Skip navigation
Laboratory for Sustainable Manufacturing

Journals (2000-2009)

2009
  • Haapala, K. R., J. L. Rivera, and J. W. Sutherland, “Reducing Environmental Impacts of Steel Product Manufacturing,” Trans. of NAMRI/SME, Vol. 37, 2009, pp. 419-426.
  • Huang, H., Z. Liu, L. Zhang, and J. W. Sutherland, “Materials Selection for Environmentally Conscious Design via a Proposed Life Cycle Environmental Performance Index,” International Journal of Advanced Manufacturing Technology, Vol. 44, 2009, pp. 1073–1082.
  • Hutchins, M. J. and J. W. Sutherland, “The Role of the Social Dimension in Life Cycle Engineering,” International Journal of Sustainable Manufacturing, Vol. 1, No. 3., 2009, pp. 238-250; also appeared in Proceedings of the 13th CIRP International Conference on Life Cycle Engineering, Leuven, Belgium, 2009, pp. 55-60.
  • Kumar, V., J. W. Sutherland, “Development and Assessment of Strategies to Ensure Economic Sustainability of the U.S. Automotive Recovery Infrastructure,” Resources, Conservation & Recycling, Vol. 53, No. 8, June 2009, pp. 470-477.
  • Sun, J., C. Ju, D. J. Michalek, and J. W. Sutherland, “Evaporation and Settling Behavior of Metalworking Fluid Aerosols,” Particulate Science and Technology: An International Journal, Vol. 27, No. 3, 2009, pp. 245-262.
2008
  • Haapala, K. R., J. L. Rivera, and J. W. Sutherland, “Application of Life Cycle Assessment Tools to Sustainable Product Design and Manufacturing,” International Journal of Innovative Computing, Information and Control, Special Issue on Recent Advances in Flexible Automation, Vol. 4, No. 3, 2008, pp. 577-591.
  • Haapala, K. R., K. L. Brown, and J. W. Sutherland, “A Life Cycle Environmental and Economic Comparison of Clothes Washing Product-Service Systems,” Trans. of NAMRI/SME, Vol. 36, 2008, pp. 333-340.
  • Sutherland, J. W., D. P. Adler, K. R. Haapala, and V. Kumar, “A Comparison of Manufacturing and Remanufacturing Energy Intensities with Application to Diesel Engine Production,” Annals of CIRP, Vol. 57, No. 1, 2008, pp. 5-8.
  • Kumar, V. and J. W. Sutherland, “Sustainability of the Automotive Recycling Infrastructure: Review of Current Research and Identification of Future Challenges,” International Journal of Sustainable Manufacturing, Vol. 1, Nos. 1/2, 2008, pp. 145-167.
  • Hutchins, M. J. and J. W. Sutherland, “An Exploration of Measures of Social Sustainability and Their Application to Supply Chain Decisions,” Journal of Cleaner Production, Vol. 16, No. 15, 2008, pp.1688-1698.
  • Ju, C., J. Sun, D. J. Michalek, and J. W. Sutherland, “Development of an Imaging System and Its Application in the Study of Cutting Fluid Atomization in a Turning Process,” Particulate Science and Technology: An International Journal, Vol. 26, No. 4, 2008, pp. 318-336.
2007
  • Huntzinger, D. N., M. J. Hutchins, J. S. Gierke, and J. W. Sutherland, “Enabling Sustainable Thinking in Undergraduate Engineering Education,” International Journal of Engineering Education, Vo. 23, No. 2, 2007, pp. 218-230.
  • Xue, H., V. Kumar, and J. W. Sutherland, “Material Flow and Environmental Impacts of Manufacturing Systems via Aggregated Input-Output Models,” Journal of Cleaner Production, Vol. 15, No. 13-14, 2007, pp. 1349-1358.
  • Sutherland, J. W. and K. R. Haapala, “Optimization of Steel Production to Improve Lifecycle Environmental Performance,” Annals of CIRP, Vol. 56, No. 1, 2007, pp. 5-8.
  • Kumar, V. and J. W. Sutherland, “Infrastructure Changes Required to Achieve Higher Material Recovery Targets from End-of-Use Vehicles,” Trans. of NAMRI/SME, Vol. 35, 2007, pp. 201-208. 
  • Kumar, V., P. S. Shirodkar, J. A. Camelio, and J. W. Sutherland, “Value Flow Characterization During Product Lifecycle to Assist in Recovery Decisions,” International Journal of Production Research, Vol. 45, No. 18, 2007, pp. 4555-4572.
  • Filipovic, A. J. and J. W. Sutherland, “Assessing the Performance of a Magnetostrictive-Actuated Tool Holder to Achieve Axial Modulations with Application to Dry Deep Hole Drilling,” Journal of Manufacturing Processes, Vol. 9, No. 2, 2007, pp. 75-86.
  • Huang, J., K. Kalaitzidou, J. W. Sutherland, and E. C. Aifantis, “Validation of a Predictive Model for Adiabatic Shear Band Formation in Chips Produced via Orthogonal Machining,” J. Mech. Behaviour of Materials, Vol. 18, No. 4, 2007, pp. 243-263.
2006
  • Adler, D. P., W. W.-S. Hii, D. J. Michalek, and J. W. Sutherland, “Examining the Role of Cutting Fluids in Machining and Efforts to Address Associated Environmental/Health Concerns,” Machining Science and Technology, Vol. 10, No. 1, 2006, pp. 23-58.
  • Zheng, Y., X. Hu, and J. W. Sutherland, “Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model, Part 1: Model Development,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 128, No. 3, August 2006, pp. 760-766.
  • Zheng, Y., X. Hu, and J. W. Sutherland, “Application of Finite Deformation Theory to the Development of an Orthogonal Cutting Model, Part 2: Experimental Investigation and Model Validation,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 128, No. 3, August 2006, pp. 767-774.
  • Kumar, V., K. R. Haapala, J. L. Rivera, M. J. Hutchins, W. J. Endres, J. K. Gershenson, D. J. Michalek, and J. W. Sutherland, “Infusing Sustainability Principles into Manufacturing/Mechanical Engineering Curricula,” SME Journal of Manufacturing Systems, Vo. 24, No. 3, 2006, pp. 215-225.
2005
  • Gutowski, T., C. Murphy, D. Allen, D. Bauer, B. Bras, T. Piwonka, P. Sheng, J. Sutherland, D. Thurston, and E. Wolff, “Environmentally Benign Manufacturing: Observations from Japan, Europe and the United States,” Journal of Cleaner Production, Vol. 13, January 2005, pp. 1-17.
  • Filipovic, A. J., and J. W. Sutherland, “Development of a Magnetostrictive-Actuated Tool Holder for Dry Deep Hole Drilling,” Transactions of NAMRI/SME, Vol. 33, 2005, pp. 437-444.
  • Dasch, J., J. D’Arcy, A. Gundrum, J. Sutherland, J. Johnson, and D. Carlson, “Characterization of Fine Particles from Machining in Automotive Plants,” J. of Occupational and Environmental Hygiene, Vol. 2, No. 12, December 2005, pp. 609-625.
2004
  • Bandivadekar, A.P., V. Kumar, K. L. Gunter, J. W. Sutherland, “A Model for Material Flows and Economic Exchanges within the U.S. Automotive Life Cycle Chain,” Transactions of NAMRI/SME, Vol. 32, 2004, pp. 303-310, also appeared in SME Journal of Manufacturing System, Vol. 23, No. 1, 2004, pp. 22-29.
  • Sutherland, J., K. Gunter, D. Allen, D. Bauer, B. Bras, T. Gutowski, C. Murphy, T. Piwonka, P. Sheng, D. Thurston, E. Wolff, “A Global Perspective on the Environmental Challenges Facing the Automotive Industry: State-of-the-Art and Directions for the Future,” International Journal of Vehicle Design, Vol. 35, Nos. 1/2, 2004, pp. 86-110.
  • Weinert, K., I. Inasaki, J. W. Sutherland, and T. Wakabayashi, “Dry Machining and Minimum Quantity Lubrication,” Annals of CIRP, Vol. 53, No. 2, 2004, pp. 511-537.
  • Yue, Y., J. Sun, K. L. Gunter, D. J. Michalek, and J. W. Sutherland, “Character and Behavior of Mist Generated by Application of Cutting Fluid to a Rotating Cylindrical Workpiece, Part 1: Model Development,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 126, No. 3, August 2004, pp. 417-425.
  • Sun, J., C. Ju, Y. Yue, K. L. Gunter, D. J. Michalek, and J. W. Sutherland, “Character and Behavior of Mist Generated by Application of Cutting Fluid to a Rotating Cylindrical Workpiece, Part 2: Experimental Validation,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 126, No. 3, August 2004, pp. 426-434.
2003
  • Behm, S. U., K. L. Gunter, and J. W. Sutherland, “An Investigation into the Effect of Process Parameter Settings on Air Emission Characteristics in the Lost Foam Casting Process,” AFS Transactions, 2003, Paper #03-031, appeared on CD-ROM.
  • Sutherland, J. W., K. L. Gunter, K. R. Haapala, K. Khadke, S. J. Skerlos, J. B. Zimmerman, W. W. Olson, and R. Sadasivuni, “Environmentally Benign Manufacturing: Status and Vision for the Future,” Transactions of NAMRI/SME, 2003, pp. 345-352, also appeared as SME Paper MR03-188.
  • Michalek, D. J., W. W. S. Hii, J. Sun, K. L. Gunter, and J. W. Sutherland, “Experimental and Analytical Efforts to Characterize Cutting Fluid Mist Formation and Behavior in Machining,” Applied Occupational and Environmental Hygiene, Vol. 18, No. 11, 2003, pp. 842-854.
  • Mihelcic, J. R., J. C. Crittenden, M. J. Small, D. R. Shonnard, D. R. Hokanson, Q. Zhang, H. Chen, S. A. Sorby, V. U. James, J. W. Sutherland, and J. L. Schnoor, “Sustainability Science and Engineering: The Emergence of a New Metadiscipline,” Environmental Science & Technology, Vol. 37, No. 23, 2003, pp. 5314-5324.
2002
  • Cao, T., and J. W. Sutherland, “Investigation of Thread Tapping Load Characteristics through Mechanistic Modeling and Experimentation,” International Journal of Machine Tools and Manufacture, Vol. 42, No. 14, November 2002, pp. 1527-1538.
  • Chan, W., K. L. Gunter, and J. W. Sutherland, “An Experimental Study of the Fume Particulate Produced by the Shielded Metal Arc Welding Process,” Transactions of NAMRI/SME, Vol. 30, 2002, pp. 581-588, also appeared as SME Technical Paper, No. MS02-201.
  • Li, K., X. L. Gao, and J. W. Sutherland, “Finite Element Simulation of the Orthogonal Metal Cutting Process for Qualitative Understanding of the Effects of Crater Wear on the Chip Formation Process,” Journal of Materials Processing Technology, Vol. 127, No. 3, 2002, pp. 309-324.
  • Ranganath, S., and J. W. Sutherland, “An Improved Method for Cutter Runout Modeling in the Peripheral Milling Process,” Machining Science and Technology, Vol. 6, No. 1, 2002, pp. 1-20.
  • Sutherland, J. W., and K. L. Gunter, “A Model for Improving Economic Performance of a Demanufacturing System for Reduced Product End-of-Life Environmental Impact,” submitted by K. J. Weinmann, Annals of CIRP, Vol. 51/1, 2002, pp. 45-48.
2001
  • Batzer, S. A., and J. W. Sutherland, “A Geometric Analysis of Semi-spiral Chip Morphology in Orthogonal Machining,” Machining Science and Technology, Vol. 5, No. 1, 2001, pp. 63-76.
  • Eppert, J. J., K. L. Gunter, and J. W. Sutherland, “Development of a Cutting Fluid Classification System Using Cluster Analysis,” Tribology Transactions, Vol. 44, No. 3, 2001, pp. 375-382.
  • Li, J., and J. W. Sutherland, “Multi-Channel Dynamic Data Collecting System of Rotors,” Journal of Modelling, Measurement & Control, Series B, Vol. 70, No. 4, 2001, pp. 1-10.
  • Li, J., X. Zhang, and J. W. Sutherland, “Identification of Gear Transmission System Dynamics; Part I: Model Development,” Journal of Advances in Modelling & Analysis, Series C, Vol. 56, No. 1, 2001, pp. 1- 12.
  • Shen, G., A. Gandhi, O. Arici, and J. W. Sutherland, “A Model for Workpiece Temperatures During Peripheral Milling Including the Effect of Cutting Fluids,” Trans. of NAMRI/SME, Vol. 29, May 2001, pp. 265-272, also appeared as SME Technical Paper, No. MR01-269, 2001.
  • Salisbury, E. J., K. V. Domala, K. S. Moon, M. H. Miller, and J. W. Sutherland, “A Three-Dimensional Model for the Surface Texture in Surface Grinding, Part I: Surface Generation Model,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 123, November 2001, pp. 576-581.
  • Salisbury, E. J., K. V. Domala, K. S. Moon, M. H. Miller, and J. W. Sutherland, “A Three-Dimensional Model for the Surface Texture in Surface Grinding, Part II: Grinding Wheel Surface Texture Model,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 123, November 2001, pp. 582-590.
  • Siow, Y. K., S. L. Yang, and J. W. Sutherland, “Analysis of Cutting Fluid Jet Impingement on a Flat Surface via Computational Fluid Dynamics,” Intl. Jour. for Mfg. Sci. and Technology, Vol. 2, No. 2, 2001, pp. 143-152.
  • Allen, D., D. Bauer, B. Bras, T. Gutowski, C. Murphy, T. Piwonka, P. Sheng, J. Sutherland, D. Thurston, and E. Wolff, “Environmentally Benign Manufacturing: Trends In Europe, Japan and the USA,” J. of Manf. Sci. and Engr., Trans ASME, Vol. 124, No. 4, November 2002, pp. 908-920, originally appeared in Proc. of ASME DETC: Design Engineering Technical Conference, Pittsburgh, PA, September 2001, pp. 425-442.
2000
  • Bergstrom, A., A. Filipovic, W. W. Olson, and J. W. Sutherland, “Mechanistic Prediction of Drilling Forces Incorporating a Minimum Cutting Energy Model for Chip Flow Angle,” Trans. of NAMRI/SME, Vol. 28, May 2000, pp. 143-148, also appeared as SME Technical Paper No. MR00-193, 2000.
  • Zheng, Y., H. Li, W. W. Olson, and J. W. Sutherland, “Evaluating Cutting Fluid Effects on Cylinder Boring Surface Errors by Inverse Heat Transfer and Finite Element Methods,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 122, No. 3, August 2000, pp. 377-383.
  • Sutherland, J. W., V. N. Kulur, and N. C. King (submitted by B. F. Von Turkovich), “An Experimental Investigation of Air Quality in Wet and Dry Turning,” Annals of CIRP, Vol. 49/1, August 2000, pp. 61-64.
  • Li, J., and J. W. Sutherland, “Multi-Channel Data Transmission System for Rotating Elements Using a Non-Contacting Slip Ring,” Review of Scientific Instruments, Vol. 71, No. 11, November 2000, pp. 4319 - 4322.
  • Li, J., F. Liu, and J. W. Sutherland, “Identification of Gear Transmission System Dynamics. Part II: Model Validation,” Journal of Advances in Modelling & Analysis, Series C, Vol. 55, No. 4, 2000, pp. 1-12.
 
Google Scholar Icon
 


 

See Professor Sutherland's full CV for a complete list of all other publications