Yung Shin

PUBLICATIONS (since 1990)

HOME

CONTACT

NEWS

RESEARCH

EDUCATION

LABORATORIES

PERSONNEL

PARTNERS

PUBLICATIONS

NEWS MEDIA COVERAGE

Archival Journal Publications (Google Scholar Citations)

 

1.         Lee, J.W. and Shin, Y.C., "Characteristics of tungsten coating on ODS plate (PM2000) via a modified laser-based additive technique: offset laser cladding", Surface and Coatings Technology, Volume 476, 30 January 2024, 130285. https://doi.org/10.1016/j.surfcoat.2023.130285 

2.         Aggarwal, A., Shin, Y.C., Kumar, A. "Unravelling Keyhole Instabilities and Laser Absorption Dynamics during Laser Irradiation of Ti6Al4V: A High-Fidelity Thermo-Fluidic Study", International Journal of Heat and Mass Transfer, Volume 219, February 2024, 124841. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124841

3.         Lee, J., Akin, S., Walsh, J.R., Jun, M.B.G., Lee, H., Shin, Y.C., "A novel Nitinol structure with functionally gradient pure titanium layers and biomaterial coatings for orthopedic implant applications", Progress in Additive Manufacturing, 2013. https://doi.org/10.1007/s40964-023-00500-0

4.         Hong, K.M. and Shin, Y.C., "A Novel Approach to the Deposition of Co-Mo-Cr-Si Coating on Haynes 282 by Selective Laser Melting", Surface Coatings Technology, Volume 475, 25 December 2023, 130136. https://doi.org/10.1016/j.surfcoat.2023.130136

5.         Zhang, S.J. and Shin, Y.C., "Analysis of the heat-affected zone and ablation efficiency in terms of burst mode parameters during high power picosecond laser micromachining of metals", MSEC, Trans. ASME, Journal of Manufacturing Science and Engineering. 2023. https://doi.org/10.1115/1.4056403

6.         Aggarwal, A., Shin, Y.C., Kumar, A. "Investigation of the Transient Coupling between the Dynamic Laser Beam Absorptance and the Melt Pool - Vapor Depression Morphology in Laser Powder Bed Fusion Processes", International Journal of Heat and Mass Transfer, Volume 201, Part 2, February 2023, 123663. https://doi.org/10.1016/j.ijheatmasstransfer.2022.123663

7.         Zhang, B. and Shin, Y.C., "An Adaptive Gaussian Mixture Filter for Nonlinear State Estimation", Signal Processing, Volume 201, December 2022, 108677. https://doi.org/10.1016/j.sigpro.2022.108677

8.         Harinarayana, V. and Shin, Y.C., "Design and Evaluation of Three-Dimensional Axisymmetric Mechanical Metamaterial Exhibiting Negative Poisson Ratio", Journal of Materials Research and Technology, Volume 19, July-August 2022, Pages 1390-1406. https://doi.org/10.1016/j.jmrt.2022.05.131

9.         Liu, S., Grohol, C. and Shin, Y.C., "High Throughput Synthesis of CoCrFeNiTi High Entropy Alloys via Laser Additive Manufacturing", Journal of Alloys and Compounds, Volume 916, 25 September 2022, 165469. https://doi.org/10.1016/j.jallcom.2022.165469

10.      Grohol, C. and Shin, Y.C., Frank, A., "Laser Cladding of Aluminum Alloy 6061 with Cryogenic Quenching for Improved Microstructure and Hardness", Surface and Coatings Technology, Volume 439, 15 June 2022, 128460. https://doi.org/10.1016/j.surfcoat.2022.128460

11.      Zhang, B. and Shin, Y.C., "A Probabilistic Neural Network for Uncertainty Prediction with Applications to Manufacturing Process Monitoring", Applied Soft Computing, Volume 124, July 2022, 108995. https://doi.org/10.1016/j.asoc.2022.108995

12.      Porro, M., Zhang, B., Parmar, A. and Shin, Y.C., "Data-driven Modeling of Mechanical Properties for 17-4 PH Stainless Steel Built by Additive Manufacturing", Integrating Materials and Manufacturing Innovation, 2022. https://doi.org/10.1007/s40192-022-00261-8

13.      Elkhateeb, M. and Shin, Y.C., "A Microstructure-Based Extended Mechanics of Structure Genome for the Prediction of the Mechanical Behavior of Additively Manufactured Ti6Al4V Considering Porosity and Microstructure", Mechanics of Materials, Volume 169, June 2022, 104300. https://doi.org/10.1016/j.mechmat.2022.104300

14.      Bailey, N. and Shin, Y.C., "Multi-track, Multi-layer Dendrite Growth and Solid Phase Transformation Analysis during Additive Manufacturing of H13 Using a Hybrid Cellular Automata/Phase Field model", International Journal of Advanced Manufacturing Technology, 120, pages 2089-2108 (2022). https://doi.org/10.1007/s00170-022-08901-1

15.      Zhang, B. and Shin, Y.C., "Data-Driven Phase Recognition of Steels for Use in Mechanical Property Prediction", Manufacturing Letters, Volume 30, October 2021, Pages 27-31. https://doi.org/10.1016/j.mfglet.2021.10.005.

16.      Lee, J.W. and Shin, Y.C., "Molecular Dynamics Study of Bulk Properties of Polycrystalline NiTi", Metals 2021, 11, 1237. https://doi.org/10.3390/met11081237

17.      Harinarayana, V. and Shin, Y.C., "Two-photon lithography for Three-Dimensional Fabrication in Micro/Nanoscale Regime: A Comprehensive Review", Optics and Laser Technology, Volume 142, October 2021, 107180. https://doi.org/10.1016/j.optlastec.2021.107180

18.      Zhang, B. and Shin, Y.C., "An Adaptive Gaussian Mixture Method for Nonlinear Uncertainty Propagation in Neural Networks", Neurocomputing, Volume 458, 7 October 2021, Pages 170-183. https://doi.org/10.1016/j.neucom.2021.06.007

19.      Liu, H. and Shin, Y.C., "A Crystal Plasticity-Finite Element Based Approach to Model the Constitutive Behavior of Multi-Phase Steels", Archives of Civil and Mechanical Engineering, 21, Article number: 83 (2021). https://doi.org/10.1007/s43452-021-00226-2.

20.      Grohol, C., Shin, Y.C., Frank, A., "Laser Cladding of Aluminum Alloy 6061 via Off-Axis Powder Injection", Surface Coatings Technology, Volume 415, 15 June 2021, 127099. https://doi.org/10.1016/j.surfcoat.2021.127099

21.      Hong, K.M., Grohol, C., Shin, Y.C., "Comparative Assessment of Physics-based Computational Models on the NIST Benchmark Study of Molten Pool Dimensions and Microstructure for Selective Laser Melting of Inconel 625", Integrating Materials and Manufacturing Innovation, 10, pages 58-71(2021). https://doi.org/10.1007/s40192-021-00201-y

22.      Liu, S. and Shin, Y.C., "Thermodynamically Consistent Phase-Field Modeling of Competitive Polycrystalline Growth of Beta Grains during Additive Manufacturing of Ti6Al4V", J. of Crystal Growth, Volume 564, 15 June 2021, 126112. https://doi.org/10.1016/j.jcrysgro.2021.126112

23.      Elkhateeb, M., Liu, S. and Shin, Y.C., "Analysis of the Effects of Microstructure Heterogeneity on the Mechanical Behavior of Additively Manufactured Ti6Al4V Using Mechanics of Structure Genome", Materials and Design, 2021, Volume 204, June 2021, 109643. https://doi.org/10.1016/j.matdes.2021.109643

24.      Liu, S. and Shin, Y.C., "A Novel 3D Cellular Automata-Phase Field Model for Computationally Efficient Prediction of Dendrite Formation during Solidification in a Large Domain", Computational Material Science, Volume 192, May 2021, 110405. https://doi.org/10.1016/j.commatsci.2021.110405

25.      Katinas, C., Throop, T., Shin, Y.C., Frank, A. "Laser Cladding of Stellite-6 with a Coaxial Nozzle via Modeling and Systematic Experimental Investigations", International Journal of Advanced Manufacturing Technology, 113, pages 837-853(2021). https://doi.org/10.1007/s00170-021-06624-3

26.      Zhang, B. and Shin, Y.C., "A Data-driven Approach of Takagi-Sugeno Fuzzy Control of Unknown Nonlinear Systems", Applied Sciences, 2021, 11(1), 62. https://doi.org/10.3390/app11010062

27.      Shin, Y.C., Wu, B., Lei, S., Cheng, G., Yao, Y., "Overview of Laser Applications in Manufacturing and Materials Processing in Recent Years", Trans. of ASME, Journal of Manufacturing Science and Engineering Nov 2020, 142(11): 110818. https://doi.org/10.1115/1.4048397

28.      Zhang, B., Katinas, C., and Shin, Y.C., "Robust Wheel Wear Monitoring System for Cylindrical Traverse Grinding", IEEE/ASME Transactions on Mechatronics, Vol. 25, No. 5, October 2, 2020, pp. 2220-2229.. https://doi.org/10.1109/TMECH.2020.3007047

29.      Liu, S. and Shin, Y.C., "An Integrated Multi-Scale Simulation Framework for Solidification and Microstructure Evolution during Additive Manufacturing of Ti6Al4V", J. of Computational Material Science, Volume 183, October 2020, 109889. https://doi.org/10.1016/j.commatsci.2020.109889

30.      Liu, S. and Shin, Y.C., "Prediction of 3D Microstructure and Phase Distributions of Ti6Al4V Built by the Directed Energy Deposition Process via Combined Multi-Physics Models", Additive Manufacturing, 2020. https://doi.org/10.1016/j.addma.2020.101234

31.      Ajri, A., Rohatgi, N. and Shin, Y.C., "Analysis of Defect Formation Mechanisms and their Effects on Weld Strength during Friction Stir Welding of Al 6061-T6", International Journal of Advanced Manufacturing Technology, (2020). https://doi.org/10.1007/s00170-020-05353-3.

32.      Katinas, C. and Shin, Y.C., "Prediction of Initial Transient Behavior with stationary heating during Laser Powder Bed Fusion Processes", International Journal of Heat and Mass Transfer, Volume 153, June 2020, 119663. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119663

33.      Zhang, B., Hong, K.M., and Shin, Y.C., "Deep-Learning-Based Porosity Monitoring of Laser Welding Process", Manufacturing Letters, Volume 23, January 2020, Pages 62-66. https://doi.org/10.1016/j.mfglet.2020.01.001

34.      Lei, S., Zhao, X., Yu, X., Hu, A., Vukelic, S., Jun, M.B.G., Joe, H.E., Yao, Y.L. and Shin, Y.C., "Ultrafast Laser Applications in Manufacturing Processes: A State of the Art Review" Trans. of the ASME, Journal of Manufacturing Science and Engineering, Mar 2020, 142(3): 031005. https://doi.org/10.1115/1.4045969

35.      Wang, X., Chen, K., de Vasconcelos, L.S., He, J., Shin, Y.C., Mei, J., Zhao, K. "Mechanical Breathing in Organic Electrochromics" Nature Communications, 11, 211 (2020). https://doi.org/10.1038/s41467-019-14047-8

36.      Bailey, N., Hong, K.M. and Shin, Y.C., "Comparative Assessment of Dendrite Growth and Microstructure Predictions during Laser Welding of Al 6061 via 2D and 3D Phase Field Models", Computational Material Science. Vol. 172, 109291, 2020. https://doi.org/10.1016/j.commatsci.2019.109291

37.      Liu, S., Hong, K.M., Katinas, C. and Shin, Y.C., "Multiphysics Modeling of Phase Transformation in Laser Direct Deposited Ti6Al4V", Journal of Manufacturing Processes, Volume 45, September 2019, Pages 579-587. https://doi.org/10.1016/j.jmapro.2019.07.027

38.      Liu, S., Dhiman, A., Shin, Y.C., Tomar, V., Zhang, S.T. "In-situ synthesis of Zr-Based Bulk Metallic Glass Composites with Periodic Amorphous-Crystalline Microstructure for Improved Ductility via Laser Direct Deposition", Intermetallics, Volume 111, August 2019, 106503. https://doi.org/10.1016/j.intermet.2019.106503

39.      Zhang, B., Liu, S., and Shin, Y.C., "In-Process Monitoring of Porosity During Laser Additive Manufacturing Process", Additive Manufacturing, Vol. 28, August 2019, pp. 497-505. https://doi.org/10.1016/j.addma.2019.05.030

40.      Inamke, G., Pellone, L., Ning, J. and Shin, Y.C., "Enhancement of Weld Strength of Laser Welded Joints of AA6061-T6 and TZM Alloys via Novel Dual-Laser Warm Laser Shock Peening", International Journal of Advanced Manufacturing Technology, September 2019, Volume 104, Issue 1-4, pp 907-919. http://dx.doi.org/10.1007/s00170-019-03868-y

41.      Xu, H., Guo, X., Lei, Y., Fu, H., Xiao, R., Huang, T. and Shin, Y.C., "Welding Deformation of Ultra-Thin 316 Stainless Steel Plate Using Pulsed Laser Welding Process", Optics and Laser Technology, Volume 119, November 2019, 105583. https://doi.org/10.1016/j.optlastec.2019.105583

42.      Pellone, L., Inamke, G., Hong, K.M. and Shin, Y.C., "The Effects of Interface Gap and Shielding Gas on the Welding Quality During Fiber Laser Lap Welding of AA6061-T6", Journal of Materials Processing Technology. Volume 268, June 2019, Pages 201-212 https://doi.org/10.1016/j.jmatprotec.2019.01.025

43.      Ning, J., Hong, K.M., Inamke, G., Shin, Y.C., Zhang, L. "Analysis of Microstructure and Mechanical Strength of Lap Joints of TZM Alloy Welded by a Fiber Laser", Journal of Manufacturing Processes. Volume 39, March 2019, Pages 146-159. https://doi.org/10.1016/j.jmapro.2019.02.015.

44.       Lee, J.W. and Shin, Y.C., "Effects of Composition and Post Heat Treatment on Shape Memory Characteristics and Mechanical Properties for Laser Direct Deposited Nitinol", Lasers in Manufacturing and Materials Processing, March 2019, Volume 6, Issue 1, pp 41-58. HTTPS://DOI.ORG/ 10.1007/s40516-019-0079-5

45.       Elkhateeb, M. and Shin, Y.C., "Investigation of Machining Behavior Ti6Al4V/TiC Composites during Conventional and Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2019, 141(5), 051001 (Mar 04, 2019). https://doi.org/10.1115/1.4042608

46.      Liu, S. and Shin, Y.C., "Additive Manufacturing of Ti6Al4V Alloy: A Review", Materials and Design, Volume 164, 15 February 2019, 107552. https://doi.org/10.1016/j.matdes.2018.107552

47.      Pachaury, Y. and Shin, Y.C., "Assessment of Sub-Surface Damage During Machining of Additively Manufactured Fe-TiC Metal Matrix Composites", Journal of Materials Processing Technology, Volume 266, April 2019, Pages 173-183. https://doi.org/10.1016/j.jmatprotec.2018.11.001

48.      Dong, X. and Shin, Y.C., "Microstructure Evolution Analysis within Multi-Phase Steels during Rolling Processes via Predictive Modeling", International Journal of Mechanical Sciences, Volume 150, January 2019, Pages 576-583. 10.1016/j.ijmecsci.2018.10.061

49.      Katinas, C., Liu, S., Shin, Y.C., "Self-Sufficient Modeling of Single Track Deposition of Ti-6Al-4V with the Prediction of Capture Efficiency", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Jan. 2019, Vol. 141, 011001. https://doi.org/10.1115/1.4041423

50.      Dong, X. and Shin, Y.C., "Crack Formation within Ceramics via Coupled Multiscale Genome and XFEM Predictions under Various Loading Conditions", Engineering Fracture Mechanics, Vol. 204, 2018, Pages 517-530. https://doi.org/10.1016/j.engfracmech.2018.10.036

51.      Dong, X. and Shin, Y.C., "Predictions of Thermal Conductivity and Degradation of Irradiate SiC/SiC Composites by Materials-Genome-Based Multiscale Modeling", Journal of Nuclear Materials, Vol. 512, 15 December 2018, Pages 268-275. https://doi.org/10.1016/j.jnucmat.2018.10.021

52.      Zhang, B. and Shin, Y.C., "A Multimodal Intelligent Monitoring System for Turning Processes", Journal of Manufacturing Processes, Volume 35, October 2018, Pages 547-558. https://doi.org/10.1016/j.jmapro.2018.08.021

53.      Liu, S. and Shin, Y.C., "Simulation and Experimental Studies on Microstructure Evolution of Resolidified Dendritic TiCx in Laser Direct Deposited Ti-TiC Composite", Materials and Design, Volume 159, 5 December 2018, Pages 212-223. https://doi.org/10.1016/j.matdes.2018.08.053

54.      Parmar, V. and Shin, Y.C., "Wideband Anti-Reflective Silicon Surface Structures Fabricated by Femtosecond Laser Texturing", Applied Surface Science, Volume 459, 30 November 2018, Pages 86-91. https://doi.org/10.1016/j.apsusc.2018.07.189

55.      Elkhateeb, M. and Shin, Y.C., "Molecular Dynamics-based Cohesive Zone Representation of Ti6Al4V/TiC Composite Interface", Materials and Design, Volume 155, 5 October 2018, Pages 161-169. https://doi.org/10.1016/j.matdes.2018.05.054

56.      Liu, Z., Wu, B., Xu, R., Zhao, K., Shin, Y.C., "Microhole Drilling by Double Laser Pulses with Different Pulse Energies", Trans. of the ASME, Journal of Manufacturing Science and Engineering, September 2018, Vol. 140 / 091015. https://doi.org/10.1115/1.4040483

57.      Zhang, B., Katinas, C. and Shin, Y.C., "Robust Tool Wear Monitoring Using Systematic Feature Selection in Turning Processes with Consideration of Measurement Uncertainties", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 140(8), 081010 (Jun 04, 2018). HTTPS://DOI.ORG/ 10.1115/1.4040267

58.      Wei, S., Wang, G., Shin, Y.C., and Rong, Y., "Comprehensive Modeling of Transport Phenomena in Laser Hot-wire Deposition Process", International Journal of Heat and Mass Transfer. Volume 125, October 2018, Pages 1356-1368. https://doi.org/10.1016/j.ijheatmasstransfer.2018.04.164

59.      Shin, Y.C., Bailey, N., Katinas, C., Tan, W., "Predictive Modeling Capabilities from Incident Powder and Laser to Mechanical Properties for Laser Directed Energy Deposition", Computational Mechanics, May 2018, Volume 61, Issue 5, pp 617-636. https://doi.org/10.1007/s00466-018-1545-1

60.      Ai, Y., Zheng, K., Shin, Y.C., Wu, B. "Analysis of Weld Geometry and Liquid Flow in Laser Transmission Welding Between PET and Ti6Al4V Based on Numerical Simulation", Laser and Optics Technology, Volume 103, July 2018, Pages 99-108. 10.1016/j.optlastec.2018.01.022

61.      Liu, Z., Wu, B., Samata, A., Shen, N., Ding, H. and Shin, Y.C., "Manufacturing of Hourglass-Shaped Through Holes with Varying Diameters at Different Depths by Dual-Pulse Laser Drilling and Laser-Induced Plasma-Hole Interaction", Manufacturing Letters, Volume 16, April 2018, Pages 18-22. https://doi.org/10.1016/j.mfglet.2018.02.007

62.      Katinas, C., Shang, W., Shin, Y.C., Chen, J. "Modeling Particle Spray for Direct Laser Deposition Using a Four Nozzle Powder Injection System", Trans. of the ASME, Journal of Manufacturing Science and Engineering. 140(4), 2018, 041014. https://doi.org/ 10.1115/1.4038997

63.      Shah, P.N., Shin, Y.C. and Tao, S., "Temporal Evolution of Grain Refinement in Copper Under High Strain Rate Loading via In-situ Synchrotron Measurement and Predictive Modeling", Acta Materialia, Volume 143, 15 January 2018, Pages 43-54. https://doi.org/10.1016/j.actamat.2017.10.005

64.      Dong, X. and Shin, Y.C., "Multiscale Genome Modeling for Predicting Fracture Strength of Silicon Carbide Ceramics", Computational Materials Science, Volume 141, January 2018, Pages 10-18. https://doi.org/10.1016/j.commatsci.2017.09.012

65.      Davis, T., Yao, B. and Shin, Y.C., "Adaptive Robust Control of Combined Machining Force and Contour Error using Global Task Coordinate Frame", Journal of Engineering Manufacture, 2018, Vol. 232(1) 40-50. http://journals.sagepub.com/doi/full/10.1177/0954405416654100

66.      Liu, S. and Shin, Y.C., "The Influences of Melting Degree of TiC Reinforcements on Microstructure and Mechanical Properties of Laser Direct Deposited Ti6Al4V-TiC Composites", Materials and Design, Volume 136, 15 December 2017, Pages 185-195. https://doi.org/10.1016/j.matdes.2017.09.063

67.      Ajri, A. and Shin, Y.C., "Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples via Predictive Numerical Modeling and Experiments", Trans. of the ASME, Journal of Manufacturing Science and Engineering. 139(11), 111009, 2017. https://doi.org/10.1115/1.4037240

68.      Zhang, S.J. and Shin, Y.C., "Effective Methods for Fabricating Trapezoidal Shape Microchannel of Arbitrary Dimensions on Polymethyl Methacrylate (PMMA) Substrate by A CO2 Laser", International Journal of Advanced Manufacturing Technology. October 2017, Volume 93, Issue 1-4, pp 1079-1094. 10.1007/s00170-017-0445-4.

69.      Hong, K.M. and Shin, Y.C., "Investigation on Weld Pool Dynamics in Laser Welding of AISI 304 Stainless Steel with An Interface Gap via A Three-Dimensional Dynamic Model And Experiments", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2017;139(8):081008-081008-10. https://doi.org/10.1115/1.4036521.

70.      Bailey, N.S., Katinas, C. and Shin, Y.C., "Laser Direct Deposition of AISI H13 Tool Steel Powder with Numerical Modeling of Solid Phase Transformation, Hardness, and Residual Stresses", Journal of Materials Processing Technology. Volume 247, September 2017, Pages 223-233. http://doi.org/10.1016/j.jmatprotec.2017.04.020

71.      Sarbada, S. and Shin, Y.C., "Superhydrophobic Metal and Polymer Surfaces Created using a Femtosecond Laser", Applied Surface Science, 405 (2017) 465-475. http://dx.doi.org/10.1016/j.apsusc.2017.02.019

72.      Hong, K.M. and Shin, Y.C., "Prospects of Laser Welding Technology in the Automotive Industry: A Review", Journal of Materials Processing Technology, Volume 245, July 2017, Pages 46-69. HTTPS://DOI.ORG/ http://dx.doi.org/10.1016/j.jmatprotec.2017.02.008

73.      Dong, X. and Shin, Y.C., "Multi-scale Modeling of Thermal Conductivity of SiC-reinforced Aluminum Metal Matrix Composite", Journal of Composite Materials, Volume: 51, Issue: 28, 2017, Pages: 3941-3953. https://doi.org/10.1177/0021998317695873

74.      Hong, K.M. and Shin, Y.C., "The Effects of Interface Gap on Weld Strength During Overlapping Fiber Laser Welding of AISI 304 Stainless Steel and AZ31 Magnesium Alloys", International Journal of Advanced Manufacturing Technology, June 2017, Volume 90, Issue 9, pp 3685-3696. http://link.springer.com/article/10.1007/s00170-016-9681-2

75.      Dong, X. and Shin, Y.C., "Improved Machinability of SiC/SiC Ceramic Matrix Composite via Laser-assisted Micromachining", International Journal of Advanced Manufacturing Technology, April 2017, Volume 90, Issue 1, pp 731-739. HTTPS://DOI.ORG/ 10.1007/s00170-016-9415-5

76.      Ngo, P.D. and Shin, Y.C., "Modeling and Robust Controlling of Laser Welding Process on High Strength Titanium Alloy Using Fuzzy Basis Function Networks and Robust Takagi Sugeno Fuzzy Controller", International Journal of Advanced Manufacturing Technology, 89(1), 1089-1102, 2017. http://link.springer.com/article/10.1007/s00170-016-9104-4

77.      Dong, X. and Shin, Y.C., "Multi-scale Genome Modeling for Predicting the Thermal Conductivity of Silicon Carbide Ceramics", Journal of American Ceramic Society, 99 (12), 4073-4082, 2016. http://onlinelibrary.wiley.com/doi/10.1111/jace.14458/full

78.      Hong, K.M. and Shin, Y.C., "Analysis of Microstructure and Mechanical Properties Change in Laser Welding of Ti6Al4V with A Multiphysics Prediction Model", Journal of Materials Processing and Technology, Volume 237, November 2016, Pages 420-429. https://doi.org/10.1016/j.jmatprotec.2016.06.034

79.      Ngo, P.D. and Shin, Y.C., "Modelling of Unstructured Uncertainties and Robust Controlling of Nonlinear Dynamic Systems Based on Type-2 Fuzzy Basis Function Networks", Engineering Applications of Artificial Intelligence, Volume 53, August 2016, Pages 74-85 (2016). https://doi.org/10.1016/j.engappai.2016.03.010

80.      Sarbada, S., Huang, Z., Shin, Y.C. and, Ruan, X., "Low Reflectance Laser Induced Periodic Surface Structures Created by a Picosecond Laser", Applied Physics A, (2016), 122:453. DOI :10.1007/s00339-016-0004-0

81.      Dong, X. Liao, C., Shin, Y.C. and Zhang, H.H., "Machinability Improvement of Gear Hobbing via Predictive Modeling with Experimental Validation", International Journal of Advanced Manufacturing Technology, October 2016, Volume 86, Issue 9, pp 2771-2779.  HTTPS://DOI.ORG/ 10.1007/s00170-016-8400-3

82.      Dabir Moghaddam, N., Tao, S., Wu, B., and Shin, Y.C., "Modeling of Picosecond Laser-induced Plasma Amplification inside a Microhole and an Implied Novel Technology to Drill Microholes with Varying Diameters with Depth", Manufacturing Letter, Volume 7, Pages 1-5, January 2016.  https://doi.org/10.1016/j.mfglet.2015.11.004

83.      Dong, X. and Shin, Y.C., "Multi-scale Modeling for Predicting the Mechanical Properties of Silicon Carbide Ceramics", Journal of the American Ceramic Society, 99 [3] 1006-1014 (2016). HTTPS://DOI.ORG/ 10.1111/jace.14047

84.      Dong, X. and Shin, Y.C., "Multi-scale Modeling of Alumina Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 138(1), 011004, 2016. https://doi.org/10.1115/1.4029858

85.      Cao, Y. and Shin, Y.C., "Multi-scale Modeling of Phase Explosion in High Fluence Nanosecond Laser Ablation and Clarification of Ablation Depth Prediction Criterion", Applied Surface Science, 357 (2015), pp. 74-85. https://doi.org/10.1016/j.apsusc.2015.08.251

86.      Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C.B., Wang, C.L., Shin, Y.C., Zhang, S., Zavattieri, P.D., "The Status, Challenges, and Future of Additive Manufacturing in Engineering", Computer-Aided Design, 2015, Volume 69, December 2015, Pages 65-89. 10.1016/j.cad.2015.04.001

87.      Jin, X. and Shin, Y.C., "Nonlinear Discrete Time Optimal Control Based on Fuzzy Models", Journal of Intelligent and Fuzzy Systems, Vol. 29, No. 2 (2015) 647-658. HTTPS://DOI.ORG/ 10.3233/IFS-141376

88.      Luo, M. and Shin, Y.C., "Estimation of Keyhole Geometry and Prediction of Welding Defects Based on a Visual System and a Radial Basis Function Neural Network", International Journal of Advanced Manufacturing Technology, Volume 81, Issue 1 (2015), Page 263-276. HTTPS://DOI.ORG/ 10.1007/s00170-015-7079-1

89.      Nian, Q., Zhang, M.Y., Lin, D., Das, S., Shin, Y.C. and Cheng, G.J. "Crystalline Photoactive Copper Indium Diselenide Thin Films by Pulsed Laser Crystallization of Nanoparticle-Inks at Ambient Conditions", RSC Advances, 2015, 5, 57550-57558. HTTPS://DOI.ORG/ 10.1039/C5RA09718E

90.      Hedberg, G. and Shin, Y.C., "Laser Assisted Milling of Ti-6Al-4V ELI with the Analysis of Surface Integrity and Its Economics", Lasers in Manufacturing and Materials Processing, Vol.2, Issue 3, pp. 164-185, 2015. HTTPS://DOI.ORG/ 10.1007/s40516-015-0013-4

91.      Ye, X., Bae, H., Shin, Y.C. and Stanciu, L., "In Situ Synthesis and Characterization of Zr-Based Amorphous Composite by Laser Direct Deposition", Metallurgical and Materials Transaction, A, September 2015, Volume 46, Issue 9, pp 4316-4325. DOI :10.1007/s11661-015-3047-5

92.      Cao, Y., Xie, X., Antonaglia, J., Winiarski, B., Wang, G., Shin, Y.C., Withers, P.J., Dahmen, K.A. and Liaw, P.K., "Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling", Scientific Reports 5, Article number: 10789, 2015. https://doi.org/10.1038/srep10789

93.      Zhao, X. and Shin, Y.C., "Laser-Plasma Interaction and Plasma Enhancement by Ultrashort Double-Pulse Ablation", Applied Physics B, July 2015, Volume 120, Issue 1, pp 81-87. HTTPS://DOI.ORG/ 10.1007/s00340-015-6102-4

94.      Hedberg, G., Shin, Y.C. and Xu, L., "Laser-assisted Milling of Ti-6Al-4V with the Consideration of Surface Integrity", International Journal of Advanced Manufacturing Technology, August 2015, Volume 79, Issue 9-12, pp 1645-1658. DOI 10.1007/s00170-015-6942-4

95.      Ngo, P.D. and Shin, Y.C., "Gain Estimation of Nonlinear Dynamic Systems Modeled by an FBFN and the Maximum Output Scaling Factor for a Self-Tuning PI Fuzzy Controller", Engineering Applications of Artificial Intelligence, Volume 42, June 2015, Pages 1-15. 10.1016/j.engappai.2015.03.004

96.      Tan, W. and Shin, Y.C., "Laser Keyhole Welding of Stainless Steel Thin Plate Stack towards Applications in Fuel Cell Manufacturing", Science and Technology of Welding and Joining, Vol. 20, No. 4, 2015, pp. 313-318. http://dx.doi.org/10.1179/1362171815Y.0000000005

97.      Bailey, N., Tan, W. and Shin, Y.C., "A Parametric Study on Laser Welding of Magnesium Alloy AZ31 by A Fiber Laser", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2015. https://doi.org/10.1115/1.4029052

98.      Tan, W. and Shin, Y.C., "Multi-scale Modeling of Solidification and Microstructure Development in Laser Keyhole Welding Process for Austenitic Stainless Steel", Computational Material Science, Volume 98, 15 February 2015, Pages 446-458. Https://doi.org/10.1016/j.commatsci.2014.10.063

99.      Dong, X. and Shin, Y.C., "Coupled Thermo-mechanical Multi-scale Modeling of Alumina to Predict Thermally Induced Fractures under Laser Heating", Journal of the American Ceramic Society, Volume 98, Issue 3, pages 920-928, March 2015. Https://doi.org/10.1111/jace.13349

100.   Davis, T., Yao, B. and Shin, Y.C., "Adaptive Robust Control of Circular Machining Contour Error using Global Task Coordinate Frame", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 137, 014501 (2015). https://doi.org/10.1115/1.4028634

101.   Luo, M. and Shin, Y.C., "Vision-based Weld Pool Boundary Extraction and Width Measurement during Keyhole Fiber Laser Welding", Optics and Lasers in Engineering, Volume 64, January 2015, Pages 59-70. Https://doi.org/ 10.1016/j.optlaseng.2014.07.004

102.   Zhao, X. and Shin, Y.C., "Ablation Enhancement of Silicon by Ultrashort Double-Pulse Laser Ablation", Applied Physics Letters, 105, 111907 (2014). http://dx.doi.org/10.1063/1.4896350

103.   Tan, W. and Shin, Y.C., "Analysis of Multi-Phase Interaction and Its Effect on Keyhole Dynamics with A Multi-Physics Numerical Model" Journal of Physics, Applied Physics D, 47 (2014) 345501. https://doi.org/10.1088/0022-3727/47/34/345501

104.   Wilson, J.M., Piya, C., Shin, Y.C., Zhao, F. and Ramani, R., "Remanufacturing of Turbine Blades by Laser Direct Deposition with Its Energy and Environmental Impact Analysis", Journal of Cleaner Production, Volume 80, 1 October 2014, Pages 170-178. HTTPS://DOI.ORG/ 10.1016/j.jclepro.2014.05.084

105.   Tian, Y., Kwon, H.J., Shin, Y.C. and King, G.B., "Fabrication and Characterization of Photonic Crystals by Two-Photon Polymerization Using a Femtosecond Laser", Trans. of the ASME, Journal of Micro and Nano-Manufacturing, 2(3), 034501, Sept., 2014. https://doi.org/10.1115/1.4027737

106.   Zhao, X., Cao, Y., Nian, Q., Cheng, G. and Shin, Y.C., "Control of Ablation Depth and Surface Structure in P3 Scribing of Thin-Film Solar Cells by A Picosecond Laser", Trans. of the ASME, Journal of Micro and Nano Manufacturing, 2(3), 031007, Sept., 2014. https://doi.org/10.1115/1.4027733

107.   Ding, H. and Shin, Y.C., "Dislocation Density-based Grain Refinement Modeling of Orthogonal Cutting of Commercially Pure Titanium", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 136 (4), 041003, 2014. https://doi.org/ 10.1115/1.4027207.

108.   Zhao, X., Cao, Y., Shin, Y.C., Cheng, G. and Nian, Q. "Precise Selective Scribing of Thin Film Solar Cells by A Picoseconds Laser", Applied Physics A, August 2014, Volume 116, Issue 2, pp 671-681. DOI : 10.1007/s00339-014-8330-6

109.   Ye, X. and Shin, Y.C., "Synthesis and Characterization of Fe-Based Amorphous Composite by Laser Direct Deposition", Surface and Coatings Technology, Volume 239, 25 January 2014, Pages 34-40. http://dx.doi.org/10.1016/j.surfcoat.2013.11.013

110.   Nof, S., Cheng, G., Weiner, A.M., Chen, X.W., Bechar, A., Jones, M.G., Reed, C.B., Alkan Donmez, A., Weldon, T.D., Bermel, P., Bukkapatnam, S., Cheng, C., Kumara, S.R.T., Bement, A., Koubek, R., Bidanda, B., Shin, Y.C., Capponi, A., Lee, S., Lehto, M.R., Liu, A.L., Nohadani, O., Dantus, M., Lorraine, P.W., Nolte, D.D., Proctor, R.W., Sardesai, H.P., Shi, L., Wachs, J.P., Zhang, X.C. "Laser and Photonic Systems Integration: Emerging Innovations and Framework for Research and Education" Human Factors and Ergonomics in Manufacturing & Service Industries, Vol. 23, Issue 6, pp. 483-516, 2013. HTTPS://DOI.ORG/ 10.1002/hfm.20555

111.   Zhao, X. and Shin, Y.C., "Ablation Dynamics of Silicon by Femtosecond Laser and the Role of Early Plasma", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 135(6), 061015, 2013. https://doi.org/10.1115/1.4025805.

112.   Zhao, X. and Shin, Y.C., "Coulomb Explosion and Early Plasma Generation During Femtosecond Laser Ablation of Silicon at High Laser Fluence", Journal of Physics, Applied Physics D, 46(33), 2013, 335501. https://doi.org/10.1088/0022-3727/46/33/335501

113.   Zhang, M.Y., Nian, Q., Shin, Y, Cheng, G.Y. "Direct Pulsed Laser Crystallization of Nanocrystals for Absorbent Layers in Photovoltaics: Multiphysics Simulation and Experiment", Journal of Applied Physics, 113 (19), 2013, 193506-193506-8. https://doi.org/10.1063/1.4805039

114.   Cao, Y., Zhao, X. and Shin, Y.C., "Analysis of Nanosecond Laser Ablation of Aluminum with and without Phase Explosion in Air and Water" Journal of Laser Applications, Vol. 25, Issue 3, 032002 (2013); https://doi.org /10.2351/1.4794032.

115.   Ding, H. and Shin, Y.C., "Multi-physics Modeling and Simulation of Surface Microstructure Alteration in Hard Turning", Journal of Materials Processing Technology, Vol. 213, Issue 6, June 2013, Pages 877-886. https://doi.org /10.1016/j.jmatprotec.2012.12.016.

116.   Wilson, J.M., Jones, N., Jin, L. and Shin, Y.C., "Laser Deposited Gradient Coatings of Co-Cr-Mo onto Ti-6Al-4V and SS316L Substrates for Biomedical Applications", Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B, 2013, pp. 1124-1132. https://doi.org/ 10.1002/jbm.b.32921

117.   Wou, J., Shin, Y.C., El-Mounayri, H.A., "Ball End Milling Mechanistic Model Based on A Voxel-Based Geometric Representation and A Ray Casting Technique", Journal of Manufacturing Processes, 15, 2013, 338-347. https://doi.org /10.1016/j.jmapro.2012.12.003.

118.   Cao, Y., Shin, Y.C. and R. Byron Pipes, "Etching of Long Fiber Polymeric Composite Materials by Nanosecond Laser Induced Water Breakdown Plasma" Applied Surface Science, Volume 268, 1 March 2013, Pages 6-10. https://doi.org/10.1016/j.apsusc.2012.11.061

119.   Tan, W., Bailey, N. and Shin, Y.C., "Investigation of Keyhole Plume and Molten Pool Based on A Three-Dimensional Dynamic Model with Sharp Interface Formulation", Journal of Physics D: Applied Physics, Volume 46, Number 5, 6 February 2013, 055501. https://doi.org/10.1088/0022-3727/46/5/055501

120.   Dandekar, C.R. and Shin, Y.C., "Multi-scale Modeling of Subsurface Damage in Laser-assisted Machining of Particulate Reinforced Metal Matrix Composite", Journal of Materials Processing Technology, Vol. 213, Issue 2, February 2013, Pages 153-160. https://doi.org /10.1016/j.jmatprotec.2012.09.010

121.   Halani, P., Kaya, I., Shin, Y.C., Karaca, H.E. "Phase Transformation Characteristics and Mechanical Properties of Nitinol Synthesized by Laser Direct Deposition", Materials Science and Engineering, A. Volume 559, 1 January 2013, Pages 836-843. http://dx.doi.org/10.1016/j.msea.2012.09.031

122.   Dandekar, C.R. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Machining of Silicon Carbide Particle Reinforced Aluminum Matrix Composites", International Journal of Advanced Manufacturing Technology, Volume 66, Issue 9 (2013), Page 1603-1610. HTTPS://DOI.ORG/ 10.1007/s00170-012-4443-2

123.   Subrahmanya, N. and Shin, Y.C., "A Data-Based Framework for Fault Detection and Diagnostics of Non-Linear Systems with Partial State Measurement", Engineering Applications in Artificial Intelligence, Volume 26, Issue 1, January 2013, Pages 446-455. Https://doi.org/ 10.1016/j.engappai.2012.09.004

124.   Ngo, P. and Shin, Y.C. "Milling Contour Error Control Using Multilevel Fuzzy Controller", International Journal of Advanced Manufacturing Technology, Volume 66, Issue 9 (2013), Page 1641-1655. HTTPS://DOI.ORG/10.1007/s00170-012-4447-y

125.   Wilson, J.M. and Shin, Y.C., "Microstructure and Wear Properties of Laser-deposited Functionally Graded Inconel 690 Reinforced with TiC", Surface Coatings and Technology, Vol. 207, 25 August 2012, Pages 517-522. https://doi.org/10.1016/j.surfcoat.2012.07.058

126.   Hu, W., Shin, Y.C. and King, G.B., "Characteristics of Plume Plasma and Its Effects on Ablation Depth during Ultrashort Laser Ablation of Copper in Air", Journal of Physics D: Applied Physics, 45, 355204, 2012. https://doi.org/10.1088/0022-3727/45/35/355204

127.   Ding, H. and Shin, Y.C., "A Metallo-thermo-mechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 134, October 2012, 051014. http://dx.doi.org/10.1115/1.4007464

128.   Ding, H. and Shin, Y.C., "Improvement of Machinability of Waspaloy via Laser-assisted Machining", International Journal of Advance Manufacturing Technology, Volume 64, Issue 1-4, January 2013, pp 475-486. HTTPS://DOI.ORG/ 10.1007/s00170-012-4012-8.

129.   Hu, W., Shin, Y.C. and King, G.B., "Investigation of Early Plasma Evolution Induced by Ultrashort Laser Pulses", Journal of Visual Experiments, (65), e4033, HTTPS://DOI.ORG/ 10.3791/4033 (2012).

130.   Tan, W., Bailey, N. and Shin, Y.C., "Numerical Modeling of Transport and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 134, 041010 (2012). http://dx.doi.org/10.1115/1.4007101

131.   Subrahmanya, N. and Shin, Y.C., "A Variational Bayesian Framework for Group Feature Selection", International Journal Machine Learning and Cybernetics, December 2013, Volume 4, Issue 6, pp 609-619. HTTPS://DOI.ORG/ 10.1007/s13042-012-0121-9.

132.   Zhao, X. and Shin, Y.C., "A Two-dimensional Comprehensive Hydrodynamic Model for Femtosecond Laser Pulse Interaction with Metals", Journal of Physics D: Applied Physics, 45 105201, 2012. https://doi.org/10.1088/0022-3727/45/10/105201

133.   Xu, C. and Shin, Y.C., "An Adaptive Fuzzy Controller for MISO Systems with Stability Analysis", IEEE Trans. on Industrial Electronics, Vol. 59, No. 8, pp. 3113-3123, Aug. 2012. 10.1109/TIE.2011.2158033.

134.   Dandekar, C.R. and Shin, Y.C., "Modeling of Machining of Composites: A Review", International Journal of Machine Tools and Manufacture, Volume 57, June 2012, Pages 102-121. http://dx.doi.org/10.1016/j.ijmachtools.2012.01.006

135.   Ding, H. and Shin, Y.C., "Predictive Modeling of Grain Refinement during Multi-step Rolling Processes", Journal of Materials Processing Technology, Volume 212, Issue 5, May 2012, Pages 1003-1013. https://doi.org/10.1016/j.jmatprotec.2011.12.005 

136.   Ding, H., Shen, N. and Shin, Y.C., "Thermal and Mechanical Modeling Analysis of Laser-assisted Micro Milling of Difficult-to-machine Alloys", Journal of Materials Processing Technology, Volume 212, Issue 3, March 2012, Pages 601-613. https://doi.org/10.1016/j.jmatprotec.2011.07.016

137.   Davis, T., Ngo, P. and Shin, Y.C., "Adaptive Fuzzy Logic Control of Friction Stir Welding Axial Force", International Journal of Advanced Manufacturing Technology, Volume 59, Issue 5 (2012), Page 559-567. http://dx.doi.org/10.1007/s00170-011-3522-0

138.   Halani, P. and Shin, Y.C., "In-situ Synthesis and Characterization of Shape Memory Alloy- Nitinol by Laser Direct Deposition", Metallurgical and Materials Transactions, A. Volume 43, Number 2, 2012, 650-657. HTTPS://DOI.ORG/ 10.1007/s11661-011-0890-x

139.   Ding, H. and Shin, Y.C., "Dislocation Density-Based Modeling of Subsurface Grain Refinement with Laser-Induced Shock Compression", Computational Materials Science, Volume 53, Issue 1, February 2012, Pages 79-88. http://dx.doi.org/10.1016/j.commatsci.2011.08.038

140.   Hu, W., Shin, Y.C. and King, G.B., "Effect of Air Breakdown with a Focusing Lens on Ultrashort Laser Ablation", Applied Physics Letter, 99, 234104 (2011). https://doi.org/10.1063/1.3665631.

141.   Hu, W., Shin, Y.C. and King, G.B., "Early-state Plasma Dynamics with Air Ionization during Ultrashort Laser Ablation of Metal", Physics of Plasmas, 18, 093302 (2011). https://doi.org/10.1063/1.3633067.

142.   Wen, S. and Shin, Y.C., "Modeling of Transport Phenomena in Direct Laser Deposition of Metal Matrix Composite", International Journal of Heat and Mass Transfer, Volume 54, Issues 25-26, December 2011, Pages 5319-5326. https://doi.org/10.1016/j.ijheatmasstransfer.2011.08.011

143.   Ding, H., Shen, N. and Shin, Y.C., "Experimental and Numerical Modeling Analysis of Micro Milling of Hardened H13 Tool Steel", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 133, Issue 4, August 2011, 041007. https://doi.org/10.1115/1.4004499.

144.   Ding, H. and Shin, Y.C., "Modeling of Grain Refinement in Aluminum and Copper subject to Cutting", Computational Materials Science, Volume 50, Issue 10, August-September 2011, Pages 3016-3025. Https://doi.org/10.1016/j.commatsci.2011.05.020.

145.   Tan, W., Wen, S., Bailey, N. and Shin, Y.C. "Multi-scale Modeling of Transport Phenomena and Dendritic Growth in Diode Laser Cladding Process", Metallurgical and Materials Transactions B, Volume 42, Issue 6 (2011), Page 1306-1318. HTTPS://DOI.ORG/ 10.1007/s11663-011-9545-y.

146.   Tan, W., Bailey, N. and Shin, Y.C., "A Novel Integrated Model Combining Cellular Automata and Phase Field Methods for Microstructure Evolution during Solidification of Multi-Component and Multi-Phase Alloys", Computational Materials Science. Vol. 50, Issue 9, July 2011, Pages 2573-2585 https://doi.org/10.1016/j.commatsci.2011.03.044

147.   Wen, S. and Shin, Y.C., "Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes", Journal of Laser Applications, 23, 022003 (2011); https://doi.org/10.2351/1.3567962.

148.   Zhao, X. and Shin, Y.C., "Femtosecond Laser Drilling of High Aspect Ratio Microchannels in Glass", Applied Physics A, Volume 104, Number 2, 713-719, 2011. HTTPS://DOI.ORG/ 10.1007/s00339-011-6326-z

149.   Dandekar, C.R. and Shin, Y.C., "Molecular Dynamics Based Cohesive Zone Law for Describing Al-Sic Interface Mechanics", Composites Part A, Volume 42, Issue 4, April 2011, Pages 355-363. http://dx.doi.org/10.1016/j.compositesa.2010.12.005

150.   Dandekar, C.R. and Shin, Y.C., "Effect of Porosity on the Interface Behavior of an Al2o3-Aluminum Composite: A Molecular Dynamics Study", Composites Science and Technology, 71, 2011, pp. 350-356. doi.org/10.1016/j.compscitech.2010.11.029

151.   Xu, C. and Shin, Y.C., "A Self-tuning Multivariable Fuzzy Controller for General Multi-Input Multi-Output Nonlinear Systems", Engineering Applications of Artificial Intelligence, Volume 24, Issue 2, March 2011, Pages 238-250. Https://doi.org/ 10.1016/j.engappai.2010.10.021

152.   Wen, S. and Shin, Y.C. "Modeling of the Laser Direct Deposition Process by a High Power Direct Diode Laser", Trans. of the ASME, J. of Heat Transfer, Volume 133, Issue 3, 031007, March 2011. https://doi.org/10.1115/1.4002447

153.   Rao, B., Dandekar, C.R., and Shin, Y.C., "An Experimental and Numerical Study on the Face Milling of Ti-6Al-4V Alloy", Journal of Materials Processing Technology, Vol. 211, Issue 2, February 2011, Pages 294-304. 10.1016/j.jmatprotec.2010.10.002

154.   Davis, T. and Shin, Y.C., "Vision-Based Clad Height Measurement", Machine Vision and Applications, Vol. 22, No. 1, pp. 129-136, 2011. HTTPS://DOI.ORG/ 10.1007/s00138-009-0240-9.

155.   Hippalgaonkar, R. and Shin, Y.C., "Robust Optimization of Machining Conditions with Tool Life and Surface Roughness Uncertainties", International Journal of Production Research, Volume 49, Issue 13, 2011, Pages 3963 - 3978. doi: 10.1080/00207543.2010.495207

156.   Davis, T., Shin, Y.C. and Yao, B., "Observer-based Adaptive Robust Control of Friction Stir Welding Axial Force", IEEE-ASME Trans. on Mechatronics, Vol. 16, No. 6, Dec. 2011. https://doi.org/ 10.1109/TMECH.2010.2071417 

157.   Cao, Y., Shin, Y.C. and Wu, B., "A Parametric Study on Overlapping Laser Shock Peening of 4140 Steel via Modeling and Experiments", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 132, Issue 6, December 2010, 061010. https://doi.org/10.1115/1.4002850

158.   Hu, W., Shin, Y.C. and King, G.B., "Energy Transport Analysis in Ultra-Short Pulse Laser Ablation through Combined Molecular Dynamics and Monte Carlo Simulation", Physical Review B, 82, 094111, 2010. https://doi.org/10.1103/PhysRevB.82.094111.

159.   Wen, S. and Shin, Y.C. "Modeling of Transport Phenomena during the Coaxial Laser Direct Deposition Process", Journal of Applied Physics, 108, 044908, 2010. https://doi.org/10.1063/1.3474655.

160.   Cao, Y. and Shin, Y.C., "Shock Wave Propagation and Spallation Study in Laser Shock Peening", Trans. of the ASME, Journal of Engineering Materials and Technology, Vol. 132, Issue 4, 041005, October 2010. https://doi.org/10.1115/1.4002048

161.   Dandekar, C. and Shin, Y.C., "Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 6, 061004, 2010. https://doi.org/10.1115/1.4002548

162.   Subrahmanya, N. and Shin, Y.C., "Constructive Training of Recurrent Neural Networks Using Hybrid Optimization", Neurocomputing, Vol. 73, Issues 13-15, August 2010, Pages 2624-2631. https://doi.org/10.1016/j.neucom.2010.05.012

163.   Shelton, J.A. and Shin, Y.C., "Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration", Journal of Micromechanics and Microengineering, Vol. 20, 075012, 2010. https://doi.org/ 10.1088/0960-1317/20/7/075012

164.   Shelton, J.A. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Micro-Milling in a Slotting Configuration", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 2, 021008, April 2010. http://dx.doi.org/10.1115/1.4001142

165.   Hu, W., Shin, Y.C. and King, G.B., "Micromachining of Metals, Alloys and Ceramics by Picosecond Laser Ablation", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 1, 011009, February 2010. https://doi.org/10.1115/1.4000836.

166.   Subrahmanya, N. and Shin, Y.C., "Sparse Multiple Kernel Learning for Signal Processing Applications", IEEE Trans. on Pattern Analysis and Machine Intelligence, Vol. 32 Issue: 5, pp. 788 - 798, May 2010. https://doi.org/10.1109/TPAMI.2009.98.

167.   Dandekar, C. and Shin, Y.C., "Machinability Improvement of Ti6Al4V Alloy via LAM and Hybrid Machining", International Journal of Machine Tools and Manufacture, Volume 50, Issue 2, pp. 174-182, February 2010. https://doi.org/10.1016/j.ijmachtools.2009.10.013.

168.   Ding, H. and Shin, Y.C., "Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis", International Journal of Machine Tools and Manufacture, Volume 50, Issue 1, Pages 106-114, January 2010. https://doi.org/10.1016/j.ijmachtools.2009.09.001

169.   Hu, W., Shin, Y.C. and King, G.B., "Multi-burst Mode Pico-Second Laser Ablation for Improved Material Removal Rate", Applied Physics, A, Volume 98, Number 2, Pages 407-415, February, 2010. HTTPS://DOI.ORG/ 10.1007/s00339-009-5405-x.

170.   Subrahmanya, N., Shin, Y.C. and Meckl, P.H., "A Bayesian Machine Learning Method for Sensor Selection and Fusion with Application to On-Board Fault Diagnostics", Mechanical Systems and Signal Processing, 24, 182-192, 2010.  http://dx.doi.org/10.1016/j.ymssp.2009.06.010.

171.   Barnes, J.E. Shin, Y.C., Brandt, M. and Sun, S., "High Speed Machining of Titanium Alloys", Materials Science Forum Vols. 618-619 (2009), pp 159-163. https://doi.org/10.4028/www.scientific.net/MSF.618-619.159

172.   Lee, C.W. and Shin, Y.C., "Growing Radial Basis Function Networks Using Genetic Algorithm and Orthogonalization", International Journal of Innovative Computing, Information and Control, Vol. 5, Number 11(A), pp. 3933-3948, November 2009. Abstract

173.   Wen, S., Shin, Y.C., Murthy, J.Y. and Sojka, P.E., "Modeling of Coaxial Powder Flow for the Laser Direct Deposition Process", International J. of Heat and Mass Transfer, 52, Issues 23-24, 5867-5877 (2009). https://doi.org/10.1016/j.ijheatmasstransfer.2009.07.018.

174.   Dandekar, C. and Shin, Y.C., "Multi-step 3D Finite Element Modeling of Subsurface Damage in Machining Particulate Reinforced Metal Matrix Composites", Composites, Part A, Volume 40, Issue 8, Pages 1231-1239,  August 2009, https://doi.org/10.1016/j.compositesa.2009.05.017.

175.   Xu, C. and Shin, Y.C., "A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis", Control and Intelligent Systems, Vol. 37, 201-2006, 2009, https://doi.org/10.2316/Journal.201.2009.2.201-2006.

176.   Subrahmanya, N. and Shin, Y.C., "Adaptive Divided Difference Filtering for Simultaneous State and Parameter Estimation", Automatica, 45, 1686-1693, 2009, https://doi.org/10.1016/j.automatica.2009.02.029.

177.   Truesdale, S. and Shin, Y.C., "Microstructural Analysis and Machinability Improvement of Udimet 720 via Cryogenic Milling", International Journal of Machining Science and Technology, Volume 13, Issue 1, pages 1 - 19, January 2009. HTTPS://DOI.ORG/ 10.1080/10910340902776010

178.   Bailey, N., Tan, W. and Shin, Y.C., "Predictive Modeling and Experimental Results for Residual Stresses in Laser Hardening of AISI 4140 Steel by a High Power Diode Laser", Surface and Coatings Technology, Volume 203, Issue 14, 15, pages 2003-2012, April 2009. https://doi.org/10.1016/j.surfcoat.2009.01.039 

179.   Wu, B. and Shin, Y.C., "A Simplified Model for High Fluence Ultra-short Pulsed Laser Ablation of Semiconductors and Dielectrics", Applied Surface Science, Volume 255, Issue 9, 4996-5002, February 2009. https://doi.org/10.1016/j.apsusc.2008.12.051 

180.   Li, H. and Shin, Y.C., "Integration of Thermo-Dynamic Spindle and Machining Simulation Models for A Digital Machining System", International Journal of Advanced Manufacturing Technology, 40:648-661, 2009. https://doi.org/ 10.1007/s00170-008-1394-8.

181.   Xu, C. and Shin, Y.C., "A Fuzzy Inverse Model Construction Method for a MISO System", IEEE Trans. on Fuzzy Systems, Vol. 15, No. 5, pp. 1216-1231, 2008. https://doi.org/10.1109/TFUZZ.2008.924336.

182.   Dandekar, C. and Shin, Y.C., "Multiphase Finite Element Modeling of Machining Unidirectional Composites: Prediction of Debonding and Fiber Damage", Trans. of the ASME, J. of Manufacturing Science and Engineering 130, 051016 (2008). https://doi.org/10.1115/1.2976146

183.   Subrahmanya, N. and Shin, Y.C., "Automated Sensor Selection and Fusion for Monitoring and Diagnostics of Plunge Grinding Processes", Trans. of the ASME, J. of Manufacturing Science and Engineering Vol. 130, 031014, June, 2008. https://doi.org/10.1115/1.2927439

184.   Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride and Inconel 718", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031013, June, 2008. https://doi.org/10.1115/1.2927447

185.   Xu, C. and Shin, Y.C., "An Adaptive Fuzzy Controller for Constant Cutting Force in Endmilling Processes", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031001-1-10, June, 2008. https://doi.org/ 10.1115/1.2823070

186.   Lakhkar, R., Shin, Y.C. and Krane, M., "Modeling of Laser Hardening and Backtempering of 4140 Steel and Optimization of Overlapping Patterns" Materials Science and Engineering, A, 480, pp. 209-217, 2008. https://doi.org/10.1016/j.msea.2007.07.054

187.   Choi, T., Subrahmanya, N., Li, H. and Shin, Y.C., "Practical Generalized Models for Cylindrical Grinding Processes", International Journal of Machine Tools and Manufacture, 48, 61-72, 2008. https://doi.org/ 10.1016/j.ijmachtools.2007.07.010

188.   Wu, B., and Shin, Y.C., "A Simple Two-Stage Model for the Formation and Expansion of the Plasma Induced by High Intensity Laser Metal Ablation in Vacuum", Physics Letters A, 371, pp. 128-134, 2007. https://doi.org/10.1016/j.physleta.2007.01.096 

189.   Wu, B., Shin, Y.C., Pakhal, H., Laurendeau, N.M. and Lucht, R.P., "Modeling of the Plasma Induced by High-Power Nanosecond Laser-Metal Interactions in Air and Its Experimental Verification" Physical Review E, 76, 026405, 2007. 10.1103/PhysRevE.76.026405

190.   Xu, C. and Shin, Y.C., "Interaction Analysis for MIMO Nonlinear Systems based on a FBFN model", Fuzzy Sets and Systems, Vol. 158, 2013-2025, 2007.  https://doi.org/10.1016/j.fss.2007.02.012 

191.   Xu, C. and Shin, Y.C., "Control of Cutting Force for Creep-feed Grinding Processes using a Multi-level Fuzzy Controller", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 129, No. 4, pp. 480-492, 2007. https://doi.org/10.1115/1.2718238

192.   Wu, B., and Shin, Y.C., "Two-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening", J. of Applied Physics, 101, 103514, 2007. https://doi.org/10.1063/1.2734538

193.   Li, H. and Shin, Y.C., "A Time Domain Dynamic Simulation Model for Stability Prediction of Infeed Centerless Grinding Processes", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 3, pp. 539-550, 2007. https://doi.org/10.1115/1.2716729

194.   Tian, Y. and Shin, Y.C., "Thermal Modeling and Experimental Evaluation of Laser-assisted Dressing of Superabrasive Grinding Wheels, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 221(4), pp. 605-616, 2007. https://doi.org/10.1243/09544054JEM713

195.   Subrahmanya, N., Choi, T. and Shin, Y.C., "Model-Based Optimization of the OD Plunge Grinding Process via Generalized Intelligent Grinding Advisory System (GIGAS)", Trans. of the North American Manufacturing Research Institution, Vol. 35, pp. 489-496, 2007.

196.   Tian, Y. and Shin, Y.C., "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 287-295, 2007. https://doi.org/10.1115/1.2673595

197.   Li, H. and Shin, Y.C., "A Study on Chatter Boundaries of Cylindrical Plunge Grinding Processes with Process Condition Dependent Dynamics", International Journal of Machine Tools and Manufacture, vol. 47, No. 10, pp. 1563-1572, 2007. https://doi.org/10.1016/j.ijmachtools.2006.11.009 

198.   Hahn, J.D., Shin, Y.C. and Krane, M., "Laser Transformation Hardening of Ti6Al4V in the Solid State with an Accompanying Kinetic Model" Surface Engineering, Vol. 23, No. 2, pp. 78-82, 2007. 10.1179/174329407X169467

199.   Wu, B. and Shin, Y.C., "From Incident Laser Pulse to Residual Stress: A Complete and Self-closed Model for Laser Shock Peening", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 117-125, 2007. https://doi.org/10.1115/1.2386180

200.   Choi, T. and Shin, Y.C., "Generalized Intelligent Grinding Advisory System", International Journal of Production Research, Vol. 45, No. 8, pp. 1899-1932, April, 2007. HTTPS://DOI.ORG/ 10.1080/00207540600562025

201.   Wu, B., and Shin, Y.C., "A Simple Model for High Fluence Ultra-short Pulsed Laser Metal Ablation", Applied Surface Science, 253, pp. 4079-4084, 2007. https://doi.org/10.1016/j.apsusc.2006.09.007

202.   Wu, B., and Shin, Y.C., "A One-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening", J. of Applied Physics, 101, No. 2, 023510, 2007. https://doi.org/10.1063/1.2426981

203.   Patwa, R. and Shin, Y.C., "Laser Hardening of AISI5150H Steels", International Journal of Machine Tools and Manufacture, Vo. 47, No. 2, pp. 307-320, February 2007. https://doi.org/10.1016/j.ijmachtools.2006.03.016

204.   Tian, Y. and Shin, Y.C., "Laser-assisted Burnishing", International Journal of Machine Tools and Manufacture. Volume 47, Issue 1, Pages 14-22, January 2007. https://doi.org/10.1016/j.ijmachtools.2006.03.002

205.   Anderson, M. and Shin, Y.C., "Laser-assisted Machining of P550 with an Economic Analysis", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 12, pp. 2055-2067, 2006. https://doi.org/ 10.1243/09544054JEM562

206.   Skvarenina, S., and Shin, Y.C., "Predictive Modeling of Laser Hardening of Complex Surfaces", Surface and Coatings Technology, Volume 201, Issue 6, pp. 2256-2269, December 2006. https://doi.org/10.1016/j.msea.2007.07.054

207.   Tian, Y. and Shin, Y.C., "Laser-assisted Machining of Silicon Nitride with Complex Geometric Features via In-process Control", Journal of the American Ceramic Society, Vol. 89, issue 11, pp. 3397-3405, 2006. https://doi.org/ 10.1111/j.1551-2916.2006.01265.x

208.   Wu, B., and Shin, Y.C., "Absorption Coefficient of Aluminum near the Critical Temperature and the Consequences on High Power Nanosecond Laser Ablation", Applied Physics Letters, 89, 111902, 2006. https://doi.org/10.1063/1.2352804

209.   Zhang, X.R, Fisher, T.S., Shin, Y.C., Hirleman, E.D. and Pfefferkorn, F.E., "Integration of Microscale Fabrication in an Undergraduate Manufacturing Elective", International Journal of Engineering Education, Vol. 22, No. 2, 2006.

210.   Anderson, M., Patwa, R. and Shin, Y.C., "Laser-assisted Machining of Inconel 718 with an Economic Analysis", International Journal of Machine Tools and Manufacture, 46, pp. 1879-1891, Nov. 2006. https://doi.org/10.1016/j.ijmachtools.2005.11.005

211.   Tian, Y. and Shin, Y.C., " Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features", ASME Journal of Manufacturing Science and Engineering, Vol. 128, pp. 425-434, May 2006. http://dx.doi.org/10.1115/1.2162906

212.   Wu, B. and Shin, Y.C., "Modeling of Nanosecond Laser Ablation with Vapor Plasma Formation", Journal of Applied Physics, 99, 084310, 2006. https://doi.org/10.1063/1.2190718

213.   Li, H. and Shin, Y.C., "Wheel Regenerative Chatter of Surface Grinding", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 393-403, May 2006. http://dx.doi.org/10.1115/1.2137752

214.   Skvarenina, S. and Shin, Y.C., "Laser-assisted machining of Compacted Graphite Iron with Microstructural Analysis", International Journal of Machine Tools and Manufacture, Vol. 46, 7-17, 2006. https://doi.org/10.1016/j.ijmachtools.2005.04.013

215.   Wu, B. and Shin, Y.C., "Laser Pulse Transmission through the Water Breakdown Plasma in Laser Shock Peening", Applied Physics Letters, 88, 041116, 2006. https://doi.org/10.1063/1.2168022

216.   Li, H. and Shin, Y.C., "Predictive Chatter Model of Cylindrical Grinding Processes", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 404-415, May 2006. https://doi.org/ http://dx.doi.org/10.1115/1.2118748

217.   Li, H. and Shin, Y.C., "A Comprehensive Dynamic End Milling Simulation Model", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 86-95, Feb. 2006. https://doi.org/ http://dx.doi.org/10.1115/1.2035694

218.   Wu, B. and Shin, Y.C., "A Self-closed Thermal Model for Laser Shock Peening under the Water Confinement Regime Configuration and Comparisons to Experiments", Journal of Applied Physics, Vol. 97, Issue 11, pp. 113517-1-11, 2005.

219.   Xu, C. and Shin, Y.C., " Design of a Multi-level Fuzzy Controller for Nonlinear Systems and Stability Analysis", IEEE Trans. on Fuzzy Systems, Vol. 13, No. 6, pp. 761-778, Dec. 2005.

220.   Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining", International Journal of Heat and Mass Transfer, Volume 48, Issue 10, pp. 1999-2012, May 2005.

221.   Lee, C.W. and Shin, Y.C., "Modeling of Complex Manufacturing Processes by Fuzzy Basis Function Networks With Application to Grinding Processes", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 126, pp. 880-890, Dec. 2004.

222.   Tian, Y. and Shin, Y.C., "Finite Element Modeling of Machining of 1020 Steel Including the Effects of Round Cutting Edge" Transactions of the North American Manufacturing Research Institution, Vol. 32, pp. 111-118, June 2004.

223.   Li, H. and Shin, Y.C., "Analysis of Bearing Configuration Effects on High Speed Spindles Using an Integrated Dynamic Thermo-mechanical Spindle Model", International Journal of Machine Tools and Manufacture, Vol. 44, pp. 347-364, 2004.

224.   Li, H. and Shin, Y.C., "Integrated Thermo-dynamic Modeling of High Speed Spindles: Part 2- Solution Procedure and Validations", Trans. of the ASME, Journal of Manufacturing Science and Engineering,, Vol. 126, No. 1, pp. 159-168, Feb. 2004.

225.   Li, H. and Shin, Y.C., "Integrated Thermo-dynamic Modeling of High Speed Spindles: Part 1- Model Development", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 148-158, Feb. 2004.

226.   Rebro, P.A., Shin, Y.C. and Incropera, F.P., "Design of Operating Conditions for Crackfree Laser-assisted Machining of Mullite", International Journal of Machine Tools and Manufacture, Vol. 44, pp. 677-694, 2004.

227.   Pfefferkorn, F.E., Shin, Y.C., Incropera, F.P. and Tian, Y., "Laser-Assisted Machining of Partially Stabilized Zirconia", Trans. of the ASME Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 42-51, Feb. 2004.

228.   Wang, Z.Y., Rajurkar, K.P., Fan, J., Lei, S., Shin, Y.C. and Petrescu, G., "Hybrid Machining of Inconel 718, International Journal of Machine Tools and Manufacture, Vol. 43, Issue 13, pp. 1287-1396, October 2003.

229.   Lee, C.W. and Shin, Y.C., "Construction of Fuzzy Systems Using Least-Squares Method and Genetic Algorithm", Fuzzy Sets and Systems, Vol. 137, pp. 297-323, 2003.

230.   Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry", Trans. of the ASME, Journal of Heat Transfer, Vol. 125, No. 1, pp. 48-56, Feb. 2003.

231.   Lee, C.W., Choi, T.J., Shin, Y.C., "Intelligent Model-based Optimization of the Surface Grinding Process for Heat-Treated 4140 Steel Alloys with Aluminum Oxide Grinding Wheels," Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 125, pp. 65-76, February 2003.

232.   Choi, T.J. and Shin, Y.C., "On-line Chatter Detection Using Wavelet-Based Parameter Estimation", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 125, pp. 21-28, February 2003.

233.   Zhang, C. and Shin, Y.C., "Wear of diamond dresser in laser assisted truing and dressing of vitrified CBN wheels", International Journal of Machine Tools and Manufacture, Vol. 43, Issue 1, Pages 41-49, 2003.

234.   Bowman K.J., F.E. Pfefferkorn, and Y.C. Shin, "Recrystallization Textures during Laser-Assisted Machining of Zirconia Ceramics," Materials Science Forum, Vols. 408-412, pp. 1669-1674, Trans Tech Publications, Switzerland, 2002.

235.   Hong, S.W., Kang, J.O. and Shin, Y.C., "Dynamic Characteristics of Indeterminate Rotor Systems with Angular Contact Bearings Subject to Axial and Radial Loads", International Journal of the Korean Society of Precision Engineering, Vol. 3, No. 2, pp. 61-71, April 2002.

236.   Rao, B. and Shin, Y.C., "Analysis of Three-dimensional Machining Using an Extended Oblique Machining Theory", Journal of Machining Science and Technology, Vol. 6, No. 2, pp. 187-213, 2002.

237.   Rebro, P., Shin, Y.C. and Incropera, F.P., "Laser Assisted Machining of Reaction Sintered Mullite Ceramics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 124,pp. 875-885, Nov. 2002.

238.   Clancy, B.E. and Shin, Y.C., "A Comprehensive Chatter Prediction Model for Face Turning Operation Including the Tool Wear Effect", International Journal of Machine Tools and Manufacture, Vol. 42, Issue 9, pp. 1035-1044, 2002.

239.   Zhang, C. and Shin, Y.C., "A Novel Laser-assisted Truing and Dressing Technique for Vitrified CBN Wheels", International Journal of Machine Tools and Manufacture, Vol. 42, Issue 7, pp. 825-835, 2002.

240.   Clancy, B.E., Rao, B. and Shin, Y.C., "Time Domain Chatter Prediction Including Tool Wear Effects During Face Turning of Nickel-based Super Alloys", Transactions of the North American Manufacturing Research Institution, Vol. 30, pp. 377-384, May 2002.

241.   Rebro, P.A., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., "Comparative Assessment of Laser-assisted Machining for Various Ceramics", Transactions of the North American Manufacturing Research Institution, Vol. 30, pp. 153-160, May 2002.

242.   Lei, S., Shin, Y.C. and Incropera, F.P., "Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 123, pp. 639-646, November 2001.

243.   Rao, B. and Shin, Y.C., "High Speed Machining of 7075-T6 Aluminum Using Carbide and Diamond Tools, International Journal of Machine Tools and Manufacture. Vol. 41/12, pp. 1763-1781, June 2001.

244.   Clancy, B.E., Rao, B. and Shin, Y.C., "Mechanistic Force Modeling With Time-Dependent Characteristics Due To Tool Wear For Face Turning of Ni-Based Super Alloys", Transactions of the North American Manufacturing Research Institution, Vol. 29, pp. 311-318, May 2001.

245.   Leshock, C.E., Kim, J. N., and Shin, Y.C., "Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results", International Journal of Machine Tools and Manufacture, 41/6, pp. 877-891, March 2001.

246.   Shin, Y.C., Lee, C.W., Choi, T.J., Hu, S., "Intelligent Control via Open Architecture Controller", Abrasives Magazine, October/November, pp. 26-35, 2000.

247.   Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., "Laser Assisted Machining: Its Potential and Future", Machining Technology, featured article, Vol. 11, No. 3, pp. 1-7, Third quarter, 2000.

248.   Shamine, D.M. and Shin, Y.C., "Effects of Axial and Radial Loading on No. 50 Taper Joint Stiffness", Journal of Manufacturing Processes, SME, Vol. 2, No. 3, Sept. 2000.

249.   Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., "Thermally (Laser and Plasma) Assisted Machining: Its Potential and Future", Abrasives Magazine, April/May, pp. 16-30, 2000.

250.   Lei, S., Shin, Y.C. and Incropera, F.P., "Deformation Mechanisms and Constitutive Modeling for Silicon Nitride Undergoing Laser Assisted Machining", International Journal of Machine Tools and Manufacture, Vol. 40, No. 15, pp. 2213-2233, 2000.

251.   Lee, C.W. and Shin, Y.C., "Evolutionary Modeling and Optimization of Grinding Processes" International Journal of Production Research, 2000, Vol. 38, No. 12, pp. 2787-2813, 2000.

252.   Rozzi, J.C., Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 122, pp. 666-670, Nov. 2000.

253.   Shamine, D.M., Hong, S.W. and Shin, Y.C., "Experimental Identification of Dynamic Parameters of Rolling Element Bearings in Machine Tools", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 122, pp. 95-101, March 2000.

254.   Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of a Silicon Nitride Ceramic: Part II - Assessment of Parametric Effects", International J. of Heat and Mass Transfer, 43, pp. 1425-1437, 2000.

255.   Rozzi, J.C., Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of a Silicon Nitride Ceramic: Part I- Comparison with Measured Surface Temperature Histories", International J. of Heat and Mass Transfer, 43, pp. 1409-1424, 2000.

256.   Shamine, D.M., Hong, S.W. and Shin, Y.C., "An In-situ Modal Based Method for Structural Dynamic Joint Parameter Identification", Proceedings of the Institution of Mechanical Engineers, Part C. Journal of Mechanical Engineering Science, Vol. 214 Part C, pp. 1-13, 2000.

257.   Elanayar V.T., S. and Shin, Y.C., "State Estimation of Continuous Time Radial Basis Function Networks", Automatica, Vol. 36/3, pp. 399-407, 2000.

258.   Lei, S., Shin, Y.C. and Incropera, F.P., "Constitutive Modeling of Material Deformation Under High Strain Rates and Temperatures through Orthogonal Machining Tests", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 577-585, November, 1999.

259.   Jensen, S.A. and Shin, Y.C., "Stability Analysis in Facemilling Operation: Part 2 - Experimental Validation and Influencing Factors", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 606-614, November, 1999.

260.   Jensen, S.A. and Shin, Y.C., "Stability Analysis in Facemilling Operation: Part 1 - Theory for Stability Lobe Prediction", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 600-605, November, 1999.

261.   Rao, B. and Shin, Y.C., "A Comprehensive Dynamic Cutting Force Model for Chatter Prediction in Turning", International Journal of Machine Tools and Manufacture, Vol. 39, Issue 10, pp. 1631-1654, 1999.

262.   Hong, S.W, Shamine, D.M. and Shin, Y.C., "An In-Situ Identification Method for Joint Parameters in Mechanical Structures", Trans. of the ASME, Journal of Vibration and Acoustics, Vol. 121, No. 3, pp. 363-372, July 1999.

263.   Shamine, D.M. and Shin, Y.C., "Effects of Axial and Radial Loading on No. 50 Taper Joint Stiffness", Transactions of the North American Manufacturing Research Institution of SME, Vol. 27, pp. 111-116, May 1999.

264.   Vishnupad, P.S. and Shin, Y.C., "Adaptive Tuning of Membership Functions for Non-linear Optimization Using Gradient Descent Method", Journal of Intelligent and Fuzzy Systems, Volume 7, Issue 1, pp. 13-25, March 1999.

265.   Lei, S., Shin, Y.C. and Incropera, F.P., "Thermo-Mechanical Modeling of Orthogonal Machining Processes by Finite Element Analysis", International Journal of Machine Tools and Manufacture, Vol. 39, Issue 5, pp. 731-750, February 1999.

266.   Vishnupad, P.S. and Shin, Y.C., "Intelligent Optimization of Grinding Processes using Fuzzy Logic", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 212, pp. 647-660, 1998.

267.   Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to Translating Laser Heat Source: Part II-Parametric Effects and Assessment of a Simplified Model", Trans. of the ASME, Journal of Heat Transfer, Vol. 120, No. 4, pp. 907-915, November 1998.

268.   Rozzi, J.C., Pfefferkorn, F. E., Incropera, F.P. and Shin, Y.C., "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to Translating Laser Heat Source: Part I-Comparison of Surface Temperature Measurements with Theoretical Results", Trans. of the ASME, Journal of Heat Transfer, Vol. 120, No. 4, pp. 899-906, November 1998.

269.   Shin, Y.C. and Waters, A.J., "Framework for a Machining Advisory System with Application to Facemilling Operation", Journal of Intelligent Manufacturing, Vol. 9, No.3, pp. 225-234, June 1998.

270.   Jorgensen, B.R. and Shin, Y.C., "Robust Modeling of High Speed Spindle Dynamics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, pp. 387-394, May 1998.

271.   Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness Utilizing Ultrasound", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 1, pp. 197-200, February 1998.

272.   Pfefferkorn, F., Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement in Laser Assisted Machining Processes", Experimental Heat Transfer, Vol. 10, pp. 291-313, 1997.

273.   Leshock, C.E. and Shin, Y.C., "Study on the Tool Temperature in Turning by a Tool-Work Thermocouple Technique", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 119, No. 4, pp. 502-508, November 1997.

274.   Jorgensen, B.R. and Shin, Y.C., "Dynamics of Machine Tool Spindle/Bearing Sy stems under Thermal Growth", Trans. of the ASME, Journal of Tribology, Vol. 119, No. 4, pp. 875-882, October 1997.

275.   Shin, Y.C. and Waters, A.J., "An Improved Method to Determine Cutting Force Coefficients for Mechanistic Modeling of Machining Processes", International Journal of Machine Tools and Manufacture Vol. 37, No. 9, pp. 1337-1351, August 1997.

276.   Rober, S., Shin, Y.C. and Nwokah, O.D.I., "A Robust Controller for Cutting Force Control in the End Milling Process", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 119, No.2, pp. 146-152, June 1997.

277.   Shin, Y.C., Jensen, S.A. and Jorgensen, B.R., "Dynamic Behavior Structural Components in Machining Systems Under Operating Conditions", Transactions of the North American Manufacturing Research Institution of SME, Vol. 25, pp. 207-212, May 1997.

278.   Novak, J.W., Shin, Y.C., and Incropera, F.P., "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 119, Vol. 1, pp. 125-129, Feb. 1997.

279.   Oh, S.J., Shin, Y.C. and Furgason, E.S., "Measurement and Characterization of Milled Surface Profiles with Ultrasonic Waves", Measurement, J. of the International Measurement Confederation, Vol. 17, No. 1, pp. 59-72, 1996.

280.   Shin, Y. and Vishnupad, P., "Neuro-fuzzy Control of Complex Manufacturing Processes", International J. of Production Research, Vol. 34, No. 12, pp. 3291-3309, 1996.

281.   Coker, S.A. and Shin, Y.C., "In-process Control of Surface Roughness Due to Wear Using a New Ultrasonic System", International J. of Machine Tools and Manufacture, Vol. 36, No. 3, pp. 411-422, March, 1996.

282.   Elanayar, S.V.T. and Shin, Y.C., "Modeling of Tool Forces for Worn Tools: Flank Wear Effects", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 359-366, August, 1996.

283.   Rober, S. and Shin, Y.C., "Adaptive Control of Cutting Force for Endmilling Processes using a Modified MRAC Scheme", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 339-347, August, 1996.

284.   Elanayar, S.V.T. and Shin, Y.C., "Robust Tool Wear Monitoring using Radial Basis Function Neural Network", Trans. of the ASME, J. of Dynamic Systems, Measurement and Control, Vol. 117, pp. 459-467, December, 1995.

285.   Shin, Y.C., Oh, S.J., and Coker, S.A., "Surface Roughness Measurement by Ultrasonic Sensing for In-process Monitoring", Trans. of the ASME, J. of Engineering for Industry, Vol. 117, pp. 439-447, August 1995.

286.   Nguyen, T., Furgason, E.S. and Shin, Y.C., "Feasibility Assessment of Residual Stress Measurement by an Ultrasonic Technique", Trans. of the North American Manufacturing Research Institution, pp. 287-292, May, 1995.

287.   Rober, S. and Shin, Y.C., "Modeling and Control of CNC Machines Using a PC-Based Open Architecture Controller", Mechatronics, Vol. 5, No. 4, pp. 401-420, 1995.

288.   Oh, S.J., Shin, Y.C. and Furgason, E.S., "Surface Roughness Evaluation via Ultrasonic Scanning", IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 41, No. 6, pp. 1-9, Nov. 1994.

289.   Shin, Y.C. and Waters, A.J., "Face Milling Process Modeling with Bearing Nonlinearity", Trans. of the North American Manufacturing Research Institution, Vol. 22, pp. 157-163, May 1994.

290.   Chen, C.H., Wang, K.W. and Shin, Y.C., "An Integrated Approach toward the Modeling and Dynamic Analysis of High Speed Spindles - Part I", Trans. of the ASME, J. of Vibration and Acoustics, Vol. 116, pp. 506-513, October, 1994.

291.   Elanayar, S. and Shin, Y.C., "Radial Basis Function Neural Network for Approximation and Estimation of Nonlinear Stochastic Dynamic Systems", IEEE Trans. on Neural Networks, Vol. 5, No. 4, pp. 594-603, July 1994.

292.   Shin, Y.C. and Betts, C.A., "Control of Chips in the Turning of 4150 Steel by Using an Obstruction Type Chip Breaker", Trans. of the ASME, Journal of Engineering for Industry, Vol. 115, No.1, pp. 160-163, 1993.

293.   Shin, Y.C. and Joo, Y.S., "Optimization of Machining Conditions with Practical Constraints", International Journal of Production Research, Vol. 30, No. 12, pp. 2907-2919, 1992.

294.   Shin, Y.C. and Wei, Y., "A Statistical Analysis of Positional Accuracy for Multi Axis Machine Tools", Precision Engineering, Vol. 14, No.3 1992, pp. 139-146.

295.   Shin, Y.C., Chen, Y.T. and Kumara, S., "Framework of an Intelligent Grinding Process Optimizer", Journal of Intelligent Manufacturing, Vol. 3, 1992, pp. 135-148.

296.   Shin, Y.C. "Bearing Non-linearity and Stability Analysis in High Speed Machining", Trans. of the ASME, Journal of Engineering for Industry, Vol. 114, No.1, 1992, pp. 23-30.

297.   Wang, K.F., Shin, Y.C. and Chen, C.H., "On the Natural Frequencies of High-Speed Spindles with Angular Contact Bearings", Proceedings of Inst. of Mechanical Engineers, Part C: J. of Mechanical Engineering Science, Vol. 205, Issue C3, 1991, pp. 147-154.

298.   Shin, Y.C., Chin, H.C. and Brink, M.J., "Characterization of CNC Machining Centers", J. of Manufacturing Systems, Vol. 10, No. 5, 1991, pp. 407-421.

299.   Shin, Y.C., S.J. Oh, C.O. Ruud, "Machining Condition Monitoring by an X-ray Diffraction Technique", Trans. of the North American Manufacturing Research Institution/SME, Vol. 19, 1991, pp. 136-141.

300.   Shin, Y.C. and Wang, K.F., "Design of an Optimal Damper to Minimize the Vibration of Machine Tool Structures Subject to Random Excitation", Journal of Engineering with Computers, Vol. 7, No. 4, 1991, pp. 199-208.

301.   Shin, Y.C., "Static and Dynamic Characteristics of a Two Stage Pilot Relief Valve", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 113 No. 2, June 1991, pp. 280-288.

302.   Shin, Y.C., K.W. Wang, Chen, C.H., "Dynamic Analysis and Modeling of a High Speed Spindle System", Trans. of North American Manufacturing Research Institution/SME, Vol. 18, May 1990, pp. 298-304.

303.   Shin, Y.C., "System Identification of Multivariate Systems with Feedback", Trans. of the ASME, J. of Dynamic Systems, Measurement, and Control, June 1990, Vol. 112, pp. 283-291.

 

Back to Top

Refereed Conference Proceedings (Recent several years only)

-        Malekipour, E, Valladares, H, Jahan, S., Shin, Y, & El-Mounayri, H. " Predicting Temperature Field in Powder-Bed Fusion (PBF) Additive Manufacturing Process Using Radial Basis Neural Network (RBNN)" Conference Proceedings of the Society for Experimental Mechanics Series, Pages 57-64, 2022. SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2021Virtual, Online, 14 June 2021 through 17 June 2021. https://doi.org/10.1007/978-3-030-86745-4_8

-        Malekipour, E, Valladares, H, Shin, Y, & El-Mounayri, H. "Optimization of Chessboard Scanning Strategy Using Genetic Algorithm in Multi-Laser Additive Manufacturing Process." Proceedings of the ASME 2020 International Mechanical Engineering Congress and Exposition. Volume 2A: Advanced Manufacturing. Virtual, Online. November 16-19, 2020. IMECE2020-24581, V02AT02A054; 7 pages. https://doi.org/10.1115/IMECE2020-24581

-        Lei, S., Zhao, X., Yu, X., Hu, A., Vukelic, S., Jun, M.B.G., Joe, H.E., Yao, Y.L., Shin, Y.C, "Ultrafast laser applications in manufacturing processes: A state of the art review", ASME 2019 14th International Manufacturing Science and Engineering Conference, MSEC 2019, Volume 2, Erie; United States; 10 June 2019 through 14 June 2019.

-        Jahan, S., El-Mounayri, H., Tovar, A., Shin, Y.C., "A Framework for Estimating Mold Performance Using Experimental and Numerical Analysis of Injection Mold Tooling Prototypes" Conference Proceedings of the Society for Experimental Mechanics Series 2019, Pages 71-76, SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2018; Greenville; United States; 4 June 2018 through 7 June 2018.

-        Ajri, A. and Shin, Y.C., "Investigation on the Effects of Process Parameters on Defect Formation in Friction Stir Welded Samples via Predictive Numerical Modeling and Experiments", ASME International Conf. on Manuf. Science and Engineering, MSEC2017-3092, June 4-9, 2017, Los Angeles, California.

-        Katinas, C., Shang, W., Shin, Y.C., Chen, J. "Modeling Particle Spray for Direct Laser Deposition Using a Four Nozzle Powder Injection System" ASME International Conf. on Manuf. Science and Engineering, MSEC2017-2974, June 4-9, 2017, Los Angeles, California.

-        Moghaddam, N.D., Tao, S., Wu, B., and Shin, Y.C., "Amplification of Plasma at Different Initial Temperatures inside a Microhole by a Short Laser Pulse and the Effect on the Hole Sidewall", Proceedings of the North American Manufacturing Research Institution of SME. Procedia Manufacturing 5. 2016, pp. 724-733, Blacksburg, VA.

-        Bailey, N., Tan, W. and Shin, Y.C., "A parametric study on laser welding of magnesium alloy AZ31 by a fiber laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-4165, June 9-13, 2014, Detroit, MI.

-        Zhao, X., Cao, Y.F., Nian, Q., Cheng, G. and Shin, Y.C., "Control of Ablation Depth and Surface Structure in P3 Scribing of Thin-Film Solar Cells by A Picosecond Laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-4042, June 9-13, 2014, Detroit, MI.

-        Dong, X. and Shin, Y.C., "Multi-Scale Finite Element Modeling of Alumina Ceramics Undergoing Laser-Assisted Machining", ASME International Conf. on Manuf. Science and Engineering, MSEC2014-3956, June 9-13, 2014, Detroit, MI.

-        Tian, Y., Shin, Y.C. and King, G.B., "Fabrication and Characterization of Photonic Crystals by Two-photon Polymerization Using a Femtosecond Laser", ASME International Conf. on Manuf. Science and Engineering, MSEC2013-1126, June 10-14, 2013, Madison, Wisconsin.

-        Davis, T.A., Shin, Y.C. and Yao, B., "Adaptive Robust Control of Circular Machining Contour Error Using Global Task Coordinate Frame", ASME International Conf. on Manuf. Science and Engineering, MSEC2013-1108, June 10-14, 2013, Madison, Wisconsin.

-        Zhao, X. and Shin, Y.C., "Ablation Dynamics of Silicon by Femtosecond Laser and the Role of Early Plasma", ASME International Conf. on Manuf. Science and Engineering, MSEC2013-1107, June 10-14, 2013, Madison, Wisconsin.

-        Cao, Y., Zhao, X. and Shin, Y.C., "Analysis of Nanosecond Laser Ablation of Aluminum with and without Phase Explosion in Air and Water" Paper (M1103), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Sept. 24-27, 2012, Anaheim, CA.

-        Ding, H., Shin, Y.C., A Metallo-Thermo-Mechanically Coupled Analysis of Orthogonal Cutting Of Aisi 1045 Steel", MSEC2012-7300, ASME 2012 International Manufacturing Science and Engineering Conference, South Bend, June 4-8, 2012.

-        Wou, J., Shin, Y.C., El-Mounayri, H.A., "Ball End Milling Mechanistic Model Based on A Voxel-Based Geometric Representation and A Ray Casting Technique", NAMRC40-7780, 40th North American Manufacturing Research Conference, South Bend, June 4-8, 2012.

-        Wilson, J.M., Piya, C., Murray, V., Shin, Y.C., Zhao, F., Ramani, K. "Laser-Based Remanufacturing of Engineering Components and Its Environmental Impact Analysis" Paper (1406), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Oct. 23-27, 2011, Orlando, FL.

-        Schoeffel, K. and Shin, Y.C., "Laser Direct Deposition of Nickel-Based Metal Matrix Composite" Paper (1707), Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), Oct. 23-27, 2011, Orlando, FL.

-        Cao, Y. and Shin, Y.C., "Predictive Self-closed Modeling of Laser Shock Peening and Parametric Study", Proceedings of the 11st International Conference on Shot Peening, September 12-15, 2011, in South Bend, Indiana, USA.

-        Piya, C., Wilson, J.M., Murugappana, S., Shin, Y.C. and Ramani, K. "Virtual Repair: Geometric Reconstruction For Remanufacturing Gas Turbine Blades", Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Design for Manufacturing and the Life Cycle Conference, IDETC/DFMLC 2011, August 29 - 31, 2011, Washington, DC, USA.

-        Tan, W., Wen, S., Bailey, N.S. and Shin, Y.C., "Numerical Modeling of Transport and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel", ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50219, June 13-17, 2011, Corvallis, Oregon.

-        Ding, H. and Shin, Y.C., "Dislocation density-based grain refinement modeling of orthogonal cutting of commercially pure titanium", ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50220, June 13-17, 2011, Corvallis, Oregon.

-        Ding, H., Shen, N. and Shin, Y.C., "Experimental and numerical modeling analysis of micro-milling of hardened H13 tool steel", ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50244, June 13-17, 2011, Corvallis, Oregon.

-        Shin, Y.C., Hu, W., King, G., "High Aspect Ratio Microhole Drilling Using Ultrashort Lasers", Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.

-        Shin, Y.C., Cheng, G., Hu, W., Zhang, M.T., Lee, S., "High Precision Scribing of Thin Film Solar Cells by a Picosecond Laser", Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.

-        Shin, Y.C., "Laser-assisted Machining: Its Benefits and Potential", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.

-        Wen, S. and Shin, Y.C., "Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.

-        Hu, W. and Shin, Y.C., "High Precision Scribing of Solar Cell Films by a Picosecond Laser", Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.

-        Fortunato, A., Zhao, X. and Shin, Y.C., "Fabrication of Waveguides and Microfluidic Channels in Fused Silica by a Femtosecond Laser", Proc. of the 5th International Conference on MicroManufacturing, April 5-8, 2010, Madison, Wisconsin.

-        Shelton, J.A. and Shin, Y.C., "Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration", Proc. of the 5th International Conference on MicroManufacturing, April 5-8, 2010, Madison, Wisconsin.

 

Back to Top

Books and Book Chapters

1.     Shin, Y.C. and Dandekar, C., Machining of Metal Matrix Composites, edited by J. Paulo Davim, Chapter 1, Mechanics and Modeling of Chip Formation in Machining of MMC, Springer, 2011, ISBN 978-0-85729-937-6.

2.     Lei, S., Shin, Y.C. and Pfefferkorn, F., Intelligent Energy Field Manufacturing: Interdisciplinary Process Innovations, edited by W. Zhang, Chapter 20, Laser Assisted Machining, CRC Press; 1 edition (July 6, 2010), ISBN-10: 1420071017.

3.     Shin, Y.C. and Xu, C., Intelligent Systems: Modeling, Optimization and Control, CRC Press, Taylor and Francis, 456 pages, Dec. 2008.

4.     Shin, Y.C., Neural Network Systems Techniques and Applications Series, Vol. 4 Industrial and Manufacturing Systems (editor: Cornelius T. Liondes), "Dynamic Non-linear Systems: Theory and Application to Tool Wear Monitoring in Flexible Manufacturing Systems", pp. 345-389, CRC Press Inc., 1998.

5.     Shin, Y.C., The Engineering Handbook, Chapter 166, "Machine Tools and Processes", CRC Press. Inc., pp. 1749-1755, Edited by Richard C. Dorf, 1996.

6.     Shin, Y.C., Handbook of Design, Manufacturing and Automation, chapter 14 "Machine Tools", pp. 243-258, John Wiley & Sons, Inc., co-edited by R. Dorf and A. Kusiak, 1994.

7.     Shin, Y.C., Artificial Neural Networks for Intelligent Manufacturing, chapter 14 "Adaptive Control in Manufacturing", pp. 399-411, Chapman and Hall, ed. by C. Dagli, 1993.

8.     Neural Networks in Manufacturing and Robotics, ASME PED-Vol. 57, editor, co-editor with A. Abdelmonem and S. Kumara, 1992.

9.     Intelligent Engineering Systems through Artificial Neural Networks, Vol. 2, ASME Press, co-editor with C.H. Dagli and L. Burke, 1992.

10.  Intelligent Engineering Systems through Artificial Neural Networks, Vol. 1, ASME Press, co-editor with C.H. Dagli and S.R.T. Kumara, 1991

Back to Top

Patents

1.     Laser-Assisted Machining Process with Distributed Lasers, U.S. Patent No. 8,053,705 B2, Nov. 8, 2011.

2.     Integrated Laser Material Processing Cell, U.S. Patent No. 8,604,381 B1, Dec. 10, 2013.

3.     Laser-Assisted Machining Apparatus with Distributed Lasers, U.S. Patent No. 8,698,041 B2, Apr. 15, 2014.

4.     Machining Apparatus and Process, U.S. Patent No. 8,839,497 B2, Sept. 23, 2014

5.     Laser-Assisted Micro Machining System and Methods, U.S. Patent No. 8,847,114 B1, Sept. 30, 2014

6.     Intelligent Optimization Method and System Therefor, U.S. Patent No. 9,367,060 B2, June 14, 2016.

7.     Integrated Laser Material Processing Cell, U.S. Patent No. 9,381,603 B2, Jul. 5, 2016.

8.     Methods of Forming Holes and Etching Surfaces in Substrates and Substrates Formed Thereby, U.S. Patent 10,052,722, issued on Aug. 21, 2018.

9.     Laser-Assisted Micro Machining System and Methods, U.S. Patent No. 10,549,382 B2, Feb. 4, 2020.

10.  Methods of Making Hydrophobic Contoured Surfaces and Hydrophobic Contoured Surfaces and Devices Made Therefrom, U.S. Patent No. 11,000,975 B2, May 11, 2021.

Back to Top

 

pu

MECHANICAL ENGINEERING
PURDUE UNIVERSITY

Last revised on May 28, 2022 by Webmaster

Copyright © 2001 Dr. Y.C. Shin
Any unauthorized use, copying or mirroring strictly prohibited