Journal Publications
1.
Li, D.*, Zhao, F.*, Yang, J., Zhang, J., Wang, J.,
Tian, R., (1995) Optimization of Urban Energy Resource Allocation for Air
Pollution Minimization, Energy of China (in Chinese), 18, 29-32.
2.
Zhao, F.*, Wang, A.*, (1996) Analysis of Gaseous
Pollutant Components in Syngas from Steam Fluidized Bed Coal Gasification,
Municipal Administration & Technology (in Chinese), 12, 19-22.
3.
Zhao, F.*, Li, D.*, (1996), Development of
Comprehensive Model for Pollutant Emission and Desulfurization during Coal
Gasification in a Steam Fluidized Bed Reactor, Journal of Combustion Science
and Technology (in Chinese), 2, 161-169.
4.
Cui, L.*, Shen, Y.*, Li, D., Guo, B. , Zhao, F.,
(1997) Study on Coal Gasification in Steam Fluidized Bed Reactor, Journal of
Fuel Chemistry and Technology (in Chinese), 25, 98-104.
5.
Cui, L.*, Shen, Y.*, Li, D., Zhao, F., (1997)
Experimental Study on Coal Gasification in Steam Fluidized Bed, Engineering
Chemistry & Metallurgy (in Chinese), 18, 97-103.
6.
Guo, B.*, Shen, Y.*, Li, D., Zhao, F., (1997)
Modeling Coal Gasification with a Hybrid Neural Network, Fuel, 76,
1159-1164.
7.
Zhao, F.*, Li, D.*, Cui, L., (1998) On Gaseous
Pollutant Formation and Sulfur Capture in a Steam Fluidized Bed. Part II.
Comprehensive Model on Pollutants Formation and Sulphur Capture, Acta
Scientiae Circumstantiae, 18, 231-236.
8.
Zhao, F.*, Li, D.*, Cui, L., (1998) On Gaseous
Pollutant Emission and Sulfur Capture in a Steam Fluidized Bed. Part I.
Experimental Study on Pollutants Formation and Sulphur Capture, Acta
Scientiae Circumstantiae, 18, 225-230.
9.
Skerlos, S.J.*, Skerlos, L.A., Aguilar, C.A.*, Zhao,
F., (2003) Expeditious Identification and Quantification of Mycobacteria
Species in Metalworking Fluids using Peptide Nucleic Acid Probes”, Journal
of Manufacturing System, 22, 136-147.
10.
Skerlos, S.J.*, Zhao, F.*, (2003) An Optimization
Approach to Implementing Microfiltration for Microbial Control and Recycling in
Metalworking Fluids, Journal of Manufacturing System, 22, 202-210.
11.
Zhao, F.*, Urbance, M.*, Skerlos, S.J., (2004)
Mechanistic Model of Coaxial Microfiltration for Semi-Synthetic Metalworking
Fluid Microemulsions, Journal of Manufacturing Science and Engineering,
126, 435-444.
12.
Zhao, F.*, Landis, H.R., Skerlos, S.J., (2005)
Modeling of Porous Filter Permeability via Image-Based Stochastic Reconstruction
of Spatial Porosity Correlations, Environmental Science and Technology,
39, 239-247.
13.
Zhao, F.*,
Clarens, A.F.*, Skerlos, S.J., Hayes, K., (2006) Structural Aspects of
Surfactant Selection for the Design of Vegetable Oil Semi-Synthetic Metalworking
Fluids, Environmental Science and Technology, 40, 7930-7937.
14.
Zhao, F.*,
Clarens, A.F., Skerlos, S.J., (2007) Optimization of Metalworking Fluid
Microemulsion Surfactant Concentrations for Microfiltration Recycling,
Environmental Science and Technology, 41, 1016 -1023.
15.
Zhao, F.*, Clarens, A.F.*, Hayes, K.F. Skerlos,
S.J., (2007) Evaluating Activation Conditions for Extreme Pressure Additives in
Metalworking Fluids using the Thread Forming Test, Transactions of NAMRI/SME,
35, 351-358.
16.
Skerlos, S.J.*, Clarens, A.F., Hayes, K.F., Zhao,
F., (2008) Current Advances in Sustainable Metalworking Fluids Research (Invited
paper), International Journal of Sustainable Manufacturing, 1, 180-202.
17.
Mu, D.G*, Seager, T., Rao, P.S.C., Zhao,
F*, (2010) Comparative Life Cycle Assessment of Lignocellulosic Ethanol
Production: Bio-chemical vs. Thermo-chemical Conversion, Environmental
Management, 46, 565-578.
18.
Zhao, F.*, Bernstein, W.Z.G, Naik, G.,
Cheng, G., (2010) Environmental Assessment of Laser-Assisted Manufacturing: Case
Studies On Laser Shock Peening and Laser Assisted Turning, Journal of Cleaner
Production, 18, 1311-1319.
19.
Ramani, K.*, Bernstein, W.Z.G*,
Ramanujan, D.*, Zhao, F.*, Sutherland, J., Handwerker, C., Choi, J.K., Kim, H.,
and Thurston, D., (2010) Integrated Sustainable Lifecycle Design: A Review,
ASME Journal of Mechanical Design, 132, 091004. 15 pages.
20.
Devanathan, S., Bernstein, W.Z.G*,
Ramanujan, D.*, Zhao, F.*, Ramani, K.*, (2010) Integration of Sustainability
Into Early Design Through the Function Impact Matrix, ASME Journal of
Mechanical Design, 132, 081004.
8 pages.
21.
Hang, Y.*, Qu, M.*, Zhao, F.*, (2011) Economical and
Environmental Assessment of an Optimized Solar Cooling System for a Medium-sized
Benchmark Office Building in Los Angeles, California, Renewable Energy,
36, 648-658.
22.
Mu, D.G*, Seager, T.*, Rao, S., Park, J.,
Zhao, F., (2011) A Resilience Perspective of Biofuel Production, Integrated
Environmental Assessment and Management, 7, 348–359.
23.
Kou, N.G*, Zhao, F.*, (2011) Effect Of
Multiple Feedstock Strategy on the Economic and Environmental Performance of
Thermochemical Ethanol Production under Extreme Weather Conditions, Biomass
and Bioenergy, 35, 608-616.
24.
Fang, K.*, Uhan, N.*, Zhao, F.*, Sutherland, J.W.,
(2011) A New Approach to Scheduling in Manufacturing for Power Consumption and
Carbon Footprint Reduction, Journal of Manufacturing Systems,
30, 234-240.
25.
Kou, NG*, Zhao, F.*, (2011)
Techno-Economical Analysis of A Thermo-Chemical Biofuel Plant with Feedstock and
Product Flexibility Under External Disturbances, Energy, 36, 6745–6752.
26.
Agusdinata, D.B.*, Zhao, F.*, Ileleji, K.,
Delaurentis, D., (2011) Life Cycle Assessment of Potential Bio-jet Fuel
Production in the United States, Environmental Science and Technology,
45, 9133–9143
27.
Agusdinata, D.B.*, Zhao, F.*, Delaurentis, D.,(2012)
Sustainability of Bio-jet Fuels: A Multi-Actor Life Cycle Assessment Approach,
IEEE Potentials, 31, 27-33.
28.
Hang, Y.*, Qu, M.*, Zhao, F.*, (2012) Economic and
Environmental Life Cycle Analysis of Solar Hot Water Systems in the United
States, Energy and Buildings, 45, 181–188.
29.
Zhao, F.*, Ogaldez, J.G*, Sutherland, J.W.,
(2012) Quantifying the Water Inventory of Machining Processes, CIRP Annals,
61, 67-70.
30.
Bernstein, W.Z.G*, Ramanujan, D.*, Cox,
M.F., Zhao, F., Sutherland, J.W., Ramani, K., (2012) Teaching Design for
Environment through Critique within a Traditional Product Design Course,
International Journal of Engineering Education, 28, 1-12.
31.
Murray, V.R.G*, Zhao, F.*, Sutherland,
J.W., (2012) Life Cycle Analysis of Grinding: A Case Study of Non-Cylindrical
Computer Numerical Control Grinding via Unit-Process Life Cycle Inventory
Approach, Proceedings of the IMechE - Part B: Journal of Engineering
Manufacture, 226, 1604-1611.
32.
Zhao, F.*,
Murray, V.R.G*, Ramani, K., Sutherland, J.W., (2012) Toward the
Development of Process Plans with Reduced Environmental Impacts, Frontier of
Mechanical Engineering, 7, 231-246.
33.
Fang, K.*, Uhan, N.*,
Zhao, F., Sutherland, J.W.,(2013)
Flow Shop Scheduling with Peak Power Consumption Constraints, Annals of
Operations Research, 206, 115-145.
34.
Kou, N.G*, Zhao, F.*, (2013) Operational
Flexibility: A Key Factor in the Development of Biofuel Technologies,
Sustainable Energy Technologies and Assessments, 1, 28-33.
35.
Haapala, K.*, Zhao, F.*, Camelio, J., Sutherland,
J.W., Skerlos, S.J., Dornfeld, D., Jawair, I.S., Clarens, A.F., Rickli, J.,
(2013) A Review of Engineering Research in Sustainable Manufacturing, ASME
Journal of Manufacturing Science and Engineering, 135, 041013.
16 pages.
36.
Ramanujan, D.*, Bernstein, W.Z.G*, Koho,
M., Zhao, F., Ramani, K., (2014) Prioritizing Design for Environment Strategies
Using a Stochastic Analytic Hierarchy Process, Journal of Mechanical Design,
136, 071002.
10 pages.
37.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.,
(2014) Energy-conscious flow shop scheduling under time-of-use electricity
tariffs, CIRP Annals - Manufacturing Technology, 63, 37–40.
38.
Wilson, J.M.*, Piya, C.*, Shin, Y.C., Zhao, F.,
Ramani, K., (2014) Remanufacturing of turbine blades by laser direct deposition
with its energy and environmental impact analysis, Journal of Cleaner
Production, 80, 170-178.
39.
Agusdinata, D.B.*, Lee, S.C., Zhao, F., Thissen, W.,
(2014) Simulation modeling framework for uncovering system behaviors in the
biofuels supply chain network, Simulation: Transactions of the Society for
Modeling and Simulation International, 90, 1103–1116.
40.
Navarro, J.G*, Zhao, F.* (2014).
Life-cycle assessment of the production of rare-earth elements for energy
applications: a review. Frontiers in Energy Research, 2, Article
#45, 17 pages.
41.
Wang, C.*, Mu,
D., Zhao, F.*, & Sutherland, J. W. (2015). A parallel simulated annealing method
for the vehicle routing problem with simultaneous pickup–delivery and time
windows. Computers & Industrial Engineering, 83, 111-122.
42.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.,
(2015). Energy-Efficient Scheduling of Multiple Manufacturing Factories under
Real-Time Electricity Pricing, CIRP Annals - Manufacturing Technology,
64, 41-44.
43.
Sharma, A.*, Zhao, F., Sutherland, J.W., (2015)
Econological Scheduling of a Manufacturing Enterprise Operating Under a
Time-of-Use Electricity Tariff, Journal of Cleaner Production, 108,
256-270.
44.
Xu, D.*, Qu, M.*, Hang, Y., & Zhao, F.* (2015).
Multi-objective optimal design of a solar absorption cooling and heating system
under life-cycle uncertainties. Sustainable Energy Technologies and
Assessments, 11, 92-105.
45.
Bernstein, W. Z.G*, Ramanujan, D.*,
Kulkarni, D. M., Tew, J., Elmqvist, N., Zhao, F., Ramani, K. (2015). Mutually
coordinated visualization of product and supply chain metadata for sustainable
design. Journal of Mechanical Design, 137, 121101. 10 pages.
46.
Mu, D.*, Wang, C., Zhao, F.*, Sutherland, J.W.,
(2016). Solving Vehicle Routing Problem with Simultaneous Pickup and delivery
Using Parallel Simulated Annealing Algorithm, International Journal of
Shipping and Transport Logistics, 8, 81-106.
47.
Fang, K.*, Uhan, N.A.*, Zhao, F., Sutherland, J.W.,
(2016). Scheduling on a single machine under time-of-use electricity tariffs,
Annals of Operations Research, 238, 199–227.
48.
Li, L.*, Yan, J.H.*, Zhao, F.*, (2016). A
Multi-level Optimization Approach for Energy-efficient Flexible Flow Shop
Scheduling, Journal of Cleaner Production, 137, 1543–1552.
49.
Vahidi, E.G*, Jin, E., Das, M., Singh,
M., Zhao, F., (2016). Environmental Life Cycle Analysis of Pipe Materials for
Sewer Systems, Sustainable Cities and Society, 27, 167-174.
50.
Wang, J.K.*, Qiao, F., Zhao, F.*, Sutherland, J.W.,
(2016). Batch scheduling for minimal energy consumption and tardiness under
uncertainties: A heat treatment application, CIRP Annals-Manufacturing
Technology, 65, 17-20.
51.
Wang, J.K.*, Qiao, F., Zhao, F.*, Sutherland, J.W.,
(2016). A Data Driven Model for Energy Consumption in the Sintering Process,
ASME Journal of Manufacturing Science and Engineering, 138, 101001. 12
pages.
52.
Choi, C.H.G*, Cao, J.J.G,
Zhao, F.*, (2016). System Dynamics Modeling of Indium Material Flows under Wide
Deployment of Clean Energy Technologies, Resources, Conservation and
Recycling, 114, 59-71.
53.
Vahidi, E.G*, Navarro, J.G,
Zhao, F.*, (2016). An initial life cycle assessment of rare earth oxides
production from ion-adsorption clays, Resources, Conservation and Recycling,
113, 1-11.
54.
Abotalib, M.G*, Zhao, F.*, Clarens, A.,
(2016). Deployment of GIS-LCA integrated framework for exploring the
opportunities and challenges of enhanced oil recovery using industrial CO2
supply in the United States, ACS Sustainable Chemistry and Engineering,
4, 4743–4751.
55.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.,
(2016). Scheduling of a Single Flow Shop for Minimal Energy Cost Under Real-Time
Electricity Pricing, ASME Journal of Manufacturing Science and Engineering,
139, 014502. 5 pages.
56.
Li, L.*, Huang, H.H.*, Liu, Z.F., Li, X., Triebe,
M.J.G*, Zhao, F.*, (2016). An energy-saving method to solve the
mismatch between installed and demanded power in hydraulic press, Journal of
Cleaner Production, 139, 636-645.
57.
Li, L*, Huang, H.H., Zhao, F.*, Liu, Z.F., (2016). A
coordinate method applied to partitioned energy-saving control for grouped
hydraulic presses, Journal of Manufacturing Systems, 41, 102–110.
58.
Zhang, H.G*, Burr, H., Zhao, F.*, (2017).
A Comparative Life Cycle Assessment (LCA) of Lighting Technologies for
Greenhouse Crop Production, Journal of Cleaner Production, 140, 705-713.
59.
Cao, J.J.G*, Choi, C.H.G,
Zhao, F.*, (2017). Agent-Based Modeling of the Adoption of High-efficiency
Lighting in the Residential Sector, Sustainable Energy Technologies and
Assessments, 19, 70–78.
60.
Steinbuks, J.*, Satija, G.G*, Zhao, F.*,
(2017). Sustainability of Solar Electricity: The Role of Endogenous Resource
Substitution and Cross-Sectoral Responses, Resource and Energy Economics,
49, 218-232.
61.
Cong, L.G*, Zhao, F., Sutherland, J.W.,
(2017). Integration of dismantling operations into a value recovery plan for
circular economy, Journal of Cleaner Production, 149, 378-386
62.
Zhai, Y.X.G*, Biel, K., Zhao, F.*,
Sutherland, J.W., (2017). Dynamic scheduling of a flow shop with on-site wind
generation for energy cost reduction under real time electricity pricing,
CIRP Annals - Manufacturing Technology, 66, 41-44.
63.
Cong, L.G*, Zhao, F., Sutherland, J.W.,
(2017). Value Recovery from End-of-Use Products Facilitated by Automated
Dismantling Planning, Clean Technologies and Environmental Policy, 19,
1867-1882.
64.
Vahidi, E.G*, Zhao, F.*, (2017).
Environmental life cycle assessment on the separation of rare earth oxides
through solvent extraction, Journal of Environmental Management, 203,
255-263.
65.
Ren, Y.P.*, Tian, G.D., Zhao, F., Yu, D.Y., Zhang,
C.Y., (2017). Selective cooperative disassembly planning based on
multi-objective discrete artificial bee colony algorithm, Engineering
Applications of Artificial Intelligence,
64, 415-431.
66.
Zhang, H.G*, Cai, J.*, Fang, K., Zhao,
F.*, Sutherland, J.W., (2017). Operational optimization of a grid-connected
factory with onsite photovoltaic and battery storage systems, Applied Energy,
205, 1538-1547.
67.
Li, L.*, Huang, H.H*, Zhao, F.*, Triebe, M.J.G*,
Liu, Z.F., (2017). Analysis of a novel energy-efficient system with
double-actuator for hydraulic press, MECHATRONICS, 47, 77-87.
68.
Li, L.*, Huang, H.H, Zhao, F.*, Liu, Z.F., (2017).
Operation scheduling of multi-hydraulic press system for energy consumption
reduction, Journal of Cleaner Production, 165, 1407-1419.
69.
Ma, Y.M.*, Qiao, F., Zhao, F.*, Sutherland, J.W.,
(2017). Dynamic Scheduling of a Semiconductor Production Line Based on a
Composite Rule Set, Applied Science, 7, 1052, 10 pages.
doi:10.3390/app7101052
70.
Li, L.*, Huang, H.H*, Zhao, F.*, Triebe, M.J.G*,
Liu, Z.F., (2017). An energy-saving method by balancing the load of operations
for hydraulic press, IEEE/ASME Transactions on Mechatronics, 22,
2673-2683.
71.
Li, Z.G.*, Zhao, F.*, (2017). An Analytical
Hierarchy Process based Study on the Factors Affecting Legislation on Plastic
Bags in the U.S.A., Waste Management & Research, 35, 795-809.
72.
Rejeski, D., Zhao, F.*, Huang, Y.*, (2018). Research
Needs and Recommendations on Environmental Implications of Additive
Manufacturing, Additive Manufacturing, 19, 21-28.
73.
Ren, Y.P.*, Zhang, C.Y., Zhao, F.*, Tian, G.D., Lin,
W.W., Meng, L.L., Li, H. (2018). Disassembly line balancing problem using
interdependent weights-based multi-criteria decision making and 2-Optimal
algorithm, Journal of Cleaner Production, 174, 1475-1486.
74.
Li, L.*, Deng, X., Zhao, F., Sutherland, J.W.,
(2018). Multi-objective optimization of tool path considering efficiency,
energy-saving and carbon-emission for free-form surface milling, Journal of
Cleaner Production, 172, 3311-3322.
75.
Biel, K.*, Zhao, F.*, Sutherland, J.W., Glock, C.,
(2018). Flow shop scheduling with grid-integrated onsite wind power using
stochastic MILP, International Journal of Production Research, 56,
2076-2098.
76.
Choi, C.H.G*, Eun, J.*, Cao, J.J.G,
Lee, S., Zhao, F.*, (2018). Global strategic level supply planning of materials
critical to clean energy technologies–A case study on indium, Energy,
147, 950-964.
77.
Ren, Y.P.*, Zhang, C.Y., Zhao, F.*, Tian, G.D., Lin,
W.W., Meng, L., Li, H., (2018). An asynchronous parallel disassembly planning
based on genetic algorithm, European Journal of Operational Research,
269,647-660.
78.
Arshi, P.S.G*, Vahidi, E.G,
Zhao, F.*, (2018). Behind the scenes of clean energy–the environmental footprint
of rare earth products, ACS Sustainable Chemistry and Engineering, 6,
3311–3320.
79.
Nguyen, R.*, Fishman, T.*, Zhao, F., Imholte, D.D.,
Graedel, T.E., (2018). Analyzing Critical Material Demand: A Revised Approach,
Science of Total Environment, 630, 1143-1148.
80.
Zhang, T.H.*, Zhao, F.*, Ru, Y.H., Sutherland, J.W.,
(2018). Fresh produce retailing: A comparison of replenish-to-order and
replenish-to-stock modes, Journal of Interdisciplinary Mathematics, 21,
771-781.
81.
Vahidi, E.G*, Zhao, F*, (2018). Assessing
the environmental footprint of the production of rare earth metals and alloys
via molten salt electrolysis, Resources, Conservation & Recycling, 139,
178-187.
82.
Zhang, T.*, Zhao, F.*, Zhang,
J., Mendis, G., Ru, Y., & Sutherland, J. W. (2018) An Approximation of the
Customer Waiting Time for Online Restaurants Owning Delivery System. Journal
of Systems Science and Complexity, 32, 907-931.
83.
Zhang, T.*, Zhang, J., Zhao, F.*, Ru, Y., &
Sutherland, J. W. (2018). Allocating resources for a restaurant that serves
regular and group-buying customers. Electronic Commerce Research,
https://doi.org/10.1007/s10660-018-9315-x.
84.
Ren, Y.*, Zhang, C., Zhao, F.*, Triebe, M. J.G,
& Meng, L. (2018). An MCDM-Based Multiobjective General Variable Neighborhood
Search Approach for Disassembly Line Balancing Problem. IEEE Transactions on
Systems, Man, and Cybernetics: Systems, 99, 1-14.
85.
Zhou, L.*, Li, F., Zhao, F., Li, J., & Sutherland,
J. W. (2019). Characterizing the effect of process variables on energy
consumption in end milling. The International Journal of Advanced
Manufacturing Technology, 101, 2837-2848.
86.
Cong, L.G*, Zhao, F., & Sutherland, J. W.
(2019). A design method to improve end-of-use product value recovery for
circular economy. Journal of Mechanical Design, 141, 044502. 10 pages.
87.
Tong, W.*, Mu, D., Zhao, F.*, Mendis, G. P., &
Sutherland, J. W. (2019). The impact of cap-and-trade mechanism and consumers’
environmental preferences on a retailer-led supply Chain. Resources,
Conservation and Recycling, 142, 88-100.
88.
Zhang, H.G*, Zhao, F.* (2019). Reusable
unit process life cycle inventory for manufacturing: gas metal arc welding. Production
Engineering, 13, 89-97.
89.
Tong, W.*, Du, J., Zhao, F.*, Mu, D., & Sutherland,
J. W. (2019). Optimal Joint Production and Emissions Reduction Strategies
Considering Consumers’ Environmental Preferences: A Manufacturer’s Perspective. Sustainability, 11,
474, doi:10.3390/su11020474.
90.
Luo, H.G*, Kou, Z., Zhao, F., & Cai, H.
(2019). Comparative life cycle assessment of station-based and dock-less bike
sharing systems. Resources, Conservation and Recycling, 146, 180-189.
91.
Lu, Q.*, Zhou, G.H.*, Zhao, F.*, Li, L., Ren, Y.P.,
Li, L., Luan, X.N., Sutherland, J.W., (2019). Topology optimization of oilstone
components considering carbon emissions associated with honing processes,
Journal of Cleaner Production, 225, 181-195.
92.
Li, Z.G*, Diaz, L.A., Yang, Z.Y., Jin,
H.Y.*, Lister, T.E., Vahidi, E., Zhao, F., (2019). Comparative Life Cycle
Analysis for Value Recovery of Precious Metals and Rare Earth Elements from
Electronic Waste, Resources, Conservation & Recycling, 149, 20-30.
93.
Wang, H.Y.*, Zhao, F.*, Gao, H.M., Sutherland, J.W.,
A Three-stage Method with Efficient Calculation for Lot Streaming Flow Shop
Scheduling, Frontiers of Information Technology and Electronic Engineering,
in press. doi: 10.1631/FITEE.1700457
94.
Lu, Q.*, Zhou, G.H.*, Zhao, F.*, Li, L., Ren, Y.P.,
Determination of the shape and distribution parameters for abrasive grains to
reduce carbon emissions, ASME Journal of Manufacturing Science and
Engineering, to appear. doi:10.1115/1.4041481
95.
Li, L.*, Huang, H.H., Zhao, F.*, Zou, X., Mendis,
G., Luan, X.N., Liu, Z.F., Sutherland, J.W., Modeling and Analysis of the
Process Energy for Cylindrical Drawing, ASME Journal of Manufacturing Science
and Engineering, to appear. doi:10.1115/1.4041924
96.
Li, Z.G.*, Jia, P.Q., Zhao, F., Kang, Y.K., The
Pollution, Treatment, and Solution of Mercury in Spend Fluorescent Lamps in
Mainland China, MDPI International Journal of Environmental Research and
Public Health, to appear. doi: 10.3390/ijerph15122766
97.
Li, Z.G.*, Jia, P.Q., Zhao, F., Kang, Y.K., The
Development Path of Lighting Industry in mainland China: Execution of Energy
Conservation and Management on Mercury Emission, MDPI International Journal
of Environmental Research and Public Health, to appear. DOI:
10.3390/ijerph15122883
98.
Simon, T.R.G*, Yang, Y.R.*, Lee, W.J.,
Zhao, J., Li, L., Zhao, F., Reusable unit process life cycle inventory for
manufacturing: stereolithography, Production Engineering, DOI:
10.1007/s11740-019-00916-0.
99.
Ren, Y.P.*, Zhao, F.*, Jin, H.Y., Meng, L.L., Zhang,
C.Y., Mendis, G.P., Sutherland, J.W., Rebalancing Bike Sharing Systems for
Minimizing Depot Inventory and Traveling Costs, IEEE Transactions on Intelligent
Transportation Systems, DOI: 10.1109/TITS.2019.2935509.
100. Ren,
Y.P.*, Meng, L.L.*, Zhang, C.Y., Zhao, F., Saif, U., Huang, A.H., Mendis, G.P.,
Sutherland, J.W., An efficient metaheuristics for a sequence-dependent
disassembly planning, Journal of Cleaner Production, DOI:
10.1016/j.jclepro.2019.118644.
Refereed Conference Proceedings
1.
Skerlos, S.J.*, Adriaens, P., Hayes, K., Rihana, A.,
Kurabayashi, K., Takayama, S., Zimmerman, J., Zhao, F., “Challenges to Achieving
Sustainable Aqueous Systems: A Case Study in Metalworking Fluids”, The Second
International Symposium on Inverse Manufacturing, December 13-16, 2001,
Tokyo, Japan.
pp. 566-571
2.
Zhao, F.*, Urbance, M., Skerlos, S.J.*, “Mechanistic
Model of Coaxial Microfiltration for Semi-Synthetic Metalworking Fluid
Microemulsions”, Japan/USA Symposium on Flexible Manufacturing, July
15-18, 2002, Hiroshima, Japan. pp.435-444.
3.
Skerlos, S.J.*, Skerlos, L.A., Aguilar, C.A.*, Zhao,
F., 2003, “Expeditious Identification and Quantification of Mycobacteria
Species in Metalworking Fluids using Peptide Nucleic Acid Probes”,
Thirty-first Annual North American Manufacturing Research Conference, May
20-23, 2003, Hamilton, Ontario, Canada.
pp.136-147.
4.
Skerlos, S.J.*, Morrow, W.R.*, Chan, K-Y., Zhao,F.,
Seliger, G. et al, “Economic and Environmental Characteristics of Global
Cellular Telephone Remanufacturing”, 2003 IEEE International Symposium on
Electronics and the Environment, May 19-22, 2003, Boston, MA.
pp. 99-104
5.
Zhao, F.*,
Landis, H., Skerlos, S.J., “Prediction of Microfiltration Flux Decline due to
Electroviscous Retardation and Adsorption using Pore Scale Stochastic
Reconstruction Model”, 9th World Filtration Congress, April
18-22, 2004, New Orleans, LA. pp. 112-114
6.
Skerlos, S.J.*, Adriaens, P., Hayes, K., Zimmerman,
J., Zhao, F., “Ecological Material and Green Manufacturing: Design and
Technology for Metalworking Fluid Systems” (invited paper), Proceedings of World
Engineering Congress, November 2-6, 2004, Shanghai, China.
7.
Zhao, F.*,
Clarens, A.F.*, Hayes, K.F., Skerlos, S.J., “Evaluating Activation Conditions
for Extreme Pressure Additives in Metalworking Fluids Using the Thread Forming
Test,” Thirty-five Annual North American Manufacturing Research Conference,
May 22-25, 2007, Ann Arbor, Michigan. pp. 351-358
8.
Skerlos, S.J.*, Hayes, K.F., Clarens, F.C., Zhao,
F., “Current Advances in Sustainable Metalworking Fluids Research”, 6th
Global Conference on Sustainable Product Development and Life Cycle Engineering,
Sep. 29-Oct.1, 2008, Busan, Korea.
pp. 180-202
9.
Zhao. F.*,
Mu, D.G*, Rao, P.S., Seager, T., “Technical, Economic, and
Environmental Feasibility of Flexible Feedstock Carbon to Liquid Fuel Process: A
Preliminary Analysis”, 6th Global Conference on Sustainable
Product Development and Life Cycle Engineering, Sep. 29-Oct.1, 2008, Busan,
Korea.
10.
Kou, N.G*, Zhao, F.*, Zhang, L., Aspen
Plus Process Simulation of Flexible Feedstock Thermochemcial Ethanol Production,
2009 International Manufacturing Science and Engineering Conference, Oct
4-7, 2009, West Lafayette.
pp. 17-23
11.
Clarens, A.F.*, Park, Y.E.*, Temme, J., Hayes, K.,
Zhao, F., Skelros, S.J., Evaluation of Cooling Potential And Tool Life In
Turning Using Metalworking Fluids Delivered In Supercritical Carbon Dioxide,
2009 International Manufacturing Science And Engineering Conference, Oct
4-7, 2009, West Lafayette.
pp. 67-75.
12.
Iqbal, L.U.*, Naik, G.*, Pothala, D., Surapaneni,
P.K., Zhao, F., Sullivan, J.P., Environmentally Conscious Wing Design for the
Medium Altitude Long Range UAV, 2009 International Manufacturing Science And
Engineering Conference, Oct 4-7, 2009, West Lafayette. pp. 135-144
13.
Zhao, F.*, Naik, G.*, Zhang, L., Environmental
Sustainability of Laser-Assisted Manufacturing: Case Studies On Laser Shock
Peening and Laser Assisted Turning, International Manufacturing Science And
Engineering Conference, Oct 4-7, 2009, West Lafayette. pp. 97-105
14.
Devanathan, S.*, Zhao, F.*, Ramani, K.*, Integration
Of Sustainability into Early Design Through Working Knowledge Model and Visual
Tools, 2009 International Manufacturing Science And Engineering Conference,
Oct 4-7, 2009, West Lafayette.
pp.
169-177.
15.
Kou, N.G*, Zhao, F.*, Feasibility
Analysis of Flexible Carbon To Ethanol Process Using Aspen Plus Process
Simulation, Proceedings of the 2009 ASME International Mechanical Engineering
Congress & Exposition, Nov 13-19, 2009, Lake Buena Vista, Florida.
16.
Bernstein, W.Z.G*, Ramanujan, D.,
Devanathan, S.*, Zhao, F., Ramani, K., Sutherland, J.W., Development of a
Framework for Sustainable Concept Design, 17th CIRP International Conference
on Life Cycle Engineering, Hefei, China, May 19-21, 2010.
17.
Mu, D.G*, Seager, T., Rao, P.S., Zhao,
F.*, An Examination of Biofuel Production from a Resilience Perspective,
International Design Engineering Technical Conferences & Computers and
Information in Engineering Conference, August 15-18, 2010, Montreal, Canada.
18.
Bernstein, W.Z.G*, Ramanujan, D.,
Devanathan*, Zhao, F., Ramani, K., Sutherland, J.W., Sustainable Conceptual
Design through Function-Impact Matrix: A designer’s Perspective,
International Design Engineering Technical Conferences & Computers and
Information in Engineering Conference, August 15-18, 2010, Montreal, Canada.
19.
Fang, K.*, Uhan, N.*, Zhao, F.*, Sutherland, J.W., A
New Shop Scheduling Approach in Support of Sustainable Manufacturing, 18th
CIRP International Conference on Life Cycle Engineering, May 2-4, 2011,
Braunschweig, Germany.
pp. 305-310
20.
Zhao, F.*, Cooper, K., Handwerker, C., GreenTV: A
project-based learning module on sustainable electronics, Proceedings of the
2011 IEEE International Symposium on Sustainable Systems and Technology,
Chicago, May 16-18, 2011. pp. 1-4.
21.
Fang, K.*, Uhan, N.*, Zhao, F., Sutherland, J.W.,
Flow Shop Scheduling for Sustainable Manufacturing, 10th Workshop on Models
and Algorithms for Planning and Scheduling Problems, June 19 - 24, Nymburk,
Czech Republic.
22.
Fang, K.*, Uhan, N.*, Zhao, F.*, Sutherland, J.W., A
New Approach to Scheduling in Manufacturing for Power Consumption and Carbon
Footprint Reduction, 39th North American Manufacturing Research
Conference, June 13-17, Corvallis, OR. pp.234-240.
23.
Ramanujan, D.*, Bernstein, W.Z.G, Zhao,
F., Ramani, K., Incorporating Information Gap Decision Theory Within the
Function Impact Method, ASME 2011 International Design Engineering Technical
Conferences, August 28-31, 2011, Washington, DC.
24.
Bernstein, W. Z.G*, Ramanujan, D.*, Cox,
M., Zhao, F., Sutherland, J.W., Ramani, K., Implementing Design Critique for
Teaching Sustainable Concept Generation, International Conference on
Engineering Design ICED ’11, 15-18 August 2011, Technical University of
Denmark.
25.
Haapala, K.*, Zhao, F.*, Camelio, J., Skerlos, S.J.,
Sutherland, J.W., Jawair, I.S., Zhang, H.C., Dornfeld, D., Clarens, A.F., A
Review of Engineering Research in Sustainable Manufacturing, Proceedings of
the ASME 2011 International Manufacturing Science and Engineering Conference,
MSEC2011, June 13-17, 2011, Corvallis, Oregon, USA.
p.041013.
26.
Wilson, J.M.*, Piya C.*, Murray, V.G,
Shin, Y., Zhao, F., Ramani, K., Laser-Based Remanufacturing of Engineering
Components and Its Environmental Impact Analysis, The International Congress
on Applications of Lasers & Electro-Optics, October 23 - 27 , 2011, Disney
World Resort, FL.
pp.
577-586.
27.
Murray, V.R.G*, Zhao, F.*, Sutherland,
J.W., Integration of Economic and Environmental Considerations into Process
Selection and Planning, 40th North American Manufacturing Research
Conference, June 4-8, 2012, South Bend, IN.
28.
Bernstein, W.Z.G*, Ramanujan, D.*, Koho,
M., Zhao, F., Ramani, K., Discovering Material Recovery Scenarios for Industrial
Machinery: A Case-Based Approach, Proceedings of the ASME 2012 International
Manufacturing Science and Engineering Conference, June 4-8, 2012, Notre
Dame, IN. pp. 1097-1104
29.
Ogaldez, J.G*, Barker, A., Zhao, F.*,
Sutherland, J.W., Water Footprint Quantification of Machining Processes, 19th
CIRP Conference on Life Cycle Engineering, May 23-25, 2012, Berkeley, CA.
pp.
461-466.
30.
Hang, Y.*, Qu, M.*, Zhao, F.*, Uncertainty Analysis
of a Solar Absorption Cooling and Heating System for a Medium-sized Office
Building in Atlanta, the 6th ASME International Conference on
Energy Sustainability, July 23-26, 2012, San Diego, USA.
31.
Buis, J.UG*, Zhao, F.*, Sutherland, J.W.,
Unit Life Cycle Inventory Models of Hot Forming Processes, ASME 2013
Manufacturing Science and Engineering Conference, June 10-14, Madison, WI.
Paper# MSEC2013-1054.
32.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.,
Manufacturing Scheduling for Reduced Energy Cost in a Smart grid Scenario,
Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP
International Conference on Life Cycle Engineering, April 17-19, 2013,
Singapore. pp 183-189.
33.
Wang, C.*, Zhao, F.*, Mu, D., & Sutherland, J. W..
Simulated annealing for a vehicle routing problem with simultaneous
pickup-delivery and time windows. In IFIP International Conference on
Advances in Production Management Systems. 2013, September. Springer,
Berlin, Heidelberg. pp. 170-177
34.
Bernstein, W.Z.G*, Ramanujan, D.*, Zhao,
F., Ramani, K., Profiling Energy Consumption of Smartphone Users for
Environmentally Efficient Business Decisions, ASME 2013 International Design
Engineering Technical Conferences, August 4-7, 2013, Portland, OR.
pp.
V004T05A042-V004T05A042
35.
Bernstein, W.Z.G*, Ramanujan, D.*,
Elmqvist, N.*, Zhao, F., Ramani, K., ViSER: Visualizing Supply Chains for
Eco-Conscious Redesign, ASME 2014 International Design Engineering Technical
Conferences and Computers and Information in Engineering Conference,
Buffalo, NY, August 16-20, 2014.
Paper No.
DETC2014-34960.
36.
Mazzurco, A.*, Zhu, Q.*, Guo, W.J., Zhao, F., A
Comparative Study of Clay Brick and Fly Ash Brick in USA and China:
Environmental and Sociocultural Perspectives, Proceedings of the
International Symposium on Sustainable Systems and Technologies, Oakland,
CA, May 16-19, 2014.
37.
Zhao, F.*, Lagro, A.UG*, Mendis, G.,
Handwerker, C., Recycling of Liquid Crystal Displays for Maximum Resource
Recovery, Proceedings of the International Symposium on Sustainable Systems
and Technologies, Oakland, CA, May 16-19, 2014.
38.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.,
Manufacturing Scheduling for Energy Cost Reduction in a Smart Grid Scenario,
ASME 2014 International Manufacturing Science and Engineering Conference,
Detroit, MI, June 9-12, 2014.
pp.
V001T05A001-V001T05A001
39.
Navarro, J.G*, Zhao, F.*, Sutherland, J.W., Comparative LCA of NdFeB
and ferrite motors used in the microfabrication industry, The 9th
International Workshop on Microfactories, Honolulu, Hawai, October 5-8,
2014. Pp.223-230.
40.
Cong, L.G*,
Jin, H.Y.*, Fitsos, P., McIntyre, T., Yih, Y.W., Zhao, F., Sutherland, J.W.
(2015), Modeling the value recovery of rare earth permanent magnets at
end-of-life, Procedia CIRP, 29, 680-685.
41.
Zhang, H.G*, Zhao, F.*, Sutherland J.W.
(2015), Manufacturing Scheduling of Collaborative Factories for Energy Cost
Reduction, Procedia Manufacturing, 1, 122-133.
42.
Choi, C.H.G*, Zhao, F.*, System dynamics
modeling of indium material flows for consequential life cycle assessment of
thin-film photovoltaic system, Proceedings of the International Symposium on
Sustainable Systems and Technologies, Dearborn, MI, May 18-20, 2015.
43.
Navarro, J.G*, Zhao, F.*, Life Cycle
Assessment of Rare Earth Oxides Production from Ion-Adsorption Clays,
Proceedings of the International Symposium on Sustainable Systems and
Technologies, Dearborn, MI, May 18-20, 2015.
44.
Cao, J.J.G*, Zhao, F.*, Agent-Based
Modeling of the Adoption of High-efficiency Lighting in the Residential Sector,
Proceedings of the International Symposium on Sustainable Systems and
Technologies, May 16-18, 2016, Phoenix, AZ.
pp.70-78.
45.
Cong, L.G*, Zhao, F., Sutherland J.W., A
Method to Optimize Value Recovery from End-of-Life Products, ASME 2016 11th
International Manufacturing Science and Engineering Conference, Blacksburg,
Virginia, USA, June 27–July 1, 2016.
pp.
V003T08A019-V003T08A019.
46.
Cong, L.G*, Zhao, F., Sutherland J.W.
(2017), Product Redesign for Improved Value Recovery via Disassembly Bottleneck
Identification and Removal, Procedia CIRP, 61, 81-86
47.
Simon, T.G*, Aguilera, G.G*,
Zhao, F.*, Characterization of Particle Emission from Desktop 3D Printers,
ASME 2017 12th International Manufacturing Science and Engineering Conference,
Los Angeles, California, USA, June 4-8, 2017.
48.
Zhai, Y.X.G*, Zhao, F.*, Wang, H.Y.,
Sutherland, J.W., Dynamic Manufacturing Scheduling Under Real-Time Electricity
Pricing Based on MILP and ARIMA, ASME 2017 12th International Manufacturing
Science and Engineering Conference, Los Angeles, California, USA, June 4-8,
2017.
pp.
V004T05A030-V004T05A030
49.
Zhu, Y.X.G*,
Zhao, F.*, A Rapid
Automatic Life Cycle Assessment Tool for Eco-design, ASME 2017 International
Design Engineering Technical Conferences, Cleveland, Ohio, August 6-9, 2017.
pp.
V004T05A036-V004T05A036
50.
Triebe, M.J.G*, Mendis, G.P., Zhao. F.,
Sutherland, J.W. (2018), Understanding Energy Consumption in a Machine Tool
through Energy Mapping, Procedia CIRP, 69, 259-264.
51.
Simon, T.R.G*, Cong, L.G, Zhai,
Y.X.G*, Zhu, Y.X.G,
Zhao, F., (2018) A Semi-automatic System for Efficient Recovery of Rare Earth
permanent Magnets from hard Disk Drives, Procedia CIRP, 69,
916-920.
52.
Luan, X.N.*, Zhang, S., Li, J.F., Mendis, G.,
Zhao, F.,
Sutherland, J.W., Trade-off analysis of tool wear, machining quality and energy
efficiency of alloy cast iron milling process, Procedia Manufacturing,
26, 383-393.
53.
Simon, T.R.*, Lee, W.J.*, Boor, B., Spurgeon, B.,
Zhao, F.* (2018) An Experimental Study on the Energy Consumption and Emission
Profile of Fused Deposition Modeling Process, Procedia Manufacturing, 26,
920-928.
54.
Li, L.*, Huang, H.H., Zhao, F., Gao, M., Liu, Z.F.,
Sutherland, J.W. (2019) Power measurement in energy efficient manufacturing:
Accuracy analysis, Challenges, and Perspectives for improvement, Procedia
CIRP, 80, 138-143.
55.
Triebe, M.J.G*, Zhao, F., Sutherland, J.W.
(2019) Achieving Energy Efficient Machine Tools by Mass Reduction through
Multi-Objective Optimization, Procedia CIRP, 80, 73-78.
Book Chapters
1.
Zhao, F.*, Hayes, K.F., Skerlos, S.J., (2010).
Formulation Design of Metalworking Fluid Microemulsions Using Bio-based
Surfactants, In Douglas G. Hayes, Daniel Solaiman, Richard Ashby, and Dai
Kitamono (Eds.), Bio-Based Surfactants and Detergents, pp. 389-424.
2.
Agusdinata, D.B.*, Zhao, F.*, (2014) Advanced System
Modeling, in Rita Schenck and Philip White (Eds), Environmental Life Cycle
Assessment, American Center for Life Cycle Assessment, pp.83-96.
3.
Zhao, F.*, Sharma, A.*, “Environmentally Friendly
Machining”, in Handbook of Manufacturing Engineering and Technology, Edited by
Andrew Y.C. Nee, Springer, 2015,
pp. 1127-1154.
4.
Uhan, N.A.*, Liu, A., Zhao, F., (2018). Scheduling
for Energy Efficient Manufacturing, in Dornfeld, D.A., Sutherland, J.W., and
Linke, B. (Eds.), Energy Efficient Manufacturing: Theory and Applications,
John Wiley & Sons, Inc.
pp.359-380.
5.
Yin, R.X.*, Zhao, F.*, Sutherland, J.W., (2018).
Energy Efficient Manufacturing Process Planning, in Dornfeld, D.A., Sutherland,
J.W., and Linke, B. (Eds.), Energy Efficient Manufacturing: Theory and
Applications, John Wiley & Sons, Inc. pp.339-358.
