Final Defense: Patrick Hearne
Monday, November 30, 2026 at 11:30AM-1:30PM
Event Details
Location
ARMS 3109
Add To Calendar
Event Description
"Additive Manufacturing of Copper and GRCop-42: Processing, Microstructure, and Deformation of Bulk Materials and Microlattices"
Patrick Hearne, MSE PhD Candidate
Advisor(s): Dr. Xinghang Zhang
ABSTRACT
Copper and its alloys are widely used in thermal management, electronics, and aerospace applications because of their high thermal and electrical conductivities. Laser powder bed fusion (LPBF) offers opportunities to manufacture copper components with complex internal passages and microlattice architectures. By selectively melting successive layers of metallic powder, LPBF provides substantial geometrical flexibility, reduces tooling requirements, and enables structures that are difficult to produce through conventional manufacturing. However, copper’s high thermal conductivity and low absorptivity at near-infrared wavelengths make consistent melting and consolidation challenging. Understanding how processing influences density, microstructure, and mechanical behavior is therefore essential for expanding the use of additively manufactured copper-based materials. This thesis begins with the principles of additive manufacturing and the processing challenges associated with copper, followed by investigations of densification, microstructural development, microlattice deformation, and the elevated-temperature behavior of GRCop-42. Together, these studies examine how processing conditions, structural geometry, and operating temperature influence the performance of copper-based materials manufactured by LPBF. First, novel processing strategies were investigated to improve the density of additively manufactured copper. These efforts addressed the difficulty of achieving sufficient melting and interlayer bonding and established conditions for producing highly consolidated components. Subsequent investigations demonstrated the fabrication of high-density copper with nanoscale grains and favorable tensile properties. Microstructural characterization and mechanical testing were used to examine the relationship between consolidation, grain structure, and tensile response., Second, the investigation was extended to microlattice architectures to examine how geometrical design influences deformation. Digital image correlation was used to resolve the spatial distribution and evolution of strain during mechanical loading. This approach enabled the identification of localized deformation and provided insight into how individual structural features contribute to the overall mechanical response.
Finally, the elevated-temperature tensile behavior of LPBF GRCop-42 was examined through in situ testing and post-deformation characterization. Ultimate tensile strength decreased from approximately 486 MPa at room temperature to 155 MPa at 800 °C, accompanied by reduced uniform elongation and changes in crack development. Transmission electron microscopy revealed dislocation interactions with strengthening precipitates and stacking faults within precipitates following high-temperature deformation.