Maha Fluid Power Research Center
 

Monika Ivantysynova's Publications

Books

  1. Ivantysyn, J. und Ivantysynova, M. 1993. Hydrostatische Pumpen und Motoren. Würzburg. Vogel Buchverlag.
  2. Ivantysyn, J. and Ivantysynova, M. 2001. Hydrostatic Pumps and Motors, Principles, Designs, Performance, Modelling, Analysis, Control and Testing. New Delhi. Academia Books International, ISBN -81-85522-16-2.

Journal Papers


Monika Ivantysynova (1955-2018)
  1. Ivantysyn, J. and Berge, M. 1981. Druckfeld im Ölfilm eines ringförmigen Spaltes veränderlicher Höhe (slow.). Hydraulika 8 (1981) 2, pp. 2 -5
  2. Berge, M. and Ivantysyn, J. 1981. Druckfeld im Ölfilm zwischen Kolben und Zylinder in Axialkolbenmaschinen (slow.). Hydraulika 8 (1981) 2, pp. 6 -10.
  3. Ivantysynova, M. 1985. Temperaturmessung in engen Spalten hydrostatischer Maschinen (slow.). Hydraulika 46 (1985), pp.19 -21.
  4. Ivantysynova, M. 1986. Nichtisotherme Strömung im Spalt hydrostatischer Maschinen (slow.). Hydraulika 48 (1986), pp.16 - 21.
  5. Ivantysynova, M. 1985. Temperaturfeld im Schmierspalt zwischen Kolben und Zylinder einer Axialkolbenmaschine. Maschinenbautechnik 34 (1985) 12, pp. 532 - 535.
  6. Ivantysynova, M. 1988. Theoretische und experimentelle Untersuchungen zu einem neuen Kolbentyp für Axialkolbenmaschinen. Schmierungstechnik 1988, vol. 19, num. 6, pp. 170-173.
  7. Ivantysynova, M. 1990. Automatisierung der Meßwerterfassung und -auswertung mit dem PC im Maschinenbau (slow.). Strojírenská Vyroba 4 (1990), pp. 7 - 10.
  8. Ivantysynova, M. 1994. Flugzeug-Systemtechnik an der Technischen Universität Hamburg-Harburg. O+P Ölhydraulik und Pneumatik 38 (1994) 5, pp. 262 - 269.
  9. Ivantysynova, M. and Berg, H. 1999. Design and testing of a robust linear controller for secondary controlled hydraulic drive. Journal of Systems and Control Enginering. Special Issue: Control in Fluid Power Systems. Proc. Instn Mech Engrs Vol. 213 Part I, pp. 375-386.
  10. Berg, H. and Ivantysynova, M. 1999. Robuste Drehzahl- und Drehwinkelregelung verstellbarer Hydromotoren am Konstantdrucknetz. O+P Ölhydraulik und Pneumatik 43 (1999) 5, pp. 405 - 410.
  11. Ivantysynova, M. and Lasaar, R. 2000. Ein Versuchsträger zur Messung der Reibkräfte zwischen Kolben und Zylinder in Axialkolbenmaschinen. Konstruktion 52 (2000) 6, pp. 57 - 65.
  12. Olems, L. 2000. Investigations of the Temperature Behaviour of the Piston Cylinder Assembly in Axial Piston Pumps. International Journal of Fluid Power, Vol. 1 (2000), No.1, pp. 27-38.
  13. Wieczorek, U. and Ivantysynova, M. 2002. Computer Aided Optimization of Bearing and Sealing Gaps in Hydrostatic Machines - The Simulation Tool CASPAR. International Journal of Fluid Power, Vol. 3 (2002), No.1, pp. 7-20.
  14. Ivantysynova, M. et al. 2003. Der hartgedrehte Kolben für Schrägscheibenmaschinen. O+P Ölhydraulik und Pneumatik 47 (2003), No. 2, pp. 102-107.
  15. Ivantysynova, M. and Lasaar, R. 2004. An investigation into Micro- and macro geometric design of piston/cylinder assembly of swash plate machines. International Journal of Fluid Power, Vol. 5 (2004), No.1 , pp. 23-36.
  16. Ivantysynova, M. 2004. EHD-based simulation model for connected tribosystems of displacemnt machines. (in German). Tribologie und Schmierungstechnik, 51 (2004), No. 5, pp. 18-24.
  17. Rahmfeld, R. and Ivantysynova, M. 2004. An overview about active oscillation damping of mobile machine structure. International Journal of Fluid Power, Vol. 5 (2004), No. 2, pp. 5-24.
  18. Grabbel, J. and Ivantysynova, M. 2005. An investigation of swash plate control concepts for displacement controlled actuators.International Journal of Fluid Power, Vol. 6 (2005), No. 2, pp.19-36. online version
  19. Hilaire, A. St. , Ossyra J.C. and Ivantysynova, M. 2006. Pump controlled active roll stabilizer. International Journal of Fluid Power, Vol. 7 (2006), No.1 March 2006. pp. 27- 40.
  20. Seeniraj, G. and Ivantysynova, M. 2008. Multi-objective Optimization Tool for Noise Reduction in Axial Piston Machines. SAE International Journal of Commercial Vehicles.1(1):544-552, 2008 - The Most Outstanding SAE Technical Papers of 2008
  21. Ivantysynova, M. and Baker, J. 2009. Power Loss in the Lubricating Gap Between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines. International Journal of Fluid Power, Vol. 10, No. 2, pp. 29-43.
  22. Williamson, C. , Lee S. and Ivantysynova, M. 2009. Active Vibration Damping for an Off-Road Vehicle with Displacement Controlled Actuators. International Journal of Fluid Power, Vol. 10, No. 3, pp. 5-16.
  23. Vacca, A. , Klop R. and Ivantysynova, M. 2010. A Numerical Approach for The Evaluation of The Effects of Air Release And Vapour Cavitation on Effective Flow Rate of Axial Piston Machines International Journal of Fluid Power, Vol. 11, No. 1, pp. 33-46.
  24. Seeniraj, G. and Ivantysynova, M. 2011. A Multi-Parameter Multi-Objective Approach to Reduce Pump Noise Generation. International Journal of Fluid Power, Vol. 12, No. 1, pp. 7-17.
  25. Kumar, R. and Ivantysynova, M. 2011. An Instantaneous Optimization Based Power Management Strategy to Reduce Fuel Consumption in Hydraulic Hybrids. International Journal of Fluid Power, Vol. 12, No. 2, pp. 15-25.
  26. Seeniraj, G. K., Zhao, M. and Ivantysynova, M. 2011. Effect of Combining Precompression Grooves, PCFV and DCFV on Pump Noise Generation. International Journal of Fluid Power, Vol. 12, No. 3, pp. 53-64.
  27. Klop, R. and Ivantysynova, M. 2011. Investigation of Noise Sources on a Series Hybrid Transmission. International Journal of Fluid Power, Vol. 12, No. 3, pp. 17-30.
  28. Pelosi, M. and Ivantysynova, M. 2012. A Geometric Multigrid Solver for the Piston-Cylinder Interface of Axial Piston Machines. Tribology Transactions, Vol. 55, Issue. 2, pp. 163-174.
  29. Pelosi, M. and Ivantysynova, M. 2012. Heat Transfer and Thermal Elastic Deformation Analysis on the Piston/Cylinder Interface of Axial Piston Machines. Transaction of the ASME, Journal of Tribology, Vol. 134, October 2012, pp. 1-15.
  30. Busquets, E. and Ivantysynova, M. 2013. Temperature Prediction of Displacement Controlled Multi-Actuator Machines. International Journal of Fluid Power. Vol. 14, No. 1, pp. 25-36, doi:10.1080/14399776.2013.10781066. online version
  31. Pelosi, M. and Ivantysynova, M. 2013. The Impact of Axial Piston Machines Mechanical Parts Constraint Conditions on the Thermo-Elastohydrodynamic Lubrication Analysis of the Fluid Film Interfaces. International Journal of Fluid Power, Vol. 14, No. 3, pp. 35-51
  32. Daher, N. and Ivantysynova, M. 2014. An Indirect Adaptive Velocity Controller for a Novel Steer-by-Wire System. ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 136, Issue 5, pp. 051012-1-9, online version
  33. Daher, N. and Ivantysynova, M. 2014. A Virtual Yaw Rate Sensor for Articulated Vehicles Featuring Novel Electro-Hydraulic Steer-by-Wire Technology. Control Engineering Practice, Vol. 30, pp. 45-54, online version
  34. Daher, N. and Ivantysynova, M. 2014. Energy Analysis of an Original Steering Technology that Saves Fuel and Boosts Efficiency. Energy Conversion and Management, Vol. 86, pp. 1059-1068 online version
  35. Kim, T., Kalbfleisch, P., and Ivantysynova, M. 2014. The effect of cross porting on derived displacement volume. International Journal of Fluid Power, Vol. 15, Issue 2, pp. 77-85, doi:10.1080/14399776.2014.923605. online version
  36. Schenk, A. and Ivantysynova, M. 2015. A transient thermoelastohydrodynamic lubrication model for the slipper / swashplate in axial piston machines. Transaction of the ASME, Journal of Tribology, July 2015, Vol. 137, 031701-1-10, doi:10.1115/1.4029674. online version
  37. Shang, L. and Ivantysynova, M. 2015. Port and case flow temperature prediction for axial piston machines. International Journal of Fluid Power, Vol. 16, Issue 1, pp.35-51 online version
  38. Busquets, E. and Ivantysynova, M. 2015. Discontinuous Projection-Based Adaptive Robust Control for Displacement-Controlled Actuators. ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 137, No. 8, pp. 081007-1-10. doi:10.1115/1.4030064. online version
  39. Busquets, E. and Ivantysynova, M. 2015. A Multi-Actuator Displacement-Controlled System with Pump Switching - A Study of the Architecture and Actuator-Level Control. Transactions of the Japanese Fluid Power System Society, Vol. 8, No. 2, pp. 66-75. online version
  40. Daher, N. and Ivantysynova, M. 2015. Yaw stability control of articulated frame off-highway vehicles via displacement controlled steer-by-wire. Control Engineering Practice, Vol. 45, pp. 46-53, online version
  41. Busquets, E. and Ivantysynova, M. 2015. Adaptive Robust Motion Control of an Excavator Hydraulic Hybrid Swing Drive. SAE International Journal of Commercial Vehicles, 8(2):568-582, 2015, doi:10.4271/2015-01-2853, online version. SAE COMVEC Congress Technical Paper Selected for Journal Publication.
  42. Hippalgaonkar, R. and Ivantysynova, M. 2015. Optimal Power Management for DC Hydraulic Hybrid Multi-Actuator Machines - Part 1: Theoretical Studies, Modeling and Simulation. ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 138, Issue 5, 051002-1-23, doi:10.1115/1.4032742, online version.
  43. Hippalgaonkar, R. and Ivantysynova, M. 2015. Optimal Power Management for DC Hydraulic Hybrid Multi-Actuator Machines - Part 2: Machine Implementation and Measurement. ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 138, Issue 5, 051003-1-12, doi:10.1115/1.4032743, online version.
  44. Padovani, D. and Ivantysynova, M. 2016. Investigation of an Energy Efficient Hydraulic Propulsion System for a Railway Machine. Journal of Dynamic Systems, Measurement, and Control, Vol. 138, Issue 3, 031009-1-9. doi:10.1115/1.4032223. online version
  45. Shang, L. and Ivantysynova, M. 2016. A temperature adaptive piston design for swash plate type axial piston machines. International Journal of Fluid Power, doi:10.1080/14399776.2016.1213115. online version
  46. Kwon, H., Sprengel, M. and Ivantysynova, M. 2016. Thermal modeling of a hydraulic hybrid vehicle transmission based on thermodynamic analysis. Energy, Vol. 116, pp. 650-660. online version
  47. Taeho, K. and Ivantysynova, M. 2017. Active Vibration Control of Swash Plate Type Axial Piston Machine with Two-weight Notch LMS / FxLMS filters. Energies.

Peer Reviewed Conference Papers

  1. Ivantysynova, M. 1998. Pump Controlled Actuator - a Realistic Alternative for Heavy Duty Manipulators and Robots. International Scientific Forum in Fluid Power Control of Machinery and Manipulators, Cracow, Fluid Power Net Publication (2000), chapter 5, pp. 101 - 123.
  2. Ivantysynova, M. und Grabbel, J. 1998. Hydraulic Joint Servo Actuators for Heavy Duty Manipulators and Robots. Proc. 2nd. International Conference on Machine Automation ICMA Tampere, Finland, pp. 729-742.
  3. Ivantysynova, M. 1999. A new approach to the design of sealing and bearing gaps of displacement machines. Fourth JHPS International Symposium on Fluid Power, Tokyo '99, pp. 45-50.
  4. Ivantysynova, M. 2000. Displacement Controlled Linear and Rotary Drives for Mobile Machines with Automatic Motion Control. 2000 SAE International OFF-Highway & Powerplant Congress, Milwaukee, Wisconsin, USA. SAE Technical Papers 2000-01-2562. doi:10.4271/2000-01-2562.
  5. Wieczorek, U. and Ivantysynova, M. 2000. CASPAR - A Computer Aided Design Tool for Axial Piston Machines. Proc. Bath Workshop on Power transmission and Motion Control PTMC 2000, Bath, UK, pp. 113-126.
  6. Ivantysynova, M. and Grabbel, J. 2000. Control strategies for hydraulic joint servo actuators for mobile robotic applications. Proc. International Conference on Machine Automation ICMA 2000, Osaka, Japan, pp. 401-408.
  7. Mikeska, D. and Ivantysynova, M. 2002. Virtual prototyping of power split drives. Proc. Bath Workshop on Power Transmission and Motion Control PTMC 2002, Bath, UK, pp. 95-111.
  8. Ivantysynova, M. and Ossyra, J.C. 2002. Hardware in-the-loop test environment for vehicle driveline control optimization. Proc. of Fourth International Conference on Machine Automation ICMA'02, Tampere, Finland, pp. 57-65.
  9. Ivantysynova, M. and Huang, Ch. 2002. Investigation of the gap flow in displacement machines considering the elastohydrodynamic effect. 5th JFPS International Symposium on Fluid Power. Nara, Japan. pp. 219-229. - invited lecture
  10. Ivantysynova, M. et al 2002. Prediction of swash plate moment using the simulation tool CASPAR. ASME International Mechanical Engineering Congress, New Orleans, USA, IMECE 2002-39322.
  11. Huang, C. and Ivantysynova, M. 2003. A new approach to predict the load carrying ability of the gap between valve plate and cylinder block. Bath Workshop on Power transmission and Motion Control PTMC 2003, Bath, UK, pp. 225 - 239. - award.
  12. Ivantysynova, M. 2003. Prediction of pump and motor performance by computer simulation. 1st International Conference on Computational Methods in Fluid Power Technology. Melbourne November 2003, Australia, pp. 505-522.
  13. Osyyra, J.C. and Ivantysynova, M. 2004. Application of a Direct Optimization Procedure for Drive Line Control. Bath Workshop on Power transmission and Motion Control PTMC 2004, Bath, UK. pp. 53-69.
  14. Ivantysynova, M., Huang, C. and Christiansen, S.-K. 2004. Computer Aided Valve Plate Design - An Effective Way to Reduce Noise. Proceedings of the SAE Commercial Vehicle Engineering Congress & Exhibition. Chicago, IL, USA. SAE Technical Paper 2004-01-2621.
  15. Krauss, A. and Ivantysynova, M. 2004. Power Split Transmissions Versus Hydrostatic Multiple Motor Concepts - A Comparative Analysis. Proceedings of the SAE Commercial Vehicle Engineering Congress & Exhibition. Chicago, IL, SAE Technical Paper 2004-01-2627.
  16. Rahmfeld, R. and Ivantysynova, M. and Eggers, B. 2004. Active Vibration Damping for Off-Road Vehicles Using Valveless Linear Actuators. Proceedings of the SAE Commercial Vehicle Engineering Congress & Exhibition. Chicago, IL, USA. SAE Technical Paper 2004-01-2655.
  17. Ossyra, J-C. and Ivantysynova, M. 2004. Drive Line Control for Off-Road Vehicles Helps to Save Fuel. Proceedings of the SAE Commercial Vehicle Engineering Congress & Exhibition. Chicago, IL, USA. SAE Technical Paper 2004-01-2673
  18. Ossyra, J.-C. and Ivantysynova, M. 2005. Fuel Savings by Closed Loop Control. IFPE Technical Conference, Las Vegas, USA. Technical Paper NCFP I05-2.1
  19. Ivantysynova, M. and S.K. Christiansen, 2005. Automatic Valve Plate Design based on optimized Pressure Profile. IFPE Technical Conference, Las Vegas, USA. Technical Paper NCFP I05-14.1.
  20. Ivantysynova, M., Huang, C. and Behr, R. 2005. Measurements of elastohydro-dynamic pressure field in the gap between piston and cylinder. Bath Workshop on Power Transmission and Motion Control PTMC 2005, Bath, UK, pp. 451 - 465. - Best paper award.
  21. Eggers, B.; Rahmfeld, R.; Ivantysynova, M. 2005. An energetic comparison between valveless and valve controlled active vibration damping for off-road vehi-cles. 6th JFPS International Symposium on Fluid Power. Tsukuba, Japan. pp. 275-283.
  22. Huang, Ch., 2006. An advanced gap flow model considering piston micro motion and elastohydrodynamic effect, 4th Fluid Power Net International (FPNI) PhD Symposium 2006, Sarasota, USA. pp. 173-188
  23. Carl, B.; Williams, K and Ivantysynova, M. 2006. Comparison of Operational Characteristics in Power Split Continuously Variable Transmissions. 2006 SAE International Commercial Vehicle Engineering Congress , Chicago, IL, USA. SAE Technical Paper 2006-01-3468.
  24. Ivantysynova, M., Huang , C. and Japing, A. 2006. Determination of gap surface temperature distribution in axial piston machines. ASME International Mechanical Engineering Congress, Chicago, USA, IMECE2006-15249.
  25. Ganesh, K.S. and Ivantysynova, M. 2006. Impact of valve plate design on noise, volumetric efficiency and control effort in an axial piston pump. ASME International Mechanical Engineering Congress, Chicago, USA, IMECE2006-15001.
  26. Klop, R., Williams, K., Dyminski, D., Ivantysynova, M. 2007. A simulation study to reduce noise of compact power-split-drive transmissions. 2007. Proc. of the 20th Power Transmission and Motion Control Symposium (PTMC 2007), Bath, England, United Kingdom. pp. 83-102.
  27. Kumar, R., Ivantysynova, M., and Williams, K. 2007. Study of Energetic Characteristics in Power Split Drives for on Highway Trucks and Wheel Loaders. 2007 SAE International Commercial Vehicle Engineering Congress , Chicago, IL, USA. SAE Technical Paper 2007-01-4193.
  28. Zimmerman, J., Pelosi, M., Williamson, C., and Ivantysynova, M. 2007. Energy Consumption of an LS Excavator Hydraulic System.2007 ASME International Mechanical Engineering Congress and Exposition, Seattle, WA, USA. IMECE2007-42267.
  29. Williams, K. and Ivantysynova, M. 2008. Towards and Optimal Energy Management Strategy for Hybrid Hydraulic Powertrains Based on Dual Stage Power Split Principle. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 27-40.
  30. Kumar, R. and Ivantysynova, M. 2008. Towards and Optimal Energy Management Strategy for Hybrid Hydraulic Powertrains Based on Output-Coupled Power Split Principle. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 41-51.
  31. Klop, R. and Ivantysynova, M. 2008. Investigation of Noise Source Reduction Strategies in Hydrostatic Transmissions. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 63-76.
  32. Zimmerman, J. and Ivantysynova, M. 2008. The Effect of System Pressure Level on the Energy Consumption of Displacement Controlled Actuator Systems. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 77-92.
  33. Jouini, N. and Ivantysynova, M. 2008. Valve Plate Surface Temperature Prediction in Axial Piston Machines. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 95-110.
  34. Seeniraj, G. and Ivantysynova, M. 2008. Noise Reduction in Axial Pison Machines Based on Multi-Objective Optimization. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 111-123.
  35. Pelosi, M. and Ivantysynova, M. 2008. A New Fluid-Structure Interaction Model for the Slipper-Swashplate Interface. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 219-236.
  36. Fredrickson, A. and Ivantysynova, M. 2008. A Study of Gap Flow Conditions between the Piston and the Cylinder. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 273-285.
  37. Baker, J. and Ivantysynova, M. 2008. Investigation of Power Losses in the Lubricating Gap between the Cylinder Block and Valve Plate of Axial Piston Machines. Proc. of the 5th FPNI PhD Symposium, Cracow, Poland, pp. 302-319. - Best paper award.
  38. Williamson, C., Zimmerman, J. and Ivantysynova, M. 2008. Efficiency Study of an Excavator Hydraulic System Based on Displacement-Controlled Actuators. Bath ASME Symposium on Fluid Power and Motion Control (FPMC2008), pp. 291-307.
  39. Williamson, C. and Ivantysynova, M. 2008. Pump Mode Prediction for Four-quadrant Velocity Control of Valveless Hydraulic Actuators. Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, Vol. 2, pp. 323-328.
  40. Ivantysynova, M. 2008. Innovations in Pump Design – What are future directions?. Proceedings of the 7th JFPS International Symposium on Fluid Power, Toyama 2008, pp. 59 -64. Invited lecture organized session agriculture and mining machinery.
  41. Klop, R. and Ivantysynova, M. 2008. Influence of Line Length Concerning Noise Source Generation in Hydrostatic Transmissions. 2008 SAE International Commercial Vehicle Engineering Congress & Exhibition, Rosemont, IL, USA. SAE Technical Paper 2008-01-2722.
  42. Seeniraj, G. and Ivantysynova, M. 2008. Multi-objective Optimization Tool for Noise Reduction in Axial Piston Machines. Proceedings of SAE Commercial Vehicles Exhibition, 2008 Rosemont, IL. doi:10.4271/2008-01-2723.
  43. Klop, R. and Ivantysynova, M. 2009. A Method of Characteristics Based Coupled Pump/Line Model to Predict Noise Sources of Hydrostatic Transmissions. Bath ASME Symposium on Fluid Power and Motion Control (FPMC2009), [DSCC2009-2779].
  44. Kumar, R. and Ivantysynova, M. 2009. An Optimal Power Management Strategy for Hydraulic Hybrid Output Coupled Power-Split Transmission. Bath ASME Symposium on Fluid Power and Motion Control (FPMC2009), [DSCC2009-2780].
  45. Pelosi, M. and Ivantysynova, M. 2009. A Novel Thermal Model for the Piston/Cylinder Interface of Piston Machines. Bath ASME Symposium on Fluid Power and Motion Control (FPMC2009), [DSCC2009-2782].
  46. Zimmerman, J. and Ivantysynova, M. 2009. Effect of Installed Hydraulic Corner Power on the Energy Consumption and Performance of Multi-Actuator Displacement Controlled Mobile Machines. Bath ASME Symposium on Fluid Power and Motion Control (FPMC2009), [DSCC2009-2781]. - Best paper award.
  47. Kumar, R. and Ivantysynova, M. 2010. Investigation of Various Power Management Strategies for a Class of Hydraulic Hybrid Powertrains: Theory and Experiments Proc. of the 6th FPNI PhD Symposium, West Lafayette, USA, pp 87 - 99.
  48. Zimmerman, J. and Ivantysynova, M. 2010. Reduction of Engine and Cooling Power by Displacement Control Proc. of the 6th FPNI PhD Symposium, West Lafayette, USA, pp 339 - 352.
  49. Pelosi, M. and Ivantysynova, M. 2010. A Simulation Study on the Impact of Material Properties on Piston/Cylinder Lubricating Gap Performance Proc. of the 6th FPNI PhD Symposium, West Lafayette, USA, pp.373-386.
  50. Williamson, C. and Ivantysynova, M. 2010. Stability and Motion Control of Inertial Loads with Displacement Controlled Hydraulic Actuators Proc. of the 6th FPNI PhD Symposium, West Lafayette, USA, pp.499-514.
  51. Klop, R. and Ivantysynova, M. 2010. Validation of a Coupled Pump-Motor-Line Model to Predict Noise Sources of Hydrostatic Transmissions Proc. of the 6th FPNI PhD Symposium, West Lafayette, USA, pp.665-680.
  52. Pelosi, M., Zecchi, M., and Ivantysynova, M. 2010. A fully-coupled thermo-elastic model for the rotating kit of axial piston machines. Bath ASME Symposium on Fluid Power and Motion Control. pp 217 - 234.
  53. Zimmerman, J. and Ivantysynova, M. 2011. Hybrid Displacement Controlled Multi-Actuator Hydraulic Systems. Proceedings of the 12th Scandinavian International Conference on Fluid Power, May 18-20 2011, Tampere, Finland, pp 217 - 233.
  54. Hippalgaonkar, R., Zimmerman, J. and Ivantysynova, M. 2011. Investigation Of Power Management Strategies For A Multi-Actuator Hydraulic Hybrid Machine System. SAE 2011 Commercial Vehicle Engineering Congress, , Sep 13-14 2011, Rosemont, IL, USA. SAE Technical Paper 2011-01-2273
  55. Schenk, A. and Ivantysynova, M. 2011. An Investigation of the Impact of Elastohydrodynamic Deformation on Power Loss in the Slipper Swashplate Interface. 8th JFPS International Symposium on Fluid Power, , Okinawa, Japan.- Best paper award.
  56. Pelosi, M. and Ivantysynova, M. 2011. Surface Deformation Enables High Pressure Operation of Axial Piston Pumps. ASME/Bath Symposium on Fluid Power and Motion Control, Arlington, VI, USA. - Best paper award.
  57. Zimmerman, J., Hippalgaonkar, R. and Ivantysynova, M. 2011. Optimal Control for the Series-Parallel Displacement Controlled Hybrid Excavator. ASME/Bath Symposium on Fluid Power and Motion Control, Arlington, VI, USA.
  58. Zecchi, M. and Ivantysynova, M. 2012. Cylinder block/valve plate interface - a novel approach to predict thermal surface loads. Proceedings of 8th IFK International Conference on Fluid Power, Dresden, Germany, Vol.1, pp.285-298.
  59. Hippalgaonkar, R., Zimmerman, J. and Ivantysynova, M. 2012. Fuel savings of a mini-excavator through a hydraulic hybrid displacement controlled system. Proceedings of 8th IFK International Conference on Fluid Power, Dresden, Germany, Vol.2, pp.139-154.
  60. Sprengel, M. and Ivantysynova, M. 2012. Coupling Displacement Controlled Actuation with Power Split Transmissions in Hydraulic Hybrid Systems for Off-Highway Vehicles. Bath Workshop on Power Transmission and Motion Control PTMC 2012, Bath, UK, pp. 505-517.
  61. Zecchi, M. and Ivantysynova, M. 2012. A novel approach to predict the cylinder block / valve plate interface performance in swash plate type axial piston machines. Bath/ASME Symposium on Fluid Power and Motion Control, Bath, UK.
  62. Daher, N. and Ivantysynova, M. 2013. Pump Controlled Steer-by-Wire System. SAE 2013 Commercial Vehicle Engineering Congress, , Oct. 1-3 2013, Rosemont, IL, USA. SAE Technical Paper 2013-01-2349. - 2013 SAE Excellence in Oral Presentation Award.
  63. Daher, N. and Ivantysynova, M. 2013. System Synthesis and Controller Design of a Novel Pump Controlled Steer-By-Wire System Employing Modern Control Techniques. ASME/Bath Symposium on Fluid Power and Motion Control, Oct. 6-9, 2013, Sarasota, FL, USA. Paper No. FPMC2013-4410
  64. Schenk A., Zecchi M., and Ivantysynova, M. 2013. Accurate Prediction of Axial Piston Machine’s Performance Through a Thermo-Elasto-Hydrodynamic Simulation Model. ASME/Bath Symposium on Fluid Power and Motion Control, Oct. 6-9, 2013, Sarasota, FL, USA. Paper No. FPMC2013-4456
  65. Busquets, E. and Ivantysynova, M. 2014. An Adaptive Robust Control for Displacement-controlled End-effectors. Proceedings of the 8th FPNI PhD Symposium, Lappeenranta, Finland. doi:10.1115/FPNI2014-7808
  66. Sprengel, M. and Ivantysynova, M. 2014. Hardware-in-the-Loop Testing of a Novel Blended Hydraulic Hybrid Transmission. Proceedings of the 8th FPNI PhD Symposium. Lappeenranta, Finland. - Best Paper Award (Backe Medal) -
  67. Mizell, D. and Ivantysynova, M. 2014. Material Combinations for the Piston-Cylinder Interface of Axial Piston Machines: A Simulation Study. Proceedings of the 8th FPNI PhD Symposium, Lappeenranta, Finland.
  68. Chacon, R. and Ivantysynova, M. 2014. An Investigation of the Impact of Micro Surface Shaping on Cylinder Block/Valve Plate Interface Performance. Proceedings of the 8th FPNI PhD Symposium, Lappeenranta, Finland.
  69. Wondergem, A. and Ivantysynova, M. 2014. The Impact of the Surface Shape of the Piston on Power Losses. Proceedings of the 8th FPNI PhD Symposium, Lappeenranta, Finland.
  70. Padovani, D. and Ivantysynova, M. 2014. Energy Efficient Hydraulic Rotary Drive: Analysis and Comparison of Two Different Displacement Controlled Solutions. Proceedings of the 8th FPNI PhD Symposium, Lappeenranta, Finland.
  71. Busquets, E. and Ivantysynova, M. 2014. A Robust Multi-Input Multi-Output Control Strategy for the Secondary Controlled Hydraulic Hybrid Swing of a Compact Excavator with Variable Accumulator Pressure. Proceedings of the ASME/BATH 2014 Symposium on Fluid Power & Motion Control. Bath, United Kingdom. doi:10.1115/FPMC2014-7859
  72. Daher, N. and Ivantysynova, M. 2014. A Steer-by-wire System that Enables Remote and Autonomous Operation. SAE 2014 Commercial Vehicle Engineering Congress, Oct. 7-9 2014, Rosemont, IL, USA. SAE Technical Paper 2014-01-2404.
  73. Sprengel, M. and Ivantysynova, M. 2014. Recent Developments in a Novel Blended Hydraulic Hybrid Transmission. SAE 2014 Commercial Vehicle Engineering Congress, Oct. 7-9 2014, Rosemont, IL, USA. SAE Technical Paper 2014-01-2399.
  74. Busquets, E. and Ivantysynova, M. 2014. The World's First Displacement Controlled Excavator Prototype with Pump Switching - A Study of the Architecture and Control. Proceedings of the 9th JFPS International Symposium on Fluid Power. Matsue, Japan. pp. 324-331. Best Paper Award.
  75. Padovani, D. and Ivantysynova, M. 2015. The Concept of Secondary Controlled Hydraulic Motors Applied to the Propulsion System of a Railway Machine. Proceedings of the 14th Scandinavian International Conference on Fluid Power, May 20-22, 2015. Tampere, Finland.
  76. Busquets, E. and Ivantysynova, M. 2015. Priority-Based Supervisory Controller for a Displacement-Controlled Excavator with Pump Switching. Proceedings of the ASME/Bath 2015 Symposium on Fluid Power and Motion Control. Oct. 12-14, 2015. Chicago, IL, USA.
  77. Ernst, M. and Ivantysynova, M. 2015. Micro Surface Shaping of the High-Pressure Operation of Piston Machines with Water as a Working Fluid. Proceedings of the ASME/Bath 2015 Symposium on Fluid Power and Motion Control. Oct. 12-14, 2015. Chicago, IL, USA.
  78. Bleazard, T., Haria, H., Sprengel, M., and Ivantysynova, M. 2015. Optimal Control Based Design and Application of the Blended Hydraulic Hybrid. Proceedings of the ASME/Bath 2015 Symposium on Fluid Power and Motion Control. Oct. 12-14, 2015. Chicago, IL, USA.
  79. Padovani, D. and Ivantysynova, M. 2015. Simulation and Analysis of Non-Hybrid Displacement-Controlled Hydraulic Propulsion Systems Suitable for Railway Applications. Proceedings of the ASME/Bath 2015 Symposium on Fluid Power and Motion Control. Oct. 12-14, 2015. Chicago, IL, USA.
  80. Wondergem, A. and Ivantysynova, M. 2015. The Impact of Micro-Surface Shaping on the Piston/Cylinder Interface of Swash Plate Type Machines. Proceedings of the ASME/Bath 2015 Symposium on Fluid Power and Motion Control. Oct. 12-14, 2015. Chicago, IL, USA.
  81. Kim, T. and Ivantysynova, M. 2016. Active Vibration Control of Axial Piston Machine using Higher Harmonic Least Mean Square Control of Swash Plate. Proceedings of the 10th IFK International Conference on Fluid Power, Dresden, Germany, Vol. 1, pp. 91-104.
  82. Chacon, R. and Ivantysynova, M. 2016. An Investigation of the Impact of the Elastic Deformation of the Endcase/Housing on Axial Piston Machines Cylinder Block/Valve Plate Lubricating Interface. Proceedings of the 10th IFK International Conference on Fluid Power, Dresden, Germany, Vol. 1, pp. 283-294.
  83. Wondergem, A. and Ivantysynova, M. 2016. The Impact of Micro-Surface Shaping of the Piston on the Piston/Cylinder Interface of an Axial Piston Machine. Proceedings of the 10th IFK International Conference on Fluid Power, Dresden, Germany, Vol. 2, pp. 289-300.
  84. Busquets, E. and Ivantysynova, M. 2016. Toward Supervisory-Level Control for the Energy Consumption and Performance Optimization of Displacement-Controlled Hydraulic Hybrid Machines. Proceedings of the 10th IFK International Conference on Fluid Power, Dresden, Germany, Vol. 3, pp. 163-174.
  85. Chacon, R. and Ivantysynova, M. 2016. Advanced Virtual Prototyping of Axial Piston Machines. Proceedings of the 9th FPNI Ph.D. Symposium on Fluid Power, October 26-28, 2016, Florianópolis, SC, Brazil. FPNI2016-1561
  86. Jenkins, R. and Ivantysynova, M. 2016. Investigation of Instability of a Pressure Compensated Vane Pump. Proceedings of the 9th FPNI Ph.D. Symposium on Fluid Power, October 26-28, 2016, Florianópolis, SC, Brazil. FPNI2016-1535. Recognized Paper Award
  87. Shang, L. and Ivantysynova, M. 2016. . An Investigation of Design Parameters Influencing the Fluid Film Behavior in Scaled Cylinder Block/Valve Plate Interface. Proceedings of the 9th FPNI Ph.D. Symposium on Fluid Power, October 26-28, 2016, Florianópolis, SC, Brazil. FPNI2016-1540
  88. Kalbfleisch, P., Kim, T., and Ivantysynova, M. 2016. Robotic Arm for Automatic Sound Intensity Measurements. Proceedings of the Bath ASME Symposium on Fluid Power and Motion Control (FPMC2016), September 7–9, 2016, Bath, UK. FPMC2016-1788
  89. Keller, N. and Ivantysynova, M. 2017. A New Approach to Sizing Low-Pressure Systems. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control (FPMC 2017), October 16-19, 2017, Sarasota, FL, USA. FPMC2017-4344
  90. Kwon, H. and Ivantysynova, M. 2017. System and Thermal Modeling for a Novel On-Road Hydraulic Hybrid Vehicle by Comparison with Measurements in The Vehicle. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control (FPMC 2017), October 16-19, 2017, Sarasota, FL, USA. FPMC2017-4303
  91. Kim, T. and Ivantysynova, M. 2017. Active Vibration / Noise Control of Axial Piston Machine using Swash Plate Control. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control (FPMC 2017), October 16-19, 2017, Sarasota, FL, USA. FPMC2017-4304
  92. Shang, L. and Ivantysynova, M. 2017. A path toward effective piston/cylinder interface scaling approach. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control (FPMC 2017), October 16-19, 2017, Sarasota, FL, USA. FPMC2017-4345
  93. Ernst, M. and Ivantysynova, M. 2017. Cylinder bore micro-surface shaping for high pressure axial piston machine operation using water as hydraulic fluid. Proceedings of the ASME/BATH 2017 Symposium on Fluid Power and Motion Control (FPMC 2017), October 16-19, 2017, Sarasota, FL, USA. FPMC2017-4285k
  94. Shang, L. and Ivantysynova, M. 2017. Thermodynamic Analysis on Compressible Viscous Flow and Numerical Modeling Study on Piston/Cylinder Interface in Axial Piston Machine. Proceedings of the 10th JFPS International Symposium on Fluid Power., Fukuoka, Japan, pp. 475-481.
  95. Jenkins, R. and Ivantysynova, M. 2018. A Semi-Empirical Lumped Parameter Model of a Pressure Compensated Vane Pump. Proceedings of the 11th IFK International Fluid Power Conference , March 19-21,2018, Aachen, Germany, Vol. 1, pp. 168-181.
  96. Kwon, H., Keller, N. and Ivantysynova, M. 2018. Thermal Management of Open and Closed Circuit Hydraulic Hybrids – A Comparison Study. Proceedings of the 11th IFK International Fluid Power Conference , March 19-21,2018, Aachen, Germany, Vol.3, pp.14-26.
  97. Shang, L. and Ivantysynova, M. 2018. Advanced heat transfer model for piston/cylinder interface. Proceedings of the 11th IFK International Fluid Power Conference , March 19-21,2018, Aachen, Germany, Vol.1, pp. 587-595 - Best paper award.

Conference Papers

  1. Ivantysynova, M. 1985. Berechnung des Temperaturfelds im Ölfilm zwischen Kolben und Zylinder in hydrostatischen Kolbenmaschinen. Proc.11. Conference Fluid Power, Brno, Czech Republic.
  2. Ivantysynova, M. 1985. Messung des Temperaturfelds im Spalt zwischen Kolben und Zylinder von Axialkolbenmaschinen. Proc. V. Conference Experimental Methods in Fluid Power, Stará Lubovna, Czech Republic, pp. 71 -83.
  3. Ivantysynova, M. et al 1995. Energy saving hydraulic systems in aircraft - a way to save fuel. Proc. 4th Scandinavian International Conference on Fluid Power, Tampere, Finland, pp. 1000 - 1014.
  4. Ivantysynova, M. 1995. Der Platz der Fluidtechnik in Flugzeugsystemen - eine neue Studienrichtung an der TU Hamburg-Harburg. Proc. 10. Fachtagung Hydraulik und Pneumatik, Dresden, Germany, pp. 48 - 55.
  5. Ivantysynova, M. 1996. Neue Aktuatortechnologien in der zivilen Luftfahrt. Proc. 12. Aachener Fluidtechnisches Kolloquium, Germany, pp. 355 - 371.
  6. Ivantysynova, M.1998. Die Schrägscheibenmaschine - eine Verdrängereinheit mit großem Entwicklungspotential. Proc. 1. Internationales Fluidtechnisches Kolloquium IFK Aachen, Germany, pp. 359 - 374.
  7. Ivantysynova, M. 1998. Fluid power Education - Demands of the 21st century, Proc. 1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 5- 12.
  8. Grabbel, J. and Ivantysynova, M. 1998. Hydraulic servo joint actuators for mobile manipulators. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 21- 28.
  9. Lasaar, R. and Ivantysynova, M. 1998. A new test rig for measuring friction forces in swash plate type axial piston pumps. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 59- 69.
  10. Olems, L. and Ivantysynova, M. 1998. Investigation of the cylinder /piston temperature behaviour in axial piston pumps. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 29 -36.
  11. Rahmfeld, R. and Ivantysynova, M. 1998. Energy saving hydraulic actuators for mobile machnies. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 47 - 57.
  12. Wieczorek, U. and Ivantysynova, M. 1998. Computer Aided Optimization of Bearing and Sealing Gaps in Hydrostatic Machines - A CAE Tool for Design Engineers. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 37 - 45.
  13. Berg, H. and Ivantysynova, M. 1998. Robust Control of Variable Displacement Hydraulic Motors. Proc.1st. Bratislavian Fluid Power Symposium, Casta-Pila, Slovakia, pp. 13 - 20.
  14. Ivantysynova, M. 1998. Neue Aktuatorprinzipien für Schwerlastmanipulatoren und Roboter. Proc. 16th International Conference on Hydraulics and Pneumatics, Brno Czech Republic.
  15. Ivantysynova, M.1998: Potential of Secondary Control for Hydraulic Drives Used in Modern Flight Control Systems. Proc. International Conference on Recent Advances in Aerospace Hydraulics, Toulouse, France, pp. 67 - 72.
  16. Ivantysynova, M. 1999. Computer Aided Design of Displacement Machines. Proc. International Workshop on Computer Software for Design, Analysis and Control of Fluid Power Systems, Trondheim, Norway.
  17. Ivantysynova, M. 1999. Ways for Efficiency Improvements of Modern Displacement Machines. Proc. 6th Scandinavian International Conference on Fluid Power, Tampere, Finland, pp. 77-92. - invited lecture.
  18. Grabbel, J. and Ivantysynova, M. 1999. Integrated Servo Joint Actuators for Robotic Applications. 6th Scandinavian International Conference on Fluid Power, Tampere, Finland, pp. 1253 - 1266.
  19. Rahmfeld, R. and Ivantysynova, M. 2000. Energiesparender geregelter Linearantrieb mit Differentialzylinder. Proc. 2. International Fluid Power Conference IFK Dresden, Germany, Vol. 1, pp. 191 - 206.
  20. Lasaar, R. and Ivantysynova, M. 2001. Gap geometry Variations in Displacement Machines and their Effect on the Energy Dissipation. Proc. of 5th International Conference on Fluid Power Transmission and Control (ICFP'2001), Hangzhou, China, pp. 296 - 301.
  21. Rahmfeld, R. and Ivantysynova, M. 2001. Displacement Controlled Linear Actuator with Differential Cylinder - A Way to Save Primary Energy in Mobile Machines. Proc. of 5th International Conference on Fluid Power Transmission and Control (ICFP'2001), Hangzhou, China, pp. 316 - 322.
  22. Ivantysynova, M. 2001. Energy Losses of Modern Displacement Machines - a New Approach of Modelling. Proc. 7th Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2001, Vol. 1, pp. 377 - 395.
  23. Grabbel, J. and Ivantysynova, M. 2001. Control Strategies for Joint Integrated Servo Actuators in Mobile Machinery. Proc. 7th Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2001, Vol. 3, pp. 281 - 296.
  24. Ivantysynova, M. 2002. Displacement Controlled Actuator Technology - Future for Fluid Power in Aircraft and other Applications. Proc. of the 3rd International Fluid Power Conference (3. IFK), Aachen, Germany, Vol. 2, pp. 425 - 440.
  25. Lasaar, R. and Ivantysynova, M. 2002. Advanced gap design - basis for innovative displacement machines. Proc. of the 3rd International Fluid Power Conference (3. IFK), Aachen, Germany, Vol. 2, pp. 215 - 230.
  26. Grabbel, J. and Ivantysynova, M. 2003. Model Adaptation for Robust Control Design of Hydraulic Joint Servo Actuators. Proc. of 6th International Conference on Fluid Power Transmission and Control (ICFP'2003), Wuhan, China, pp. 16 - 24.
  27. Ivantysynova, M. and Ossyra, J.C. 2003. Control Concept for Hydrostatic Drive Lines. Proc. of 6th International Conference on Fluid Power Transmission and Control (ICFP'2003), Wuhan, China, pp. 9 - 15.
  28. Rahmfeld, R. and Ivantysynova, M. 2003. New Displacement Controlled Linear Actuator Technology - A Suitable Control Element for Active Oscillation Damping. The Eight Scandinavian International Conference on Fluid Power, Tampere, Finland, pp. 1139 - 1154.
  29. Ivantysynova, M. 2003. EHD-basiertes Simulationsmodell für die gekoppelten Tribosysteme von Verdrängermaschinen. 44. Tribologie-Fachtagung, Göttingen, Volume 2, pp. 46/1-46/14.
  30. Oppermann, M. and Ivantysynova, M. 2003. Thermodynamic Measurement for Modular Condition monitoring Systems of Mobile Hydrostatic Machines. 18th International Conference on Hydraulics and Pneumatics. Prague, Czech Republic, pp. 94 - 108.
  31. Ossyra, J-C. and Ivantysynova, M. 2003. Robust control for a new hydrostatic driveline control concept. 18th International Conference on Hydraulics and Pneumatics. Prague, Czech Republic, pp. 365 - 376.
  32. Krauss, Th. A. and Ivantysynova, M. 2003. Control concept for a multiple-motor type hydrostatic transmission. 18th International Conference on Hydraulics and Pneumatics. Prague, Czech Republic, pp. 183 - 194.
  33. Ivantysynova, M. et al. 2003. IBIS -Advanced multi-functional machinery for outdoor applications. 18th International Conference on Hydraulics and Pneumatics. Prague, Czech Republic, pp. 137 - 149.
  34. Rahmfeld, R. and Ivantysynova, M. 2003. Energy saving hydraulic displacement controlled linear actuators for industrial applications and mobile machine systems. LDIA Birmingham, UK, pp. 105-110.
  35. Rahmfeld, R., Ivantysynova, M and Weber, J. 2004. Displacement Controlled Wheel Loader - a simple and clever Solution. Proc. of the 4th International Fluid Power Conference (4. IFK), Dresden, Germany, Vol. 2, pp. 183 - 196.
  36. Ivantysynova, M. and Huang, C. 2005. Thermal Analysis in Axial Piston Machines using CASPAR. Proc. of the Sixth International Conference on Fluid Power Transmission and Control, Hangzhou, China, pp. 573-578.
  37. Oppermann, M. and Ivantysynova, M. 2005. In-Field Tests of a Modular Condi-tion Monitoring System using an Experimental Off-Road Vehicle. Proc. 9th Scan-dinavian International Conference on Fluid Power, Linköping, Sweden, 2005, electronic proceedings only.
  38. Ivantysynova, M., Seeniraj, G., Huang, C. 2005. Comparison of different valve plate designs focusing on oscillating forces and flow pulsation. Proc. 9th Scandinavian International Conference on Fluid Power, Linköping, Sweden, 2005, electronic proceedings only.
  39. Ivantysynova, M., J-C. Ossyra, J. Liscouet, G. Franzoni and H. Zhang. 2006. Continuously Variable Transmissions for Truck Applications - Secondary Control versus Power Split. Proc. of the 5th International Fluid Power Conference (5. IFK), Aachen, Germany, Vol. 3, pp. 25-44
  40. Huang, C. and Ivantysynova, M. 2006. An advanced gap flow model considering piston micro motion and elastohydrodynamic effect. Proc. of the 4th FPNI PhD symposium, Sarasota, FL, USA, pp. 181-196.
  41. Williamson, C. and Ivantysynova, M. 2007. The Effect of Pump Efficiency on Displacement-Controlled Actuator Systems. Proc. of the Tenth Scandinavian International conference on Fluid Power (SICFP'07), Tampere, Finland. Vol. 2, pp. 301-326.
  42. Williams, K., Kumar, R. and Ivantysynova, M. 2008. Robust Control for a Dual Stage Power Split Transmission with Energy Recovery. Proceedings of the 6th International Fluid Power Conference Dresden 2008 (6IFK), Vol. 1, pp. 127-144.
  43. Baker, J. and Ivantysynova, M. 2009. Advanced surface design for reducing power losses in axial piston machines. Proceedings 11th Scandinavian International Conference on Fluid Power, SICFP’09, June 2-4, 2009, Linköping, Sweden
  44. Pelosi, M. and Ivantysynova, M. 2009. A Novel Fluid-structure Interaction Model for Lubricating Gaps of Piston Machines. Proceedings of the Fifth Fluid Structure Interaction Conference, eds. C.A. Brebbia, WIT Press, Southampton, pp. 13-24, 2009
  45. Williamson, C. and Ivantysynova, M. 2010. Power Optimization for Multi-Actuator Pump-Controlled Systems Proceedings of the 7th International Fluid Power Conference Aachen 2010 (7IFK), Vol 1. pp.91-102
  46. Klop, R. and Ivantysynova, M. 2010. Sound Intensity Measurements to Investigate Noise Generation of Hydrostatic Transmissions Proceedings of the 7th International Fluid Power Conference Aachen 2010 (7IFK), Vol. 2, 229-242
  47. Kumar, R. and Ivantysynova, M. 2010. The Hydraulic Hybrid Alternative for Toyota Prius - A Power Management Strategy for Improved Fuel Economy Proceedings of the 7th International Fluid Power Conference Aachen 2010 (7IFK), Vol. 2, pp. 329-341
  48. Cross, M. and Ivantysynova, M. 2011. Practical Considerations for Pump / Motor Selection in Hydraulic Hybrid Vehicles. Proceedings of the 52nd National Conference on Fluid Power 2011, NCFP I11-2.3
  49. Pelosi, M. and Ivantysynova, M. 2011. The Influence of Pressure and Thermal Deformation on the Piston/Cylinder Interface Film Thickness. Proceedings of the 52nd National Conference on Fluid Power 2011, NCFP I11-9.3
  50. Rose, J. and Ivantysynova, M. 2011. A Study of Pump Control Systems for Smart Pumps. Proceedings of the 52nd National Conference on Fluid Power 2011, NCFP I11-27.1
  51. Schenk, A. and Ivantysynova, M. 2011. Design and Optimization of the Slipper-Swashplate Interface Using an Advanced Fluid Structure Interaction Model. Proceedings of the 52nd National Conference on Fluid Power 2011, NCFP I11-4.2
  52. Zecchi, M. and Ivantysynova, M. 2011. A Novel Fluid Structure Interaction Model for the Cylinder Block/Valve Plate Interface of Axial Piston Machines. Proceedings of the 52nd National Conference on Fluid Power 2011, NCFP I11-9.2
  53. Zimmerman, J., Busquets, E. and Ivantysynova, M. 2011. 40% Fuel Savings by Displacement Control Leads to Lower Working Temperatures - A Simulation Study and Measurements. Proceedings of the 52nd National Conference on Fluid Power 2011. Las Vegas, NV, USA. NCFP I11-27.2. pp. 693-701
  54. Busquets, E. and Ivantysynova, M. 2012. Cooling power reduction of displacement controlled multi-actuator machines. Proceedings of the 7th FPNI PhD Symposium. Reggio Emilia, Italy. pp 453 - 466.
  55. Sprengel, M. and Ivantysynova, M. 2012. Energy saving system architecture for hydraulic hybrid off-highway vehicles. Proceedings of the 7th FPNI PhD Symposium, Jun. 27-30, 2012. Reggio Emilia, Italy, pp 517 - 533.
  56. Kim, D. and Ivantysynova, M. 2012. Valve plate optimization focusing on noise reduction in the axial piston machine with high volumetric efficiency. Proc. of the 7th FPNI PhD Symposium, Jun. 27-30, 2012. Reggio Emilia, Italy, pp 571 - 588.
  57. Zecchi, M. and Ivantysynova, M. 2012. An investigation of the impact of micro surface shaping on the cylinder block/valve plate inter-face performance through a novel thermo-elasto-hydrodynamic model. Proc. of the 7th FPNI PhD Symposium, Jun. 27-30, 2012. Reggio Emilia, Italy, pp 589 - 610 - Recognized paper award.
  58. Schenk, A. and Ivantysynova, M. 2012. The influence of swashplate elastohydrodynamic deformation. Proc. of the 7th FPNI PhD Symposium, Jun. 27-30, 2012. Reggio Emilia, Italy, pp 611 - 632 - Best paper award.
  59. Daher, N. and Ivantysynova, M. 2012. Electro-hydraulic energy-saving power steering systems of the future. Proc. of the 7th FPNI PhD Symposium, Jun. 27-30, 2012. Reggio Emilia, Italy, pp 929 - 952.
  60. Sprengel, M. and Ivantysynova, M. 2012. Novel Transmission Configuration for Hydraulic Hybrid Vehicles. Proceedings of the International Sci-Tech Conference “Machine Dynamics and Vibro Acoustics”, Samara, Russia, pp. 207-209.
  61. Kalbfleisch, P. and Ivantysynova, M. 2012. Noise Reduction in Hydraulic Axial-Piston Pumps and Motors. Proceedings of the International Sci-Tech Conference “Machine Dynamics and Vibro Acoustics”, Samara, Russia, pp. 209-210.
  62. Zecchi, M. and Ivantysynova, M. 2013. Spherical valve plate design in axial piston machines - A novel thermo-elasto-hydrodynamic model to predict the lubricating interface performance. The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013), Apr. 9-11, 2013. Hangzhou, China, pp. 325 - 329
  63. Daher, N. and Ivantysynova, M. 2013. Novel Energy-Saving Steer-by-Wire System for Articulated Steering Vehicles: A Compact Wheel Loader Case Study. Proceedings of the 13th Scandinavian International Conference on Fluid Power (SICFP2013). Jun. 3-5, 2013. Linkoping, Sweden.
  64. Hippalgaonkar, R. and Ivantysynova, M. 2013. A Series-Parallel Hydraulic Hybrid Mini-Excavator with Displacement Controlled Actuators. Proceedings of the 13th Scandinavian International Conference on Fluid Power (SICFP2013). Jun. 3-5, 2013. Linkoping, Sweden.
  65. Sprengel, M. and Ivantysynova, M. 2013. Investigation and Energetic Analysis of a Novel Hydraulic Hybrid Architecture for On-Road Vehicles. Proceedings of the 13th Scandinavian International Conference on Fluid Power (SICFP2013). Jun. 3-5, 2013. Linkoping, Sweden.
  66. Zecchi, M., Mehdizadeh A., and Ivantysynova, M. 2013. A novel approach to predict the steady state temperature in ports and case of swash plate type axial piston machines. Proceedings of the 13th Scandinavian International Conference on Fluid Power (SICFP2013). Jun. 3-5, 2013. Linkoping, Sweden.
  67. Sprengel, M. and Ivantysynova, M. 2013. Control Strategies for a Novel Blended Hydraulic Hybrid Transmission. Proceedings of the 22nd International Conference on Hydraulics and Pneumatics. Oct. 24-25, 2013. Prague, Czech Republic, pp. 15-22
  68. Busquets, E. and Ivantysynova, M. 2013. Thermal-hydraulic Behavior Prediction of a Valve Controlled Wheel Loader. Proceedings of the 22nd International Conference on Hydraulics and Pneumatics. Prague, Czech Republic. pp. 23-31
  69. Daher, N. and Ivantysynova, M. 2014. New Steering Concept for Wheel Loaders. Proceedings of the 9th International Fluid Power Conference (9IFK), Mar. 24-26, 2014. Aachen, Germany, Vol 1. pp.224-235
  70. Schenk, A. and Ivantysynova, M. 2014. A transient fluid structure interaction model for lubrication between the slipper and swashplate in axial piston machines. Proceedings of the 9th International Fluid Power Conference (9IFK), Mar. 24-26, 2014. Aachen, Germany, Vol 1. pp.398-409
  71. Sprengel, M. and Ivantysynova, M. 2014. Investigation and Energetic Analysis of a Novel Blended Hydraulic Hybrid Power Split Transmission. Proceedings of the 9th International Fluid Power Conference (9IFK), Mar. 24-26, 2014. Aachen, Germany, Vol 1. pp.140-151
  72. Sprengel, M., Bleazard, T., Haria, H. and Ivantysynova, M. 2015. Implementation of a Novel Hydraulic Hybrid Powertrain in a Sports Utility Vehicle. Proceedings of the 2014 IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling, Aug. 23-26, 2015. Columbus, OH, USA.
  73. Ramos, I., Sprengel, M. and Ivantysynova, M. 2015. Simulation, Control and Testing of Advanced Hydraulic Hybrid Transmissions. The Summer Undergraduate Research Fellowship (SURF) Symposium, Paper 104. online version
  74. Subramaniam, D., Mizell, D. and Ivantysynova, M. 2015. Application of Ultrasound in the measurement of Lubricant Fluid Film Thickness in the Piston-Cylinder Interface of an Axial Piston Pump. The Summer Undergraduate Research Fellowship (SURF) Symposium, Paper 110. online version
  75. Chawla, P., Jenkins, R. and Ivantysynova, M. 2015. Test Rig Design For Compact Variable Displacement Vane Pump. The Summer Undergraduate Research Fellowship (SURF) Symposium, Paper 120. online version
  76. Busquets, E. and Ivantysynova, M. 2015. Test Bed 1: A Highly Efficient Displacement-Controlled Hydraulic Hybrid Excavator with Pump Switching. Proceedings of the Fluid Power Innovation and Research Conference 2015, Oct. 13-16, 2015. Chicago, IL, USA.
  77. Wondergem, A. and Ivantysynova, M. 2015. The Significance of Piston/Cylinder Surface Shaping on the Performance of Axial Piston Machines. Proceedings of the Fluid Power Innovation and Research Conference 2015, Oct. 13-16, 2015. Chicago, IL, USA.
  78. Banerjee, P. and Ivantysynova, M. 2017. Development of a Torque-based Control Strategy for a Mode-Switching Hydraulic Hybrid Passenger Vehicle. WCX™ 18: SAE World Congress Experience, April 10-12, 2018, Detroit, MI, USA (under review)

Invited Lectures

  1. Water hydraulics - Quo vadis? VDMA Infoveranstaltung. Juni 2000, Frankfurt.
  2. Water hydraulics a challenge & good chance for fluid power in the 21. century. VDMA Infoveranstaltung. November 2002, Frankfurt.
  3. Fluid Power Research & Education at Universities - is there a need to extend and strengthen current activities? NFPA'S 2001 Educators summit. October 2001, Cleveland, USA.
  4. Displacement controlled actuators & drive systems for automotive and other applications. Work shop VDMA. Juni 2002, Frankfurt.
  5. Writing a paper is so easy - but what is the aim? 2nd International FPNI- PhD Symposium Modena, Italy, 2002.
  6. New solutions for energy saving actuators for off road vehicles. 4th Linz Workshop on Key Technologies of Mechatronics. November 2002, Linz, Austria.
  7. Energy saving actuators for mobile manipulators and other applications. VDMA work shop Mechatronic. February 2003. Frankfurt, Germany.
  8. Properties of water have not changed over last 1000 years, but the progress in technology gives new possibilities for use of water in technical systems. VDMA Informationsveranstaltung. June 2003, Frankfurt.
  9. New Actuator Technology for off-road vehicle and other applications. (4th lecture for faculty and graduate students) Technical University of Ostrava, 29 September 2003. Czech Republic.
  10. Diagnostics for Construction Machines. EU-Ibis-MTA-midterm assessment presentation. October 2003, Hamburg, Germany.
  11. Robust control of integrated joint rotary actuator. Speech in praise of Nicolaus Ducat for the Nordmetall Award, November 2003. Hamburg, Germany.
  12. Perspectives on New Directions in Research. 3rd NFPA Educator/Industry Summit, September 30, 2004. Cammelback Inn, Scottsdale, Arizona, USA. - Keynote Lecture
  13. Requirements on Fluid Power Systems for Next Generation of Heavy Duty Mobile Machines. International conference on "Trends in the Development of Heavy Duty Machines", January 17-20, 2005 in Zakopane, Poland.
  14. Maha Fluid Power Research Center - advanced actuator and transmissions by computer aided design of pumps and motors. NFPA webcast presentation, January 26, 2006.
  15. Displacement Control - the solution for fluid power for the next generation of heavy duty machines. ASABE Chicago Section Meeting. January 31, 2007. CNH Virtual Reality Center.
  16. Fluid Power Research Activities in USA. Invited Lecture VDMA. Annual Meeting Fachverband Fluidtechnik, Frankfurt, Germany, June 20-21, 2007.
  17. University - Industry – Collaboration for Organic Growth Through Innnovation. Parker Investor Relation Day, Cleveland, December 5-6, 2007.
  18. IT enabling advancements in Mechanical Engineering. KITARA Seminar, Academia of Finland, September 9, 2008.
  19. Fuel savings through advanced fluid power systems. ICAR Seminar. Clemson University, October 29, 2008
  20. Advanced surface design based on a fully coupled fluid-structure-thermal and multi-body dynamics simulation model for a new generation of pumps and motors. School of Chemical Engineering Dow Graduate Seminar Series, Purdue University, November 11, 2008.
  21. Prius without a battery – an effective way to save fuel and reduce emissions with hydraulic hybrids. 2009 SAE Government/Industry Meeting. Technical Session on Light-Duty Hybrid Vehicle Technologies. Washington, D.C. February 4, 2009.
  22. Hydraulic Hybrid Power Trains - an Opportunity and Challenge for Fluid Power. 7th International Conference on Fluid Power, April 7-10, 2009. Hangzhou, China. - Keynote Lecture
  23. Fuel savings through advanced fluid power systems. 3rd Annual Purdue Systems Integrity for Defense Technology Summit 2010, Purdue University, March 30-31, 2010
  24. Modeling and Optimization of Piston Pumps and Motors. 52nd National Conference on Fluid Power. March 23-25, 2011. Las Vegas, NV. - Keynote Lecture
  25. Displacement control - the future of fluid power systems. 4th ICMEM International Conference on Mechanical Engineering and Mechanics. Aug 10-12, 2011. Suzhou, P. R. China, pp.21-30. - Keynote Lecture
  26. The piston cylinder assembly in piston machines - a long journey of discovery. Proceedings of 8th IFK International Conference on Fluid Power. March 26-28, 2012. Dresden, Germany, Vol.3, pp.307-332. - Keynote Lecture
  27. Prius without a battery – an output coupled powersplit hydraulic hybrid power train. 2012 SAE International Commercial Vehicle Engineering Congress & Exhibition. Rosemont, IL, USA. Invited Panel Session on Hybrids.
  28. Future Technology Focus – Displacement Controlled Actuation. Energy Efficient Hydraulics and Pneumatics Conference, November 27-29, 2012. Chicago, IL, USA - Keynote Lecture
  29. The Secret of the Fluid Film in Piston Machines. The 8th International Conference on Fluid Power Transmission and Control (ICFP 2013), Apr. 9-11, 2013. Hangzhou, China - Keynote Speech
  30. Displacement Control Actuation Future and Challenges of Fluid Power. Beihang University - Workshop on Fluid Power Systems, April 11, 2013. Beijing, China - Keynote Speech
  31. Fuel Savings through Hydraulic Hybrid System Technology. Joint ASABE / SAE Meeting, June 19, 2013. Chicago, IL, USA
  32. Displacement Control & Hydraulic Hybrids - Future of Fluid Power. Evonik Global Hydraulic Segment Meeting, July 9, 2013. Philadelphia, PA, USA
  33. Debate Hydraulic vs. Electric Drive. The 8th FPNI PhD Symposium, June 12, 2014. Lappeenranta, Finland.
  34. From Gutenberg to “Cloud Printing” & from Bramah to ? Faculty Colloquium Series, Purdue University. Febuary 2, 2015.
  35. Quo Vadis Fluid Power? ASME/BATH 2015 Symposium on Fluid Power & Motion Control, October 13, 2015. Chicago, IL, USA - Koski Lecture
  36. Where Are We Going? Research Focus of the CCEFP. Proceedings of the Fluid Power Innovation and Research Conference 2015, Oct. 13-16, 2015. Chicago, IL, USA.
  37. Technologies and Innovations for Hydraulic Pumps. Proceedings of the 10th IFK International Conference on Fluid Power, March 2016, Dresden, Germany Vol. 2, pp. 135-138 Keynote Lecture
  38. How to conduct successful Engineering Research. Invited talk at the graduate school of South China University of Technology, April 26, 2016. Guangzhou, China.
  39. New Energy Efficient Fluid Power Systems and Direction in Pump Design. Invited talk at the Research Colloquium, South China University of Technology, April 27, 2016, Guangzhou, China.
  40. Directions in Fluid Power Research and Technology. “New Trends in Fluid Power” Symposium, June 27, 2016. University of Naples, Italy - Keynote Lecture

Annual Reports

LinkedInMaha on LinkedIn

Maha Fluid Power Research Center
1500 Kepner Drive, Lafayette, IN 47905 USA
Phone: +1 (765) 496-6242
Email: avacca@purdue.edu