2023 PERC Faculty & Staff Publications

Journal Articles/Book Chapters:

C.A. Stevenson, S. Scheirey, J. Monroe, R. Zhang, E. Main, O. Jones, W. Chea, S. Park, B. Nobbe, I. Sura, J. Rimsza, and S.P. Beaudoin, "The effects of surface and particle properties on adhesion in humid environments using the enhanced centrifuge method," Colloids and Surfaces A: Physiochemical and Engineering Aspects, vol. 656, part B, p. 130478, Jan. 2023. Link to abstract.

P.V. Ramachandran and A.A. Alawaed, "Room temperature reduction of titanium tetrachloride-activated nitriles to primary amines with ammonia-borane," Molecules, vol. 28, no. 1, Jan. 2023. Link to article. 

E.W. Plaehn, R.M. Gejji, I.V. Walters, and C.D. Slabaugh, "Equivalent supply pressure for pressure gain estimation in rotating detonation engines," Journal of Propulsion and Power, Vol. 39, no. 1, Jan. 2023. Link to abstract.

B.H. Lee, M.N. Sakano, J.P. Larentzos, J.K. Brennan, and A. Strachan, "A coarse-grain reactive model of RDX: Molecular resoluation at the µm scale," The Journal of Chemical Physics, vol. 158, no. 2, p. 024702, Jan. 2023. Link to abstract.

S. Karumuri, Z.D. McClure, A. Strachan, M. Titus, and I. Bilionis, "Hierarchical Bayesian approach to experimental data fusion: Application to strength prediction of high entropy alloys from hardness measurements," Computational Materials Science, vol. 217, no. 25, p. 111851, Jan. 2023. Link to abstract.

M. Abdallah, B.-G. Joung, W.J. Lee, C. Mousoulis, N. Raghunathan, A. Shakouri, J.W. Sutherland, and S. Bagchi, "Anomaly detection and inter-sensor transfer learning on smart manufacturing datasets," Sensors, vol. 23, no. 1, Jan. 2023. Link to article. 

Y.-H. Liao and S. Zhang, "Semi-global matching assisted absolute phase unwrapping," Sensors, vol. 23, no. 1, Jan. 2023. Link to article.

Conference Presentations/Proceedings:

T. Zhou, J. Gaskins, S. Swaine, S.P. Bane, J. Poggie, and G.A. Blaisdell, "High magnification telecentric background oriented Schilieren (BOS) and its application to a supersonic turbulent boundary layer," in AIAA SciTech Forum, no. 2437, National Harbor, MD, Jan. 2023. Link to video and abstract.

D.J. Londrico, C.J. Schwartz, R.J. Tancin, and C.S. Goldenstein, "A mid-infrared laser absorption spectroscopy diagnostic for measuring air temperature, pressure, and mass flux at 100 kHz via ambient CO₂," in AIAA SciTech Forum, no. 1177, National Harbor, MD, Jan. 2023. Link to video and abstract.

V. Radhakrishna, R.J. Tancin, and C.S. Goldenstein, "Rotational and vibrational temperature measurements of CN Χ²∑⁺ behind shock waves using ultrafast-laser-absorption spectroscopy in the UV," in AIAA SciTech Forum, no. 2087, National Harbor, MD, Jan. 2023. Link to video and abstract.

A.D. Plumadore, A. Satija, V. Radhakrishna, C.S. Goldenstein, M. Chern, C.P. Goyne, C.E. Dedic, and R.P. Lucht, "Development of a flight-ready optical emission spectroscopy sensor for hypersonic flow," in AIAA SciTech Forum, no. 1374, National Harbor, MD, Jan. 2023. Link to video and abstract.

C.J. Schwartz, J. Stiborek, C.S. Goldenstein, A. Butler, D. Chen, and N. Glumac, "Temperature and H2O measurements at 500 kHz in post-detonation fireballs using scanned-wavelength-modulation spectroscopy," in AIAA SciTech Forum, no. 1374, National Harbor, MD, Jan. 2023. Link to video and abstract.

T.W. Teasley, T.M. Fedotowsky, P.R. Gradl, B.L. Austin, and S.D. Heister, "Current state of NASA continuously rotating detonation cycle engine development" in AIAA SciTech Forum, no. 1873, National Harbor, MD, Jan. 2023. Link to video and abstract.

K. Stopka, J. Smallwood, A. Chokshi, S.D. Heister, and M. Sangid, "Structural and fatigue analysis of a rotating detonation rocket engine," in AIAA SciTech Forum, no. 1869, National Harbor, MD, Jan. 2023. Link to video and abstract.

M. Chern, C.E. Dedic, C.P. Goyne, A.D. Plumadore, and R.P. Lucht, "Sensitivity of external emission spectroscopy for hypersonic vehicle control," in AIAA SciTech Forum, no. 1370, National Harbor, MD, Jan. 2023. Link to video and abstract.

Z. Chang, R. Gejji, A. Satija, and R.P. Lucht, "Chirped-probe-pulse femtosecond CARS H₂ thermometry in a high-pressure model rocket combustor, in AIAA SciTech Forum, no. 1931, National Harbor, MD, Jan. 2023. Link to video and abstract.

M. Donoughue, J. Plotzke, and M.S. McClain, "Adhesion of thermoplastic copolymers with hydroxly terminated polybutadiene in application to dissimilar materials 3D printing," in AIAA SciTech Forum, no. 2556, National Harbor, MD, Jan. 2023. Link to video and abstract.

B.G. Harris and M.S. McClain, "Anomaly detection of extrusion-based additive manufacturing," in Joint Mathematics Meetings 2023, Boston, MA, Jan. 2023. Link to abstract.

V. Athmanathan, M. Hoeper, A.M. Webb, R.B. Wang, S. Roy, H.D. Perkins, C.A. Fugger, and T.R. Meyer, "Time resolved visualization of liquid jet interaction with H₂-air rotating detonations using MHz rate diesel PLIF," in AIAA SciTech Forum, no. 0573, National Harbor, MD, Jan. 2023. Link to video and abstract.

K. Patel, A. Saha, A. Satija, T.R. Meyer, and S.P. Bane, "Single-shot time-resolved thermometry of atmospheric-pressure nanosecond pulsed plasma discharges," in AIAA SciTech Forum, no. 2383, National Harbor, MD, Jan. 2023. Link to video and abstract.

R.B. Wang, V. Athmanathan, A.M Webb, S. Patel, J. Braun, Z. Ayers, C.A. Fugger, and T.R. Meyer, "Effects of nitrogen diluation on detonation wave physics in H2-air non-premixed rotating detonation combustors," in AIAA SciTech Forum, no. 1876, National Harbor, MD, Jan. 2023. Link to video and abstract.

B. Burke and J. Poggie, "URANS simulations of inlet-isolator unstart at Mach 4.9," in AIAA SciTech Forum, no. 1467, National Harbor, MD, Jan. 2023. Link to video and abstract.

M.E. Noftz, A.J. Shuck, J.S. Jewell, J. Poggie, A. Bustard, T.J. Juliano, and N.J. Bisek, "Performance evaluation of an internal osculating waverider inlet," in AIAA SciTech Forum, no. 2352, National Harbor, MD, Jan. 2023. Link to video and abstract.

R.A. Beaver, C. White, J. Gabl, and T.L. Pourpoint, "The effect of nitric oxide on the ignition delay of mixed oxides of nitrogen with monomethylhydrazine," in AIAA SciTech Forum, no. 1475, National Harbor, MD, Jan. 2023. Link to video and abstract.

S.T. McNaughton, C. White, J. Gabl, and T.L. Pourpoint, "Surface tension measurements of mixed oxides of nitrogen using capillary tubes," in AIAA SciTech Forum, no. 1477, National Harbor, MD, Jan. 2023. Link to video and abstract.

M.R. Orth, T.L. Pourpoint, and B. Bullard, "Coating techniques for 3D printed catalyst beds," in AIAA SciTech Forum, no. 1836, National Harbor, MD, Jan. 2023. Link to video and abstract.

C. White, A. Benhidjeb-Carayon, J. Gabl, and T.L. Pourpoint, "Density characterization of mixed oxides of nitrogen from freezing point to 50^oC, in AIAA SciTech Forum, no. 1476, National Harbor, MD, Jan. 2023. Link to video and abstract.

C. White, S.T. McNaughton, J. Gabl, and T.L. Pourpoint, "Speed of sound characterization of mixed oxides of nitrogen from freezing point to 50^oC," in AIAA SciTech Forum, no. 1261, National Harbor, MD, Jan. 2023. Link to video and abstract.

C. Yilmaz and T.L. Pourpoint, "Performance evaluation of a diffuser-ejector system using cold gas thrusters with different nozzle geometries in the Purdue Altitute Chamber Facility,"  in AIAA SciTech Forum, no. 1667, National Harbor, MD, Jan. 2023. Link to video and abstract.

B.L. Bemis, J.L. Brun, C.T. Wanstall, J.L. Hill, M.P. Borg, J.J. Redmond, M. Ruggeri, K. Jantze, C. Scalo, and C.L. Running, "Ultrasonically absorptive silicon-carbide foam for boundary-layer control," in AIAA SciTech Forum, no. 0096, National Harbor, MD, Jan. 2023. Link to video and abstract.

T. Toki, V.C. Sousa, Y. Chen, and C. Scalo, "Direct-numerical and large-eddy simulations of hypersonic turbulent couette flow at Mach 6, 7 and 8," in AIAA SciTech Forum, no. 0865, National Harbor, MD, Jan. 2023. Link to video and abstract.

K. Dille, M. Frederick, C.D. Slabaugh, and S.D Heister, "Time-resolved stagnation pressure measurement technique in a rotating detonation rocket combustor," in AIAA SciTech Forum, no. 1871, National Harbor, MD, Jan. 2023. Link to video and abstract.

N. Blackwell, A.M. Webb, C. Crabtree, M. Slipchenko, T.R. Meyer, and J.S. Jewell, "Development of kHz-rate CO laser-induced fluorescence in high speed flows," in AIAA SciTech Forum, no. 2336, National Harbor, MD, Jan. 2023. Link to video and abstract.

E. Braun, J. Crosmer, D. Ritchie, N. Kiefer, J. Braun, G. Paniagua, M. Slipchenko, and T.R. Meyer, "Joint temperature and velocity statistics in high-speed flows using simultaneous CARS thermometry and FLEET velocimetry," in AIAA SciTech Forum, no. 0221, National Harbor, MD, Jan. 2023. Link to video and abstract.

S.P. Kearney, K.P. Lynch, K. Daniel, E. Jans, C. Downing, J.L. Wagner, A.M Webb, C. Crabtree, and M. Slipchenko, "Burst-mode planar laser-induced fluorescence of nitric oxide in the Sandia Free-Pistion Shock Tunnel, in AIAA SciTech Forum, no. 0403, National Harbor, MD, Jan. 2023. Link to video and abstract.

A. Patel, X. Wang, A. Ranjan, M. Slipchenko, S.O. Macheret, M.N. Shneider, and A. Shashurin, "Electron momentum-transfer collision frequency measurements in small plasma objects via phase information from constructive elastic microwave scattering," in AIAA SciTech Forum, no. 1862, National Harbor, MD, Jan. 2023. Link to video and abstract.

A.M. Webb, C. Crabtree, V. Athmanathan, M. Slipchenko, and T.R. Meyer, "KTP optical parametric oscillator for extended duration high repetation rate NO planar laser induced fluroescence," in AIAA SciTech Forum, no. 0404, National Harbor, MD, Jan. 2023. Link to video and abstract.

D.K. Messer, C.T. Nunes, T.A. Hafner, and S. Son, "Altering the burning rate of a propellant with shape memory alloy," in AIAA SciTech Forum, no. 2691, National Harbor, MD, Jan. 2023. Link to video and abstract.

E. Westphal, L.E. Hansen, S. Son, T.R. Meyer, and C. Winters, "Lifetime-based phosphor thermometry via X-ray Excitation," in AIAA SciTech Forum, no. 0410, National Harbor, MD, Jan. 2023. Link to video and abstract.

2022 PERC Faculty & Staff Publications

Journal Articles/Book Chapters:

H. Ke, A. Loaiza, A.G. Jimenez, D.F. Bahr, and I. Mastorakos, “A multiscale simulation approach for the mechanical response of copper/nickel nanofoams with experimental validation,” Journal of Engineering Materials and Technology, vol. 144, no. 1, p. 011011, Jan. 2022. Link to abstract.

S.-H. Hsu, T. Chi, J. Kim, P. Somers, B.W. Boudouris, X. Xu, and L. Pan, "High-speed one-photon 3D nanolithography using controlled initiator depletion and inhibitor transport," Advanced Optical Materials, vol. 10, no. 4, p. 2102262, Feb. 2022. Link to abstract. 

J.A. Ouimet, J. Xu, C. Flores-Hansen, W.A. Phillip, and B.W. Boudouris, "Design considerations for next-generation polymer sorbents: From polymer chemistry to device configurations," Macro-Molecular Chemistry and Physics, vol. 223, no. 16, p. 2200032, Aug. 2022. Link to article.

A.B. Woeppel, J. Schaefer, H.J. Kim, B.W. Boudouris, and S.P. Beaudoin, "Ion-selective organic electrochemical transistor sensors using molecularly imprinted polymers," ACS Applied Polymer Materials, vol. 4, no. 9, pp.6667-6674, Aug. 2022. Link to abstract.

S. Zhang, M. Pink, T. Junghoefer, W. Zhao, S.-N. Hsu, S. Rajca, A. Calzolari, B.W. Boudouris, M.B. Casu, and A. Rajca, "High-spin (S = 1) blatter-based diradical with robust stability and electrical conductivity," Journal of American Chemical Society, vol. 144, no. 13, pp. 6059-6070, March 2022. Link to abstract.

C.B. Finfrock, B. Ellyson, C.G. Becker, J. Copley, K. Fezzaa, N. Parab, T. Sun, C. Kirk, N. Kedir, W. Chen, A. Clarke, and K. Clarke, "Resolving the martensitic transformation in Q&P steels in-situ at dynamic strain rates using synchrotron X-ray diffraction," Metallurgical and Materials Transactions A, Aug. 2022. Link to abstract.

J. Gao, K. Fezzaa, and W. Chen, "Multiscale dynamic experiments on fiber-reinforced composites with damage assessment using high-speed synchrotron X-ray phase-contrast imaging," NDT & E International, vol. 129, no. 102636, July 2022. Link to abstract.

J. Gao, N. Kedir, and W. Chen, "Characterization of failure of single carbon nanotube fibers under extreme transverse loading," Materials & Design, vol. 215, no. 110482, March 2022. Link to abstract.

J. Gao, N. Kedir, J.A. Hernandez, J. Gao, T. Horn, G. Kim, K. Fezzaa, T.N. Tallman, G. Palmese, R. Sterkenburg, and W. Chen, "Dynamic fracture of glass fiber-reinforced ductile polymer matrix composites and loading rate effect," Composites Part B: Engineering, vol. 235, no. 109754, April 2022. Link to abstract.

J. Gao, N. Kedir, J.A. Hernandez, F. Zhou, J.-T. Tsai, T.N. Tallman, M.B.-G. Jun, and W. Chen, "Dynamic failure of composite strips under reverse ballistic impact," International Journal of Mechanical Sciences, vol. 234, no. 107700, Nov. 2022, Link to abstract.

J. Gao, N. Kedir, B.H. Lim, Y. Nie, X. Zhai, and W. Chen, "Transverse loading on single high-performance fibers by round-head indenters and the fibers' failure visualization," Fibers, vol. 10, no. 6, May 2022. Link to abstract.

M. Sannamani, J. Gao, W. Chen, and T.N. Tallman, "Damage detection in non-planar carbon fiber-reinforced polymer laminates via electrical impedance tomography with surface-mounted electrodes and directional sensitivity matrices," Composites Science and Technology, vol. 224, no. 109429, June 2022. Link to abstract.

X. Zhang, J. Gao, D.J. O’Brien, W. Chen, and S. Ghosh, “Parametrically-upscaled continuum damage mechanics (PUCDM) model for multiscale damage evolution in bending experiments of glass-epoxy composites,” Composites Part B: Engineering, vol. 228, no. 109409, Jan. 2022. Link to abstract.

I. Childres, Y. Qi, M.A. Sadi, J.F. Ribeiro, H. Cao, and Y.P. Chen, "Combined Raman spectroscopy and magneto-transport measurements in disordered graphene: Correlating Raman D band and weak localization features," Coatings, vol. 12, no. 8, p. 1137, Aug. 2022. Link to abstract.

X. Xu, A.B. Solanki, D. Sychev, X. Gao, S. Peana, A.S. Baburin, K. Pagadala, Z.O. Martin, S.N. Chowdhury, Y.P. Chen, T. Taniguchi, K. Watanabe, I.A. Rodionov, A.V. Kildishev, T. Li, P. Upadhyaya, A. Boltasseva, and V.M. Shalaev, "Greatly enhanced emission from spin defects in hexagonal boron nitride enabled by a low-loss plasmonic nanocavity," Nano Letters, vol. 23, no. 1, pp. 25-33, Nov. 2022. Link to abstract.

C. Cheng, Y.J. Moon, J.Y. Hwang, G. T.-C. Chiu, and B. Han, "A scaling law of particle transport in inkjet-printed particle-laden polymeric drops," International Journal of Heat and Mass Transfer, vol. 191, no. 1, p. 122840, Aug. 2022. Link to abstract.

D.N. Collard, K.E. Uhlenhake, M. Ornek, J.F. Rhoads, and S.F. Son, "Photoflash and laser ignition of AL/PVDF films and additvely manufactured igniters for solid propellant," Combustion and Flame, vol. 244, Oct. 2022, no. 112252, Oct. 2022. Link to abstract.

J. Fan, N. Deneke, S. Xu, B. Newell, J. Garcia, C. Davis, W. Wu, R.M. Voyles, and R.A. Nawrocki, "Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials," Additive Manufacturing, vol. 60, part A, p. 103248, Dec. 2022. Link to abstract.

A.R. Range, N.R. McMindes, J. Morris, B.A. Geesey, and J.F. Rhoads, “The thermomechanics of particulate composite mock energetic materials in response to high-frequency (1-100 kHz) excitation,” Journal of Applied Physics, vol. 131, no. 045103, Jan. 2022. Link to abstract.

H. Tao, F. Danzi, C.E. Silva, and J.M. Gibert, "Heterogeneous digital stiffness programming," Extreme Mechanics Letters, vol. 55, no. 101832, Aug. 2022. Link to article. 

M. Gu, S. Wang, G. Wang, Q. Wang, X. Liu, F. Qi, and C.S. Goldenstein, "Improved laser absorption spectroscopy measurements of flame temperature via a collisional line-mixing model for CO₂ spectra near 4.17 µm," Applied Physics B, vol. 128, no. 128, June 2022. Link to abstract.

V. Radhakrishna, R.J. Tancin, and C.S. Goldenstein, "Broadband ultrafast-laser-absorption imaging in the ultraviolet for spatiotemporally resolved measurements of temperature and CN," Applied Physics Letters, vol. 121, no. 031105, July 2022. Link to abstract.

A. Agarwal and M. Gonzalez, “A finite-deformation constitutive model of particle-binder composites incorporating yield-surface-free plasticity,” Journal of Applied Mechanics, vol. 89, no. 2, p. 021002, Feb. 2022. Link to abstract.

S. Bachawala and M. Gonzalez, "Development of mechanistic reduced order models (ROMs) for glidant and lubricant effects in continuous manufacturing of pharmaceutical solid-dosage forms," Computer Aided Chemical Engineering, vol. 51, pp. 1129-1134, 2022. Link to abstract.

N. Ghods, P. Poorsolhjouy, M. Gonzalez, and S. Radl, “Discrete element modeling of strongly deformed particles in dense shear flows,” Powder Technology, vol. 401, no. 117288, March 2022. Link to abstract.

Y.-S. Huang, M.Z. Sheriff, S. Bachawala, M. Gonzalez, Z. Nagy, and G.V. Reklaitis, "Application of MHE-based NMPC on a rotary tablet press under plant-model mismatch," Computer Aided Chemical Engineering, vol. 49, pp. 2149-2154, 2022. Link to abstract. 

R.B. Lagare, M.Z. Sheriff, M. Gonzalez, Z. Nagy, and G.V. Reklaitis, "A comprehensive framework for the modular development of condition monitoring systems for a continuous dry granulation line," Computer Aided Chemical Engineering, vol. 49, pp. 1543-1548, 2022. Link to abstract.

P.H.C. Martins and M. Gonzalez, "A process-based pore network model construction for granular packings under large plastic deformations," Transport in Porous Media, vol. 42, July 2022. Link to abstract.

R. Moheimani, M. Gonzalez, and H. Dalir, “An integrated nancomposite proximity sensor: Machine learning-based optimization, simulation, and experiment,” Nanomaterials, vol. 12, no. 8, p. 1269, April 2022. Link to abstract.

S.M. Razavi, B. Yohannes, R. Singh, M. Gonzalez, H.P. Lee, F.J. Muzzio, and A.M.Cuitino, "Chapter 8 - Continuous tableting," in How to Design and Implement Powder-To-Tablet Continuous Manufacturing Systems, F.J. Muzzio and S. Oka, Eds., Academic Press, 2022. Link to chapter.

Y.-S. Huang, S. Medina-Gonzalez, B. Straiton, J. Keller, Q. Marashdeh, M. Gonzalez, Z. Nagy, and G.V. Reklaitis, "Real-time monitoring of powder mass flowrates for plant-wide control of a continuous direct compaction tablet manufacturing process," Journal of Pharmaceutical Sciences, vol. 111, no. 1, pp. 69-81, Jan. 2022. Link to abstract.

A.G. Martinez and S.D. Heister, "Wave structure of heterogeneous detonations at high operating pressures," Combustion Science and Technology, Aug. 2022. Link to abstract.

S.D. Heister, J. Smallwood, A. Harroun, K. Dille, A. Martinez, and N. Ballintyn, "Rotating detonation combustion for advanced liquid propellant space engines," Aerospace, vol. 9, no. 10, p. 581, Oct. 2022. Link to article.

D. Ding, E. Feng, R.R. Kotha, N.C. Chapman, H. Jiang, J.J. Nash, and H.I. Kenttamaa, "Spin-spin coupling controls the gas-phase reactivity of aromatic σ-type triradicals, Chemistry - A European Journal, vol. 28, no. 1, 2022. Link to article.

X. Ma, M. Rohdenburg, H. Knorke, S. Kawa, J.K.-Y. Liu, E. Apra, K.R. Asmis, V.A. Azov, J. Laskin, C. Jenne, H.I. Kenttamaa, and J. Warneke, "Binding of saturated and unsaturated C6-hydrocarbons to the electrophilic anion [B12Br11]−: A systematic mechanistic study," Physical Chemistry Chemical Physics, vol. 36, 2022. Link to abstract. 

C.J. Blum-Sorensen, C.A. Duarte, J.D. Drake, N.E. Kerschen, K. Fezzaa, M. Koslowski, W. Chen, and S. F. Son, "Phase contrast X-ray imaging of the collapse of an engineered void in single-crystal HMX," Propellants, Explosives, Pyrotechnics, vol. 47, no. 10. Oct. 2022. Link to abstract. 

O. Sen, C.A. Duarte, N.K. Rai, M. Koslowski, and H.S. Udaykumar, "An Eulerian crystal plasticity framework for modeling large anisotropic deformations in energetic materials under shock," Journal of Applied Physics, vol. 132, no. 18, Nov. 2022. Link to abstract.

A. Satija and R.P. Lucht, "Simultaneous temperature and pressure measurements in compressible flow using nanosecond O₂ Coherent Anti-Stokes Raman spectroscopy," Applied Spectroscopy, vol. 76, no. 5, pp. 541-547, July 2022. Link to abstract.

D. Shin, A. Satija, and R.P. Lucht, “Spray characteristics of standard and alternative aviation fuels at high ambient pressure conditions,” Experimental Thermal and Fluid Science, vol. 130, no. 110511, Jan. 2022. Link to abstract.

J.E. Zuckerman, T.D. Manship, D.M. Smith, and D.G. Piercey, "Synthesis of 5-nitrotetrazolate via the aqueous oxidation of 5-aminotetrazole," Organic Process Research & Development, vol. 26, no. 5, pp. 1360-1364, May 2022. Link to abstract. 

K. Nakata, K. Ota, K. Ishihara, K. Goto, N. Itouyama, H. Watanabe, A. Kawasaki, K. Matsuoka, J. Kasahara, A. Matsuo, I. Funaki, K. Higashino, J. Braun, T. Meyer, and G. Paniagua, "Supersonic exhaust from a rotating detonation engine with throatless diverging channel," AIAA Journal, vol. 60, no. 7, July 2022. Link to abstract.

K. Patel, A. Saha, T. Zhou, T.R. Meyer, S.P.M. Bane, and A. Satija, “Spectrally filtered ps-ns emission dynamics of atmospheric-pressure nanosecond pulsed plasmas,” Applied Physics Letters, vol. 120, no. 1, Jan. 2022. Link to abstract.

N.S. Rodrigues, A.D. Brown, T.R. Meyer, and R.P. Lucht, “0.1-5 MHz ultrahigh-speed gas density distributions using digital holographic interferometry,” Applied Optics, vol. 61, no. 1, pp. 28-34, Jan. 2022. Link to abstract.

P.A.N. Aye-Addo, G. Paniagua, D.G. Cuadrado, L. Bhatnagar, A.C. Sauca, J. Braun, M. Gomez, T.R. Meyer, and M. Bloxham, “Development of a lifetime pressure sensitive paint procedure for high-pressure vane testing,” Journal of Turbomachinery, vol. 144, no. 5, p. 051005, May 2022 (In Progress). Link to abstract.

W. Shang, M. Gomez, T.R. Meyer, and J. Chen, “Reconstruction of ligaments and droplets via multi-view digital inline holography,” Journal of Fluids Engineering, Accepted Manuscript. Link to abstract.

M. Ornek, K.E. Uhlenhake, Y. Zhou, B. Zhang, M. Kalaswad, D.N. Collard, H. Wang, Q. Wang, and S.F. Son, “Preparation and characterization of multifunctional piezoenergetic polyvinylidene fluoride/aluminum nanocomposite films,” Journal of Applied Physics, vol. 131, no. 5, p. 055108, Feb. 2022. Link to abstract.

S.E. Creegan, J.K. Lee, M. Zeller, E.F.C. Byrd, and D.G. Piercey, "Energetic triazinium salts from N-amination of 3,5-diamino-6-nitro-1,2,4-triazine," Energetic Material Frontiers, vol. 3, no. 3, pp. 128-136, Sept. 2022. Link to abstract.

S.E. Creegan, M. Zeller, E.F.C. Byrd, and D.G. Piercey, "Titanium superoxide for the oxidation of amines: Synthesis of bis(3-nitro-1 H-1,2,4-triazol-5-yl)methane and its metal salts," Journal of Inorganic and General Chemistry, vol. 648, no. 11, p. e202200007, June 2022. Link to abstract.

M. Thoenen, M. Gettings, C. Holt, A.J. Frontier, P.A. Caruana, M. Zeller, E.F.C. Byrd, and D.G. Piercey, "Approach to high-nitrogen materials with dual-use properties via tetraaza-nazarov cyclization," Inorganic Chemistry, vol. 61, no. 45, pp. 18095-18101, Nov. 2022. Link to abstract.

D.R. Wozniak, M. Zeller, E.F.C. Byrd, and D.G Piercey, “An improved synthesis of bromotetrazole,” Journal and Inorganic and General Chemistry, vol. 648, no. 2, Jan. 2022. Link to abstract.

S.R. Yocca, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “1,5-diaminotetrazole-4N-oxide (SYX-9): A new high-performing energetic material with a calculated detonation velocity over 10 km s^-1,” Journal of Materials Chemistry A, vol. 10, no. 4, pp. 1876-1884, Jan. 2022. Link to abstract.

S.R. Yocca and D.G. Piercey, "Optimized method to achieve 1-hydroxy-5-aminotetrazole (HAT)," Organic Process Research & Development, vol. 26, no. 8, pp. 2403-2406, June 2022. Link to abstract.

R. Alviani, D. Fano, J. Poggie, and G. Blaisdell, "Aerodynamic heating in the gap between a missle body and a control fin," Journal of Spacecraft and Rockets, vol. 59, no. 4, July 2022. Link to abstract.

R. Alviani, D. Fano, J. Poggie, and G. Blaisdell, "Unsteady aspects of shock-wave/boundary-layer interaction resulting from control surface deflection," AIAA Journal, vol. 60, no. 8, Aug. 2022. Link to abstract.

H. Ngoh and J. Poggie, "Detached eddy simulation of blunt-fin-induced shock-wave/boundary-layer interaction," AIAA Journal, vol. 60, no. 4, April 2022. Link to abstract.

H. Ngoh and J. Poggie, "Forced separation unsteadiness in a supersonic blunt fin flow," Physical Review Fluids, vol. 7, no. 9, p. 093903, Sept. 2022. Link to abstract.

V.M. Boulos, J. Marcum, H.R. Lei, Y. Zhang, H.E. Natvig, B. Updike, T.L. Pourpoint, H.I. Kenttamaa, "Detection of the tetrahedral reaction intermediate of the reaction of acetyl chloride with ethnaol in microdroplets via lser desorption/ionization tandem mass spectrometry," Physical Chemistry Chemical Physics, vol. 24, no. 40, pp. 24690-24694, Sep. 2022. Link to abstract.

P.M. Piper, R.M. Orth, D.Y. Zemlyanov, and T.L. Pourpoint, “Carbonaceous deposits in a fuel-film cooled rocket combustor: Spectroscopy,” Carbon, vol. 187, pp. 173-186, Feb. 2022. Link to abstract.

P.M. Piper and T.L. Pourpoint, “Carbonaceous deposit density in a fuel-film-cooled rocket combustor,” Journal of Propulsion and Power, Feb. 2022 (In Progress). Link to article.

A. Benhidjeb-Carayon, J.R. Gabl, B.E. Whitehead, and T.L. Pourpoint, “Hypergolic hybrid rocket engine ignition and relights with mixed oxides of nitrogen,” Journal of Propulsion and Power, vol. 38, no. 1, Jan. 2022. Link to abstract.

P.V. Ramachandran, A.A. Alawaed, and H.J. Hamann, "TiCl₄-catalyzed hydroboration of ketones with ammonia borane," Journal of Organic Chemistry, vol. 87, no. 19, pp.13259-13269, Sep. 2022. Link to abstract.

P.V. Ramachandran, A.A. Alawaed, and H.J. Hamann, "A safer reduction of carboxylic acids with titanium catalysis," Organic Letters, vol. 24, no. 46, pp. 8481-8486, Nov. 2022. Link to abstract.

P.V. Ramachandran and S. Choudhary, "Monotrifluoroacetoxyborane-amines: Chemoselective reagents for challenging reductive aminations," Chemical Communications, vol. 58, no. 84, Sep. 2022. Link to abstract.

P.V. Ramachandran, H.J. Hamann, and S. Mishra, "Aminoboranes via tandem iodination/dehydroiodination for one-pot borylation," ACS Omega, vol. 7, no. 16, pp. 14377-14389, April 2022. Link to abstract.

A. Afriat, J.S. Bach, I. Gunduz, J.F. Rhoads, and S.F. Son, "Comparing the capabilities of vibration-assisted printing (VAP) and direct-write additive manufacturing techniques," The International Journal of Advanced Manufacturing Technology, no. 121, pp. 8231-8241, Aug. 2022. Link to abstract.

N.C. Iovanac, R. MacKnight, and B.M. Savoie, "Actively searching: Inverse design of novel molecules with simultaneously optimized properties," Journal of Physical Chemistry A, vol. 126, no. 2, pp. 333-340, Jan. 2022. Link to abstract.

A. Khot and B.M. Savoie, "How side-chain hydrophilicity modulates morphology and charge transport in mixed conducting polymers," Journal of Polymer Science, vol. 60, no. 3, pp. 610-620, Feb. 2022. Link to abstract.

Y. Tan, S.-N. Hsu, H. Tahir, L. Dou, B.M. Savoie, and B.W. Boudouris, “Electronic and spintronic open-shell macromolecules, quo vadis?,” Journal of American Chemical Society, vol. 144, no. 2, pp. 626-647, Jan. 2022. Link to abstract.

Q. Zhao, H.-H. Hsu, and B.M. Savoie, "Conformational sampling for transition state searches on a computational budget," Journal of Chemical Theory and Computation, vol. 18, no. 5, pp. 3006-3016, April 2022. Link to abstract. 

T. Buschhagen, R.M. Gejji, C. Scalo, and C.D. Slabaugh, "Self-excited instability regimes of a confined turbulent jet flame at elevated pressure," Physics of Fluids, vol. 34, no. 044103, April 2022. Link to abstract.

H. Hao, C. Scalo, and F. Semperlotti, "On the use of negative thermal expansion engineered structures in flexural-mode solid-state thermoacoustics," Journal of Sound and Vibration, vol. 538, no. 10, p. 117223, Nov. 2022. Link to abstract.

M. Hwang, C. Scalo, and A.F. Arrieta, "High-performance large-scale simulation of multi-stable metastructures," Computer Physics Communications, vol. 277, no. 108365, Aug. 2022. Link to abstract.

V.C.B. Sousa and C. Scalo, "A unified Quasi-Spectral-Viscosity (QSV) approach to shock capturing and large-eddy simulation," Journal of Computational Physics, vol. 459, no. 1111139, June 2022. Link to abstract.

V.C.B. Sousa and C. Scalo, "A Legendre spectral viscosity (LSV) method applied to shock capturing for high-order flux reconstruction schemes," Journal of Computational Physics, vol. 460, no. 111157, Jul 2022. Link to abstract.

W. Farlessyost and S. Singh, "Reduced order dynamical models for complex dynamics in manufacturing and natural systems using machine learning," Nonlinear Dynamics, vol. 110, pp. 1613-1631, Aug. 2022. Link to abstract.

Z.M. Ayers, A. Lemcherfi, E.W. Plaehn, R.M. Gejji, H.D. Perkins, S. Roy, C.D. Slabaugh, T.R. Meyer, and C.A. Fugger, "Simultaneous 100-kHz acetone planar laser-induced fluorescence and OH* cheiluminescence in a linear non-premixed detonation channel," Combustion and Flame, vol. 244, no. 112209, Oct. 2022, Link to abstract.

M.D. Frederick, R.M. Gejji, J.E. Shephard, and C.D. Slabaugh, "Time-resolved imaging of the cellular structure of methane and natural gas detonations," Shock Waves, vol. 32, pp. 337-351, May 2022. Link to abstract.

V. Athmanathan, J. Braun, Z.M. Ayers, C.A. Fugger, A.M. Webb, M.N. Slipchenko, G. Paniagua, S. Roy, and T.R. Meyer, “On the effects of reactant stratification and wall curvature in non-premixed rotating detonation combustors,” Combustion and Flame, vol. 240, no. 112013, June 2022 (In Progress). Link to abstract.

E.L. Braun, M.N. Slipchenko, S. Roy, and T.R. Meyer, "Spatially multiplexed femtosecond/picosecond coherent anti-Stokes Raman scattering for multipoint array measurements," Optics Letters, vol. 47, no. 20, pp. 5280-5283, Oct. 2022. Link to abstract.

M.N. Slipchenko and J.-X. Cheng, “Multiplex stimulated Raman scattering microscopy via a tuned amplifier,” Stimulated Raman Scattering Microscopy: Techniques and Applications, J.-X. Cheng, W. Min, Y. Ozeki, and D. Polli, Eds. Cambridge, MA, USA: Elsevier, 2022, ch. 6, pp. 91-98. Link to abstract.

A.R. Patel, X. Wang, E.L. Braun, A. Ranjan, M.N. Slipchenko, S. Macharet, M.N. Shneider, and A. Shashurin, "Electron momentum-transfer collision frequency measurements in small plasma objects via coherent microwave scattering," Plasma Sources Science and Technology, vol. 31, no. 111, p. 114011, Nov. 2022. Link to abstract.

M.J. Abere, M.T. Beason, R.V. Reeves, M.A. Rodriguez, P.G. Kotula, C.E. Sobczak, S.F. Son, C.D. Yarrington, and D.P. Adams, "The growth and nanothermite reaction of 2Al/3NiO multilayer thin films," Journal of Applied Physics, vol. 132, no. 035305, July 2022. Link to abstract.

M.J. Baier, C.M. Jarocki, A.R. Noel, and S.F. Son, "Performance enhancement and ignition delay suppression of TMEDA using amine-borane additives," International Journal of Energetic Materials and Chemical Propulsion, vol. 21, no. 3, pp. 77-91, 2022. Link to abstract.

M. Gomez, S.J. Grauer, J. Ludwigsen, A.M. Steinberg, S.F. Son, S. Roy, and T.R. Meyer, “Megahertz-rate background-oriented schlieren tomography in post-detonation blasts,” Applied Optics, vol. 61, no. 10, Mar. 2022, pp. 2444-2458. Link to abstract.

J.C.S. McCaw, T.J. Fleck, V. Tejada-Ortigoza, B. Patel, S.F. Son, I.E. Gunduz, O. Campanella, and J.F. Rhoads, "Vibration-assisted printing of highly viscous food," Additive Manufacturing, vol. 56, no. 102851, Aug. 2022. Link to abstract.

M.D. Ruesch, G.C. Mathews, R.J. Tancin, S.F. Son, and C.S. Goldenstein, "Wavelength-modulation spectroscopy in the mid-infrared for temperature and HCl measurements in aluminum-lithium composite-propellant flames," Combustion and Flame, vol. 242, no. 112180, Aug. 2022. Link to abstract.

Z.A. Roberts, S.F. Son, and J.F. Rhoads, “Direct observations of ultrasonically generated hot spots in polymer composite energetic materials,” Combustion and Flame, vol. 235, no. 111704, Jan. 2022. Link to abstract.

D.K. Messer, J.H. Shin, M. Ornek, T.A. Hafner, M. Zhou, and S.F. Son, "Effects of flexoelectric and piezoelectric properties on the impact-driven ignition sensitivity of P(VDF-TrFE)/nAL films," Combustion and Flame, vol. 242, no. 112181, Aug. 2022. Link to abstract.

J.H. Shin, D.K. Messer, M. Ornek, S.F. Son, and M. Zhou, "Dielectric breakdown driven by flexoelectric and piezoelectric charge generation as hotspot ignition mechanism in aluminized fluoropolymer films," Journal of Applied Physics, vol. 132, no. 085101, Aug. 2022. Link to abstract.

K. Uhlenhake, O.R. Yehia, A. Noel, B.C. Terry, M. Ornek, H.M. Belal, I.E. Gunduz, and S.F. Son, "On the use of fluorine-containing nano-aluminum composite particles to tailor composite solid rocket propellants," Propellants, Explosives, Pyrotechnics, vol. 47, no. 7, July 2022. Link to abstract.

D.E. Farache, J.C. Verduzco, Z.D. McClure, S. Desai, and A. Strachan, "Active learning and molecular dynamics simulations to find high melting temperature alloys," Computational Materials Science, vol. 209, no. 111386, June 2022. Link to abstract.

M.S. Farnell, Z.D. McClure, S. Tripathi, and A. Strachan, "Modeling environment-dependent atomic-level properties in complex-concentrated alloys," The Journal of Chemical Physics, vol. 156, no. 114102, March 2022. Link to abstract.

C. Li and A. Strachan, "Shock-induced collapse of porosity, mapping pore size and geometry, collapse mechanism, and hotspot temperature," Journal of Applied Physics, vol. 132, no. 065901, Aug. 2022. Link to abstract.

B.W. Hamilton, M.P. Kroonblawd, and A. Strachan, "Extemporaneous mechanochemistry: Shock-wave-induced ultrafast chemical reactions due to intramolecular strain energy," Journal of Physical Chemistry Letters, vol. 13, no. 29, pp. 6657-6663, July 2022. Link to abstract.

C. Li, B.W. Hamilton, T. Shen, L. Alzate, and A. Strachan, “Systematic builder for all-atom simulations of plastically bonded explosives,” arXiv:2202.01923, Jan. 2022. Link to abstract.

J. Macatangay, B.W. Hamilton, and A. Strachan, "Deviatoric stress driven transiet melting below the glass transition temperature in shocked polymers," Journal of Applied Physics, vol. 132, p.035901, July 2022. Link to abstract.

S. Mishra, K.G. Vishnu, and A. Strachan, "Comparing the accuracy of melting temperature prediction methods for high entropy alloys," Journal of Applied Physics, vol. 132, no. 205901, Nov. 2022. Link to abstract.

S. Tripathi, K.G. Vishnu, M.S. Titus, and A. Strachan, “Uncovering the role of nanoscale precipitates on martensitic transformation and superelasticity,” Acta Materialia, vol. 229, no. 117790, May 2022. Link to abstract.

M.J. Triebe, F. Zhao, and J.W. Sutherland, “Modeling the effect of slide table mass on machine tool energy consumption: The role of lightweighting,” Journal of Manufacturing Systems, vol. 62, pp. 668-680, Jan. 2022. Link to abstract.

Y. Zhang, Li Li, W. Liu, Lingling Li, Y. Gao, W. Cai, and J.W. Sutherland, “Dynamics analysis and energy consumption modelling based on bond graph: Taking the spindle system as an example,” Journal of Manufacturing Systems, vol. 62, pp. 539-549, Jan. 2022. Link to abstract.

H. Wu, A. Huang, and J.W. Sutherland, “Layer-wise relevance propagation for interpreting LSTM-RNN decisions in predictive maintenance,” The International Journal of Advanced Manufacturing Technology, vol. 118, no. 3-4, pp. 963-978, Jan. 2022. Link to abstract.

J. Zhao, L. Li, C. Li, J.W. Sutherland, and L. Li, "Energy-aware sub-regional milling method for free-form surface based on clustering features," Journal of Manufacturing Processes, vol. 84, pp. 937-952, Dec. 2022. Link to abstract.

R. Chen, J. Xu, and S. Zhang, “Comparative study on 3D optical sensors for short range applications,” Optics and Lasers in Engineering, vol. 149, no. 106763, Feb. 2022. Link to abstract.

L. Chen, X. Hu, and S. Zhang, “Calibration method for an extended depth-of-field microscopic structured light system,” Optics Express, vol. 30, no. 1, pp. 166-178, Jan. 2022. Link to abstract.

S. Zhang, "Pixel-wise structured light calibration method with a color calibration target" Optics Express, vol. 30, no. 20, pp. 35817-35827, Sept. 2022. Link to abstract.

Conference Presentations/Proceedings:

A. Burch, H.P. Grennan, D.F. Bahr, J.D. Yeager, M.J. Cawkwell, and V.W. Manner, "Investigating correlations between explosive impact sensitivity and mechanical properties using nanoindentation," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

X. Wang, A. Patel, S.P.M Bane, and A. Shashurin, “Experimental study of nanosecond atmospheric pin-to-pin discharges in single-pulsed and repetitively-pulsed modes,” in AIAA SciTech 2022 Forum, no. 2367, Jan. 2022. Link to video and abstract.

A. Woeppel, B.W. Boudouris, and S. Beaudoin, "Understanding coupled transport in semiconducting polymers for analysis of energetic trace materials," in Bulletin of the American Physical Society, vol. 67, no. 3, March 2022. Link to abstract. 

Y. Tan, B.W. Boudouris, and B.M. Savoie, "Predicting molecular charge transport in radical polymers," in APS March Meeting, March 2022. Link to abstract.

Y. Tan, B.W. Boudouris, and B.M. Savoie, "The modular design of charge transport in radical polymers," in AlChE 2022 Annual Meeting, no. 404c, Phoenix, AZ, Nov. 2022. Link to abstract.

J. Gao, G. Kim, and W. Chen, "Dynamic behavior of fiber-reinforced composites under triaxial compression," in Proceedings of the American Society for Composities Thirty-Seventh Technical Conference, Sept. 2022. Link to abstract.

X. Wang, A. Saha, Y. Mi, A. Shakouri, M.A. Alam, G.T.C. Chiu, and J.P. Allebach, "Thin-film nitrate sensor performance prediction based on image analysis and credibility data to enable a certify as built framework, in Conference Proceedings for ASME 2022 17th International Manufacturing Science and Engineering Conference (Vol. 2: Manufacturing Processes; Manufacturing Systems), West Lafayette, IN, July 2022. Link to abstract.

A.C. Hoganson, K. Uhlenhake, D.N. Collard, S.F. Son, and J.F. Rhoads, “Energy release rate characterization of additively manufactured Al/PVDF with varying infill densities and patterns,” in AIAA SciTech 2022 Forum, no. 0574, Jan. 2022. Link to video and abstract.

K.E. Uhlenhake, D.N. Collard, M. Gomez, M. Ornek, and S.F. Son, “Laser ignition of solid propellants using energetic nAl-PVDF optical sensitizers,” in AIAA SciTech 2022 Forum, no. 1744, Jan. 2022. Link to video and abstract.

F. Danzi, H. Tao, A. Joodaky, and J.M. Gibert, "Nonlinear dynamics of a two members angle-shaped energy harvester," in Conference Proceedings: ASME 2022 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Nov. 2022. Link to abstract.

C.E. Silva, A. Maghareh, J.M. Gibert, and S.J. Dyke, "Experimental demonstration of the use of a nonlinear energy sink with rigid lateral boundaries as an attenuator for impulsive vibrations," in Advances in Nonlinear Dynamics: Proceedings of the Second International Nonlinear Dynamics Conference (NODYCON 2021), Volume 2, W. Lacarbonara, B. Balachandran, M.J. Leamy, J. Ma, J.A. Tenreiro Machado, and G. Stepan, Eds., 2022. Link to abstract.

V. Radhakrishna, R.J. Tancin, and C.S. Goldenstein, “Ultrafast-laser-absorption imaging for 1D measurements of temperature and CN via the ultraviolet B²Σ⁺←X²Σ⁺ bands,” in AIAA SciTech 2022 Forum, no. 1524, Jan. 2022. Link to video and abstract.

M. Ruesch, J.J. Gilvey, K. Daniel, K.P. Lynch, J.L. Wagner, and C.S. Goldenstein, “Laser absorption spectroscopy measurements of temperature, pressure, and NO X²Π_1/2 at 500 kHz in shock-heated air,” in AIAA SciTech 2022 Forum, no. 1526, Jan. 2022. Link to video and abstract.

P.H.C. Martins and M. Gonzalez, “A process-based pore network model construction for granular packings under large plastic deformations,” Transport in Porous Media, vol. 145, pp. 45-72, July 2022. Link to abstract.

E. Kozikowski, N.W. Hartman, and J.D. Camba, "Development and evaluation of a computer vision system for assembly bolt pattern traceability and poka-yoke," Conference Proceedings for ASME 2022 17th International Manufacturing Science and Engineering Conference (Vol. 2: Manufacturing Processes; Manufacturing Systems), West Lafayette, IN, July 2022. Link to abstract.

J. Zhou, J.D. Camba, N.W. Hartman, and Z. Li, "An approach to extend the digital thread from requirements to model geometry," Conference Proceedings for ASME 2022 17th International Manufacturing Science and Engineering Conference (Vol. 2: Manufacturing Processes; Manufacturing Systems), West Lafayette, IN, July 2022. Link to abstract.

A.G. Martinez and S.D. Heister, “Wave structure of heterogeneous detonations in rotating detonation rocket engines,” in AIAA SciTech 2022 Forum, no. 0091, Jan. 2022. Link to video and abstract.

A. Harroun and S.D. Heister, “Liquid fuel survey for rotating detonation rocket engines,” in AIAA SciTech 2022 Forum, no. 0088, Jan. 2022. Link to video and abstract.

M. Koslowski, C.A. Duarte, and C. Yuan, "Surrogate hot-spot models for high-fidelity simulations of detonation in energetic materials," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, USA, July 2022. Link to abstract.

Z. Chang, M. Gu, A. Satija, R. Gejji, and R.P. Lucht, “Chirped probe pulse femtosecond CARS H₂ measurements at elevated pressure and temperature,” in AIAA SciTech 2022 Forum, no. 0289, Jan. 2022. Link to video and abstract.

A. Satija, W.C. Senior, T.R. Winter, R. Gejji, S. Meyer, M. Kulakhmetov, M.M. Masquelet, S. Stanley, and R.P. Lucht, “H₂ CARS thermometry in a high-pressure shear co-axial injector rocket chamber assembly,” in AIAA SciTech 2022 Forum, no. 0290, Jan. 2022. Link to video and abstract.

W.C. Senior, R. Gejji, R.P. Lucht, and C.D. Slabaugh, “Demonstration of CARS thermometry in a model solid fuel ramjet combustor,” in AIAA SciTech 2022 Forum, no. 2338, Jan. 2022. Link to video abstract.

C.M. Jarocki, T.D. Manship, and S.F. Son, “Investigation of mechanical properties of AP/Al/HTPB-based propellants using 2D digital image correlation at large and small scales,” in AIAA SciTech 2022 Forum, no. 1896, Jan. 2022. Link to video and abstract.

K. Patel, A. Saha, T.R. Meyer, S.P.M. Bane, and A. Satija, “Sub-nanosecond time-resolved optical emission thermometry of nanosecond pulsed plasma nonequilibrium,” AIAA SciTech 2022 Forum, no. 1749, Jan. 2022. Link to video and abstract.

M. Gomez, A.M. Braun, T.R. Meyer, M. Slipchenko, and S. Roy, “Time-resolved volumetric (4D) laser induced fluorescence imaging of primary spray breakup,” in AIAA SciTech 2022 Forum, no. 0559, Jan. 2022. Link to video and abstract.

A. Saha, J. Crosmer, H. Subramani, G.H. Gunaratne, S. Roy, and T.R. Meyer, “Nonlinear analysis of shear coaxial jets with transverse acoustic forcing,” in AIAA SciTech 2022 Forum, no. 1164, Jan. 2022. Link to video and abstract.

A.D. Brown, M. Gomez, T.R. Meyer, S.F. Son, and D.R. Guildenbecher, “Imaging pyrometry and optical depth measurements in explosive fireballs using high-speed imaging,” in AIAA SciTech 2022 Forum, no. 1311, Jan. 2022. Link to video and abstract.

Z. Ayers, V. Athmanathan, D.E. Paxson, and T.R. Meyer, “Design and operability of a variably premixed rotating detonation engine for the evaluation of mixing effects,” in AIAA SciTech 2022 Forum, no. 1261, Jan. 2022. Link to video and abstract.

D.K. Lauriola, A.D. Brown, P. Hsu, N. Jiang, S. Roy, T.R. Meyer, and S.F. Son, “100 kHz burst-mode picosecond vibrational N2 CARS thermometry in energetic combustion environments,” in AIAA SciTech 2022 Forum, no. 1943, Jan. 2022. Link to video and abstract.

D. Piercey, "Synthesis of new energetic materials based on triazines, tetrazoles, and azasydnones," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

R. Alviani, G.A. Blaisdell, and J. Poggie, “Computational analysis of planned high-speed swept wing-elevon experiments,” in AIAA SciTech 2022 Forum, no. 2198, Jan. 2022. Link to video and abstract.

J. Gaskins, J. Poggie, and G.A. Blaisdell, "Simulation of a high Reynolds number compressible turbulent boundary layer developing in the presence of a sinusoidal plane," in AIAA Aviation 2022 Forum, no. 3251, June 2022. Link to video and abstract.

L. Holifield, J. Poggie, and G.A. Blaisdell, "Parametric study of cavity flow, in AIAA Aviation 2022 Forum, no. 3923, June 2022. Link to video and abstract.

H. Ngoh and J. Poggie, "Influence of upstream flow perturbations on blunt fin induced shock-wave/boundary-layer interaction unsteadiness," in 75th Annual Meeting of the Division of Fluid Dynamics, no. T10.00004, Indianapolis, IN, Nov. 2022. Link to abstract.

M.E. Noftz, A.J. Shuck, J.S. Jewell, J. Poggie, A. Bustard, T.J. Juliano, and N.J. Bisek, “Design of an internal osculating waverider intake,” in AIAA SciTech 2022 Forum, no. 0064, Jan. 2022. Link to video and abstract.

M.E. Noftz, A.N. Bustard, A.J. Shuck, J.S. Jewell, T.J. Juliano, J. Poggie, and N.J. Bisek, "Diagnostics and testing of an internal osculating waverider intake," in AIAA Aviation 2022 Forum, no. 3259, June 2022. Link to video and abstract.

A.J. Shuck, J. Poggie, and G.A. Blaisdell, "Computational study of transition on a flared cone using random forcing," in AIAA Aviation 2022 Forum, no. 3248, June 2022. Link to video and abstract.

L.E. Villa, J. Gabi, A. Marconnet, and T.L. Pourpoint, “Heat transfer property approximation for phase change materials in high heat flux environments,” in AIAA SciTech 2022 Forum, no. 1859. Link to video and abstract. Link to formula correction.

W.W. Chapman, G.A. Montoya, T.R. Salyer, J.F. Rhoads, and S.F. Son, "Effects of embedded energetic sensors within an RDX-based explosive," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

Y. Xu, N.A. LiBretto, Q. Zhao, B.M. Savoie, J.T Miller, and J. Greeley, "Rationalizing olefin oligomerization on single site GA3+ catalysts on amorphous silica: A first principles study combined with experiments and automated reaction network explorations," in The 27th North American Catalysis Society Meeting, May 2022. Link to abstract.

Q. Zhao and B.M. Savoie, "Yet another reaction prediction v2.0: Advances in automatic reaction prediction and establishment of benchmark systems," in APS March Meeting 2022, March 2022. Link to abstract.

S.A. Miller, D. Mamrol, J.J. Redmond, K. Jantze, C. Scalo, and J.S. Jewell, “High-speed boundary layer instability on a flat pate at angle of attack with porous walls,” in AIAA SciTech 2022 Forum, no. 0303, Jan. 2022. Link to video and abstract.

S.A. Miller, D. Mamrol, J.J. Redmond, K. Jantze, C. Scalo, and J.S. Jewell, "Investigation of second-mode instability attenuation over porous materials in Mach-6 quiet flow," in AIAA Aviation 2022 Forum, no. 3530, June 2022. Link to video and abstract.

R. Morton, X. Zhao, H. Kedia, N. Lucarelli, D. Peralta-Salas, C. Scalo, and W.T.M. Irvine, "A geometric model for helicity evolution in vortex rings," in APS Marching Meeting 2022, March 2022. Link to abstract.

A.M. Braun, M.N. Slipchenko, T.R. Meyer, P.M. Danehy, and S. Roy, "Improved spectral purity of burst-mode laser for filtered rayleigh scattering applications," in Laser Applications to Chemical, Security and Environmental Analysis, July 2022, p. LM1B.4. Link to abstract.

E.L. Braun, V. Athmanathan, M.N. Slipchenko, and T.R. Meyer, "Measurement precision of fs/ps coherent anti-stokes Raman scattering of low-pressure applications," in Laser Applications to Chemical, Security and Environmental Analysis, July 2022, p. LM2B.6. Link to abstract.

C.Q. Crabtree, R.J. Albertson, M.E. Noftz, M.N. Slipchenko, J.S. Jewell, and T.R. Meyer, "Low-coherence diode laser array light source for high-speed imaging," in Imaging Systems and Applications, July 2022, p. JW2A.46. Link to abstract.

M. Gomez, M.N. Slipchenko, S.F. Son, and T.R. Meyer, "Burst-mode noncollinear optical parametric oscillator," in Laser Applications to Chemical, Security and Environmental Analysis, July 2022, p. LTu5B.3. Link to abstract.

A.M. Webb, V. Athmanathan, J. Fisher, C.Q. Crabtree, M. Slipchenko, and T.R. Meyer, “Megahertz-rate femtosecond laser activation and sensing of hydroxyl for velocimetry in a rotating detonation combustor exhaust,” in AIAA SciTech 2022 Forum, no. 2372, Jan. 2022. Link to video and abstract.

N. Jiang, P. Hsu, M. Slipchenko, S. Roy, D.K. Lauriola, A.M. Webb, T.R. Meyer, M. Gragston, R. Parker, P. Portoni, C. McDemortt, and T. Wadhams, “MHz rate flow diagnostics in CUBRC Mach 10 shock tunnel,” in AIAA SciTech 2022 Forum, no. 1655, Jan. 2022. Link to video and abstract.

V. Athmanathan, A.M. Webb, C.Q. Crabtree, R.B. Wang, J. Braun, G. Paniagua, C.A. Fugger, S. Roy, M. Slipchenko, T.R. Meyer, “Detonation wave dynamics of straight and expanding annular injectors using MHz rate OH* chemiluminescence, and URANS simulations,” in AIAA SciTech 2022 Forum, no. 1264, Jan. 2022. Link to video and abstract.

S.P. Kearney, K. Daniel, J.L. Wagner, K.P. Lynch, C.R. Downing, D.K. Lauriola, J. Leicht, and M. Slipchenko, “Burst-mode coherent anti-stokes Raman scattering N₂ thermometry in the Sandia free-piston shock tube,” in AIAA SciTech 2022 Forum, no. 0894, Jan. 2022. Link to video and abstract.

A.J. Saltzman, S.J. Beresh, S.P. Kearney, C.Q. Crabtree, and M. Slipchenko, “Toward snapshot cross-correlation doppler global velocimetry for high-speed flows,” in AIAA SciTech 2022 Forum, no. 0902, Jan. 2022. Link to video and abstract.

N. Jiang, P. Hsu, S.W. Grib, M. Slipchenko, S. Roy, D. Shekhtman, N. Parsiale, M.S. Smith, and A. Spicer, “Mach 18 flow velocimetry with 100-kHz KTV and PLEET in AEDC tunnel 9, in AIAA SciTech 2022 Forum, no. 0898, Jan. 2022. Link to video and abstract.

A. Patel, A. Ranjan, X. Wang, M. Slipchenko, M.N. Shneider, and A. Shashurin, “Thomson and collisional regimes of in-phase coherent microwave scattering off small plasma objects,” in AIAA SciTech 2022 Forum, no. 1748, Jan. 2022. Link to video and abstract.

J. Lawrence, C.J. Blum-Sorensen, S.G. Hamlin, and S.F. Son, "Detonation performance of CL-20 and MDNT co-crystal versus physical mixture," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

G.C. Mathews, M. Gomez, C. Schwartz, S.F. Son, C.S. Goldenstein, and D.R. Guildenbecher, “Laser-absorption-spectroscopy measurements of temperature, pressure, and CO at 1 MHz in post-detonation fireballs,” in AIAA SciTech 2022 Forum, no. 0288, Jan. 2022. Link to video and abstract.

G.A. Montoya, J. Dean, J. Lawrence, T.R. Salyer, and S.F. Son, "Evaluation of explosively-driven flash coatings," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

T.R. Salyer, T.D. Aslam, C. Meyer, W.W. Chapman, S.F. Son, J.F. Rhoads, H. Rajora, C. Scalo, and G. Montoya, "Additively manufactured energetic sensors (AMES)," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

D.G. Scott, N.R. Cummock, S.F. Son, "Small-scale characterization of shock sensitivity for non-ideal explosives based on imaging of detonation failure behavior," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

J.H. Shin, D.K. Messer, M. Ornek, S.F. Son, and M. Zhou, "Multiple time scale simulations of hotspot development due to dielectric breakdown driven by piezo- and flexo-electricity in energetic materials," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

P. Lafourcade, B.W. Hamilton, M. Sakano, P. Yoo, A. Strachan, and J.-B. Maillet, "Multiscale reactive model for 1,3,5-triamino-2,4,6-trinitrobenzene inferred by reactive MD simulations and unsupervised learning," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

B.H. Lee, B.W. Hamilton, J.P. Larentzos, J.K. Brennan, and A. Strachan, "Shock to deflagration transition of RDX: Role of microstructure investigated through mesoscale reactive model," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

B.H. Lee, M.N. Sakano, J.P. Larentzos, J.K. Brennan, and A. Strachan, "Coarse-grained reactive model of RDX: Conjoining the continuum and atomistic resolution," in Bulletin of the American Physical Society, March 2022. Link to abstract.

C. Li and A. Strachan, "Effect of pore morphology and multiple hotspot formation mechanisms in high energetic materials," in 22nd Biennial Conference of the APS Topical Group on Shock Compression of Condensed Matter, vol. 67, no. 8, Anaheim, CA, Jul. 2022. Link to abstract.

H. Wu, A. Huang, and J.W. Sutherland, “Condition-based monitoring and novel fault detection based on incremental learning applied to rotary systems,” in Procedia CIRP, vol. 105, pp. 788-793, April 2022. Link to abstract.

C. Blanchard and S. Zhang, "Removal of phase artifacts from high-contrast texture for 3D fringe projection system," in Dimensional Optical Metrology and Inspection for Practical Applications XI Proceedings Volume 12098, K.G. Harding, S. Zhang, J.-S. Hyun, and B. Li, Eds., SPIE Defense + Commercial Sensing, Orlando, FL, United States, May 2022. Link to abstract.

Y.-H. Liao and S. Zhang, "Absolute three-dimensional shape measurement combining digital image correlation and phase-shifting methods," in Dimensional Optical Metrology and Inspection for Practical Applications XI Proceedings Volume 12098, K.G. Harding, S. Zhang, J.-S. Hyun, and B. Li, Eds., SPIE Defense + Commercial Sensing, Orlando, FL, United States, May 2022. Link to abstract. 

S. Zhang, "Flexible and accurate phase-to-coordinate calibration method," Dimensional Optical Metrology and Inspection for Practical Applications XI Proceedings Volume 12098, K.G. Harding, S. Zhang, J.-S. Hyun, and B. Li, Eds., SPIE Defense + Commercial Sensing, Orlando, FL, United States, May 2022. Link to abstract.

Patents:

X. Xu, B.W. Boudouris, and L. Pan, "Continuous and scalable 3D nanoprinting," US11305482B2, 2022. Link to patent.

S.C. Jones, V.K. Davis, C.M. Bates, N.M. Momcilovic, B.M. Savoie, M.A. Webb, T.F. Miller, R.H. Grubbs, and J.M. Murphy, "Organic synthesis applications of non-aqueous fluoride salt solutions," US11398645B2, 2022. Link to patent.

F. Semperlotti, H. Hao, C. Scalo, and M. Sen, "Thermoacoustic device and method of making the same," US11375320B2, 2022. Link to patent.

2021 PERC Faculty & Staff Publications

Journal Articles/Book Chapters:

L.-K. Lin, J.-T. Tsai, S. Diaz-Amaya, M. Ramazan Oduncu, Y. Zhang, P.-Y. Huang, C. Ostos, J.P. Schmelzel, R. Mohammadrahimi, P. Xu, A.M. Ulloa Gomez, S.N. Shuvo, N. Raghunathan, X. Zhang, A. Wei, D. Bahr, D. Peroulis, and L.A. Stanciu, “Antidelaminating, thermally stable, and cost-effective flexible Kapton platforms and nitrate sensors, mercury aptasensors, protein sensors, and p-type organic thin-film transistors,” ACS Applied Materials & Interfaces, vol. 13, no. 9, pp. 11369-11384, Feb. 2021. Link to article.

L. K. Rajendran, S. Bhattacharya, S.P.M. Bane, and P. P. Vlachos, “Meta-uncertainty for particle image velocimetry,” Measurement Science and Technology, vol. 32, no. 10, p. 104002, Jun. 2021. Link to article.

B. Singh, R. L. K, P. Vlachos, and S.P.M. Bane, “Shock generated vorticity in spark discharges,” Journal of Physics D: Applied Physics, vol. 54, no. 31, p. 315202, May 2021. Link to article.

X. Wang, A. Patel, S.P.M. Bane, and A. Shashurin, “Experimental study of atmospheric pressure single-pulse nanosecond discharge in pin-to-pin configuration,” arXiv:2106.09061, v2, Jun. 2021. Link to article.

I. V. Novosselov, C.A. Coultas-Mckenney, L. Miroshnik, K. Kottapalli, B. Ockerman. T.E. Manley, M.W. Gardner, R. Lareau, J. Brady, M. Sweat, A. R. Smith, M.J. Hargather, and S.P. Beaudoin, “Trace explosives sampling for security applications (TESSA) study: Evaluation of procedures and methodology for contact sampling efficiency,” Talanta, vol. 234, no. 1, p. 122633, Nov. 2021. Link to article.

A.S. Parker, L.S. Taylor, and S.P. Beaudoin, "Polymer effects on crystallization at the amorphous atazanavir-water interface," Journal of Crystal Growth, vol. 571, no. 1, p. 126254, Oct. 2021. Link to abstract.

C. A. Stevenson, J. E. Monroe, C. G. Norris, A. R. Roginski, and S.P. Beaudoin, “The effects of surface and particle properties on van der Waals (vdW) adhesion quantified by the enhanced centrifuge method,” Powder Technology, vol. 392, pp. 514–523, Nov. 2021. Link to article.

C.A. Stevenson, M.C. Thomas, and S.P. Beaudoin, "An enhanced centrifuge-based approach to powder characterization: The interaction between particle roughness and particle-scale surface topography described by a size-dependent 'effective' Hamaker constant," Powder Technology, vol. 391, pp. 198-205, Oct. 2021. Link to abstract. 

M.C Stevenson, S.P. Beaudoin, and D.S. Corti, "Toward an improved method for determining the Hamaker Constant of solid materials using atomic force microscopy. II. Dynamic analysis and preliminary validation," Journal of Physical Chemistry C, vol. 125, no. 36, pp. 20003-20013, Sept. 2021. Link to abstract. 

K. Liu, K. Perera, Z. Wang, J. Mei, and B.W. Boudouris, “Impact of open-shell loading on mass transport and doping in conjugated radical polymers,” Journal of Polymer Science, Aug. 2021, vol. 59, no. 22, pp. 2771-2782. Link to abstract.

M.P. McConnell, A.K. Murray, B.W. Boudouris, I.E. Gunduz, S.F. Son, G.T.-C. Chiu, and J.F. Rhoads, “Conductive polymer spark gap igniters,” Propellants, Explosives, Pyrotechnics, Aug. 2021, vol. 46, no. 10, pp. 1500-1503. Link to abstract.

P. Somers, Z. Liang, J.E. Johnson, B.W. Boudouris, L. Pan, and X. Xu, “Rapid, continuous projection multi-photon 3D printing enabled by spatiotemporal focusing of femtosecond pulses,” Light: Science & Applications, Sept. 2021, vol. 10, no. 199. Link to article.

Y. Tan, N. C. Casetti, B.W. Boudouris, and B.M. Savoie, “Molecular design features for charge transport in nonconjugated radical polymers,” Journal of American Chemical Society, vol. 143, no. 31, pp. 11994–12002, Jul. 2021. Link to article.

J. Gao, N. Kedir, J. Hernandez, J. Wang, S. Paulson, X. Zhai, T. Horn, G. Kim, K. Fezzaa, F. De Carlo, P. Shevchenko, T. Tallman, R. Sterkenburg, and W. Chen, “High-speed synchrotron X-ray phase-contrast imaging for evaluating microscale damage mechanisms and tracking cracking behaviors inside cross-ply GFRCs,” Composites Science and Technology, vol. 210, p. 108814, Jul. 2021. Link to article.

J. Gao, Z. Guo, J. Hernandez, F. Zhou, Y. Nie, J. Gao, B. Lim, N. Kedir, X. Zhai, J. Wang, J. Tsai, F. De Carlo, P. Shevchenko, T. Tallman, M. Jun Byung-Guk, G. Palmese, and W. Chen, “Transverse impact by RCCs on S-glass and Kevlar® FRC strips,” Composites Part A: Applied Science and Manufacturing, vol. 146, p. 106425, Jul. 2021. Link to article.

Z. Guo and W. Chen, “First-order approximations of dynamic material strengths for the ballistic perforation of aluminum target plates,” Journal of Dynamic Behavior of Materials, vol. 7, pp. 566-574, May 2021. Link to article.

Z. Guo and W. Chen, “Dimensionless parameters for the perforation of ductile plates by armor-piercing rounds,” International Journal of Impact Engineering, vol. 156, p. 103952, Oct. 2021. Link to article.

N. Kedir, J.A. Hernandez, B.H. Lim, J. Gao, X. Zhai, Y. Nie, M.N. Issahaq, T.N. Tallman, and W. Chen, “Effect of laser irradiation time on the surface characteristics of a carbon fiber composite,” Journal of Laser Applications, vol. 33, p. 042034, Oct. 2021. Link to abstract.

X. Gao, B. Jiang, A.E. Lascsahuanga Allcca, K. Shen, M.A. Sadi, A.B. Solanki, P. Ju, Z. Xu, P. Upadhyaya, Y.P. Chen, S.A. Bhave, and T. Li, “High-contrast plasmonic-enhanced shallow spin defects in hexagonal boron nitride for quantum sensing,” Nano Letters, vol. 21, no. 18, pp. 7708-7714, Sept. 2021. Link to abstract.

H. Idzuchi, S. Iihama, M. Shimura, A. Kumatani, S. Mizukami, and Y.P Chen, “Spin injection characteristics of Py/graphene/Pt by gigahertz and terahertz magnetization dynamics driven by femtosecond laser pulse,” AIP Advances, vol. 11, p. 015321, Jan. 2021. Link to article.

S.S. Kale, Y.P. Chen, and S. Kais, “Constructive quantum interference in a photo-chemical reaction of ⁸⁷Rb Bose Einstein condensate,” arXiv:2107.05441, Jul. 2021. Link to abstract.

D.N. Collard, T.J. Fleck, J.F. Rhoads, and S.F. Son, “Tailoring the reactivity of printable Al/PVDF filament,” Combustion and Flame, vol. 223, pp. 110–117, Jan. 2021. Link to article.

D.N. Collard, M.S. McClain, N. A. Rahman, N. H. Dorcy, T.R. Meyer, and S.F. Son, “Dynamic X-ray imaging of additively manufactured reactive components in solid propellants,” Journal of Propulsion and Power, vol. 37, no. 3, pp. 362–368, Nov. 2021. Link to article.

Y. Piao, V.N. Tondare, C.S. Davis, J.M. Gorham, E.J. Petersen, J.W. Gilman, K. Scott, A.E. Vladár, and A.R. Hight Walker, “Comparative study of multiwall carbon nanotube nanocomposites by Raman, SEM, and XPS measurement techniques,” Composites Science and Technology, vol. 208, p. 108753, May 2021. Link to article.

M.L. Rencheck, B.T. Mackey, Y.-Y. Hu, C.-C. Chang, M.D. Sangid, and C.S. Davis, “Identifying internal stresses during mechanophore activation,” Advanced Engineering Materials, Oct. 2021. Link to abstract.

A. McDonald, C.S. Goldenstein, and R. J. Tancin, “Spectrally resolved, 1D, mid-infrared imaging of temperature, CO2, and HCl in propellant flames,” Applied Optics, vol. 60, no. 16, pp. 4524–4534, Jun. 2021. Link to article.

R. J. Tancin and C.S. Goldenstein, “Ultrafast-laser-absorption spectroscopy in the mid-infrared for single-shot, calibration-free temperature and species measurements in low- and high-pressure combustion gases,” arXiv:2107.02642v1, Jul. 2021. Link to article.

V. Radhakrishna, R.J. Tancin, G. Mathews, and C.S. Goldenstein, “Single-shot, mid-infrared ultrafast-laser-absorption-spectroscopy measurements of temperature, CO, NO and H₂O combustion gases,” Applied Physics B, vol. 127, Nov. 2021. Link to abstract.

S. Gopalakrishnan, N.W. Hartman, and M. D. Sangid, “Integrating materials model-based definitions into design, manufacturing, and sustainment: A digital twin demonstration of incorporating residual stresses in the lifecycle analysis of a turbine disk,” Journal of Computing and Information Science in Engineering, vol. 21, no. 2, p. 021006, Apr. 2021. Link to article.

H. F. Celebi, D. Lim, K. J. Dille, and S.D. Heister, “Response of angled and tapered liquid injectors to passing detonation fronts at high operating pressures,” Shock Waves, vol. 116, pp. 1–10, Apr. 2021. Link to article.

A. J. Harroun, S.D. Heister, and J. H. Ruf, “Computational and experimental study of nozzle performance for rotating detonation rocket engines,” Journal of Propulsion and Power, pp. 1–14, May 2021. Link to article.

D. Lim, S.D. Heister, J. Humble, and A. J. Harroun, “Experimental investigation of wall heat flux in a rotating detonation rocket engine,” Journal of Spacecraft and Rockets, pp. 1–9, Feb. 2021. Link to article.

I. V. Walters, R. M. Gejji, S.D. Heister, and C.D. Slabaugh, “Flow and performance analysis of a natural gas-air rotating detonation engine with high-speed velocimetry,” Combustion and Flame, vol. 232, p. 111549, Oct. 2021. Link to article.

E. Feng, X. Ma, and H.I. Kenttämaa, “Characterization of protonated substituted ureas by using diagnostic gas-phase ion-molecule reactions followed by collision-activated dissociation in tandem mass spectrometry experiments,” Analytical Chemistry, vol. 93, no. 22, pp. 7851–7859, Jun. 2021. Link to article.

J. R. Milton, B.J. Jankiewicz, J.P. Max, N.R. Vinueza, L.M. Kirkpatrick, K. Campbell, V.A. Gallardo, J.N. Reece, and H.I. Kenttämaa, “Study on the gas-phase reactivity of charged pyridynes,” Journal of Organic Chemistry, 2021. Link to article.

T. Mondal, S. Shaik, H.I. Kenttämaa, and T. Stuyver, “Modulating the radical reactivity of phenyl radicals with the help of distonic charges: it is all about electrostatic catalysis,” Chemical Science, vol. 12, no. 13, pp. 4800–4809, Apr. 2021. Link to article.

A. Dandekar and M. Koslowski, “Effect of particle proximity and surface properties on the response of PBX under vibration,” Computational Materials Science, vol. 192, p. 110334, May 2021. Link to article.

P. C. Vilalta, S. Sheikholeslami, K. Saleme Ruiz, X. C. Yee, and M. Koslowski, “Machine learning for predicting the critical yield stress of high entropy alloys,” Journal of Engineering Materials and Technology, vol. 143, no. 2, p. 021005, Apr. 2021. Link to article.

N.S. Rodrigues, C.T. McDonald, O.O. Busari, A. Satija, and R.P. Lucht, “Transverse injection of rich, premixed, natural gas-air and natural gas-hydrogen-air reacting jets into high-speed vitiated crossflow at engine-relevant conditions,” International Journal of Hydrogen Energy, vol. 46, no. 72, pp. 35718-35738, Oct. 2021. Link to abstract.

D. Shin, V.R. Hasti, A.J. Bokhart, N.S. Rodrigues, P.E. Sojka, R.P. Lucht, J.P. Gore, N. Rizk, and P.A. Corber, “Spray characteristics of conventional and alternative fuels,” in Fuel Effects on Operability of Aircraft Gas Turbine Combustors, M. Colket and J. Heyne, Eds., American Institute of Aeronautics & Astronautics, Sept. 2021, pp. 295-364.

D. Shin, N. S. Rodrigues, A. J. Bokhart, P. E. Sojka, J. P. Gore, and R.P. Lucht, “Spray characteristics of standard and alternative aviation fuels at cold-start conditions,” AIAA Journal, pp. 1–13, Jul. 2021. Link to article.

J.T. Dean, M. Örnek, T.D. Manship, and S.F. Son, “The kinetics of thermal decomposition and hot-stage microscopy of selected energetic cocrystals,” Journal of Engineering Materials and Technology, vol. 39, no. 3, pp. 313–332, 2021. Link to article.

T.J. Fleck, T.D. Manship, S.F. Son, and J.F. Rhoads, “Structural energetic properties of Al/PVDF composite materials prepared using fused filament fabrication,” Propellants, Explosives, and Pyrotechnics, vol. 46, no. 4, pp. 670–678, Apr. 2021. Link to article.

M.S. McClain, A. Afriat, B.J. Montano, J.F. Rhoads, I.E. Gunduz, and S.F. Son, “Dynamic combustion of functionally graded additively manufactured composite solid propellant,” Journal of Propulsion and Power, pp. 1–8, May 2021. Link to article.

J.M. Fisher, T.R. Meyer, and M.N. Slipchenko, “Grid-based femtosecond laser electronic excitation tagging for single-ended 2D velocimetry at kilohertz rates,” Applied Optics, vol. 60, no. 32, pp. 10714-10720, 2021. Link to abstract.

B.R. Halls, N. Rahman, K.E. Matusik, T.R. Meyer, and A.L. Kastengren, “Feasibility of X-ray scattering for tracer-free liquid-phase thermometry for multiphase flows,” Fuel, vol. 290, p. 120040, Apr. 2021. Link to article.

D. Inman, D.G. Cuadrado, V. Andreoli, J. Fisher, G. Paniagua, P.A.N. Aye-Addo, L. Bhatnagar, F. Lozano, T.R. Meyer, and M. Bloxham, “Particle image velocimetry in a high-pressure turbine stage at aerodynamically engine representative conditions,” Journal of Engineering for Gas Turbines and Power, vol. 143, no. 6, Jun. 2021. Link to article.

A.L. Kastengren, B.R. Halls, K.E. Matusik, N. Rahman, and T.R. Meyer, “Evaluation of liquid-phase thermometry in impinging jet sprays using synchrotron x-ray scattering,” Applied Optics, vol. 60, no. 11, pp. 2967–2973, Apr. 2021. Link to article.

J.D. Miller, J.W. Tröger, S.R. Engel, T. Seeger, A. Leipertz, and T.R. Meyer, “CH and NO planar laser-induced fluorescence and Rayleigh-scattering in turbulent flames using a multimode optical parametric oscillator,” Applied Optics, vol. 60, no. 1, pp. 98–108, Jan. 2021. Link to article.

J. Saavedra, G. Paniagua, F. Lozano, J. Fisher, A. Webb, and T.R. Meyer, “Flow conditioning system for tri-sonic high pressure aerothermal testing,” Flow Measurement and Instrumentation, vol. 79, p. 101910, Jun. 2021. Link to article.

J. Saavedra, V. Athmanathan, G. Paniagua, T.R. Meyer, D. Straub, J. Black, and S. Ramesh, “Scalable heat transfer characterization on film cooled geometries based on discrete green’s functions,” Journal of Turbomachinery, vol. 143, no. 2, Feb. 2021. Link to article.

Z.-S. Chen, Q.-X. Zhu, Y. Xu, Y.-L. He, Q.-L. Su, Y. C. Liu, and Z.K. Nagy, “Integrating virtual sample generation with input-training neural network for solving small sample size problems: Application to purified terephthalic acid solvent system,” Soft Computing, vol. 25, pp. 6489-6504, Feb. 2021. Link to abstract.

M. L. Gettings, E.F.C. Byrd, M. Zeller, and D.G. Piercey, “Methyl sydnone imine and its energetic salts,” New Journal of Chemistry, vol. 45, no. 4, pp. 2228–2236, Feb. 2021. Link to article.

M. L. Gettings, S.E.D. Finch, A. Sethia, E.F.C. Byrd, M. Zeller, and D.G. Piercey, “Heterocyclic nitrilimines and their use in the synthesis of complex high-nitrogen materials,” Inorganic Chemistry, vol. 60, no. 11, pp. 7607–7611, Jun. 2021. Link to article.

S.E. Creegan, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “Synthesis and characterization of the energetic 3-azido-5-amino-6-nitro-1,2,4-triazine,” Propellants, Explosives, and Pyrotechics, vol. 46, no. 2, pp. 214–221, Feb. 2021. Link to article.

S.E. Creegan, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “Energetic 1,2,4-triazines: 3,5-diamino-6-nitro-1,2,4-triazine and its oxide,” Crystal Growth & Design, vol. 21, no. 7, pp. 3922–3927, Jul. 2021. Link to article.

D.R. Wozniak, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “3-Methyl-1,2,3-triazolium-1 N -dinitromethylylide and the strategy of zwitterionic dinitromethyl groups in energetic materials design,” RSC Advances, vol. 11, no. 29, pp. 17710–17714, May 2021. Link to article.

S.R. Yocca, J. Yount, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “1,3,4,5-tetraamino-1,2,4-triazolium cation: An energetic moiety,” Inorganic Chemistry, vol. 60, no. 13, pp. 9645–9652, Jul. 2021. Link to article.

J. Yount and D.G. Piercey, "Electrochemical synthesis of high-nitrogen materials and energetic materials," Chemical Reviews, vol. 122, no. 9, pp. 8809-8840, March 2022. Link to article.

J. Yount, M. Zeller, E.F.C. Byrd, and D.G. Piercey, “4,4’-Dinitrimino-5,5’-diamino-3,3’-azo-bis-1,2,4-triazole: A high-performing zwitterionic energetic material,” Inorganic Chemistry, vol. 60, no. 21, pp. 16204-16212, Sept. 2021. Link to abstract.

A.S. Deshpande and J. Poggie, “Large-scale unsteadiness in a compression ramp flow confined by sidewalls,” Physical Review Fluids, vol. 6, no. 2, p. 024610, Feb. 2021. Link to article.

H. Ngoh and J. Poggie, “Detached eddy simulation of blunt-fin-induced shockwave/boundary-layer interaction,” AIAA Journal, Dec. 2021. Link to abstract.

P.M. Piper, J.R. Gabl, T.L. Pourpoint, T. E. Dawson, and R. S. Mehta, “Carbonaceous deposits in a fuel-film-cooled rocket combustor: Heat flux measurements,” Journal of Propulsion and Power, vol. 37, no. 5, Sept. 2021. Link to article.

P.M. Piper and T.L. Pourpoint, “Carbonaceous deposits in a fuel-film-cooled rocket combustor: Optical profilometry,” Journal of Propulsion and Power, vol. 37, no. 5, Sept. 2021. Link to article.

K.A. Clements, M.J. Baier, P.V. Ramachandran, and S.F. Son, “Experimental study of factors affecting hypergolic ignition of ammonia borane,” Journal of Propulsion and Power, vol. 37, no. 2, pp. 202–210, Mar. 2021. Link to article.

P.V. Ramachandran and H.J. Hamann, “Ammonia-borane as a catalyst for the direct amidation of carboxylic acids,” Organic Letters, vol. 23, no. 8, pp. 2938–2942, Apr. 2021. Link to article.

P.V. Ramachandran, S. Choudhary, and A. Singh, “Trimethyl borate-catalyzed, solvent-free reductive amination,” Journal of Organic Chemistry, vol. 86, no. 5, pp. 4274–4280, Mar. 2021. Link to article.

T. Chi, S. Akkiraju, Z. Liang, Y. Tan, H. JoongKim, X. Zhao, B.M. Savoie, and B.W. Boudouris, “Design of an n-type low glass transition temperature radical polymer,” Polymer Chemistry, vol. 12, no. 10, pp. 1448–1457, Mar. 2021. Link to article.

A. Khot and B.M. Savoie, “Top–down coarse-grained framework for characterizing mixed conducting polymers,” Macromolecules, vol. 54, no. 10, pp. 4889–4901, May 2021. Link to article.

Q. Zhao, N.C. Iovanac, and B.M. Savoie, “Transferable ring corrections for predicting enthalpy of formation of cyclic compounds,” Journal of Chemical Information and Modeling, vol. 61, no. 6, pp. 2798–2805, Jun. 2021. Link to article.

Q. Zhao and B.M. Savoie, “Simultaneously improving reaction coverage and computational cost in automated reaction prediction tasks,” Nature Computational Science, vol. 1, no. 7, pp. 479–490, Jul. 2021. Link to article.

Q. Zhao, Y. Xu, J. Greeley, and B.M. Savoie, “Deep reaction network exploration at a heterogeneous catalytic interface,” ChemRxiv, Nov. 2021. Link to abstract.

S.A. Hunt, M.T. Migliorino, C. Scalo, and S.D. Heister, “Onset criteria for bulk-mode thermoacoustic instabilities in supercritical hydrocarbon fuels,” Journal of Fluids Engineering, vol. 143, no. 4, p. 040903, Apr. 2021. Link to article.

A.G Martinez, M.T. Migliorino, C. Scalo, and S.D. Heister, “Experimental and numerical investigation of standing-wave thermoacoustic instability under transcritical temperature conditions,” The Journal of the Acoustical Society of America, vol. 150, no. 2900, Oct. 2021. Link to abstract.

V.C.B. Sousa and C. Scalo, “A unified quasi-spectral viscosity (QSV) approach to shock capturing and large-eddy simulation,” arXiv:2111.01929, Nov. 2021. Link to abstract.

R. Subramanian, R.R. Moar, and S. Singh, “White-box machine learning approaches to identify governing equations for overall dynamics of manufacturing systems: A case study on distillation column,” Machine Learning with Applications, vol. 3, p. 100014, Mar. 2021. Link to article.

R.M. Gejji, T. Buschhagen, and C.D. Slabaugh, “Occurrence of rotating detonation waves in a jet-stabilized combustor with premixed injection,” Journal of Propulsion and Power, vol. 37, no. 4, pp. 645–649, Mar. 2021. Link to article.

G.C. Mathews, M.G. Blaisdell, A.I. Lemcherfi, C.D. Slabaugh, and C.S. Goldenstein, “High-bandwidth absorption-spectroscopy measurements of temperature, pressure, CO, and H₂0 in the annulus of a rotating detonation rocket engine,” Applied Physics B, vol. 127, no. 165, Nov. 2021. Link to abstract.

V. Athmanathan, K.A. Rahman, D.K. Lauriola, J. Braun, G. Paniagua, M.N. Slipchenko, S. Roy, and T.R. Meyer, “Femtosecond/picosecond rotational coherent anti-Stokes Raman scattering thermometry in the exhaust of a rotating detonation combustor,” Combustion and Flame, vol. 231, p. 111504, Sep. 2021. Link to article.

J.M. Fisher, B.C. Chynoweth, M.E. Smyser, A.M. Webb, M.N. Slipchenko, J.S. Jewell, T.R. Meyer, and S.J. Beresh, “Femtosecond laser electronic excitation tagging velocimetry in a Mach six quiet tunnel,” AIAA Journal, vol. 59, no. 2, pp. 768–772, Feb. 2021. Link to article.

D.K. Lauriola, P.S. Hsu, N. Jiang, M.N. Slipchenko, T.R. Meyer, and S. Roy, “Burst-mode 100 kHz N2 ps-CARS flame thermometry with concurrent nonresonant background referencing,” Optics Letters, vol. 46, no. 21, pp. 5489-5492, 2021. Link to abstract.

D.K. Lauriola, K.A. Rahman, H.U. Stauffer, M.N. Slipchenko, T.R. Meyer, and S. Roy, “Concentration and pressure scaling of CH₂O electronic-resonance-enhanced coherent anti-Stokes Raman scattering signals,” Applied Optics, vol. 60, no. 4, pp. 1051–1058, Feb. 2021. Link to article.

J. G. Mance, M.N. Slipchenko, N. Jiang, S. Roy, and Z. Zhang, “Picosecond laser electronic excitation tagging velocimetry using a picosecond burst-mode laser,” Applied Optics, vol. 60, no. 15, pp. C60–C67, May 2021. Link to article.

A.R. Patel, A. Ranjan, X. Wang, M.N. Slipchenko, M.N. Shneider, and A. Shashurin, “Thomson and collisional regimes of coherent microwave scattering by non-relativistic small plasma objects,” arXiv:2106.02457, Jun. 2021. Link to article.

N.R. Cummock, J.R. Lawrence, M. Örnek, and S.F. Son, “The influence of microstructure and conformational polymorph on the drop-weight impact sensitivity of δ-phase HMX,” Journal of Energetic Materials, 2021. Link to article.

T.J. Fleck, J.C.S. McCaw, S.F. Son, I.E. Gunduz, and J.F. Rhoads, “Characterizing the vibration-assisted printing of high viscosity clay material,” Additive Manufacturing, vol. 47, no. 102256, Nov. 2021. Link to abstract.

S.K. Singh, V. Vuppuluri, B. Sun, B. Chang, A. Eckhardt, S.F. Son, A. Chang, and R. Kaiser, “Identification of elusive keto and enol intermediates in the photolysis of 1,3,5-trinitro-1,3,5-triazinane,” Journal of Physical Chemistry Letters, vol. 12, pp. 6062–6069, 2021. Link to article.

K.E. Uhlenhake, D. Olsen, M. Gomez, M. Örnek, M. Zhou, and S.F. Son, “Photoflash and laser ignition of full density nano-aluminum PVDF films,” Combustion and Flame, vol. 233, p. 111570, Nov. 2021. Link to article.

E.R. Westphal, A.D. Brown, E.C. Quintana, A.L. Kastengren, S.F. Son, T.R. Meyer, and K.N.G. Hoffmeister, “Visible emission spectra of thermographic phosphors under x-ray excitation,” Measurement Science and Technology, vol. 32, no. 9, p. 094008, Jun. 2021. Link to article.

E.R. Westphal, A.D. Brown, E.C. Quintana, A.L. Kastengren, S.F. Son, T.R. Meyer, and K.N.G. Hoffmeister, “Temperature-dependent x-ray fluorescent response from thermographic phosphors under x-ray excitation,” Applied Physics Letters, vol. 119, no. 3, p. 034103, Jul. 2021. Link to article.

S. Desai and A. Strachan, “Parsimonious neural networks learn interpretable physical laws,” Scientific Reports, vol. 11, no. 1, pp. 1–9, Jun. 2021. Link to article.

C.A. Duarte, C. Li, B.W. Hamilton, A. Strachan, and M. Koslowski, “Continuum and molecular dynamics simulations of pore collapse in shocked β-tetramethylene tetranitramine (β-HMX) single crystals,” Journal of Applied Physics, vol. 129, no. 1, p. 015904, Jan. 2021. Link to article.

D.E. Farache, J.C. Verduzco, Z.D. McClure, S. Desai, and A. Strachan, “Active learning and molecular dynamics simulations to find high melting temperature alloys,” arXiv:2110.08136, Oct. 2021. Link to abstract.

J. Ford, S. Seritan, X. Zhu, M.N. Sakano, M. Islam, A. Strachan, and T. MartÍnez, “Nitromethane decomposition via automated reaction discovery and an Ab initio corrected kinetic model,” Journal of Physical Chemistry A, vol. 125, no. 7, pp. 1447–1460, Feb. 2021. Link to article.

B.W. Hamilton, B.A. Steele, M.N. Sakano, M.P. Kroonblawd, I.-F. W. Kuo, and A. Strachan, “Predicted reaction mechanisms, product speciation, kinetics, and detonation properties of the insensitive explosive 2,6-Diamino-3,5-dinitropyrazine-1-oxide (LLM-105),” Journal of Physical Chemistry A, vol. 125, no. 8, pp. 1766–1777, Mar. 2021. Link to article.

B.W. Hamilton, M. P. Kroonblawd, C. Li, and A. Strachan, “A hotspot’s better half: Non-equilibrium intra-molecular strain in shock physics,” Journal of Physical Chemistry Letters, vol. 12, no. 11, pp. 2756–2762, Mar. 2021. Link to article.

B.W. Hamilton, M.P. Kroonblawd, and A. Strachan, “The potential energy hotspot: Effects from impact velocity, defect geometry, and crystallographic orientation,” arXiv:2109.12138, Sept. 2021. Link to abstract.

B.W. Hamilton, M.N. Sakano, C. Li, and A. Strachan, “Chemistry under shock conditions,” Annual Review of Materials Research, vol. 51, no. 1, pp. 101–130, Jul. 2021. Link to article.

M. Kroonblawd, B. Hamilton, and A. Strachan, “Fourier-like thermal relaxation of nanoscale explosive hot spots,” ChemRxiv, Jun. 2021. Link to article.

C. Li, M.N. Sakano, and A. Strachan, “Shock-induced hotspot formation in amorphous and crystalline 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX): A molecular dynamics comparative study,” Journal of Applied Physics, vol. 130, no. 5, p. 055902, Aug. 2021. Link to article.

P. Yoo, M.N. Sakano, S. Desai, M. Islam, P. Liao, and A. Strachan, “Neural network reactive force field for C, H, N, and O systems,” npj Computational Materials, vol. 7, Jan. 2021. Link to article.

W.J. Lee, K. Xia, N.L. Denton, B. Ribeiro, and J.W. Sutherland, “Development of a speed invariant deep learning model with application to condition monitoring of rotating machinery,” Journal of Intelligent Manufacturing, vol. 32, no. 2, pp. 393–406, May 2021. Link to article.

L. Li, H. Huang, F. Zhao, X. Zou, Y. Ren, Z. Liu, and J.W. Sutherland, “Understanding energy consumption of hydraulic press during drawing process,” International Journal of Advanced Manufacturing Technology, vol. 115, pp. 1497-1515, May 2021. Link to abstract.

D. Peddireddy, X. Fu, A. Shankar, H. Wang, B. Joung, V. Aggarwal, J.W. Sutherland, and M. Jun, “Identifying manufacturability and machining processes using deep 3D convolutional networks,” Journal of Manufacturing Processes, vol. 64, pp. 1336–1348, Apr. 2021. Link to article.

M.J. Triebe, F. Zhao, and J.W. Sutherland, “Genetic optimization for the design of a machine tool slide table for reduced energy consumption,” Journal of Manufacturing Science and Engineering, vol. 143, no. 10, Oct. 2021. Link to abstract.

M.J. Triebe, F. Zhao, and J.W. Sutherland, “Development of a cost model for vertical milling machines to assess impact of lightweighting,” Journal of Manufacturing Material Processes, vol. 5, no. 4, Dec. 2021. Link to abstract.

A.G. Marrugo, L.A. Romero, R. Vargas, and S. Zhang, “Method for large-scale structured-light system calibration,” Optics Express, vol. 29, no. 11, pp. 17316–17329, May 2021. Link to article.

S. Zhang, “Flexible and high-accuracy method for uni-directional structured light system calibration,” Optics and Lasers in Engineering, vol. 143, p. 106637, Aug. 2021. Link to article.

J. Zhang, B. Luo, X. Su, L. Li, B. Li, S. Zhang, and Y. Wang, “A convenient 3D reconstruction model based on parallel-axis structured light system,” Optics and Lasers in Engineering, vol. 138, p. 106366, Mar. 2021. Link to article.

Conference Presentations/Proceedings:

S.P.M. Bane, “High-speed aerodynamic flow control using nanosecond repetitively pulsed (NRP) plasmas,” in 74^th Annual Gaseous Electronics Conference, Virtual (vol. 66, no. 7), Oct. 2021. Link to abstract.

B.-S. Chen, A.L. Garner, and S.P.M. Bane, “Simulation of nanosecond repetitively pulsed plasma assisted counter-flow diffusion flame,” in 2021 IEEE International Conference on Plasma Science (ICOPS), Lake Tahoe, NV, USA, Sept. 2021. Link to abstract.

C.J. Moy and S.P.M. Bane, "Control of shockwave boundary layer interaction using plasma-assisted shock control bump," in 75th Annual Meeting of the Division of Fluid Dynamics, Indianapolis, IN, USA, Nov. 2022. Link to abstract.

J. Strafaccia and S.P.M. Bane, “A phenomenological model of nanosecond pulsed discharge effects on non-reacting flow in a 3-D swirl stabilized burner,” in AIAA SciTech 2021 Forum, Virtual, Jan. 2021. Link to abstract.

J. Zhang, L. Rajendran, S.P.M. Bane, and P. Vlachos, “Numerical uncertainty in density estimation for background oriented schlieren,” in 14^th International Symposium on Particle Image Velocimetry, Chicago, IL, USA, Aug. 2021. Link to abstract.

T. Zhou and S.P.M. Bane, "Control of shockwave boundary layer interaction using nanosecond pulsed plasma actuators," in 75th Annual Meeting of the Division of Fluid Dynamics, Indianapolis, IN, USA, Nov. 2022. Link to abstract.

Z. Mo, G. Song, J.S. Bolton, S. Lee, T. Shi, and Y. Seo, “Predicting acoustic performance of high surface area particle stacks with a poro-elastic model,” in INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Washington, D.C., USA, Aug. 2021. Link to abstract.

Z. Mo, T. Shi, S. Lee, Y. Seo, J.S. Bolton, “A poro-elastic model for activated carbon stacks,” in 6^th Symposium on the Acoustics for Poro-Elastic Materials (SAPEM 2020 + 1), West Lafayette, IN, USA, Jul. 2021, Link to proceedings.

Y. Xue, A. Dasyum, J.S. Bolton, and B. Sharma, “Acoustical investigation of aerogel granules modeled as a layer of poroelastic material,” in 6^th Symposium on the Acoustics of Poro-Elastic Materials (SAPEM 2020+1), West Lafayette, IN, April 2021. Link to abstract.

A. Woeppel, B.W. Boudouris, and S.P. Beaudoin, “Developing a flexible electrochemical sensor for trace detection of energetic materials,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

J. Gao, N. Kedir, C. Kirk, J. Hernandez, X. Zhai, J. Wang, T. Tallman, K. Fezzaa, and W. Chen, “Real-time visualization of damage progression inside GFRCs via high-speed X-ray PCI technique,” in Fraction, Fatigue, Failure and Damage, Volume 3: Conference Proceedings of the Annual Conference on Experimental and Applied Mechanics, March 2021, vol. 3, pp. 69–72. Link to abstract.

R. Jain, H. Hassan, W. Chen, T.N. Tallman, and N. Kedir, “Electrical self-sensing of pulsed laser ablation in nanofiller-modified composites,” in ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Virtual, Sept. 2021. Link to abstract.

Y. Wu and G.T.-C Chiu, “An improved height difference based model of height profile for drop-on-demand 3D printing With UV curable ink,” in 2021 American Control Conference, Jul. 2021, pp. 491–495. Link to abstract and proceedings.

D.N. Collard, J.A. Curtiss, M. Gomez, H.A. Bilbo, J.F. Rhoads, and S.F. Son, “Extrusion of AP composite propellant with self-aligned reactive fibers,” in AIAA Propulsion and Energy 2021 Forum, Jul. 2021. Link to abstract and video presentation.

J. Kastner, A. Joodaky, and J. Gibert, “The effectiveness of 2D unit cells in creating 𝝌-spring based metamaterials,” ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Virtual, Sept. 2021. Link to abstract.

M. J. Baier, A. J. McDonald, K. A. Clements, C.S. Goldenstein, and S.F. Son, “High-speed multi-spectral imaging of the hypergolic ignition of ammonia borane,” in Proceedings of the Combustion Institute, Jan. 2021, vol. 38, no. 3, pp. 4433–4440. Link to abstract.

Z. Chang, R.J. Tancin, V. Radhakrishna, R.P. Luct, and C.S. Goldenstein, “Broadband, mid-infrared laser-absorption measurements of temperature, CH₄, and C³H₈ in flames,” in AIAA Propulsion and Energy 2021 Forum, Virtual, Jul. 2021. Link to abstract.

G.C. Mathews, J.W. Stilborek, and C.S. Goldenstein, “Infrared laser-induced fluorescence with a continuous-wave optical parametric oscillator,” in Conference on Lasers and Electro-Optics: Applications and Technology 2021, May 2021, p. AW2S.6. Link to abstract.

A. J. McDonald, R. J. Tancin, M. D. Ruesch, and C.S. Goldenstein, “Spectrally resolved, 1d, mid-infrared imaging of temperature, CO₂, and HCL in AP-HTPB propellant flames,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

M. Gu, A. Satija, and R.P. Lucht, “CO₂ chirped-probe-pulse femtosecond CARS thermometry,” in Proceedings of the Combustion Institute, Jan. 2021, vol. 38, no. 1, pp. 1599–1606. Link to abstract.

V. Radhakrishna, R. J. Tancin, G. C. Mathews, R.P. Lucht, and C.S. Goldenstein, “Single-shot ultrafast-laser-absorption measurements of temperature, CO, NO, and H₂O in HMX fireballs,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

K. Clements, M. Ornek, T.D. Manship, D. Piercey, and S.F. Son, “A core-shell approach to greener solid propellant oxidizers,” in AIAA Propulsion and Energy 2021 Forum, Virtual, Jul. 2021. Link to abstract and video presentation.

D. Chowdhury, M.S. McClain, and K. Villez, “Automated dimension reduction with principal component analysis using area under curve,” in 2021 AlChE Annual Meeting, Boston, MA, Nov. 2021. Link to abstract.

M.S. McClain, B.T. Bojko, and S.F. Son, “Modeling of layered ammonium perchlorate composite propellant with different burning rates,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

M.S. McClain, D. Chowdhury, and K. Villez, “Selection of combined index weights to optimize anomaly detection in big area additive manufacturing,” in 2021 AlChE Annual Meeting, Boston, MA, Nov. 2021.

R. Yokoo, K. Goto, J. Kasahara, V. Athmanathan, J. Braun, G. Paniagua, T.R. Meyer, A. Kawasaki, K. Matsuoka, A. Matsuo, and I. Funaki, “Experimental study of internal flow structures in cylindrical rotating detonation engines,” in Proceedings of the Combustion Institute, Jan. 2021, vol. 38, no. 3, pp. 3759–3768. Link to abstract.

R. Alviani, J. Poggie, and G.A. Blaisdell, “Unsteady aspects of shock-wave/boundary-layer interaction resulting from control surface deflection,” in AIAA Aviation 2021 Forum, Jul. 2021. Link to abstract and video presentation.

B.J. Burke and J. Poggie, “Higher order simulation of unstart in a scramjet model,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

A.S. Deshpande and J. Poggie, “Dynamic mode decomposition of a highly confined shock-wave/boundary-layer interaction,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

A. Shuck, J. Poggie, and G. Blaisdell, “Preliminary computational study of transition on a flared cone using random forcing,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

A. Benhidjeb-Carayon, V. Boulos, C. White, J. R. Gabl, R. Orth, and T.L. Pourpoint, “Chemical composition of mixed oxides of nitrogen using Raman spectroscopy,” in AIAA Propulsion and Energy 2021, Jul. 2021. Link to abstract and video presentation.

A. Benhidjeb-Carayon, J.R. Gabl, and T.L. Pourpoint, “Helium solubility in mixed oxides of nitrogen,” in AIAA Propulsion and Energy 2021, Jul. 2021. Link to abstract and video presentation.

M.R. Orth, U. Pandey, and T.L. Pourpoint, “Preparation for pressure drop measurement in monolithic 3D-printed catalyst beds,” in AIAA Propulsion and Energy 2021 Forum, Jul. 2021. Link to abstract and video presentation.

C. Yilmaz, B.E. Whitehead, and T.L. Pourpoint, “Numerical & experimental investigation of a diffusor-ejector system performance using cold gas thrusters with conical & thrust optimized bell nozzles,” in AIAA Propulsion and Energy 2021 Forum, Jul. 2021. Link to abstract and video presentation.

A. Khot and B.M. Savoie, “Developing design rules for organic mixed ion-electron conducting polymers with coarse-grained molecular dynamics,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

B.M. Savoie, “Disrupting the TEMPO paradigm in radical conducting polymers,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

Q. Zhao, Y. Xu, J. Greeley, and B.M. Savoie, “Applying automated reaction prediction to heterogeneous catalysis problems,” in 2021 AlChE Annual Meeting, Boston, MA, USA, Nov. 2021. Link to abstract.

N.M. Lucarelli, J.-B. Chapelier, B. Wasistho, and C. Scalo, “Development of an explicitly filtered large-eddy simulation framework for the coherent-vorticity preserving (CvP) eddy viscosity correction,” in AIAA Aviation 2021 Forum, Jul. 2021. Link to abstract.

A.G. Martinez, B. Kuras, M.T. Migliorino, C. Scalo, and S.D. Heister, “Experimental demonstration of high-amplitude thermoacoustic instabilities under transcritical temperature conditions in a standing-wave device,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

V. Pulletikurthi, J.J. Redmond, C. Scalo, and L. Castillo, “Flow separation in a variable-area subsonic and transonic turbulent channel flow,” in Bulletin of the American Physical Society, vol. 66, no. 17, Nov. 2021. Link to abstract.

J.J. Philo, M.D. Frederick, and C.D. Slabaugh, “100 kHz PIV in a liquid-fueled gas turbine swirl combustor at 1 MPa,” in Proceedings of the Combustion Institute, vol. 38, no. 1, pp. 1571–1578, Jan. 2021. Link to abstract.

Z.M. Ayers, A.I. Lemcherfi, E. Plaehn, C.D. Slabaugh, T.R. Meyer, C.A. Fugger, and S. Roy, “Application of 100 khz acetone-plif for the investigation of mixing dynamics in a self-excited linear detonation channel,” in AIAA Scitech 2021 Forum, Jan. 2021, pp. 1–11. Link to abstract.

G. C. Mathews, M. G. Blaisdell, A. I. Lemcherfi, C.D. Slabaugh, and C.S. Goldenstein, “High-bandwidth laser-absorption measurements of temperature, pressure, CO, and H₂O in the annulus of a rotating detonation rocket engine,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

C.T. McDonald, J.J. Philo, T.T. Shahin, R. Gejji, C.D. Slabaugh, and R.P. Lucht, “Effect of fuel temperature on emissions and structure of a swirl-stabilized flame,” in AIAA Propulsion and Energy 2021 Forum, Jul. 2021. Link to abstract and video presentation.

C.A. Fugger, P.S. Hsu, N. Jiang, S. Roy, M.N. Slipchenko, V. Athmanathan, A. Webb, J. Fisher, and T.R. Meyer, “Megahertz oh-plif imaging in a rotating detonation engine,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

M.N. Slipchenko, T.R. Meyer, and S. Roy, “Advances in burst-mode laser diagnostics for reacting and nonreacting flows,” in Proceedings of the Combustion Institute, Jan. 2021, vol. 38, no. 1, pp. 1533–1560. Link to abstract and article.

R.J. Appleton, A.D. Casey, B.C. Barnes, A.H. Strachan, P. Salek, and S.F. Son, "Interpretable performance models for energetic materials using parsimonious neural networks," in Bulletin of the American Physical Society, vol. 67, no. 3, Chicago, IL, March 2022. Link to abstract.

S. McGrane, M. Powell, M. Sakano, M. Cawkwell, P. Bowlan, K.E. Brown, C. Bolme, D.S. Moore, S.F. Son, A. Strachan, “Insight into the chemistry of PETN under shock compression through ultrafast broadband mid-infrared and visible absorption spectroscopies,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

M. Ruesch, A.J. McDonald, G.C. Mathews, S.F. Son, and C.S. Goldenstein, “Characterization of the influence of aluminum particle size on the temperature of composite-propellant flames using CO absorption and AlO emission spectroscopy,” in Proceedings of the Combustion Institute, Jan. 2021, vol. 38, no. 3, pp. 4365–4372. Link to abstract.

M. Ruesch, S.F. Son, and C.S. Goldenstein, “Characterization of aluminum-lithium composite-propellant flames via laser absorption spectroscopy,” in AIAA Scitech 2021 Forum, Jan. 2021. Link to abstract.

B.W. Hamilton, B.A. Steele, M. Sakano, M. Kroonblawd, I-F. W. Kuo, A. Strachan, “Atomistic predictions of reaction mechanisms, kinetics, and detonation properties for the insensitive explosive LLM-105,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

B.W. Hamilton and A. Strachan, “Shock-induced chemistry and chain relaxation dynamics via molecular dynamics,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

C. Li, M.N. Sakano, and A. Strachan, “Hotspot formation in amorphous energetic materials due to shock-induced void collapse,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

M.N. Sakano, E. Kober, and A. Strachan, “Reduced order chemistry models for RDX decomposition using unsupervised and self-supervised learning techniques,” in Bulletin of the American Physical Society, Mar. 2021. Link to abstract.

S. Zhang, “High-speed 3D imaging with digital fringe projection techniques,” in Tribute to James W. Wyant: The Extraordinaire in Optical Metrology and Optics Education (vol. 11813), SPIE Optical Engineering + Applications, San Diego, CA, USA, 2021. Link to abstract.

Patents:

T.Q. Aminu and D.F. Bahr, "Systems having polymeric fibers with metallic nanoparticles thereon and methods of fabrication," US20220112654A1, 2022. Link to patent application.

L.A. Stanciu-Gregory, J.P. Allebach, G.T.-C. Chiu, L.S. Diaz, and M. Zhao, “Multifluidic device and processing system for colorimetric multiplexed detection of a substance,” US20210231646, 2021. Link to patent application.

P. C. Sweeney, S.D. Heister, S. A. Hunt, C. Scalo, and M. Tindaro Migliorino, “System and method for stabilizing transcritical air-to-fuel heat exchange,” US10890114B2, 2021. Link to patent application.

J.F. Rhoads, E.A Nauman, M. Tweardy, M. Wadas, A.K. Murray, G.T.-C. Chiu, and N. Bajaj, “Method of detecting a substance,” US10948489B2, 2021. Link to patent application.

J.F. Rhoads, I.E. Gunduz, S.F. Son, and G.T.-C. Chiu, “Methods and apparatus for 3D printing of highly viscous materials,” US20210046701A1, 2021. Link to patent application.

S.C. Jones, V.K. Davis, C.M. Bates, N. Momcilovic, B.M. Savoie, M.A. Webb, T.F. Miller, R.H. Grubbs, C. Brooks, and K. Omichi, “Non-aqueous fluoride salts, solutions, and their uses,” US20210218063A1, 2021. Link to patent application.

J.R. Gord, S. Roy, P.S. Hsu, N. Jiang, and M.N. Slipchenko, “System and methods for high-speed, spectroscopic, gas-phase thermometry,” US20210164841A1, 2021. Link to patent application.

S. Isert, S.F. Son, C.D. Lane, and I.E. Gunduz, “Reactive burning rate accelerators, solid energetic materials comprising the same, and methods of using the same,” US11008263B2, 2021. Link to patent application.