Publications

Archival Journal Papers

[¹³⁰] Inhestern L., Peitsch D., Paniagua G., 2023, “Flow irreversibility and heat transfer effects on turbine efficiency”. Applied Energy. Vol. 353, paper 122077, pp 1-15. October. https://doi.org/10.1016/j.apenergy.2023.122077. ISSN: 0306-2619.

[¹²⁹] Braun J., Rahbari I., Aye Addo N., Paniagua G., Garicano J., Valero E., la Clanche M., 2023, “Characterization of shock-separation phenomena over wavy shaped geometries through reduced order models”. Experimental Thermal and Fluid Science. Vol. 150. Paper 111021, pp 1-18. August. https://doi.org/10.1016/j.expthermflusci.2023.111021. ISSN: 0894-1777.

[¹²⁸] Salinas S., Castillo A., Bloxham M., Paniagua G., 2023, “Comprehensive sensor gap calibration for high-speed fluid machinery tip clearance characterization”. Measurement. Vol. 218, paper 113117, pp 1-20. August. https://doi.org/10.1016/j.measurement.2023.113117. ISSN: 0263-2241.

[¹²⁷] Inhestern L., Peitsch D., Paniagua G., 2023, “Underlying Physics of the starting of supersonic nozzles”. Aerospace science and technology. Vol. 139, paper 108404, pp 1-15. August. https://doi.org/10.1016/j.ast.2023.108404. ISSN: 1270-9638.

[¹²⁶] Rebassa A., Rahbari I, Paulson J., Paniagua G., 2023, “Aerothermal characterization of finned surfaces in high-speed flows”. Applied Thermal Engineering. Vol. 227, paper 120331 (14 pages). June. https://doi.org/10.1016/j.applthermaleng.2023.120331. ISSN: 1359-4311.

[¹²⁵] Nowak H., Lluesma-Rodriguez F., Rahbari I., Clark J., Paniagua G., 2023, “Response of separated boundary layers to steady and pulsated flow injection in transonic internal flows”. Journal of Engineering for Gas Turbines and Power. Vol. 145, paper 061001 (14 pages). June. https://doi.org/10.1115/1.4056184. ISSN: 0742-4795.

[¹²⁴] Kasahara J., Nakata K., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2023, “Experimental investigation of inner flow of a throat less diverging rotating detonation engine”. Proceedings of the Combustion Institute. June. https://doi.org/10.1016/j.proci.2022.08.089. ISSN: 1540-7489.

[¹²³] Vyas U., Braun J., Andreoli V., Paniagua G., 2023, “Short engine intakes: Design and trade-off aerodynamic recommendations”. Aerospace science and technology. Vol. 134, paper 108164 (16 pages). March. https://doi.org/10.1016/j.ast.2023.108164. ISSN: 1270-9638.

[¹²²] Huber K., Rodiger T., Bhatnagar L., Paniagua G., 2023, “Atomic Layer Thermopiles: Comprehensive Calibration, Comparison and Application in High Speed Internal Flows”. International Journal of Thermal Sciences. January. Vol. 183, pp 107881. https://doi.org/10.1016/j.ijthermalsci.2022.107881. ISSN: 1290-0729.

[¹²¹] Vilag V., Paniagua G., Vladuca I., Sanchez de la Rosa D., Suciu C., 2022, “Traverse gear system for measuring probes angular positioning into the BRASTA wind tunnel”. TURBO Scientific Journal. Vol 9, No. 2, pp 19-26. December. http://www.comoti.ro/docs/jurnal/Journal%20TURBO_Vol%20IX_No_2.pdf. ISSN: 2559-608X.

[¹²⁰] Sousa J., Paniagua G., Collado E., 2022, “Supersonic turbine design suitable for detonation based engines”. Chinese Journal of Aeronautics. November. https://doi.org/10.1016/j.cja.2022.04.003. ISSN: 1000-9361.

[¹¹⁹] Lui H.F.S., Riccardi T.R., Wolf W.R., Braun J., Rahbari I., Paniagua G., 2022, “Unsteadiness of shock-boundary layer interactions in a Mach 2.0 supersonic turbine cascade”. Physical Review Fluids. Vol. 7, Paper 094602. September. https://doi.org/10.1103/PhysRevFluids.7.094602. ISSN: 2469-990X.

[¹¹⁸] Lozano F., Saavedra J., Paniagua G., 2022, “Aero-thermal numerical characterization of blunt fin-induced shock wave-boundary layer interaction and its control leading-edge cooling injection”. Physics of Fluids. Vol. 34, Issue 9. September. https://doi.org/10.1063/5.0102243. ISSN: 1070-6631.

[¹¹⁷] Carbajosa C., Martinez-Cava A., Valero E., Paniagua G., 2022, “Efficiency of pulsating base bleeding to control trailing edge flow configurations”. Applied Sciences. July. https://doi.org/10.3390/app12136760. ISSN: 2076-3417.

[¹¹⁶] Lozano F., Rahbari I., Lin G., Paniagua G., 2022, “Stochastic boundary condition effects on supersonic leading-edge blowing”. Computers and Fluids. Vol. 243. July. https://doi.org/10.1016/j.compfluid.2022.105513. ISSN: 0045-7930.

[¹¹⁵] Nakata K., Ota K., Ito S., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Kasahara J., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2022, “Supersonic exhaust from a rotating detonation engine with throatless diverging channel”. AIAA Journal. July. Vol.60, Issue 7, pp 4015-4023. https://doi.org/10.2514/1.J061300. ISSN: 0001-1452.

[¹¹⁴] Braun J., Falempin F., Paniagua G., 2022, “Energy analysis of a detonation combustor with a bladeless turbine, a propulsion unit for subsonic to hypersonic flight”. Energy Conversion and Management. June. https://doi.org/10.1016/j.enconman.2022.115491. ISSN: 0196-8904.

[¹¹³] Athmanathan V., Braun J., Ayers Z.M., Fugger C., Webb A.M., Slipchenko M., Paniagua G., Roy S., Meyer T., 2022, “On the effects of reactant stratification and wall curvature in a non-premixed rotating detonation combustor”. Combustion and Flame. Vol. 240, paper 112013 (17 pages). June. https://doi.org/10.1016/j.combustflame.2022.112013. Most downloaded paper. ISSN: 0010-2180.

[¹¹²] Aye-Addo P.A.N., Paniagua G., Gonzalez-Cuadrado D., Bhatnagar L., Castillo A., Braun J., Gomez-Gomez M., Meyer T., Bloxham M., 2022, “Development of a lifetime pressure sensitive paint procedure for high-pressure vane testing”. Journal of Turbomachinery. Vol. 144, paper 051005-1 (11 pages). May. https://doi.org/10.1115/1.4052739. ISSN: 0889-504X.

[¹¹¹] Saavedra J., Grossier G., Chazot O., Paniagua G., 2022, “Start-up analysis of a hypersonic short duration facility”. AIAA Journal. April. https://doi.org/10.2514/1.J060306. ISSN: 0001-1452.

[¹¹⁰] Krane P., Gonzalez Cuadrado D., Lozano F., Paniagua G., Marconnet A., 2022, “Sensitivity-coefficient based inverse heat conduction method for identifying hot spots in electronics: A comparison of grid refinement methods”. Journal of Electronic Packaging. Vol. 144, Issue 1, paper 011008 (10 pages). March. https://doi.org/10.1115/1.4050200. ISSN: 1043-7398.

[¹⁰⁹] Bhatnagar L., Paniagua G., Gonzalez-Cuadrado D., Aye-Addo P.A.N., Castillo A., Lozano F., Bloxham M., 2022, “Uncertainty in high-pressure stator performance measurement in an annular cascade at engine-representative Reynolds and Mach”. Journal of Engineering for Gas Turbines and Power. Vol. 144, paper 021001 (11pages). February. https://doi.org/10.1115/1.4052385. ISSN: 0742-4795.

[¹⁰⁸] Andreoli V., Paniagua G., Bloxham M., 2021, “Towards desensitization of gas turbines performance to tip clearance design optimization and engine analysis”. Energy Conversion and Management. Vol. 245, paper 114575 (14 pages). October. https://doi.org/10.1016/j.enconman.2021.114575. ISSN: 0196-8904.

[¹⁰⁷] Athmanathan V., Rahman K.R., Lauriola D., Braun J., Paniagua G., Slipchenko M., Roy S., Meyer T., 2021, “Femtosecond/picosecond rotational coherent anti-Stokes Raman scattering thermometry in the exhaust of a rotating detonation combustor”. Combustion and Flame. Vol. 231, paper 111504 (12 pages). September. https://doi.org/10.1016/j.combustflame.2021.111504. ISSN: 0010-2180.

[¹⁰⁶] Saavedra J., Paniagua G., 2021, “Experimental analysis of Reynolds effect on flow detachment and sudden flow release on a wall mounted hump”. Experimental Thermal and Fluid Science. Vol. 126, paper 110398 (13 pages). August. https://doi.org/10.1016/j.expthermflusci.2021.110398. ISSN: 0894-1777.

[¹⁰⁵] De Maesschalck C., Andreoli V., Paniagua G., Gillen T., Barker B., 2021, “Aerothermal optimization of turbine squealer tip geometries with arbitrary cooling injection”. Journal of Turbomachinery. Vol. 143, Issue 11, paper 111010 (12 pages). June. https://doi.org/10.1115/1.4051268. ISSN: 0889-504X.

[¹⁰⁴] Martinez Cava A., Rodriguez D., Valero E., Paniagua G., 2021, “Characterization of base bleed effects on subsonic trailing edge flows”. Aerospace science and technology. Vol. 113, paper 106730 (11 pages). June. https://doi.org/10.1016/j.ast.2021.106730. ISSN: 1270-9638.

[¹⁰³] Saavedra J., Lozano F., Paniagua G., Fisher J., Webb A., Meyer T., 2021, “Flow conditioning for tri-sonic blow down wind tunnels”. Flow Measurement and Instrumentation. Vol. 79, paper 101910 (19 pages). June. https://doi.org/10.1016/j.flowmeasinst.2021.101910. ISSN: 0955-5986.

[¹⁰²] Inman D., Gonzalez Cuadrado D., Andreoli V., Fisher J., Paniagua G., Aye-Addo A. N., Bhatnagar L., Lozano F., Meyer T., Bloxham M., 2021, “Particle Image Velocimetry in a High-Pressure Turbine Stage at Aerodynamically Engine Representative Conditions”. Journal of Engineering for Gas Turbines and Power. Vol. 143, Issue 6, paper 061031 (10 pages). June. https://doi.org/10.1115/1.4049448. ISSN: 0742-4795. 

[¹⁰¹] Rahbari I., Cukurel B., Paniagua G., 2021, “Acoustic pulsation for heat transfer abatement in supersonic channel flow”. Physics of Fluids. Vol. 33. Issue 3, paper 035104 (14 pages). March. https://doi.org/10.1063/5.0037078. ISSN: 1070-6631.

[¹⁰⁰] Braun J., Paniagua G., Falempin F., 2021, “Aero-thermal Optimization of Bladeless Turbines”. Journal of Engineering for Gas Turbines and Power. Vol. 143, Issue 3, paper 031023 (11 pages). March. https://doi.org/10.1115/1.4049355. ISSN: 0742-4795. 

[⁹⁹] Yokoo R., Goto K., Kasahara J., Athmanathan V., Braun J., Paniagua G., Meyer T., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., 2021, “Experimental study of internal flow structures in cylindrical rotating detonation engines”. Proceedings of the Combustion Institute. Vol. 38, Issue 3, pp. 3759-3768. March. https://doi.org/10.1016/j.proci.2020.08.001. ISSN: 1540-7489.

[⁹⁸] Saavedra J., Athmanathan V., Paniagua G., Meyer T., Straub D., Black J., Ramesh S., 2021, “Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green´s Functions”. Journal of Turbomachinery. Vol. 143, Issue 2, 021005. (16 pages). February. https://doi.org/10.1115/1.4049613. ISSN: 0889-504X. 

[⁹⁷] Wang Y., Ferrer E., Paniagua G., Saavedra J., Valero E., 2021, “Stability analysis-based optimization to control flow separation over a diffusing passage”. Physics of Fluids. January. Vol. 33, 014103 (12 pages). https://doi.org/10.1063/5.0034892. ISSN: 1070-6631.

[⁹⁶] Lozano F., Paniagua G., 2020, “Airfoil leading edge blowing to control bow shock waves”. Nature Scientific Reports. Vol. 10, 21922. (18 pages). December. https://doi.org/10.1038/s41598-020-79048-w. ISSN: 2045-2322.

[⁹⁵] Liu Z, Braun J., Paniagua G., 2020, “Thermal power plant upgrade via a rotating detonation combustor and retrofitted turbine with optimized endwalls”. International Journal of Mechanical Sciences. Vol. 188, paper 105918 (11 pages). December. https://doi.org/10.1016/j.ijmecsci.2020.105918. ISSN: 0020-7403.

[⁹⁴] Juangphanich P., Paniagua G., 2020, “Aero-thermal optimization of the rim seal cavity to enhance rotor platform thermal protection”. International Journal of Turbo & Jet-Engines. (12 pages). September. https://doi.org/10.1515/tjj-2020-0020. ISSN: 0334-0082. 

[⁹³] Liu Z, Braun J., Paniagua G., 2020, “Integration of a transonic high-pressure turbine with a rotating detonation combustor and a diffuser”. International Journal of Turbo & Jet-Engines. (10 pages). July. https://doi.org/10.1515/tjeng-2020-0016. ISSN: 0334-0082.

[⁹²] Gonzalez Cuadrado D., Lozano F., Paniagua G., 2020, “Experimental demonstration of inverse heat transfer methodologies for turbine applications”. Journal of Turbomachinery. Vol. 142, Issue 6, paper 061009 (10 pages). June. https://doi.org/10.1115/1.4046546. ISSN: 0889-504X. 

[⁹¹] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2020, “Non-linear non-iterative transient inverse conjugate heat transfer method applied to microelectronics”. International Journal of Heat and Mass Transfer. Vol. 152, paper 119503 (12 pages). May. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119503. ISSN: 0017-9310.

[⁹⁰] Saavedra J, Poggie J., Paniagua G., 2020, “Response of a turbulent boundary layer to rapid freestream acceleration”. Physics of Fluids. Vol. 32, Issue 4, paper 045105 (22 pages). April. https://doi.org/10.1063/5.0004421. ISSN: 1070-6631.

[⁸⁹] Braun J., Paniagua G., Falempin F., Le Naour B., 2020, “Design and experimental assessment of bladeless turbines for axial inlet supersonic flows”. Journal of Engineering for Gas Turbines and Power. Vol. 142, Issue 4, paper 041024 (10 pages). April. https://doi.org/10.1115/1.4045359. ISSN: 0742-4795.

[⁸⁸] Inhestern L.B., Braun J., Paniagua G., Serrano J.R., 2020, “Design, optimization and analysis of supersonic radial turbines”. Journal of Engineering for Gas Turbines and Power. March. Vol. 142, Issue 3, paper 031023 (12 pages). https://doi.org/10.1115/1.4044972. ISSN: 0742-4795.

[⁸⁷] Fisher J., Braun J., Meyer T., Paniagua G., 2020, “Application of Femtosecond Laser Electronic Tagging Velocimetry in a bladeless turbine”. Measurement Science and Technology. Vol. 31, Number 6, paper 064005 (11 pages). March. https://doi.org/10.1088/1361-6501/ab7062. ISSN: 0957-0233. 

[⁸⁶] Rahbari I., Paniagua G., 2020, “Acoustic streaming in turbulent compressible channel flow for heat transfer enhancement”. Journal of Fluid Mechanics. Vol. 889, A2, (22 pages). February. https://doi.org/10.1017/jfm.2020.69. ISSN: 0022-1120.

[⁸⁵] Agarwal T., Rahbari I., Saavedra J., Paniagua G., Cukurel B., 2020, “Multi-fidelity analysis of acoustic streaming in forced convection heat transfer”. Journal of Heat Transfer. Vol. 142, Issue 2, paper 021801 (12 pages). February. https://doi.org/10.1115/1.4045306. ISSN: 0022-1481.

[⁸⁴] Bottini H., Saracoglu B., Paniagua G., 2019, “Experimental characterization of the supersonic transitional wake downstream a single roughness element”. Journal of Thermal Science. Vol. 29, pp. 1085–1093. November. https://doi.org/10.1007/s11630-019-1198-1. ISSN: 1003-2169.

[⁸³] Juangphanich P., De Maesschalck C., Paniagua G., 2019, “Turbine passage design methodology to minimize entropy production, a two step optimization strategy”. Entropy. Vol 21, Issue 6, (17 pages). June. http://dx.doi.org/10.3390/e21060604. ISSN: 1099-4300. 

[⁸²] Andreoli V., Braun J., Paniagua G., De Maesschalck C., Bloxham M., Cummings W., Langford L., 2019, “Aerothermal optimization of fully cooled turbine blade tips”. Journal of Turbomachinery. Vol. 141. Issue 6, 061007, (10 pages). June. https://doi.org/10.1115/1.4041961. ISSN: 0889-504X.

[⁸¹] Saavedra J., Paniagua G., Chazot O., 2019, “Thermal boundary layer response to periodic fluctuations”. Journal of Engineering for Gas Turbines and Power. Vol. 141. Issue 3, paper 031009, (9 pages). March.  http://dx.doi.org/10.1115/1.4041138. ISSN: 0742-4795. 

[⁸⁰] Liu Z., Braun J., Paniagua G., 2019, “Characterization of a supersonic turbine downstream of a rotating detonation combustor”. Journal of Engineering for Gas Turbines and Power. Vol. 141. Issue 3, paper 031501 (13 pages). March. http://dx.doi.org/10.1115/1.4040815. ISSN: 0742-4795. 

[⁷⁹] Paniagua G., Gonzalez Cuadrado D., Saavedra J., Andreoli V., Meyer T., Solano J.P., Herrero R., Meyer S., Lawrence D., 2019, “Design of the Purdue Experimental Turbine Aerothermal Laboratory for optical and surface aero-thermal measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 012601 (13 pages). January. http://dx.doi.org/10.1115/1.4040683. ISSN: 0742-4795.

[⁷⁸] Gonzalez Cuadrado D., Lozano F., Andreoli V., Paniagua G., 2019, “Engine scalable rotor casing convective heat flux evaluation using inverse heat transfer methods”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 011012 (10 pages). January. http://dx.doi.org/10.1115/1.4040713. ISSN: 0742-4795. 

[⁷⁷] Saavedra J., Paniagua G., 2019, “Transient performance of separated flows: Characterization and active flow control”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 011002 (11 pages). January. http://dx.doi.org/10.1115/1.4040685. ISSN: 0742-4795.

[⁷⁶] Xisto C., Petit O., Lundbladh A., Gronstedt T., Rolt A., Paniagua G., 2018, “The Efficiency of a Pulsed Detonation Combustor-Axial Turbine Integration”. Aerospace science and technology. Vol 82-83, pp 80-91. November. https://doi.org/10.1016/j.ast.2018.08.038. ISSN: 1270-9638.

[⁷⁵] Villafañe L., Paniagua G., 2018, “Aerodynamic impact of finned heat exchangers on transonic flows”. Experimental Thermal and Fluid Science. Vol. 97, pp 223-236. October. https://doi.org/10.1016/j.expthermflusci.2018.04.012. ISSN: 0894-1777.

[⁷⁴] Saavedra J, Paniagua G., Lavagnoli S., 2018, “On the transient response of the turbulent boundary layer inception in compressible flows”. Journal of Fluid Mechanics. Vol. 850, pp 1117-1141. September. http://dx.doi.org/10.1017/jfm.2018.502. ISSN: 0022-1120. 

[⁷³] Andreoli V., Gonzalez Cuadrado D., Paniagua G., 2018, “Prediction of the Turbine Tip Convective Heat Flux Using Discrete Green Functions”. Journal of Heat Transfer. Vol. 140, paper 071703 (11 pages). July. http://doi.org/10.1115/1.4039182. ISSN: 0022-1481.

[⁷²] Braun J., Sousa J, Paniagua G., 2018, “Numerical assessment of the convective heat transfer in rotating detonation combustors using a reduced order model”. Applied Sciences. Vol. 8, Issue 6, 893, (15 pages). May. https://doi.org/10.3390/app8060893. ISSN: 2076-3417. 

[⁷¹] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2018, “Inverse Conduction Heat Transfer and Kringing Interpolation Applied to Temperature Sensor Location in Microchips”. Journal of Electronic Packaging. Vol. 140, paper 010905 (8 pages). March. http://doi.org/10.1115/1.4039026. ISSN: 1043-7398.

[⁷⁰] Liu Z., Paniagua G., 2018, “Design of directional probes for high-frequency turbine measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 140, paper 011601 (10 pages). January. https://doi.org/10.1115/1.4037640. ISSN: 0742-4795.

[⁶⁹] Sousa J., Braun J., Paniagua G., 2017, “Development of a fast evaluation tool for rotating detonation combustors”. Applied Mathematical Modelling. Vol. 52, pp 42-52, December. https://doi.org/10.1016/j.apm.2017.07.019. ISSN: 0307-904X.

[⁶⁸] Sousa J, Paniagua G., Collado Morata E., 2017, “Thermodynamic analysis of a gas turbine engine with a rotating detonation combustor”. Applied Energy. Vol. 195, pp 247-256, June. https://doi.org/10.1016/j.apenergy.2017.03.045. ISSN: 0306-2619.

[⁶⁷] Sousa J., Paniagua G., Saavedra J., 2017, “Aerodynamic response of internal passages to pulsating inlet supersonic conditions”. Computers and Fluids. Vol. 149, pp 31-40. June. https://doi.org/10.1016/j.compfluid.2017.03.005. ISSN: 0045-7930.

[⁶⁶] Braun J., Saracoglu B.H, Paniagua G., 2017, “Unsteady performance of rotating detonation engines with different exhaust nozzles”. Journal of Propulsion and Power. Vol. 33, pp 121-130. June. https://doi.org/10.2514/1.B36164. ISSN: 0748-4658.

[⁶⁵] Saavedra J., Paniagua G., Saracoglu B., 2017, “Experimental characterization of the vane heat flux under pulsating trailing-edge blowing”. Journal of Turbomachinery. Vol. 139, pp 1-7. June. https://doi.org/10.1115/1.4035211. ISSN: 0889-504X.

[⁶⁴] De Maesschalck C., Lacor C., Paniagua G., Lavagnoli S., Remiot A., Bricteux L., 2017, “Performance Robustness of Turbine Squealer Tip Designs due to Manufacturing and Engine Operation”. Journal of Propulsion and Power. Vol. 33, pp 740-749. April. https://doi.org/10.2514/1.B36081. ISSN: 0748-4658.

[⁶³] Ornano F., Braun J., Saracoglu B.H, Paniagua G., 2017, “Multi-stage nozzle shape optimization for pulsed hydrogen-air detonation combustor”. Advances in Mechanical Engineering. Vol. 9, pp 1–9. February. https://doi.org/10.1177/1687814017690955. ISSN: 1687-8132. 

[⁶²] De Maesschalck C., Lavagnoli S., Paniagua G., Verstraete T., Olive R., Picot P., 2016, “Heterogeneous Optimization Strategies for Carved and Squealer-like Turbine Blade Tips”. Journal of Turbomachinery. Vol. 138, Issue 12, pp 1-12. December. http://doi.org/10.1115/1.4033975. ISSN: 0889-504X.

[⁶¹] Braun J., Saracoglu B.H, Magin T., Paniagua G., 2016, “One-dimensional analysis of the MagnetoHydrodynamic effect in Rotating Detonation Combustors”. AIAA Journal. Vol. 54, pp 3761-3767. October. https://doi.org/10.2514/1.J054989. ISSN: 0001-1452.

[⁶⁰] Vinha N., Paniagua G., Sousa J., Saracoglu B., 2016, “Axial bladeless turbine suitable for high supersonic flows”. Journal of Propulsion and Power. Vol. 32, issue 4, pp 975-983. June. http://doi.org/10.2514/1.B35818. ISSN: 0748-4658.

[⁵⁹] Andreoli V., Lavagnoli S., Paniagua G., Fernandez Villace V., 2016, “Robust Model of a Transient Wind Tunnel for Off-Design Aerothermal Testing of Turbomachinery”. Measurement. Vol. 82, pp 323-333. March. http://doi.org/10.1016/j.measurement.2015.12.032. ISSN: 0263-2241.

[⁵⁸] Gonzalez Cuadrado D., Lavagnoli S., Paniagua G., 2016, “Methodology to correct the magnetic field effect on thin film measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 138, Issue 3, 031602, pp 1-8. March. http://doi.org/10.1115/1.4031321. ISSN: 0742-4795.

[⁵⁷] Lavagnoli S., De Maesschalck C., Paniagua G., 2015, “Analysis of the heat transfer driving parameters in tight rotor blade tip clearances”. Journal of Heat Transfer. Vol. 138, Issue 1, pp 1-11. August. http://doi.org/10.1115/1.4031131. ISSN: 0022-1481.

[⁵⁶] Sousa J., Paniagua G., 2015, “Entropy minimization design approach of supersonic internal passages”. Entropy. Vol. 17, Issue 8, pp 5593-5610. July. http://doi.org/10.3390/e17085593. ISSN: 1099-4300.

[⁵⁵] Bianchi G., Saracoglu B.H., Paniagua G., Regert T., 2015, “Experimental analysis on the effects of DC arc discharge at various flow regimes”. Physics of fluids. Vol. 27, 036102, (14 pages). March. http://doi.org/10.1063/1.4914868. ISSN: 1070-6631.

[⁵⁴] Lavagnoli S., De Maesschalck C., Paniagua G., 2015, “Uncertainty analysis of adiabatic wall temperature measurements in turbine experiments”. Applied Thermal Engineering. Vol. 82, pp 170-181. March. http://doi.org/10.1016/j.applthermaleng.2015.02.048. ISSN: 1359-4311.

[⁵³] Villafañe L., Paniagua G., Bonfanti G., Yasa T., 2015, “Local surface shear stress measurements from oil streaks thinning rate”. Sensors and actuators A: Physical. Vol. 223, pp 31-39. March. https://doi.org/10.1016/j.sna.2014.12.013. ISSN: 0924-4247. 

[⁵²] Bottini H., Paniagua G., Schreivogel P., Sonda A., de las Heras S., 2015, “Design and qualification of a supersonic wind tunnel for boundary layer transition research”. Journal of Aerospace Engineering. Vol. 229 (3), pp 562-578. March. https://doi.org/10.1177/0954410014537612. ISSN: 0954-4100.

[⁵¹] De Maesschalck C., Lavagnoli S., Paniagua G., 2015, “Blade tip carving effects on the aero-thermal performance of a transonic turbine”. Journal of Turbomachinery. Vol. 137, Issue 2, 021005, pp 1-10. February. https://doi.org/10.1115/1.4028326. ISSN: 0889-504X. 

[⁵⁰] Puente R., Paniagua G., Verstraete T., 2015, “Design trade-off study between efficiency and rotor forcing attenuation in a transonic turbine stage”. Applied Mathematical Modelling. Vol. 39, Issue 2, pp 838-850. January. https://doi.org/10.1016/j.apm.2014.07.003. ISSN: 0307-904X. 

[⁴⁹] Paniagua G., Iorio M.C., Vinha N., Sousa J., 2014, “Design and analysis of pioneering high supersonic axial turbines”. International Journal of Mechanical Sciences. Vol. 89, pp 65-77. September. https://doi.org/10.1016/j.ijmecsci.2014.08.014. ISSN: 0020-7403.

[⁴⁸] Tomasoni F., Saracoglu B., Paniagua G., 2014, “A decision-making algorithm for automatic flow pattern identification in high-speed imaging”. Expert Systems with Applications. Vol. 41, Issue 8, pp 3935-3943. June. http://doi.org/10.1016/j.eswa.2013.12.015. ISSN: 0957-4174.

[⁴⁷] Fernandez Villace V., Paniagua G., Steelant J., 2014, “Installed performance evaluation of an air turbo-rocket expander engine”. Aerospace science and technology. Vol. 35, pp 63-79. May. http://doi.org/10.1016/j.ast.2014.03.005. ISSN: 1270-9638. 

[⁴⁶] Joly M., Verstraete T., Paniagua G., 2014, “Integrated multifidelity, multidisciplinary evolutionary design optimization of counterrotating compressors”. Integrated computer aided engineering. Vol. 21, Number 3, pp. 249-261. April. http://doi.org/10.3233/ICA-140463. ISSN: 1069-2509.

[⁴⁵] De Maesschalck C., Lavagnoli S., Paniagua G., Vinha N., 2014, “Aerothermodynamics of tight rotor tip clearance flows in high-speed unshrouded turbines”. Applied Thermal Engineering. Vol. 65, Issues 1-2, pp 343-351. April. http://doi.org/10.1016/j.applthermaleng.2014.01.015. ISSN: 1359-4311.

[⁴⁴] De Maesschalck C., Lavagnoli S., Paniagua G., 2014, “Blade Tip Shape Optimization for Enhanced Turbine Aerothermal Performance”. Journal of Turbomachinery. Vol. 136, Issue 4, 041016, pp 1-11. April. http://doi.org/10.1115/1.4025202. ISSN: 0889-504X (2^nd Place EREA Best paper award on evolutionary research in 2013).

[⁴³] Sousa J., Villafañe L., Paniagua G., 2014, “Thermal analysis and modeling of surface heat exchangers operating in the transonic regime”. Energy. Vol. 64, pp 961-969. January. http://doi.org/10.1016/j.energy.2013.11.032. ISSN: 0360-5442.

[⁴²] Saracoglu B.H., Paniagua G., Sanchez J., Rambaud P., 2013, “Effects of blunt trailing edge flow discharge in supersonic regime”. Computers and Fluids. Vol. 88, pp 200-209. December. http://doi.org/10.1016/j.compfluid.2013.09.013. ISSN: 0045-7930.

[⁴¹] Rodriguez Miranda I., Fernandez Villace V., Paniagua G., 2013, “Modeling, Analysis and Optimization of the Air Turbo Rocket Expander Engine”. Journal of Propulsion and Power. Vol. 29, Issue 6, pp 1266-1273. November. http://doi.org/10.2514/1.B34781. ISSN: 0748-4658.

[⁴⁰] Joly M., Verstraete T., Paniagua G., 2013, “Multidisciplinary design optimization of a compact highly-loaded fan”. Structural and Multidisciplinary Optimization. Vol. 49, pp 471-483. August. http://doi.org/10.1007/s00158-013-0987-5. ISSN: 1615-147X.

[³⁹] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B.H., 2013, “Pulsating Coolant Ejection Effects Downstream of a Supersonic Trailing Edge”. Engineering Applications of Computational Fluid Mechanics. Vol. 7, No. 2, pp 250-260. June. http://dx.doi.org/10.1080/19942060.2013.11015468. ISSN: 1994-2060.

[³⁸] Paniagua G., Lavagnoli S., Verstraete T., Mahmoudi W., Benamara T., 2013, “Aerodesign of a Transonic Contra-rotating turbine to drive the LOX and LH2 turbopumps in an expander cycle”. International Journal of Numerical Methods for Heat and Fluid Flow. Vol. 23, Issue 4. pp 575 – 587. May. http://doi.org/10.1108/09615531311323746. ISSN: 0961-5539.

[³⁷] Lavagnoli S., Paniagua G., De Maesschalck C., Yasa T., 2013, “Analysis of the Unsteady Overtip Casing Heat Transfer in a High Speed Turbine”. Journal of Turbomachinery. Vol. 135, Issue 3, 031027, pp 1-12. May. http://doi.org/10.1115/1.4007509. ISSN: 0889-504X.

[³⁶] Joly M., Verstraete T., Paniagua G., 2013, “Differential evolution based soft optimization to attenuate vane-rotor shock interaction in high-pressure turbines”. Applied Soft Computing. Vol. 13, Issue 4, pp 1882-1891. April. http://doi.org/10.1016/j.asoc.2012.12.005. ISSN: 1568-4946.

[³⁵] Fernandez Villace V., Paniagua G., 2013, “On the exergetic effectiveness of combined-cycle engines for high speed propulsion”. Energy. Vol. 51, pp 382-394. March https://doi.org/10.1016/j.energy.2012.11.051. ISSN: 0360-5442.

[³⁴] Villafañe L., Paniagua G., 2013, “Aero-thermal Analysis of Shielded Fine Wire Thermocouples”. International Journal of Thermal Sciences. Vol. 65, pp 214 – 223. March. https://doi.org/10.1016/j.ijthermalsci.2012.10.025. ISSN: 1290-0729.

[³³] Fernandez Villace V., Paniagua G., 2013, “Numerical model of a Variable-Combined-Cycle Engine for Dual Subsonic and Supersonic Cruise”. Energies. Vol. 6, Issue 2, pp 839-870. February. https://doi.org/10.3390/en6020839. ISSN: 1996-1073. 

[³²] Sousa J., Lavagnoli S., Paniagua G., Villafañe L., 2012, “Three Dimensional Inverse Heat Flux Evaluation Based on Infrared Thermography”. Quantitative InfraRed Thermography Journal. Vol. 9, Issue 2, pp 177-191. December. https://doi.org/10.1080/17686733.2012.743697. ISSN: 1768-6733.

[³¹] Saracoglu B.H., Paniagua G., Salvadori S., Tomasoni F., Duni S., Yasa T., Miranda A., 2012, “Trailing edge shock modulation by pulsating coolant ejection”. Applied Thermal Engineering. Vol. 48, pp 1-10. December. http://doi.org/10.1016/j.applthermaleng.2012.04.036. ISSN: 1359-4311. 2^nd Place EREA Best paper award on evolutionary research in 2012.

[³⁰] Pinilla V., Solano J.P., Paniagua G., Anthony R., 2012, “Adiabatic wall temperature evaluation in a high speed turbine”. Journal of Heat Transfer. Vol. 134, Issue 9, 091601, pp 1-9. September. http://doi.org/10.1115/1.4006313. ISSN: 0022-1481.

[²⁹] Yasa T., Paniagua G., 2012, “Robust Procedure For Multi-Hole Probe Data Processing”. Flow Measurement and Instrumentation. Vol. 26, pp 46-54. August. http://doi.org/10.1016/j.flowmeasinst.2012.03.004. ISSN: 0955-5986.

[²⁸] Povey T., Paniagua G, 2012, “Method to Improve Precision of Rotating Inertia and Friction Measurements”. Journal Mechanical Systems and Signal Processing. Vol. 30, pp 323-329. July. http://doi.org/10.1016/j.ymssp.2012.01.025. ISSN: 0888-3270.

[²⁷] Schreivogel P., Paniagua G., Bottini H., 2012, “Pressure sensitive paint techniques for surface pressure measurements in supersonic flows”. Experimental Thermal and Fluid Science. Vol. 39, pp 189-197. May. http://doi.org/10.1016/j.expthermflusci.2012.01.023. ISSN: 0894-1777. 

[²⁶] Lavagnoli S., Paniagua G., Tulkens M., Steiner A., 2012, “High Fidelity Rotor Gap Measurements in a Short-Duration Turbine Rig”. Journal Mechanical Systems and Signal Processing. Vol. 27, pp 590-603. February. http://doi.org/10.1016/j.ymssp.2011.09.008. ISSN: 0888-3270.

[²⁵] Lavagnoli S., Yasa T., Paniagua G., Castillon L., Duni S., 2012, “Aerodynamic Analysis of an Innovative Low Pressure Vane Placed in an s-Shape Duct”. Journal of Turbomachinery. Vol. 134, Issue 1, 011013, pp 1-13. January. http://doi.org/10.1115/1.4003241. ISSN: 0889-504X.

[²⁴] Yasa T., Lavagnoli S., Paniagua G., 2011, “Impact of a Multi-Splitter Vane Configuration on the Losses in a 1.5 Turbine Stage”. Journal of Power and Energy. Part A. Vol. 225, Issue 7, pp 964-974. November. http://doi.org/10.1177/0957650911409843. ISSN: 0957-6509.

[²³] Solano J.P., Pinilla V., Paniagua G., Lavagnoli S., Yasa T., 2011, “Aero-thermal investigation of a multi-splitter axial turbine”. International Journal of Heat and Fluid Flow. Vol. 32, Issue 5, pp 1036-1046. October. http://doi.org/10.1016/j.ijheatfluidflow.2011.05.011. ISSN: 0142-727X. 2^nd Place EREA Best paper award on evolutionary research in 2011.

[²²] Villafañe L., Paniagua G., Kaya M., Bajusz D., Hiernaux S., 2011, “Development of a transonic wind tunnel to investigate engine bypass flow heat exchangers”. Journal of Aerospace Engineering. Vol. 225, Issue 8, pp 902-914. August. http://doi.org/10.1177/0954410011400127. ISSN: 0954-4100.

[²¹] Delhaye D., Paniagua G., Fernandez Oro J., Dénos R., 2011, “Enhanced performance of fast-response 3-hole wedge probes for transonic flows in axial turbomachinery”. Experiments in Fluids. Vol. 50, No. 1, pp 163-177. January. http://doi.org/10.1007/s00348-010-0908-y. ISSN: 0723-4864. 2^nd Place EREA Best paper award on evolutionary research in 2010.

[²⁰] Pau M., Paniagua G., 2010, “Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane with Rim Seal Cavity Flow Ejection”. Journal of Fluids Engineering. Vol. 132, Issue 11, 111101, pp 1-9. November. http://doi.org/10.1115/1.4002887. ISSN: 0098-2202.

[¹⁹] Pau M., Paniagua G., Delhaye D., de la Loma A., Ginibre P., 2010, “Aerothermal impact of stator-rim purge flow and rotor-platform film cooling on a transonic turbine stage”. Journal of Turbomachinery. Vol. 132, No. 2, 021006, pp 1-12. April. http://doi.org/10.1115/1.3142859. ISSN: 0889-504X.

[¹⁸] Solano J.P., Paniagua G., 2009, “Novel Two-Dimensional Transient Heat Conduction Calculation in a Cooled Rotor: Ventilation Preheating – Blow-Down Flux”. Journal of Heat Transfer. Vol. 131, No. 8, 081601, pp 1-9. August. https://doi.org/10.1115/1.3122777. ISSN: 0022-1481. Best Paper Award in Heat Transfer at the ASME Turbo Expo.

[¹⁷] Varvill R., Paniagua G., Kato H., Thatcher M., 2009, “Design and Testing of the Contra-Rotating Turbine for the Scimitar Precooled Mach 5 Cruise Engine”. Journal of the British Interplanetary Society. Vol. 62, Issue 6, pp 225-234. June. ISSN: 0007-084X.

[¹⁶] Paniagua G., Szokol S., Kato H., Manzini G., Varvill R., 2008, “Contra-rotating turbine aero-design for an advanced hypersonic propulsion system”. Journal of Propulsion and Power. Vol. 24, No. 6, pp 1269-1277. November – December. https://doi.org/10.2514/1.35612. ISSN: 0748-4658. 

[¹⁵] Van den Braembussche R., Brouckaert J.F., Paniagua G., Briottet L, 2008, “Design and optimization of a multistage turbine for a helium cooled reactor”. Journal of Nuclear Engineering and Design, Special Issue on HTR 2006. Vol. 238, No. 11, pp 3136-3144. November. https://doi.org/10.1016/j.nucengdes.2008.01.024 . ISSN: 0029-5493.

[¹⁴] Paniagua G., Yasa T., de la Loma A., Castillon L., Coton T., 2008, “Unsteady strong shocks interactions in a transonic turbine: Experimental and numerical analysis”. Journal of Propulsion and Power. Vol. 24, No. 4, pp 722-731. July - August. https://doi.org/10.2514/1.34774. ISSN: 0748-4658.

[¹³] De la Loma A., Paniagua G., Verrastro D., Adami P., 2008, “Transonic turbine stage heat transfer investigation in presence of strong shocks”. Journal of Turbomachinery. Vol. 130, No. 3, 031019, pp 1-8. July. https://doi.org/10.1115/1.2777193 . ISSN: 0889-504X.

[¹²] Billiard N., Paniagua G., Dénos R., 2008, “Impact of clocking on the aero-thermodynamics of a second stator tested in a one and a half stage HP turbine”. Journal of Thermal Science. Vol. 17, No. 2, pp 97-110. April-June. https://doi.org/10.1007/s11630-008-0097-7 . ISSN: 1003-2169.

[¹¹] Pau, M., De La Loma, A., Paniagua, G. and Delhaye, D., 2008, “Film Cooling and Hub Disk Leakage Flow Experiments in a Fully Rotating HP Turbine Stage”. WSEAS Transactions on Fluid Mechanics. Volume 3, Issue 1, pp 56-67. January. http://www.wseas.us/e-library/transactions/fluid/2008/25-586N.pdf. ISSN: 1790-5087.

[¹⁰] Paniagua G., and Yasa T., 2007, “Accurate turbine inertia measurement”. Journal Experimental Mechanics. Vol. 47, No. 5, pp 693-700. October. https://doi.org/10.1007/s11340-006-9031-7. ISSN: 0014-4851.

[⁹] Yasa T., Paniagua G., Bussolin A., 2007, “Performance analysis of a transonic high pressure turbine”. Journal of Power and Energy. Part A. Vol. 221, No. 6, pp 769-778. September. https://doi.org/10.1243/09576509JPE467. ISSN: 0957-6509. 

[⁸] Paniagua G., Persico G., Billiard N., Dénos R., 2007, “Modulation of the rotor-stator interactions due to clocking”. International Review of Mechanical Engineering. Vol. 1, No. 3, pp 293-303. May. ISSN: 1970-8734.

[⁷] Yasa T., Paniagua G., Dénos R., 2007, “Application of hot-wire anemometry in a blow-down turbine facility”. Journal of Engineering for Gas Turbines and Power. Vol. 129, No. 2, pp 420-427. April. https://doi.org/10.1115/1.2364191. ISSN: 0742-4795.

[⁶] Dénos R. and Paniagua G., 2005, “Effect of vane-rotor interaction on the unsteady flowfield downstream of a transonic HP turbine”. Journal of Power and Energy. Part A. Vol. 219, No. 6, pp 431-442. September. https://doi.org/10.1243/095765005X31180. ISSN: 0957-6509.

[⁵] Paniagua G., Dénos R., Almeida S., 2004, “Effect of hub endwall cavity flow ejection on the flowfield of a transonic high pressure turbine”. Journal of Turbomachinery. Vol. 126, No. 4, pp 578-586. October. https://doi.org/10.1115/1.1791644. ISSN: 0889-504X.

[⁴] Paniagua G., Dénos R., 2002, “Digital compensation of pressure sensors in the time domain”. Experiments in Fluids. Vol. 32, No. 4, pp 417-424. April. https://doi.org/10.1007/s003480100355. ISSN: 0723-4864.

[³] Paniagua G., Dénos R., Arts T., 2001, “Steady-unsteady measurements of the flow field downstream of a transonic HP turbine stage”. Journal of Power and Energy. Vol. 215, No. A6, pp 663-673. September. https://doi.org/10.1243/0957650011538974 . ISSN: 0957-6509.

[²] Dénos R., Arts T., Paniagua G., Michelassi V., Martelli F., 2001, “Investigation of the unsteady rotor aerodynamics in a transonic turbine stage”. Journal of Turbomachinery. Vol. 123, No. 1, pp 81-89. January. https://doi.org/10.1115/1.1314607 . ISSN: 0889-504X.

[¹] Dénos R., Sieverding C.H., Arts T., Brouckaert J.F., Paniagua G., Michelassi V., 1999, “Experimental investigation of the unsteady rotor aerodynamics of a transonic turbine stage”. Journal of Power and Energy. Vol. 213, No. A4, pp 327-338. June. https://doi.org/10.1243/0957650991537653

Fully Reviewed Conference Papers

[⁹¹] Bhatnagar L., Paniagua G., Clemens E., Bloxham M., 2023, “A Probabilistic Approach to Turbine Efficiency”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103860. Boston, USA. June.

[⁹⁰] Grasa S., Paniagua G., 2023, “Design, multi-point optimization and analysis of diffusive stator vanes to enable turbine integration into rotating detonation engines”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101726. Boston, USA. June.

[⁸⁹] Moore J.J., Neveu J., Bensmiller J., Replogle C., Fetvedt J., Cormier I., Kapat J., Fernandez E., Paniagua G., 2023, “Development of a 300 Mwe Utility Scale Oxy-Fuel Sco2 Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103328. Boston, USA. June.

[⁸⁸] Nares Alcala R., Bhatnagar L., Paniagua G., 2023, “Development of a Conduction-Free Total Temperature Probe Based on the Two-Wire Concept”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-102360. Boston, USA. June.

[⁸⁷] Clark J., Cukurel B., Paniagua G., 2023, “On the Development of High Lift, High Work Low-Pressure Turbines”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103164. Boston, USA. June.

[⁸⁶] Tuite L., Braun J., Paniagua G., 2023, “Optimization of an HPT Blade and Sector-Based Annular Rig Design for Supercritical Co2 Power Cycle Representative Testing”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101722. Boston, USA. June.

[⁸⁵] McKelvy A., Braun J., Paniagua G., Andre T., Choquet E., Falempin F., 2023, “Quantitative Definition of Spray Edge With Extinction Diagnostics for Liquid Jets in Supersonic Crossflow”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-102536. Boston, USA. June.

[⁸⁴] Castillo A., Paniagua G., 2023, “Robust Tip Gap Measurements: A Universal In-Situ Dynamic Calibration, Demonstration in a Two-Stage High Speed Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101223. Boston, USA. June.

[⁸³] Saavedra J., Lozano F., Paniagua G., 2023, “Transient Heat Flux Budgeting on a High-Pressure Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101446. Boston, USA. June

[⁸²] Grasa S., Paniagua G., 2023, “Optimization of intense diffusive turbine nozzle guide vanes suitable for transonic outlet Rotating Detonation Combustors”. Proceedings of the 15^th European Conference on Turbomachinery. Budapest, Hungary. March.

[⁸¹] Tuite L., Straub D., Paniagua G., 2023, “Development of a large-scale open geometry for squaler tip coolant injection research”. Proceedings of the 15^th European Conference on Turbomachinery. Budapest, Hungary. March.

[⁸⁰] Kasahara J., Nakata K., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2022, “Experimental investigation of inner flow of a throat less diverging rotating detonation engine”. 39^th International Symposium on Combustion. Paper PROCI-D-22-00174. Vancouver, Canada.

[⁷⁹] Nowak H., Lluesma-Rodriguez F., Rahbari I., Clark J., Paniagua G., 2022, “Response of separated boundary layers to steady and pulsated flow injection in transonic internal flows”. Proceedings of the ASME Turbo Expo 2021. Paper GT2022-82344. Rotterdam, The Netherlands. June.

[⁷⁸] Rahbari I., Butzen M., Twaddle J., Paniagua G., 2022, “Development of a test article for acoustic streaming in high-speed flow”. Proceedings of the ASME Turbo Expo 2021. Paper GT2022-82344. Rotterdam, The Netherlands. June.

[⁷⁷] Braun J., Paniagua G., Ferguson D., 2021, “Rotating Detonation Combustor Downstream transition Passage Design Considerations”. Proceedings of the Active Flow Control Conference. Berlin, Germany. September.

[⁷⁶] Obenauf D., Braun J., Meyer T.R., Paniagua G., Sojka P.E., Falempin F., 2021, “Characterization of the steady and unsteady spray structures of a liquid jet in supersonic crossflow”. Proceedings of the 15^th Triennial International Conference on Liquid Atomization and Spray Systems. ICLASS 2021. Edinburgh, UK, August.

[⁷⁵] Braun J., Paniagua G., Ferguson D., 2021, “Aero-thermal characterization of accelerating and diffusing passages downstream of rotating detonation combustors”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59111. Pittsburgh, USA. June.

[⁷⁴] Bhatnagar L., Paniagua G., Gonzalez-Cuadrado D., Aye-Addo P.A.N., Castillo A., Lozano F., Bloxham M., 2021, “Uncertainty in high-pressure stator performance measurement in an annular cascade at engine-representative Reynolds and Mach”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59702. Pittsburgh, USA. June.

[⁷³] Aye-Addo P.A.N., Paniagua G., Gonzalez-Cuadrado D., Bhatnagar L., Castillo A., Braun J., Gomez-Gomez M., Meyer T., Bloxham M., 2021, “Development of a lifetime pressure sensitive paint procedure for high-pressure vane testing”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59886. Pittsburgh, USA. June.

[⁷²] Yokoo R., Goto K., Kasahara J., Athmanathan V., Braun J., Paniagua G., Meyer T., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., 2021, “Experimental study of internal flow structures in cylindrical rotating detonation engines”. Proceedings of the 38^th International Symposium on Combustion. PROCI-D-19-00206. Adelaide, Australia. January

[⁷¹] Braun J., Paniagua G., Falempin F., 2020, “Aero-thermal Optimization of Bladeless Turbines”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-3655. London, UK. September.

[⁷⁰] Saavedra J., Athmanathan V., Paniagua G., Meyer T., Straub D., Black J., Ramesh S., 2020, “Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green´s Functions”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-16037. London, UK. September.

[⁶⁹] Inman D., Gonzalez Cuadrado D., Andreoli V., Fisher J., Paniagua G., Aye-Addo A. N., Bhatnagar L., Lozano F., Meyer T., Bloxham M., 2020, “Particle Image Velocimetry in a High-Pressure Turbine State at Aerodynamically Engine Representative Conditions”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-15013. London, UK. September.

[⁶⁸] Juangphanich P., Paniagua G., Shyam V., 2020, “Bio-inspired High-Pressure Turbine Optimization Strategy for Future Hybrid Electric Engines Operating at Off-design”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-15368. London, UK. September.

[⁶⁷] De Maesschalck C., Andreoli V., Paniagua G., Gillen T., Barker B., 2019, “Aerothermal optimization of turbine squealer tip geometries with arbitrary cooling injection”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91280. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91208.

[⁶⁶] Liu Z., Inhestern L.B., L.B., Braun J., Paniagua G., 2019, “Unsteady heat transfer assessment of supersonic turbines downstream of a rotating detonation combustor”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91460. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91460.

[⁶⁵] Inhestern L.B., Braun J., Paniagua G., Serrano J.R., 2019, “Design, optimization and analysis of supersonic radial turbines”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91756. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91756.

[⁶⁴] Gonzalez Cuadrado D., Lozano F., Paniagua G., 2019, “Experimental demonstration of inverse heat transfer methodologies for turbine applications”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91105. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91105

[⁶³] Saavedra J., Paniagua G., 2019, “Transient performance of separated flows: Experimental characterization of flow detachment dynamics”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91020. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91020.

[⁶²] Braun J., Paniagua G., Falempin F., Le Naour B., 2019, “Design and experimental assessment of bladeless turbines for axial inlet supersonic flows”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91047. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91047.

[⁶¹] Bhatnagar L., Paniagua G., 2019, “Development of high speed and high temperature atomic layer thermopiles”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91012. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91012.

[⁶⁰] Agarwal T., Rahbari I., Saavedra J., Paniagua G., Cukurel B., 2019, “Multi-fidelity analysis of acoustic streaming in forced convection heat transfer”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91548. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91548.

[⁵⁹] Krane P., Gonzalez Cuadrado D., Lozano F., Marconnet A, Paniagua G., 2019, “Identifying Hot Spots in Electronics Packages with a Sensitivity-Coefficient Based Inverse Heat Conduction Method”. Proceedings of the 18^th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems ITherm. https://doi.org/10.1109/ITHERM.2019.8757292. Las Vegas, USA. May.

[⁵⁸] Juangphanich P., Paniagua G., 2018, “Meander-like shape optimization of the stator rotor platform cavity”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-77167, pp. V05CT22A009; 12 pages. https://doi.org/10.1115/GT2018-77167. Oslo, Norway. June.

[⁵⁷] Gonzalez Cuadrado D., Lozano F., Andreoli V., Paniagua G., 2018, “Engine scalable rotor casing convective heat flux evaluation using inverse heat transfer methods”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76906, pp. V006T05A028; 12 pages. https://doi.org/10.1115/GT2018-76906. Oslo, Norway. June.

[⁵⁶] Saavedra J., Paniagua G., Chazot O., 2018, “Thermal boundary layer response to periodic fluctuations”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76896. https://doi.org/10.1115/GT2018-76896. Oslo, Norway. June.

[⁵⁵] Liu Z., Braun J., Paniagua G., 2018, “Characterization of a supersonic turbine downstream of a rotating detonation combustor”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76798, pp. V003T06A021 1-14. https://doi.org/10.1115/GT2018-76798.Oslo, Norway. June.

[⁵⁴] Saavedra J., Paniagua G., 2018, “Transient performance of separated flows: Characterization and active flow control”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-75128. pp. V006T05A001 1-13. https://doi.org/10.1115/GT2018-75128. Oslo, Norway. June.

[⁵³] Andreoli V., Braun J., Paniagua G., De Maesschalck C., Bloxham M., Cummings W., Langford L., 2018, “Aerothermal optimization of fully cooled turbine blade tips”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-75099. pp. 1-12. https://doi.org/10.1115/GT2018-75099. Oslo, Norway. June.

[⁵²] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2017, “”. Proceedings of the ASME Interpack 2017. https://doi.org/10.1115/IPACK2017-74224. San Francisco, USA. September. Outstanding Paper Award at the ASME InterPack Conference.

[⁵¹] Sousa J., Paniagua G., Collado E., 2017, “Analysis of the aerodynamic losses in a supersonic turbine”. Proceedings of the ASME PowerEnergy 2017. Paper ICOPE2017-3624. https://doi.org/10.1115/POWER-ICOPE2017-3624. Charlotte, USA. June.

[⁵⁰] De Maesschalck C., Lavagnoli S., Paniagua G., 2017, “Integration of CFD to design experiments for enhanced spatial and temporal discretization”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64863. https://doi.org/10.1115/GT2017-64863. Charlotte, USA. June.

[⁴⁹] Andreoli V., Gonzalez Cuadrado D., Paniagua G., 2017, “Prediction of the Turbine Tip Convective Heat Flux Using Discrete Green Functions”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64080. https://doi.org/10.1115/GT2017-64080. Charlotte, USA. June.

[⁴⁸] Braun J., Lu S., Paniagua G., 2017, “Development of high frequency virtual thermocouples”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64669. https://doi.org/10.1115/GT2017-64669. Charlotte, USA. June.

[⁴⁷] Liu Z., Paniagua G., 2017, “Design of directional probes for high-frequency turbine measurements”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-65680. https://doi.org/10.1115/GT2017-64680. Charlotte, USA. June.

[⁴⁶] Saavedra J., Paniagua G., Saracoglu B., 2016, “Experimental characterization of the vane heat flux under pulsating trailing-edge blowing”. Proceedings of the ASME Turbo Expo 2016. Paper GT2016-58100. https://doi.org/10.1115/GT2016-58100. ISBN: 978-0-7918-4982-8. Seoul, Korea. June.

[⁴⁵] Paniagua G., Gonzalez Cuadrado D., Saavedra J., Andreoli V., Meyer T., Meyer S., Lawrence D., 2016, “Experimental turbine facility for optical and surface aero-thermal measurements in turbines”. Proceedings of the ASME Turbo Expo 2016. Paper GT2016-58101. https://doi.org/10.1115/GT2016-58101. ISBN: 978-0-7918-4982-8. Seoul, Korea. June.

[⁴⁴] Gonzalez Cuadrado D., Lavagnoli S., Paniagua G., 2015, “Methodology to correct the magnetic field effect on thin film measurements”. Proceedings of the ASME Turbo Expo 2015. Paper GT2015-42715. https://doi.org/10.1115/GT2015-42715. Montreal, Canada. June.

[⁴³] De Maesschalck C., Lavagnoli S., Paniagua G., Verstraete T., Olive R., Picot P., 2015, “Heterogeneous Optimization Strategies for Carved and Squealer-like Turbine Blade Tips”. Proceedings of the ASME Turbo Expo 2015. Paper GT2015- 42983. https://doi.org/10.1115/GT2015-42983. Montreal, Canada. June. Nominated by the Heat Transfer Committee to Best Paper Award.

[⁴²] Bottini H., Saracoglu B., Paniagua G., 2014, “Experimental investigation of single roughness element effects on supersonic boundary layer transition”. Proceedings of the ASME FEDSM2014. Paper FEDSM2014-21673. https://doi.org/10.1115/FEDSM2014-21673. ISBN: 978-0-7918-4623-0. Chicago, USA. July.

[⁴¹] Villafañe L., Paniagua G., 2014, “Experimental Investigation of Engine Bypass Flow Behavior in the Presence of Surface Heat Exchangers”. Proceedings of the ASME FEDSM2014. Paper FEDSM2014-21580. https://doi.org/10.1115/FEDSM2014-21580. ISBN: 978-0-7918-4622-3. Chicago, USA. July.

[⁴⁰] Vinha N., Paniagua G., Sousa J., Saracoglu B., 2014, “Axial bladeless turbine suitable for high supersonic flows”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-27194. https://doi.org/10.1115/GT2014-27194. ISBN: 978-0-7918-4562-2. Dusseldorf, Germany. June.

[³⁹] Saracoglu B., Paniagua G., Salvadori S., 2014, “Energy balance of pulsating coolant ejection”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-25868. https://doi.org/10.1115/GT2014-25868. ISBN: 978-0-7918-4563-9. Dusseldorf, Germany. June.

[³⁸] Lavagnoli S., De Maesschalck C., Paniagua G., 2014, “Analysis of the Heat Transfer Driving Parameters in Tight Rotor Blade Tip Clearances”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-25291. https://doi.org/10.1115/GT2014-25291. ISBN: 978-0-7918-4572-1. Dusseldorf, Germany. June.

[³⁷] De Maesschalck C., Lavagnoli S., Paniagua G., 2013, “Blade tip carving effects on the aero-thermal performance of a transonic turbine”. Proceedings of the ASME Turbine Blade Tip Symposium & Course Week. Paper TBTS2013-2028. https://doi.org/10.1115/TBTS2013-2028. ISBN: 978-0-7918-5607-9. Hamburg, Germany. September.

[³⁶] Paniagua G., Sieverding C.H., Arts T., 2013, “A review of the von Karman institute compression tube facility for turbine research”. Proceedings of ASME Turbo Expo 2013. Paper GT2013- 95984. https://doi.org/10.1115/GT2013-95984. ISBN: 978-0-7918-5516-4. San Antonio, USA. June.

[³⁵] Sozio E., Verstraete T., Paniagua G., 2013, “Design-Optimization Approach to Multistage Axial Contra-Rotating Turbines”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94762. https://doi.org/10.1115/GT2013-94762. ISBN: 978-0-7918-5523-2. San Antonio, USA. June.

[³⁴] De Maesschalck C., Lavagnoli S., Paniagua G., 2013, “Blade Tip Shape Optimization for Enhanced Turbine Aerothermal Performance”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94754. https://doi.org/10.1115/GT2013-94754. ISBN: 978-0-7918-5516-4. San Antonio, USA. June. Nominated by the Heat Transfer Committee to Best Paper Award.

[³³] Joly T., Verstraete T., Paniagua G., 2013, “Full Design of a Highly Loaded Contra-Rotating Fan by Multi-Objective Optimization of Through-Flow and High-Fidelity Aero-Mechanical Performances”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94433. https://doi.org/10.1115/GT2013-94433. ISBN: 978-0-7918-5523-2. San Antonio, USA. June.

[³²] Joly M., Verstraete T., Paniagua G., 2012, “Full design of a highly loaded fan by multi-objective optimization of through-flow and high-fidelity aero-mechanical performances”. Proceedings of the ASME Turbo Expo 2012. Paper GT2012-69686. http://doi.org/10.1115/GT2012-69686. Copenhagen, Denmark. June.

[³¹] Lavagnoli S., Paniagua G., De Maesschalck C., Yasa T., 2012, “Analysis of the Unsteady Overtip Casing Heat Transfer in a High Speed Turbine”. Proceedings of the ASME Turbo Expo 2012. Paper GT2012-69492. http://doi/org/10.1115/GT2012-69492. ISBN: 978-0-7918-4470-0. Copenhagen, Denmark. June.

[³⁰] Yasa T., Paniagua G., 2011, “Robust Post-Processing Procedure for Multi-hole Pressure Probes”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011-46719. http://doi.org/10.1115/GT2011-46719. ISBN: 978-0-7918-4474-8. Vancouver, Canada. June.

[²⁹] Pinilla V., Solano J.P., Paniagua, 2011, “Method and measurement of adiabatic wall temperature downstream of a High-Pressure turbine using thin-film sensors”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011- 46556. http://doi.org/10.1115/GT2011-46556. ISBN: 978-0-7918-5465-5. Vancouver, Canada. June.

[²⁸] Puente R., Paniagua G., Verstraete T., 2011, “Aerodynamic Characterization of Transonic Turbine Vanes Optimized To Attenuate Rotor Forcing”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011-46553. http://doi.org/10.1115/GT2011-46553. ISBN: 978-0-7918-5467-9. Vancouver, Canada. June.

[²⁷] Bianchi S., Corsini A., Paniagua G., 2011, “Amplification of the forcing and tonal noise in transonic high-pressure turbines”. Proceedings of the 9^th European Conference on Turbomachinery. Istambul, Turkey. March.

[²⁶] Yasa T., Lavagnoli S., Paniagua G., 2011, “Impact of a Multi-Splitter Vane Configuration on the Losses in a 1.5 Turbine Stage”. Proceedings of the 9^th European Conference on Turbomachinery. Istambul, Turkey. March.

[²⁵] Yasa T., Paniagua G., Fridh J., Vogt D., 2010, “Performance of a nozzle guide vane in subsonic and transonic regimes tested in an annular sector”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22901. http://doi.org/10.1115/GT2010-22901. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[²⁴] Pinilla V., Solano J.P., Paniagua G., Lavagnoli S., Yasa T., 2010, “Experimental heat transfer investigation in a multisplitter low pressure vane architecture”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22694. http://doi.org/10.1115/GT2010-22694. ISBN: 978-0-7918-4399-4. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[²³] Lavagnoli S., Yasa T., Paniagua G., Duni S., Castillon L., 2010, “Aerodynamic Analysis of an Innovative Low Pressure Vane Placed in a S-Shape Duct”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22546. http://doi.org/10.1115/GT2010-22546. ISBN: 978-0-7918-4401-4. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[²²] Joly M., Paniagua G., Verstraete T., 2010, “Attenuation of vane distortion in a transonic turbine using optimization strategies. Part 2 - Optimization”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22371. http://doi.org/10.1115/GT2010-22371. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[²¹] Joly M., Verstraete T., Paniagua G., 2010, “Attenuation of vane distortion in a transonic turbine using optimization strategies. Part 1 - Methodology”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22370. http://doi.org/10.1115/GT2010-22370. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[²⁰] Pau M., Paniagua G., 2009, “Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane with Rim Seal Cavity Flow Ejection”. Proceedings of the ASME Turbo Expo 2009. Paper GT2009-60155. http://doi.org/10.1115/GT2009-60155. ISBN: 978-0-7918-4888-3. eISBN: 978-0-7918-3849-5. Orlando, USA. June. Nominated by the Turbomachinery Committee to Best Paper Award.

[¹⁹] Chana K.S., Povey T., Paniagua G., Schultz A., Martelli F., Smith A., Olive R., 2009, “Turbine Aero-Thermal External Flows II a European 6^th Framework Programme Addressing the High Pressure Turbine”. Proceedings of the 8^th European Conference on Turbomachinery. Graz, Austria. March.

[¹⁸] Solano J.P., Paniagua G., de la Loma A., 2008, “Novel 2D transient heat conduction calculation in a cooled rotor: Ventilation preheating – Blowdown flux”. Proceedings of the ASME Turbo Expo 2008. Paper GT2008-51308. http://doi.org/10.1115/GT2008-51308. ISBN: 978-0-7918-4314-7. eISBN: 0-7918-3824-2. Berlin, Germany. June. Best paper award from the Heat Transfer Committee.

[¹⁷] Pau M., Paniagua G., Delhaye D., de la Loma A., Ginibre P., 2008, “Aerothermal impact of stator-rim purge flow and rotor-platform film cooling on a transonic turbine stage”. Proceedings of the ASME Turbo Expo 2008. Paper GT2008-51295. http://doi.org/10.1115/GT2008-51295. ISBN: 978-0-7918-4316-1. eISBN: 0-7918-3824-2. Berlin, Germany. June.

[¹⁶] De la Loma A., Paniagua G., Verrastro D., Adami P., 2007, “Transonic Turbine Stage Heat Transfer Investigation in Presence of Strong Shocks”. Proceedings of the ASME Turbo Expo 2007. Paper GT2007-27101. http://doi.org/10.1115/GT2007-27101. ISBN: 0-7918-4795-0. eISBN: 0-7918-3796-3. Montreal, Canada. May.

[¹⁵] Billiard N., Jerez Fidalgo V., Dénos R., Paniagua G., 2007, “Analysis of Stator-Stator Clocking in a Transonic Turbine”. Proceedings of the ASME Turbo Expo 2007. Paper GT2007-27323. http://doi.org/10.1115/GT2007-27323. ISBN: 0-7918-4795-0 | eISBN: 0-7918-3796-3Montreal, Canada. May.

[¹⁴] Paniagua G., Persico G., Billiard N., Dénos R., 2007, “Modulation of the rotor-stator interactions due to clocking”. Proceedings of the 7^th European Conference on Turbomachinery. Athens, Greece. March.

[¹³] Yasa T., Paniagua G., Bussolin A., 2007, “Performance Analysis of a Transonic High Pressure Turbine”. Proceedings of the 7^th European Conference on Turbomachinery. Athens, Greece. March.

[¹²] Dénos R., Paniagua G., Yasa T., Fortugno E., 2006, “Determination of the Efficiency of a Cooled HP Turbine in a Blow-Down Facility”. Proceedings of the ASME Turbo Expo 2006. Paper GT2006-90460. http://doi.org/10.1115/GT2006-90460. ISBN: 0-7918-4241-X. eISBN: 0-7918-3774-2. Barcelona, Spain. May.

[¹¹] Yasa T., Paniagua G., Dénos R., 2006, “Application of Hot-Wire Anemometry in a Blow-Down Turbine Facility”. Proceedings of the ASME Turbo Expo 2006. Paper GT2006-90457. http://doi.org/10.1115/GT2006-90457. ISBN: 0-7918-4237-1. eISBN: 0-7918-3774-2. Barcelona, Spain. May. Nominated by the Controls, Diagnostics & Instrumentation Committee to Best Paper Award.

[¹⁰] Billiard N., Paniagua G., Dénos R., 2005, “Effect of Clocking on the Heat Transfer Distribution of a Second Stator tested in a One and a Half Stage HP Turbine”. Proceedings of the ASME Turbo Expo 2005. Paper GT2005-68462. https://doi.org/10.1115/GT2005-68462. ISBN: 0-7918-4730-6. eISBN: 0-7918-3754-8Reno, USA. June.

[⁹] Dénos R. and Paniagua G., 2005, “Effect of Vane-Rotor Interaction on the Unsteady Flowfield downstream of a Transonic HP Turbine”. Proceedings of the 6^th European Conference on Turbomachinery. Lille, France. April.

[⁸] Paniagua G., Dénos R., Almeida S., 2004, “Effect of hub endwall cavity flow ejection on the flowfield of a transonic high pressure turbine”. Proceedings of the ASME Turbo Expo 2004. Paper GT2004-53458. http://doi.org/10.1115/GT2004-53458. ISBN: 0-7918-4170-7. eISBN: 0-7918-3739-4. Vienna, Austria. June.

[⁷] Gadea J., Dénos R., Paniagua G., Billiard N., Sieverding C.H., 2004, “Effect of Clocking on the Second Stator Pressure Field of a one and a half stage Transonic Turbine”. Proceedings of the ASME Turbo Expo 2004. Paper GT2004-53463. https://doi.org/10.1115/GT2004-53463. ISBN: 0-7918-4170-7. eISBN: 0-7918-3739-4. Vienna, Austria. June.

[⁶] Paniagua G., Dénos R., Oropesa M., 2002, “Thermocouple probes for accurate temperature measurements in short duration facilities”. Proceedings of the ASME Turbo Expo 2002. Paper GT2002-30043. https://doi.org/10.1115/GT2002-30043. ISBN: 0-7918-3607-X. eISBN: 0-7918-3601-0. Amsterdam, Holland. June.

[⁵] Dénos R. and Paniagua G., 2002, “Influence of the Hub Endwall Cavity flow on the Time-averaged and Time-resolved Aerothermodynamics of an Axial HP Turbine Stage”. Proceedings of the ASME Turbo Expo 2002. Paper GT2002-30185. https://doi.org/10.1115/GT2002-30185. ISBN: 0-7918-3608-8. eISBN: 0-7918-3601-0. Amsterdam, Holland. June.

[⁴] Michelassi V., Giangiacomo P., Martelli F., Dénos R., Paniagua G., 2001, “Steady Three-Dimensional Simulation of Transonic Axial Turbine Stage”. Proceedings of ASME Turbo Expo 2001. Paper 2001-GT-0174. https://doi.org/10.1115/2001-GT-0174. ISBN: 978-0-7918-7852-1. New Orleans, USA. June.

[³] Paniagua G., Dénos R., Arts T., 2001, “Steady-Unsteady Measurements of the Flowfield downstream of a Transonic HP Turbine Stage”. Proceedings of the 4^th European Conference on Turbomachinery. Firenze, Italy. March. ISBN: 88-86281-57-9.

[²] Dénos R., Arts T., Paniagua G., Michelassi V., Martelli F., 2000, “Investigation of the unsteady rotor aerodynamics in a transonic turbine stage”. Proceedings of ASME Turbo Expo 2000. Paper 2000-GT-0435. http://doi.org/10.1115/2000-GT-0435. ISBN: 978-0-7918-7854-5. Munich, Germany. May.

[¹] Dénos R., Sieverding C.H., Arts T., Brouckaert J.F., Paniagua G., Michelassi. V., 1999, “Experimental Investigation of the Unsteady Rotor Aerodynamics of a Transonic Turbine Stage”. Proceedings of the 3^rd European Conference on Turbomachinery. London, UK. March. ISBN: 1 86058 196 X. ISSN: 1356-1448.

Conference Proceedings

[⁹⁷] Martinez Cava A., Valero E., De Vicente J., Paniagua G., 2019, “Coanda flow characterization on base bleed configurations using global stability analysis”. Proceedings of the 57^th AIAA Aerospace Sciences Meeting. SciTech. https://doi.org/10.2514/6.2019-0881. San Diego, USA. January.

[⁹⁶] Braun J., Paniagua G., 2018, “Analysis of Advanced Turbine Integration with Rotating Detonation Combustors using a Time-Accurate Reduced-Order-Model”. Proceedings of the 11^th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. September.

[⁹⁵] Bhatnagar L., Braun J., Andreoli V., Gonzalez Cuadrado D., Liu Z., Paniagua G., 2018, “Developments in high frequency directional probes for high temperature applications”. Proceedings of the 24^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[⁹⁴] Aye-Addo P., Long N., Paniagua G., Saavedra J., 2018, “Development of laser lifetime pressure sensitive paint for unsteady measurements”. Proceedings of the 24^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[⁹³] Fisher J., Saavedra J., Paniagua G., Meyer T., Slipchenko M., 2018, “Development of high frequency particle image velocimetry to characterize speration regions downstream of a hump”. Proceedings of the 24^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[⁹²] Liu Z, Braun J., Paniagua G., 2018, “Three-Dimensional Optimization of a subsonic axial turbine designed for high inlet Mach number”. Proceedings of the 54^th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2018-4480. Cincinnati, USA. July.

[⁹¹] Padilla I., Saavedra J., Paniagua G., Pinna F., 2018, “Analysis of the boundary layer
stability to assess flow separation control capability in low-pressure
turbines”. Proceedings of the 7^th European Conference on Computational Fluid Dynamics. Glasgow, UK. June.

[⁹⁰] Vyas U., Andreoli V., Paniagua G., 2018, “Effect of transonic inlet design on the performance of a mico-turbojet engine”. Proceedings of the 56^th AIAA Aerospace Sciences Meeting. SciTech. https://doi.org/10.2514/6.2018-1624. Grapevine, USA. January.

[⁸⁹] Saavedra J., Paniagua G., 2017, “Flow Conditioning of Subsonic and Supersonic Blowdown wind tunnels”. Proceedings of the 23^nd International Symposium on Airbreathing Engines. Manchester, UK. September.

[⁸⁸] Gonzalez Cuadrado D., Andreoli V., Paniagua G., 2017, “Experimental Calibration of a High Speed Blowdown Tunnel”. Proceedings of the 23^nd International Symposium on Airbreathing Engines. Manchester, UK. September.

[⁸⁷] Liu Z, Braun J., Paniagua G., 2017, “Performance of axial turbines exposed to large fluctuations”. Proceedings of the 53^rd AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2017-4817. Atlanta, USA. July.

[⁸⁶] De Maesschalck C., Paniagua G. 2017, “Turbine Tip Flow Control through Upstream Purge Cooling Optimization” Proceedings of the 53^rd AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2017-4816. Atlanta, USA. July.

[⁸⁵] Saavedra J., Paniagua G., 2017, “Thermal boundary layer response to periodic fluctuations”. Computational Science and Engineering Student Conference. Purdue, USA. April.

[⁸⁴] Braun J., Paniagua G., Falempin F., Lanour B., 2017, “Bladeless turbines for unsteady high speed flows”. Proceedings of 21^st AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://doi.org/10.2514/6.2017-2422. Xiamen, China. March.

[⁸³] Braun J., Saavedra J., Paniagua G., 2017, “Evaluation of the unsteadiness across nozzles downstream of rotating detonation combustors”. Proceedings of the 55^th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2017-1063. AIAA SciTech. Grapevine, USA. January.

[⁸²] Juangphanich C., De Maesschalck C., Paniagua G., 2017, “From Conceptual 1D Design Towards Full 3D Optimization of a Highly Loaded Turbine Stage”. Proceedings of the 55^th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2017-0110. Grapevine, USA. January.

[⁸¹] Gibbs J., Bachmann A., Seyfang G., Peebles P., May C., Saracoglu B., Paniagua G., 2016, “An Open-Rotor Distributed Propulsion Aircraft Study”. Proceedings of the Deutscher Luft und Raumfahrtkongress 2016. Braunschweig, Germany. September.

[⁸⁰] Gonzalez Cuadrado D., Paniagua G., 2016, “Discrete green functions approach to predict convective heat transfer”. Proceedings of the 23^rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[⁷⁹] Liu Z., Paniagua G., 2016, “On the ability of conventional aerodynamic probes to resolve high frequency phenomena”. Proceedings of the 23^rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[⁷⁸] Braun J., Paniagua G., 2016, “Frequency enhancement of dual-junction thermocouple probes”. Proceedings of the 23^rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[⁷⁷] Raush G., Villafañe L., Paniagua G., 2016, “Optical Characterization of a Cross flow fan for Distributed Propulsion”. Proceedings of the 52^nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4960. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[⁷⁶] Braun J., Sousa J., Paniagua G., 2016, “Assessment of the Boundary Layer within a Rotating Detonation Combustor”. Proceedings of the 52^nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4557. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[⁷⁵] Thiry N., Paniagua G., 2016, “Characterization of the time-resolved starting process of supersonic diffusers”. Proceedings of the 52^nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4661. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[⁷⁴] Lavagnoli S., Andreoli V., De Maesschalck, Paniagua G., Gonzalez Cuadrado D., 2016, “Wind Tunnel Testing of Turbine Blade Tip Flows”. Proceedings of the 54^th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0910. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[⁷³] Saracoglu B. H., Paniagua G., 2016, “Compressor integration study for a pulse detonation engine”. Proceedings of the 54^th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0397. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[⁷²] Gorbachova Y., Valero E., Paniagua G., Martinez Cava A., Saracoglu B., 2016, “Study of the attainable flow topologies in a supersonic blunt trailing edge at various blowing ratios”. Proceedings of the 54^th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0909. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[⁷¹] Braun J., Saracoglu B., Magin T., Paniagua G., 2016, “Mono-dimensional analysis of the MagnetoHydrodynamic effect in Rotating Detonation Combustors”. Proceedings of the 54^th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0898. eISBN: 978-1-62410-393-3. San Diego, USA. January. Nominated by the gas turbine engine committee to Best Paper Award.

[⁷⁰] De Maesschalck C., Lacor C., Paniagua G., Lavagnoli S., Remiot A., Bricteux L., 2015, “Performance Robustness of Turbine Squealer Tip Designs due to Manufacturing and Engine Operation”. Proceedings of the 22^nd International Symposium on Airbreathing Engines. Phoenix, USA. October.

[⁶⁹] Sousa J., Paniagua G., 2015, “Fast design methodology for supersonic internal passages”. Proceedings of the 22^nd International Symposium on Airbreathing Engines. Phoenix, USA. October.

[⁶⁸] Sousa J., Paniagua G., 2015, “One-Dimensional Assessment of Supersonic Inlet Turbines”. Proceedings of the 51^st AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2015-3930. eISBN: 978-1-62410-321-6. Orlando, USA. July.

[⁶⁷] Kutlu B., Saracoglu B., Paniagua G., Kapat J., 2015, “Aeroacoustics of Flow over Rectangular Cavities”. Proceedings of the 51^st AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2015-3929. eISBN: 978-1-62410-321-6. Orlando, USA. July.

[⁶⁶] Irsch M.P., Davis R., Clark J., Paniagua G., 2015, “Flow Control of Unsteadiness in the Wake of a Turbine Blade”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-0824. eISBN: 978-1-62410-343-8. Kissimmee, USA. January.

[⁶⁵] Saracoglu B., Paniagua G., 2015, “Analysis of the flow flied around the wing section of a FanWing aircraft under various flow conditions”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-1936. eISBN: 978-1-62410-343-8. Kissimmee, USA. January.

[⁶⁴] Saavedra J., Lavagnoli S., Paniagua G., 2015, “Implications of boundary layer establishment on convective heat transfer experiments”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-0258. eISBN: 978-1-62410-343-8. Kissimmee, USA. January.

[⁶³] Gibbs J., Seyfang G., Peebles P., Villafañe L., Saracoglu B., Paniagua G., May C., Nagel B., Bachman A., 2014. “An analysis of FanWing Flight Physics and Potential Business Cases”. Proceedings of the 4^th EASN Association International Workshop on Flight Physics and Aircraft Design. Aachen, Germany. October.

[⁶²] Lavagnoli S., De Maesschalck, Paniagua G., 2014, “Uncertainty Analysis of Adiabatic Wall Temperature in Turbine Experiments”. Proceedings of the 22^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Lyon, France. September.

[⁶¹] Saracoglu B.H., Paniagua G., Minguez N., 2014, “Radial compressor with unsteady outlet blockage induced by detonation combustion”. Proceedings of the 9^th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[⁶⁰] Braun J., Saracoglu B.H., Paniagua G., 2014, “Analysis of continuous detonation wave combustor outlet conditions”. Proceedings of the 9^th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[⁵⁹] Sousa J., Martinez O., Paniagua G., 2014, “Supersonic flow turning in a channel exposed to fluctuating inlet conditions”. Proceedings of the 9^th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[⁵⁸] Fernandez Villace V., Paniagua G., Steelant J., 2014, “Installed performance of an Air-Turbo-Rocket Expander Cycle”. Proceedings of Space Propulsion, European Space Agency. Cologne, Germany, May.

[⁵⁷] Lavagnoli S., Andreoli V., Paniagua G., Fernandez Villace V., 2014, “High-Fidelity Model of a Transient Turbine Facility for Off-Design Aerothermal Testing”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2014-1309. eISBN: 978-1-62410-256-1. National Harbor, USA. January.

[⁵⁶] Paniagua G., Iorio M.C., Vinha N., Sousa J., 2013, “Turbine Airfoil Design for High Supersonic Pulsating Flows”. Proceedings of the 21^st International Symposium on Airbreathing Engines. Busan, Korea. September.

[⁵⁵] Villafañe L., Paniagua G., 2013, “Three-dimensional Aerodynamic Characterization of Turbofan Bypass-flow Heat Exchangers in an Intermittent Transonic facility”. Proceedings of the 43^rd AIAA Fluid Dynamics Conference. https://doi.org/10.2514/6.2013-2728. ISBN: 978-1-62748-891-4. San Diego, USA. June.

[⁵⁴] Paniagua G., and Saracoglu B., 2012, “Tunnel design, testing and experience on shock control using pulsating blowing”. Presented at the 118^th Semi-Annual Meeting of the Supersonic Tunnel Association International. Brussels, Belgium. October.

[⁵³] Grainger A., Boyce R., Tirtey S., Ogawa H., Paniagua G., Paris S., 2012, “The Unsteady Flow Physics of Hypersonic Inlet Starting Processes”. Proceedings of 18^th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Tours, France. September. eISBN: 978-1-60086-931-0.

[⁵²] Rodriguez Miranda I., Fernandez Villace V., Paniagua G., 2012, “Modeling, Analysis and Optimization of the Air Turbo Rocket Expander Engine”. Proceedings of 18^th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://doi.org/10.2514/6.2012-5937. eISBN: 978-1-60086-931-0. Tours, France. September.

[⁵¹] Rocandio P., Paniagua G., Babou Y., 2012, “Airfoil base region control with dielectric barrier discharge”. Proceedings of the 48^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2012-3936. eISBN: 978-1-60086-935-8. Atlanta, USA. July.

[⁵⁰] Saracoglu B., Paniagua G., 2012, “Heat Transfer Investigation on a Transonic Turbine Cascade with Pulsating Trailing Edge Cooling”. Proceedings of the 48^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2012-3880. eISBN: 978-1-60086-935-8. Atlanta, USA. July.

[⁴⁹] Sousa J., Lavagnoli S., Paniagua G., Villafañe L., 2012, “Inverse Heat Flux Evaluation using Conjugate Gradient Methods from Infrared Imaging”. Proceedings of the 12^th Quantitative Infrared Thermography Conference. Naples, Italy. June.

[⁴⁸] Tomasoni F., Saracoglu B., Paniagua G., 2012, “A decision making algorithm for automatic shock waves detection in Schlieren imaging”. Proceedings of the 21^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Valencia, Spain. March.

[⁴⁷] Villafañe L., Paniagua G., 2012, “Numerical Analysis and Characterization of Fine Wire Thermocouples”. Proceedings of the 21^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Valencia, Spain. March.

[⁴⁶] Joly M., Maffulli R., Fernandez Villace V., Paniagua G., Verstraete T., 2011, “Air Turbo Rocket Turbomachinery Design”. Proceedings of the 20^th International Symposium on Airbreathing Engines. Paper 2011-1333. Gotheborg, Sweden. September.

[⁴⁵] Saracoglu B.H., Paniagua G., Yasa T., Duni S., Salvadori S., Martelli F., 2011, “Pulsating Trailing Edge Coolant Blowing in a High-Pressure Supersonic Turbine to Control Shock Waves”. Proceedings of the 20^th International Symposium on Airbreathing Engines. Paper 2011-1729. Gotheborg, Sweden. September.

[⁴⁴] Villafañe L., Yasa T., Paniagua G., Bonfanti G., 2011, “Development of Experimental Techniques for the Characterization of Helicoidal Fin Arrays in Transonic Flow Conditions”. Proceedings of the 47^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-6093. eISBN: 978-1-60086-949-5. San Diego, USA. July. Nominated by the gas turbine engine committee to Best Paper Award.

[⁴³] Vyvey P., Bosschaerts W., Fernandez Villace V., Paniagua G., 2011, “Study of an Airbreathing Variable Cycle Engine”. Proceedings of the 47^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5758. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[⁴²] Fernandez Villace V., Paniagua G., 2011, “Simulation of a Variable-Combined-Cycle engine for dual subsonic and supersonic cruise”. Proceedings of the 47^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-6110. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[⁴¹] Paniagua G., Saracoglu B., Tomasoni F., Salvadori S., Miranda A., Martelli F., 2011, “Modulation of Vane Shocks with Pulsating Coolant Flows”. Proceedings of the 47^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5815. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[⁴⁰] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B., 2011, “Pulsating coolant ejection effects downstream of a transonic rounded trailing edge”. Proceedings of the 47^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5816. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[³⁹] Saracoglu B., Huang G., Paniagua G., 2011, ‘Numerical Study of a Transonic Linear Cascade for Pulsating Trailing Edge Cooling”. Proceedings of the 10^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Brussels, Belgium. July.

[³⁸] Joly M., Verstraete T., Paniagua G., 2011, “Design-Optimization for Compactness of Highly-Loaded Fan Rotor”. Proceedings of the 10^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Brussels, Belgium. July.

[³⁷] Grainger A., Tirtey S.C., Boyce R.R., Paris S., Paniagua G., 2011, “Starting mechanisms for high contraction ratio hypersonic inlets”. Proceedings of the 7^th Aerothermodynamics Symposium, European Space Agency. Brugge, Belgium, May.

[³⁶] Bottini H., Sonda A., Schreivogel P., Paniagua G., 2011, “Design and Qualification of a Supersonic Wind Tunnel for Transition Experiments”. Proceedings of the 7^th Aerothermodynamics Symposium, European Space Agency. Brugge, Belgium, May.

[³⁵] Paniagua G., Garcia Galache J.P., Romero Catala J.M., 2010, “Aerodesign methodology of a supersonic turbine for a pulse detonation engine”. Proceedings of the 7^th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. October.

[³⁴] Bonfanti G., Yasa T., Lavagnoli S., Paniagua G., 2010, “Development of oil dot visualization to measure the shear stress”. Proceedings of the 20^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Milano, Italy. September.

[³³] Villafañe L., Paniagua G., Desset J., Bajusz, Hiernaux S., 2010, “Development of a Transonic Wind Tunnel to investigate Engine Bypass Flow Heat Exchangers”. Proceedings of the 46^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2010-6951. eISBN: 978-1-60086-958-7. Nashville, USA. July.

[³²] Schreivogel P., Paniagua G., Bottini H., Massutti D., Solano J.P., Chazot O., 2010, “Heat transfer investigation in an hypersonic boundary layer”. Proceedings of the 10th Quantitative Infrared Thermography Conference. Québec City, Canada. July.

[³¹] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B., 2010, “Time-resolved analysis of the base region in cooled transonic turbine airfoils”. Proceedings of the 5^th European Conference on Computational Fluid Dynamics, ECCOMAS CFD 2010. Lisbon, Portugal. June.

[³⁰] Gonzalez M., Paniagua G., Saracoglu B., Tiseira A., 2010, “Pulsating cooling system for high-pressure turbine blades”. Proceedings of the 5^th AIAA Flow Control Conference. https://doi.org/10.2514/6.2010-4587. eISBN: 978-1-62410-140-3. Chicago, USA. June.

[²⁹] Fernandez-Villacé V., Paniagua G., 2010, “Simulation and Optimization of Combined Cycles for High Speed Propulsion”. Proceedings of the 48^th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2010-1125. eISBN: 978-1-60086-959-4. Orlando, USA. January.

[²⁸] Schreivogel P., Paniagua G., Bottini H., Massutti D., Solano J.P., Chazot O., 2009, “Hypersonic boundary layer transition measured with thin film gauges”. Presented at the 2009 Ercoftac-Belgium Yearly Seminar, Brussels, Belgium. December.

[²⁷] Billonnet G., Castillon L., Paniagua G., Yasa T., Olive R., 2009, “Experimental and numerical investigations on the HP turbine flow at off-design conditions”. Proceedings of the 19^th International Symposium on Airbreathing Engines. AIAA Paper 2009-1325. Montreal, Canada. September.

[²⁶] Verley S., Castillon L., Paniagua G., 2009, “A comprehensive analysis of clocking effects in a transonic turbine stage using chorochronic simulation and experimental investigations”. Proceedings of the 19^th International Symposium on Airbreathing Engines. AIAA Paper 2009-1215. Montreal, Canada. September.

[²⁵] Lavagnoli S., Yasa T., Paniagua G., 2009, “Aerodynamic Performance of a Multi-splitter LP Vane Downstream of a Transonic HP Turbine Stage”. Proceedings of the 12^th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. London, United Kingdom. September.

[²⁴] Paniagua G., Lavagnoli S., Verstraete T., Mahmoudi W., Benamara T., 2009, “Aerodesign of a Transonic Contrarotating Turbine for a Rocket Engine”. Proceedings of the 45^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6-2009-5105. eISBN: 978-1-60086-972-3. Denver, USA. August.

[²³] Saracoglu B.H., Paniagua G., Rambaud P., 2009, “Blunt trailing edge cooling effects at supersonic regime”. Proceedings of the 45^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. AIAA 2009-5233. https://doi.org/10.2514/6-2009-5233. eISBN: 978-1-60086-972-3. Denver, USA. August.

[²²] Schloegel, F., Paniagua, G, Tirtey, S., 2008, “Active Boundary Layer Trip for Supersonic Flows”. Proceedings of the Sixth European Symposium on Aerothermodynamics for Space Vehicles. Versailles, France. November. SP-659. ISBN: 978-92-9221-223-0. ISSN: 1609-042X. Editors: H. Lacoste & L. Ouwehand.

[²¹] Varvill R., Paniagua G., Kato H., Thatcher M., 2008, “Design and Testing of the Contra-Rotating Turbine for the Scimitar Precooled Mach 5 Cruise Engine”. Proceedings of the 59^th International Astronautical Congress. Paper IAC-08-C4.5.3. Glasgow, UK. September.

[²⁰] Paniagua G., Sieverding C.H., Van den Braembussche R.A., 2008, “Aerodynamic analysis of the Vulcain 2 LOX turbine manifold”. Proceedings of the 44^th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2008-4661. Hartford, USA. July.

[¹⁹] Castillon L., Paniagua G., Yasa T., 2008, “Numerical Analysis of the Unsteady Strong Shock Interactions in a Transonic Turbine”. Proceedings of the 5^th European Congress on Computational Methods in Applied Sciences and Engineering.Venice, Italy, July.

[¹⁸] Tulkens M., Paniagua G., Steiner A., 2008, “Single blade tip clearance measurements in a transient rig”. Proceedings of the 19^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Rhode Saint Genèse, Belgium. April.

[¹⁷] Michalek J., Paniagua G., Vergalla M., Zerelli N., Tulkens M., 2008, “Methodology to implement PSP technique in a transient facility”. Proceedings of the 19^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Rhode Saint Genèse, Belgium. April.

[¹⁶] Paniagua G., Yasa T., de la Loma A., Castillon L., Coton T., 2007, “Unsteady Strong Shocks Interactions in a Transonic Turbine: Experimental and Numerical Analysis”. Proceedings of the 18^th International Symposium on Airbreathing Engines. AIAA Paper 2007-1218. Beijing, China. September.

[¹⁵] Paniagua G., Szokol S., Kato H., Manzini G., Varvill R., 2007, “Design of a Counter-Rotating Turbine for a Hypersonic Aircraft”. Proceedings of the 18^th International Symposium on Airbreathing Engines. AIAA Paper 2007-1341. Beijing, China. September.

[¹⁴] Pau M., de la Loma A., Paniagua G., Delhaye D., 2007, “Film Cooling and Hub Disk Leakage Flow Experiments in a Fully Rotating HP Turbine Stage”. Proceedings of the 5^th IASME / WSEAS International Conference on Fluid Mechanics and Aerodynamics. Athens, Greece. August. ISSN: 1109-2769. ISBN: 978-960-8457-99-7.

[¹³] Herbiet J.F., Paniagua G., Hendrick P., 2007, “Development of an analysis tool for Combined Propulsion Cycles”. Proceedings of the 2^nd European Conference for Aero-Space Sciences. Paper 1-05-01. Brussels, Belgium. July.

[¹²] Jivraj F., Varvill R., Bond A., Paniagua G., 2007, “The Scimitar Precooled Mach 5 Engine”. Proceedings of the 2^nd European Conference for Aero-Space Sciences. Paper 5-08-03. Brussels, Belgium, July.

[¹¹] Adiloglu B., Paniagua G., Yasa T., 2007, “Unsteady Aerodynamic Blade Forces due to Strong Vane Shocks”. Proceedings of the 8^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[¹⁰] Billiard N., Paniagua G., Dénos R., 2007, “Impact of Clocking on the Aero-Thermodynamics of a Second Stator tested in a One and a Half Stage HP Turbine. Part I: Aerodynamic Effects”. Proceedings of the 8^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[⁹] Billiard N., Paniagua G., Dénos R., 2007, “Impact of Clocking on the Aero-Thermodynamics of a Second Stator tested in a One and a Half Stage HP Turbine. Part II: Effects on Heat Transfer”. Proceedings of the 8^th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[⁸] Paniagua G., Yasa T., 2007, “Large vane shock interactions effects in the turbine outlet flow field”. Proceedings of the Conference: “Topical Problems in Fluid Mechanics 2007”. Prague, Czech Republic. February.

[⁷] Van den Braembussche R., Brouckaert J.F., Paniagua G., Briottet L, 2006, “Design and Optimization of a multistage turbine for a helium cooled reactor”. Proceedings of the 3^rd International Topical Meeting on High Temperature Reactor Technology. Paper D00000051. Johannesburg, South Africa. October.

[⁶] Solano J.P., Paniagua G., Dénos, 2006, “2d Data Reduction Technique for Turbine Blade Heat Transfer Measurements Using Double-Layered Thin Film Gauges”. Proceedings of the 18^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Thessaloniki, Greece. September.

[⁵] Delhaye D., Paniagua G., Dénos, 2006, “Development of a three-hole probe for unsteady flow angle measurements”. Proceedings of the 18^th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Thessaloniki, Greece. September.

[⁴] Paniagua G., Persico G., Billiard N., 2006, “Rotor-stator interactions in a one and a half turbine stage”. Proceedings of the 11^th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. Moscow, Russia. September.

[³] Paniagua G., and Yasa T., 2006, “Accurate Turbine Inertia Measurement”. Proceedings of the 7^th National Congress of Theoretical and Applied Mechanics. Mons, Belgium. May.

[²] Paniagua G., Dénos R., Billiard N., 2005, “Aero-thermal investigation of a highly loaded HP turbine”. Proceedings of the II International Scientific and Technical Conference Aero Engines of the XXI Century. Vol. 1, pp 373-374, ISBN 5-94049- 019-0. Moscow, Russia. December.

[¹] Paniagua G., Dénos R., 2000, “Numerical Compensation in the Time Domain of Pressure Sensors”. Proceedings of the 15^th Bi-Annual Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines. Firenze, Italy. September.

Contributions to Books

[²⁴] Paniagua G., Bhatnagar L., Rebassa A., 2022, “Aerothermal measurement techniques”. von Karman Institute Lecture Series on “Stability and Sensitivity Methods for Flow Control and Industrial Design”. von Karman Institute, Rhode Saint Genèse, Belgium. December.

[²³] Schmitt J., Briggs T., Callahan T., Freund S., Kurz R., Neil A., Paniagua G., Sanchez D., 2022, “Heat Engines”. Chapter 4. pp 95-188. Hydrogen Economy Book. Edited by K. Brun and T. Allison. Elsevier. eBook ISBN: 9780323906609. Paperback ISBN: 9780323903943. https://doi.org/10.1016/C2020-0-03643-1.

[²²] Braun J., Paniagua G., Ferguson D., 2022, “Rotating Detonation Combustor Downstream Transition Passage Design Considerations”. King R., Peitsch D. (eds) Active Flow and Combustion Control 2021. AFCC 2021. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 152. Springer, Cham. https://doi.org/10.1007/978-3-030-90727-3_11. ISBN 978-3-030-90726-6.

[²¹] Braun J., Paniagua G., 2019, “Analysis of advanced turbine integration with rotating detonation combustors using a time-accurate reduced order model”. Advances in Pulsed and Continuous Detonations: Applications of Fast Combustion Modes and Detonations in Industry. pp 362-370. Edited by S. Frolov. ISBN 978-5-94588-244-7. Torus Pres. Moscow.

[²⁰] Paniagua G., Saavedra J., Andreoli V., Gonzalez Cuadrado D., 2017, “Wind tunnel design”. von Karman Institute Lecture Series on “Introduction to Stability and Transition Analysis Methods”. von Karman Institute, Rhode Saint Genèse, Belgium. October.

[¹⁹] Braun J., Saracoglu B.H., Paniagua G., 2014, “Analysis of continuous detonation wave combustor outlet conditions”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[¹⁸] Paniagua G., Garcia-Galache J.P., Romero-Catala J.M., 2014, “Aerodesign methodology of a supersonic turbine for a pulse detonation engine”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[¹⁷] Sousa J., Martinez O., Paniagua G., 2014, “Supersonic flow turning in a channel exposed to fluctuating inlet conditions”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[¹⁶] Fernandez Villacé V., Paniagua G., 2014, “Precooled air turbo–rocket engine”. Lecture Series STO-AVT-234 on “Hypersonic Flight Testing”, March, Rhode Saint Genèse, Belgium.

[¹⁵] Fernandez Villacé V., Paniagua G., 2012, “Modeling and Second Principle analysis of combined-cycle engines for high speed propulsion”. von Karman Institute Lecture Series on “Physics-Based Modeling & Simulation for Aerospace Systems”. Wright State University, USA. August. ISBN-13 978-2-87516-038-6.

[¹⁴] Paniagua G., 2012, “Use of detonation in propulsion”. von Karman Institute Lecture Series on “Combustion in Aero-Engines”. von Karman Institute, Rhode Saint Genèse, Belgium. June. ISBN-13 978-2-87516-036-2.

[¹³] Boyce R.R., Ogawa H., Grainger A.L., Tirtey S.C., Paniagua G., Paris S., 2011, “Experimental and numerical research on hypersonic inlet starting processes” RTO-AVT-VKI Lecture Series AVT 195 on “Engine Intake Aerothermal Design: Subsonic to High Speed Applications”, November, Rhode Saint Genèse, Belgium.

[¹²] Bottini H., Paniagua G., 2012, “Qualification of a supersonic test section in a compression tube wind tunnel”. Joly M., Verstraete T., Paniagua G., Cizmas P., “Accelerated optimization for a multi-disciplinary design of transonic and contra-rotating turbomachinery components”. Villafañe L., Paniagua G., Desantes J.M., “Aero-thermal analysis and characterization of fine wire thermocouple probes”. Fernandez-Villace V., Paniagua G., Montanez J.L., “Simulation of a variable-combined cycle engine for dual subsonic and supersonic cruise”. Review of the VKI Doctoral Research. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-031-7.

[¹¹] Bottini H., Paniagua G., 2011, “Design and qualification of a supersonic wind tunnel for transition experiments”. Saracoglu B., Paniagua G., Huang G., “Turbine base pressure active control through trailing edge blowing”. Lavagnoli S., Paniagua G., Desantes J.M., “Accurate turbine blade tip clearance measurements in a short duration wind tunnel”. Villace V., Paniagua G., Montanes J.L., “Numerical modeling of a combined cycle for high speed propulsion”. Villafañe L., Paniagua G., Payri F., “Aerodynamic characterization of helicoidal fin arrays in transonic flow conditions”. Joly M., Verstraete M., Paniagua G., “Accelerated optimization for multi-disciplinary design of contra-rotating and transonic turbomachinery components”. Summaries of Doctoral candidates. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-018-8.

[¹⁰] Lavagnoli S., Paniagua G., Desantes J.M., 2010,“Interaction of an Innovative LP Stator Vane with a Transonic HP Turbine”. Villace V., Paniagua G., Montanes J.L., “Numerical simulation of the SABRE rocket based combined cycle engine”. Bottini H., Paniagua G., Degrez G., “Analysis of transition to turbulence of a supersonic flow over a rigid surface”. Villafañe L. , Paniagua G. , Arts T., Payri F., “Aerodynamic research on surface heat exchangers in the engine bypass flow”. Joly M., Verstraete T., Paniagua G., “Multi-disciplinary optimization for concurrent design of turbomachinery blades”. Summaries of Doctoral candidates. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-011-9.

[⁹] Jivraj F., Varvill R., Bond, A., Paniagua, G., 2007, “The scimitar precooled Mach 5 engine”. Second European Conference for Aero-Space Sciences. Edited by M.L. Riethmuller, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-930389-27-3.

[⁸] Herbiet J.F., Paniagua G., Hendrick P., 2007, “Development of an analysis tool for combined propulsion cycles”. Second European Conference for Aero-Space Sciences. Edited by M.L. Riethmuller, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-930389-27-3. Paper 1-05-01.

[⁷] Dénos R. and Paniagua G., 2006, “Unsteadiness in HP Turbines”. von Karman Institute Lecture Series on “Advances in Turbomachinery Aero-Thermo-Mechanical Design and Analysis”. von Karman Institute LS 2007-02. ISBN-13 978-2-930389-71-0. Wright State University, USA.

[⁶] Paniagua G., Persico G., Billiard N., 2006, “Rotor-stator interactions in a one and a half turbine stage”. Turbomachines: Aeroelasticity, Aeroacoustics and Unsteady Aerodynamics. Edited by V. Skibin, V. Saren, N. Savin, S. Frolov. ISBN 5-94588-041-8. Torus Pres Ltd. Moscow.

[⁵] Dénos R. and Paniagua G., 2005, “Rotor/Stator interaction in Transonic HP Turbines”. von Karman Institute Lecture Series on “Effects of Aerodynamic Unsteadiness in Axial Turbomachines”. von Karman Institute LS 2005-03. ISBN: 2-930389-59-1. Rhode Saint Genèse, Belgium.

[⁴] Paniagua G. and Dénos R., 2005, “Unsteady Temperature Measurements”. von Karman Institute Lecture Series on “Data Acquisition and Signal Processing for Turbomachinery Applications”. Rhode Saint Genèse, Belgium.

[³] Yasa T., Paniagua G. and Dénos R., 2005, “Hotwire Anemometry for Non-Isothermal Flows and Effect of “Aging” of the Sensor Wire”. von Karman Institute Lecture Series on “Data Acquisition and Signal Processing for Turbomachinery Applications”. Rhode Saint Genèse, Belgium.

[²] Paniagua G., 2002, “Investigation of the steady and unsteady performance of a transonic HP turbine”. von Karman Institute Doctoral Thesis. ISBN: 978-2-930389-45-1. Rhode Saint Genèse, Belgium.

[¹] Sieverding C.H., Dénos R., Arts T., Brouckaert J.F., Paniagua G., 1998, “Experimental Investigation of the Unsteady Rotor Aerodynamics and Heat Transfer of a Transonic Turbine Stage”. von Karman Institute Lecture Series on “Blade Row Interference Effects in Axial Turbomachinery Stages”. von Karman Institute LS 1998-02, D/1998/0238/451. Rhode Saint Genèse, Belgium.