Skip navigation
Computational Fluid Dynamics and Heat Transfer Lab

Publications

Papers in the Past Two Years

  • Shih, T.I-P. and Yang, V., Editors, Turbine Aerodynamics, Heat Transfer, Materials, and Mechanics, Progress in Astronautics and Aeronautics, Vol. 243, American Institute of Aeronautics and Astronautics, 2014.
  • Shih, T. I-P. and Durbin, P., “Modeling and Simulation of Turbine Cooling,” in Turbine Aerodynamics, Heat Transfer, Materials, and Mechanics, Editors: T. Shih and V. Yang, Progress in Astronautics and Aeronautics, Vol. 243, American Institute of Aeronautics and Astronautics, 2014, pp. 389-421.
  • Ramachandran, S.G. and Shih, T. I-P., “Biot-Number Analogy for Design of Experiments in Turbine Cooling,” ASME Journal of Turbomachinery, Vol. 137, June 2015, pp. 061002-1 to 061002-14.
  • Sathyanarayanan, S.K., Ramachandran, S.G., and Shih, T.I-P., “Time-Accurate CFD Conjugate Analysis of Transient Measurements of the Heat-Transfer Coefficient,” AIAA Paper 2015-1195, AIAA Sci Tech, Jan. 2015.
  • Pardeshi, I., Shih, T.I-P., Bryden, K.M., Ames, R., Dennis, R.A., Ding, S., Xu, G., Deng, H., and Lu, R., “Flow and Heat Transfer in a Rotating and Non-Rotating Wedge-Shaped Cooling Passage with Ribs and Pin Fins,” AIAA Paper 2015-1444, AIAA Sci Tech, Jan. 2015.
  • Liu, J., Weaver, A., Shih, T. I-P., Sangan, C.M., and Lock, G.D., “Modelling and Simulation of Ingress into the Rim Seal and Wheelspace of a Gas-Turbine Rotor-Stator Configurations,” AIAA Paper 2015-1445, AIAA Sci Tech, Jan. 2015.
  • Weaver, A.M., Liu, J., and Shih, T.I-P., “A Weave Design for Trailing-Edge Cooling,” AIAA Paper 2015-1446, AIAA Sci Tech, Jan. 2015.
  • Stratton, Z., Shih, T.I-P., Laskowski, G., Briggs, R., and Barr, B., “Effects of Cross Flow in an Internal-Cooling Channel on Film Cooling of a Flat Plate through Compound –Angle Holes,” ASME Paper GT-2015-42771, Montreal, Canada, June 2015.
  • Lee, C.-S., Shih, T.I-P., and Bryden, K.M., “Estimating Over Temperature and Its Duration in a Flat Plate with Sudden Changes in Heating and Cooling,” ASME Paper GT-2015-43526, Montreal, Canada, June 2015.
  • Shih, T.I-P., Lee, C.-S., and Bryden, K.M., “Effects of Averaging the Heat-Transfer Coefficient on the Predicted Material Temperature Distribution,” ASME Paper GT-2015-43552, Montreal, Canada, June 2015.
  • Lee, C.-S., Shih, T.I-P., and Bryden, K.M., “Estimating Over Temperature and Its Duration in a Flat Plate with Sudden Changes in Heating and Cooling,” ASME Journal of Turbomachinery, Vol. 138, June 2016, 061007-1 to 061007-12 (doi: 10.1115/1.4032306).
  • Zhang, J., Li, W., Shih, T.I-P., Zhang, Y., and Niu, Y., “Heat Transfer and Pressure Drop Characteristics of Condensation for R410A in a 3.78mm Circular Tube Under Normal and Micro Gravity,” ASME Paper HT2016-7045, ASME 2016 Summer Heat Transfer Conference, Washington, DC, 10-14 July 2016.
  • Zhang, J., Li, W., Shih, T.I-P., Zhang, Y., and Niu, Y., “Numerical Simulation of Condensation for R410A in Circular and Square Mini Channels,” ASME Paper HT2016-7960, ASME 2016 Summer Heat Transfer Conference, Washington, DC, 10-14 July 2016.
  • Lee, C.-S., Shih, T.I-P., and Bryden, K.M., “Effects of Averaging the Heat-Transfer Coefficient on the Predicted Material Temperature and Its Gradient,” ASME Journal of Heat Transfer, Vol. 139, Feb. 2017, 022002-1 to 022002-14 (doi: 10.1115/1.4034698).
  • Sathyanarayanan, S.K. and Shih, T.I-P., “Time-Accurate Conjugate Analysis of Transient Measurements of Heat-Transfer Coefficients,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 31, 2017, DOI: 10.2514/1.T4723 (https://arc.aiaa.org/doi/10.2514/1.T4723).
  • Li, W., Zhang, J., Mi, Zhao, Tao, Z., Childs, P., and Shih, T.I-P., “The Effect of Gravity on R410A Condensing Flow in Horizontal Circular Tubes,” Numerical Heat Transfer, Part A: Applications, Vol. 71, No. 3, 2017, pp. 327-340 (https://dx.doi.org/10.1080/10407782.2016.1264743). 
  • Zhang, W. and Shih, T.I-P., “An Adaptive Downstream Anisotropic Eddy-Viscosity Model for Hybrid RANS/LES Simulations,” AIAA 2017-0977, AIAA Sci Tech, Jan. 2017.
  • Shih, T.I-P., Lee, C.-S., and Bryden, K.M., “Scaling Heat-Transfer Coefficients Measured under Laboratory Conditions to Engine-Relevant Conditions,” ASME Paper GT2017-64039, June 2017.
  • Town, J., Straub, D., Blak, J., Thole, K., and Shih, T.I-P., “State-of-the-Art Cooling Technology for a Turbine Rotor Blade,” ASME Paper GT2017-64728, June 2017.