Skip navigation
Laboratory for Sustainable Manufacturing

Journals (1986-1999)

1999
  • Daniel, C. M., W. W. Olson, and J. W. Sutherland, “Research Advances in Dry and Semi-Dry Machining,” SAE Technical Paper No. 970415, also in the SAE Trans., J. of Materials and Manufacturing, Vol. 106, 1999 pp. 373-383.
  • Milacic, D., H. A. Gowaikar, W. W. Olson, and J. W. Sutherland, “A Proposed LCA Model of Environmental Effects with Markovian Decision Making,” SAE Technical Paper No. 971174, also in the SAE Trans., J. of Passenger Cars, Vol. 106, 1999, pp. 2174-2181.
  • Gunter, K. L. and J. W. Sutherland, “An Experimental Investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning,” Journal of Cleaner Production, Vol. 7, No. 5, 1999, pp. 341-350.
  • Yue, Y., K. L. Gunter, D. J. Michalek, and J. W. Sutherland, “An Examination of Cutting Fluid Mist Formation in Machining,” Trans. of NAMRI/SME, Vol. 27, May 1999, pp. 221-226, also appeared as SME Technical Paper No. MS99-180, 1999.
  • Cozzens, D. A., P. D. Rao, W. W. Olson, J. W. Sutherland, and J. M. Panetta, “An Experimental Investigation into the Effect of Cutting Fluid Conditions on the Boring of Aluminum Alloys,” J. of Mfg. Sci. & Engr., Trans. ASME, Vol. 121, No. 3, August 1999, pp. 434-439.
  • Melkote, S. N., J. W. Sutherland, and C. King, “The Effect of Tool Flexibility on Back-Cutting in End Milled Surfaces,” J. of Mfg. Sci. & Engr., Trans. ASME, Vol. 121, No. 3, August 1999, pp. 532-537.
  • Ranganath, S., K. Narayanan, and J. W. Sutherland, “The Role of Flank Face Interference in Improving the Accuracy of Dynamic Force Predictions in Peripheral Milling,” J. of Manf. Sci. and Engr., Trans. ASME, Vol. 121, No. 4, November 1999, pp. 593-599.
  • Sutherland, J. W., T. Cao, A. Gandhi, P. Sheng, D. Bauer, R. E. DeVor, S. G. Kapoor, and S. Skerlos, “Web-Based Cutting Fluid Evaluation Software,” Proceedings of 31st CIRP International Seminar on Manufacturing Systems, May 1998, Berkeley, CA, pp. 501-505, also appeared in CIRP Journal of Manufacturing Systems, Vol. 29, No. 6, 1999, pp. 517-521.
1998
  • Wentland, C. J., N. Soni, W. W. Olson, and J. W. Sutherland, “Development and Application of a Reprocessability Index System for Discrete Rotational Parts,” Engineering Design and Automation, Vol. 4, No. 1, 1998, pp. 47-55.
  • Wang, Y., G. Zhang, K. S. Moon, and J. W. Sutherland, “Compensation for the Thermal Error of a Multi-axis Machining Center,” Journal of Matls. Processing Tech., Vol. 75/1-3, March 1998, pp. 45-53.
  • Ranganath S., D. Liu, and J. W. Sutherland, “A Comprehensive Model for the Flank Face Interference Mechanism in Peripheral Milling,” Trans. of NAMRI/SME, Vol. 26, May 1998, pp. 249-254.
  • Daniel, C. M., W. W. Olson, and J. W. Sutherland, “Modeling the Effects of Component Level Geometric and Form Deviations on Machine Tool Slideway Errors,” Trans. of NAMRI/SME, Vol. 26, May 1998, pp. 347-352, also appeared as SME Technical Paper No. MS98-266, 1998.
  • Liu, D., J. W. Sutherland, K. S. Moon, T. J. Sturos, and A. R. Kashani, “Surface Texture Improvement in the Turning Process via Application of a Magnetostrictively Actuated Tool Holder,” Trans. ASME, J. of Dyn. Sys., Meas., and Control, Vol. 120, June 1998, pp. 193-199.
  • Batzer, S. A., D. M. Haan, P. D. Rao, W. W. Olson, and J. W. Sutherland, “Chip Morphology and Hole Texture in the Drilling of Cast Aluminum Alloys,” Journal of Matls. Processing Tech., Vol. 79/1-3, July 1998, pp. 72-78.
1997
  • Sutherland, J. W., T. Cao, C. M. Daniel, Y. Yue, Y. Zheng, P. Sheng, D. Bauer, M. Srinivasan, R. E. DeVor, S. G. Kapoor, and S. Skerlos, “CFEST: An Internet-Based Cutting Fluid Evaluation Software Testbed,” Trans. of NAMRI/SME, Vol. 25, May 1997, pp. 243-248.
  • Batzer, S. A., J. W. Sutherland, and W. W. Olson, “Chip Morphology and Bending Moment Models for Orthogonal Machining with Flat Faced Tools,” Trans. of NAMRI/SME, Vol. 25, May 1997, pp. 231-236.
  • Sutherland, J. W., E. J. Salisbury, and F. W. Hoge, “A Model for the Cutting Force System in the Gear Broaching Process,” Int. J. of Mach. Tools and Manufacture, Vol. 37, No. 10, 1997, pp. 1409-1421.
  • Haan, D. M., S. A. Batzer, W. W. Olson, and J. W. Sutherland, “An Experimental Study of Cutting Fluid Effects in Drilling,” Journal of Matls. Processing Tech., Vol. 71/2, November 1997, pp. 305-313.
1996
  • Zheng, Y., J. W. Sutherland, and W. W. Olson, “A Predictive Heat Generation Model in Orthogonal Cutting Visco-Plastic Material,” Journal of the Mechanical Behavior of Materials, Vol. 6, No. 3, 1996, pp. 245-261.
  • Philipps, K, W. W. Olson, and J. W. Sutherland, “Shearing of Automotive Grade Polypropylene and Acrylonitrile-Butadiene Styrene to Facilitate Recycling,” Trans. of NAMRI/SME, Vol. 24, May 1996, pp. 217-222.
  • Huang, J., W. W. Olson, J. W. Sutherland, and E. C. Aifantis, “On the Shear Instability in Chip Formation in Orthogonal Machining,” Journal of the Mechanical Behavior of Materials, Vol. 7, No. 4, 1996, pp. 279-292.
1995
  • Matulis, R. J., F. K. McKeith, J. W. Sutherland, and M. S. Brewer, “Sensory Characteristics of Frankfurters as Affected by Fat, Salt, and pH,” J. of Food Science, Vol. 60, No. 1, 1995, pp. 42-47.
  • Matulis, R. J., F. K. McKeith, J. W. Sutherland, and M. S. Brewer, “Sensory Characteristics of Frankfurters as Affected by Salt, Fat, Soy Protein, and Carrageenan,” J. of Food Science, Vol. 60, No. 1, 1995, pp. 48-54.
  • Savage, W. D, L. S. Wei, J. W. Sutherland, and S. J. Schmidt, “Biologically Active Components Inactivation and Protein Insolubilization during Heat Processing of Soybeans,” J. of Food Science, Vol. 60, No. 1, 1995, pp. 164-168, 180.
  • Salisbury, E. J., K. S. Moon, and J. W. Sutherland, “Development of a Microscopic Laser Interferometry System for Precision Surface Measurement,” J. Eng. for Ind., Trans. ASME, Vol. 117, November 1995, pp. 619-624, also in Contact Problems and Surface Interaction in Manufacturing and Tribological Systems, ASME Bound Volume - PED Vol. 67, December 1993, pp. 333-341, authors: K. S. Moon, E. J. Salisbury, and J. W. Sutherland.
  • Salisbury, E. J., K. S. Moon, and J. W. Sutherland, “Phase Shift Estimation: A Method for Improving the Accuracy of Phase Shift Interferometers,” Trans. of NAMRI/SME, Vol. 23, May 1995, pp. 345-350.
1994
  • Vadrevu, S., K. Philipps, J. W. Sutherland, and W. W. Olson, “Loss Function Modeling of Time Varying Quality Characteristics,” Trans. of NAMRI/SME, Vol. 22, May 1994, pp. 343‑349.
  • Runola, J. P., K. S. Moon, and J. W. Sutherland, “The Effect of Tool Wear on the Wavelength Structure of a Turned Surface Profile,” Trans. of NAMRI/SME, Vol. 22, May 1994, pp. 105-109.
1993
  • Michler, J. R., K. S. Moon, J. W. Sutherland, and A. R. Kashani, “Development of a Cutting Tool Micropositioner,” Trans. of NAMRI/SME, Vol. 21, May 1993, pp. 421-427.
  • Kashani, A. R., J. W. Sutherland, K. S. Moon, and J. R. Michler, “A Robust Control Scheme for Improved Machined Surface Texture,” Trans. of NAMRI/SME, Vol. 21, May 1993, pp. 429-434.
  • Olson, W. W. and J. W. Sutherland, “Research Issues in Demanufacturing,” Trans. of NAMRI/SME, Vol. 21, May 1993, pp. 443-450.
  • Moon, K. S. and J. W. Sutherland, “The Origin and Interpretation of Spatial Frequencies in a Turned Surface Profile,” J. of Engineering for Industry, Trans. ASME, Vol. 116, No. 3, August 1994, pp. 340‑347, also in Contact Problems and Surface Interaction in Manufacturing and Tribological Systems, ASME Bound Volume - PED Vol. 67, December 1993, pp. 343-351.
1992
  • Sutherland, J. W., and K. S. Moon, “Procrustes Analysis and its Application to Sensor Integration,” Trans. of NAMRI/SME, Vol. 20, May 1992, pp. 347-354.
  • Sutherland, J. W., and W. J. Zdeblick, “Modeling the Thread Chasing Process for Improved Product Quality,” Soc. of Automotive Engrs. Technical Paper No. 920919, also in the SAE Trans., J. of Materials and Manufacturing, Vol. 101, No. 5, 1992, pp. 711-719.
  • Mistry, A. H., S. J. Schmidt, S. R. Eckhoff, and J. W. Sutherland, “Alkali Extraction of Starch from Corn Flour,” Starch/Stärke, Vol. 44, 1992, pp. 284-288.
1990
  • Lin, S. C., R. E. DeVor, S. G. Kapoor, and J. W. Sutherland, “A New Approach to Estimating Cutting Process Damping Under Working Conditions,” Trans. of NAMRI/SME, Vol. 18, May 1990, pp. 154-160.
1989
  • Sutherland, J. W., D. J. O’Brien, and M. S. Wagner, “An Algorithm for the Detection of Flute Breakage in a Peripheral End Milling Process,” Trans. of NAMRI/SME, Vol. 17, May 1989, pp. 144-151.
1988
  • Sutherland, J. W., R. E. DeVor, S. G. Kapoor, and P. M. Ferreira, “Machining Process Models for Product and Process Design,” Soc. of Automotive Engrs. Technical Paper No. 880793, also in SAE Trans., Vol. 97, No. 5, 1988, pp. 215-226.
1987
  • Richardson, S. J., M. P. Steinberg, R. E. DeVor, and J. W. Sutherland, “Characterization of the Oxygen-17 Nuclear Magnetic Resonance Water Mobility Response Surface,” J. of Food Science, Vol. 52, No. 1, 1987, pp. 189-193.
1986
  • Sutherland, J. W., and R. E. DeVor, “Error Prediction in Flexible End Milling Systems,” J. of Engineering for Industry, Trans. ASME, Vol. 108, No. 4, November 1986, pp. 269-279.
 
Google Scholar Icon
 


 

See Professor Sutherland's full CV for a complete list of all other publications