LAMPL

PUBLICATIONS

HOME

CONTACT

RESEARCH

FACILITIES

PERSONNEL

PUBLICATIONS

 

Archival Publication

  • Grohol, C. and Shin, Y.C., Frank, A., "Laser Cladding of Aluminum Alloy 6061 with Cryogenic Quenching for Improved Microstructure and Hardness", Surface and Coatings Technology, Volume 439, 15 June 2022, 128460. https://doi.org/10.1016/j.surfcoat.2022.128460
  • Porro, M., Zhang, B., Parmar, A. and Shin, Y.C., "Data-driven Modeling of Mechanical Properties for 17-4 PH Stainless Steel Built by Additive Manufacturing", Integrating Materials and Manufacturing Innovation, 2022. https://doi.org/10.1007/s40192-022-00261-8
  • Elkhateeb, M. and Shin, Y.C., "A Microstructure-Based Extended Mechanics of Structure Genome for the Prediction of the Mechanical Behavior of Additively Manufactured Ti6Al4V Considering Porosity and Microstructure", Mechanics of Materials, Volume 169, June 2022, 104300. https://doi.org/10.1016/j.mechmat.2022.104300
  • Bailey, N. and Shin, Y.C., "Multi-track, Multi-layer Dendrite Growth and Solid Phase Transformation Analysis during Additive Manufacturing of H13 Using a Hybrid Cellular Automata/Phase Field model", International Journal of Advanced Manufacturing Technology, 120, pages 2089-2108 (2022). https://doi.org/10.1007/s00170-022-08901-1
  • Harinarayana, V. and Shin, Y.C., "Two-photon lithography for Three-Dimensional Fabrication in Micro/Nanoscale Regime: A Comprehensive Review", Optics and Laser Technology, Volume 142, October 2021, 107180. https://doi.org/10.1016/j.optlastec.2021.107180
  • Grohol, C., Shin, Y.C., Frank, A., "Laser Cladding of Aluminum Alloy 6061 via Off-Axis Powder Injection", Surface Coatings Technology, Volume 415, 15 June 2021, 127099. https://doi.org/10.1016/j.surfcoat.2021.127099
  • Hong, K.M., Grohol, C., Shin, Y.C., "Comparative Assessment of Physics-based Computational Models on the NIST Benchmark Study of Molten Pool Dimensions and Microstructure for Selective Laser Melting of Inconel 625", Integrating Materials and Manufacturing Innovation, 10, pages 58-71(2021). https://doi.org/10.1007/s40192-021-00201-y
  • Liu, S. and Shin, Y.C., "Thermodynamically Consistent Phase-Field Modeling of Competitive Polycrystalline Growth of Beta Grains during Additive Manufacturing of Ti6Al4V", J. of Crystal Growth, Volume 564, 15 June 2021, 126112. https://doi.org/10.1016/j.jcrysgro.2021.126112
  • Elkhateeb, M., Liu, S. and Shin, Y.C., "Analysis of the Effects of Microstructure Heterogeneity on the Mechanical Behavior of Additively Manufactured Ti6Al4V Using Mechanics of Structure Genome", Materials and Design, 2021, Volume 204, June 2021, 109643. https://doi.org/10.1016/j.matdes.2021.109643
  • Liu, S. and Shin, Y.C., "A Novel 3D Cellular Automata-Phase Field Model for Computationally Efficient Prediction of Dendrite Formation during Solidification in a Large Domain", Computational Material Science, Volume 192, May 2021, 110405.  https://doi.org/10.1016/j.commatsci.2021.110405
  • Katinas, C., Throop, T., Shin, Y.C., Frank, A. "Laser Cladding of Stellite-6 with a Coaxial Nozzle via Modeling and Systematic Experimental Investigations", International Journal of Advanced Manufacturing Technology, 113, pages 837-853(2021).  https://doi.org/10.1007/s00170-021-06624-3
  • Shin, Y.C., Wu, B., Lei, S., Cheng, G., Yao, Y., "Overview of Laser Applications in Manufacturing and Materials Processing in Recent Years", Trans. of ASME, Journal of Manufacturing Science and Engineering Nov 2020, 142(11): 110818.  https://doi.org/10.1115/1.4048397
  • Liu, S. and Shin, Y.C., "An Integrated Multi-Scale Simulation Framework for Solidification and Microstructure Evolution during Additive Manufacturing of Ti6Al4V", J. of Computational Material Science, Volume 183, October 2020, 109889.  https://doi.org/10.1016/j.commatsci.2020.109889
  • Liu, S. and Shin, Y.C., "Prediction of 3D Microstructure and Phase Distributions of Ti6Al4V Built by the Directed Energy Deposition Process via Combined Multi-Physics Models", Additive Manufacturing, 2020. https://doi.org/10.1016/j.addma.2020.101234
  • Katinas, C. and Shin, Y.C., "Prediction of Initial Transient Behavior with stationary heating during Laser Powder Bed Fusion Processes", International Journal of Heat and Mass Transfer, Volume 153, June 2020, 119663.  https://doi.org/10.1016/j.ijheatmasstransfer.2020.119663
  • Zhang, B., Hong, K.M., and Shin, Y.C., "Deep-Learning-Based Porosity Monitoring of Laser Welding Process", Manufacturing Letters, Volume 23, January 2020, Pages 62-66. https://doi.org/10.1016/j.mfglet.2020.01.001
  • Lei, S., Zhao, X., Yu, X., Hu, A., Vukelic, S., Jun, M.B.G., Joe, H.E., Yao, Y.L. and Shin, Y.C., "Ultrafast Laser Applications in Manufacturing Processes: A State of the Art Review" Trans. of the ASME, Journal of Manufacturing Science and Engineering, Mar 2020, 142(3): 031005. https://doi.org/10.1115/1.4045969
  • Bailey, N., Hong, K.M. and Shin, Y.C., "Comparative Assessment of Dendrite Growth and Microstructure Predictions during Laser Welding of Al 6061 via 2D and 3D Phase Field Models", Computational Material Science. Vol. 172, 109291, 2020.  https://doi.org/10.1016/j.commatsci.2019.109291
  • Liu, S., Hong, K.M., Katinas, C. and Shin, Y.C., "Multiphysics Modeling of Phase Transformation in Laser Direct Deposited Ti6Al4V", Journal of Manufacturing Processes, Volume 45, September 2019, Pages 579-587. https://doi.org/10.1016/j.jmapro.2019.07.027
  • Zhang, B., Liu, S., and Shin, Y.C., "In-Process Monitoring of Porosity During Laser Additive Manufacturing Process", Additive Manufacturing, Vol. 28, August 2019, pp. 497-505.  https://doi.org/10.1016/j.addma.2019.05.030
  • Liu, S., Dhiman, A., Shin, Y.C., Tomar, V., Zhang, S.T. "In-situ synthesis of Zr-based bulk metallic glass composites with periodic amorphous-crystalline microstructure for improved ductility via laser direct deposition", Intermetallics, Volume 111, August 2019, 106503. https://doi.org/10.1016/j.intermet.2019.106503
  • Xu, H., Guo, X., Lei, Y., Fu, H., Xiao, R., Huang, T. and Shin, Y.C., "Welding deformation of ultra-thin 316 stainless steel plate using pulsed laser welding process", Optics and Laser Technology, Volume 119, November 2019, 105583. https://doi.org/10.1016/j.optlastec.2019.105583
  • Pellone, L., Inamke, G., Hong, K.M. and Shin, Y.C., "The Effects of Interface Gap and Shielding Gas on the Welding Quality During Fiber Laser Lap Welding of AA6061-T6", Journal of Materials Processing Technology. Volume 268, June 2019, Pages 201-212 https://doi.org/10.1016/j.jmatprotec.2019.01.025
  • Ning, J., Hong, K.M., Inamke, G., Shin, Y.C., Zhang, L. "Analysis of Microstructure and Mechanical Strength of Lap Joints of TZM Alloy Welded by a Fiber Laser", Journal of Manufacturing Processes. Volume 39, March 2019, Pages 146-159. https://doi.org/10.1016/j.jmapro.2019.02.015.
  • Lee, J.W. and Shin, Y.C., "Effects of Composition and Post Heat Treatment on Shape Memory Characteristics and Mechanical Properties for Laser Direct Deposited Nitinol", Lasers in Manufacturing and Materials Processing, March 2019, Volume 6, Issue 1, pp 41-58.  DOI: 10.1007/s40516-019-0079-5
  • Elkhateeb, M. and Shin, Y.C., "Investigation of Machining Behavior Ti6Al4V/TiC Composites during Conventional and Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2019, 141(5), 051001 (Mar 04, 2019). doi:10.1115/1.4042608
  • Liu, S. and Shin, Y.C., "Additive Manufacturing of Ti6Al4V Alloy: A Review", Materials and Design, Volume 164, 15 February 2019, 107552. https://doi.org/10.1016/j.matdes.2018.107552
  • Pachaury, Y. and Shin, Y.C., "Assessment of Sub-Surface Damage During Machining of Additively Manufactured Fe-TiC Metal Matrix Composites", Journal of Materials Processing Technology, Volume 266, April 2019, Pages 173-183.  https://doi.org/10.1016/j.jmatprotec.2018.11.001
  • Katinas, C., Liu, S., Shin, Y.C., "Self-Sufficient Modeling of Single Track Deposition of Ti-6Al-4V with the Prediction of Capture Efficiency", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Jan. 2019, Vol. 141, 011001.  doi:10.1115/1.4041423. doi:10.1115/1.4041423
  • Liu, S. and Shin, Y.C., "Simulation and Experimental Studies on Microstructure Evolution of Resolidified Dendritic TiCx in Laser Direct Deposited Ti-TiC Composite", Materials and Design, Volume 159, 5 December 2018, Pages 212-223.  https://doi.org/10.1016/j.matdes.2018.08.053
  • Parmar, V. and Shin, Y.C., "Wideband Anti-Reflective Silicon Surface Structures Fabricated by Femtosecond Laser Texturing", Applied Surface Science, Volume 459, 30 November 2018, Pages 86-91. https://doi.org/10.1016/j.apsusc.2018.07.189
  • Liu, Z., Wu, B., Xu, R., Zhao, K., Shin, Y.C., "Microhole Drilling by Double Laser Pulses with Different Pulse Energies",  Trans. of the ASME, Journal of Manufacturing Science and Engineering, September 2018, Vol. 140 / 091015.  doi:10.1115/1.4040483
  • Wei, S., Wang, G., Shin, Y.C., and Rong, Y., "Comprehensive Modeling of Transport Phenomena in Laser Hot-wire Deposition Process", International Journal of Heat and Mass Transfer.  Volume 125, October 2018, Pages 1356-1368. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.164
  • Shin, Y.C., Bailey, N., Katinas, C., Tan, W., "Predictive Modeling Capabilities from Incident Powder and Laser to Mechanical Properties for Laser Directed Energy Deposition", Computational Mechanics, May 2018, Volume 61, Issue 5, pp 617-636.   https://doi.org/10.1007/s00466-018-1545-1
  • Ai, Y., Zheng, K., Shin, Y.C., Wu, B.  "Analysis of Weld Geometry and Liquid Flow in Laser Transmission Welding Between PET and Ti6Al4V Based on Numerical Simulation", Laser and Optics Technology, Volume 103, July 2018, Pages 99-108.  10.1016/j.optlastec.2018.01.022
  • Liu, Z., Wu, B., Samata, A., Shen, N., Ding, H. and Shin, Y.C., "Manufacturing of Hourglass-Shaped Through Holes with Varying Diameters at Different Depths by Dual-Pulse Laser Drilling and Laser-Induced Plasma-Hole Interaction", Manufacturing Letters, Volume 16, April 2018, Pages 18-22.  https://doi.org/10.1016/j.mfglet.2018.02.007
  • Katinas, C., Shang, W., Shin, Y.C., Chen, J. "Modeling Particle Spray for Direct Laser Deposition Using a Four Nozzle Powder Injection System", Trans. of the ASME, Journal of Manufacturing Science and Engineering. 140(4), 2018, 041014.  doi: 10.1115/1.4038997
  • Liu, S. and Shin, Y.C., "The Influences of Melting Degree of TiC Reinforcements on Microstructure and Mechanical Properties of Laser Direct Deposited Ti6Al4V-TiC Composites", Materials and Design, Volume 136, 15 December 2017, Pages 185-195.  https://doi.org/10.1016/j.matdes.2017.09.063
  • Zhang, S.J. and Shin, Y.C., "Effective Methods for Fabricating Trapezoidal Shape Microchannel of Arbitrary Dimensions on Polymethyl Methacrylate (PMMA) Substrate by A CO2 Laser", International Journal of Advanced Manufacturing Technology. October 2017, Volume 93, Issue 1-4, pp 1079-1094.  10.1007/s00170-017-0445-4.
  • Hong, K.M. and Shin, Y.C., "Investigation on Weld Pool Dynamics in Laser Welding of AISI 304 Stainless Steel with An Interface Gap via A Three-Dimensional Dynamic Model And Experiments", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2017;139(8):081008-081008-10.  doi:10.1115/1.4036521.
  • Bailey, N.S., Katinas, C. and Shin, Y.C., "Laser Direct Deposition of AISI H13 Tool Steel Powder with Numerical Modeling of Solid Phase Transformation, Hardness, and Residual Stresses", Journal of Materials Processing Technology.  Volume 247, September 2017, Pages 223-233.  http://doi.org/10.1016/j.jmatprotec.2017.04.020
  • Sarbada, S. and Shin, Y.C., "Superhydrophobic Metal and Polymer Surfaces Created using a Femtosecond Laser", Applied Surface Science, 405 (2017) 465-475.  http://dx.doi.org/10.1016/j.apsusc.2017.02.019
  • Hong, K.M. and Shin, Y.C., "Prospects of Laser Welding Technology in the Automotive Industry: A Review", Journal of Materials Processing Technology, Volume 245, July 2017, Pages 46-69.  DOI: http://dx.doi.org/10.1016/j.jmatprotec.2017.02.008
  • Hong, K.M. and Shin, Y.C., "The Effects of Interface Gap on Weld Strength During Overlapping Fiber Laser Welding of AISI 304 Stainless Steel and AZ31 Magnesium Alloys", International Journal of Advanced Manufacturing Technology, June 2017, Volume 90, Issue 9, pp 3685-3696. http://link.springer.com/article/10.1007/s00170-016-9681-2
  • Dong, X. and Shin, Y.C., "Improved Machinability of SiC/SiC Ceramic Matrix Composite via Laser-assisted Micromachining", International Journal of Advanced Manufacturing Technology, April 2017, Volume 90, Issue 1, pp 731-739.  DOI: 10.1007/s00170-016-9415-5
  • Ngo, P.D. and Shin, Y.C., "Modeling and Robust Controlling of Laser Welding Process on High Strength Titanium Alloy Using Fuzzy Basis Function Networks and Robust Takagi Sugeno Fuzzy Controller", International Journal of Advanced Manufacturing Technology, 89(1), 1089-1102, 2017. http://link.springer.com/article/10.1007/s00170-016-9104-4
  • Hong, K.M. and Shin, Y.C., "Analysis of Microstructure and Mechanical Properties Change in Laser Welding of Ti6Al4V with A Multiphysics Prediction Model", Journal of Materials Processing and Technology, Volume 237, November 2016, Pages 420-429. doi:10.1016/j.jmatprotec.2016.06.034
  • Sarbada, S., Huang, Z., Shin, Y.C. and, Ruan, X., "Low Reflectance Laser Induced Periodic Surface Structures Created by a Picosecond Laser", Applied Physics A, (2016), 122:453.  DOI :10.1007/s00339-016-0004-0
  • Dabir Moghaddam, N., Tao, S., Wu, B., and Shin, Y.C., "Modeling of Picosecond Laser-induced Plasma Amplification inside a Microhole and an Implied Novel Technology to Drill Microholes with Varying Diameters with Depth", Manufacturing Letter, Volume 7, Pages 1-5, January 2016.   doi:10.1016/j.mfglet.2015.11.004
  • Dong, X. and Shin, Y.C., "Multi-scale Modeling of Alumina Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 138(1), 011004, 2016. doi:10.1115/1.4029858
  • Cao, Y. and Shin, Y.C., "Multi-scale Modeling of Phase Explosion in High Fluence Nanosecond Laser Ablation and Clarification of Ablation Depth Prediction Criterion", Applied Surface Science, 357 (2015), pp. 74-85.  doi:10.1016/j.apsusc.2015.08.251
  • Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C.B., Wang, C.L., Shin, Y.C., Zhang, S., Zavattieri, P.D., "The Status, Challenges, and Future of Additive Manufacturing in Engineering",  Computer-Aided Design, Volume 69, December 2015, Pages 65-89. 10.1016/j.cad.2015.04.001
  • Luo, M. and Shin, Y.C., "Estimation of Keyhole Geometry and Prediction of Welding Defects Based on a Visual System and a Radial Basis Function Neural Network", International Journal of Advanced Manufacturing Technology, Volume 81, Issue 1 (2015), Page 263-276. DOI: 10.1007/s00170-015-7079-1
  • Dong, X. and Shin, Y.C., "Multi-scale Modeling of Alumina Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 138(1), 011004, 2016.  doi:10.1115/1.4029858
  • Ye, X., Bae, H., Shin, Y.C. and Stanciu, L., "In Situ Synthesis and Characterization of Zr-Based Amorphous Composite by Laser Direct Deposition", Metallurgical and Materials Transaction, A, September 2015, Volume 46, Issue 9, pp 4316-4325.  DOI :10.1007/s11661-015-3047-5
  • Hedberg, G. and Shin, Y.C., "Laser Assisted Milling of Ti-6Al-4V ELI with the Analysis of Surface Integrity and its Economics", Lasers in Manufacturing and Materials Processing, Vol.2, Issue 3, pp. 164-185, 2015.  DOI: 10.1007/s40516-015-0013-4
  • Nian, Q., Zhang, M.Y., Lin, D., Das, S., Shin, Y.C. and Cheng, G.J. "Crystalline Photoactive Copper Indium Diselenide Thin Films by Pulsed Laser Crystallization of Nanoparticle-Inks at Ambient Conditions", RSC Advances, 2015, 5, 57550-57558.  DOI: 10.1039/C5RA09718E   
  • Cao, Y., Xie, X., Antonaglia, J., Winiarski, B., Wang, G., Shin, Y.C., Withers, P.J., Dahmen, K.A. and Liaw, P.K., "Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling", Scientific Reports 5, 10789, 2015. doi:10.1038/srep10789
  • Zhao, X. and Shin, Y.C., "Laser-Plasma Interaction and Plasma Enhancement by Ultrashort Double-Pulse Ablation", Applied Physics B, July 2015, Volume 120, Issue 1, pp 81-87.  DOI: 10.1007/s00340-015-6102-4
  • Hedberg, G., Shin, Y.C. and Xu, L., "Laser-assisted Milling of Ti-6Al-4V with the Consideration of Surface Integrity", International Journal of Advanced Manufacturing Technology, August 2015, Volume 79, Issue 9-12, pp 1645-1658.   DOI 10.1007/s00170-015-6942-4
  • Tan, W. and Shin, Y.C., "Laser Keyhole Welding of Stainless Steel Thin Plate Stack towards Applications in Fuel Cell Manufacturing", Science and Technology of Welding and Joining, 2015, Vol. 20, No. 4, 2015, pp. 313-318. http://dx.doi.org/10.1179/1362171815Y.0000000005
  • Luo, M. and Shin, Y.C., "Vision-based Weld Pool Boundary Extraction and Width Measurement during Keyhole Fiber Laser Welding", Optics and Lasers in Engineering, Volume 64, January 2015, Pages 59-70.  Doi: 10.1016/j.optlaseng.2014.07.004
  • Dong, X. and Shin, Y.C., "Coupled Thermo-mechanical Multi-scale Modeling of Alumina to Predict Thermally Induced Fractures under Laser Heating", Journal of the American Ceramic Society, Volume 98, Issue 3, pages 920-928, March 2015.  Doi:10.1111/jace.13349
  • Tan, W. and Shin, Y.C., "Multi-scale Modeling of Solidification and Microstructure Development in Laser Keyhole Welding Process for Austenitic Stainless Steel", Computational Material Science, Volume 98, 15 February 2015, Pages 446-458.  Doi:10.1016/j.commatsci.2014.10.063
  • Bailey, N., Tan, W. and Shin, Y.C., "A Parametric Study on Laser Welding of Magnesium Alloy AZ31 by A Fiber Laser", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 137, 041003, 2015.   doi:10.1115/1.4029052
  • Zhao, X. and Shin, Y.C., "Ablation Enhancement of Silicon by Ultrashort Double-Pulse Laser Ablation", Applied Physics Letters, 105, 111907 (2014). http://dx.doi.org/10.1063/1.4896350
  • Tan, W. and Shin, Y.C., "Analysis of Multi-Phase Interaction and Its Effect on Keyhole Dynamics with A Multi-Physics Numerical Model" Journal of Physics, Applied Physics D, 47 (2014) 345501. doi:10.1088/0022-3727/47/34/345501
  • Wilson, J.M., Piya, C., Shin, Y.C., Zhao, F. and Ramani, R., "Remanufacturing of Turbine Blades by Laser Direct Deposition with Its Energy and Environmental Impact Analysis", Journal of Cleaner Production, Volume 80, 1 October 2014, Pages 170-178.  DOI: 10.1016/j.jclepro.2014.05.084
  • Tian, Y., Kwon, H.J., Shin, Y.C. and King, G.B., "Fabrication and Characterization of Photonic Crystals by Two-Photon Polymerization Using a Femtosecond Laser", Trans. of the ASME, Journal of Micro and Nano-Manufacturing, 2(3), 034501, Sept., 2014. doi:10.1115/1.4027737
  • Zhao, X., Cao, Y., Nian, Q., Cheng, G. and Shin, Y.C., "Control of Ablation Depth and Surface Structure in P3 Scribing of Thin-Film Solar Cells by A Picosecond Laser", Trans. of the ASME, Journal of Micro and Nano Manufacturing, 2(3), 031007, Sept., 2014. doi:10.1115/1.4027733
  • Zhao, X., Cao, Y., Shin, Y.C., Cheng, G. and Nian, Q. "Precise Selective Scribing of Thin Film Solar Cells by A Picoseconds Laser", Applied Physics A, August 2014, Volume 116, Issue 2, pp 671-681.  DOI : 10.1007/s00339-014-8330-6
  • Ye, X. and Shin, Y.C., "Synthesis and Characterization of Fe-Based Amorphous Composite by Laser Direct Deposition", Surface and Coatings Technology, Volume 239, 25 January 2014, Pages 34-40. http://dx.doi.org/10.1016/j.surfcoat.2013.11.013
  • Zhao, X. and Shin, Y.C., "Ablation Dynamics of Silicon by Femtosecond Laser and the Role of Early Plasma", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 135(6), 061015, 2013. doi:10.1115/1.4025805.
  • Zhao, X. and Shin, Y.C., "Coulomb Explosion and Early Plasma Generation during Femtosecond Laser Ablation of Silicon at High Laser Fluence", Journal of Physics D, Applied Physics, 46(33), 335501, 2013. doi:10.1088/0022-3727/46/33/335501
  • Zhao, X. and Shin, Y.C., "Femtosecond Laser Ablation of Aluminum in Vacuum and Air at High Laser Intensity", Applied Surface Science, Volume 283, 15 October 2013, Pages 94-99.  http://dx.doi.org/10.1016/j.apsusc.2013.06.037.
  • Zhang, M.Y., Nian, Q., Shin, Y, Cheng, G.Y. "Direct Pulsed Laser Crystallization of Nanocrystals for Absorbent Layers in Photovoltaics: Multiphysics Simulation and Experiment", Journal of Applied Physics, 113 (19), 193506 (2013). http://dx.doi.org/10.1063/1.4805039
  • Cao, Y., Zhao, X. and Shin, Y.C., "Analysis of Nanosecond Laser Ablation of Aluminum With and Without Phase Explosion in Air and Water" Journal of Laser Applications, Vol.  25, Issue 3, 032002 (2013). http://dx.doi.org/10.2351/1.4794032.
  • Wilson, J.M., Jones, N., Jin, L. and Shin, Y.C., "Laser Deposited Gradient Coatings of Co-Cr-Mo onto Ti-6Al-4V and SS316L Substrates for Biomedical Applications", Journal of Biomedical Materials Research Part B: Applied Biomaterials, Volume 101, Issue 7, pages 1124-1132, October 2013.. DOI: 10.1002/jbm.b.32921
  • Cao, Y., Shin, Y.C. and Pipes, B.R., "Etching of Long Fiber Polymeric Composite Materials by Nanosecond Laser Induced Water Breakdown Plasma" Applied Surface Science, Volume 268, 1 March 2013, Pages 6-10.  http://dx.doi.org/10.1016/j.apsusc.2012.11.061
  • Tan, W., Bailey, N. and Shin, Y.C., "Investigation of Keyhole Plume and Molten Pool Based on A Three-Dimensional Dynamic Model with Sharp Interface Formulation", Journal of Physics D: Applied Physics, Volume 46, Number 5, 6 February 2013, 055501. doi:10.1088/0022-3727/46/5/055501
  • Dandekar, C.R. and Shin, Y.C., "Multi-scale Modeling of Subsurface Damage in Laser-assisted Machining of Particulate Reinforced Metal Matrix Composite", Journal of Materials Processing Technology, Vol. 213, Issue 2, February 2013, Pages 153-160. http://dx.doi.org/10.1016/j.jmatprotec.2012.09.010
  • Halani, P., Kaya, I., Shin, Y.C., Karaca, H.E. "Phase Transformation Characteristics and Mechanical Properties of Nitinol Synthesized by Laser Direct Deposition", Materials Science and Engineering, A. Volume 559, 1 January 2013, Pages 836-843. http://dx.doi.org/10.1016/j.msea.2012.09.031
  • Dandekar, C.R. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Machining of Silicon Carbide Particle Reinforced Aluminum Matrix Composites", International Journal of Advanced Manufacturing Technology, Volume 66, Issue 9 (2013), Page 1603-1610. DOI: 10.1007/s00170-012-4443-2
  • Ding, H. and Shin, Y.C., "Improving Machinability of High Chromium Wear Resistant Materials via Laser-assisted Machining", Machining Science and Technology, 2013, 17:2, 246-269. http://dx.doi.org/10.1080/10910344.2013.780549
  • Ding, H. and Shin, Y.C., "Improvement of Machinability of Waspaloy via Laser-assisted Machining", International Journal of Advance Manufacturing Technology, 2013, 17:2, 246-269. DOI: 10.1007/s00170-012-4012-8
  • Wilson, J.M. and Shin, Y.C., "Microstructure and Wear Properties of Laser-deposited Functionally Graded Inconel 690 Reinforced with TiC", Surface Coatings and Technology, Vol. 207, 25 August 2012, Pages 517-522. Doi: 10.1016/j.surfcoat.2012.07.058
  • Hu, W., Shin, Y.C. and King, G.B., "Characteristics of Plume Plasma and Its Effects on Ablation Depth during Ultrashort Laser Ablation of Copper in Air", Journal of Physics D: Applied Physics, 45, 355204, 2012. doi:10.1088/0022-3727/45/35/355204
  • Zhao, X. and Shin, Y.C., "A Two-dimensional Comprehensive Hydrodynamic Model for Femtosecond Laser Pulse Interaction with Metals", Journal of Physics D: Applied Physics, 45 105201, 2012. doi:10.1088/0022-3727/45/10/105201
  • Ding, H., Shen, N. and Shin, Y.C., "Thermal and Mechanical Modeling Analysis of Laser-assisted Micro Milling of Difficult-to-machine Alloys", Journal of Materials Processing Technology, Volume 212, Issue 3, March 2012, Pages 601-613. http://www.sciencedirect.com/scidirimg/clear.gifdoi:10.1016/j.jmatprotec.2011.07.016
  • Halani, P. and Shin, Y.C., "In-situ Synthesis and Characterization of Shape Memory Alloy- Nitinol by Laser Direct Deposition", Metallurgical and Materials Transactions, A. Volume 43, Number 2, 2012, 650-657. DOI: 10.1007/s11661-011-0890-x
  • Ding, H. and Shin, Y.C., "Dislocation Density-Based Modeling of Subsurface Grain Refinement with Laser-Induced Shock Compression", Computational Materials Science, Volume 53, Issue 1, February 2012, Pages 79-88. http://dx.doi.org/10.1016/j.commatsci.2011.08.038
  • Hu, W., Shin, Y.C. and King, G.B., "Effect of Air Breakdown with a Focusing Lens on Ultrashort Laser Ablation", Applied Physics Letter, 99, 234104 (2011). doi:10.1063/1.3665631.
  • Hu, W., Shin, Y.C. and King, G.B., "Early-state Plasma Dynamics with Air Ionization during Ultrashort Laser Ablation of Metal", Physics of Plasmas, 18, 093302 (2011). doi:10.1063/1.3633067.
  • Wen, S. and Shin, Y.C., "Modeling of Transport Phenomena in Direct Laser Deposition of Metal Matrix Composite", International Journal of Heat and Mass Transfer, Volume 54, Issues 25-26, December 2011, Pages 5319-5326. https://engineering.purdue.edu/ManLab/publications_files/image004.gifdoi:10.1016/j.ijheatmasstransfer.2011.08.011
  • Tan, W., Wen, S., Bailey, N. and Shin, Y.C. "Multi-scale Modeling of Transport Phenomena and Dendritic Growth in Diode Laser Cladding Process", Metallurgical and Materials Transactions B, Volume 42, Issue 6 (2011), Page 1306-1318. DOI: 10.1007/s11663-011-9545-y
  • Tan, W., Bailey, N. and Shin, Y.C., "A Novel Integrated Model Combining Cellular Automata and Phase Field Methods for Microstructure Evolution during Solidification of Multi-Component and Multi-Phase Alloys", Computational Materials Science. https://engineering.purdue.edu/ManLab/publications_files/image004.gifVol. 50, Issue 9, July 2011, Pages 2573-2585 doi:10.1016/j.commatsci.2011.03.044
  • Wen, S. and Shin, Y.C., "Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes", Journal of Laser Applications, 23, 022003 (2011). doi:10.2351/1.3567962.
  • Zhao, X. and Shin, Y.C., "Femtosecond Laser Drilling of High Aspect Ratio Microchannels in Glass", Applied Physics A, Volume 104, Number 2, 713-719, 2011. DOI: 10.1007/s00339-011-6326-z
  • Wen, S. and Shin, Y.C. "Modeling of the Laser Direct Deposition Process by a High Power Direct Diode Laser", Trans. of the ASME, J. of Heat Transfer, Volume 133, Issue 3, 031007, March 2011. doi:10.1115/1.4002447
  • Davis, T. and Shin, Y.C., "Vision-Based Clad Height Measurement", Machine Vision and Applications, Vol. 22, No. 1, pp. 129-136, 2011. DOI: 10.1007/s00138-009-0240-9.
  • Cao, Y., Shin, Y.C. and Wu, B., "A Parametric Study on Overlapping Laser Shock Peening of 4140 Steel via Modeling and Experiments", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 132, Issue 6, December 2010, 061010. doi:10.1115/1.4002850
  • Hu, W., Shin, Y.C. and King, G.B., "Energy Transport Analysis in Ultra-Short Pulse Laser Ablation through Combined Molecular Dynamics and Monte Carlo Simulation", Physical Review B, 2010, 82, 094111, 2010. doi:10.1103/PhysRevB.82.094111.
  • Wen, S. and Shin, Y.C. "Modeling of Transport Phenomena during the Coaxial Laser Direct Deposition Process", Journal of Applied Physics, 108, 044908 (2010). doi:10.1063/1.3474655.
  • Cao, Y. and Shin, Y.C., "Shock Wave Propagation and Spallation Study in Laser Shock Peening", Trans. of the ASME, Journal of Engineering Materials and Technology, 2010, Vol. 132, Issue 4, 041005, October 2010. doi:10.1115/1.4002048
  • Dandekar, C. and Shin, Y.C., "Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite", Trans. of the ASME, J. of Manuf. Science and Engineering, 2010, Volume 132, Issue 6, 061004, 2010. doi:10.1115/1.4002548
  • Shelton, J.A. and Shin, Y.C., "Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration", Journal of Micromechanics and Microengineering, Vol. 20, No.7, 075012, 2010. doi: 10.1088/0960-1317/20/7/075012
  • Shelton, J.A. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Micro-Milling in a Slotting Configuration", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 2, 021008, April, 2010. http://dx.doi.org/10.1115/1.4001142
  • Hu, W., Shin, Y.C. and King, G.B., "Micromachining of Metals, Alloys and Ceramics by Picosecond Laser Ablation", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 1, 011009, February 2010.  doi:10.1115/1.4000836.
  • Dandekar, C. and Shin, Y.C., "Machinability Improvement of Ti6Al4V Alloy via LAM and Hybrid Machining", International Journal of Machine Tools and Manufacture, Volume 50, Issue 2, Pages 174-182, February 2010. doi:10.1016/j.ijmachtools.2009.10.013.
  • Hu, W., Shin, Y.C. and King, G.B., "Multi-burst Mode Pico-Second Laser Ablation for Improved Material Removal Rate", Applied Physics, A, Volume 98, Number 2, Pages 407-415, February, 2010. DOI: 10.1007/s00339-009-5405-x.
  • Ding, H. and Shin, Y.C., "Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis", International Journal of Machine Tools and Manufacture, Volume 50, Issue 1, January 2010, Pages 106-114. doi:10.1016/j.ijmachtools.2009.09.001   
  • Wen, S., Shin, Y.C., Murthy, J.Y. and Sojka, P.E., "Modeling of Coaxial Powder Flow for the Laser Direct Deposition Process", International J. of Heat and Mass Transfer, 52, Issues 23-24, 5867-5877 (2009). http://www.sciencedirect.com/scidirimg/clear.gifdoi:10.1016/j.ijheatmasstransfer.2009.07.018.
  • Wu, B. and Shin, Y.C., "A Simplified Model for High Fluence Ultra-short Pulsed Laser Ablation of Semiconductors and Dielectrics", Applied Surface Science, Volume 255, Issue 9, 4996-5002, February 2009. doi:10.1016/j.apsusc.2008.12.051
  • Bailey, N., Tan, W. and Shin, Y.C., "Predictive Modeling and Experimental Results for Residual Stresses in Laser Hardening of AISI 4140 Steel by a High Power Diode Laser", Surface and Coatings Technology, Volume 203, Issue 14, 15, pages 2003-2012, April 2009. doi:10.1016/j.surfcoat.2009.01.039    
  • Truesdale, S. and Shin, Y.C., "Microstructural Analysis and Machinability Improvement of Udimet 720 via Cryogenic Milling", International Journal of Machining Science and Technology, Volume 13, Issue 1 January 2009 , pages 1 - 19. DOI: 10.1080/10910340902776010
  • Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride and Inconel 718", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031013, June, 2008. http://dx.doi.org/10.1115/1.2927447
  • Lakhkar, R., Shin, Y.C. and Krane, M., "Predictive Modeling of Multi-Track Laser Hardening of AISI 4140 steel" Materials Science and Engineering, A, 480, pp. 209-217, 2008. http://www.sciencedirect.com/scidirimg/clear.gifdoi:10.1016/j.msea.2007.07.054    
  • Wu, B., Shin, Y.C., Pakhal, H., Laurendeau, N.M. and Lucht, R.P., "Modeling of the Plasma Induced by High-Power Nanosecond Laser-Metal Interactions in Air and Its Experimental Verification" Physical Review E, 76, 026405, 2007. http://link.aps.org/doi/10.1103/PhysRevE.76.026405
  • Wu, B., and Shin, Y.C., "A Simple Two-Stage Model for the Formation and Expansion of the Plasma Induced by High Intensity Laser Metal Ablation in Vacuum", Physics Letters A, 371, pp. 128-134, 2007. http://www.sciencedirect.com/scidirimg/clear.gifdoi:10.1016/j.physleta.2007.01.096    
  • Tian, Y. and Shin, Y.C., "Thermal Modeling and Experimental Evaluation of Laser-assisted Dressing of Superabrasive Grinding Wheels", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 221(4), pp. 605-616, 2007. doi:10.1243/09544054JEM713
  • Wu, B., and Shin, Y.C., "Two-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening", J. of Applied Physics. 101, 103514, 2007. http://link.aip.org/link/?JAPIAU/101/103514/1
  • Tian, Y. and Shin, Y.C., "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 287-295, 2007. http://dx.doi.org/10.1115/1.2673595
  • Hahn, J.D., Shin, Y.C. and Krane, M., "Laser Transformation Hardening of Ti6Al4V in the Solid State with an Accompanying Kinetic Model" Surface Engineering, Vol. 23, No. 2, pp. 78-82, 2007. 10.1179/174329407X169467
  • Wu, B., and Shin, Y.C., "A Simple Model for High Fluence Ultra-short Pulsed Laser Metal Ablation", Applied Surface Science, 253, pp. 4079-4084, 2007. https://engineering.purdue.edu/ManLab/publications_files/image005.gifdoi:10.1016/j.apsusc.2006.09.007  
  • Wu, B. and Shin, Y.C., "From Incident Laser Pulse to Residual Stress: A Complete and Self-closed Model for Laser Shock Peening", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 117-125, 2007. doi:10.1115/1.2386180
  • Patwa, R. and Shin, Y.C., "Laser Hardening of AISI5150H Steels", International Journal of Machine Tools and Manufacture, Vo. 47, No. 2, pp. 307-320, February 2007. doi:10.1016/j.ijmachtools.2006.03.016
  • Wu, B., and Shin, Y.C., "A Self-Closed One-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening", J. of Applied Physics, 101, No. 2, 023510, 2007. doi:10.1063/1.2426981
  • Tian, Y. and Shin, Y.C., "Laser-assisted Burnishing", International Journal of Machine Tools and Manufacture, Volume 47, Issue 1, Pages 14-22, January 2007. doi:10.1016/j.ijmachtools.2006.03.002
  • Anderson, M. and Shin, Y.C., "Laser-assisted Machining of P550 with an Economic Analysis", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 12, pp. 2055-2067, 2006. doi: 10.1243/09544054JEM562
  • Skvarenina, S., and Shin, Y.C., "Predictive Modeling of Laser Hardening of Complex Surfaces", Surface and Coatings Technology, Volume 201, Issue 6, pp. 2256-2269, December 2006. doi:10.1016/j.msea.2007.07.054
  • Tian, Y. and Shin, Y.C., "Laser-assisted Machining of Silicon Nitride with Complex Geometric Features via In-process Control", Journal of the American Ceramic Society, Vol. 89, issue 11, pp. 3397-3405, 2006. doi: 10.1111/j.1551-2916.2006.01265.x
  • Wu, B., and Shin, Y.C., "Absorption Coefficient of Aluminum near the Critical Temperature and the Consequences on High Power Nanosecond Laser Ablation", Applied Physics Letters, 89, 111902, 2006. doi:10.1063/1.2352804
  • Anderson, M., Patwa, R. and Shin, Y.C., "Laser-assisted Machining of Inconel 718 with an Economic Analysis", International Journal of Machine Tools and Manufacture, 46, pp. 1879-1891, Nov. 2006. doi:10.1016/j.ijmachtools.2005.11.005
  • Tian, Y. and Shin, Y.C., " Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 425-434, May 2006. http://dx.doi.org/10.1115/1.2118748
  • Wu, B. and Shin, Y.C., "Modeling of Nanosecond Laser Ablation with Vapor Plasma Formation", Journal of Applied Physics, 99, 084310, 2006. doi:10.1063/1.2190718
  • Wu, B. and Shin, Y.C., "Laser Pulse Transmission through the Water Breakdown Plasma in Laser Shock Peening", Applied Physics Letters, 88, 041116, 2006. doi:10.1063/1.2168022
  • Skvarenina, S. and Shin, Y.C., "Laser-assisted machining of Compacted Graphite Iron with Microstructural Analysis", International Journal of Machine Tools and Manufacture, Vol. 46, 7-17, 2006. http://www.sciencedirect.com/scidirimg/clear.gifdoi:10.1016/j.ijmachtools.2005.04.013
  • Wu, B. and Shin, Y.C., "A Self-closed Thermal Model for Laser Shock Peening under the Water Confinement Regime Configuration and Comparisons to Experiments", Journal of Applied Physics, Vol. 97, Issue 11, pp. 113517-1-11, 2005.
  • Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining", International Journal of Heat and Mass Transfer, Volume 48, Issue 10, pp. 1999-2012, May 2005.
  • Rebro, P.A., Shin, Y.C. and Incropera, F.P., "Design of Operating Conditions for Crackfree Laser-assisted Machining of Mullite", International Journal of Machine Tools and Manufacture, Vol. 44, pp. 677-694, 2004.
  • Pfefferkorn, F.E., Shin, Y.C., Incropera, F.P. and Tian, Y., "Laser-Assisted Machining of Partially Stabilized Zirconia", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 42-51, Feb. 2004.
  • Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry", Trans. of the ASME, Journal of Heat Transfer, Vol. 125, No.1, pp. 48-56, Feb. 2003.
  • Rebro, P., Shin, Y.C. and Incropera, F.P., "Laser Assisted Machining of Reaction Sintered Mullite Ceramics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 124, pp. 875-885, Nov. 2002.
  • Zhang, C. and Shin, Y.C., "A Novel Laser-assisted Truing and Dressing Technique for Vitrified CBN Wheels", International Journal of Machine Tools and Manufacture, Vol. 42, Issue 7, pp. 825-835, 2002.
  • Rebro, P.A., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., "Comparative Assessment of Laser-assisted Machining for Various Ceramics", Transactions of North American Manufacturing Research Institution, Vol. 30, pp. 153-160, May 2002.
  • Lei, S., Shin, Y.C. and Incropera, F.P., 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics," Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 123, pp. 639-646, November 2001.
  • Leshock, C.E., Kim, J.N., and Shin, Y.C., 2001, "Plasma Enhanced Machining of Inconel 718: Modeling of Workpiece Temperature with Plasma Heating and Experimental Results," International Journal of Machine Tools and Manufacture, 41/6, pp. 877-891, March 2001.
  • Rozzi, J.C., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., 2000, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 122, pp. 666-670.
  • Lei, S., Shin, Y.C. and Incropera, F.P., 2000, "Deformation Mechanisms and Constitutive Modeling for Silicon Nitride Undergoing Laser Assisted Machining," International Journal of Machine Tools and Manufacture, Vol. 40, No. 15, pp. 2213-2233.
  • Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., 2000, "Laser Assisted Machining: Its Potential and Future," Abrasive Magazine, April/May, pp. 16-30 and also published in Machining Technology, featured article, Vol. 11, No. 3, pp. 1-7, Third quarter.
  • Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: II-Assessment of Parametric Effects," International Journal of Heat and Mass Transfer, vol. 43, pp. 1425-1437.
  • Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: I-Comparison of Predictions with Measured Surface Temperature Histories," International Journal of Heat and Mass Transfer, vol. 43, pp. 1409-1424.
  • Lei, S., Shin, Y. C. and Incropera, F. P., 1999, "Material Constitutive Modeling under High Strain Rates and Temperatures through Orthogonal Machining Tests," Trans. of the ASME, Journal of Manufacturing Sciences and Engineering, Vol. 121, pp. 577-585.
  • Lei, S., Shin, Y. C. and Incropera, F. P., 1999, "Thermo-Mechanical Modeling of Orthogonal Machining Process by Finite Element Analysis," International Journal of Machine Tools and Manufacture, Vol. 39, pp. 731-750.
  • Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: I-Comparison of Surface Temperature Measurements with Theoretical Results," Trans. of the ASME, Journal of Heat Transfer, Vol. 120, pp. 899-906.
  • Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: II-Parametric Effects and Assessment of a Simplified Model," Trans. of the ASME, Journal of Heat Transfer, Vol. 120, pp. 907-915.
  • Pfefferkorn, F. E., Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 1997, "Surface Temperature Measurement in Laser-Assisted Machining Processes," Experimental Heat Transfer, Vol. 10, pp. 291-313.
  • Novak, J. W., Shin, Y. C. and Incropera, F. P., 1997, "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718," Trans. of the ASME, Journal of Manufacturing Science & Engineering, Vol. 119, pp. 125-129.

Back to Top

Conference Proceedings

  • Malekipour, E, Valladares, H, Jahan, S., Shin, Y, & El-Mounayri, H. " Predicting Temperature Field in Powder-Bed Fusion (PBF) Additive Manufacturing Process Using Radial Basis Neural Network (RBNN)" Conference Proceedings of the Society for Experimental Mechanics Series, Pages 57-64, 2022. SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2021Virtual, Online, 14 June 2021 through 17 June 2021. https://doi.org/10.1007/978-3-030-86745-4_8
  • Malekipour, E, Valladares, H, Shin, Y, & El-Mounayri, H. "Optimization of Chessboard Scanning Strategy Using Genetic Algorithm in Multi-Laser Additive Manufacturing Process." Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Virtual, Online. November 16-19, 2020. IMECE2020-24581, V02AT02A054; 7 pages. https://doi.org/10.1115/IMECE2020-24581
  • Lei, S., Zhao, X., Yu, X., Hu, A., Vukelic, S., Jun, M.B.G., Joe, H.E., Yao, Y.L., Shin, Y.C, "Ultrafast laser applications in manufacturing processes: A state of the art review", ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019, Volume 2, Erie; United States; 10 June 2019 through 14 June 2019.
  • Moghaddam, N.D., Tao, S., Wu, B., and Shin, Y.C., "Amplification of Plasma at Different Initial Temperatures inside a Microhole by a Short Laser Pulse and the Effect on the Hole Sidewall", Proceedings of the North American Manufacturing Research Institution of SME. Procedia Manufacturing 5. 2016, pp. 724-733, Blacksburg, VA.
  • Dong, X. and  Shin, Y.C., "Multi-Scale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-3956, June 9-13, 2014, Detroit, MI.
  • Zhao, X., Cao, Y.F., Nian, Q., Cheng, G. and Shin, Y.C., "Control of Ablation Depth and Surface Structure in P3 Scribing of Thin-Film Solar Cells by A Picosecond Laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-4042, June 9-13, 2014, Detroit, MI.
  • Bailey, N., Tan, W. and Shin, Y.C., "A parametric study on laser welding of magnesium alloy AZ31 by a fiber laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-4165, June 9-13, 2014, Detroit, MI.
  • Zhao, X. and Shin, Y.C., "Ablation Dynamics of Silicon by Femtosecond Laser and The Role Of Early Plasma", ASME International Conf. on Manuf. Science and Engineering, MSEC2013-1107, June 10-14, 2013, Madison, Wisconsin.
  • Tian, Y., Shin, Y.C. and King, G.B., "Fabrication and Characterization of Photonic Crystals by Two-photon Polymerization Using a Femtosecond Laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2013-1126, June 10-14, 2013, Madison, Wisconsin.
  • Cao, Y., Zhao, X. and Shin, Y.C., "Analysis of Nanosecond Laser Ablation of Aluminum with and without Phase Explosion in Air and Water" Paper (M1103), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Sept. 24-27, 2012, Anaheim, CA.
  • Winiarski, B., Wang, G., Xie, X., Cao, Y., Shin, Y., Liaw, P.K., Withers, P.J. "Mapping residual-stress distributions in a laser-peened Vit-105 bulk-metallic glass using the focused-ion-beam micro-slitting method", Materials Research Society Symposium Proceedings, Volume 1300, 2011, Pages 62-67.
  • Wilson, J.M., Piya, C., Murray, V., Shin, Y.C., Zhao, F., Ramani, K. "Laser-Based Remanufacturing of Engineering Components and Its Environmental Impact Analysis" Paper (1406), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Oct. 23-27, 2011, Orlando, FL.
  • Schoeffel, K. and Shin, Y.C., "Laser Direct Deposition of Nickel-Based Metal Matrix Composite" Paper (1707), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Oct. 23-27, 2011, Orlando, FL.
  • Cao, Y. and Shin, Y.C., "Predictive Self-closed Modeling of Laser Shock Peening and Parametric Study", Proceedings of the 11st International Conference on Shot Peening, September 12-15, 2011, in South Bend, Indiana, USA.
  • Piya, C., Wilson, J.M., Murugappana, S., Shin, Y.C. and Ramani, K. "Virtual Repair: Geometric Reconstruction For Remanufacturing Gas Turbine Blades",  Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Design for Manufacturing and the Life Cycle Conference, IDETC/DFMLC 2011, August 29 - 31, 2011, Washington, DC, USA.
  • Tan, W., Wen, S., Bailey, N.S. and Shin, Y.C., "Numerical Modeling of Transport and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel", ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50219, June 13-17, 2011, Corvallis, Oregon.
  • Shin, Y.C., Cheng, G., Hu, W., Zhang, M.T., Lee, S., "High Precision Scribing of Thin Film Solar Cells by a Picosecond Laser", Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.
  • Shin, Y.C., Hu, W., King, G., "High Aspect Ratio Microhole Drilling Using Ultrashort Lasers", Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.
  • Wen, S. and Shin, Y.C., "Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
  • Hu, W. and Shin, Y.C., "High Precision Scribing of Solar Cell Films by a Picosecond Laser", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
  • Shin, Y.C., "Laser-assisted Machining: Its Benefits and Potential", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
  • Fortunato, A., Zhao, X. and Shin, Y.C., "Fabrication of Waveguides and Microfluidic Channels in Fused Silica by a Femtosecond Laser", Proc. of the 5th International Conference on MicroManufacturing, April 5-8, 2010, Madison, Wisconsin.
  • Shelton, J.A. and Shin, Y.C., "Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration", Proc. of the 5th International Conference on MicroManufacturing, April 5-8, 2010, Madison, Wisconsin.
  • Wen, S. and Shin, Y.C., "Modeling of the Off-axis High Power Diode Laser (HPDL) Cladding Process", ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84049, Oct. 4-7, 2009, W. Lafayette, IN.
  • Dandekar, C. and Shin, Y.C., "Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite", ASME International Conf. on Manuf. Science and Engineering, MSEC2009-840138, Oct. 4-7, 2009, W. Lafayette, IN.
  • Cao, Y. and Shin, Y.C., "Shock Wave Propagation and Spallation Study in Laser Shock Peening", ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84048, Oct. 4-7, 2009, W. Lafayette, IN.
  • Bailey, N.S. and Shin, Y.C., "Optimization of Laser Hardening Processes for Industrial Parts with Complex Geometry Via Predictive Modeling", ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84012, Oct. 4-7, 2009, W. Lafayette, IN.
  • Wu, B.X. and Shin, Y.C., "A Unified Simple Predictive Model for High Fluence Ultra-short Pulsed Laser Ablation of Metal, Semiconductor and Dielectric", ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84317, Oct. 4-7, 2009, W. Lafayette, IN.
  • Shin, Y.C., Hu, W., King, G., "Efficient Machining Of Materials By Picosecond Laser Ablation", Proc. of the NSF Grantees Conference, June 22-24, 2009, Honolulu, Hawaii.
  • Cao, Y., Shin, Y.C. and Wu, B., "A Parametric Study On Overlapping Laser Shock Peening Of 4140 Steel Via Modeling And Experiments", ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72259, Oct. 8-10, 2008, Evanston, IL.
  • Shelton, J.A. and Shin, Y.C., "An Experimental Evaluation Of Laser-Assisted Micromilling Of Two Difficult To Machine Alloys", ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72246, Oct. 8-10, 2008, Evanston, IL.
  • Hu, W., Shin, Y.C. and King, G.B., "Micromachining of Metals, Alloys and Ceramics by Picosecond Laser Ablation", ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72247, Oct. 8-10, 2008, Evanston, IL.
  • Schoeffel, K. and Shin, Y.C., "Laser Cladding of Two Hardfacing Alloys onto Cylindrical Low Alloy Steel Substrates With A High Power Direct Diode Laser". ASME Int. Conf. on Manuf. Science and Engineering, 2007MSEC -31112, Oct. 15-18, 2007, Atlanta, GA.
  • Dandekar, C. and Shin, Y.C. "Multi-Scale Finite Element Modeling of Machining Unidirectional Fiber Reinforced Composites", ASME Int. Conf. on Manuf. Science and Engineering, 2007MSEC -311111, Oct. 15-18, 2007, Atlanta, GA.
  • Wu, B. and Shin, Y.C., "From Incident Laser Pulse to Residual Stress:  A Complete and Self-closed Model for Laser Shock Peening", ASME Int. Conf. on Manuf. Science and Engineering, 2006MSEC -21007, Oct. 8-11, 2006, Ypsilanti, MI.
  • Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride", ASME Int. Conf. on Manuf. Science and Engineering, 2006MSEC -21008, Oct. 8-11, 2006, Ypsilanti, MI.
  • Shin, Y.C. and Tian, Y., "Laser-assisted Dressing of Vitrified CBN Grinding Wheels", Proc. of the International Grinding Conference, April 4-9, 2003, Itasca, Illinois, SME Technical Paper MR03-260.
  • Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry", ASME, IMECE2002-39543, CD Volume  1, Nov. 2002, New Orleans, LA, pp. 1-10.
  • Bowman K.J., F.E. Pfefferkorn, and Y.C. Shin, 2002, "Re-crystallization Textures during Laser-Assisted Machining of Zirconia Ceramics," Materials Science Forum, Vols. 408-412, pp. 1669-1674, Trans Tech Publications, Switzerland.
  • Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., "Laser Assisted Machining: Its Potential and Future", Proceedings of the 3rd International Machining and Grinding Conference, pp. 575-586, Oct. 4-7, 1999, Cincinnati, OH.
  • Lei, S., Shin, Y. C. and Incropera, F. P., 1999, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser-Assisted Machining of Silicon Nitride Ceramics," Proceedings, 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, MED-Vol 10, pp. 781-788. Abstract
  • Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 1999, "Transient, Three-Dimesnional Heat Transfer Model for Partially Stabilized Zirconia Undergoing Laser-Assisted Machining," Proceedings, 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, Tennessee, HTD-Vol. 364-3, pp. 197-209. Abstract
  • Incropera, F.P., Rozzi, J.C., Pfefferkorn, F.E., Lei, S. and Y.C. Shin, 1999, "Laser-Assisted Machining of Difficult-to-Machine Materials," Paper AJTE-6529, Proceedings of the 5th ASME/JSME Thermal Engineering Joint Conference, San Diego, CA, March 15-19.
  • Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 1998, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Proceedings, 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, California, MED-Vol. 8, pp. 229-239.
  • Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 1997, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Ceramic Materials," Proceedings, 1997 ASME International Mechanical Engineering Congress and Exposition, Dallas, Texas, HTD-Vol. 351, pp. 75-85.
  • Shin, Y. C. and Kim, J. N., 1996, "Plasma Enhanced Machining of Inconel 718," Proceedings, 1996 ASME International Mechanical Engineering Congress and Exposition, Atlanta, Georgia, MED-Vol. 4, pp. 243-249.
  • Rozzi, J. C., Krane, M. J. M., Incropera, F. P. and Shin, Y. C., 1995, "Numerical Prediction of Three-Dimensional Unsteady Temperatures in a Rotating Cylindrical Workpiece Subjected to Localized Heating by a Translating Laser Source," Proceedings, 1995 ASME International Mechanical Engineering Congress and Exposition, San Francisco, California, HTD Vol.317-2, pp. 399-411.

 Back to Top

Purdue Seal

MECHANICAL ENGINEERING
PURDUE UNIVERSITY

Last revised on July 11, 2009 by Webmaster

Copyright © 2001 Dr. Y.C. Shin
Any unauthorized use, copying or mirroring strictly prohibited

ed