The Design for Additive Manufacturing Worksheet

by | Aug 3, 2017

Authors: Joran W. Booth, Jeffrey Alperovich, Pratik Chawla, Jiayan Ma, Tahira Reid, Karthik Ramani
Journal of Mechanical Design 139.10 (2017): 100904.
https://doi.org/10.1115/DETC2016-60407

Additive manufacturing (AM) technologies have become integral to modern prototyping and manufacturing. Therefore, guidelines for using AM are necessary to help users new to the technology. Many others have proposed useful guidelines, but these are rarely written in a way that is accessible to novice users. Most guidelines 1) assume the user has extensive prior knowledge of the process, 2) apply to only a few AM technologies or a very specific application, or 3) describe benefits of the technology that novices already know. In this paper, we present a 1-page, visual design-for-additive-manufacturing worksheet for novice and intermittent users which addresses common mistakes as identified by various expert machinists and additive manufacturing facilities who have worked extensively with novices. The worksheet helps designers assess the potential quality of a part made using most AM processes and indirectly suggests ways to redesign it. The immediate benefit of the worksheet is to filter out bad designs before they are printed, thus saving time on manufacturing and redesign. We implemented this as a go-no-go test for a high-volume AM facility where users are predominantly novices, and we observed an 81% decrease in the rate of poorly designed parts. We also tested the worksheet in a classroom , but found no difference between the control and the experimental groups. This result highlights the importance of motivation since the cost of using AM in this context was dramatically lower than real-world costs. This second result highlights the limitations of the worksheet.

 

sheet

Convergence Design Lab Admin

Convergence Design Lab Admin

Administrator of the Convergence Design Lab website.