Adaptive 2D Finite Element Simulation of Metal Forming Processes,” MS Thesis, December 1987. Professor Doyle
  • 1984
    • Kamle,  Sudhir, “Reflection and Transmission of Flexural Waves at Discontinuities,” PhD Dissertation, August 1984. Professor Doyle
  • 1990
    • Martin,  Michael, “Power Flow Analysis of Wave Propagation in Trusses,” MS Thesis, May 1990. Professor Doyle
  • 1994
    • Martin,  Michael, “Inverse Problems in Structural Dynamics,” PhD Dissertation, August 1994. Professor Doyle
  • 2004
    • Quintana,  Juan, “A Global Search Method for Damage Detection in General Structures,” MS Thesis, December 2004. Professor Doyle
  • 1989
    • Rizzi,  Stephen, “A Spectral Analysis Approach to Wave Propagation in Layered Solids,” PhD Dissertation, August 1989. Professor Doyle
  • 1985
    • Rizzi,  Stephen, “Fatigue Crack Growth in Boron-Aluminum Metal Matrix Composites,” MS Thesis, December 1985. Professor Doyle
  • 1992
    • Srinivasan,  Gopalakrishnan, “Spectral Analysis of Wave Propagation in Connected Waveguides,” PhD Dissertation, December 1992. Professor Doyle
  • 1979
    • Takezaki,  Juro, “The Photoelastic Analysis of Mixed-Mode Fracture Mechanics,” MS Thesis, December 1979. Professor Doyle
  • 1963
    • Jordan,  Neal, “On the Static Nonlinear Theory of Electromagnetic Thermoelastic Solids,” PhD Dissertation, August 1963. Professor Eringen
  • 1961
    • Dunkin,  John, “On the Propagation of Waves in an Electromagnetic Elastic Solid,” PhD Dissertation, June 1961. Professor Eringen
  • 2000
    • Zavattieri,  Pablo, “Computational Modeling for Bridging Size Scales in the Failure of Solids,” PhD Dissertation, December 2000. Professor Espinosa
  • 1999
    • Arrieta,  Hernan, “Dynamic Testing of Advanced Materials at High and Low Temperatures,” MS Thesis, December 1999. Professor Espinosa
  • 1996
    • Emore,  Gordon, “Computational Modeling of Geometric and Material Nonlinearities with Applications to Impact Dynamics,” MS Thesis, December 1996. Professor Espinosa
  • 1998
    • Lu,  Hung-Cheng, “Ballistic Penetration of GRP Composites: Identification of Failure Mechanisms and Modeling,” PhD Dissertation, December 1998. Professor Espinosa
    • Patanella,  Alejandro, “A Novel Experimental Technique for Dynamic Friction Studies,” MS Thesis, December 1998. Professor Espinosa
  • 1997
    • Xu,  Yueping, “Failure Mechanisms in Glasses and Glass Ceramics,” MS Thesis, May 1997. Professor Espinosa
  • 2008
    • Gean,  Matthew, “Elevated Temperature Fretting Fatigue of Nickel Based Alloys,” PhD Dissertation, August 2008. Professor Farris
  • 2007
    • Kumari,  Shyama, “Contact Geometry, Friction, and Load Variations in Fretting Fatigue of Ti-6Al-4V,” PhD Dissertation, May 2007. Professor Farris
  • 2006
    • Mseis,  George, “Mechanical Characterization of an Electrodeposited Nanocrystalline Copper,” MS Thesis, May 2006. Professor Farris
  • 2000
    • Bartha,  Bence, “Performance of Hard Turned Surfaces,” MS Thesis, May 2000. Professor Farris
  • 2005
    • Bartha,  Bence, “Modeling of Geometry Effects in Fretting Fatigue,” PhD Dissertation, May 2005. Professor Farris
  • 1992
    • Blair,  Kim, “Nonlinear Dynamic Response of Shallow Arches to Harmonic Forcing,” PhD Dissertation, May 1992. Professor Farris
  • 2001
    • Chen,  Yun, “Analysis of Indentation Cracking in Brittle Solids,” PhD Dissertation, August 2001. Professor Farris
  • 1990
    • Chen,  Yen-Meng, “Pinch-off of Borosilicate Glass and Aluminum Oxide Rods Using Micro-Indentation Cracking,” MS Thesis, December 1990. Professor Farris
  • 1993
    • Chen,  Shi-Yew, “Experimental and Boundary Element Analysis of Hertzian Cone Cracking,” PhD Dissertation, December 1993. Professor Farris
  • 1989
    • Chen,  Shi-Yew, “Applications of Three Dimensional Fracture Mechanics to Micro-Indentation Testing and Scribing,” MS Thesis, August 1989. Professor Farris
  • 1998
    • Chang,  Shih-Hsiang, “Basic Study of Superfinishing of Hardened Steels,” PhD Dissertation, December 1998. Professor Farris
  • 1995
    • Dunlap,  Tony, “Technique for Experimental Grinding Ratio Measurement,” MS Thesis, December 1995. Professor Farris
  • 1996
    • Ganapathy,  Harish, “Modeling of Plate/Fastener Contact: Application to Fretting Fatigue,” MS Thesis, August 1996. Professor Farris
  • 2000
    • Ganapathy,  Harish, “Coupled Thermoelastic Analysis of Fretting Contacts,” PhD Dissertation, December 2000. Professor Farris
  • 2005
    • Gao,  Guofeng, “Fretting Induced Plasticity in Blade/Disk Contacts,” PhD Dissertation, August 2005. Professor Farris
  • 2004
    • Gean,  Matthew, “Finite Element Analysis of the Mechanics of Blade Disk Contacts,” MS Thesis, May 2004. Professor Farris
  • 2006
    • Hanna,  Ihab, “Thermal Modeling of Grinding for Process Optimization and Durability Improvements,” PhD Dissertation, May 2006. Professor Farris
  • 2000
    • Haradanahalli,  Murthy, “Modeling of Fretting Fatigue and Life Prediction in Blade/Disk Contacts,” MS Thesis, December 2000. Professor Farris
  • 2004
    • Haradanahalli,  Murthy, “Fretting Fatigue of Anisotropic Materials at Elevated Temperatures,” PhD Dissertation, August 2004. Professor Farris
  • 1992
    • Hill,  Lisa, “A Spectral Boundary Element Method for Transient Heat Conduction,” MS Thesis, August 1992. Professor Farris
  • 1997
    • Hill,  Lisa, “Three-Dimensional Piezoelectric Boundary Elements,” PhD Dissertation, August 1997. Professor Farris
  • 1990
    • Hucker,  Scott, “A Boundary Element Approach to Thermoelastic Crack Problems,” MS Thesis, December 1990. Professor Farris
  • 2001
    • Jin,  Long, “Simulation of Quenching and Tempering of Steels,” PhD Dissertation, August 2001. Professor Farris
  • 1997
    • Ju,  Yongging, “Thermal Aspects of Grinding for Surface Integrity,” PhD Dissertation, May 1997. Professor Farris
  • 1998
    • Kompella,  Sridhar, “Techniques for Rapid Characterization of Grinding Wheel-Workpiece Combinations,” MS Thesis, August 1998. Professor Farris
  • 2004
    • Kumari,  Shyama, “A Statistical Account of the Effect of Arbitrary Profile Variation on Fretting Fatigue Behavior of the Contact Surface of a Dovetail Joint,” MS Thesis, August 2004. Professor Farris
  • 1992
    • Liu,  Minzhu, “Three Dimensional Boundary Element Analysis of Contact and Fracture Problems,” PhD Dissertation, August 1992. Professor Farris
  • 1994
    • Mann,  James, “CBN Grinding of M2 Tool Steel and the Strength of Ground Surfaces,” MS Thesis, May 1994. Professor Farris
  • 2001
    • Matlik,  John, “Motivation, Design, and Calibration of a High Frequency Fretting Fatigue Load Frame,” MS Thesis, May 2001. Professor Farris
  • 2004
    • Matlik,  John, “High-Temperature, High-Frequency Fretting Fatigue of a Single Crystal Nickel Alloy,” PhD Dissertation, December 2004. Professor Farris
  • 1995
    • McVeigh,  Pamela, “Finite Element Analysis of Fretting Fatigue Stresses,” MS Thesis, December 1995. Professor Farris
  • 2001
    • Pérez-Ruberté,  Eddie, “Elasto-Plastic Finite Element Analysis of Contacts with Applications to Fretting Fatigue,” MS Thesis, August 2001. Professor Farris
  • 1994
    • Sack,  Elizabeth, “Evaluation of Finite Element Analysis of Piezoelectric Materials with Holes and Cracks,” MS Thesis, May 1994. Professor Farris
  • 1995
    • Szolwinski,  Matthew, “Mechanics of Fretting Fatigue Crack Formation,” MS Thesis, August 1995. Professor Farris
  • 1998
    • Szolwinski,  Matthew, “The Mechanics and Tribology of Fretting Fatigue with Application to Riveted Lap Joints,” PhD Dissertation, August 1998. Professor Farris
  • 1995
    • Varney,  Bruce, “Mechanics of Roller Straightening,” MS Thesis, April 1995. Professor Farris
  • 2009
    • Robinson,  Lucas, “Fretting Fatigue of AISI 9310 Case-hardened Steel,” MS Thesis, December 2009. Professor Farris
  • 2008
    • Tate,  Nathan, “Experimental Determination of Mode I Stress Intensity Factors for Elevated Temperature Fretting Fatigue of a Nickel-Based Superalloy,” MS Thesis, December 2008. Professor Farris
  • 2009
    • Sundaram,  Narayan, “Double and Multiple Contacts of Similar Elastic Materials,” PhD Dissertation, May 2009. Professor Farris
  • 2008
    • Bhosri,  Wisuwat, “Geometric Approach to Prediction and Periodic Systems,” PhD Dissertation, December 2008. Professor Frazho
  • 1990
    • Augenstein,  David, “A Recursive Solution to the Suboptimal Block Nehari Problem,” PhD Dissertation, December 1990. Professor Frazho
  • 1994
    • Kherat,  Samir, “Some Aspects of Gramian Assignment and Interpolation in Control Systems,” PhD Dissertation, May 1994. Professor Frazho
  • 1989
    • Le,  Dzu, “A Parametric Pole-Matching Approach to Relative Stability and System Integrity,” PhD Dissertation, August 1989. Professor Frazho
  • 1991
    • Smith,  Monty, “Structural Optimization Using Passive and Active Control,” MS Thesis, August 1991. Professor Frazho
  • 1997
    • Smith,  Monty, “Multiple Objective Control System Synthesis Via Lifting Techniques,” PhD Dissertation, December 1997. Professor Frazho
  • 2004
    • Yagci,  Baris, “Sinusoid Estimation in Additive Noise and Applications in Experimental Vibration Analysis,” PhD Dissertation, May 2004. Professor Frazho
  • 2005
    • Eichel,  Brenda, “Model-Based Compression of GPS Ephemeris,” MS Thesis, December 2005. Professor Garrison
  • 2006
    • Ventre,  Brian, “Open-loop Tracking of an Occulting GNSS Signal,” MS Thesis, May 2006. Professor Garrison
  • 2004
    • Liang,  Liang, “Numerical Simulation of GPS Code Tracking Loops,” MS Thesis, December 2004. Professor Garrison
  • 2005
    • Smajlovic,  Dino, “Obtaining Ocean Roughness Statistics from Reflected GPS Signals,” MS Thesis, December 2005. Professor Garrison
    • You,  Huai-Tzu, “Stochastic Model for Ocean Surface Reflected GPS Signals and Satellite Remote Sensing Applications,” PhD Dissertation, May 2005. Professor Garrison
  • 2006
    • Heckler,  Gregory, “Implementation and Testing of an Unaided Method for the Acquisition of Weak GPS C/A Code Signals,” MS Thesis, December 2006. Professor Garrison
  • 1981
    • Norville,  H. Scott, “Dynamic Safety Analysis,” PhD Dissertation, May 1981. Professor Gaunt (Civil)
  • 1970
    • Sharpe,  David, “An Investigation of the Fitting of Mixed Autoregressive-Moving Average Models to Second Order Stationary Time Series Data,” PhD Dissertation, August 1970. Professor Gersch
  • 1982
    • Deur,  John, “A Study of Non-Steady Combustion of Heterogeneous Propellants,” MS Thesis, December 1982. Professor Glick
  • 2007
    • Grinham,  Matthew, “Parametric Study of Damager Containment Features in Integral Structures for Optimum Crack Retardation,” MS Thesis, May 2007. Professor Grandt
    • Kloeden,  Richard, “Modeling Crack Propagation in Modern Stiffened Fuselage Structures,” MS Thesis, December 2007. Professor Grandt
  • 1994
    • Arendt,  Cory, “An Efficient Plate Finite Element Model for Analysis of Cracked Metallic Plates Repaired with Composite Patches,” MS Thesis, August 1994. Professor Grandt
  • 1990
    • Blatt,  Paul, “Evaluation of Fatigue Crack Initiation Behavior of an Experimental Ternary Aluminum-Lithium Alloy,” MS Thesis, May 1990. Professor Grandt
  • 1993
    • Blatt,  Paul, “Fatigue Crack Growth Behavior of a Titanium Matrix Composite Under Thermomechanical Loading,” PhD Dissertation, December 1993. Professor Grandt
    • Buhler,  Kimberley, “A Study of Fatigue Crack Growth of Panels Containing Multiple Site Damage,” MS Thesis, December 1993. Professor Grandt
  • 2004
    • Child,  David, “Experimental Validation of Mode I Stress Intensity Factors for the Single-Cracked Pin-Loaded Lug,” MS Thesis, May 2004. Professor Grandt
    • Chiew,  Lee, “Stress-Intensity Factors Solutions for Countersunk Holes Under Pin-Loading,” MS Thesis, August 2004. Professor Grandt
  • 1989
    • Dawicke,  David, “Three-Dimensional Fatigue Crack Closure of Metals,” PhD Dissertation, August 1989. Professor Grandt
  • 1993
    • Doerfler,  Mark, “Determination of Stress Intensity Factors for Cracks at Deep Notches,” MS Thesis, December 1993. Professor Grandt
  • 1989
    • Drury,  Steven, “A Study of Probabilistic Durability Analysis,” MS Thesis, December 1989. Professor Grandt
  • 1982
    • Dumanis-Modan,  Alon, “Evaluation of the Crack Gage as an Advanced Individual Aircraft Tracking Concept,” PhD Dissertation, December 1982. Professor Grandt
  • 1993
    • Forsyth,  Eric, “Initiation, Growth, and Coalescence of Small Fatigue Cracks at Notches,” MS Thesis, May 1993. Professor Grandt
  • 2005
    • Garcia,  Daniel, “Crack Propagation Analysis of Surface Enhanced Titanium Alloys with Fretting Induced Damage,” PhD Dissertation, May 2005. Professor Grandt
  • 2002
    • Garcia,  Daniel, “Fractographic Analysis of Fatigue Failures with Fretting Induced Damage,” MS Thesis, May 2002. Professor Grandt
  • 1997
    • Gates,  Matthew, “A Crack Gage Approach to Monitoring Flaw Growth Potential in Aircraft,” MS Thesis, May 1997. Professor Grandt
    • Golden,  Patrick, “A Comparison of Fatigue Crack Initiation at Holes in 2024-T3 and 2524-T3 Aluminum Alloys,” MS Thesis, December 1997. Professor Grandt
  • 2001
    • Golden,  Patrick, “High Cycle Fatigue of Fretting Induced Cracks,” PhD Dissertation, December 2001. Professor Grandt
  • 1998
    • Green,  Stephen, “Fatigue Crack Initiation, Growth and Coalescence at Notches in High Strength Steel,” MS Thesis, December 1998. Professor Grandt
  • 2000
    • Hahn,  Darren, “Development of Mechanically Fastened Joint Specimens to Rank Aluminum Alloy Fatigue Performance,” MS Thesis, May 2000. Professor Grandt
  • 1982
    • Harter,  James, “Fatigue Crack Growth of Embedded Flaws in Plate and Lug Type Fastener Holes,” MS Thesis, May 1982. Professor Grandt
  • 1994
    • Heinimann,  Markus, “Numerical Determination of Stress Intensity Factors for Cracks at Deep Notches,” MS Thesis, May 1994. Professor Grandt
  • 1989
    • Henkener,  Julie, “The Fatigue Crack Growth Behavior of an Experimental Tenary AL-2.6LI-0.09ZR Alloy,” MS Thesis, December 1989. Professor Grandt
  • 1997
    • Heinimann,  Markus, “Analysis of Stiffened Panels with Multiple Site Damage,” PhD Dissertation, May 1997. Professor Grandt
  • 2002
    • Lamb,  Gregory, “Fatigue Performance of an Advanced Fastener Hole Cold Working Method,” MS Thesis, August 2002. Professor Grandt
  • 2005
    • Main,  Benjamin, “Evaluation of Continuing Damage From a Cracked Hole with a Failed Ligament,” MS Thesis, May 2005. Professor Grandt
  • 1985
    • McComb,  Thomas, “Interaction and Coalescence of Fatigue Cracks at a Hole in a Plate,” MS Thesis, May 1985. Professor Grandt
  • 1990
    • Morris,  Scott, “The Characterization of Damage Due to Out-of-Plane Loading in the AS4/PEEK Composite,” MS Thesis, December 1990. Professor Grandt
  • 1994
    • Morris,  Scott, “The Characterization and Modeling of Advanced Thermoplastic Composite Materials Forming Processes,” PhD Dissertation, December 1994. Professor Grandt
  • 2006
    • Moyle,  Nicholas, “Experimental Determination of the Mode I Stress Intensity Factor for a Corner Cracked Lug using a Marker Banding Technique,” MS Thesis, May 2006. Professor Grandt
  • 1993
    • Moukawsher,  Elias, “Fatigue Life and Residual Strength of Panels with Multiple Site Damage,” MS Thesis, May 1993. Professor Grandt
  • 2003
    • Park,  Chul, “Durability of Countersunk Fastener Holes,” PhD Dissertation, December 2003. Professor Grandt
  • 1986
    • Perez,  Rigoberto, “Stress Intensity Factors for Fatigue Cracks at Holes Under Cyclic Stress Gradients,” PhD Dissertation, May 1986. Professor Grandt
  • 1983
    • Perez,  Rigoberto, “Initiation, Growth and Coalescence of Fatigue Cracks,” MS Thesis, August 1983. Professor Grandt
  • 1987
    • Pope,  John, “A Three-Dimensional Model of Fatigue Crack Growth Incorporating Crack Closure,” PhD Dissertation, December 1987. Professor Grandt
    • Ray,  Suvendoo, “A Three-Dimensional Investigation of Steady State Fatigue Crack Closure Behavior for Through-Thickness and Part-Through Flaws,” PhD Dissertation, August 1987. Professor Grandt
  • 1984
    • Ray,  Suvendoo, “Three Dimensional Crack Closure Measurements in Polycarbonate,” MS Thesis, December 1984. Professor Grandt
  • 1996
    • Rifani,  Andreas, “Investigation of 3-D Fatigue Crack Growth Behavior in a Double-T Cross Section,” MS Thesis, May 1996. Professor Grandt
  • 2003
    • Rodrian,  Jeffrey, “Incorporating Real World Engineering Experiences into Aeronautical and Astronautical Engineering Education,” MS Thesis, May 2003. Professor Grandt
  • 1991
    • Saunder,  Terrence, “Fatigue Crack Growth From Coldworked Eccentrically Located Holes In 7075-T651 Aluminum,” MS Thesis, December 1991. Professor Grandt
    • Scheumann,  Troy, “A Numerical and Experimental Investigation of the Effects of Notches on Fatigue Behavior,” MS Thesis, August 1991. Professor Grandt
  • 1995
    • Scheuring,  Jason, “An Evaluation of Aging Aircraft Materials,” MS Thesis, August 1995. Professor Grandt
  • 1997
    • Sexton,  Darren, “A Comparison of the Fatigue Damage Resistance and Residual Strength of 2024-T3 and 2424-T3 Panels Containing Multiple Site Damage,” MS Thesis, August 1997. Professor Grandt
  • 2005
    • Suh,  Jungjun, “Analysis of Fatigue Crack Growth from Countersunk Fastener Hole,” PhD Dissertation, August 2005. Professor Grandt
  • 1983
    • Tritsch,  Douglas, “Prediction of Fatigue Crack Lives and Shapes,” MS Thesis, August 1983. Professor Grandt
  • 1988
    • Troha,  William, “Influence of Fatigue Crack Closure on the Growth Rate of Surface Flaws,” PhD Dissertation, May 1988. Professor Grandt
  • 1987
    • Walker,  Kevin, “The Effect on Fatigue Crack Growth Under Spectrum Loading of An Imposed Placard "G" Limit,” MS Thesis, December 1987. Professor Grandt
  • 1998
    • Wang,  Hsing-Ling, “Evaluation of Multiple Site Damage in Lap Joint Specimens,” PhD Dissertation, December 1998. Professor Grandt
  • 1994
    • Zezula,  Chad, “The Influence of Initial Inhomogeneities on Notch Fatigue of 7050-T7451 Aluminum Plate,” MS Thesis, May 1994. Professor Grandt
  • 2009
    • Needham,  Galen, “Small Crack Initiation and Formation - An Investigation into Equivalent Initial Flaw Size and Parallel Offset Surface Crack Interactions,” MS Thesis, December 2009. Professor Grandt
  • 2007
    • Wilson,  Gregory, “Improving Fatigue Crack Growth Performance of Structural,” MS Thesis, August 2007. Professor Grandt
  • 1981
    • Davis,  Donald, “Application of the Method of Weighted Residuals to the Boundary Layer Momentum & Turbulent Stress Transport Equations,” PhD Dissertation, May 1981. Professor Gustafson
  • 2010
    • Ismailov,  Maksud, “Modeling of Classical Swirl Injector Dynamics,” PhD Dissertation, August 2010. Professor Heister
  • 2006
    • Canino,  James, “Numerical Analysis of Coaxial Swirl Injectors,” PhD Dissertation, August 2006. Professor Heister
  • 2010
    • Slaby,  Justin, “Experimental Investigation of Erosive Burning in Solid Propellant Motors,” MS Thesis, May 2010. Professor Heister
  • 2003
    • Armstrong,  Kimberly, “Fundamentals of the Mass Ejection Propulsion System for Mobile Landmines,” MS Thesis, December 2003. Professor Heister
  • 2002
    • Austin, Jr.,  Benjamin, “Characterization of Pintle Engine Performance for Nontoxic Hypergolic Bipropellants,” MS Thesis, August 2002. Professor Heister
  • 2001
    • Beutien,  Trisha, “A Ceramic-Manganese Oxide System for the Decomposition of High Concentration Hydrogen Peroxide,” MS Thesis, August 2001. Professor Heister
  • 2002
    • Brodrecht,  David, “Parametric Studies of an Aluminum-Hydrogen Peroxide Semi-Fuel Cell,” MS Thesis, May 2002. Professor Heister
    • Bulathsinghala,  Ivor, “Trajectory Control Through Thrust Vector Rotation,” MS Thesis, May 2002. Professor Heister
  • 1999
    • Bunnell,  Robert, “Unsteady, Viscous, Cavitating Simulation of Injector Internal Flows,” PhD Dissertation, August 1999. Professor Heister
  • 2002
    • Canino,  James, “Characterization of the Turbulent Windage in an Annulus and Its Incorporation into Two Sump Design Codes,” MS Thesis, December 2002. Professor Heister
  • 1996
    • Caravella, Jr.,  Joseph, “Experimental Investigation of Combustion in a Radial Flow Hybrid Rocket Engine,” MS Thesis, August 1996. Professor Heister
  • 2004
    • Corpening,  Jeremy, “Experiments on Combustion of Advanced Hybrid Rocket Fuels using Hydrogen Peroxide Oxidizer,” MS Thesis, May 2004. Professor Heister
  • 1995
    • Chen,  Yongliang, “Numerical Approaches for Hydrodynamic Cavitating Flows,” PhD Dissertation, August 1995. Professor Heister
  • 1999
    • Chao,  Chien-Chi, “Boundary Element Modeling of 2-D and 3-D Atomization Processes,” PhD Dissertation, May 1999. Professor Heister
  • 2004
    • Edwards,  Jonathan, “Impulse Measurements of Momentum Exchange Propulsion for Mobility Applications,” MS Thesis, March 2004. Professor Heister
  • 1999
    • Funk,  John, “Ignition Delay Analysis of Non-Toxic Hypergolic Miscible Fuels,” MS Thesis, August 1999. Professor Heister
  • 2003
    • Funk,  John, “Effects of Impingement and Shear Upon the Ignition of Hypergolic Rocket Bipropellants,” PhD Dissertation, December 2003. Professor Heister
  • 1993
    • Hejl,  Robert, “Solid Rocket Motor Grain Burnback Analysis Using Adaptive Grid Techniques,” MS Thesis, August 1993. Professor Heister
  • 1996
    • Hilbing,  James, “Nonlinear Modeling of Atomization Processes,” PhD Dissertation, August 1996. Professor Heister
  • 2004
    • Hrach,  Michael, “Investigation of Oil Drainage from the Bearing Chamber of a Gas Turbine Engine,” MS Thesis, December 2004. Professor Heister
    • Kibbey,  Timothy, “Impinging Jets for Application in High-Mach Aircraft Thermal Management,” MS Thesis, December 2004. Professor Heister
  • 2002
    • Kim,  Byoung-Do, “Study of Hydrodynamic Instability of Shear Coaxial Flow in a Recessed Region,” PhD Dissertation, December 2002. Professor Heister
  • 2003
    • Kwon,  T.J., “Simulating Collisions of Droplets with Walls and Films Using a Level Set Method,” PhD Dissertation, May 2003. Professor Heister
  • 1999
    • Mailhe,  Laurie, “Design of a High Thrust/Low Thrust Orbital Transfer Vehicle Considering Van Allen Radiation Belts,” MS Thesis, August 1999. Professor Heister
  • 2003
    • Matsutomi,  Yu, “Impulse Measurement and Modeling of Cyclic Pulse Detonation Engines,” MS Thesis, December 2003. Professor Heister
  • 2001
    • Miller,  Daniel, “Electrocatalysis in Hydrogen Peroxide Fuel Cells,” MS Thesis, December 2001. Professor Heister
  • 1995
    • Moses,  Michael, “Visualization of Liquid Jet Breakup and Droplet Formation,” MS Thesis, May 1995. Professor Heister
  • 1996
    • Murray,  Ian, “Modeling Acoustically Induced Oscillations of Droplets,” MS Thesis, August 1996. Professor Heister
  • 2004
    • Niemczura,  Jerry, “Evaluation of Positive Displacement Pump Types for Small Scale, Scroll driven, Propellant Feed Systems,” MS Thesis, May 2004. Professor Heister
  • 2005
    • Park,  Hongbok, “Flow Characteristics of Viscous High-Speed Jets in Axial/Swirl Injectors,” PhD Dissertation, August 2005. Professor Heister
  • 2000
    • Pham,  Tuan, “A Computational Tool for Spray Modeling Using Lagrangian Droplet Tracking in a Homogeneous Flow Model,” PhD Dissertation, August 2000. Professor Heister
  • 2002
    • Remson,  Andrew, “The Non-Catalytic Ignition of High-Performance Monopropellants,” MS Thesis, August 2002. Professor Heister
  • 2004
    • Rubel,  Ken, “Thermal Decomposition of an Advanced Monopropellant,” MS Thesis, December 2004. Professor Heister
  • 1996
    • Rump,  Kurt, “Modeling the Effect of Unsteady Chamber Conditions on Atomization Processes,” MS Thesis, December 1996. Professor Heister
  • 1995
    • Rutz,  Mark, “Effect of Transverse Acoustic Oscillation on the Behavior of a Liquid Jet,” MS Thesis, December 1995. Professor Heister
  • 2001
    • Shimo,  Masayoshi, “Modeling of Oil Film Behavior on a Seal Runner and a Sump Wall,” MS Thesis, December 2001. Professor Heister
  • 1994
    • Spangler,  Christopher, “Nonlinear Modeling of Jet Atomization in the Wind-Induced Regime,” MS Thesis, August 1994. Professor Heister
  • 1998
    • VandenBoom,  Michael, “A Thermostructural Analysis of a Lined Composite Rocket Nozzle,” MS Thesis, December 1998. Professor Heister
  • 2002
    • VanMeter,  Michael, “Experimental Investigation of Hybrid Rocket Combustion Instabilities,” MS Thesis, December 2002. Professor Heister
  • 2001
    • Weinstock,  Vladimir, “Modeling of Drop Trajectories and Drop/Wall Interactions in Gas Turbine Engine Sumps,” MS Thesis, December 2001. Professor Heister
  • 1997
    • Wernimont,  Eric, “Experimental Study of Combustion in Hydrogen Peroxide Hybrid Rockets,” PhD Dissertation, August 1997. Professor Heister
  • 2005
    • Bies,  Christopher, “Analysis of an Advanced Aero-Engine Bearing Chamber,” MS Thesis, Decmember 2005. Professor Heister
  • 2001
    • Xu,  Changhai, “Simulation of Orifice Internal Flows Including Cavitation and Turbulence,” PhD Dissertation, December 2001. Professor Heister
  • 1999
    • Yoon,  Suk, “Simulation of the Nonlinear Dynamics of Charged Liquids Using Boundary Element Methods,” MS Thesis, August 1999. Professor Heister
  • 2002
    • Yoon,  Suk, “A Fully Nonlinear Model for Atomization of High-Speed Jets,” PhD Dissertation, December 2002. Professor Heister
  • 2008
    • Trebs,  Adam, “Biannular Airbreathing Nozzle Rig Facility Development,” MS Thesis, August 2008. Professor Heister
  • 2005
    • Tsohas,  John, “Altitude Compensation Using Combustible Nozzle Liners,” MS Thesis, May 2005. Professor Heister
  • 2006
    • MacDonald,  Megan, “On the Nonlinear Dynamic Response of Plain Orifice Atomizers/Injectors,” MS Thesis, August 2006. Professor Heister
  • 2007
    • Rodkey,  Samuel, “Dynamics of Bearing Chamber Air and Oil Flows in Gas Turbine Engines,” MS Thesis, May 2007. Professor Heister
    • Richardson,  Renith, “Linear and Nonlinear Dynamcs of Swirl Injectors,” PhD Dissertation, May 2007. Professor Heister
  • 2008
    • Park,  Ki, “Modeling Dense Sprays Produced by Pressure-Swirl Atomizer,” MS Thesis, August 2008. Professor Heister
  • 2005
    • Harmon,  Michael, “Investigation of Combustible Liners for Altitude Compensation in Liquid Rocket Nozzles,” MS Thesis, May 2005. Professor Heister
  • 2008
    • Moss,  James, “Development of Tools for Experimental Analysis of Erosive Burning in/Near Slots in Solid Rocket Motors,” MS Thesis, August 2008. Professor Heister
  • 2010
    • James,  Mark, “Liquid and Gelled Sprays for Mixing Hypergolic Propellants Using an Impinging Jet Injection System,” MS Thesis, May 2010. Professor Heister
  • 2009
    • Sandroni,  Alexander, “Plume and Performance Measurements on a Plug Nozzle for Supersonic Business Jet Applications,” MS Thesis, May 2009. Professor Heister
    • Kowalkowski,  Michael, “Flame Sensing in Pulse Detonation Combustors using Diodes, Ion Probes, and High Speed Video,” MS Thesis, August 2009. Professor Heister
    • Tsohas,  John, “Hydrodynamics of Shear Coaxial Liquid Rocket Injectors,” PhD Dissertation, August 2009. Professor Heister
    • Ahn,  Benjamin, “Forced Excitation of Swirl Injectors using a Hydro-Mechanical Pulsator,” MS Thesis, August 2009. Professor Heister
  • 2010
    • Grebow,  Daniel, “Trajectory Design in the Earth-Moon System and Lunar South Pole Coverage,” PhD Dissertation, May 2010. Professor Howell
    • Vaquero,  Mar, “Ppoincare Sections and Resonant Orbits in the Restricted Three-Body Problem,” MS Thesis, May 2010. Professor Howell
    • Pavlak,  Thomas, “Mission Design Applications in the Earth-Moon System: Transfer Trajectories and Stationkeeping,” MS Thesis, May 2010. Professor Howell
    • Ozimek,  Martin, “Low-Thrust Trajectory Design and Optimization of Lunar South Pole Coverage Missions,” PhD Dissertation, may 2010. Professor Howell
  • 2006
    • Grebow,  Daniel, “Generating Orbits in the Circular Restricted Three-Body Problem with Application to Lunar South Pole Coverage,” MS Thesis, May 2006. Professor Howell
  • 2008
    • Gordon,  Dawn, “Transfers to Earth-Moon L2 Halo Orbits Using Lunar Proximity and Invariant Manifolds,” MS Thesis, August 2008. Professor Howell
  • 2006
    • Alonso,  Germán, “The Design of System-to-System Transfer Arcs using Invariant Manifolds in the Multi-Body Problem,” PhD Dissertation, December 2006. Professor Howell
  • 2007
    • Byron,  Jennifer, “Maneuver Costs for Transfers between Halo and Halo-like Orbits in the Circular Restricted Three-Body Problem,” None Dissertation, August 2007. Professor Howell
  • 2001
    • Anderson,  Jason, “Earth-to-Lissajous Transfers and Recovery Trajectories Using an Ephemeris Model,” MS Thesis, December 2001. Professor Howell
  • 1994
    • Barden,  Brian, “Using Stable Manifolds to Generate Transfers in the Circular Restricted Problem of Three Bodies,” MS Thesis, December 1994. Professor Howell
  • 2000
    • Barden,  Brian, “Application of Dynamical Systems Theory in Mission Design and Conceptual Development for Libration Point Missions,” PhD Dissertation, August 2000. Professor Howell
  • 1987
    • Baxter,  Michael, “Some Considerations of Actuator Dynamics in the Control of a Flexible Beam,” MS Thesis, May 1987. Professor Howell
  • 1991
    • Bell,  Julia, “The Impact of Solar Radiation Pressure on Sun-Earth Ll Libration Point Orbits,” MS Thesis, August 1991. Professor Howell
  • 1995
    • Bell,  Julia, “Primer Vector Theory in the Design of Optimal Transfers Involving Libration Point Orbits,” PhD Dissertation, December 1995. Professor Howell
  • 1999
    • Campbell,  Eric, “Bifurcations from Families of Periodic Solutions in the Circular Restricted Problem with Application to Trajectory Design,” PhD Dissertation, August 1999. Professor Howell
  • 1996
    • Ely,  Todd, “Dynamics and Control of Artificial Satellite Orbits with Multiple Tesseral Resonances,” PhD Dissertation, December 1996. Professor Howell
  • 1988
    • Ely,  Todd, “Orbit Determination of a Spacecraft with Undetermined Control Inputs,” MS Thesis, May 1988. Professor Howell
  • 1991
    • Gordon,  Steven, “Orbit Determination Error Analysis and Station-Keeping for Libration Point Trajectories,” PhD Dissertation, December 1991. Professor Howell
  • 2001
    • Guzmán,  José, “Spacecraft Trajectory Design in the Context of a Coherent Restricted Four-Body Problem,” PhD Dissertation, May 2001. Professor Howell
  • 1992
    • Hiday,  Lisa, “Optimal Transfers Between Libration-Point Orbits in the Elliptic Restricted Three-Body Problem,” PhD Dissertation, August 1992. Professor Howell
  • 2005
    • Kakoi,  Masaki, “Transfers between the Earth-Moon and Sun-Earth Systems using Manifolds and Transit Orbits,” MS Thesis, December 2005. Professor Howell
  • 1994
    • Keeter,  Timothy, “Station-Keeping Strategies for Libration Point Orbits: Target Point and Floquet Mode Approaches,” MS Thesis, August 1994. Professor Howell
  • 2004
    • Marchand,  Belinda, “Spacecraft Formation Keeping Near the Libration Points of the Sun-Earth/Moon System,” PhD Dissertation, August 2004. Professor Howell
  • 1988
    • Marsh,  Steven, “Sun-Synchronous Trajectory Design Using Consecutive Lunar Gravity Assists,” MS Thesis, May 1988. Professor Howell
  • 2000
    • Marchand,  Belinda, “Temporary Satellite Capture of Short-Period Jupiter Family Comets from the Perspective of Dynamical Systems,” MS Thesis, December 2000. Professor Howell
    • McInnes,  Allan, “Strategies for Solar Sail Mission Design in the Circular Restricted Three-Body Problem,” MS Thesis, August 2000. Professor Howell
  • 1987
    • Murdock,  Kelley, “The Application of Subarcsecond Star Tracker Technology to Interplanetary Navigation,” MS Thesis, December 1987. Professor Howell
  • 1998
    • Nuss,  Jason, “The Use of Solar Sails in the Circular Restricted Problem of Three Bodies,” MS Thesis, May 1998. Professor Howell
  • 2005
    • Patterson,  Christopher, “Representations of Invariant Manifolds for Applications in System-to-System Transfer Design,” MS Thesis, May 2005. Professor Howell
  • 1990
    • Pernicka,  Henry, “The Numerical Determination of Nominal Libration Point Trajectories and Development of Station-Keeping Strategy,” PhD Dissertation, May 1990. Professor Howell
  • 1986
    • Pernicka,  Henry, “The Numerical Determination of Lissajous Orbits in the Circular Restricted Three-Body Problem,” MS Thesis, December 1986. Professor Howell
  • 2005
    • Rausch,  Raoul, “Earth to Halo Orbit Transfer Trajectories,” MS Thesis, August 2005. Professor Howell
  • 1987
    • Shoultz,  Gregg, “Filtering Strategies for Non-Gravitational Accelerations With Application to the Global Positioning System,” MS Thesis, December 1987. Professor Howell
  • 1991
    • Spencer,  David Allen, “Multiple Lunar Encounter Trajectory Design Using a Multi-Conic Approach,” MS Thesis, December 1991. Professor Howell
  • 1985
    • Spencer,  David Bradley, “The Gravitational Influence of a Fourth Body on Periodic Halo Orbits,” MS Thesis, August 1985. Professor Howell
  • 1993
    • Wilson,  Roby, “A Design Tool for Constructing Multiple Lunar Swingby Trajectories,” MS Thesis, December 1993. Professor Howell
  • 1998
    • Wilson,  Roby, “Trajectory Design in the Sun-Earth-Moon Four Body Problem,” PhD Dissertation, December 1998. Professor Howell
  • 2008
    • Millard,  Lindsay, “Control of Satellite Imaging Arrays in Multi-Body Regimes,” PhD Dissertation, May 2008. Professor Howell
  • 2006
    • Ozimek,  Martin, “A Low Thrust Transfer Strategy to Earth-Moon Collinear Libration Point Orbits,” MS Thesis, December 2006. Professor Howell
  • 2008
    • Brown,  Todd, “Multi-Body Mission Design in the Saturnian System with Emphasis on Enceladus Accessibility,” MS Thesis, December 2008. Professor Howell
    • Vavrina,  Matthew, “A Hybrid Genetic Algorithm Approach to Global Low-Thrust Trajectory Optimization,” MS Thesis, December 2008. Professor Howell
    • Irrgang,  Lucia, “Investigation of Transfer Trajectories to and from the Equilateral Libration Points L4 and L5 in the Earth-Moon System,” MS Thesis, August 2008. Professor Howell
  • 2010
    • Huu,  Patrick, “Langmuir Probe Diagnostics on the Leap Electrothermal Thruster,” MS Thesis, May 2010. Professor Hrbud
  • 2005
    • Genov,  Dentcho, “Electromagnetic Confinement of Nuclear Plasma: Propulsion Prospectives,” MS Thesis, May 2005. Professor Hrbud
    • Butt,  Adam, “Acoustic Inertial Confinement Fusion: Potential Applications to Space Power and Propulsion,” MS Thesis, December 2005. Professor Hrbud
  • 2006
    • Delgado,  Jorge, “Design and Validation of a Test Facility for Coaxial Radio Frequency Plasma Thrusters,” MS Thesis, August 2006. Professor Hrbud
  • 2009
    • Seah,  Chze Eng, “Stochastic Linear Hybrid Systems: Modeling, Estimation, and Application,” PhD Dissertation, May 2009. Professor Hwang
  • 2008
    • Hahn,  Jeeyeon, “A Rule-Based Conflict Resolution Algorithm for the Next Generation Air Transportation System (NextGen),” MS Thesis, May 2008. Professor Hwang
  • 2009
    • Kotecha,  Pankit, “Tube Network and Dynamic Sectorization of Airspace for Next Generation Air Transportation System (NextGen),” MS Thesis, May 2009. Professor Hwang
    • Aligawesa,  Alinda, “The Detection and Localization of Traffic Congestion for Highway Traffic Systems Using Hybrid Estimation Techniques,” MS Thesis, August 2009. Professor Hwang
  • 2010
    • Cunzeman,  Kara, “Cooling Effects on Photo-Stimulated Luminescence Spectroscopy of Ruby for 3-D Stress Characterization in Thermal Barrier Coatings,” MS Thesis, May 2010. Professor Imbrie
  • 2005
    • Mamun,  Md-Wahid, “Investigation of the Photo Stimulated Luminescence Spectroscopy Technique for Measuring 3-D Stresses,” PhD Dissertation, December 2005. Professor Imbrie
  • 2008
    • Raghavan,  Seetha, “The Development of Photo-Stimulated Luminescence Spectroscopy for 3-D Stress Measurements,” PhD Dissertation, May 2008. Professor Imbrie
  • 1986
    • Parpia,  Ijaz, “Multidimensional Time Dependent Method of Characteristics,” PhD Dissertation, May 1986. Professor Kentzer
  • 1972
    • Chiu,  Bang-Ming, “A Proposed Technique for Discretization of Boundary Conditions in Time-Dependent, Viscous, Compressible Flows,” PhD Dissertation, December 1972. Professor Kentzer
    • Ferreira,  Sérgio, “Forced Convection Condensation of Vapor Flowing Around A Circular Cylinder in Presence of Inert Gas, Gravitational Field and Superheating,” PhD Dissertation, January 1972. Professor Kentzer
    • Novick,  Allan, “Fluid Dynamics of Meteor Explosions in a Heterogeneous Atmosphere,” PhD Dissertation, June 1972. Professor Kentzer
  • 1992
    • Thornton,  Anthony, “Application of a Solution Adaptive Grid to Flow Over an Embedded Cavity,” PhD Dissertation, May 1992. Professor Kentzer/Williams
  • 2006
    • Khoo,  Teng, “Effect of Bondline Thickness on Mixed Mode Fracture of Adhesive Joints,” MS Thesis, December 2006. Professor Kim
    • Park,  Hwun, “Resistance of Adhesively Bonded Composite Lap Joints to Damage by Transverse Ice Impact,” MS Thesis, May 2006. Professor Kim
  • 2004
    • Keune,  John, “Development of a Hail Ice Impact Model and the Dynamic Compressive Strength Properties of Ice,” MS Thesis, May 2004. Professor Kim
  • 2006
    • Kwon,  Hyukbong, “Buckling and Debond Growth of Partial Debonds in Adhesively Bonded Composite Flanges,” PhD Dissertation, May 2006. Professor Kim
  • 2005
    • Spohn,  Jason, “The Design Build and Testing of an Infrared Aim Point Biasing Structure,” MS Thesis, December 2005. Professor Kim
  • 2006
    • McDonald,  Seth, “Design Methodology for Airships of Non-Axisymmetric Cross-Section Geometry,” MS Thesis, May 2006. Professor Kim
    • Hsieh,  Kelli, “Study of Fatigue Behavior of Embedded Copper in Multifunctional Composite Materials,” MS Thesis, May 2006. Professor Kim
    • Nightingale,  Jay, “Experimental Correlation between Intrinsic Material Properties and the Failure of Composite Laminates under Ice Impact,” MS Thesis, December 2006. Professor Kim
    • Lee,  Jungmin, “Prediction of Adhesive Stress and Strain Solution and Failure Criterion of Single Lap Bonded Joints,” PhD Dissertation, August 2006. Professor Kim
  • 1974
    • Cook,  Richard, “A Mathematical Theory of Viscous Fluids with Microstructure & Microtemperature,” PhD Dissertation, December 1974. Professor Koh
  • 1970
    • Mitchell,  Richard, “Necessary and Sufficient Conditions for Sample Stability of Second Order Stochastic Differential Equations,” PhD Dissertation, August 1970. Professor Kozin
  • 1967
    • Hugus,  Jack, “An Investigation of the Technique of Statistical Linearization,” PhD Dissertation, August 1967. Professor Kozin
  • 2010
    • Singh,  Deepti, “Study of Surrogates for Conventional and Synthetic Aviation Jet Fuels,” MS Thesis, August 2010. Professor Li Qiao
  • 2009
    • Gates,  Kristin, “Theory and Applications of Ballute Aerocapture and DUal-Use Ballute Systems for Exploration of the Solar System,” PhD Dissertation, August 2009. Professor Longuski
  • 2010
    • Pollock,  George, “Propellantless Spacecraft Maneuvers Using the Electromagnetic Lorentz Force,” PhD Dissertation, May 2010. Professor Longuski
  • 2006
    • Ayoubi,  Mohammad, “Analytical Theory for the Motion of Spinning Rigid Bodies,” PhD Dissertation, December 2006. Professor Longuski
  • 1999
    • Bonfiglio,  Eugene, “Automated Design of Gravity-Assist and Aerogravity-Assist Trajectories,” MS Thesis, August 1999. Professor Longuski
    • Gick,  Rebecca, “Analysis of the Motion of Spinning, Thrusting Spacecraft,” PhD Dissertation, December 1999. Professor Longuski
  • 2000
    • Heaton,  Andrew, “A Systematic Method for Gravity-Assist Mission Design,” MS Thesis, December 2000. Professor Longuski
  • 2002
    • Johnson,  Wyatt, “Analysis and Design of Aeroassisted Interplanetary Missions,” PhD Dissertation, December 2002. Professor Longuski
  • 2004
    • McConaghy,  Thomas, “Design and Optimization of Interplanetary Spacecraft Trajectories,” PhD Dissertation, December 2004. Professor Longuski
  • 1993
    • Patel,  Moonish, “Automated Design of Delta-V Gravity-Assist Trajectories For Solar System Exploration,” MS Thesis, August 1993. Professor Longuski
  • 2001
    • Petropoulos,  Anastassios, “A Shape-Based Approach to Automated, Low-Thrust, Gravity-Assist Trajectory Design,” PhD Dissertation, May 2001. Professor Longuski
  • 1993
    • Puig-Suari,  Jordi, “Aerobraking Tethers for the Exploration of the Solar System,” PhD Dissertation, August 1993. Professor Longuski
  • 1996
    • Sims,  Jon, “Delta-V Gravity-Assist Trajectory Design: Theory and Practice,” PhD Dissertation, December 1996. Professor Longuski
  • 1997
    • Tragesser,  Steven, “Analysis and Design of Aerobraking Tethers,” PhD Dissertation, December 1997. Professor Longuski
  • 1993
    • Tsiotras,  Panagiotis, “Analytic Theory and Control of the Motion of Spinning Rigid Bodies,” PhD Dissertation, May 1993. Professor Longuski
  • 1990
    • Williams,  Steven, “Automated Design of Multiple Encounter Gravity-Assist Trajectories,” MS Thesis, August 1990. Professor Longuski
  • 2006
    • Okutsu,  Masataka, “Design of Human Missions to Mars and Robotic Missions to Jupiter,” PhD Dissertation, December 2006. Professor Longuski
    • Landau,  Damon, “Strategies for the Sustained Human Exploration of Mars,” PhD Dissertation, December 2006. Professor Longuski
  • 2008
    • Yam,  Chit-Hong, “Design of Missions to the Outer Planets and Optimization of Low-Thrust, Gravity-Assist Trajectories via Reduced Parameterization,” PhD Dissertation, May 2008. Professor Longuski
  • 2010
    • Thirumurthy,  Deepak, “Design and Analysis of Noise Suppression Exhaust Nozzle Systems,” MS Thesis, May 2010. Professor Lyrintzis
    • Martha,  Chandra, “Large Eddy Simulations of 2-D and 3-D Spatially Developing Mixing Layers,” MS Thesis, May 2010. Professor Lyrintzis
  • 2001
    • Ekici,  Kivanc, “Parallel Computing Techniques for Rotorcraft Aerodynamics,” PhD Dissertation, December 2001. Professor Lyrintzis
  • 2006
    • Garrison,  Loren, “Computational Fluid Dynamics Analysis and Noise Modeling of Jets with Internal Forced Mixers,” PhD Dissertation, May 2006. Professor Lyrintzis
  • 2003
    • Garrison,  Loren, “Jet Noise Models for Forced Mixer Noise Predictions,” MS Thesis, December 2003. Professor Lyrintzis
  • 2000
    • Koutsavdis,  Evangelos, “On the Development of a Jet Noise Prediction Methodology,” PhD Dissertation, August 2000. Professor Lyrintzis
  • 2003
    • Uzun,  Ali, “3-D Large Eddy Simulation for Jet Aeroacoustics,” PhD Dissertation, December 2003. Professor Lyrintzis
  • 2010
    • Lo,  Shih-Chieh, “Numerical Simulations of Supersonic Jet Flows,” PhD Dissertation, August 2010. Professor Lyrintzis
  • 2006
    • Oliver,  Anthony, “Evaluation of Two-Dimensional High-Speed Turbulent Boundary Layer and Shock-Boundary Layer Interaction Computations with the Overflow Code,” MS Thesis, August 2006. Professor Lyrintzis/Blaisdell
  • 1997
    • Koutsavdis,  Evangelos, “An Investigation of Kirchhoff's Methodologies for Computational Aeroacoustics,” MS Thesis, May 1997. Professor Lyrintzis/Blaisdell
  • 1999
    • Spyropoulos,  John, “A New Scheme for the Navier-Stokes Equations Employing Alternating-Direction Operator Splitting and Domain Decomposition,” PhD Dissertation, May 1999. Professor Lyrintzis/Blaisdell
  • 2008
    • Kube-McDowell,  Matthew, “Parametric Study of the Generation of Shocks in Near-Critical Turbofan Nozzles,” MS Thesis, December 2008. Professor Lyrintzis/Professor Blaisdell
  • 2006
    • Smith,  Randolph, “Computational Modeling of High Frequency Combustion Instability in a Single-Element Liquid Rocket Engine,” MS Thesis, August 2006. Professor Merkle
  • 2007
    • Gujarathi,  Amit, “Analysis of an Axisymmetric Rocket Based Combined Cycle Engine,” MS Thesis, August 2007. Professor Merkle
    • Childress,  Karla, “Supersonic Analysis of Plume Characteristics for Asymmetric Nozzles,” MS Thesis, May 2007. Professor Merkle
  • 2006
    • Sardeshmukh,  Swanand, “Performance Analysis of Coupled and Segregated CFD Methods,” MS Thesis, May 2006. Professor Merkle
  • 2009
    • Jung,  Hogirl, “Cojugate Analysis of Asymmetric Heating of Supercritical Fluids in Rectangular Channels,” PhD Dissertation, August 2009. Professor Merkle
  • 2008
    • Corpening,  Jeremy, “Computational Analysis of a Pulsed Inductive Plasma Accelerator,” PhD Dissertation, May 2008. Professor Merkle/Hrbud
  • 1994
    • Stuerman,  Michael, “Surface Thermal Loading Imposed By A Sonic Or Supersonic Impinging Jet,” MS Thesis, December 1994. Professor Messersmith
  • 1982
    • Tsuchiya,  Toshiaki, “Aerothermodynamics of Axial-Flow-Compressors with Water Ingestion,” PhD Dissertation, May 1982. Professor Murthy
  • 1983
    • Hong,  Seung, “Large Eddy Interactions in Curved Wall Boundary Layers - Model and Implications,” PhD Dissertation, December 1983. Professor Murthy
  • 1993
    • Laing,  Peter, “Gas Turbine Prediffuser-Combustor Performance During Operation With Air- Water Mixture,” MS Thesis, August 1993. Professor Murthy
  • 1995
    • Love,  James, “Scalability of Mechanical and Thermal Loads in Underexpanded Jet Impact,” MS Thesis, August 1995. Professor Murthy
  • 1991
    • Minster,  Todd, “Prediffuser-Combustor Model Studies Under Conditions of Water Ingestion in Engines,” MS Thesis, August 1991. Professor Murthy
  • 1995
    • Shastri,  Ramachandra, “Gas Turbine Combustor Operation With Different Phases of Water in Air Supply,” MS Thesis, May 1995. Professor Murthy
  • 1982
    • Renie,  John, “Combustion Modeling of Composite Solid Propellants,” PhD Dissertation, December 1982. Professor Osborn
  • 1990
    • Armstrong, Jr.,  Gerald, “An Analysis of the Instantaneous Performance Characteristics of Nozzleless Solid Rocket Motors,” MS Thesis, May 1990. Professor Osborn
  • 1980
    • Barger,  Mary, “The Effect of Erosive Burning of Temperature Sensitivity in Composite Solid Propellants,” MS Thesis, May 1980. Professor Osborn
  • 1982
    • Blomshield,  Frederick, “Pressure Oscillation Analysis of a Research Dump Combustor Ramjet Experiencing Combustion Instability,” MS Thesis, August 1982. Professor Osborn
  • 1988
    • Blomshield,  Frederick, “Nitramine Composite Propellant Modeling,” PhD Dissertation, December 1988. Professor Osborn
  • 1983
    • Cassady,  Robert, “Measurement of the Arc Chamber Pressure Distribution in a Magnetoplasmadynamic Thruster,” PhD Dissertation, December 1983. Professor Osborn
  • 1982
    • Frederick, Jr.,  Robert, “A Photographic Study of the Effect of Acceleration on Composite Propellant Combustion,” MS Thesis, August 1982. Professor Osborn
  • 1988
    • Frederick, Jr.,  Robert, “Combustion Mechanics of Wide Distribution Solid Propellants,” PhD Dissertation, May 1988. Professor Osborn
  • 1987
    • Gaunce,  Michael, “A Study of Temperature Sensitivity and Variable Pressure Exponents in AP/HTPS Composite Propellants,” MS Thesis, December 1987. Professor Osborn
  • 1983
    • Geyer,  Mark, “Solid Propellant Flame Temperature Measurements,” MS Thesis, May 1983. Professor Osborn
  • 1987
    • Hamke,  Rolf, “A Theoretical Study of the Temperature Sensitivity of a Solid Rocket Motor,” MS Thesis, December 1987. Professor Osborn
  • 1981
    • Lilley,  Jay, “The Design and Operation of a Servo-Controlled Solid Propellant Strand Window Bomb,” MS Thesis, December 1981. Professor Osborn
  • 1984
    • Matson,  John, “Combustion Response Measurements of Solid Rocket Propellant by a Microwave Technique,” MS Thesis, May 1984. Professor Osborn
    • McGrath,  David, “Propellant Solid Phase Temperature Measurements,” MS Thesis, December 1984. Professor Osborn
  • 1986
    • Miller,  David, “A Numerical Heat Transfer Model for an Advanced Solar Thermal Propulsion System,” PhD Dissertation, August 1986. Professor Osborn
  • 1981
    • Nack,  Kevin, “A Study of the Aerodynamic Breakup of Molten Aluminum Particles in Two-Phase Flow,” MS Thesis, December 1981. Professor Osborn
  • 1987
    • Pressley, Jr.,  Homer, “In Situ Burning-Rate Determination Using Flash Radiography,” PhD Dissertation, August 1987. Professor Osborn
  • 2009
    • Kim,  Seung-il, “Damage Detection of Sandwich Structure using Time Domain Reflectometry,” MS Thesis, December 2009. Professor Pipes
  • 2006
    • Joshi,  Manasi, “Effect of Temperature on Mode I Fracture Toughness of Certain Polymeric Foams,” MS Thesis, August 2006. Professor Pipes
  • 2011
    • Goyings,  Ryan, “Nondestructive and Strain Testing of Composite Sandwich Panels,” MS Thesis, May 2011. Professor R. Byron Pipes
  • 2008
    • Lana,  Carlos, “Constrained State Estimation and Control,” PhD Dissertation, May 2008. Professor Rotea
  • 2001
    • D'Amato,  Fernando, “Algorithms for the Maximization of Linear Fractional Transformations,” PhD Dissertation, December 2001. Professor Rotea
  • 1992
    • Eudaric,  Alain, “Ellipsoid Methods for Multiobjective Control with Quadratic Performance Measures,” MS Thesis, May 1992. Professor Rotea
  • 2002
  • 2003
    • Lana,  Carlos, “Characterization of Color Printers Using Robust Parameter Estimation,” MS Thesis, December 2003. Professor Rotea
  • 1996
    • Viassolo,  Daniel, “Implementation of Digital Controllers,” MS Thesis, August 1996. Professor Rotea
  • 2006
    • Saheba,  Ruchir, “Real-time Thermal Observer for Electric Machines,” MS Thesis, August 2006. Professor Rotea
  • 2005
    • Lovera Yepes,  Javier, “Algorithms for Aircraft Intent Inference and Trajectory Prediction,” MS Thesis, December 2005. Professor Rotea/Hwang
  • 2000
    • Long,  Matthew, “Characterization of Substrate Geometries for the Catalytic Decomposition of Hydrogen Peroxide,” MS Thesis, August 2000. Professor Rusek
    • Frolik,  Steven, “Hypergolic Liquid Fuels for Use with Rocket Grade Hydrogen Peroxide,” MS Thesis, August 2000. Professor Rusek
  • 2001
    • Lim,  Kok, “Anodic Studies of the Aluminum-Hydrogen Peroxide Semi-Fuel Cell,” MS Thesis, December 2001. Professor Rusek
  • 20100
    • Matsutomi,  Yu, “Studies on Pressure-Gain Combustion Engines,” PhD Dissertation, May 20100. Professor S. Heister
  • 1979
    • Sprandel,  James, “Structural Parameter Identification of Member Characteristics in a Finite Element Model,” PhD Dissertation, December 1979. Professor Schiff
  • 1978
    • Guthrie,  Gregory, “A Minicomputer Based Interactive Graphics Computer System with Illustrative Application to Structural Data Analysis,” PhD Dissertation, December 1978. Professor Schiff
  • 1982
    • Yucuis,  William, “Computer Simulation of a Multiaxis Air-to-Air Tracking Task Using the Optimal Pilot Control Model,” MS Thesis, December 1982. Professor Schmidt
  • 1988
    • Anderson,  Mark, “Actuation Constraints in Multivariable Flight Control Systems,” PhD Dissertation, May 1988. Professor Schmidt
  • 1982
    • Bacon,  Barton, “A Modern Approach to Pilot/Vehicle Analysis and the Neal-Smith Criteria,” MS Thesis, December 1982. Professor Schmidt
  • 1991
    • Bacon,  Barton, “Order Reduction for Closed-Loop Systems,” PhD Dissertation, December 1991. Professor Schmidt
  • 1984
    • Biezad,  Daniel, “Time Series Analysis of Closed-Loop Pilot Vehicles Dynamics,” PhD Dissertation, May 1984. Professor Schmidt
  • 1986
    • Chen,  Ta, “An Interactive Synthesis Approach for Robust Active Flutter Suppression Control Law Decision,” PhD Dissertation, December 1986. Professor Schmidt
  • 1988
    • Garg,  Sanjay, “Model-Based Analysis and Cooperative Synthesis of Control and Display Augmentation Per Piloted Flight Vehicles,” PhD Dissertation, May 1988. Professor Schmidt
  • 1982
    • Gilbert,  Michael, “Dynamic Modeling and Active Control of Aeroelastic Aircraft,” MS Thesis, December 1982. Professor Schmidt
  • 1994
    • Gilbert,  Michael, “Multilevel Control-Structure Design Using LQG Design Sensitivity Analysis Techniques,” PhD Dissertation, December 1994. Professor Schmidt
  • 1983
    • Innocenti,  Mario, “Cooperative Pilot-Optimal Augmentation System Synthesis For Complex Flight Vehicles,” PhD Dissertation, May 1983. Professor Schmidt
  • 1980
    • Prasad,  Shivshankar, “Design of Pilot Optimal Control Systems for Air to Air Tracking,” MS Thesis, December 1980. Professor Schmidt
  • 1988
    • Schlossberg,  Valerie, “Earth-Mars Trajectories Using a Lunar Flyby,” MS Thesis, December 1988. Professor Schmidt
    • Silk,  Anthony, “Modeling Human Perception and Estimation of Kinematic Responses During Aircraft Landing,” MS Thesis, August 1988. Professor Schmidt
    • Townsend,  Barbara, “The Evaluation of Three Control Laws for the CH-47 Helicopter,” MS Thesis, May 1988. Professor Schmidt
    • Williamson,  Robert, “Microcomputer-Based Flight Simulation,” MS Thesis, May 1988. Professor Schmidt
  • 1984
    • Yuan,  Pin-Jar, “Identification of Pilot Dynamics and Task Objectives from Man-in-the-Loop Simulation,” PhD Dissertation, May 1984. Professor Schmidt
  • 2009
    • Borg,  Matthew, “Laminar Instability and Transition on the X-51A,” PhD Dissertation, August 2009. Professor Schneider
  • 2008
    • Hannon,  Michael, “Evaluation of Diffuser Modifications for the Boeing/AFOSR Mach-6 Quiet Tunnel,” MS Thesis, August 2008. Professor Schneider
  • 2007
    • Segura,  Rodrigo, “Oscillations in a Forward-Facing Cavity Measured Using Laser-Differential Interferometry in a Hypersonic Quiet Tunnel,” MS Thesis, December 2007. Professor Schneider
  • 1994
    • Alcenius,  Timothy, “Development of Square Nozzles for High-Speed, Low-Disturbance Wind Tunnels,” MS Thesis, December 1994. Professor Schneider
  • 2005
    • Borg,  Matthew, “Characteristics of the Contraction of the Boeing/AFOSR Mach-6 Quiet Tunnel,” MS Thesis, December 2005. Professor Schneider
  • 1995
    • Haven,  Christine, “Measurements of Laminar-Turbulent Transition on Supersonic Wind-Tunnel Walls,” MS Thesis, May 1995. Professor Schneider
  • 1991
    • Johnston,  Robert, “Unsteady Propeller/Wing Aerodynamic Interactions,” PhD Dissertation, December 1991. Professor Schneider
  • 1998
    • Ladoon,  Dale, “Wave Packets Generated by a Surface Glow Discharge on a Cone at Mach 4,” PhD Dissertation, December 1998. Professor Schneider
  • 2003
    • Matsumura,  Shin, “Streamwise Vortex Instability and Hypersonic Boundary-Layer Transition on the Hyper-2000,” MS Thesis, December 2003. Professor Schneider
  • 1992
    • Moen,  Jon, “Design, Testing and Analysis of a High-Speed, Time-Resolved Non-Intrusive Skin Friction Sensor System,” MS Thesis, December 1992. Professor Schneider
  • 1996
    • Munro,  Scott, “Effects of Elevated Driver-Tube Temperature on the Extent of Quiet Flow in the Purdue Ludwieg Tube,” MS Thesis, December 1996. Professor Schneider
    • Randall,  Laura, “Receptivity Experiments on a Hemispherical Nose at Mach 4,” MS Thesis, May 1996. Professor Schneider
  • 2005
    • Robarge,  Tyler, “Laminar Boundary-Layer Instabilities on Hypersonic Cones: Computations for Benchmark Experiments,” MS Thesis, August 2005. Professor Schneider
  • 2000
    • Rufer,  Shann, “Development of Burst-Diaphragm and Hot-Wire Apparatus for Use in the Mach-6 Purdue Quiet-Flow Ludwieg Tube,” MS Thesis, December 2000. Professor Schneider
  • 1997
    • Schmisseur,  John, “Receptivity of the Boundary Layer on a Mach-4 Elliptic Cone to Laser-Generated Localized Freestream Perturbations,” PhD Dissertation, December 1997. Professor Schneider
  • 2005
    • Skoch,  Craig, “Disturbances from Shock/Boundary-Layer Interactions Affecting Upstream Hypersonic Flow,” PhD Dissertation, December 2005. Professor Schneider
  • 2001
    • Skoch,  Craig, “Final Assembly and Initial Testing of the Purdue Mach-6 Quiet-Flow Ludwieg Tube,” MS Thesis, December 2001. Professor Schneider
  • 2002
    • Swanson,  Erick, “Mean Flow Measurements and Cone Flow Visualization at Mach 6,” MS Thesis, December 2002. Professor Schneider
  • 1995
    • Zhang,  Shucheng, “Molecular-Mixing Measurements and Turbulent-Structure Visualizations in a Round Jet with Tabs,” PhD Dissertation, May 1995. Professor Schneider
  • 2006
    • Juliano,  Thomas, “Nozzle Modifications for High-Reynolds-Number Quiet Flow in the Boeing/AFOSR Mach-6 Quiet Tunnel,” MS Thesis, December 2006. Professor Schneider
  • 2009
    • Wheaton,  Bradely, “Roughness-Induced Instability in a Laminar Boundary Layer at Mach 6,” MS Thesis, December 2009. Professor Schneider
  • 2008
    • Swanson,  Erick, “Boundary-Layer Transition on Cones at Angle of Attack in a Mach-6 Quiet Tunnel,” PhD Dissertation, August 2008. Professor Schneider
  • 2009
    • Casper,  Katya, “Hypersonic Wind-Tunnel Measurements of Boundary-Layer Pressure Fluctuations,” MS Thesis, August 2009. Professor Schneider
  • 1971
    • Luo,  Fang-Fu, “Non-Linear Oscillations of a Liquid Excited by Periodic Vertical Forces Under Weak of Zero Gravity Conditions,” PhD Dissertation, January 1971. Professor Shu
  • 1964
    • Glauz,  William, “Aerodynamic Forces on Oscillating Cones and Ogive Bodies in Supersonic Flow,” PhD Dissertation, January 1964. Professor Shu
  • 1983
    • Yousuff,  Ajmal, “Covariance Equivalent Realizations: Development and Applications to Model and Controller Reduction,” PhD Dissertation, August 1983. Professor Skelton
  • 1992
    • Bosler,  Patrick, “Design and Implementation of a Digital Controller for a Laboratory Helicopter Model,” MS Thesis, August 1992. Professor Skelton
  • 1987
    • Collins,  Emmanuel, “State Covariance Assignment of Discrete Systems: Development & Applications,” PhD Dissertation, May 1987. Professor Skelton
  • 1981
    • Chiu,  Di, “Optimal Sensor/Actuator Selection, Number, and Placement for Linear Stochastic Systems,” PhD Dissertation, May 1981. Professor Skelton
  • 1989
    • Damra,  Fayez, “Optimal Covariance Control For Linear Continuous and Discrete Time Systems,” MS Thesis, May 1989. Professor Skelton
  • 1983
    • Delorenzo,  Michael, “Selection of Noisy Sensors and Actuators for Regulation of Linear Systems,” PhD Dissertation, May 1983. Professor Skelton
  • 1986
    • DeVillemagne,  Christain, “Model and Controller Reduction: A New Approach Using Oblique Projections and Canonical Interactions,” MS Thesis, December 1986. Professor Skelton
  • 1994
    • Grigoriadis,  Karolos, “Alternating Projection Techniques for Multiobjective Control,” PhD Dissertation, August 1994. Professor Skelton
  • 1990
    • Hsieh,  Chen, “Control of Second Order Information for Linear Systems,” MS Thesis, May 1990. Professor Skelton
  • 1987
    • Hu,  Anren, “Model Cost Analysis of Flexible Structures: Modeling Flexible Structures For Control Design,” PhD Dissertation, May 1987. Professor Skelton
  • 1993
    • Iwasaki,  Tetsuya, “On the Effect of Matrix Cracks on Laminate Strength,” PhD Dissertation, December 1993. Professor Skelton
  • 1991
    • Kim,  Jae, “Model Reduction, Sensor/Actuator Selection and Control System Redesign for Large Flexible Structures,” PhD Dissertation, December 1991. Professor Skelton
  • 1994
    • Kimura,  Tsunekazu, “A Fault-Tolerant Controller Design Using Alternating Projection Techniques,” MS Thesis, December 1994. Professor Skelton
  • 1988
    • King,  Andrew, “Discretization and Model Reduction for a Class of Nonlinear Systems,” PhD Dissertation, December 1988. Professor Skelton
  • 1991
    • Liu,  Ketau, “Q-Markov Cover Identification and Integrated MCA-OVC Controller Design for Flexible Structures,” PhD Dissertation, December 1991. Professor Skelton
  • 1997
    • Lu,  Jianbo, “Robust Control and Control System Integration Using Finite-Signal-to-Noise Model,” PhD Dissertation, December 1997. Professor Skelton
  • 1987
    • Norris,  Gregory, “Selection of Non-Ideal Noisy Actuators and Sensors in the Control of Linear Systems,” MS Thesis, May 1987. Professor Skelton
  • 1988
    • Okada,  Kenji, “Sensitivity Reducing Controller Design Method for Uncertain Parameter Systems,” MS Thesis, May 1988. Professor Skelton
  • 1997
    • Shi,  Guojun, “Integrated Identification, Modeling and Control with Applications,” PhD Dissertation, December 1997. Professor Skelton
  • 1993
    • Swei,  Shan-Min, “Quadratic Stabilization of Uncertain Systems: Reduced Gain Controllers, Order Reduction, and Quadratic Controllability,” PhD Dissertation, May 1993. Professor Skelton
  • 1984
    • Wagie,  David, “Model and Controller Reduction of Uncertain Systems Using Covariance Equivalent Realizations,” PhD Dissertation, August 1984. Professor Skelton
  • 1981
    • Yedavalli,  RamaKrishna, “Control Design for Parameter Sensitivity Reduction in Linear Regulators: Application to Large Flexible Space Structures,” PhD Dissertation, May 1981. Professor Skelton
  • 1972
    • Zoeller,  Michael, “The Stability of Time-Dependent, Conducting Boussinesq Fluids by the Method of Energy,” PhD Dissertation, June 1972. Professor Stanišić
  • 1979
    • Greenburg,  Alan, “A Contribution to the Stability of Electrically Conducting Boussinesq Fluids by the Energy Method,” PhD Dissertation, August 1979. Professor Stanišić
    • Kendall,  Donald, “The Effects of Joule Heat on Turbulent Dispersion of Temperature in High Reynolds Number Flow,” PhD Dissertation, May 1979. Professor Stanišić
  • 1965
    • McNitt,  Richard, “Irreversible Thermodynamics and Continuum Mechanics in the Presence of Electromagnetic Fields,” PhD Dissertation, January 1965. Professor Stanišić
  • 1971
    • Neulieb,  Robert, “Relativistic Effects of Nonuniform Motion on the Propagation of an Electromagnetic Wave,” PhD Dissertation, January 1971. Professor Stanišić
  • 2009
    • Wypyszynski,  Aaron, “Flight Testing of Small Remotely Piloted Aircraft for System Identification,” MS Thesis, August 2009. Professor Sullivan
  • 2006
    • Miller,  Christopher, “High Altitude Airship Simulation and Control,” MS Thesis, May 2006. Professor Sullivan
    • Huang,  Chih-Yung, “Molecular Sensors for MEMS,” PhD Dissertation, May 2006. Professor Sullivan
  • 2009
    • Londner,  Edward, “The Use of an Inertial Measurement Unit in the Flight Testing of a Small, Remote-Piloted Air Vehicle,” MS Thesis, August 2009. Professor Sullivan
  • 1986
    • Barron,  Dean, “LDV Measurements in an Angular Combustion Model,” MS Thesis, August 1986. Professor Sullivan
  • 1988
    • Behrens,  Ricky, “An Experimental Investigation of Wind Tunnel Quality,” MS Thesis, December 1988. Professor Sullivan
  • 1996
    • Bucci,  Gregory, “Modeled High Lift Wake Flows at High Reynolds Number,” MS Thesis, December 1996. Professor Sullivan
  • 1995
    • Burns,  Steven, “Fluorescent Pressure Sensitive Paints for Aerodynamic Rotating Machinery,” MS Thesis, December 1995. Professor Sullivan
  • 1999
    • Campbell,  Bryan, “Aerodynamic Losses and Surface Heat Transfer in a Strut/Endwall Intersection Flow,” PhD Dissertation, December 1999. Professor Sullivan
  • 1993
    • Campbell,  Bryan, “Temperature Sensitive Flourescent Paints for Aerodynamics Applications,” MS Thesis, May 1993. Professor Sullivan
  • 2004
    • Crafton,  Jimmy, “The Impingement of Sonic and Sub-Sonic Jets Onto a Flat Plate at Inclined Angles,” PhD Dissertation, December 2004. Professor Sullivan
  • 1980
    • Chang,  Li, “The Theoretical Performance of High Efficiency Propellers,” PhD Dissertation, December 1980. Professor Sullivan
  • 1990
    • Davis,  Roger, “Secondary Flow and Three-Dimensional Separation in Curved Circular Duct,” PhD Dissertation, May 1990. Professor Sullivan
  • 1993
    • Detert,  Bruce, “The Design and Testing of a High Reynolds Number Vortex Tube,” MS Thesis, December 1993. Professor Sullivan
  • 1990
    • Dwenger,  Richard, “Laser Doppler Velocimeter Measurements and Laser Sheet Imaging in an Annular Combustor Model,” MS Thesis, August 1990. Professor Sullivan
  • 1998
    • Erausquin, Jr.,  Richard, “Cryogenic Temperature- and Pressure-Sensitive Fluorescent Paints,” MS Thesis, December 1998. Professor Sullivan
  • 2003
    • Gnanamanickam,  Ebenezer, “Piezoelectric Ceramics For High Temperature Aerospace Applications,” MS Thesis, December 2003. Professor Sullivan
  • 2005
    • Gregory,  James, “Development of Fluidic Oscillators as Flow Control Actuators,” PhD Dissertation, August 2005. Professor Sullivan
  • 2002
    • Gregory,  James, “Unsteady Pressure Measurements in a Turbocharger Compressor using Porous Pressure-Sensitive Paint,” MS Thesis, December 2002. Professor Sullivan
  • 2000
    • Guille,  Marianne, “Luminescent Paint Measurement Systems for Aerodynamics Applications,” MS Thesis, May 2000. Professor Sullivan
  • 1993
    • Hoffenberg,  Robert, “Filtered Particle Scattering: Laser Velocimetry Using An Iodine Filter,” MS Thesis, December 1993. Professor Sullivan
  • 1997
    • Hoffenberg,  Robert, “Simulation of High-Lift Wake Behavior,” PhD Dissertation, December 1997. Professor Sullivan
  • 2000
    • Lachendro,  Nathan, “Flight Testing of Pressure Sensitive Paint Using a Phase Based Laser Scanning System,” MS Thesis, May 2000. Professor Sullivan
  • 1996
    • Liu,  Tianshu, “Applications of Temperature-Sensitive Luminescent Paints in Aerodynamics,” PhD Dissertation, May 1996. Professor Sullivan
  • 1990
    • MacLean,  Roderick, “The Flowfield Around a Stovl Aircraft Model in Ground Effect,” MS Thesis, December 1990. Professor Sullivan
  • 1993
    • Mains,  Deanna, “Transfer Trajectories from Earth Parking Orbits to L1 Halo Orbits,” MS Thesis, May 1993. Professor Sullivan
  • 1984
    • Miller,  Christopher, “Optimally Designed Propellers Constrained by Noise,” PhD Dissertation, December 1984. Professor Sullivan
  • 1985
    • Rashed,  Ibrahim, “An Experimental Investigation of the Development and Growth of Counter Rotating Vortices in a Curved Rectangular Duct,” PhD Dissertation, December 1985. Professor Sullivan
  • 1999
    • Sakaue,  Hirotaka, “Porous Pressure Sensitive Paints for Aerodynamic Applications,” MS Thesis, December 1999. Professor Sullivan
  • 2003
    • Sakaue,  Hirotaka, “Anodized Aluminum Pressure Sensitive Paint for Unsteady Aerodynamic Applications,” PhD Dissertation, December 2003. Professor Sullivan
  • 1989
    • Sawyer,  Richard, “Measurement of Lift Development of Rapidly Accelerated Wings,” PhD Dissertation, May 1989. Professor Sullivan
  • 1988
    • Seal, II,  Michael, “An Experimental Study of Swirling Flows as Applied to Annular Combustors,” MS Thesis, May 1988. Professor Sullivan
  • 1985
    • Sundar,  R.M., “An Experimental Investigation of Propeller Wakes Using a Laser Doppler Velocimeter,” PhD Dissertation, May 1985. Professor Sullivan
  • 1981
    • Sundar,  R.M., “Performance of Wind Turbines in a Turbulent Atmosphere,” MS Thesis, May 1981. Professor Sullivan
  • 1997
    • Torgerson,  Shad, “Pressure Sensitive Paints for Aerodynamic Applications,” MS Thesis, August 1997. Professor Sullivan
  • 2001
    • Valentini,  Luiz, “Aft-Fuselage Modification of the Gulfstream IV,” MS Thesis, December 2001. Professor Sullivan
  • 1993
    • Vukits,  Thomas, “Low and High Speed STOVL Configurations in Ground Effect,” MS Thesis, May 1993. Professor Sullivan
  • 2004
    • Walters,  Leon, “Experimental Study of Diffusing S-Ducts,” MS Thesis, December 2004. Professor Sullivan
  • 1988
    • Witkowski,  David, “Experimental Investigation of Propeller - Wing Interaction,” MS Thesis, August 1988. Professor Sullivan
  • 1994
    • Young,  Steven, “Particle Image Velocimetry Applied to Flow in the Wake of a Flat Plate,” MS Thesis, August 1994. Professor Sullivan
  • 2009
    • Tapee,  John, “Experimental Aerodynamic Analysis of a Plug Nozzle for Supersonic Business Jet Application,” MS Thesis, August 2009. Professor Sullivan
    • Garibaldi,  Oscar, “Unmanned Aerial Platform for Atmospheric Flux Measurements,” MS Thesis, August 2009. Professor Sullivan
  • 2008
    • Selby,  Christopher, “High Altitude Airship Station Keeping and Launch Model Development Using Output from Numerical Weather Prediction Models,” MS Thesis, December 2008. Professor Sullivan
  • 2009
    • Jones,  Jesse, “Wind Tunnel Testing of a Supersonic Cruise Nozzle in Subsonic Ejector Configuration,” MS Thesis, May 2009. Professor Sullivan
  • 2007
    • Karni,  Etan, “Experimental Characterization of Opposed Oscillating Wings for a Hovering MAV,” MS Thesis, May 2007. Professor Sullivan
  • 2004
    • Smith,  Justin, “Qualification Testing and Fluorescent Imaging of Biobased Aviation Deicer Fluids,” MS Thesis, December 2004. Professor Sullivan
  • 1997
    • Vaidya,  Rajesh, “Failure Criterion for Notched Fiber Dominated Composite Laminates,” PhD Dissertation, May 1997. Professor Sun
  • 1993
    • Jiang,  Yi-Tsann, “Development of an Unstructured Solution Adaptive Method for the Quasi-Three-Dimensional Euler and Navier-Stoke Equations,” PhD Dissertation, May 1993. Professor Usab
  • 1991
    • Harrison, Jr.,  James, “Implicit Multigrid Acceleration of the Euler and Navier Stokes Equation,” MS Thesis, May 1991. Professor Usab
  • 1989
    • Jentink,  Thomas, “Formulation of Boundary Conditions for the Multigrid Acceleration of the Euler and Navier Skokes Equations,” MS Thesis, August 1989. Professor Usab
  • 2011
    • Madhav,  Ajay, “Efficacy of a Nonlinear Acoustic Model for Combustion Stability Prediction,” MS Thesis, May 2011. Professor W. Anderson
  • 2010
    • Nishida,  Erik, “Distinguishing Inertia Effects from the Intrinsic Mechanical Behavior of Soft Materials at High Strain Rates by Kolsky Bar Experiments,” MS Thesis, May 2010. Professor W. Chen
  • 1985
    • Zeiler,  Thomas, “An Approach to Integrated Aeroservoelastic Tailoring for Stability,” PhD Dissertation, August 1985. Professor Weisshaar
  • 1989
    • Blair,  Max, “Development and Application of the Time Domain Panel Method,” PhD Dissertation, December 1989. Professor Weisshaar
  • 1987
    • Bohlmann,  Jonathan, “Static Aeroelasticity of a Composite Oblique Wing,” MS Thesis, May 1987. Professor Weisshaar
  • 1999
    • Bowman,  Jason, “The Effects of Low-Observable Requirements on Tanker/Transport Aircraft,” MS Thesis, August 1999. Professor Weisshaar
  • 2000
    • Duke,  David, “Induced Drag Reduction Using Aeroelastic Tailoring and Adaptive Control Surfaces,” MS Thesis, May 2000. Professor Weisshaar
  • 1991
    • Ehlers,  Steven, “Aeroelastic Behavior of an Adaptive Lifting Surface,” PhD Dissertation, August 1991. Professor Weisshaar
  • 1982
    • Foist,  Brian, “Aeroelastic Stability of Aircraft with Advanced Composite Wings,” MS Thesis, August 1982. Professor Weisshaar
  • 2001
    • Henderson,  Joseph, “Formal Design Space Evaluation and Optimization for Innovative Aeroelastic Concepts,” MS Thesis, May 2001. Professor Weisshaar
  • 1992
    • Layton,  Jeffrey, “Multiobjective Control/Structure Design Optimization in the Presence of Practical Constraints,” PhD Dissertation, May 1992. Professor Weisshaar
  • 2002
    • Lee,  Dong-Hwan, “Aeroelastic Tailoring and Structural Optimization of Joined-Wing Configurations,” PhD Dissertation, August 2002. Professor Weisshaar
  • 1997
    • Leeks,  Tamara, “Active Aeroelastic Panels with Optimum Self-Straining Actuators,” PhD Dissertation, May 1997. Professor Weisshaar
  • 1993
    • Leeks,  Tamara, “Optimal Design of Partial-Plate Piezoelectric Actuators for Maximum Panel Deflection,” MS Thesis, December 1993. Professor Weisshaar
  • 1985
    • Miller,  Theron, “An Investigation of the Control Effectiveness of a Laminated Sweptback Wing,” MS Thesis, August 1985. Professor Weisshaar
  • 1994
    • Muller,  Mark, “Transonic Drag Reduction through the use of Induced Strain Actuators to Form an Adaptive Airfoil,” MS Thesis, May 1994. Professor Weisshaar
  • 1990
    • Nam,  Changho, “Aeroservoelastic Tailoring for Lateral Control Enhancement,” PhD Dissertation, May 1990. Professor Weisshaar
  • 1992
    • Paige,  Derek, “Composite Panel Flutter Suppression Using Piezoelectric Materials,” MS Thesis, May 1992. Professor Weisshaar
  • 1996
    • Peters,  Mark, “Development of a Light Unmanned Aircraft for the Determination of Flying Qualities Requirements,” MS Thesis, May 1996. Professor Weisshaar
  • 2002
    • Prock,  Brian, “Energy Based Design for Morphing Aircraft Wings,” MS Thesis, August 2002. Professor Weisshaar
  • 1993
    • Rodrigues,  Eduardo, “Linear and Nonlinear Discrete-Time State-Space Modeling of Dynamic Systems for Control Applications,” PhD Dissertation, December 1993. Professor Weisshaar
  • 1986
    • Sallee,  Vernon, “A Study of Integrated Structure and Control Design,” MS Thesis, December 1986. Professor Weisshaar
  • 1990
    • Scott,  Robert, “Control of Flutter Using Adaptive Materials,” MS Thesis, May 1990. Professor Weisshaar
  • 1982
    • Steele,  William, “Aeroelastic Stability of a Forward Swept Wing Aircraft with Wing Tip Stores,” MS Thesis, December 1982. Professor Weisshaar
    • Stukel,  Stephen, “Aeroelastic Tailoring for Passive Flutter Suppression,” MS Thesis, December 1982. Professor Weisshaar
  • 2000
    • Taylor,  Robert, “Aerospace Structural Design Process Improvement Using Systematic Evolutionary Structural Modeling,” PhD Dissertation, December 2000. Professor Weisshaar
  • 1988
    • Woods,  Jessica, “Dynamic Aeroelastic Stability of a Generic X-Wing Aircraft Configuration with Design Parameter Variations,” MS Thesis, August 1988. Professor Weisshaar
  • 1998
    • Yen,  Chih-Chieh, “Application of Parabolized Stability Equations to Jet Instabilities and the Associated Acoustic Radiation,” PhD Dissertation, December 1998. Professor Williams
  • 1989
    • Ayer,  Timothy, “Airfoil Wake Models for Unsteady Full Potential Applications,” MS Thesis, December 1989. Professor Williams
  • 1991
    • Caipen,  Terry, “Invariant Boundary Conditions for Cascade Flows,” PhD Dissertation, August 1991. Professor Williams
  • 1988
    • Cho,  Jinsoo, “Frequency Domain Aerodynamic Analysis of Interacting Rotating Systems,” PhD Dissertation, December 1988. Professor Williams
  • 1987
    • Chen,  Shih_Hsiung, “Panel Method for Counter Rotating Propellers,” PhD Dissertation, December 1987. Professor Williams
  • 1994
    • Dixon,  Vernon, “Vortex Dynamics in A Viscous Incompressible Fluid,” PhD Dissertation, August 1994. Professor Williams
  • 1985
    • Fuglsang,  Dennis, “Nonisentropic Unsteady Transonic Small Disturbance Theory,” MS Thesis, May 1985. Professor Williams
  • 1986
    • Gibbons,  Michael, “Nonisentropic Unsteady Three Dimensional Transonic Small Disturbance Potential Theory,” MS Thesis, May 1986. Professor Williams
  • 1992
    • Hooker,  John, “Spatial and Temporal Adaptive Procedures for the Unsteady Aerodynamic Analysis of Airfoils Using Unstructured Meshes,” PhD Dissertation, August 1992. Professor Williams
  • 1990
    • Hwang,  Ching-Chywan, “Propfan Supersonic Panel Method Analysis and Flutter Predictions,” PhD Dissertation, May 1990. Professor Williams
  • 1996
    • Huang,  Wen_liang, “Unsteady Aerodynamics of Advanced Ducted Fans,” PhD Dissertation, August 1996. Professor Williams
  • 1989
    • Kao,  Yung-Fu, “A Two-Dimensional Unsteady Analysis For Transonic and Supersonic Cascade Flow,” PhD Dissertation, May 1989. Professor Williams
  • 2001
    • Kim,  Haedong, “Computational Techniques for Blade-Vortex Interaction Prediction,” PhD Dissertation, August 2001. Professor Williams
  • 1990
    • Kleb,  William, “Temporal-Adaptive Euler/Navier-Stokes Algorithm For Unsteady Aerodynamic Analysis of Airfoils Using Triangular Meshes,” MS Thesis, May 1990. Professor Williams
  • 1989
    • Ku,  Chieh-Chang, “Three Dimensional Full Potential Method for the Aeroelastic Modeling of Propfans,” PhD Dissertation, December 1989. Professor Williams
  • 1987
    • Levine,  Mark, “Body-Conforming Grids for General Unsteady Airfoil Motion,” MS Thesis, August 1987. Professor Williams
  • 1991
    • Melville,  Reid, “A Non-Linear Vortex-Lattice Model for Leading-Edge Separation on a Prop-Fan Blade,” MS Thesis, December 1991. Professor Williams
  • 1988
    • Shin,  Bohyun, “The Development of Gortler Vortices in a Curved Duct,” PhD Dissertation, August 1988. Professor Williams
  • 1995
    • Smith,  Michael, “Simulating Flapping Insect Wings Using An Aerodynamic Panel Method: Towards The Development of Flapping-Wing Technology,” PhD Dissertation, August 1995. Professor Williams
  • 1992
    • Tan,  Jiak-Kwang, “Simulation of Vortex Bursting,” PhD Dissertation, August 1992. Professor Williams
  • 1988
    • Wu,  Yii-Cheng, “A Geometrically Nonlinear Tensorial Formulation of a Skewed Quadrilateral Thin Shell Finite Element,” PhD Dissertation, August 1988. Professor Yang
  • 1995
    • Ankireddi,  Seshasayee, “Passive and Active Control of Civil Structures Under Dynamic Wind Loads,” PhD Dissertation, May 1995. Professor Yang
  • 1983
    • Batina,  John, “Transonic Aeroelastic Stability and Response of Conventional and Supercritical Airfoils Including Active Controls,” PhD Dissertation, December 1983. Professor Yang
  • 1994
    • Berry,  Dale, “A Formulation and Experimental Verification for a Pneumatic Finite Element,” PhD Dissertation, August 1994. Professor Yang
  • 1985
    • Berry,  Howard, “Viscous Effects on Transonic Airfoil Stability and Response,” MS Thesis, May 1985. Professor Yang
    • Berry,  Dale, “Feedback Control, Large Amplitude Vibration, and Postbuckling of Space Lattice Beams using Simplified Finite Element Models,” MS Thesis, May 1985. Professor Yang
  • 1992
    • Chung,  Ilsup, “Inelastic Behavior of Thermoplastic Composites,” PhD Dissertation, August 1992. Professor Yang
  • 1990
    • Chen,  Chih-Tsai, “Geometrically Nonlinear Random Vibrations of Structures,” PhD Dissertation, May 1990. Professor Yang
  • 1986
    • Chen,  Alexander, “Formulation for Symmetrically Laminated Beam and Plate Finite Elements with Shear Deformation,” PhD Dissertation, December 1986. Professor Yang
  • 1989
    • Chang,  Chihchen, “Random Vibration of Uncertain Beam Structures with Geometrical Nonlinearity,” MS Thesis, May 1989. Professor Yang
  • 1982
    • Chang,  Yuan-Bin, “Linear Dynamic Analysis of Revolutional Shells Using Finite Elements and Modal Expansion,” PhD Dissertation, August 1982. Professor Yang
  • 1981
    • Day,  Michael, “A Mixed Variational Principle for Finite Element Analysis,” PhD Dissertation, May 1981. Professor Yang
  • 1994
    • Forster,  Edwin, “Flutter Control of Wing Boxes Using Piezoelectric Actuators,” MS Thesis, August 1994. Professor Yang
    • Fur,  Lih-Shing, “Vibration Control of Flexible Structures,” PhD Dissertation, August 1994. Professor Yang
  • 1986
    • Gallman,  John, “A Computational Transonic Flutter Boundary Tracking Procedure,” MS Thesis, May 1986. Professor Yang
  • 1980
    • Guruswamy,  P., “Aeroelastic Stability and Time Response Analysis of Conventional and Supercritical Airfoils in Transonic Flow by Time Integration Method,” PhD Dissertation, December 1980. Professor Yang
  • 1982
    • Han,  An-Dong, “Buckled Plate Vibrations, Large Amplitude Vibrations, and Nonlinear Flutter of Elastic Plates Using High-Order Triangular Finite Elements,” PhD Dissertation, December 1982. Professor Yang
  • 1993
    • He,  Chien-Cheng, “Three-Dimensional Finite Element Analysis of Free Edge Delamination in Composite Laminate,” MS Thesis, May 1993. Professor Yang
  • 1979
    • Hunckler,  Charles, “The Dynamic Behavior of an Automobile Tire,” PhD Dissertation, May 1979. Professor Yang
  • 1985
    • Kapania,  Rakesh, “Deterministic and Non-deterministic Response Analysis of Complex Shells,” PhD Dissertation, May 1985. Professor Yang
  • 1996
    • Kolonay,  Raymond, “Unsteady Aeroelastic Optimization in the Transonic Regime,” PhD Dissertation, December 1996. Professor Yang
  • 1985
    • Lamberson,  Steven, “Equivalent Continuum Finite Element Modelling of Plate-Like Space Lattice Structures,” PhD Dissertation, August 1985. Professor Yang
  • 1990
    • Liaw,  Der-Guang, “Reliability Study of Uncertain Structures Using Stochastic Finite Elements,” PhD Dissertation, December 1990. Professor Yang
  • 1987
    • Mohr,  Ross, “Effects of Mach Number and Wing Sweep on Transonic Aeroelastic Forces and Flutter Characteristics,” MS Thesis, December 1987. Professor Yang
  • 1983
    • Moore,  Carleton, “A New 48 D.O.F. Quadrilateral Shell Element with Variable-Order Polynomial and Rational B-Spline Geometries with Rigid Body Modes,” PhD Dissertation, December 1983. Professor Yang
  • 1995
    • Moulik,  Pradipta, “Simulation of Surface Grinding,” PhD Dissertation, May 1995. Professor Yang
  • 1989
    • Pidaparti,  Ramana, “Modeling and Fracture Prediction in Rubber Composites,” PhD Dissertation, August 1989. Professor Yang
    • Rausch,  Russ, “Euler Flutter Analysis of Airfoils Using Unstructured Dynamic Meshes,” MS Thesis, August 1989. Professor Yang
  • 1992
    • Rausch,  Russ, “Time-marching Aeroelastic and Spatial Adaptation Procedures on Triangular and Tetrahedral Meshes Using an Unstructured-grid Euler Method,” PhD Dissertation, December 1992. Professor Yang
  • 1985
    • Saigal,  Sunil, “Geometric and Material Nonlinear Dynamic Analysis of Complex Shells,” PhD Dissertation, December 1985. Professor Yang
  • 1991
    • Shih,  Albert, “Experimental and Finite Element Simulation Methods for Metal Forming and Cutting Processes,” PhD Dissertation, August 1991. Professor Yang
  • 1981
    • Striz,  Alfred, “Application of Harmonic Analysis Method to Aeroelastic Stability Analysis of Conventional and Supercritical Airfoils in Transonic Flow,” PhD Dissertation, August 1981. Professor Yang
  • 1976
    • Sung,  Shung-Hsing, “Finite Element Flutter Analysis of Flat Panels in Three-Dimensional Supersonic Unsteady Potential Flow,” PhD Dissertation, December 1976. Professor Yang
  • 1993
    • Wang,  Kuo-Feng, “Simulation of Quenching and Induction Heat Treatment Processes With Experimental Verification,” PhD Dissertation, August 1993. Professor Yang
  • 1989
    • Wanthal,  Steven, “Three-Dimensional Finite Element Formulations for Thick and Thin Laminated Plates,” PhD Dissertation, August 1989. Professor Yang
  • 1987
    • Wanthal,  Steven, “Formulation of Three Simple Triangular Plane Stress Anisotropic Finite Elements for a Microcomputer,” MS Thesis, December 1987. Professor Yang
  • 1992
    • Woodard,  Paul, “Grid Quality Assessment for Unstructured Triangular and Tetrahedral Meshes and Validation of an Upwind Implicit Euler Solution Algorithm,” MS Thesis, May 1992. Professor Yang
  • 1996
    • Woodard,  Paul, “Analysis of the Carburization and Quenching of Steels,” PhD Dissertation, May 1996. Professor Yang
  • 2000
    • Li,  Zhiyong, “Determination of Mechanical Properties Using Micro- and Nano-Indentation,” PhD Dissertation, December 2000. Professor Yang/Chandrasekar
  • 2003
    • Stein,  William, “A Theoretical Basis for Electrokinetic Propulsion,” MS Thesis, December 2003. Profssor Heister/Rusek
  • 2010
    • Steen,  Laura-cheri, “Characterization and Development of Nozzles for a Hypersonic Quiet Wind Tunnel,” MS Thesis, December 2010. S.Schneider
    • Dambach,  Erik, “Ignition of Hypergolic Propellants,” PhD Dissertation, December 2010. Stephen Heister
    • Gilbert,  Peter, “Effect of Tunnel Noise on Laminar Stagnation-Point Heating at Mach 6,” MS Thesis, December 2010. Steven Schneider
    • Ward,  Christopher, “Hypersonic Crossflow Instability and Transition on a Circular Cone at Angle of Attack,” MS Thesis, December 2010. Steven Schneider
  • 2011
    • Yan,  Allen, “Validation of Numerical Simulations for Nano-Aluminum Composite Solid Propellants,” MS Thesis, May 2011. Steven Son
  • 2010
    • Sanborn,  Brett, “An Experimental Inverstigation of Radial Deformation of Soft Materials in Kolsky Bar Experiments,” MS Thesis, December 2010. W. Chen
    • Pervin,  Farhana, “Dynamic Compressive Response of Soft Biological Tissues,” PhD Dissertation, December 2010. W. Chen
    • Kabir,  Md Enamul, “Dynamic Behavior of Granular Materials,” PhD Dissertation, December 2010. W. Chen