Archival Journal Papers (148):

[148] Sawada S., Itouyama N., Matsuoka K., Kasahara J., Braun J., Paniagua G., Kawasaki A., Higashino K, Matsuo A., Funaki I., 2025, “Direction control of Rotating Detonation Waves with Helical Combustion Chambers”. Journal of Propulsion and Power. February. https://doi.org/10.2514/1.B39473. ISSN: 0748-4658. (in 2023 – JCR Impact factor 1.7 – ENGINEERING, AEROSPACE, 17th of 52 journals)

[147] Lasala I., McKelvy A., Braun J., Paniagua G., Choquet E., Andre T., Falempin F., 2024, “Numerical Assessment of an Aerodynamic Probe to Enable Short Focal Length Laser Diagnostics in High Temperature Supersonic Flows Based on Flow Disturbance”. Journal of Turbomachinery. https://doi.org/10.1115/1.4067379. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[146] Fridh, J., Hammer S., Twaddle J., Paniagua G., 2024, “Acoustic Modes in an Open Box Cavity With Variable Depth Using Two Distinct Wind Tunnels”. Journal of Turbomachinery. https://doi.org/10.1115/1.4067459. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[145] Sanchez de la Rosa D., Paniagua G., 2025, “Enhancing Total Temperature Measurement Accuracy: Calibration Procedures and Novel Two-Wire Probes”. Journal of Turbomachinery. Vol. 147, Issue 5, paper 051006, pp 1-12. May. https://doi.org/10.1115/1.4066964. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[144] Pal P., Braun J., Wang Y., Athmanathan V., Paniagua G., Meyer T., 2025, “Large-Eddy Simulation Study of Flow and Combustion Dynamics in a Full-Scale Hydrogen–Air Rotating Detonation Combustor-Stator Integrated System”. Journal of Engineering for Gas Turbines and Power. Vol. 147, Issue 3, paper 031002, pp 1-9. March. https://doi.org/10.1115/1.4066365. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[143] Castillo A., Bhatnagar L., Inhestern L., Paniagua G., 2025, “Comprehensive Experimental Assessment of Unsteady Pressure and Heat Flux in a Small-Core Turbine Over-Tip Shroud”. Journal of Engineering for Gas Turbines and Power. July. https://doi.org/10.1115/1.4067019. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[142] Clark J., Cukurel B., Paniagua G., 2024, “On the Development of High Lift, High Work Low-Pressure Turbines”. Journal of Turbomachinery. Vol. 146, Issue 12, paper 121011, pp 1-12. December. https://doi.org/10.1115/1.4066004. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[141] Grasa S., Paniagua G., 2024, “Design, multi-point optimization and analysis of diffusive stator vanes to enable turbine integration into rotating detonation engines”. Journal of Turbomachinery. Vol. 146, Issue 6, paper 111002, pp 1-12. November. https://doi.org/10.1115/1.4065424. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[140] Braun J., Paniagua G., 2024, “Rotating detonation operability and aero-thermal performance with an integrated diverging nozzle”. Applied Thermal Engineering. Vol. 249, paper 123126, pp 1-15. July. https://doi.org/10.1016/j.applthermaleng.2024.123126. ISSN: 1359-4311. (in 2023 – JCR Impact factor 6.1 – ENERGY & FUELS, 52nd of 171 / ENGINEERING, MECHANICAL, 10th of 183 / MECHANICS, 10th of 170 / THERMODYNAMICS, 7th of 78 journals)

[139] Tuite L., Braun J., Paniagua G., 2024, “Optimization of an HPT Blade and Sector-Based Annular Rig Design for Supercritical CO2 Power Cycle Representative Testing”. Journal of Engineering for Gas Turbines and Power. Vol. 146, Issue 6, paper 061017, pp 1-12. June. https://doi.org/10.1115/1.4063956. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[138] McKelvy A., Braun J., Paniagua G., Andre T., Choquet E., Falempin F., 2024, “Quantitative Definition of Spray Edge With Extinction Diagnostics for Liquid Jets in Supersonic Crossflow”. Journal of Engineering for Gas Turbines and Power. Vol. 146, Issue 6, paper 061014, pp 1-11. June. https://doi.org/10.1115/1.4063887. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[137] Castillo A., Paniagua G., 2024, “Robust Tip Gap Measurements: A Universal In-Situ Dynamic Calibration, Demonstration in a Two-Stage High Speed Turbine”. Journal of Engineering for Gas Turbines and Power. Vol. 146, Issue 6, paper 061016, pp 1-9. June. https://doi.org/10.1115/1.4063886. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[136] Grasa S., Paniagua G., 2024, “Design and characterization of highly diffusive turbine vanes suitable for transonic rotating detonation combustors”. International Journal of Turbomachinery Propulsion and Power. Vol. 9, Issue 18, pp 1-18. May. https://doi.org/10.3390/ijtpp9020018. EISSN: 2504-186X. (in 2023 – JCR Impact factor 1.3 – ENGINEERING, AEROSPACE, 25h of 52 journals / ENGINEERING, MECHANICAL, 130th of 183 journals)

[135] Lazpita E., Garicano-Mena J., Paniagua G., Le Clainche S., Valero E., 2024, “A data-driven sensibility tool for flow control based on resolvent analysis”. Results in Engineering. Vol. 22, paper 102070, pp 1-10. April. https://doi.org/10.1016/j.rineng.2024.102070. ISSN: 2590-1230. (in 2023 – JCR Impact factor 6.0 – ENGINEERING, MULTIDISCIPLINARY, 10th of 181 journals)

[134] Bhatnagar L., Paniagua G., Clemens E., Bloxham M., 2024, “A Probabilistic Approach to Turbine Efficiency”. Journal of Turbomachinery. Vol. 146, paper 041009, pp 1-13. April. https://doi.org/10.1115/1.4064187. ISSN: 0889-504X. (in 2023 – JCR Impact factor 1.9 – ENGINEERING, MECHANICAL, 92nd of 183 journals)

[133] Sahin I., Moya C., Mollaali A., Lin G., Paniagua G., 2024, “Deep Operator Learning-based Surrogate Models with Uncertainty Quantification for Optimizing Internal Cooling Channel Rib Profiles”. International Journal of Heat and Mass Transfer. Vol. 219, paper 124813, pp 1-12. February. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124813. ISSN: 0017-9310. (in 2023 – JCR Impact factor 5.0 –THERMODYNAMICS, 13th of 78 / ENGINEERING, MECHANICAL, 25th of 183 / MECHANICS, 17th of 170 journals)

[132] Inhestern L., Peitsch D., Paniagua G., 2024, “Flow irreversibility and heat transfer effects on turbine efficiency”. Applied Energy. Vol. 353, paper 122077, pp 1-15. January. https://doi.org/10.1016/j.apenergy.2023.122077. ISSN: 0306-2619. (in 2023 – JCR Impact factor 10.1 – ENERGY & FUELS, 19th of 171 / ENGINEERING, CHEMICAL, 11th of 170 journals)

[131] Braun J., Rahbari I., Aye Addo N., Paniagua G., Garicano J., Valero E., la Clanche M., 2024, “Characterization of shock-separation phenomena over wavy shaped geometries through reduced order models”. Experimental Thermal and Fluid Science. Vol. 150. Paper 111021, pp 1-18. January. https://doi.org/10.1016/j.expthermflusci.2023.111021. ISSN: 0894-1777. (in 2023 – JCR Impact factor 2.8 – ENGINEERING, MECHANICAL, 57th of 183 / PHYSICS, FLUIDS & PLASMAS, 9th of 40 / THERMODYNAMICS, 23rd of 78 journals)

[130] Mollaali A., Sahin I., Moya C., Iqrar R., Lin G., Paniagua G., 2023, “A physics-guided bi-fidelity operator learning framework for predicting a cylinder’s drag and lift coefficients time-evolution”. Fluids. Vol. 8, paper 323, pp 1-21. December. https://doi.org/10.3390/fluids8120323. ISSN: 2311-5521. (in 2023 – JCR Impact factor 1.8 – MECHANICS, 103rd of 170 / PHYSICS, FLUIDS & PLASMAS, 23rd of 40 journals)

[129] Rebassa A., Bhatnagar L., Paniagua G., 2023, “Parametric study of small-size truncated Venturi flow meters”. Flow Measurement and Instrumentation. Vol. 94, paper 102475, pp 1-14. December. https://doi.org/10.1016/j.flowmeasinst.2023.102475. ISSN: 0955-5986. (in 2023 – JCR Impact factor 2.3 – ENGINEERING, MECHANICAL, 72nd  of 183 / INSTRUMENTS & INSTRUMENTATION, 31st of 76 journals)

[128] Salinas S., Castillo A., Bloxham M., Paniagua G., 2023, “Comprehensive sensor gap calibration for high-speed fluid machinery tip clearance characterization”. Measurement. Vol. 218, paper 113117, pp 1-20. August. https://doi.org/10.1016/j.measurement.2023.113117. ISSN: 0263-2241. (in 2023 – JCR Impact factor 5.2 – INSTRUMENTS & INSTRUMENTATION 11th of 76 / ENGINEERING, MULTIDISCIPLINARY, 17th of 179 journals)

[127] Inhestern L., Peitsch D., Paniagua G., 2023, “Underlying Physics of the starting of supersonic nozzles”. Aerospace science and technology. Vol. 139, paper 108404, pp 1-15. August. https://doi.org/10.1016/j.ast.2023.108404. ISSN: 1270-9638. (in 2023 – JCR Impact factor 5.0 – ENGINEERING, AEROSPACE, 6th of 52 journals)

[126] Rebassa A., Rahbari I, Paulson J., Paniagua G., 2023, “Aerothermal characterization of finned surfaces in high-speed flows”. Applied Thermal Engineering. Vol. 227, paper 120331 (14 pages). June. https://doi.org/10.1016/j.applthermaleng.2023.120331. ISSN: 1359-4311. (in 2023 – JCR Impact factor 6.1 – ENERGY & FUELS, 52nd of 171 / ENGINEERING, MECHANICAL, 10th of 183 / MECHANICS, 10th of 170 / THERMODYNAMICS, 7th of 78 journals)

[125] Nowak H., Lluesma-Rodriguez F., Rahbari I., Clark J., Paniagua G., 2023, “Response of separated boundary layers to steady and pulsated flow injection in transonic internal flows”. Journal of Engineering for Gas Turbines and Power. Vol. 145, paper 061001 (14 pages). June. https://doi.org/10.1115/1.4056184. ISSN: 0742-4795. (in 2023 – JCR Impact factor 1.4 – ENGINEERING, MECHANICAL, 124th of 183 journals)

[124] Kasahara J., Nakata K., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2023, “Experimental investigation of inner flow of a throat less diverging rotating detonation engine”. Proceedings of the Combustion Institute. June. https://doi.org/10.1016/j.proci.2022.08.089. ISSN: 1540-7489. (in 2023 – JCR Impact factor 5.3 – THERMODYNAMICS, 11th of 78 / ENERGY & FUELS 68th of 171 / ENGINEERING, CHEMICAL, 33rd of 170 / ENGINEERING, MECHANICAL, 18th of 183 journals)

[123] Vyas U., Braun J., Andreoli V., Paniagua G., 2023, “Short engine intakes: Design and trade-off aerodynamic recommendations”. Aerospace science and technology. Vol. 134, paper 108164 (16 pages). March. https://doi.org/10.1016/j.ast.2023.108164. ISSN: 1270-9638. (in 2023 – JCR Impact factor 5.0 – ENGINEERING, AEROSPACE, 6th of 52 journals)

[122] Huber K., Rodiger T., Bhatnagar L., Paniagua G., 2023, “Atomic Layer Thermopiles: Comprehensive Calibration, Comparison and Application in High Speed Internal Flows”. International Journal of Thermal Sciences. Vol. 183, pp 107881. January. https://doi.org/10.1016/j.ijthermalsci.2022.107881. ISSN: 1290-0729. (in 2023 – JCR Impact factor 4.9 – ENGINEERING, MECHANICAL, 28th of 183 / THERMODYNAMICS, 15th of 78 journals)

[121] Vilag V., Paniagua G., Vladuca I., Sanchez de la Rosa D., Suciu C., 2022, “Traverse gear system for measuring probes angular positioning into the BRASTA wind tunnel”. TURBO Scientific Journal. Vol 9, No. 2, pp 19-26. December. http://www.comoti.ro/docs/jurnal/Journal%20TURBO_Vol%20IX_No_2.pdf. ISSN: 2559-608X.

[120] Sousa J., Paniagua G., Collado E., 2022, “Supersonic turbine design suitable for detonation based engines”. Chinese Journal of Aeronautics. Vol. 35, Issue 11, pp 33-44. November. https://doi.org/10.1016/j.cja.2022.04.003. ISSN: 1000-9361. (in 2022 – JCR Impact factor 5.7 – ENGINEERING, AEROSPACE, 2nd of 34 journals)

[119] Lui H.F.S., Riccardi T.R., Wolf W.R., Braun J., Rahbari I., Paniagua G., 2022, “Unsteadiness of shock-boundary layer interactions in a Mach 2.0 supersonic turbine cascade”. Physical Review Fluids. Vol. 7, Paper 094602. September. https://doi.org/10.1103/PhysRevFluids.7.094602. ISSN: 2469-990X. (in 2022 – JCR Impact factor 2.7 – PHYSICS, FLUIDS & PLASMAS 14th of 34)

[118] Lozano F., Saavedra J., Paniagua G., 2022, “Aero-thermal numerical characterization of blunt fin-induced shock wave-boundary layer interaction and its control leading-edge cooling injection”. Physics of Fluids. Vol. 34, Issue 9. Paper 096110, pp 1-16. September. https://doi.org/10.1063/5.0102243. ISSN: 1070-6631. (in 2022 – JCR Impact factor 4.6 – MECHANICS, 24th of 137 / PHYSICS, FLUIDS & PLASMAS, 2nd of 34 journals)

[117] Carbajosa C., Martinez-Cava A., Valero E., Paniagua G., 2022, “Efficiency of pulsating base bleeding to control trailing edge flow configurations”. Applied Sciences. July. https://doi.org/10.3390/app12136760. ISSN: 2076-3417. (in 2022 – JCR Impact factor 2.7 – CHEMISTRY, MULTIDISCIPLINARY, 100th of 178 / ENGINEERING MULTIDISCIPLINARY 42nd of 90 / MATERIALS SCIENCE, MULTIDISCIPLINARY, 208th of 344 / PHYSICS, APPLIED 78th of 160 journals)

[116] Lozano F., Rahbari I., Lin G., Paniagua G., 2022, “Stochastic boundary condition effects on supersonic leading-edge blowing”. Computers and Fluids. Vol. 243. July. https://doi.org/10.1016/j.compfluid.2022.105513. ISSN: 0045-7930. (in 2022 – JCR Impact factor 2.8 – COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 72nd of 110 / MECHANICS, 52nd of 137 journals)

[115] Nakata K., Ota K., Ito S., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Kasahara J., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2022, “Supersonic exhaust from a rotating detonation engine with throatless diverging channel”. AIAA Journal. Vol.60, Issue 7, pp 4015-4023. July. https://doi.org/10.2514/1.J061300. ISSN: 0001-1452. (in 2022 – JCR Impact factor 2.5 – ENGINEERING, AEROSPACE, 11th of 34 journals)

[114] Braun J., Falempin F., Paniagua G., 2022, “Energy analysis of a detonation combustor with a bladeless turbine, a propulsion unit for subsonic to hypersonic flight”. Energy Conversion and Management. Vol. 262, paper 115491 (17 pages). June. https://doi.org/10.1016/j.enconman.2022.115491. ISSN: 0196-8904. (in 2022 – JCR Impact factor 10.4 – THERMODYNAMICS 2nd of 63 / ENERGY & FUELS 17th of 119 / MECHANICS 3rd of 137 journals)

[113] Athmanathan V., Braun J., Ayers Z.M., Fugger C., Webb A.M., Slipchenko M., Paniagua G., Roy S., Meyer T., 2022, “On the effects of reactant stratification and wall curvature in a non-premixed rotating detonation combustor”. Combustion and Flame. Vol. 240, paper 112013 (17 pages). June. https://doi.org/10.1016/j.combustflame.2022.112013. Most downloaded paper. ISSN: 0010-2180. (in 2022 – JCR Impact factor 4.4 – THERMODYNAMICS 13th of 63 / ENGINEERING. MULTIDISCIPLINARY 23th of 90 / ENGINEERING, MECHANICAL 29th of 136/ ENGINEERING, CHEMICAL 43rd of 142 / ENERGY & FUELS 62nd of 119 journals)

[112] Aye-Addo P.A.N., Paniagua G., Gonzalez-Cuadrado D., Bhatnagar L., Castillo A., Braun J., Gomez-Gomez M., Meyer T., Bloxham M., 2022, “Development of a lifetime pressure sensitive paint procedure for high-pressure vane testing”. Journal of Turbomachinery. Vol. 144, paper 051005-1 (11 pages). May. https://doi.org/10.1115/1.4052739. ISSN: 0889-504X. (in 2022 – JCR Impact factor 1.7 – ENGINEERING, MECHANICAL, 98th of 136 journals)

[111] Saavedra J., Grossier G., Chazot O., Paniagua G., 2022, “Start-up analysis of a hypersonic short duration facility”. AIAA Journal. April. https://doi.org/10.2514/1.J060306. ISSN: 0001-1452. (in 2022 – JCR Impact factor 2.5 – ENGINEERING, AEROSPACE, 11th of 34 journals)

[110] Krane P., Gonzalez Cuadrado D., Lozano F., Paniagua G., Marconnet A., 2022, “Sensitivity-coefficient based inverse heat conduction method for identifying hot spots in electronics: A comparison of grid refinement methods”. Journal of Electronic Packaging. Vol. 144, Issue 1, paper 011008 (10 pages). March. https://doi.org/10.1115/1.4050200. ISSN: 1043-7398. (in 2022 – JCR Impact factor 1.6 – ENGINEERING, ELECTRICAL & ELECTRONIC, 213th of 275 / ENGINEERING, MECHANICAL, 103rd of 136)

[109] Bhatnagar L., Paniagua G., Gonzalez-Cuadrado D., Aye-Addo P.A.N., Castillo A., Lozano F., Bloxham M., 2022, “Uncertainty in high-pressure stator performance measurement in an annular cascade at engine-representative Reynolds and Mach”. Journal of Engineering for Gas Turbines and Power. Vol. 144, paper 021001 (11pages). February. https://doi.org/10.1115/1.4052385. ISSN: 0742-4795. (in 2022 – JCR Impact factor 1.5 – ENGINEERING, MECHANICAL, 113th of 136 journals)

[108] Andreoli V., Paniagua G., Bloxham M., 2021, “Towards desensitization of gas turbines performance to tip clearance design optimization and engine analysis”. Energy Conversion and Management. Vol. 245, paper 114575 (14 pages). October. https://doi.org/10.1016/j.enconman.2021.114575. ISSN: 0196-8904. (in 2021 – JCR Impact factor 11.533 – THERMODYNAMICS 2nd of 63/ ENERGY & FUELS 14th of 119 / MECHANICS 3rd of 138 journals)

[107] Athmanathan V., Rahman K.R., Lauriola D., Braun J., Paniagua G., Slipchenko M., Roy S., Meyer T., 2021, “Femtosecond/picosecond rotational coherent anti-Stokes Raman scattering thermometry in the exhaust of a rotating detonation combustor”. Combustion and Flame. Vol. 231, paper 111504 (12 pages). September. https://doi.org/10.1016/j.combustflame.2021.111504. ISSN: 0010-2180. (in 2021 – JCR Impact factor 5.767 – THERMODYNAMICS 8th of 63 / ENGINEERING. MULTIDISCIPLINARY 13th of 92 / ENGINEERING, MECHANICAL 13th of 137/ ENGINEERING, CHEMICAL 31st of 142 / ENERGY & FUELS 51st of 119 journals)

[106] Saavedra J., Paniagua G., 2021, “Experimental analysis of Reynolds effect on flow detachment and sudden flow release on a wall mounted hump”. Experimental Thermal and Fluid Science. Vol. 126, paper 110398 (13 pages). August. https://doi.org/10.1016/j.expthermflusci.2021.110398. ISSN: 0894-1777. (in 2021 – JCR Impact factor 3.370 – ENGINEERING, MECHANICAL, 52nd of 137 / PHYSICS, FLUIDS & PLASMAS, 10th of 34 / THERMODYNAMICS, 22nd of 63 journals)

[105] De Maesschalck C., Andreoli V., Paniagua G., Gillen T., Barker B., 2021, “Aerothermal optimization of turbine squealer tip geometries with arbitrary cooling injection”. Journal of Turbomachinery. Vol. 143, Issue 11, paper 111010 (12 pages). June. https://doi.org/10.1115/1.4051268. ISSN: 0889-504X. (in 2021 – JCR Impact factor 1.792 – ENGINEERING, MECHANICAL, 97th of 137 journals)

[104] Martinez Cava A., Rodriguez D., Valero E., Paniagua G., 2021, “Characterization of base bleed effects on subsonic trailing edge flows”. Aerospace science and technology. Vol. 113, paper 106730 (11 pages). June. https://doi.org/10.1016/j.ast.2021.106730. ISSN: 1270-9638. (in 2021 – JCR Impact factor 5.457 – ENGINEERING, AEROSPACE, 2nd of 34 journals)

[103] Saavedra J., Lozano F., Paniagua G., Fisher J., Webb A., Meyer T., 2021, “Flow conditioning for tri-sonic blow down wind tunnels”. Flow Measurement and Instrumentation. Vol. 79, paper 101910 (19 pages). June. https://doi.org/10.1016/j.flowmeasinst.2021.101910. ISSN: 0955-5986. (in 2021 – JCR Impact factor 2.420 – ENGINEERING, MECHANICAL, 72nd of 137 / INSTRUMENTS & INSTRUMENTATION, 35th of 64 journals)

[102] Inman D., Gonzalez Cuadrado D., Andreoli V., Fisher J., Paniagua G., Aye-Addo A. N., Bhatnagar L., Lozano F., Meyer T., Bloxham M., 2021, “Particle Image Velocimetry in a High-Pressure Turbine Stage at Aerodynamically Engine Representative Conditions”. Journal of Engineering for Gas Turbines and Power. Vol. 143, Issue 6, paper 061031 (10 pages). June. https://doi.org/10.1115/1.4049448. ISSN: 0742-4795. (in 2021 – JCR Impact factor 1.732 – ENGINEERING, MECHANICAL, 101st of 137 journals)

[101] Rahbari I., Cukurel B., Paniagua G., 2021, “Acoustic pulsation for heat transfer abatement in supersonic channel flow”. Physics of Fluids. Vol. 33. Issue 3, paper 035104 (14 pages). March. https://doi.org/10.1063/5.0037078. ISSN: 1070-6631. (in 2021 – JCR Impact factor 4.980 – MECHANICS, 18th of 138 / PHYSICS, FLUIDS & PLASMAS, 2nd of 34 journals)

[100] Braun J., Paniagua G., Falempin F., 2021, “Aero-thermal Optimization of Bladeless Turbines”. Journal of Engineering for Gas Turbines and Power. Vol. 143, Issue 3, paper 031023 (11 pages). March. https://doi.org/10.1115/1.4049355. ISSN: 0742-4795. (in 2021 – JCR Impact factor 1.732 – ENGINEERING, MECHANICAL, 101st of 137 journals)

[99] Yokoo R., Goto K., Kasahara J., Athmanathan V., Braun J., Paniagua G., Meyer T., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., 2021, “Experimental study of internal flow structures in cylindrical rotating detonation engines”. Proceedings of the Combustion Institute. Vol. 38, Issue 3, pp. 3759-3768. March. https://doi.org/10.1016/j.proci.2020.08.001. ISSN: 1540-7489. (in 2021 – JCR Impact factor 6.535 – THERMODYNAMICS, 5th of 63 / ENERGY & FUELS 41st of 119 / ENGINEERING, CHEMICAL, 26th of 142 / ENGINEERING, MECHANICAL, 8th of 137 journals)

[98] Saavedra J., Athmanathan V., Paniagua G., Meyer T., Straub D., Black J., Ramesh S., 2021, “Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green´s Functions”. Journal of Turbomachinery. Vol. 143, Issue 2, 021005. (16 pages). February. https://doi.org/10.1115/1.4049613. ISSN: 0889-504X. (in 2021 – JCR Impact factor 1.792 – ENGINEERING, MECHANICAL, 97th of 137 journals)

[97] Wang Y., Ferrer E., Paniagua G., Saavedra J., Valero E., 2021, “Stability analysis-based optimization to control flow separation over a diffusing passage”. Physics of Fluids. January. Vol. 33, 014103 (12 pages). https://doi.org/10.1063/5.0034892. ISSN: 1070-6631. (in 2021 – JCR Impact factor 4.980 – MECHANICS, 18th of 138 / PHYSICS, FLUIDS & PLASMAS, 2nd of 34 journals)

[96] Lozano F., Paniagua G., 2020, “Airfoil leading edge blowing to control bow shock waves”. Nature Scientific Reports. Vol. 10, 21922. (18 pages). December. https://doi.org/10.1038/s41598-020-79048-w. ISSN: 2045-2322. (in 2020 – JCR Impact factor 4.379 – MULTIDISCIPLINARY SCIENCES, 17th of 73 journals)

[95] Liu Z, Braun J., Paniagua G., 2020, “Thermal power plant upgrade via a rotating detonation combustor and retrofitted turbine with optimized endwalls”. International Journal of Mechanical Sciences. Vol. 188, paper 105918 (11 pages). December. https://doi.org/10.1016/j.ijmecsci.2020.105918. ISSN: 0020-7403. (in 2020 – JCR Impact factor 5.329 – ENGINEERING, MECHANICAL, 12th of 133 / MECHANICS, 12th of 135 journals)

[94] Juangphanich P., Paniagua G., 2020, “Aero-thermal optimization of the rim seal cavity to enhance rotor platform thermal protection”. International Journal of Turbo & Jet-Engines. (12 pages). September. https://doi.org/10.1515/tjj-2020-0020. ISSN: 0334-0082. (in 2020 – JCR Impact factor 1.082 – ENGINEERING, AEROSPACE 26th of 34 journals)

[93] Liu Z, Braun J., Paniagua G., 2020, “Integration of a transonic high-pressure turbine with a rotating detonation combustor and a diffuser”. International Journal of Turbo & Jet-Engines. (10 pages). July. https://doi.org/10.1515/tjj-2020-0016. ISSN: 0334-0082. (in 2020 – JCR Impact factor 1.082 – ENGINEERING, AEROSPACE 26th of 34 journals)

[92] Gonzalez Cuadrado D., Lozano F., Paniagua G., 2020, “Experimental demonstration of inverse heat transfer methodologies for turbine applications”. Journal of Turbomachinery. Vol. 142, Issue 6, paper 061009 (10 pages). June. https://doi.org/10.1115/1.4046546. ISSN: 0889-504X. (in 2020 – JCR Impact factor 1.688 – ENGINEERING, MECHANICAL, 92nd of 133 journals)

[91] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2020, “Non-linear non-iterative transient inverse conjugate heat transfer method applied to microelectronics”. International Journal of Heat and Mass Transfer. Vol. 152, paper 119503 (12 pages). May. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119503. ISSN: 0017-9310. (in 2020 – JCR Impact factor 5.584 –THERMODYNAMICS, 5th of 60 / ENGINEERING, MECHANICAL, 10th of 133 / MECHANICS, 9th of 135 journals)

[90] Saavedra J, Poggie J., Paniagua G., 2020, “Response of a turbulent boundary layer to rapid freestream acceleration”. Physics of Fluids. Vol. 32, Issue 4, paper 045105 (22 pages). April. https://doi.org/10.1063/5.0004421. ISSN: 1070-6631. (in 2020 – JCR Impact factor 3.521 – MECHANICS, 38th of 135 / PHYSICS, FLUIDS & PLASMAS, 6th of 34 journals)

[89] Braun J., Paniagua G., Falempin F., Le Naour B., 2020, “Design and experimental assessment of bladeless turbines for axial inlet supersonic flows”. Journal of Engineering for Gas Turbines and Power. Vol. 142, Issue 4, paper 041024 (10 pages). April. https://doi.org/10.1115/1.4045359. ISSN: 0742-4795. (in 2020 – JCR Impact factor 1.209 – ENGINEERING, MECHANICAL, 112th of 133 journals)

[88] Inhestern L.B., Braun J., Paniagua G., Serrano J.R., 2020, “Design, optimization and analysis of supersonic radial turbines”. Journal of Engineering for Gas Turbines and Power. March. Vol. 142, Issue 3, paper 031023 (12 pages). https://doi.org/10.1115/1.4044972. ISSN: 0742-4795. (in 2020 – JCR Impact factor 1.209 – ENGINEERING, MECHANICAL, 112th of 133 journals)

[87] Fisher J., Braun J., Meyer T., Paniagua G., 2020, “Application of Femtosecond Laser Electronic Tagging Velocimetry in a bladeless turbine”. Measurement Science and Technology. Vol. 31, Number 6, paper 064005 (11 pages). March. https://doi.org/10.1088/1361-6501/ab7062. ISSN: 0957-0233. (in 2020 – JCR Impact factor 2.046 – ENGINEERING, MULTIDISCIPLINARY, 49th of 91 / INSTRUMENTS & INSTRUMENTATION, 34th of 64 journals)

[86] Rahbari I., Paniagua G., 2020, “Acoustic streaming in turbulent compressible channel flow for heat transfer enhancement”. Journal of Fluid Mechanics. Vol. 889, A2, (22 pages). February. https://doi.org/10.1017/jfm.2020.69. ISSN: 0022-1120. (in 2020 – JCR Impact factor 3.627 – MECHANICS, 36th of 135 / PHYSICS, FLUIDS & PLASMAS, 4th of 34 journals)

[85] Agarwal T., Rahbari I., Saavedra J., Paniagua G., Cukurel B., 2020, “Multi-fidelity analysis of acoustic streaming in forced convection heat transfer”. Journal of Heat Transfer. Vol. 142, Issue 2, paper 021801 (12 pages). February. https://doi.org/10.1115/1.4045306. ISSN: 0022-1481. (in 2020 – JCR Impact factor 2.021 – ENGINEERING, MECHANICAL, 75th of 133 / THERMODYNAMICS, 37th of 60 journals)

[84] Bottini H., Saracoglu B., Paniagua G., 2019, “Experimental characterization of the supersonic transitional wake downstream a single roughness element”. Journal of Thermal Science. Vol. 29, pp. 1085–1093. November. https://doi.org/10.1007/s11630-019-1198-1. ISSN: 1003-2169. (in 2019 – JCR Impact factor 1.972 – THERMODYNAMICS 30th of 61 / ENGINEERING, MECHANICAL 64th of 130 journals)

[83] Juangphanich P., De Maesschalck C., Paniagua G., 2019, “Turbine passage design methodology to minimize entropy production, a two step optimization strategy”. Entropy. Vol 21, Issue 6, (17 pages). June. http://dx.doi.org/10.3390/e21060604. ISSN: 1099-4300. (in 2019 – JCR Impact factor 2.494 – PHYSICS, MULTIDISCIPLINARY, 33rd of 85 journals)

[82] Andreoli V., Braun J., Paniagua G., De Maesschalck C., Bloxham M., Cummings W., Langford L., 2019, “Aerothermal optimization of fully cooled turbine blade tips”. Journal of Turbomachinery. Vol. 141. Issue 6, 061007, (10 pages). June. https://doi.org/10.1115/1.4041961. ISSN: 0889-504X. (in 2019 – JCR Impact factor 2.713 – ENGINEERING, MECHANICAL, 40th of 130 journals)

[81] Saavedra J., Paniagua G., Chazot O., 2019, “Thermal boundary layer response to periodic fluctuations”. Journal of Engineering for Gas Turbines and Power. Vol. 141. Issue 3, paper 031009, (9 pages). March.  http://dx.doi.org/10.1115/1.4041138. ISSN: 0742-4795. (in 2019 – JCR Impact factor 1.804 – ENGINEERING, MECHANICAL, 72nd of 130 journals)

[80] Liu Z., Braun J., Paniagua G., 2019, “Characterization of a supersonic turbine downstream of a rotating detonation combustor”. Journal of Engineering for Gas Turbines and Power. Vol. 141. Issue 3, paper 031501 (13 pages). March. http://dx.doi.org/10.1115/1.4040815. ISSN: 0742-4795. (in 2019 – JCR Impact factor 1.804 – ENGINEERING, MECHANICAL, 72nd of 130 journals)

[79] Paniagua G., Gonzalez Cuadrado D., Saavedra J., Andreoli V., Meyer T., Solano J.P., Herrero R., Meyer S., Lawrence D., 2019, “Design of the Purdue Experimental Turbine Aerothermal Laboratory for optical and surface aero-thermal measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 012601 (13 pages). January. http://dx.doi.org/10.1115/1.4040683. ISSN: 0742-4795. (in 2019 – JCR Impact factor 1.804 – ENGINEERING, MECHANICAL, 72nd of 130 journals)

[78] Gonzalez Cuadrado D., Lozano F., Andreoli V., Paniagua G., 2019, “Engine scalable rotor casing convective heat flux evaluation using inverse heat transfer methods”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 011012 (10 pages). January. http://dx.doi.org/10.1115/1.4040713. ISSN: 0742-4795. (in 2019 – JCR Impact factor 1.804 – ENGINEERING, MECHANICAL, 72nd of 130 journals)

[77] Saavedra J., Paniagua G., 2019, “Transient performance of separated flows: Characterization and active flow control”. Journal of Engineering for Gas Turbines and Power. Vol. 141, Issue 1, paper 011002 (11 pages). January. http://dx.doi.org/10.1115/1.4040685. ISSN: 0742-4795. (in 2019 – JCR Impact factor 1.804 – ENGINEERING, MECHANICAL, 72nd of 130 journals)

[76] Xisto C., Petit O., Lundbladh A., Gronstedt T., Rolt A., Paniagua G., 2018, “The Efficiency of a Pulsed Detonation Combustor-Axial Turbine Integration”. Aerospace science and technology. Vol 82-83, pp 80-91. November. https://doi.org/10.1016/j.ast.2018.08.038. ISSN: 1270-9638. (in 2018 – JCR Impact factor 2.829 – ENGINEERING, AEROSPACE, 3rd of 31 journals)

[75] Villafañe L., Paniagua G., 2018, “Aerodynamic impact of finned heat exchangers on transonic flows”. Experimental Thermal and Fluid Science. Vol. 97, pp 223-236. October. https://doi.org/10.1016/j.expthermflusci.2018.04.012. ISSN: 0894-1777. (in 2018 – JCR Impact factor 3.493 – ENGINEERING, MECHANICAL, 19th of 129 / PHYSICS, FLUIDS & PLASMAS, 5th of 32 / THERMODYNAMICS, 8th of 60 journals)

[74] Saavedra J, Paniagua G., Lavagnoli S., 2018, “On the transient response of the turbulent boundary layer inception in compressible flows”. Journal of Fluid Mechanics. Vol. 850, pp 1117-1141. September.http://dx.doi.org/10.1017/jfm.2018.502. ISSN: 0022-1120. (in 2018 – JCR Impact factor 3.137 – MECHANICS, 20th of 134 / PHYSICS, FLUIDS & PLASMAS, 7th of 32 journals)

[73] Andreoli V., Gonzalez Cuadrado D., Paniagua G., 2018, “Prediction of the Turbine Tip Convective Heat Flux Using Discrete Green Functions”. Journal of Heat Transfer. Vol. 140, paper 071703 (11 pages). July. http://doi.org/10.1115/1.4039182. ISSN: 0022-1481. (in 2018 – JCR Impact factor 1.479 – ENGINEERING, MECHANICAL, 69th of 128 / THERMODYNAMICS, 31st of 59 journals)

[72] Braun J., Sousa J, Paniagua G., 2018, “Numerical assessment of the convective heat transfer in rotating detonation combustors using a reduced order model”. Applied Sciences. Vol. 8, Issue 6, 893, (15 pages). May. https://doi.org/10.3390/app8060893. ISSN: 2076-3417. (in 2018 – JCR Impact factor 2.217 – CHEMISTRY, MULTIDISCIPLINARY, 89th of 172, MATERIALS SCIENCE, MULTIDISCIPLINARY, 151th of 293 / PHYSICS, APPLIED 67th of 148 journals)

[71] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2018, “Inverse Conduction Heat Transfer and Kringing Interpolation Applied to Temperature Sensor Location in Microchips”. Journal of Electronic Packaging. Vol. 140, paper 010905 (8 pages). March. http://doi.org/10.1115/1.4039026. ISSN: 1043-7398. (in 2018 – JCR Impact factor 1.990 – ENGINEERING, ELECTRICAL & ELECTRONIC, 144th of 266 / ENGINEERING, MECHANICAL, 61st of 129)

[70] Liu Z., Paniagua G., 2018, “Design of directional probes for high-frequency turbine measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 140, paper 011601 (10 pages). January. https://doi.org/10.1115/1.4037640. ISSN: 0742-4795. (in 2018 – JCR Impact factor 1.653 – ENGINEERING, MECHANICAL, 73rd of 129 journals)

[69] Sousa J., Braun J., Paniagua G., 2017, “Development of a fast evaluation tool for rotating detonation combustors”. Applied Mathematical Modelling. Vol. 52, pp 42-52, December. https://doi.org/10.1016/j.apm.2017.07.019. ISSN: 0307-904X. (in 2017 – JCR Impact factor 2.617 – ENGINEERING, MULTIDISCIPLINARY, 18th of 86 / MATHEMATICS, INTERDISCIPLINARY APPLICATIONS, 15th of 103 / MECHANICS, 25th of 134 journals)

[68] Sousa J, Paniagua G., Collado Morata E., 2017, “Thermodynamic analysis of a gas turbine engine with a rotating detonation combustor”. Applied Energy. Vol. 195, pp 247-256, June. https://doi.org/10.1016/j.apenergy.2017.03.045. ISSN: 0306-2619. (in 2017 – JCR Impact factor 7.900 – ENERGY & FUELS, 8th of 97 / ENGINEERING, CHEMICAL, 4th of 135 journals)

[67] Sousa J., Paniagua G., Saavedra J., 2017, “Aerodynamic response of internal passages to pulsating inlet supersonic conditions”. Computers and Fluids. Vol. 149, pp 31-40. June. https://doi.org/10.1016/j.compfluid.2017.03.005. ISSN: 0045-7930. (in 2017 – JCR Impact factor 2.221 – COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 43rd of 105 / MECHANICS, 42nd of 134 journals)

[66] Braun J., Saracoglu B.H, Paniagua G., 2017, “Unsteady performance of rotating detonation engines with different exhaust nozzles”. Journal of Propulsion and Power. Vol. 33, pp 121-130. June. https://doi.org/10.2514/1.B36164. ISSN: 0748-4658. (in 2017 – JCR Impact factor 1.362 – ENGINEERING, AEROSPACE, 11th of 31 journals)

[65] Saavedra J., Paniagua G., Saracoglu B., 2017, “Experimental characterization of the vane heat flux under pulsating trailing-edge blowing”. Journal of Turbomachinery. Vol. 139, pp 1-7. June. https://doi.org/10.1115/1.4035211. ISSN: 0889-504X. (in 2017 – JCR Impact factor 2.453 – ENGINEERING, MECHANICAL, 31st of 128 journals)

[64] De Maesschalck C., Lacor C., Paniagua G., Lavagnoli S., Remiot A., Bricteux L., 2017, “Performance Robustness of Turbine Squealer Tip Designs due to Manufacturing and Engine Operation”. Journal of Propulsion and Power. Vol. 33, pp 740-749. April. https://doi.org/10.2514/1.B36081. ISSN: 0748-4658. (in 2017 – JCR Impact factor 1.362 – ENGINEERING, AEROSPACE, 11th of 31 journals)

[63] Ornano F., Braun J., Saracoglu B.H, Paniagua G., 2017, “Multi-stage nozzle shape optimization for pulsed hydrogen-air detonation combustor”. Advances in Mechanical Engineering. Vol. 9, pp 1–9. February. https://doi.org/10.1177/1687814017690955. ISSN: 1687-8132. (in 2017 – JCR Impact factor 0.848 – THERMODYNAMICS, 49th of 59 / ENGINEERING, MECHANICAL, 103rd of 128 journals)

[62] De Maesschalck C., Lavagnoli S., Paniagua G., Verstraete T., Olive R., Picot P., 2016, “Heterogeneous Optimization Strategies for Carved and Squealer-like Turbine Blade Tips”. Journal of Turbomachinery. Vol. 138, Issue 12, pp 1-12. December. http://doi.org/10.1115/1.4033975. ISSN: 0889-504X. (in 2016 – JCR Impact factor 1.731 – ENGINEERING, MECHANICAL, 49th of 130 journals)

[61] Braun J., Saracoglu B.H, Magin T., Paniagua G., 2016, “One-dimensional analysis of the MagnetoHydrodynamic effect in Rotating Detonation Combustors”. AIAA Journal. Vol. 54, pp 3761-3767. October. https://doi.org/10.2514/1.J054989. ISSN: 0001-1452. (in 2016 – JCR Impact factor 1.638 – ENGINEERING, AEROSPACE, 6th of 31 journals)

[60] Vinha N., Paniagua G., Sousa J., Saracoglu B., 2016, “Axial bladeless turbine suitable for high supersonic flows”. Journal of Propulsion and Power. Vol. 32, issue 4, pp 975-983. June. http://doi.org/10.2514/1.B35818. ISSN: 0748-4658. (in 2016 – JCR Impact factor 1.144 – ENGINEERING, AEROSPACE, 12th of 31 journals)

[59] Andreoli V., Lavagnoli S., Paniagua G., Fernandez Villace V., 2016, “Robust Model of a Transient Wind Tunnel for Off-Design Aerothermal Testing of Turbomachinery”. Measurement. Vol. 82, pp 323-333. March. http://doi.org/10.1016/j.measurement.2015.12.032. ISSN: 0263-2241. (in 2016 – JCR Impact factor 2.359 – ENGINEERING, MULTIDISCIPLINARY, 19th of 85 / INSTRUMENTS & INSTRUMENTATION, 15th of 58 journals)

[58] Gonzalez Cuadrado D., Lavagnoli S., Paniagua G., 2016, “Methodology to correct the magnetic field effect on thin film measurements”. Journal of Engineering for Gas Turbines and Power. Vol. 138, Issue 3, 031602, pp 1-8. March. http://doi.org/10.1115/1.4031321. ISSN: 0742-4795. (in 2016 – JCR Impact factor 1.534 – ENGINEERING, MECHANICAL, 58th of 130 journals)

[57] Lavagnoli S., De Maesschalck C., Paniagua G., 2015, “Analysis of the heat transfer driving parameters in tight rotor blade tip clearances”. Journal of Heat Transfer. Vol. 138, Issue 1, pp 1-11. August. http://doi.org/10.1115/1.4031131. ISSN: 0022-1481. (in 2015 – JCR Impact factor 1.723 – ENGINEERING, MECHANICAL, 36th of 132 / THERMODYNAMICS, 24th of 58 journals)

[56] Sousa J., Paniagua G., 2015, “Entropy minimization design approach of supersonic internal passages”. Entropy. Vol. 17, Issue 8, pp 5593-5610. July. http://doi.org/10.3390/e17085593. ISSN: 1099-4300. (in 2015 – JCR Impact factor 1.743 – PHYSICS, MULTIDISCIPLINARY, 25th of 79 journals)

[55] Bianchi G., Saracoglu B.H., Paniagua G., Regert T., 2015, “Experimental analysis on the effects of DC arc discharge at various flow regimes”. Physics of fluids. Vol. 27, 036102, (14 pages). March. http://doi.org/10.1063/1.4914868. ISSN: 1070-6631. (in 2015 – JCR Impact factor 2.017 – MECHANICS, 35th of 135 / PHYSICS, FLUIDS & PLASMAS, 13th of 30 journals)

[54] Lavagnoli S., De Maesschalck C., Paniagua G., 2015, “Uncertainty analysis of adiabatic wall temperature measurements in turbine experiments”. Applied Thermal Engineering. Vol. 82, pp 170-181. March. http://doi.org/10.1016/j.applthermaleng.2015.02.048. ISSN: 1359-4311. (in 2015 – JCR Impact factor 3.043 – ENERGY & FUELS, 30th of 88 / ENGINEERING, MECHANICAL, 7th of 132 / MECHANICS, 7th of 135 / THERMODYNAMICS, 6th of 58 journals)

[53] Villafañe L., Paniagua G., Bonfanti G., Yasa T., 2015, “Local surface shear stress measurements from oil streaks thinning rate”. Sensors and actuators A: Physical. Vol. 223, pp 31-39. March. https://doi.org/10.1016/j.sna.2014.12.013. ISSN: 0924-4247. (in 2015 – JCR Impact factor 2.201 – ENGINEERING, ELECTRICAL & ELECTRONIC, 58th of 255 / INSTRUMENTS & INSTRUMENTATION, 10th of 56 journals)

[52] Bottini H., Paniagua G., Schreivogel P., Sonda A., de las Heras S., 2015, “Design and qualification of a supersonic wind tunnel for boundary layer transition research”. Journal of Aerospace Engineering. Vol. 229 (3), pp 562-578. March. https://doi.org/10.1177/0954410014537612. ISSN: 0954-4100. (in 2015 – JCR Impact factor 0.653 – ENGINEERING, AEROSPACE, 17th of 30 / ENGINEERING, MECHANICAL, 103rd of 132 journals)

[51] De Maesschalck C., Lavagnoli S., Paniagua G., 2015, “Blade tip carving effects on the aero-thermal performance of a transonic turbine”. Journal of Turbomachinery. Vol. 137, Issue 2, 021005, pp 1-10. February. https://doi.org/10.1115/1.4028326. ISSN: 0889-504X. (in 2015 – JCR Impact factor 0.661 – ENGINEERING, MECHANICAL, 102nd of 132 journals)

[50] Puente R., Paniagua G., Verstraete T., 2015, “Design trade-off study between efficiency and rotor forcing attenuation in a transonic turbine stage”. Applied Mathematical Modelling. Vol. 39, Issue 2, pp 838-850. January. https://doi.org/10.1016/j.apm.2014.07.003. ISSN: 0307-904X. (in 2015 – JCR Impact factor 2.291 – ENGINEERING, MULTIDISCIPLINARY, 12th of 85 / MATHEMATICS, INTERDISCIPLINARY APPLICATIONS, 13th of 101 / MECHANICS, 22nd of 135 journals)

[49] Paniagua G., Iorio M.C., Vinha N., Sousa J., 2014, “Design and analysis of pioneering high supersonic axial turbines”. International Journal of Mechanical Sciences. Vol. 89, pp 65-77. September. https://doi.org/10.1016/j.ijmecsci.2014.08.014. ISSN: 0020-7403. (in 2014 – JCR Impact factor 2.034 – ENGINEERING, MECHANICAL, 18th of 130 / MECHANICS, 24th of 137 journals)

[48] Tomasoni F., Saracoglu B., Paniagua G., 2014, “A decision-making algorithm for automatic flow pattern identification in high-speed imaging”. Expert Systems with Applications. Vol. 41, Issue 8, pp 3935-3943. June. http://doi.org/10.1016/j.eswa.2013.12.015. ISSN: 0957-4174. (in 2014 – JCR Impact factor 2.240 – COMPUTER SCIENCE, ARTIFICIAL INTELLIGENCE 29th of 123 / ENGINEERING, ELECTRICAL & ELECTRONIC, 48th of 249 / OPERATIONS RESEARCH & MANAGEMENT SCIENCE, 12th of 81 journals)

[47] Fernandez Villace V., Paniagua G., Steelant J., 2014, “Installed performance evaluation of an air turbo-rocket expander engine”. Aerospace science and technology. Vol. 35, pp 63-79. May. http://doi.org/10.1016/j.ast.2014.03.005. ISSN: 1270-9638. (in 2014 – JCR Impact factor 0.940 – ENGINEERING, AEROSPACE, 9th of 30 journals)

[46] Joly M., Verstraete T., Paniagua G., 2014, “Integrated multifidelity, multidisciplinary evolutionary design optimization of counterrotating compressors”. Integrated computer aided engineering. Vol. 21, Number 3, pp. 249-261. April. http://doi.org/10.3233/ICA-140463. ISSN: 1069-2509. (in 2014 – JCR Impact factor 4.698 – COMPUTER SCIENCE, ARTIFICIAL INTELLIGENCE 5th of 123 / COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 2nd of 102 / ENGINEERING, MULTIDISCIPLINARY, 1st of 83 journals)

[45] De Maesschalck C., Lavagnoli S., Paniagua G., Vinha N., 2014, “Aerothermodynamics of tight rotor tip clearance flows in high-speed unshrouded turbines”. Applied Thermal Engineering. Vol. 65, Issues 1-2, pp 343-351. April. http://doi.org/10.1016/j.applthermaleng.2014.01.015. ISSN: 1359-4311. (in 2014 – JCR Impact factor 2.739 – ENERGY & FUELS, 33rd of 88 / ENGINEERING, MECHANICAL, 8th of 130 / MECHANICS, 10th of 137 / THERMODYNAMICS, 6th of 55 journals)

[44] De Maesschalck C., Lavagnoli S., Paniagua G., 2014, “Blade Tip Shape Optimization for Enhanced Turbine Aerothermal Performance”. Journal of Turbomachinery. Vol. 136, Issue 4, 041016, pp 1-11. April. http://doi.org/10.1115/1.4025202. ISSN: 0889-504X (2nd Place EREA Best paper award on evolutionary research in 2013). (in 2014 – JCR Impact factor 0.930 – ENGINEERING, MECHANICAL, 68th of 130 journals)

[43] Sousa J., Villafañe L., Paniagua G., 2014, “Thermal analysis and modeling of surface heat exchangers operating in the transonic regime”. Energy. Vol. 64, pp 961-969. January. http://doi.org/10.1016/j.energy.2013.11.032. ISSN: 0360-5442. (in 2014 – JCR Impact factor 4.844 – ENERGY AND FUELS, 12th of 88 / THERMODYNAMICS, 2nd of 55 journals)

[42] Saracoglu B.H., Paniagua G., Sanchez J., Rambaud P., 2013, “Effects of blunt trailing edge flow discharge in supersonic regime”. Computers and Fluids. Vol. 88, pp 200-209. December. http://doi.org/10.1016/j.compfluid.2013.09.013. ISSN: 0045-7930. (in 2013 – JCR Impact factor 1.532 – COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 46th of 102 / MECHANICS, 50th of 138 journals)

[41] Rodriguez Miranda I., Fernandez Villace V., Paniagua G., 2013, “Modeling, Analysis and Optimization of the Air Turbo Rocket Expander Engine”. Journal of Propulsion and Power. Vol. 29, Issue 6, pp 1266-1273. November. http://doi.org/10.2514/1.B34781. ISSN: 0748-4658. (in 2013 – JCR Impact factor 0.612 – ENGINEERING, AEROSPACE, 14th of 27 journals)

[40] Joly M., Verstraete T., Paniagua G., 2013, “Multidisciplinary design optimization of a compact highly-loaded fan”. Structural and Multidisciplinary Optimization. Vol. 49, pp 471-483. August. http://doi.org/10.1007/s00158-013-0987-5. ISSN: 1615-147X. (in 2013 – JCR Impact factor 1.696 – COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 34th of 102 / ENGINEERING, MULTIDISCIPLINARY, 18th of 87 / MECHANICS, 42nd of 138 journals)

[39] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B.H., 2013, “Pulsating Coolant Ejection Effects Downstream of a Supersonic Trailing Edge”. Engineering Applications of Computational Fluid Mechanics. Vol. 7, No. 2, pp 250-260. June. http://dx.doi.org/10.1080/19942060.2013.11015468. ISSN: 1994-2060. (in 2013 – JCR Impact factor 0.921 – ENGINEERING, MECHANICAL, 61st of 126 / ENGINEERING, MULTIDISCIPLINARY, 46th of 87 / MECHANICS, 84th of 138 journals)

[38] Paniagua G., Lavagnoli S., Verstraete T., Mahmoudi W., Benamara T., 2013, “Aerodesign of a Transonic Contra-rotating turbine to drive the LOX and LH2 turbopumps in an expander cycle”. International Journal of Numerical Methods for Heat and Fluid Flow. Vol. 23, Issue 4. pp 575 – 587. May. http://doi.org/10.1108/09615531311323746. ISSN: 0961-5539. (in 2013 – JCR Impact factor 0.919 – MATHEMATICS, INTERDISCIPLINARY APPLICATIONS, 59th of 95 / MECHANICS, 85th of 138 / THERMODYNAMICS, 30th of 55 journals)

[37] Lavagnoli S., Paniagua G., De Maesschalck C., Yasa T., 2013, “Analysis of the Unsteady Overtip Casing Heat Transfer in a High Speed Turbine”. Journal of Turbomachinery. Vol. 135, Issue 3, 031027, pp 1-12. May. http://doi.org/10.1115/1.4007509. ISSN: 0889-504X. (in 2013 – JCR Impact factor 1.003 – ENGINEERING, MECHANICAL, 57th of 126 journals)

[36] Joly M., Verstraete T., Paniagua G., 2013, “Differential evolution based soft optimization to attenuate vane-rotor shock interaction in high-pressure turbines”. Applied Soft Computing. Vol. 13, Issue 4, pp 1882-1891. April. http://doi.org/10.1016/j.asoc.2012.12.005. ISSN: 1568-4946. (in 2013 – JCR Impact factor 2.679 – COMPUTER SCIENCE, ARTIFICIAL INTELLIGENCE, 20th of 121 / COMPUTER SCIENCE, INTERDISCIPLINARY APPLICATIONS, 14th of 102 journals)

[35] Fernandez Villace V., Paniagua G., 2013, “On the exergetic effectiveness of combined-cycle engines for high speed propulsion”. Energy. Vol. 51, pp 382-394. March https://doi.org/10.1016/j.energy.2012.11.051. ISSN: 0360-5442. (in 2013- JCR Impact factor 4.159 – ENERGY AND FUELS, 13th of 82 / THERMODYNAMICS, 2nd of 55 journals)

[34] Villafañe L., Paniagua G., 2013, “Aero-thermal Analysis of Shielded Fine Wire Thermocouples”. International Journal of Thermal Sciences. Vol. 65, pp 214 – 223. March. https://doi.org/10.1016/j.ijthermalsci.2012.10.025. ISSN: 1290-0729. (in 2013- JCR Impact factor 2.563 –ENGINEERING, MECHANICAL, 11th of 126 / THERMODYNAMICS, 7th of 55th journals)

[33] Fernandez Villace V., Paniagua G., 2013, “Numerical model of a Variable-Combined-Cycle Engine for Dual Subsonic and Supersonic Cruise”. Energies. Vol. 6, Issue 2, pp 839-870. February. https://doi.org/10.3390/en6020839. ISSN: 1996-1073. (in 2013- JCR Impact factor 1.602 – ENERGY AND FUELS, 43th of 82 journals)

[32] Sousa J., Lavagnoli S., Paniagua G., Villafañe L., 2012, “Three Dimensional Inverse Heat Flux Evaluation Based on Infrared Thermography”. Quantitative InfraRed Thermography Journal. Vol. 9, Issue 2, pp 177-191. December. https://doi.org/10.1080/17686733.2012.743697. ISSN: 1768-6733. (in 2012 – JCR Impact factor 0.344 – INSTRUMENTS & INSTRUMENTATION, 47th of 57 / MATERIALS SCIENCE, CHARACTERIZATION & TESTING, 26th of 32 / PHYSICS, APPLIED, 121st of 127 journals)

[31] Saracoglu B.H., Paniagua G., Salvadori S., Tomasoni F., Duni S., Yasa T., Miranda A., 2012, “Trailing edge shock modulation by pulsating coolant ejection”. Applied Thermal Engineering. Vol. 48, pp 1-10. December. http://doi.org/10.1016/j.applthermaleng.2012.04.036. ISSN: 1359-4311. 2nd Place EREA Best paper award on evolutionary research in 2012. (in 2012 – JCR Impact factor 2.127 – ENERGY & FUELS, 34th of 81 / ENGINEERING, MECHANICAL, 12th of 125 / MECHANICS, 16th of 134 / THERMODYNAMICS, 11th of 54th journals)

[30] Pinilla V., Solano J.P., Paniagua G., Anthony R., 2012, “Adiabatic wall temperature evaluation in a high speed turbine”. Journal of Heat Transfer. Vol. 134, Issue 9, 091601, pp 1-9. September. http://doi.org/10.1115/1.4006313. ISSN: 0022-1481. (in 2012 – JCR Impact factor 1.718 – ENGINEERING, MECHANICAL, 20th of 125 / THERMODYNAMICS, 16th of 54 journals)

[29] Yasa T., Paniagua G., 2012, “Robust Procedure For Multi-Hole Probe Data Processing”. Flow Measurement and Instrumentation. Vol. 26, pp 46-54. August. http://doi.org/10.1016/j.flowmeasinst.2012.03.004. ISSN: 0955-5986. (in 2012 – JCR Impact factor 0.971 – ENGINEERING, MECHANICAL, 45th of 125 / INSTRUMENTS AND INSTRUMENTATION, 36th of 57 journals)

[28] Povey T., Paniagua G, 2012, “Method to Improve Precision of Rotating Inertia and Friction Measurements”. Journal Mechanical Systems and Signal Processing. Vol. 30, pp 323-329. July. http://doi.org/10.1016/j.ymssp.2012.01.025. ISSN: 0888-3270. (in 2012 – JCR Impact factor 1.913 – ENGINEERING, MECHANICAL, 16th of 125 journals)

[27] Schreivogel P., Paniagua G., Bottini H., 2012, “Pressure sensitive paint techniques for surface pressure measurements in supersonic flows”. Experimental Thermal and Fluid Science. Vol. 39, pp 189-197. May. http://doi.org/10.1016/j.expthermflusci.2012.01.023. ISSN: 0894-1777. (in 2012 – JCR Impact factor 1.595 – ENGINEERING, MECHANICAL, 24th of 125 / PHYSICS, FLUIDS & PLASMAS, 16th of 31 / THERMODYNAMICS, 17th of 54 journals)

[26] Lavagnoli S., Paniagua G., Tulkens M., Steiner A., 2012, “High Fidelity Rotor Gap Measurements in a Short-Duration Turbine Rig”. Journal Mechanical Systems and Signal Processing. Vol. 27, pp 590-603. February. http://doi.org/10.1016/j.ymssp.2011.09.008. ISSN: 0888-3270. (in 2012 – JCR Impact factor 1.913 – ENGINEERING, MECHANICAL, 16th of 125 journals)

[25] Lavagnoli S., Yasa T., Paniagua G., Castillon L., Duni S., 2012, “Aerodynamic Analysis of an Innovative Low Pressure Vane Placed in an s-Shape Duct”. Journal of Turbomachinery. Vol. 134, Issue 1, 011013, pp 1-13. January. http://doi.org/10.1115/1.4003241. ISSN: 0889-504X. (in 2012 – JCR Impact factor 0.768 – ENGINEERING, MECHANICAL, 64th of 125 journals)

[24] Yasa T., Lavagnoli S., Paniagua G., 2011, “Impact of a Multi-Splitter Vane Configuration on the Losses in a 1.5 Turbine Stage”. Journal of Power and Energy. Part A. Vol. 225, Issue 7, pp 964-974. November. http://doi.org/10.1177/0957650911409843. ISSN: 0957-6509. (in 2011 – JCR Impact factor 0.700 – ENGINEERING, MECHANICAL, 68th of 121 journals)

[23] Solano J.P., Pinilla V., Paniagua G., Lavagnoli S., Yasa T., 2011, “Aero-thermal investigation of a multi-splitter axial turbine”. International Journal of Heat and Fluid Flow. Vol. 32, Issue 5, pp 1036-1046. October. http://doi.org/10.1016/j.ijheatfluidflow.2011.05.011. ISSN: 0142-727X. 2nd Place EREA Best paper award on evolutionary research in 2011. (in 2011 – JCR Impact factor 1.927 – ENGINEERING, MECHANICAL, 12th of 121 / MECHANICS, 21rd of 132 / THERMODYNAMICS, 13th of 52 journals)

[22] Villafañe L., Paniagua G., Kaya M., Bajusz D., Hiernaux S., 2011, “Development of a transonic wind tunnel to investigate engine bypass flow heat exchangers”. Journal of Aerospace Engineering. Vol. 225, Issue 8, pp 902-914. August. http://doi.org/10.1177/0954410011400127. ISSN: 0954-4100. (in 2011 – JCR Impact factor 0.488 – ENGINEERING, AEROSPACE 16th of 26 / ENGINEERING, MECHANICAL 83rd of 121 journals)

[21] Delhaye D., Paniagua G., Fernandez Oro J., Dénos R., 2011, “Enhanced performance of fast-response 3-hole wedge probes for transonic flows in axial turbomachinery”. Experiments in Fluids. Vol. 50, No. 1, pp 163-177. January. http://doi.org/10.1007/s00348-010-0908-y. ISSN: 0723-4864. 2nd Place EREA Best paper award on evolutionary research in 2010. (in 2011 – JCR Impact factor 1.735 – ENGINEERING, MECHANICAL, 18th of 121 / MECHANICS, 28th of 132 journals)

[20] Pau M., Paniagua G., 2010, “Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane with Rim Seal Cavity Flow Ejection”. Journal of Fluids Engineering. Vol. 132, Issue 11, 111101, pp 1-9. November. http://doi.org/10.1115/1.4002887. ISSN: 0098-2202. (in 2010 – JCR Impact factor 0.440 – ENGINEERING, MECHANICAL, 83rd of 122 journals)

[19] Pau M., Paniagua G., Delhaye D., de la Loma A., Ginibre P., 2010, “Aerothermal impact of stator-rim purge flow and rotor-platform film cooling on a transonic turbine stage”. Journal of Turbomachinery. Vol. 132, No. 2, 021006, pp 1-12. April. http://doi.org/10.1115/1.3142859. ISSN: 0889-504X. (2nd Place EREA Best paper award on evolutionary research in 2009). (in 2010 – JCR Impact factor 0.345 – ENGINEERING, MECHANICAL, 97th of 122 journals)

[18] Solano J.P., Paniagua G., 2009, “Novel Two-Dimensional Transient Heat Conduction Calculation in a Cooled Rotor: Ventilation Preheating – Blow-Down Flux”. Journal of Heat Transfer. Vol. 131, No. 8, 081601, pp 1-9. August. https://doi.org/10.1115/1.3122777. ISSN: 0022-1481. Best Paper Award in Heat Transfer at the ASME Turbo Expo. (in 2009 – JCR Impact factor 0.959 – ENGINEERING, MECHANICAL, 37th of 116 / THERMODYNAMICS, 27th of 49 journals)

[17] Varvill R., Paniagua G., Kato H., Thatcher M., 2009, “Design and Testing of the Contra-Rotating Turbine for the Scimitar Precooled Mach 5 Cruise Engine”. Journal of the British Interplanetary Society. Vol. 62, Issue 6, pp 225-234. June. ISSN: 0007-084X. (in 2009 – JCR Impact factor 0.526 – ASTRONOMY & ASTROPHYSICS 44th of 53 / ENGINEERING, AEROSPACE, 13th of 27 / GEOSCIENCES, MULTIDISCIPLINARY, 137th of 155 journals)

[16] Paniagua G., Szokol S., Kato H., Manzini G., Varvill R., 2008, “Contra-rotating turbine aero-design for an advanced hypersonic propulsion system”. Journal of Propulsion and Power. Vol. 24, No. 6, pp 1269-1277. November – December. https://doi.org/10.2514/1.35612. ISSN: 0748-4658. (in 2008 – JCR Impact factor 0.891 – ENGINEERING, AEROSPACE, 7th of 25 journals)

[15] Van den Braembussche R., Brouckaert J.F., Paniagua G., Briottet L, 2008, “Design and optimization of a multistage turbine for a helium cooled reactor”. Journal of Nuclear Engineering and Design, Special Issue on HTR 2006. Vol. 238, No. 11, pp 3136-3144. November. https://doi.org/10.1016/j.nucengdes.2008.01.024 . ISSN: 0029-5493. (in 2008 – JCR Impact factor 0.874 – NUCLEAR SCIENCE & TECHNOLOGY, 13rd of 30 journals)

[14] Paniagua G., Yasa T., de la Loma A., Castillon L., Coton T., 2008, “Unsteady strong shocks interactions in a transonic turbine: Experimental and numerical analysis”. Journal of Propulsion and Power. Vol. 24, No. 4, pp 722-731. July – August. https://doi.org/10.2514/1.34774. ISSN: 0748-4658. (in 2008 – JCR Impact factor 0.891 – ENGINEERING, AEROSPACE, 7th of 25 journals)

[13] De la Loma A., Paniagua G., Verrastro D., Adami P., 2008, “Transonic turbine stage heat transfer investigation in presence of strong shocks”. Journal of Turbomachinery. Vol. 130, No. 3, 031019, pp 1-8. July. https://doi.org/10.1115/1.2777193. ISSN: 0889-504X. (in 2008 – JCR Impact factor 1.297 – ENGINEERING, MECHANICAL, 29th of 105 journals)

[12] Billiard N., Paniagua G., Dénos R., 2008, “Impact of clocking on the aero-thermodynamics of a second stator tested in a one and a half stage HP turbine”. Journal of Thermal Science. Vol. 17, No. 2, pp 97-110. April-June. https://doi.org/10.1007/s11630-008-0097-7. ISSN: 1003-2169. (in 2009 – JCR Impact factor 0.165 – ENGINEERING, MECHANICAL, 107th of 116 / THERMODYNAMICS, 47th of 49 journals)

[11] Pau, M., De La Loma, A., Paniagua, G. and Delhaye, D., 2008, “Film Cooling and Hub Disk Leakage Flow Experiments in a Fully Rotating HP Turbine Stage”. WSEAS Transactions on Fluid Mechanics. Volume 3, Issue 1, pp 56-67. January. http://www.wseas.us/e-library/transactions/fluid/2008/25-586N.pdf. ISSN: 1790-5087.

[10] Paniagua G., and Yasa T., 2007, “Accurate turbine inertia measurement”. Journal Experimental Mechanics. Vol. 47, No. 5, pp 693-700. October. https://doi.org/10.1007/s11340-006-9031-7. ISSN: 0014-4851. (in 2007 – JCR Impact factor 0.985 – MATERIALS SCIENCE, MULTIDISCIPLINARY, 95th of 189 / MECHANICS, 44th of 112 / MATERIALS SCIENCE, CHARACTERIZATION & TESTING, 5th of 29 journals)

[9] Yasa T., Paniagua G., Bussolin A., 2007, “Performance analysis of a transonic high pressure turbine”. Journal of Power and Energy. Part A. Vol. 221, No. 6, pp 769-778. September. https://doi.org/10.1243/09576509JPE467. ISSN: 0957-6509. (in 2007 – JCR Impact factor 0.201 – ENGINEERING, MECHANICAL, 88th of 107 journals)

[8] Paniagua G., Persico G., Billiard N., Dénos R., 2007, “Modulation of the rotor-stator interactions due to clocking”. International Review of Mechanical Engineering. Vol. 1, No. 3, pp 293-303. May. ISSN: 1970-8734. Indexed in: Cambridge Scientific Abstracts (CSA/CIG), Academic Search Complete (EBSCO), Elsevier Bibliographic Database (SCOPUS)

[7] Yasa T., Paniagua G., Dénos R., 2007, “Application of hot-wire anemometry in a blow-down turbine facility”. Journal of Engineering for Gas Turbines and Power. Vol. 129, No. 2, pp 420-427. April. https://doi.org/10.1115/1.2364191. ISSN: 0742-4795. (in 2007 – JCR Impact factor 0.355 – ENGINEERING, MECHANICAL, 72nd of 107 journals)

[6] Dénos R. and Paniagua G., 2005, “Effect of vane-rotor interaction on the unsteady flowfield downstream of a transonic HP turbine”. Journal of Power and Energy. Part A. Vol. 219, No. 6, pp 431-442. September. https://doi.org/10.1243/095765005X31180. ISSN: 0957-6509. (in 2005 – JCR Impact factor 0.325 – ENGINEERING, MECHANICAL, 73th of 104 journals)

[5] Paniagua G., Dénos R., Almeida S., 2004, “Effect of hub endwall cavity flow ejection on the flowfield of a transonic high pressure turbine”. Journal of Turbomachinery. Vol. 126, No. 4, pp 578-586. October. https://doi.org/10.1115/1.1791644. ISSN: 0889-504X. (in 2004 – JCR Impact factor 0.435 – ENGINEERING, MECHANICAL, 57th of 103 journals)

[4] Paniagua G., Dénos R., 2002, “Digital compensation of pressure sensors in the time domain”. Experiments in Fluids. Vol. 32, No. 4, pp 417-424. April. https://doi.org/10.1007/s003480100355. ISSN: 0723-4864. (in 2002 – JCR Impact factor 0.923 – ENGINEERING, MECHANICAL, 15th of 102 / MECHANICS, 27th of 102 journals)

[3] Paniagua G., Dénos R., Arts T., 2001, “Steady-unsteady measurements of the flow field downstream of a transonic HP turbine stage”. Journal of Power and Energy. Vol. 215, No. A6, pp 663-673. September. https://doi.org/10.1243/0957650011538974 . ISSN: 0957-6509. (in 2001 – JCR Impact factor 0.232 – ENGINEERING, MECHANICAL, 76th of 102 journals)

[2] Dénos R., Arts T., Paniagua G., Michelassi V., Martelli F., 2001, “Investigation of the unsteady rotor aerodynamics in a transonic turbine stage”. Journal of Turbomachinery. Vol. 123, No. 1, pp 81-89. January. https://doi.org/10.1115/1.1314607 . ISSN: 0889-504X. (in 2001 – JCR Impact factor 1.028 – ENGINEERING, MECHANICAL, 13th of 102 journals)

[1] Dénos R., Sieverding C.H., Arts T., Brouckaert J.F., Paniagua G., Michelassi V., 1999, “Experimental investigation of the unsteady rotor aerodynamics of a transonic turbine stage”. Journal of Power and Energy. Vol. 213, No. A4, pp 327-338. June. https://doi.org/10.1243/0957650991537653 . ISSN: 0957-6509. (in 1999 – JCR Impact factor 0.216 – ENGINEERING, MECHANICAL, 71st of 98 journals)

Fully Reviewed Conference Papers (102):

[102] Bury C., Vesely L., Andress W., Paniagua G., Otto M., Kapat J., 2024, “sCO2 Cycle Selection for Waste Heat Recovery From Aircraft Engine”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-129456. London, UK. June. https://doi.org/10.1115/GT2024-129456.

[101] Andress W., Paniagua G., Vesely L., Otto M., Kapat J., 2024, “Analysis of NH3 Powered Turbofan Engine With sCO2 Waste Heat Recovery System”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-126643. London, UK. June. https://doi.org/10.1115/GT2024-126643.

[100] McKelvy A., Braun J., Paniagua G., Choquet E., Andre T., Falempin F., 2024, “A Modal Analysis of Spray Structures From a Transversely Injected Liquid Jet in Subsonic and Supersonic Crossflows”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-125052. London, UK. June. https://doi.org/10.1115/GT2024-125052.

[99] Lasala I., McKelvy A., Braun J., Paniagua G., Choquet E., Andre T., Falempin F., 2024, “Numerical Assessment of an Aerodynamic Probe to Enable Short Focal Length Laser Diagnostics in High Temperature Supersonic Flows Based on Flow Disturbance”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-129207. London, UK. June. https://doi.org/10.1115/GT2024-129207.

[98] Pal P., Paniagua G., Braun J., Meyer T., Athmanathan V., 2024, “Numerical Study of Flow and Combustion Dynamics in a Hydrogen-Air Rotating Detonation Combustor-Stator Integrated System”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-129058. London, UK. June. https://doi.org/10.1115/GT2024-129058.

[97] Castillo A., Bhatnagar L., Inhestern L., Paniagua G., 2024, “Comprehensive Experimental Assessment of Unsteady Pressure and Heat Flux in a Small-Core Turbine Over-Tip Shroud”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-124106. London, UK. June. https://doi.org/10.1115/GT2024-124106.

[96] Inhestern L., Peitsch D., Paniagua G., 2024, “Heat Flux Effect on the Turbine Work Extraction With Overtip Leakage Flows”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-126598. London, UK. June. https://doi.org/10.1115/GT2024-126598.

[95] Bhatnagar L., Castillo A., Sanchez de la Rosa D., Paniagua G., Clemens E., Bloxham M., 2024, “The Purdue High-Speed Small Core Turbine Facility”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-129316. London, UK. June. https://doi.org/10.1115/GT2024-129316.

[94] Fridh, J., Hammer S., Twaddle J., Paniagua G., 2024, “Acoustic Modes in an Open Box Cavity With Variable Depth Using Two Distinct Wind Tunnels”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-129059. London, UK. June. https://doi.org/10.1115/GT2024-129059.

[93] Sanchez de la Rosa D., Paniagua G., 2024, “Enhancing Total Temperature Measurement Accuracy: Calibration Procedures and Novel Two-Wire Probes”. Proceedings of the ASME Turbo Expo 2024. Paper GT2024-126636. London, UK. June. https://doi.org/10.1115/GT2024-126636. Best paper award from the Controls, Diagnostics & Instrumentation Committee.

[92] Tuite L., Rebassa A., Bean S., Paniagua G., 2024, “Blade and Rim Seal Design of a First Stage High-Pressure Turbine for a 300MW Supercritical CO2 Power Cycle”. Proceedings of the 8th International CO2 Power Cycles Symposium. Paper 102. San Antonio, USA. February. Best Paper Award.

[91] Bhatnagar L., Paniagua G., Clemens E., Bloxham M., 2023, “A Probabilistic Approach to Turbine Efficiency”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103860. Boston, USA. June. https://doi.org/10.1115/GT2023-103860.

[90] Grasa S., Paniagua G., 2023, “Design, multi-point optimization and analysis of diffusive stator vanes to enable turbine integration into rotating detonation engines”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101726. Boston, USA. June. https://doi.org/10.1115/GT2023-101726.

[89] Moore J.J., Neveu J., Bensmiller J., Replogle C., Fetvedt J., Cormier I., Kapat J., Fernandez E., Paniagua G., 2023, “Development of a 300 Mwe Utility Scale Oxy-Fuel Sco2 Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103328. Boston, USA. June. https://doi.org/10.1115/GT2023-103328.

[88] Nares Alcala R., Bhatnagar L., Paniagua G., 2023, “Development of a Conduction-Free Total Temperature Probe Based on the Two-Wire Concept”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-102306. Boston, USA. June. https://doi.org/10.1115/GT2023-102306.

[87] Clark J., Cukurel B., Paniagua G., 2023, “On the Development of High Lift, High Work Low-Pressure Turbines”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-103164. Boston, USA. June. https://doi.org/10.1115/GT2023-103164.

[86] Tuite L., Braun J., Paniagua G., 2023, “Optimization of an HPT Blade and Sector-Based Annular Rig Design for Supercritical Co2 Power Cycle Representative Testing”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101722. Boston, USA. June. https://doi.org/10.1115/GT2023-101722.

[85] McKelvy A., Braun J., Paniagua G., Andre T., Choquet E., Falempin F., 2023, “Quantitative Definition of Spray Edge With Extinction Diagnostics for Liquid Jets in Supersonic Crossflow”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-102536. Boston, USA. June. https://doi.org/10.1115/GT2023-102536. Best paper award from the Controls, Diagnostics & Instrumentation Committee.

[84] Castillo A., Paniagua G., 2023, “Robust Tip Gap Measurements: A Universal In-Situ Dynamic Calibration, Demonstration in a Two-Stage High Speed Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101223. Boston, USA. June. https://doi.org/10.1115/GT2023-101223.

[83] Saavedra J., Lozano F., Paniagua G., 2023, “Transient Heat Flux Budgeting on a High-Pressure Turbine”. Proceedings of the ASME Turbo Expo 2023. Paper GT2023-101446. Boston, USA. June. https://doi.org/10.1115/GT2023-101446.

[82] Grasa S., Paniagua G., 2023, “Design and characterization of highly diffusive turbine vanes suitable for transonic rotating detonation combustors”. Proceedings of the 15th European Conference on Turbomachinery. Budapest, Hungary. March.

[81] Tuite L., Straub D., Paniagua G., 2023, “Development of a large-scale open geometry for squaler tip coolant injection research”. Proceedings of the 15th European Conference on Turbomachinery. Budapest, Hungary. March.

[80] Kasahara J., Nakata K., Ishihara K., Goto K., Ituoyama N., Watanabe H., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2022, “Experimental investigation of inner flow of a throat less diverging rotating detonation engine”. 39th International Symposium on Combustion. Paper PROCI-D-22-00174. Vancouver, Canada.

[79] Nowak H., Lluesma-Rodriguez F., Rahbari I., Clark J., Paniagua G., 2022, “Response of separated boundary layers to steady and pulsated flow injection in transonic internal flows”. Proceedings of the ASME Turbo Expo 2022. Paper GT2022-83152. Rotterdam, The Netherlands. June. https://doi.org/10.1115/GT2022-83152.

[78] Rahbari I., Butzen M., Twaddle J., Paniagua G., 2022, “Development of a test article for acoustic streaming in high-speed flow”. Proceedings of the ASME Turbo Expo 2022. Paper GT2022-82344. Rotterdam, The Netherlands. June. https://doi.org/10.1115/GT2022-82344.

[77] Braun J., Paniagua G., Ferguson D., 2021, “Rotating Detonation Combustor Downstream transition Passage Design Considerations”. Proceedings of the Active Flow Control Conference. Berlin, Germany. September.

[76] Obenauf D., Braun J., Meyer T.R., Paniagua G., Sojka P.E., Falempin F., 2021, “Characterization of the steady and unsteady spray structures of a liquid jet in supersonic crossflow”. Proceedings of the 15th Triennial International Conference on Liquid Atomization and Spray Systems. ICLASS 2021. Vol. 1, No. 1. Edinburgh, UK, August.

[75] Braun J., Paniagua G., Ferguson D., 2021, “Aero-thermal characterization of accelerating and diffusing passages downstream of rotating detonation combustors”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59111. Pittsburgh, USA. June. https://doi.org/10.1115/GT2021-59111.

[74] Bhatnagar L., Paniagua G., Gonzalez-Cuadrado D., Aye-Addo P.A.N., Castillo A., Lozano F., Bloxham M., 2021, “Uncertainty in high-pressure stator performance measurement in an annular cascade at engine-representative Reynolds and Mach”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59702. Pittsburgh, USA. June. https://doi.org/10.1115/GT2021-59702.

[73] Aye-Addo P.A.N., Paniagua G., Gonzalez-Cuadrado D., Bhatnagar L., Castillo A., Braun J., Gomez-Gomez M., Meyer T., Bloxham M., 2021, “Development of a lifetime pressure sensitive paint procedure for high-pressure vane testing”. Proceedings of the ASME Turbo Expo 2021. Paper GT2021-59886. Pittsburgh, USA. June. https://doi.org/10.1115/GT2021-59886.

[72] Yokoo R., Goto K., Kasahara J., Athmanathan V., Braun J., Paniagua G., Meyer T., Kawasaki A., Matsuoka K., Matsuo A., Funaki I., 2021, “Experimental study of internal flow structures in cylindrical rotating detonation engines”. Proceedings of the 38th International Symposium on Combustion. PROCI-D-19-00206. Adelaide, Australia. January

[71] Braun J., Paniagua G., Falempin F., 2020, “Aero-thermal Optimization of Bladeless Turbines”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-15551. London, UK. September. https://doi.org/10.1115/GT2020-15551.

[70] Saavedra J., Athmanathan V., Paniagua G., Meyer T., Straub D., Black J., Ramesh S., 2020, “Scalable Heat Transfer Characterization on Film Cooled Geometries Based on Discrete Green´s Functions”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-16304. London, UK. September. https://doi.org/10.1115/GT2020-16304.

[69] Inman D., Gonzalez Cuadrado D., Andreoli V., Fisher J., Paniagua G., Aye-Addo A. N., Bhatnagar L., Lozano F., Meyer T., Bloxham M., 2020, “Particle Image Velocimetry in a High-Pressure Turbine Stage at Aerodynamically Engine Representative Conditions”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-15013. London, UK. September. https://doi.org/10.1115/GT2020-15013.

[68] Juangphanich P., Paniagua G., Shyam V., 2020, “Bio-inspired High-Pressure Turbine Optimization Strategy for Future Hybrid Electric Engines Operating at Off-design”. Proceedings of the ASME Turbo Expo 2020. Paper GT2020-15368. London, UK. September. https://doi.org/10.1115/GT2020-15368.

[67] De Maesschalck C., Andreoli V., Paniagua G., Gillen T., Barker B., 2019, “Aerothermal optimization of turbine squealer tip geometries with arbitrary cooling injection”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91280. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91208.

[66] Liu Z., Inhestern L.B., L.B., Braun J., Paniagua G., 2019, “Unsteady heat transfer assessment of supersonic turbines downstream of a rotating detonation combustor”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91460. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91460.

[65] Inhestern L.B., Braun J., Paniagua G., Serrano J.R., 2019, “Design, optimization and analysis of supersonic radial turbines”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91756. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91756.

[64] Gonzalez Cuadrado D., Lozano F., Paniagua G., 2019, “Experimental demonstration of inverse heat transfer methodologies for turbine applications”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91105. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91105

[63] Saavedra J., Paniagua G., 2019, “Transient performance of separated flows: Experimental characterization of flow detachment dynamics”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91020. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91020.

[62] Braun J., Paniagua G., Falempin F., Le Naour B., 2019, “Design and experimental assessment of bladeless turbines for axial inlet supersonic flows”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91047. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91047.

[61] Bhatnagar L., Paniagua G., 2019, “Development of high speed and high temperature atomic layer thermopiles”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91012. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91012.

[60] Agarwal T., Rahbari I., Saavedra J., Paniagua G., Cukurel B., 2019, “Multi-fidelity analysis of acoustic streaming in forced convection heat transfer”. Proceedings of the ASME Turbo Expo 2019. Paper GT2019-91548. Phoenix, USA. June. https://doi.org/10.1115/GT2019-91548.

[59] Krane P., Gonzalez Cuadrado D., Lozano F., Marconnet A, Paniagua G., 2019, “Identifying Hot Spots in Electronics Packages with a Sensitivity-Coefficient Based Inverse Heat Conduction Method”. Proceedings of the 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems ITherm. https://doi.org/10.1109/ITHERM.2019.8757292. Las Vegas, USA. May.

[58] Juangphanich P., Paniagua G., 2018, “Meander-like shape optimization of the stator rotor platform cavity”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-77167, pp. V05CT22A009; 12 pages. https://doi.org/10.1115/GT2018-77167. Oslo, Norway. June.

[57] Gonzalez Cuadrado D., Lozano F., Andreoli V., Paniagua G., 2018, “Engine scalable rotor casing convective heat flux evaluation using inverse heat transfer methods”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76906, pp. V006T05A028; 12 pages. https://doi.org/10.1115/GT2018-76906. Oslo, Norway. June.

[56] Saavedra J., Paniagua G., Chazot O., 2018, “Thermal boundary layer response to periodic fluctuations”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76896. https://doi.org/10.1115/GT2018-76896. Oslo, Norway. June.

[55] Liu Z., Braun J., Paniagua G., 2018, “Characterization of a supersonic turbine downstream of a rotating detonation combustor”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-76798, pp. V003T06A021 1-14. https://doi.org/10.1115/GT2018-76798.Oslo, Norway. June.

[54] Saavedra J., Paniagua G., 2018, “Transient performance of separated flows: Characterization and active flow control”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-75128. pp. V006T05A001 1-13. https://doi.org/10.1115/GT2018-75128. Oslo, Norway. June.

[53] Andreoli V., Braun J., Paniagua G., De Maesschalck C., Bloxham M., Cummings W., Langford L., 2018, “Aerothermal optimization of fully cooled turbine blade tips”. Proceedings of the ASME Turbo Expo 2018. Paper GT2018-75099. pp. 1-12. https://doi.org/10.1115/GT2018-75099. Oslo, Norway. June.

[52] Gonzalez Cuadrado D., Marconnet A., Paniagua G., 2017, “Inverse conduction heat transfer and Kriging interpolation applied to temperature sensor location in microchips”. Proceedings of the ASME Interpack 2017. https://doi.org/10.1115/IPACK2017-74224. San Francisco, USA. September. Outstanding Paper Award at the ASME InterPack Conference.

[51] Sousa J., Paniagua G., Collado E., 2017, “Analysis of the aerodynamic losses in a supersonic turbine”. Proceedings of the ASME PowerEnergy 2017. Paper ICOPE2017-3624. https://doi.org/10.1115/POWER-ICOPE2017-3624. Charlotte, USA. June.

[50] De Maesschalck C., Lavagnoli S., Paniagua G., 2017, “Integration of CFD to design experiments for enhanced spatial and temporal discretization”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64863. https://doi.org/10.1115/GT2017-64863. Charlotte, USA. June.

[49] Andreoli V., Gonzalez Cuadrado D., Paniagua G., 2017, “Prediction of the Turbine Tip Convective Heat Flux Using Discrete Green Functions”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64080. https://doi.org/10.1115/GT2017-64080. Charlotte, USA. June.

[48] Braun J., Lu S., Paniagua G., 2017, “Development of high frequency virtual thermocouples”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-64669. https://doi.org/10.1115/GT2017-64669. Charlotte, USA. June.

[47] Liu Z., Paniagua G., 2017, “Design of directional probes for high-frequency turbine measurements”. Proceedings of the ASME Turbo Expo 2017. Paper GT2017-65680. https://doi.org/10.1115/GT2017-64680. Charlotte, USA. June.

[46] Saavedra J., Paniagua G., Saracoglu B., 2016, “Experimental characterization of the vane heat flux under pulsating trailing-edge blowing”. Proceedings of the ASME Turbo Expo 2016. Paper GT2016-58100. https://doi.org/10.1115/GT2016-58100. ISBN: 978-0-7918-4982-8. Seoul, Korea. June.

[45] Paniagua G., Gonzalez Cuadrado D., Saavedra J., Andreoli V., Meyer T., Meyer S., Lawrence D., 2016, “Design of the Purdue Experimental Turbine Aerothermal Laboratory for Optical and Surface Aero-Thermal Measurements”. Proceedings of the ASME Turbo Expo 2016. Paper GT2016-58101. https://doi.org/10.1115/GT2016-58101. ISBN: 978-0-7918-4982-8. Seoul, Korea. June.

[44] Gonzalez Cuadrado D., Lavagnoli S., Paniagua G., 2015, “Methodology to correct the magnetic field effect on thin film measurements”. Proceedings of the ASME Turbo Expo 2015. Paper GT2015-42715. https://doi.org/10.1115/GT2015-42715. Montreal, Canada. June.

[43] De Maesschalck C., Lavagnoli S., Paniagua G., Verstraete T., Olive R., Picot P., 2015, “Heterogeneous Optimization Strategies for Carved and Squealer-like Turbine Blade Tips”. Proceedings of the ASME Turbo Expo 2015. Paper GT2015- 42983. https://doi.org/10.1115/GT2015-42983. Montreal, Canada. June. Nominated by the Heat Transfer Committee to Best Paper Award.

[42] Bottini H., Saracoglu B., Paniagua G., 2014, “Experimental investigation of single roughness element effects on supersonic boundary layer transition”. Proceedings of the ASME FEDSM2014. Paper FEDSM2014-21673. https://doi.org/10.1115/FEDSM2014-21673. ISBN: 978-0-7918-4623-0. Chicago, USA. July.

[41] Villafañe L., Paniagua G., 2014, “Experimental Investigation of Engine Bypass Flow Behavior in the Presence of Surface Heat Exchangers”. Proceedings of the ASME FEDSM2014. Paper FEDSM2014-21580. https://doi.org/10.1115/FEDSM2014-21580. ISBN: 978-0-7918-4622-3. Chicago, USA. July.

[40] Vinha N., Paniagua G., Sousa J., Saracoglu B., 2014, “Axial bladeless turbine suitable for high supersonic flows”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-27194. https://doi.org/10.1115/GT2014-27194. ISBN: 978-0-7918-4562-2. Dusseldorf, Germany. June.

[39] Saracoglu B., Paniagua G., Salvadori S., 2014, “Energy balance of pulsating coolant ejection”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-25868. https://doi.org/10.1115/GT2014-25868. ISBN: 978-0-7918-4563-9. Dusseldorf, Germany. June.

[38] Lavagnoli S., De Maesschalck C., Paniagua G., 2014, “Analysis of the Heat Transfer Driving Parameters in Tight Rotor Blade Tip Clearances”. Proceedings of the ASME Turbo Expo 2014. Paper GT2014-25291. https://doi.org/10.1115/GT2014-25291. ISBN: 978-0-7918-4572-1. Dusseldorf, Germany. June.

[37] De Maesschalck C., Lavagnoli S., Paniagua G., 2013, “Blade tip carving effects on the aero-thermal performance of a transonic turbine”. Proceedings of the ASME Turbine Blade Tip Symposium & Course Week. Paper TBTS2013-2028. https://doi.org/10.1115/TBTS2013-2028. ISBN: 978-0-7918-5607-9. Hamburg, Germany. September.

[36] Paniagua G., Sieverding C.H., Arts T., 2013, “A review of the von Karman institute compression tube facility for turbine research”. Proceedings of ASME Turbo Expo 2013. Paper GT2013- 95984. https://doi.org/10.1115/GT2013-95984. ISBN: 978-0-7918-5516-4. San Antonio, USA. June.

[35] Sozio E., Verstraete T., Paniagua G., 2013, “Design-Optimization Approach to Multistage Axial Contra-Rotating Turbines”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94762. https://doi.org/10.1115/GT2013-94762. ISBN: 978-0-7918-5523-2. San Antonio, USA. June.

[34] De Maesschalck C., Lavagnoli S., Paniagua G., 2013, “Blade Tip Shape Optimization for Enhanced Turbine Aerothermal Performance”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94754. https://doi.org/10.1115/GT2013-94754. ISBN: 978-0-7918-5516-4. San Antonio, USA. June. Nominated by the Heat Transfer Committee to Best Paper Award.

[33] Joly T., Verstraete T., Paniagua G., 2013, “Full Design of a Highly Loaded and Compact Contra-Rotating Fan Multidisciplinary Evolutionary Optimization”. Proceedings of ASME Turbo Expo 2013. Paper GT2013-94433. https://doi.org/10.1115/GT2013-94433. ISBN: 978-0-7918-5523-2. San Antonio, USA. June.

[32] Joly M., Verstraete T., Paniagua G., 2012, “Full design of a highly loaded fan by multi-objective optimization of through-flow and high-fidelity aero-mechanical performances”. Proceedings of the ASME Turbo Expo 2012. Paper GT2012-69686. http://doi.org/10.1115/GT2012-69686. Copenhagen, Denmark. June.

[31] Lavagnoli S., Paniagua G., De Maesschalck C., Yasa T., 2012, “Analysis of the Unsteady Overtip Casing Heat Transfer in a High Speed Turbine”. Proceedings of the ASME Turbo Expo 2012. Paper GT2012-69492. http://doi/org/10.1115/GT2012-69492. ISBN: 978-0-7918-4470-0. Copenhagen, Denmark. June.

[30] Yasa T., Paniagua G., 2011, “Robust Post-Processing Procedure for Multi-hole Pressure Probes”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011-46719. http://doi.org/10.1115/GT2011-46719. ISBN: 978-0-7918-4474-8. Vancouver, Canada. June.

[29] Pinilla V., Solano J.P., Paniagua, 2011, “Method and measurement of adiabatic wall temperature downstream of a High-Pressure turbine using thin-film sensors”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011- 46556. http://doi.org/10.1115/GT2011-46556. ISBN: 978-0-7918-5465-5. Vancouver, Canada. June.

[28] Puente R., Paniagua G., Verstraete T., 2011, “Aerodynamic Characterization of Transonic Turbine Vanes Optimized To Attenuate Rotor Forcing”. Proceedings of the ASME Turbo Expo 2011. Paper GT2011-46553. http://doi.org/10.1115/GT2011-46553. ISBN: 978-0-7918-5467-9. Vancouver, Canada. June.

[27] Bianchi S., Corsini A., Paniagua G., 2011, “Amplification of the forcing and tonal noise in transonic high-pressure turbines”. Proceedings of the 9th European Conference on Turbomachinery. Istambul, Turkey. March. EID: 2-s2.0-84915817710.

[26] Yasa T., Lavagnoli S., Paniagua G., 2011, “Impact of a Multi-Splitter Vane Configuration on the Losses in a 1.5 Turbine Stage”. Proceedings of the 9th European Conference on Turbomachinery. Istambul, Turkey. March. WOS:000375695300010.

[25] Yasa T., Paniagua G., Fridh J., Vogt D., 2010, “Performance of a nozzle guide vane in subsonic and transonic regimes tested in an annular sector”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22901. http://doi.org/10.1115/GT2010-22901. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[24] Pinilla V., Solano J.P., Paniagua G., Lavagnoli S., Yasa T., 2010, “Experimental heat transfer investigation in a multisplitter low pressure vane architecture”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22694. http://doi.org/10.1115/GT2010-22694. ISBN: 978-0-7918-4399-4. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[23] Lavagnoli S., Yasa T., Paniagua G., Duni S., Castillon L., 2010, “Aerodynamic Analysis of an Innovative Low Pressure Vane Placed in a S-Shape Duct”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22546. http://doi.org/10.1115/GT2010-22546. ISBN: 978-0-7918-4401-4. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[22] Joly M., Paniagua G., Verstraete T., 2010, “Attenuation of vane distortion in a transonic turbine using optimization strategies. Part 2 – Optimization”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22371. http://doi.org/10.1115/GT2010-22371. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[21] Joly M., Verstraete T., Paniagua G., 2010, “Attenuation of vane distortion in a transonic turbine using optimization strategies. Part 1 – Methodology”. Proceedings of the ASME Turbo Expo 2010. Paper GT2010-22370. http://doi.org/10.1115/GT2010-22370. ISBN: 978-0-7918-4402-1. eISBN: 978-0-7918-3872-3. Glasgow, UK. June.

[20] Pau M., Paniagua G., 2009, “Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane with Rim Seal Cavity Flow Ejection”. Proceedings of the ASME Turbo Expo 2009. Paper GT2009-60155. http://doi.org/10.1115/GT2009-60155. ISBN: 978-0-7918-4888-3. eISBN: 978-0-7918-3849-5. Orlando, USA. June. Nominated by the Turbomachinery Committee to Best Paper Award.

[19] Chana K.S., Povey T., Paniagua G., Schultz A., Martelli F., Smith A., Olive R., 2009, “Turbine Aero-Thermal External Flows II a European 6th Framework Programme Addressing the High Pressure Turbine”. Proceedings of the 8th European Conference on Turbomachinery. Graz, Austria. March.

[18] Solano J.P., Paniagua G., de la Loma A., 2008, “Novel 2D transient heat conduction calculation in a cooled rotor: Ventilation preheating – Blowdown flux”. Proceedings of the ASME Turbo Expo 2008. Paper GT2008-51308. http://doi.org/10.1115/GT2008-51308. ISBN: 978-0-7918-4314-7. eISBN: 0-7918-3824-2. Berlin, Germany. June. Best paper award from the Heat Transfer Committee.

[17] Pau M., Paniagua G., Delhaye D., de la Loma A., Ginibre P., 2008, “Aerothermal impact of stator-rim purge flow and rotor-platform film cooling on a transonic turbine stage”. Proceedings of the ASME Turbo Expo 2008. Paper GT2008-51295. http://doi.org/10.1115/GT2008-51295. ISBN: 978-0-7918-4316-1. eISBN: 0-7918-3824-2. Berlin, Germany. June.

[16] De la Loma A., Paniagua G., Verrastro D., Adami P., 2007, “Transonic Turbine Stage Heat Transfer Investigation in Presence of Strong Shocks”. Proceedings of the ASME Turbo Expo 2007. Paper GT2007-27101. http://doi.org/10.1115/GT2007-27101. ISBN: 0-7918-4795-0. eISBN: 0-7918-3796-3. Montreal, Canada. May.

[15] Billiard N., Jerez Fidalgo V., Dénos R., Paniagua G., 2007, “Analysis of Stator-Stator Clocking in a Transonic Turbine”. Proceedings of the ASME Turbo Expo 2007. Paper GT2007-27323. http://doi.org/10.1115/GT2007-27323. ISBN: 0-7918-4795-0 | eISBN: 0-7918-3796-3Montreal, Canada. May.

[14] Paniagua G., Persico G., Billiard N., Dénos R., 2007, “Modulation of the rotor-stator interactions due to clocking”. Proceedings of the 7th European Conference on Turbomachinery. Athens, Greece. March.

[13] Yasa T., Paniagua G., Bussolin A., 2007, “Performance Analysis of a Transonic High Pressure Turbine”. Proceedings of the 7th European Conference on Turbomachinery. Athens, Greece. March. EID: 2-s2.0-85043422031.

[12] Dénos R., Paniagua G., Yasa T., Fortugno E., 2006, “Determination of the Efficiency of a Cooled HP Turbine in a Blow-Down Facility”. Proceedings of the ASME Turbo Expo 2006. Paper GT2006-90460. http://doi.org/10.1115/GT2006-90460. ISBN: 0-7918-4241-X. eISBN: 0-7918-3774-2. Barcelona, Spain. May.

[11] Yasa T., Paniagua G., Dénos R., 2006, “Application of Hot-Wire Anemometry in a Blow-Down Turbine Facility”. Proceedings of the ASME Turbo Expo 2006. Paper GT2006-90457. http://doi.org/10.1115/GT2006-90457. ISBN: 0-7918-4237-1. eISBN: 0-7918-3774-2. Barcelona, Spain. May. Nominated by the Controls, Diagnostics & Instrumentation Committee to Best Paper Award.

[10] Billiard N., Paniagua G., Dénos R., 2005, “Effect of Clocking on the Heat Transfer Distribution of a Second Stator tested in a One and a Half Stage HP Turbine”. Proceedings of the ASME Turbo Expo 2005. Paper GT2005-68462. https://doi.org/10.1115/GT2005-68462. ISBN: 0-7918-4730-6. eISBN: 0-7918-3754-8Reno, USA. June.

[9] Dénos R. and Paniagua G., 2005, “Effect of Vane-Rotor Interaction on the Unsteady Flowfield downstream of a Transonic HP Turbine”. Proceedings of the 6th European Conference on Turbomachinery. Lille, France. April. EID: 2-s2.0-84925431070.

[8] Paniagua G., Dénos R., Almeida S., 2004, “Effect of hub endwall cavity flow ejection on the flowfield of a transonic high pressure turbine”. Proceedings of the ASME Turbo Expo 2004. Paper GT2004-53458. http://doi.org/10.1115/GT2004-53458. ISBN: 0-7918-4170-7. eISBN: 0-7918-3739-4. Vienna, Austria. June.

[7] Gadea J., Dénos R., Paniagua G., Billiard N., Sieverding C.H., 2004, “Effect of Clocking on the Second Stator Pressure Field of a one and a half stage Transonic Turbine”. Proceedings of the ASME Turbo Expo 2004. Paper GT2004-53463. https://doi.org/10.1115/GT2004-53463. ISBN: 0-7918-4170-7. eISBN: 0-7918-3739-4. Vienna, Austria. June.

[6] Paniagua G., Dénos R., Oropesa M., 2002, “Thermocouple probes for accurate temperature measurements in short duration facilities”. Proceedings of the ASME Turbo Expo 2002. Paper GT2002-30043. https://doi.org/10.1115/GT2002-30043. ISBN: 0-7918-3607-X. eISBN: 0-7918-3601-0. Amsterdam, Holland. June.

[5] Dénos R. and Paniagua G., 2002, “Influence of the Hub Endwall Cavity flow on the Time-averaged and Time-resolved Aerothermodynamics of an Axial HP Turbine Stage”. Proceedings of the ASME Turbo Expo 2002. Paper GT2002-30185. https://doi.org/10.1115/GT2002-30185. ISBN: 0-7918-3608-8. eISBN: 0-7918-3601-0. Amsterdam, Holland. June.

[4] Michelassi V., Giangiacomo P., Martelli F., Dénos R., Paniagua G., 2001, “Steady Three-Dimensional Simulation of Transonic Axial Turbine Stage”. Proceedings of ASME Turbo Expo 2001. Paper 2001-GT-0174. https://doi.org/10.1115/2001-GT-0174. ISBN: 978-0-7918-7852-1. New Orleans, USA. June.

[3] Paniagua G., Dénos R., Arts T., 2001, “Steady-Unsteady Measurements of the Flowfield downstream of a Transonic HP Turbine Stage”. Proceedings of the 4th European Conference on Turbomachinery. Firenze, Italy. March. ISBN: 88-86281-57-9.

[2] Dénos R., Arts T., Paniagua G., Michelassi V., Martelli F., 2000, “Investigation of the unsteady rotor aerodynamics in a transonic turbine stage”. Proceedings of ASME Turbo Expo 2000. Paper 2000-GT-0435. http://doi.org/10.1115/2000-GT-0435. ISBN: 978-0-7918-7854-5. Munich, Germany. May.

[1] Dénos R., Sieverding C.H., Arts T., Brouckaert J.F., Paniagua G., Michelassi. V., 1999, “Experimental Investigation of the Unsteady Rotor Aerodynamics of a Transonic Turbine Stage”. Proceedings of the 3rd European Conference on Turbomachinery. London, UK. March. ISBN: 1 86058 196 X. ISSN: 1356-1448.

Conference Proceedings (138):

[138] Bhatnagar L., Paniagua G., 2025, “Assessment of a Diodic Turbine to prevent backflow”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2025-0608. SciTech Forum. Orlando, USA. January.

[137] Ruan A., Gejji R., Bach E., Slabaugh C., Paniagua G., 2025, “Effect of Geometric and Flow Parameters on Hydrogen-Air Rotating Detonation Combustor Operability and Performance”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2025-2458. SciTech Forum. Orlando, USA. January.

[136] Boes K., Inhestern L., Paniagua G., 2025, “1D Modeling of Supersonic Passage Starting using Air-Water Similarity”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2025-1774. SciTech Forum. Orlando, USA. January.

[135] Bhatnagar L., Sreen K., Ruan A., Paniagua G., 2024, “A probabilistic approach for correction of multi-hole directional probes for varying flow fields”. American Physical Society Division of Fluid Dynamics Annual Meeting. Salt Lake City, UT. November.

[134] Castillo A., Bhatnagar L., Liliedahl D., Paniagua G., 2024, “An holistic approach to data processing and handling for turbomachinery”. Proceedings of the 26th International Symposium on Airbreathing Engines. Toulouse, France. September.

[133] Ruan A., Nowak H., Inhestern L., Paniagua G., Taylor J., Clark J., 2024, “Bridging the gap between linear cascades and rotating turbine facilities”. Proceedings of the 26th International Symposium on Airbreathing Engines. Toulouse, France. September.

[132] Bhatnagar L., Aye-Addo N., Butzen M., Paniagua G., 2024, “Data acquisition, control and processing of the Purdue Experimental Turbine Aerothermal Laboratory”. Proceedings of the 27th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Larnaca, Cyprus. April.

[131] Ruan A., Tuite L., Inhestern L., Moeller A., Paniagua G., 2024, “Design and operation of an open jet wind tunnel at Purdue University”. Proceedings of the 27th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Larnaca, Cyprus. April.

[130] Wang R., Suppiah A., Braun J., Fugger C., Roy S., Perkins D., Paniagua G., Athmanathan V., Meyer T., 2024, “Optically accessible GOx/RP-2 RDRE with MHz-rate visualization of the dynamic wave phenomena”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-1251. SciTech Forum. Orlando, USA. January.

[129] Crosmer J., Zhou T., Boes K., Slipchenko M., Paniagua G, Bane S., Meyer T., 2024, “Characterization of Uncertainty in FLEET Velocimetry for High-Speed Flows”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-2325. SciTech Forum. Orlando, USA. January.

[128] Suppiah A., Wang R., Paniagua G., Hoeper M., Athmanathan V., Meyer T., Webb A., Braun J., 2024, “Modeling of liquid injection in rotating detonation combustors”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-1252. SciTech Forum. Orlando, USA. January.

[127] Sawada S., Itouyama N., Matsuoka K., Kasahara J., Braun J., Paniagua G., Kawasaki A., Watanabe H., Higashino K., Matsuo A., Funaki I., 2024, “The Rotating Detonation Engines with The Helical Combustion Chambers”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-1833. SciTech Forum. Orlando, USA. January.

[126] Bavkar A., Salek P., Athmanathan V., Paniagua G., Meyer T., Braun J., Perkins D., Fugger C., 2024, “Multi-Objective Optimization and Validation of a Diodic Profile”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-1036. SciTech Forum. Orlando, USA. January.

[125] Braun J., Lynch F., Andress W., Bavkar A., Athmanathan V., Paniagua G., 2024, “Design, Analysis, and Test of a Cooled Rotating Detonation Combustor through axially injected stepped cooling slots”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-0815. SciTech Forum. Orlando, USA. January.

[124] Grunenwald J., Braun J., Paniagua G., 2024, “Analysis of Rotating Detonation Combustors through Reduced-Order Modeling”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-2037. SciTech Forum. Orlando, USA. January.

[123] Kiefer N., Braun J., Paniagua G., 2024, “Development and characterization of high Mach nozzle using high-frequency optical and surface techniques”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-2890. SciTech Forum. Orlando, USA. January.

[122] Boes K., Bean S., Grunenwald J., Moeller A., Inhestern L, Paniagua G., 2024, “Supersonic Passage Startability in a Water Table”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-1775. SciTech Forum. Orlando, USA. January.

[121] Sanchez de la Rosa D., Bhatnagar L, Paniagua G., Bloxham M., 2024, “Infrared thermography on outer casing surface for heat transfer measurement in aerospace applications”. Proceedings of the 62nd AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2024-2883. SciTech Forum. Orlando, USA. January.

[120] Nakata K., Kimura R., Ishihara K., Itouyama N., Matsuoka K., Kasahara J., Kawasaki A., Watanabe H., Matsuo A., Funaki I., Higashino K., Athmanathan V., Braun J., Meyer T., Paniagua G., 2023, “Operation characteristics of a throatless rotating detonation engine with diverging channel”. Proceedings of the 29th International Colloquium on the Dynamics of Explosions and Reactive Systems. SNU Shiheung, Korea. July.

[119] Lazpita E., Garicano J., Paniagua G., Valero E., Le Clainche S., 2023, “Advanced data-driven tools for flow control in aeronautical applications”. Proceedings of the First International Conference in Math 2 Product Emerging Technologies in Computational Science for Industry, sustainability and Innovation. Taormina, Italy. June.

[118] Pal P., Braun J., Paniagua G., Athmanathan V., Meyer T., 2023, “High-Fidelity CFD Modeling of Combustion Dynamics in a Full-Scale Non-Premixed Hydrogen-Air Rotating Detonation Engine Combustor+Diffuser+Stator Configuration”. Proceedings of the Aviation Forum. San Diego, USA. June

[117] Braun E., Crosmer J., Ritchie D., Kiefer N., Braun J., Paniagua G., Slipchenko M., Meyer T., 2023. “Joint Temperature and Velocity Statistics in High-speed Flows Using Simultaneous CARS Thermometry and FLEET Velocimetry”. Proceedings of the 61th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2023-0221. SciTech Forum. National Harbour, USA. January. Walter Lempert Best Student Paper Award.

[116] Fugger C., Jiang N., Hsu M., Slipchenko M., Roy S., Perkins H., Athmanathan V., Ayers Z., Webb A.M., Hoeper M.W., Wang R.B., Lemcherfi A., Black C., Gejji R., Plaehn E.W., Braun J., Paniagua G., Slabaugh C., Meyer T., 2023, “Advanced Diagnostics for MegaHerz Imaging of Mixing, Fuel Spray, and Combustion Processes for Rotating Detonation Combustors”. Proceedings of the 13th Liquid Propulsion Joint Army Navy Nasa Air Force (JANNAF). USA. December.

[115] Bhatnagar L., Ruan A., Paniagua G., 2022, “Probabilistic approach for correction of five-hole probes: Effect of Mach and wall interaction”. Proceedings of the 26th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Pisa, Italy. September.

[114] Inhestern L., Braun J., Peistch D., Paniagua G., 2022, “Transient power and loss generation in supersonic turbines downstream of rotating detonation combustors”. Proceedings of the International Workshop on Detonation Propulsion. International Constant Volume and Detonation Combustion Workshop. Berlin, Germany. August.

[113] Nakata K., Ota K., Ito S., Ishihara K., Goto K., Itouyama N., Watanabe H., Kawasaki A., Matsuoka K., Kasahara J., Matsuo A., Funaki I., Higashino K., Braun J., Meyer T., Paniagua G., 2022, “Acceleration of Burned gas to Supersonic in a Throatless Rotating Detonation Engine”. Submitted to the 28th International Colloquium on the Dynamics of Explosions and Reactive Systems. Napoli, Italy. June

[112] Wang R.B., Braun J., Paniagua G., Andre T., Falempin F., 2022, “Characterization of Eulerian Multiphase Flow Modeling of Liquid Atomization in Supersonic Crossflow injection”. Proceedings of the 32nd Annual Conference on Liquid Atomization and Spray Systems. Madison, Wisconsin, USA. May.

[111] McKelvy A., Braun J., Paniagua G., 2022, “Characterization and correction of transmission losses in a pulley based thrust stand calibrator”. Advanced Instrumentation, Diagnostics and Controls for Applications in Turbomachinery, Penn-State, Pennsylvania, USA. May.

[110] Athmanathan V., Webb A., Wang R., Braun J., Paniagua G., Slipchenko M., Fugger C., Roy S., Meyer T., 2022, “Detonation wave dynamics of straight and expanding annular injectors using MHz rate OH* chemiluminescence, and URANS simulations”. Proceedings of the 60th AIAA Aerospace Sciences Meeting. https://arc.aiaa.org/doi/10.2514/6.2022-1264. SciTech Forum. San Diego, USA. January.

[109] Lui H.F.S., Wolf R.W., Braun J., Paniagua G., 2021, “Numerical simulations of supersonic stator cascades: Assessment of LES and RANS calculations”. Proceedings of the AIAA Aviation Forum. Washington, USA. June. https://arc.aiaa.org/doi/10.2514/6.2021-2870.

[108] Martinez Cava A., Valero E., Paniagua G., 2020, “Trailing edge flow discharge control exploiting flow global instabilities”. Proceedings of the 1th European Conference for Aero-Space Sciences Workshop on Flow Control. Lille, France, September.

[107] Athmanathan V., Braun J., Ayers Z., Fisher J., Fugger C., Roy S., Paniagua G., Meyer T., 2020, “Detonation structure evolution in an optically-accessible non-premixed H2-Air RDC using MHz rate imaging”. Proceedings of the 58th AIAA Aerospace Sciences Meeting. SciTech Forum. Orlando, USA. January. https://doi.org/10.2514/6.2020-1178.

[106] Liu Z, Braun J., Saavedra J., Paniagua G., 2019, “Numerical analysis on the performance of CTAP measurements in pulse and rotating detonation combustors”. Proceedings of the 55th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2019-4378. Indianapolis, USA. August.

[105] Braun J., Gonzalez Cuadrado D., Andreoli V., Paniagua G., Liu Z, Saavedra J., Athmanathan V., Meyer T., 2019, “Characterization of an integrated nozzle and supersonic axial turbine with a rotating turbine with a rotating detonation combustor”. Proceedings of the 55th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2019-3873. Indianapolis, USA. August.

[104] Gonzalez Cuadrado D., Aye-Addo A. N., Andreoli V., Bhatnagar L., Lozano F., Fisher J., Paniagua G., Saavedra J., Inman D., Meyer T., Bloxham M., Clemens E., Stults B., White T., Wallace A., Johnson D., 2019, “Purdue Small Turbine Aerothermal Rotating Rig (STARR)”. Proceedings of the 55th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2019-4004. Indianapolis, USA. August.

[103] Aye-Addo P., Andreoli V., Long N., Paniagua G., 2019, “CFD-based design of optical diagnostic techniques for turbine vane testing”. Proceedings of the 55th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2019-4086. Indianapolis, USA. August.

[102] Athmanathan V., Fisher J., Ayers Z., Gonzalez Cuadrado D., Andreoli V., Braun J., Meyer T., Paniagua G., Fugger C., Roy S., 2019, “Turbine-integrated High-pressure Optical RDE (THOR) for injection and detonation and dynamics assessment”. Proceedings of the 55th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2019-4041. Indianapolis, USA. August.

[101] Rahbari I., Paniagua G., 2019, “Acoustic streaming in high speed turbulent channel flow”. Proceedings of the 8th European Conference for Aero-Space Sciences. Madrid, Spain, July.

[100] Wang Y., Saavedra J., Paniagua G., Valero E., 2019, “Optimization in Active Flow Separation Control in Low-Pressure Turbines”. Proceedings of the 8th European Conference for Aero-Space Sciences. Madrid, Spain, July.

[99] Lozano F., Saavedra J., Paniagua G., Martinez Cava A., Valero E., 2019, “Experimental approach to characterize base region Coanda flow topology induced by pulsating blowing”. Proceedings of the 8th European Conference for Aero-Space Sciences. Madrid, Spain, July.

[98] Martinez Cava A., Valero E., Paniagua G., Lozano F., Saavedra J., 2019, “Optimization of the base bleed to control trailing edge flows in a wide range of Mach numbers”. Proceedings of the 8th European Conference for Aero-Space Sciences. Madrid, Spain, July.

[97] Martinez Cava A., Valero E., De Vicente J., Paniagua G., 2019, “Coanda flow characterization on base bleed configurations using global stability analysis”. Proceedings of the 57th AIAA Aerospace Sciences Meeting. SciTech. https://doi.org/10.2514/6.2019-0881. San Diego, USA. January.

[96] Braun J., Paniagua G., 2018, “Analysis of Advanced Turbine Integration with Rotating Detonation Combustors using a Time-Accurate Reduced-Order-Model”. Proceedings of the 11th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. September.

[95] Bhatnagar L., Braun J., Andreoli V., Gonzalez Cuadrado D., Liu Z., Paniagua G., 2018, “Developments in high frequency directional probes for high temperature applications”. Proceedings of the 24th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[94] Aye-Addo P., Long N., Paniagua G., Saavedra J., 2018, “Development of laser lifetime pressure sensitive paint for unsteady measurements”. Proceedings of the 24th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[93] Fisher J., Saavedra J., Paniagua G., Meyer T., Slipchenko M., 2018, “Development of high frequency particle image velocimetry to characterize separation regions downstream of a hump”. Proceedings of the 24th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Prague, Czech Republic. August.

[92] Liu Z, Braun J., Paniagua G., 2018, “Three-Dimensional Optimization of a subsonic axial turbine designed for high inlet Mach number”. Proceedings of the 54th AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2018-4480. Cincinnati, USA. July.

[91] Padilla I., Saavedra J., Paniagua G., Pinna F., 2018, “Analysis of the boundary layer stability to assess flow separation control capability in low-pressure turbines”. Proceedings of the 7th European Conference on Computational Fluid Dynamics. Glasgow, UK. June. EID: 2-s2.0-85081051796.

[90] Vyas U., Andreoli V., Paniagua G., 2018, “Effect of transonic inlet design on the performance of a micro-turbojet engine”. Proceedings of the 56th AIAA Aerospace Sciences Meeting. SciTech. https://doi.org/10.2514/6.2018-1624. Grapevine, USA. January.

[89] Saavedra J., Paniagua G., 2017, “Flow Conditioning of Subsonic and Supersonic Blowdown wind tunnels”. Proceedings of the 23nd International Symposium on Airbreathing Engines. Manchester, UK. September.

[88] Gonzalez Cuadrado D., Andreoli V., Paniagua G., 2017, “Experimental Calibration of a High Speed Blowdown Tunnel”. Proceedings of the 23nd International Symposium on Airbreathing Engines. Manchester, UK. September.

[87] Liu Z, Braun J., Paniagua G., 2017, “Performance of axial turbines exposed to large fluctuations”. Proceedings of the 53rd AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2017-4817. Atlanta, USA. July.

[86] De Maesschalck C., Paniagua G. 2017, “Turbine Tip Flow Control through Upstream Purge Cooling Optimization”. Proceedings of the 53rd AIAA/SAE/ASEE Joint Propulsion Conference, AIAA Propulsion and Energy Forum. https://doi.org/10.2514/6.2017-4816. Atlanta, USA. July.

[85] Saavedra J., Paniagua G., 2017, “Thermal boundary layer response to periodic fluctuations”. Computational Science and Engineering Student Conference. Purdue, USA. April.

[84] Braun J., Paniagua G., Falempin F., Lanour B., 2017, “Bladeless turbines for unsteady high speed flows”. Proceedings of 21st AIAA International Space Planes and Hypersonic Systems and Technologies Conference. https://doi.org/10.2514/6.2017-2422. Xiamen, China. March.

[83] Braun J., Saavedra J., Paniagua G., 2017, “Evaluation of the unsteadiness across nozzles downstream of rotating detonation combustors”. Proceedings of the 55th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2017-1063. AIAA SciTech. Grapevine, USA. January.

[82] Juangphanich C., De Maesschalck C., Paniagua G., 2017, “From Conceptual 1D Design Towards Full 3D Optimization of a Highly Loaded Turbine Stage”. Proceedings of the 55th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2017-0110. Grapevine, USA. January.

[81] Gibbs J., Bachmann A., Seyfang G., Peebles P., May C., Saracoglu B., Paniagua G., 2016, “An Open-Rotor Distributed Propulsion Aircraft Study”. Proceedings of the Deutscher Luft und Raumfahrtkongress 2016. Braunschweig, Germany. September. https://elib.dlr.de/106055.

[80] Gonzalez Cuadrado D., Paniagua G., 2016, “Discrete green functions approach to predict convective heat transfer”. Proceedings of the 23rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[79] Liu Z., Paniagua G., 2016, “On the ability of conventional aerodynamic probes to resolve high frequency phenomena”. Proceedings of the 23rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[78] Braun J., Paniagua G., 2016, “Frequency enhancement of dual-junction thermocouple probes”. Proceedings of the 23rd Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Stuttgart, Germany. September.

[77] Raush G., Villafañe L., Paniagua G., 2016, “Optical Characterization of a Cross flow fan for Distributed Propulsion”. Proceedings of the 52nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4960. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[76] Braun J., Sousa J., Paniagua G., 2016, “Assessment of the Boundary Layer within a Rotating Detonation Combustor”. Proceedings of the 52nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4557. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[75] Thiry N., Paniagua G., 2016, “Characterization of the time-resolved starting process of supersonic diffusers”. Proceedings of the 52nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2016-4661. eISBN: 978-1-62410-406-0. Salt Lake City, USA. July.

[74] Lavagnoli S., Andreoli V., De Maesschalck, Paniagua G., Gonzalez Cuadrado D., 2016, “Wind Tunnel Testing of Turbine Blade Tip Flows”. Proceedings of the 54th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0910. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[73] Saracoglu B. H., Paniagua G., 2016, “Compressor integration study for a pulse detonation engine”. Proceedings of the 54th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0397. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[72] Gorbachova Y., Valero E., Paniagua G., Martinez Cava A., Saracoglu B., 2016, “Study of the attainable flow topologies in a supersonic blunt trailing edge at various blowing ratios”. Proceedings of the 54th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0909. eISBN: 978-1-62410-393-3. San Diego, USA. January.

[71] Braun J., Saracoglu B., Magin T., Paniagua G., 2016, “Mono-dimensional analysis of the MagnetoHydrodynamic effect in Rotating Detonation Combustors”. Proceedings of the 54th AIAA Aerospace Sciences Meeting, AIAA SciTech. https://doi.org/10.2514/6.2016-0898. eISBN: 978-1-62410-393-3. San Diego, USA. January. Nominated by the gas turbine engine committee to Best Paper Award.

[70] De Maesschalck C., Lacor C., Paniagua G., Lavagnoli S., Remiot A., Bricteux L., 2015, “Performance Robustness of Turbine Squealer Tip Designs due to Manufacturing and Engine Operation”. Proceedings of the 22nd International Symposium on Airbreathing Engines. Phoenix, USA. October.

[69] Sousa J., Paniagua G., 2015, “Fast design methodology for supersonic internal passages”. Proceedings of the 22nd International Symposium on Airbreathing Engines. Phoenix, USA. October.

[68] Sousa J., Paniagua G., 2015, “One-Dimensional Assessment of Supersonic Inlet Turbines”. Proceedings of the 51st AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2015-3930. eISBN: 978-1-62410-321-6. Orlando, USA. July.

[67] Kutlu B., Saracoglu B., Paniagua G., Kapat J., 2015, “Aeroacoustics of Flow over Rectangular Cavities”. Proceedings of the 51st AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2015-3929. eISBN: 978-1-62410-321-6. Orlando, USA. July.

[66] Irsch M.P., Davis R., Clark J., Paniagua G., 2015, “Flow Control of Unsteadiness in the Wake of a Turbine Blade”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-0824. eISBN: 978-1-62410-343-8.Kissimmee, USA. January.

[65] Saracoglu B., Paniagua G., 2015, “Analysis of the flow flied around the wing section of a FanWing aircraft under various flow conditions”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-1936. eISBN: 978-1-62410-343-8. Kissimmee, USA. January.

[64] Saavedra J., Lavagnoli S., Paniagua G., 2015, “Implications of boundary layer establishment on convective heat transfer experiments”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2015-0258. eISBN: 978-1-62410-343-8.Kissimmee, USA. January.

[63] Gibbs J., Seyfang G., Peebles P., Villafañe L., Saracoglu B., Paniagua G., May C., Nagel B., Bachman A., 2014. “An analysis of FanWing Flight Physics and Potential Business Cases”. Proceedings of the 4th EASN Association International Workshop on Flight Physics and Aircraft Design. Aachen, Germany. October.

[62] Lavagnoli S., De Maesschalck, Paniagua G., 2014, “Uncertainty Analysis of Adiabatic Wall Temperature in Turbine Experiments”. Proceedings of the 22th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Lyon, France. September.

[61] Saracoglu B.H., Paniagua G., Minguez N., 2014, “Radial compressor with unsteady outlet blockage induced by detonation combustion”. Proceedings of the 9th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[60] Braun J., Saracoglu B.H., Paniagua G., 2014, “Analysis of continuous detonation wave combustor outlet conditions”. Proceedings of the 9th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[59] Sousa J., Martinez O., Paniagua G., 2014, “Supersonic flow turning in a channel exposed to fluctuating inlet conditions”. Proceedings of the 9th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. May.

[58] Fernandez Villace V., Paniagua G., Steelant J., 2014, “Installed performance of an Air-Turbo-Rocket Expander Cycle”. Proceedings of Space Propulsion, European Space Agency. Cologne, Germany, May.

[57] Lavagnoli S., Andreoli V., Paniagua G., Fernandez Villace V., 2014, “High-Fidelity Model of a Transient Turbine Facility for Off-Design Aerothermal Testing”. Proceedings of the AIAA Science and technology Forum and Exposition. https://doi.org/10.2514/6.2014-1309. eISBN: 978-1-62410-256-1. National Harbor, USA. January.

[56] Paniagua G., Iorio M.C., Vinha N., Sousa J., 2013, “Turbine Airfoil Design for High Supersonic Pulsating Flows”. Proceedings of the 21st International Symposium on Airbreathing Engines. Busan, Korea. September.

[55] Villafañe L., Paniagua G., 2013, “Three-dimensional Aerodynamic Characterization of Turbofan Bypass-flow Heat Exchangers in an Intermittent Transonic facility”. Proceedings of the 43rd AIAA Fluid Dynamics Conference. https://doi.org/10.2514/6.2013-2728. ISBN: 978-1-62748-891-4. San Diego, USA. June.

[54] Paniagua G., and Saracoglu B., 2012, “Tunnel design, testing and experience on shock control using pulsating blowing”. Presented at the 118th Semi-Annual Meeting of the Supersonic Tunnel Association International. Brussels, Belgium. October.

[53] Grainger A., Boyce R., Tirtey S., Ogawa H., Paniagua G., Paris S., 2012, “The Unsteady Flow Physics of Hypersonic Inlet Starting Processes”. Proceedings of 18th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Tours, France. September. eISBN: 978-1-60086-931-0. https://doi.org/10.2514/6.2012-5937.

[52] Rodriguez Miranda I., Fernandez Villace V., Paniagua G., 2012, “Modeling, Analysis and Optimization of the Air Turbo Rocket Expander Engine”. Proceedings of 18th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. eISBN: 978-1-60086-931-0. Tours, France. September. https://doi.org/10.2514/6.2012-5837.

[51] Rocandio P., Paniagua G., Babou Y., 2012, “Airfoil base region control with dielectric barrier discharge”. Proceedings of the 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2012-3936. eISBN: 978-1-60086-935-8. Atlanta, USA. July.

[50] Saracoglu B., Paniagua G., 2012, “Heat Transfer Investigation on a Transonic Turbine Cascade with Pulsating Trailing Edge Cooling”. Proceedings of the 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2012-3880. eISBN: 978-1-60086-935-8. Atlanta, USA. July.

[49] Sousa J., Lavagnoli S., Paniagua G., Villafañe L., 2012, “Inverse Heat Flux Evaluation using Conjugate Gradient Methods from Infrared Imaging”. Proceedings of the 12th Quantitative Infrared Thermography Conference. Naples, Italy. June.

[48] Tomasoni F., Saracoglu B., Paniagua G., 2012, “A decision making algorithm for automatic shock waves detection in Schlieren imaging”. Proceedings of the 21th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Valencia, Spain. March.

[47] Villafañe L., Paniagua G., 2012, “Numerical Analysis and Characterization of Fine Wire Thermocouples”. Proceedings of the 21th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Valencia, Spain. March.

[46] Joly M., Maffulli R., Fernandez Villace V., Paniagua G., Verstraete T., 2011, “Air Turbo Rocket Turbomachinery Design”. Proceedings of the 20th International Symposium on Airbreathing Engines. Paper 2011-1333. Gotheborg, Sweden. September.

[45] Saracoglu B.H., Paniagua G., Yasa T., Duni S., Salvadori S., Martelli F., 2011, “Pulsating Trailing Edge Coolant Blowing in a High-Pressure Supersonic Turbine to Control Shock Waves”. Proceedings of the 20th International Symposium on Airbreathing Engines. Paper 2011-1729. Gotheborg, Sweden. September.

[44] Villafañe L., Yasa T., Paniagua G., Bonfanti G., 2011, “Development of Experimental Techniques for the Characterization of Helicoidal Fin Arrays in Transonic Flow Conditions”. Proceedings of the 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-6093. eISBN: 978-1-60086-949-5. San Diego, USA. July. Nominated by the gas turbine engine committee to Best Paper Award.

[43] Vyvey P., Bosschaerts W., Fernandez Villace V., Paniagua G., 2011, “Study of an Airbreathing Variable Cycle Engine”. Proceedings of the 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5758. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[42] Fernandez Villace V., Paniagua G., 2011, “Simulation of a Variable-Combined-Cycle engine for dual subsonic and supersonic cruise”. Proceedings of the 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-6110. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[41] Paniagua G., Saracoglu B., Tomasoni F., Salvadori S., Miranda A., Martelli F., 2011, “Modulation of Vane Shocks with Pulsating Coolant Flows”. Proceedings of the 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5815. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[40] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B., 2011, “Pulsating coolant ejection effects downstream of a transonic rounded trailing edge”. Proceedings of the 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2011-5816. eISBN: 978-1-60086-949-5. San Diego, USA. July.

[39] Saracoglu B., Huang G., Paniagua G., 2011, ‘Numerical Study of a Transonic Linear Cascade for Pulsating Trailing Edge Cooling”. Proceedings of the 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Brussels, Belgium. July.

[38] Joly M., Verstraete T., Paniagua G., 2011, “Design-Optimization for Compactness of Highly-Loaded Fan Rotor”. Proceedings of the 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Brussels, Belgium. July.

[37] Grainger A., Tirtey S.C., Boyce R.R., Paris S., Paniagua G., 2011, “Starting mechanisms for high contraction ratio hypersonic inlets”. Proceedings of the 7th Aerothermodynamics Symposium, European Space Agency. Brugge, Belgium, May.

[36] Bottini H., Sonda A., Schreivogel P., Paniagua G., 2011, “Design and Qualification of a Supersonic Wind Tunnel for Transition Experiments”. Proceedings of the 7th Aerothermodynamics Symposium, European Space Agency. Brugge, Belgium, May.

[35] Paniagua G., Garcia Galache J.P., Romero Catala J.M., 2010, “Aerodesign methodology of a supersonic turbine for a pulse detonation engine”. Proceedings of the 7th International Colloquium on Pulsed and Continuous Detonations. St. Petersburg, Russia. October.

[34] Bonfanti G., Yasa T., Lavagnoli S., Paniagua G., 2010, “Development of oil dot visualization to measure the shear stress”. Proceedings of the 20th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Milano, Italy. September.

[33] Villafañe L., Paniagua G., Desset J., Bajusz, Hiernaux S., 2010, “Development of a Transonic Wind Tunnel to investigate Engine Bypass Flow Heat Exchangers”. Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2010-6951. eISBN: 978-1-60086-958-7. Nashville, USA. July.

[32] Schreivogel P., Paniagua G., Bottini H., Massutti D., Solano J.P., Chazot O., 2010, “Heat transfer investigation in an hypersonic boundary layer”. Proceedings of the 10th Quantitative Infrared Thermography Conference. Québec City, Canada. July.

[31] Bernardini C., Salvadori S., Martelli F., Paniagua G., Saracoglu B., 2010, “Time-resolved analysis of the base region in cooled transonic turbine airfoils”. Proceedings of the 5th European Conference on Computational Fluid Dynamics, ECCOMAS CFD 2010. Lisbon, Portugal. June.

[30] Gonzalez M., Paniagua G., Saracoglu B., Tiseira A., 2010, “Pulsating cooling system for high-pressure turbine blades”. Proceedings of the 5th AIAA Flow Control Conference. https://doi.org/10.2514/6.2010-4587. eISBN: 978-1-62410-140-3. Chicago, USA. June.

[29] Fernandez-Villacé V., Paniagua G., 2010, “Simulation of a Combined Cycles for High Speed Propulsion”. Proceedings of the 48th AIAA Aerospace Sciences Meeting. https://doi.org/10.2514/6.2010-1125. eISBN: 978-1-60086-959-4. Orlando, USA. January.

[28] Schreivogel P., Paniagua G., Bottini H., Massutti D., Solano J.P., Chazot O., 2009, “Hypersonic boundary layer transition measured with thin film gauges”. Presented at the 2009 Ercoftac-Belgium Yearly Seminar, Brussels, Belgium. December.

[27] Billonnet G., Castillon L., Paniagua G., Yasa T., Olive R., 2009, “Experimental and numerical investigations on the HP turbine flow at off-design conditions”. Proceedings of the 19th International Symposium on Airbreathing Engines. AIAA Paper 2009-1325. Montreal, Canada. September.

[26] Verley S., Castillon L., Paniagua G., 2009, “A comprehensive analysis of clocking effects in a transonic turbine stage using chorochronic simulation and experimental investigations”. Proceedings of the 19th International Symposium on Airbreathing Engines. AIAA Paper 2009-1215. Montreal, Canada. September.

[25] Lavagnoli S., Yasa T., Paniagua G., 2009, “Aerodynamic Performance of a Multi-splitter LP Vane Downstream of a Transonic HP Turbine Stage”. Proceedings of the 12th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. London, United Kingdom. September.

[24] Paniagua G., Lavagnoli S., Verstraete T., Mahmoudi W., Benamara T., 2009, “Aerodesign of a Transonic Contrarotating Turbine for a Rocket Engine”. Proceedings of the 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6-2009-5105. eISBN: 978-1-60086-972-3. Denver, USA. August.

[23] Saracoglu B.H., Paniagua G., Rambaud P., 2009, “Blunt trailing edge cooling effects at supersonic regime”. Proceedings of the 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. AIAA 2009-5233. https://doi.org/10.2514/6-2009-5233. eISBN: 978-1-60086-972-3. Denver, USA. August.

[22] Schloegel, F., Paniagua, G, Tirtey, S., 2008, “Active Boundary Layer Trip for Supersonic Flows”. Proceedings of the Sixth European Symposium on Aerothermodynamics for Space Vehicles. Versailles, France. November. SP-659. ISBN: 978-92-9221-223-0. ISSN: 1609-042X. Editors: H. Lacoste & L. Ouwehand.

[21] Varvill R., Paniagua G., Kato H., Thatcher M., 2008, “Design and Testing of the Contra-Rotating Turbine for the Scimitar Precooled Mach 5 Cruise Engine”. Proceedings of the 59th International Astronautical Congress. Paper IAC-08-C4.5.3. Glasgow, UK. September.

[20] Paniagua G., Sieverding C.H., Van den Braembussche R.A., 2008, “Aerodynamic analysis of the Vulcain 2 LOX turbine manifold”. Proceedings of the 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. https://doi.org/10.2514/6.2008-4661. Hartford, USA. July.

[19] Castillon L., Paniagua G., Yasa T., 2008, “Numerical Analysis of the Unsteady Strong Shock Interactions in a Transonic Turbine”. Proceedings of the 5th European Congress on Computational Methods in Applied Sciences and Engineering.Venice, Italy, July.

[18] Tulkens M., Paniagua G., Steiner A., 2008, “Single blade tip clearance measurements in a transient rig”. Proceedings of the 19th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Rhode Saint Genèse, Belgium. April.

[17] Michalek J., Paniagua G., Vergalla M., Zerelli N., Tulkens M., 2008, “Methodology to implement PSP technique in a transient facility”. Proceedings of the 19th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Rhode Saint Genèse, Belgium. April.

[16] Paniagua G., Yasa T., de la Loma A., Castillon L., Coton T., 2007, “Unsteady Strong Shocks Interactions in a Transonic Turbine: Experimental and Numerical Analysis”. Proceedings of the 18th International Symposium on Airbreathing Engines. AIAA Paper 2007-1218. Beijing, China. September.

[15] Paniagua G., Szokol S., Kato H., Manzini G., Varvill R., 2007, “Design of a Counter-Rotating Turbine for a Hypersonic Aircraft”. Proceedings of the 18th International Symposium on Airbreathing Engines. AIAA Paper 2007-1341. Beijing, China. September.

[14] Pau M., de la Loma A., Paniagua G., Delhaye D., 2007, “Film Cooling and Hub Disk Leakage Flow Experiments in a Fully Rotating HP Turbine Stage”. Proceedings of the 5th IASME / WSEAS International Conference on Fluid Mechanics and Aerodynamics. Athens, Greece. August. ISSN: 1109-2769. ISBN: 978-960-8457-99-7.

[13] Herbiet J.F., Paniagua G., Hendrick P., 2007, “Development of an analysis tool for Combined Propulsion Cycles”. Proceedings of the 2nd European Conference for Aero-Space Sciences. Paper 1-05-01. Brussels, Belgium. July.

[12] Jivraj F., Varvill R., Bond A., Paniagua G., 2007, “The Scimitar Precooled Mach 5 Engine”. Proceedings of the 2nd European Conference for Aero-Space Sciences. Paper 5-08-03. Brussels, Belgium, July.

[11] Adiloglu B., Paniagua G., Yasa T., 2007, “Unsteady Aerodynamic Blade Forces due to Strong Vane Shocks”. Proceedings of the 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[10] Billiard N., Paniagua G., Dénos R., 2007, “Impact of Clocking on the Aero-Thermodynamics of a Second Stator tested in a One and a Half Stage HP Turbine. Part I: Aerodynamic Effects”. Proceedings of the 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[9] Billiard N., Paniagua G., Dénos R., 2007, “Impact of Clocking on the Aero-Thermodynamics of a Second Stator tested in a One and a Half Stage HP Turbine. Part II: Effects on Heat Transfer”. Proceedings of the 8th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows. Lyon, France. July.

[8] Paniagua G., Yasa T., 2007, “Large vane shock interactions effects in the turbine outlet flow field”. Proceedings of the Conference: “Topical Problems in Fluid Mechanics 2007”. Prague, Czech Republic. February.

[7] Van den Braembussche R., Brouckaert J.F., Paniagua G., Briottet L, 2006, “Design and Optimization of a multistage turbine for a helium cooled reactor”. Proceedings of the 3rd International Topical Meeting on High Temperature Reactor Technology. Paper D00000051. Johannesburg, South Africa. October.

[6] Solano J.P., Paniagua G., Dénos, 2006, “2d Data Reduction Technique for Turbine Blade Heat Transfer Measurements Using Double-Layered Thin Film Gauges”. Proceedings of the 18th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Thessaloniki, Greece. September.

[5] Delhaye D., Paniagua G., Dénos, 2006, “Development of a three-hole probe for unsteady flow angle measurements”. Proceedings of the 18th Symposium on Measuring Techniques in Transonic and Supersonic Flow in Cascades and Turbomachines. Thessaloniki, Greece. September.

[4] Paniagua G., Persico G., Billiard N., 2006, “Rotor-stator interactions in a one and a half turbine stage”. Proceedings of the 11th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines. Moscow, Russia. September.

[3] Paniagua G., and Yasa T., 2006, “Accurate Turbine Inertia Measurement”. Proceedings of the 7th National Congress of Theoretical and Applied Mechanics. Mons, Belgium. May.

[2] Paniagua G., Dénos R., Billiard N., 2005, “Aero-thermal investigation of a highly loaded HP turbine”. Proceedings of the II International Scientific and Technical Conference Aero Engines of the XXI Century. Vol. 1, pp 373-374, ISBN 5-94049- 019-0. Moscow, Russia. December.

[1] Paniagua G., Dénos R., 2000, “Numerical Compensation in the Time Domain of Pressure Sensors”. Proceedings of the 15th Bi-Annual Symposium on Measuring Techniques for Transonic and Supersonic Flow in Cascades and Turbomachines. Firenze, Italy. September.

Contributions to Books (26):

[26] Wilkes J., Supak K., Broerman B., Paniagua G., 2025, “Research and development facilities for pipeline research”. Chapter 12. pp 429-446. K. Energy Transport Infrastructure for a Decarbonized Economy. Edited by Brun, T. Allison, R. Kurz and K. Wygant. Elsevier. Paperback ISBN: 978-0-443-21893-4. https://doi.org/10.1016/C2022-0-03250-5.

[25] Paniagua G., Bhatnagar L., Rebassa A., 2022, “Wind tunnel design”. von Karman Institute Lecture Series on “Stability and Sensitivity Methods for Flow Control and Industrial Design”. ISBN 978-5-94588-149-5. von Karman Institute, Rhode Saint Genèse, Belgium. December.

[24] Paniagua G., Bhatnagar L., Rebassa A., 2022, “Aerothermal measurement techniques”. von Karman Institute Lecture Series on “Stability and Sensitivity Methods for Flow Control and Industrial Design”. ISBN 978-5-94588-149-5. von Karman Institute, Rhode Saint Genèse, Belgium. December.

[23] Schmitt J., Briggs T., Callahan T., Freund S., Kurz R., Neil A., Paniagua G., Sanchez D., 2022, “Heat Engines”. Chapter 4. pp 95-188. Hydrogen Economy Book. Edited by K. Brun and T. Allison. Elsevier. eBook ISBN: 9780323906609. Paperback ISBN: 9780323903943. https://doi.org/10.1016/C2020-0-03643-1.

[22] Braun J., Paniagua G., Ferguson D., 2022, “Rotating Detonation Combustor Downstream Transition Passage Design Considerations”. King R., Peitsch D. (eds) Active Flow and Combustion Control 2021. AFCC 2021. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, vol 152. Springer, Cham. https://doi.org/10.1007/978-3-030-90727-3_11. ISBN 978-3-030-90726-6.

[21] Braun J., Paniagua G., 2019, “Analysis of advanced turbine integration with rotating detonation combustors using a time-accurate reduced order model”. Advances in Pulsed and Continuous Detonations: Applications of Fast Combustion Modes and Detonations in Industry. pp 362-370. Edited by S. Frolov. ISBN 978-5-94588-244-7. Torus Pres. Moscow.

[20] Paniagua G., Saavedra J., Andreoli V., Gonzalez Cuadrado D., 2017, “Wind tunnel design”. von Karman Institute Lecture Series on “Introduction to Stability and Transition Analysis Methods”. ISBN-13 978-2-87516-124-6. von Karman Institute, Rhode Saint Genèse, Belgium. October.

[19] Braun J., Saracoglu B.H., Paniagua G., 2014, “Analysis of continuous detonation wave combustor outlet conditions”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[18] Paniagua G., Garcia-Galache J.P., Romero-Catala J.M., 2014, “Aerodesign methodology of a supersonic turbine for a pulse detonation engine”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[17] Sousa J., Martinez O., Paniagua G., 2014, “Supersonic flow turning in a channel exposed to fluctuating inlet conditions”. Transient combustion and detonation phenomena: Fundamentals and applications. Edited by S. Frolov. ISBN 978-5-94588-149-5. Torus Pres. Moscow.

[16] Fernandez Villacé V., Paniagua G., 2014, “Precooled air turbo–rocket engine”. Lecture Series STO-AVT-234 on “Hypersonic Flight Testing”, March, Rhode Saint Genèse, Belgium.

[15] Fernandez Villacé V., Paniagua G., 2012, “Modeling and Second Principle analysis of combined-cycle engines for high speed propulsion”. von Karman Institute Lecture Series on “Physics-Based Modeling & Simulation for Aerospace Systems”. Wright State University, USA. August. ISBN-13 978-2-87516-038-6.

[14] Paniagua G., 2012, “Use of detonation in propulsion”. von Karman Institute Lecture Series on “Combustion in Aero-Engines”. von Karman Institute, Rhode Saint Genèse, Belgium. June. ISBN-13 978-2-87516-036-2.

[13] Boyce R.R., Ogawa H., Grainger A.L., Tirtey S.C., Paniagua G., Paris S., 2011, “Experimental and numerical research on hypersonic inlet starting processes” RTO-AVT-VKI Lecture Series AVT 195 on “Engine Intake Aerothermal Design: Subsonic to High Speed Applications”, November, Rhode Saint Genèse, Belgium.

[12] Bottini H., Paniagua G., 2012, “Qualification of a supersonic test section in a compression tube wind tunnel”. Joly M., Verstraete T., Paniagua G., Cizmas P., “Accelerated optimization for a multi-disciplinary design of transonic and contra-rotating turbomachinery components”. Villafañe L., Paniagua G., Desantes J.M., “Aero-thermal analysis and characterization of fine wire thermocouple probes”. Fernandez-Villace V., Paniagua G., Montanez J.L., “Simulation of a variable-combined cycle engine for dual subsonic and supersonic cruise”. Review of the VKI Doctoral Research. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-031-7.

[11] Bottini H., Paniagua G., 2011, “Design and qualification of a supersonic wind tunnel for transition experiments”. Saracoglu B., Paniagua G., Huang G., “Turbine base pressure active control through trailing edge blowing”. Lavagnoli S., Paniagua G., Desantes J.M., “Accurate turbine blade tip clearance measurements in a short duration wind tunnel”. Villace V., Paniagua G., Montanes J.L., “Numerical modeling of a combined cycle for high speed propulsion”. Villafañe L., Paniagua G., Payri F., “Aerodynamic characterization of helicoidal fin arrays in transonic flow conditions”. Joly M., Verstraete M., Paniagua G., “Accelerated optimization for multi-disciplinary design of contra-rotating and transonic turbomachinery components”. Summaries of Doctoral candidates. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-018-8.

[10] Lavagnoli S., Paniagua G., Desantes J.M., 2010,“Interaction of an Innovative LP Stator Vane with a Transonic HP Turbine”. Villace V., Paniagua G., Montanes J.L., “Numerical simulation of the SABRE rocket based combined cycle engine”. Bottini H., Paniagua G., Degrez G., “Analysis of transition to turbulence of a supersonic flow over a rigid surface”. Villafañe L. , Paniagua G. , Arts T., Payri F., “Aerodynamic research on surface heat exchangers in the engine bypass flow”. Joly M., Verstraete T., Paniagua G., “Multi-disciplinary optimization for concurrent design of turbomachinery blades”. Summaries of Doctoral candidates. Edited by T. Magin, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-87516-011-9.

[9] Jivraj F., Varvill R., Bond, A., Paniagua, G., 2007, “The scimitar precooled Mach 5 engine”. Second European Conference for Aero-Space Sciences. Edited by M.L. Riethmuller, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-930389-27-3.

[8] Herbiet J.F., Paniagua G., Hendrick P., 2007, “Development of an analysis tool for combined propulsion cycles”. Second European Conference for Aero-Space Sciences. Edited by M.L. Riethmuller, von Karman Institute. Rhode Saint Genèse, Belgium. ISBN 978-2-930389-27-3. Paper 1-05-01.

[7] Dénos R. and Paniagua G., 2006, “Unsteadiness in HP Turbines”. von Karman Institute Lecture Series on “Advances in Turbomachinery Aero-Thermo-Mechanical Design and Analysis”. von Karman Institute LS 2007-02. ISBN-13 978-2-930389-71-0. Wright State University, USA.

[6] Paniagua G., Persico G., Billiard N., 2006, “Rotor-stator interactions in a one and a half turbine stage”. Turbomachines: Aeroelasticity, Aeroacoustics and Unsteady Aerodynamics. Edited by V. Skibin, V. Saren, N. Savin, S. Frolov. ISBN 5-94588-041-8. Torus Pres Ltd. Moscow.

[5] Dénos R. and Paniagua G., 2005, “Rotor/Stator interaction in Transonic HP Turbines”. von Karman Institute Lecture Series on “Effects of Aerodynamic Unsteadiness in Axial Turbomachines”. von Karman InstituteLS 2005-03. ISBN: 2-930389-59-1. Rhode Saint Genèse, Belgium.

[4] Paniagua G. and Dénos R., 2005, “Unsteady Temperature Measurements”. von Karman Institute Lecture Series on “Data Acquisition and Signal Processing for Turbomachinery Applications”. Rhode Saint Genèse, Belgium.

[3] Yasa T., Paniagua G. and Dénos R., 2005, “Hotwire Anemometry for Non-Isothermal Flows and Effect of “Aging” of the Sensor Wire”. von Karman Institute Lecture Series on “Data Acquisition and Signal Processing for Turbomachinery Applications”. Rhode Saint Genèse, Belgium.

[2] Paniagua G., 2002, “Investigation of the steady and unsteady performance of a transonic HP turbine”. von Karman Institute Doctoral Thesis. ISBN: 978-2-930389-45-1. Rhode Saint Genèse, Belgium.

[1] Sieverding C.H., Dénos R., Arts T., Brouckaert J.F., Paniagua G., 1998, “Experimental Investigation of the Unsteady Rotor Aerodynamics and Heat Transfer of a Transonic Turbine Stage”. von Karman Institute Lecture Series on “Blade Row Interference Effects in Axial Turbomachinery Stages”. von Karman InstituteLS 1998-02, D/1998/0238/451. Rhode Saint Genèse, Belgium.

Home Team Test Sections Wind Tunnels Test Cells Publications