Publication of Prof. Yung C. Shin   (since 1990 at Purdue)

• Shin, Y.C., "System Identification of Multivariate Systems with Feedback", Trans. of the ASME, J. of Dynamic Systems, Measurement, and Control, June 1990, Vol. 112, pp. 283-291.
• Shin, Y.C., K.W. Wang, Chen, C.H., "Dynamic Analysis and Modeling of a High Speed Spindle System", Trans. of North American Manufacturing Research Institution/SME, Vol. 18, May 1990, pp. 298-304.
• Elanayar V.T., S., Shin, Y.C. and Kumara, S., "Machining Condition Monitoring for Automation Using Neural Networks", ASME PED-Vol. 44, Monitoring and Control of Manufacturing Processes, 1990, ASME WAM, pp. 85-100.
• Shin, Y.C., "Static and Dynamic Characteristics of a Two Stage Pilot Relief Valve", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 113 No. 2, June 1991, pp. 280-288.
• Shin, Y.C. and Wang, K.F., "Design of an Optimal Damper to Minimize the Vibration of Machine Tool Structures Subject to Random Excitation",  Journal of Engineering with Computers, Vol. 7, No. 4, 1991, pp. 199-208.
• Shin, Y.C., S.J. Oh, C.O. Ruud, "Machining Condition Monitoring by an X-ray Diffraction Technique", Trans. of the North American Manufacturing Research Institution/SME, Vol. 19, 1991, pp. 136-141.
• Shin, Y.C., Chin, H.C. and Brink, M.J., "Characterization of CNC Machining Centers", J. of Manufacturing Systems, Vol. 10, No. 5, 1991, pp. 407-421.
• Wang, K.F., Shin, Y.C. and Chen, C.H., "On the Natural Frequencies of High-Speed Spindles with Angular Contact Bearings", Proc. of Inst. of Mechanical Engineers, Part C: J. of Mechanical Engineering Science, Vol. 205, Issue C3, 1991, pp. 147-154.
• Shin, Y.C., S.J. Oh, C.O. Ruud, "Investigation of Residual Stresses of Machined Surface by an X-ray Diffraction Technique", Nondestructive Characterization of Materials IV , pp. 409-418, 1991.
• Y.T. Chen and Y.C. Shin, "A Surface Grinding Advisory System with Fuzzy Logic", ASME DSC-Vol. 28, Control of Manufacturing Processes, pp. 67-77, 1991, ASME WAM.
• Elanayar V.T., S. and Shin, Y.C., "Tool Wear Estimation in Turning Operations Based on Radial Basis Functions", Proc. of the First Artificial Neural Network in Engineering (ANNIE) Conference, pp. 685-692, ASME Press, 1991.
• Intelligent Engineering Systems through Artificial Neural Networks, Vol. 1, ASME Press, co-editor with C.H. Dagli and S.R.T. Kumara, 1991.
• Shin, Y.C. "Bearing Non-linearity and Stability Analysis in High Speed Machining", Trans. of the ASME, Journal of Engineering for Industry, Vol. 114, No.1, 1992, pp. 23-30.
• Shin, Y.C., Chen, Y.T. and Kumara, S., "Framework of an Intelligent Grinding Process Optimizer", Journal of Intelligent Manufacturing, Vol. 3, 1992, pp. 135-148.
• Shin, Y.C. and Wei, Y., "A Statistical Analysis of Positional Accuracy for Multi Axis Machine Tools", Precision Engineering, Vol. 14, No.3 1992, pp. 139-146.
• Shin, Y.C. and Joo, Y.S., "Optimization of Machining Conditions with Practical Constraints", International Journal of Production Research, Vol. 30, No. 12, pp. 2907-2919, 1992.
• Elanayar V.T., S. and Shin, Y.C., "Flank and Crater Wear Estimation with Radial Basis Function Neural Networks", PED-Vol. 57, Neural Networks in Manufacturing and Robotics, pp. 37-51, Nov. 8-13, 1992, ASME Winter Annual Meeting, Anaheim, CA.
• Elanayar, S. and Shin, Y.C., "Approximation Capabilities of Radial Basis Function Neural Networks", Proc. of the Second Artificial Neural Network in Engineering (ANNIE) Conference, pp 291-298, 1992.
• Intelligent Engineering Systems through Artificial Neural Networks, Vol 2, ASME Press, co-editors, C.H. Dagli, Y.C. Shin and L. Burke,1992.
• Neural Networks in Manufacturing and Robotics, ASME PED-Vol. 57, co-editors, Y.C. Shin, A. Abdelmonem and S. Kumara, 1992.
• Shin, Y.C. and Betts, C.A., "Control of Chips in the Turning of 4150 Steel by Using an Obstruction Type Chip Breaker", Trans. of ASME, Journal of Engineering for Industry, Vol. 115, No.1, pp. 160-163, 1993.
• Deshpande, M.N., Shin, Y.C., and Nwokah, O., "Robust Control of High Speed Machining Processes", Proc. of African-USA International Manufacturing Conference, Nigeria, January 1993.
• Barthel, J. and Shin, Y.C., "Adaptive Control of Nonminimum Phase End Milling Processes", Proc. of the 1993 American Control Conference, San Francisco, pp. 2449-2454, 1993.
• Shin, Y.C. and Waters, A.J., "Process Design through Machining Process Simulation for Face Milling", Seminars and Applications on A Systems Approach to Machining, May 4-5. 1993, Cincinnati, Ohio, pp. 158-164.
• Chen, C.H., Wang, K.W. and Shin, Y.C., "An Integrated Approach toward the Modeling and Dynamic Analysis of High Speed Spindles", Proc. of the 14th Vibration and Noise Conference, ASME, DE-60, pp. 339-346, Sept. 1993, Albuquerque, New Mexico.
• Oh, S.J., Shin, Y.C. and Furgason, E.S., "Surface Roughness Evaluation via Ultrasonic Scanning", IEEE Symposium on Ultrasonics, Ferroelectrics and Frequency Control, Baltimore, MD, Nov. 1993.
• Shin, Y.C. and Oh, S.J., "Surface Roughness Measurement by Ultrasonic Sensing for In-process Monitoring", ASME DSC-Vol. 50, Symp. on Computer Control Machines for Manufacturing, Dec. 1993, pp. 3-12, New Orleans, LA.
• Hayes, R., Shin, Y.C. and Nwokah, O., "A Robust Force Control for Milling Processes", ASME 1993 WAM, Symp. on Mechantronics, Dec. 1993, pp. 119-125, New Orleans, LA.
• Shin, Y.C., Artificial Neural Networks for Intelligent Manufacturing, chapter 11 "Adaptive Control in Manufacturing", pp. 399-411, Chapman and Hall, ed. by C. Dagli, 1993.
• Elanayar, S. and Shin, Y.C., "Radial Basis Function Neural Network for Approximation and Estimation of Nonlinear Stochastic Dynamic Systems", IEEE Trans. on Neural Networks, Vol. 5, No. 4, pp. 594-603, July 1994.
• Chen, C.H., Wang, K.W. and Shin, Y.C., "An Integrated Approach toward the Modeling and Dynamic Analysis of High Speed Spindles - Part I", Trans. of the ASME, J. of Vibration and Acoustics, Vol. 116, pp. 506-513, October, 1994.
• Shin, Y.C. and Waters, A.J., "Face Milling Process Modeling with Bearing Nonlinearity", Trans. of North American Manufacturing Research Institution, Vol. 22, pp. 157-163, May 1994.
• Shin, Y.C., Handbook of Manufacturing and Automation, chapter 14 "Machine Tools", pp. 243-258, John Wiley & Sons, Inc., co-edited by R. Dorf and A. Kusiak, 1994.
• Oh, S.J., Shin, Y.C. and Furgason, E.S., "Surface Roughness Evaluation via Ultrasonic Scanning", IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency Control, Vol. 41, No. 6, pp. 1-9, Nov. 1994.
• Hayes, R., Shin, Y.C. and Nwokah, O., "Robust Control System for High Speed Motion Drives", Proc. of S..M. Wu Manufacturing Symposium, Vol. 1, pp. 369-377, May 1994, Evanston, IL.
• Rober, S. and Shin, Y.C., "Modeling and Control of CNC Machines Using a PC-Based Open Architecture Controller", Proc. of Japan-USA Symposium on Flexible Automation, pp. 1467-1470, July 10-13, 1994, Kobe, Japan.
• Elanayar, S.V.T. and Shin, Y.C., "Modeling of Tool Forces for Worn Tools: - Flank Wear Effects", Materials Issues in Machining II and The Physics of Machining Processes II, TMS & ASME, pp. 341-361, Symposium on "Mechanics of Machining", ASME WAM, 1994.
• Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness using Ultrasonic Sensing", Manufacturing Science and Engineering, ASME PED-Vol. 68-1, pp. 145-154, Symposium on "Measurement and Inspection of Products and Processes", ASME WAM, 1994.
• Novak, J.W., Shin, Y.C., and Incropera, F.P., "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718", Manufacturing Science and Engineering, ASME PED-Vol. 68-1, pp. 443-451, symposium on "Nontraditional Manufacturing Processes in the 1990s", 1994.
• Rober, S., Shin, Y.C. and Nwokah, O.D.I., "A Robust Controller for Cutting Force Control in the End Milling Process", Dynamic Systems and Control, ASME DSC-Vol. 55-2, pp. 977-986, Symp. on "Mechatronics for Manufacturing", 1994.
• Rober, S. and Shin, Y.C., "Adaptive Control of Cutting Force for Endmilling Processes using a Modified MRAC Scheme", Manufacturing Science and Engineering, ASME PED-Vol. 68-2, pp. 725-735, Symp. on "Intelligent Machine Tool Systems, Modelling, Control and Compensation Issues", ASME WAM, 1994.
• Shin, Y.C. and Vishnupad, P., "Neuro-Fuzzy Control of Complex Manufacturing Processes", Proc. of the First World Congress on Intelligent Manufacturing Processes and Systems, Feb. 13-17, 1995, Mayaguez, Puerto Rico.
• Coker, S.A. and Shin, Y.C., "In-process Control of Surface Roughness with Wear Using a New Ultrasonic System", Proc. of the American Control Conference, pp. 1717-1721, Seattle, Washington, June 21-23, 1995.
• Elanayar V.T., S. and Shin, Y.C., "State Estimation of Continuous Time Radial Basis Function Networks", Proc. of American Control Conference, pp. 3775-3779, Seattle, Washington, June 21-23, 1995.
• Rober, S. and Shin, Y.C., "Modeling and Control of CNC Machines Using a PC-Based Open Architecture Controller", Mechatronics, Vol. 5, No. 4, pp. 401-420, 1995.
• Nguyen, T., Furgason, E.S. and Shin, Y.C., "Feasibility Assessment of Residual Stress Measurement by an Ultrasonic Technique", Trans. of North American Manufacturing Research Institution, pp. 287-292, May, 1995.
• Elanayar V.T., S. and Shin, Y.C., "Design and Implementation of Robust Tool Wear Monitoring by Radial Basis Function Neural Networks", Proc. of American Control Conference, pp. 1722-1726, Seattle, Washington, June 21-23, 1995.
• Shin, Y.C., Oh, S.J., and Coker, S.A., "Surface Roughness Measurement by Ultrasonic Sensing for In-process Monitoring", Trans. of the ASME, J. of Engineering for Industry, Vol. 117, pp. 439-447, August 1995.
• Vishnupad, P., Shin, Y.C. and Shih A., "Monitoring of Internal Plunge Grinding Processes", Proc. of the 1st International Machining & Grinding Conference, pp. 351-371, MR95-179, Dearborn, Michigan, Sept. 12-14, 1995.
• Shin, Y.C., The Engineering Handbook, Chapter 166, "Machine Tools and Processes", A CRC Press. Inc., pp. 1749-1755, Edited by Richard C. Dorf, 1995.
• Leshock, C. and Shin, Y.C., "Study on the Tool-Chip Interface Temperature in Turning by a Tool-Work Thermocouple Technique", Proc. of Manufacturing Science and Engineering, Vol. 1, pp. 189-201, Symposium on Material Removal and Surface Modification Issues in Machining Processes, ASME IMECE, San Francisco, Nov. 12-17, 1995.
• Jorgensen, B.R. and Shin, Y.C., "Robust Modeling of High Speed Spindle Dynamics", Proc. of Manufacturing Science and Engineering, Vol. 1, pp. 643-656, Symposium on Computer Aided Tooling ASME IMECE, San Francisco, Nov. 12-17, 1995.
• Rozzi, J.C., Krane, M.J.M., Incropera, F.P. and Shin, Y.C., "Numerical Prediction of Three-Dimensional Unsteady Temperatures in a Rotating Cylindrical Workpiece Subjected to Localized Heating by a Translating Laser Source", e Proc. of Transport Phenomena in Manufacturing and Material Processing, HTD Vol. 317-2, pp. 399-411, ASME IMECE, San Francisco, Nov. 12-17, 1995.
• Elanayar, S.V.T. and Shin, Y.C., "Robust Tool Wear Monitoring using Radial Basis Function Neural Network", Trans. of the ASME, J. of Dynamic Systems, Measurement and Control, Vol. 117, pp. 459-467, December, 1995.
• Rober, S. and Shin, Y.C., "Adaptive Control of Cutting Force for Endmilling Processes using a Modified MRAC Scheme", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 339-347, August, 1996.
• Elanayar, S.V.T. and Shin, Y.C., "Modeling of Tool Forces for Worn Tools: Flank Wear Effects", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 359-366, August, 1996.
• Coker, S.A. and Shin, Y.C., "In-process Control of Surface Roughness Due to Wear Using a New Ultrasonic System", International J. of Machine Tools and Manufacture, Vol. 36, No. 3, pp. 411-422, March, 1996.
• Shin, Y. and Vishnupad, P., "Neuro-fuzzy Control of Complex Manufacturing Processes", International J. of Production Research, Vol. 34, No. 12, pp. 3291-3309, 1996.
• Oh, S.J., Shin, Y.C. and Furgason, E.S., "Measurement and Characterization of Milled Surface Profiles with Ultrasonic Waves", Measurement, J. of the International Measurement Confederation, Vol. 17, No. 1, pp. 59-72, 1996.
• Pettengill, J. and Shin, Y.C., "Contour Measurement by an Ultrasonic Technique", the Proceeding of Japan-USA Symposium on Flexible Manufacturing, Boston, MA, 1996.
• Leshock, C.E., Shin, Y.C. and Incropera, F.P., "Modeling of Workpiece Temperature with Plasma Heating", Proceeding of the second S.M. Wu Symposium on Manufacturing Science, pp. 178-186, Ann Arbor, Michigan, 1996.
• Vishnupad, P.S. and Shin, Y.C., "Adaptive Tuning of Membership Functions for Non-linear Optimization Using Gradient Descent Method", Proceeding of the Eleventh International Conference on Systems Engineering, pp. 799-804, UNLV, Las Vegas, Nevada, July 9-11, 1996.
• Rober, S.J. and Shin, Y.C., "A Multivariate Adaptive Control Scheme to Reduce Contour Error in Multi-Axis Positioning Systems- Part I: Design and Stability", Proc. of the Dynamic Systems and Control Division, pp. 371-378, the Symposium on Precision Machine Control and Metrology, ASME IMECE, Nov. 1996, Atlanta, GA.
• Rober, S.J. and Shin, Y.C., "A Multivariate Adaptive Control Scheme to Reduce Contour Error in Multi-Axis Positioning Systems- Part II: Implementation and Experiments", Proc. of the Dynamic Systems and Control Division , pp. 379-386, Symposium on Precision Machine Control and Metrology, ASME IMECE, Nov. 1996, Atlanta, GA.
• Shin, Y.C. and Kim, J.N., "Plasma Enhanced Machining of Inconel 718", Proc. of the Manufacturing Science and Engineering, Symposium on Advanced Machining and Finishing Processes of Ceramics, Composites and High Temperature Alloys, pp. 243-249, ASME IMECE, Nov. 1996, Atlanta, GA.
• Jorgensen, B.R. and Shin, Y.C., "Dynamics of Machine Tool Spindle/Bearing Systems under Thermal Growth", Proc. of the Dynamic Systems and Control Division,, pp. 333-340, the Symposium on Precision Machine Control and Metrology, ASME IMECE, Nov. 1996, Atlanta, GA.
• Jensen, S.A., Shin, Y.C. and Davies, P., "Inverse Filtering of Unwanted System Dynamics in Cutting Force Measurement", Proc. of the Dynamic Systems and Control Division,, pp. 167-174, ASME IMECE, Nov. 1996, Atlanta, GA.
• Novak, J.W., Shin, Y.C., and Incropera, F.P., "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718", Transactions of the ASME, Journal of Manufacturing Science and Engineering, Vol. 119, Vol. 1, pp. 125-129, Feb. 1997.
• Shin, Y.C., Jensen, S.A. and Jorgensen, B.R., "Dynamic Behavior Structural Components in Machining Systems Under Operating Conditions", Transactions of North American Manufacturing Research Institution of SME, Vol. 25, pp. 207-212, May 1997.
• Ehmann, K.F., DeVor, R., DeMeter, E., Dornfeld, D., Kapoor, S., Ni, J., Rajurkar, K., Shin, Y. and Sutherland, J.,"A Framework for a Virtual Machine Tool (VMT)", Technical Papers of the 25th North American Manufacturing Research Institution of SME, pp. 143-148, May 20-23, 1997, Lincoln, Nebraska.
• Rober, S., Shin, Y.C. and Nwokah, O.D.I., "A Robust Controller for Cutting Force Control in the End Milling Process", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 119, No.2, pp. 146-152, June 1997.
• Shin, Y.C. and Waters, A.J., "An Improved Method to Determine Cutting Force Coefficients for Mechanistic Modeling of Machining Processes", International Journal of Machine Tools and Manufacture Vol. 37, No. 9, pp. 1337-1351, August 1997.
• Jorgensen, B.R. and Shin, Y.C., "Dynamics of Machine Tool Spindle/Bearing Sy stems under Thermal Growth", Trans. of the ASME, Journal of Tribology, Vol . 119, No. 4, pp. 875-882, October 1997.
• Leshock, C.E. and Shin, Y.C., "Study on the Tool Temperature in Turning by a Tool-Work Thermocouple Technique", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 119, No. 4, pp. 502-508, November 1997.
• Jensen, S.A. and Shin, Y.C., "Stability Analysis in Facemilling Operation: Part 1 - Theory for Stability Lobe Prediction", Proc. of the ASME Manufacturing Science and Engineering, ASME IMECE, MED-Vol. 6-2, pp. 403-410, November, 1997, Dallas, Texas.
• Jensen, S.A. and Shin, Y.C., "Stability Analysis in Facemilling Operation: Part 2 - Experimental Validation and Influencing Factors", Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 6-2, pp. 411-418, ASME IMECE, November, 1997, Dallas, Texas.
• Rowell, T and Shin, Y.C., "Analysis of Tapered Roller Bearing Stiffness", Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 6-2, pp. 349-357, ASME IMECE, November, 1997, Dallas, Texas.
• Lei, S., Shin, Y.C. and Incropera, F.P., "Constitutive Modeling of Material Deformation Under High Strain Rates and Temperatures through Orthogonal Machining Tests", Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 6-2, pp. 91-98, ASME IMECE, November, 1997, Dallas, Texas.
• Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Ceramic Materials", Proc. of the ASME Heat Transfer Division, HTD-Vol. 351, pp. 75-85, ASME IMECE, November, 1997, Dallas, Texas.
• Pfefferkorn, F., Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement in Laser Assisted Machining Processes", Experimental Heat Transfer, Vol 10., pp. 291-313, 1997.
• Shin, Y.C., Neural Network Systems Techniques and Applications Series, Vol. 4 Industrial and Manufacturing Systems (ed. by Cornelius T. Liondes), "Dynamic Non-linear Systems: Theory and Application to Tool Wear Monitoring in Flexible Manufacturing Systems", pp. 345-389, CRC Press Inc., 1998.
• Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness Utilizing Ultrasound", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 1, pp. 197-200, February 1998.
• Jorgensen, B.R. and Shin, Y.C., "Robust Modeling of High Speed Spindle Dynamics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, pp. 387-394, May 1998.
• Shin, Y.C., Jorgensen, B.R. and Jensen, S.A. "Modeling of Machine Tool Dynamics and Chatter Prediction", Proc. of the 1998 SAE Aerospace Manufacturing Technology Conference, pp. 31-36, SAE Technical Paper 981840, June 2-4, 1998, Long Beach, CA.
• Shin, Y.C., Coker, S.A., Oh, S.J. and Hu, S. "In-process Monitoring and Control of Surface Roughness", Proc. of the 1998 SAE Aerospace Manufacturing Technology Conference, pp. 83-86, SAE Technical Paper 981850, June 2-4, 1998, Long Beach, CA.
• Shin, Y.C., "Modeling of Machine Tool Dynamics and Prediction of Their Effects on Machining Processes", Proc. of the CIRP International Workshop on Modeling of Machining Operations, pp.  121-130, Atlanta, GA.  May 19, 1998.
• Linde, E.K. and Shin, Y.C., "Issues on the Discrete Implementation of Frequency Domain Controller Design", Proc.  of American Control Conference, pp. 3502-3503, June 24-26,  1998, Philadelphia, Pennsylvania  .
• Shin, Y.C. and Waters, A.J., "Framework for a Machining Advisory System with Application to Facemilling Operation", Journal of Intelligent Manufacturing, Vol. 9, No.3, pp.  225-234, June 1998.
• Lee, C.W. and Shin, Y.C., "Fuzzy Basis Function Networks of Hierarchical Structure for Modeling Manufacturing Processes", Proc. of the ASME Dynamic Systems and Control Division, pp. , Symposium on Precision Machine Control and Metrology, ASME IMECE, Nov. 1998, Anaheim, GA.
• Hu, S. and Shin, Y.C., "Simultaneous In-Process Roughness Control and Tool Wear Monitoring via a Distributed Open Architecture Controller", Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 8, pp. 531-537, Symposium on Sensor Based Control for Manufacturing, ASME IMECE, Nov. 1998, Anaheim, GA.
• Rozzi, J.C., Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics", Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 8, pp. 229-239,  ASME IMECE, Nov. 1998, Anaheim, GA.
• Rozzi, J.C., Pfefferkorn, F.  E., Incropera, F.P. and Shin, Y.C., "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to Translating Laser Heat Source: Part I-Comparison of Surface Temperature Measurements with Theoretical Results", Trans. of the ASME, Journal of Heat Transfer, Vol. 120, No. 4, pp. 899-906, November 1998.
• Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to Translating Laser Heat Source: Part II-Parametric Effects and Assessment of a Simplified Model", Trans. of the ASME, Journal of Heat Transfer, Vol. 120, No. 4, pp. 907-915, November 1998.
• Vishnupad, P.S. and Shin, Y.C., "Intelligent Optimization of Grinding Processes using Fuzzy Logic", Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 212, pp. 647-660, 1998.
•  Lei, S., Shin, Y.C. and Incropera, F.P., "Thermo-Mechanical Modeling of Orthogonal Machining Processes by Finite Element Analysis", International Journal of Machine Tools and Manufacture, Vol. 39, Issue 5, pp. 731-750, February 1999.
• Vishnupad, P.S. and Shin, Y.C., "Adaptive Tuning of Membership Functions for Non-linear Optimization Using Gradient Descent Method", Journal of Intelligent and Fuzzy Systems, Volume 7, Issue 1, pp. 13-25, March 1999.
• Shamine, D.M. and Shin, Y.C., “Effects of Axial and Radial Loading on No.  50 Taper Joint Stiffness”, Transactions of North American Manufacturing Research Institution of SME, Vol. 27, pp. 111-116, May 1999.
• Shin, Y.C., Hu, S. and Choi, T.J., "Distributed Open Architecture Controller for Machine Tools", SAE Technical Paper, 1999-0102278, Aerospace Manufacturing Technology Conference, Bellevue, Washington, June 8-10, 1999.
• Hong, S.W, Shamine, D.M. and Shin, Y.C., “An In-Situ Identification Method for Joint Parameters in Mechanical Structures”, Trans. of the ASME, Journal of Vibration and Acoustics, Vol. 121, No. 3, pp. 363-372, July 1999.
• Rao, B. and Shin, Y.C., “A Comprehensive Dynamic Cutting Force Model for Chatter Prediction in Turning”, International Journal of Machine Tools and Manufacture, Vol. 39, Issue 10, pp. 1631-1654, 1999.
• Shin, Y.C., Lee, C.W., Choi, T.J. and Hu, S., “Intelligent Control via Open Architecture Controller”, Proc. of the 3rd International Machining and Grinding Conference, pp. 257-272, Oct. 4-7, 1999.
• Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., “Laser Assisted Machining: Its Potential and Future”, Proc. of the 3rd International Machining and Grinding Conference, pp. 575-586, Oct. 4-7, 1999.
• Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 1 - Theory for Stability Lobe Prediction”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 600-605, November, 1999.
• Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 2 - Experimental Validation and Influencing Factors”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 606-614, November, 1999.
• Lei, S., Shin, Y.C. and Incropera, F.P., “Constitutive Modeling of Material Deformation Under High Strain Rates and Temperatures through Orthogonal Machining Tests”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 21, No. 4, pp. 577-585, November, 1999.
• Lei, S., Shin, Y.C. and Incropera, F.P., “Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics”, Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 10, pp., 781-788, ASME IMECE, Nov. 1999, Nashville, TN.
• Lee, C.W. and Shin, Y.C., “Improved Generalized Grinding Advisory System”, Proc. of the ASME Manufacturing Science and Engineering, MED-Vol. 10, pp. 473-480, ASME IMECE, Nov. 1999, Nashville, TN.
• Pfefferkorn, F.E., Incropera, F.P., and Shin, Y.C., “Transient, Three-dimensional Heat Transfer Model for Partially Stabilized Zirconia Undergoing Laser-Assisted Machining”, Proc. of the ASME Heat Transfer, ASME IMECE, Nov. 1999, Nashville, TN.
• Elanayar V.T., S. and Shin, Y.C., "State Estimation of Continuous Time Radial Basis Function Networks", Automatica, Vol. 36/3, pp. 399-407, 2000.
• Shamine, D.M., Hong, S.W. and Shin, Y.C., "An In-situ Modal Based Method for Structural Dynamic Joint Parameter Identification", Proc. of the Institution of Mechanical Engineers, Part C. Journal of Mechanical Engineering Science, Vol. 214 Part C, pp. 1-13, 2000.
• Rozzi, J.C., Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of a Silicon Nitride Ceramic: Part I- Comparison with Measured Surface Temperature Histories", International J. of Heat and Mass Transfer, 43, pp. 1409-1424, 2000.
• Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of a Silicon Nitride Ceramic: Part II - Assessment of Parametric Effects", International J. of Heat and Mass Transfer, 43, pp. 1425-1437, 2000.
• Shamine, D.M., Hong, S.W. and Shin, Y.C., "Experimental Identification of Dynamic Parameters of Rolling Element Bearings in Machine Tools", Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 122, pp. 95-101, March 2000.
• Rozzi, J.C., Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 122, pp. 666-670, Nov. 2000.
• Lee, C.W. and Shin, Y.C., "Evolutionary Modeling and Optimization of Grinding Processes" International Journal of Production Research, 2000, Vol. 38, No. 12, pp. 2787-2813, 2000.
• Lei, S., Shin, Y.C. and Incropera, F.P., "Deformation Mechanisms and Constitutive Modeling for Silicon Nitride Undergoing Laser Assisted Machining", International Journal of Machine Tools and Manufacture, Vol. 40, No. 15, pp. 2213-2233, 2000.
• Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., "Thermally (Laser and Plasma) Assisted Machining: Its Potential and Future", Abrasives Magazine, April/May, pp. 16-30, 2000.
• Shamine, D.M. and Shin, Y.C., "Effects of Axial and Radial Loading on No. 50 Taper Joint Stiffness", Journal of Manufacturing Processes, SME, Vol. 2, No. 3, Sept. 2000.
• Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., "Laser Assisted Machining: Its Potential and Future", Machining Technology, featured article, Vol. 11, No. 3, pp. 1-7, Third quarter, 2000.
• Shin, Y.C., Lee, C.W., Choi, T.J., Hu, S., "Intelligent Control via Open Architecture Controller", Abrasives Magazine, October/November, pp. 26-35, 2000.
• Leshock, C.E., Kim, J. N., and Shin, Y.C., "Plasma enhanced machining of Inconel 718: modeling of workpiece temperature with plasma heating and experimental results", International Journal of Machine Tools and Manufacture, 41/6, pp. 877-891, March 2001.
• Clancy, B.E., Rao, B. and Shin, Y.C., “Mechanistic Force Modeling With Time-Dependent Characteristics Due To Tool Wear For Face Turning of Ni-Based Super Alloys", Transactions North American Manufacturing Research Institution, Vol. 29, pp. 311-318, May 2001.
• Rao, B. and Shin, Y.C., “High Speed Machining of 7075-T6 Aluminum Using Carbide and Diamond Tools, International Journal of Machine Tools and Manufacture. Vol. 41/12, pp. 1763-1781, June 2001.
• Lei, S., Shin, Y.C. and Incropera, F.P., “Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 123, pp. 639-646, November 2001.
• Lee, C.W. and Shin, Y.C., “Construction of Fuzzy Systems Using Least-Squares Method and Genetic Algorithm”, Proc. of the 9th IFSA Workd Congress and 20th North American Fuzzy Information Processing Society (NAFIPS) International Conference, CD volume, ISBN: 0-7803-7079-1, pp. 2630-2635, July 25-July 28, 2001, Vancouver, British Columbia, Canada.
• Lee, C.W. and Shin, Y.C., “Intelligent Modeling and Control of Computer Hard Disk Grinding Processes", Proc. of the 3rd International Conference on Intelligent Processing and Manufacturing of Materials, July 29-Aug. 2, 2001, Vancouver, British Columbia, Canada.
• Hong, S.W. and Shin, Y.C., “Dynamic Analysis of Rotor Systems with Angular Contact Ball Bearings Subject to Axial and Radial Loads”, The First International Symposium on Stability Control of Rotating Machinery, CD volume, paper #4009, South Lake Tahoe, Aug. 20-24, 2001.
• Lee, C.W., Choi, T.J. and Shin, Y.C., “Intelligent Modeling of Complex Manufacturing Processes Using Hierarchical Fuzzy Basis Function Networks”, ASME IMECE, DSC24590, CD Vol. 2, Nov. 2001, New York, NY.
• Rebro, P., Shin, Y.C. and Incropera, F.P., “Laser Assisted Machining of Reaction Sintered Mullite Ceramics”, ASME IMECE, MED-23341, CD volume 3, Nov. 2001, New York, NY.
• Rebro, P.A., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., "Comparative Assessment of Laser-assisted Machining for Various Ceramics", Transactions of North American Manufacturing Research Institution, Vol. 30, pp. 153-160, May 2002.
• Clancy, B.E., Rao, B. and Shin, Y.C., "Time Domain Chatter Prediction Including Tool Wear Effects During Face Turning of Nickel-based Super Alloys", Transactions of North American Manufacturing Research Institution, Vol. 30, pp. 377-384, May 2002.
• Zhang, C. and Shin, Y.C., "A Novel Laser-assisted Truing and Dressing Technique for Vitrified CBN Wheels", International Journal of Machine Tools and Manufacture, Vol. 42, Issue 7, pp. 825-835, 2002.
• Clancy, B.E. and Shin, Y.C., “A Comprehensive Chatter Prediction Model for Face Turning Operation Including the Tool Wear Effect”, International Journal of Machine Tools and Manufacture, Vol. 42, Issue 9, pp. 1035-1044, 2002.
• Rebro, P., Shin, Y.C. and Incropera, F.P., “Laser Assisted Machining of Reaction Sintered Mullite Ceramics”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 124,pp. 875-885, Nov. 2002.
• Rao, B. and Shin, Y.C., "Analysis of Three-dimensional Machining Using an Extended Oblique Machining Theory”, Journal of Machining Science and Technology, Vol. 6, No. 2, pp. 187-213, 2002.
• Hong, S.W., Kang, J.O. and Shin, Y.C., “Dynamic Characteristics of Indeterminate Rotor Systems with Angular Contact Bearings Subject to Axial and Radial Loads”, International Journal of the Korean Society of Precision Engineering, Vol. 3, No. 2, pp. 61-71, April 2002.
• Shin, Y.C., Li, Hongqi, Brath, R., Grimes, D. and Pound T., “Critical Technology Development for High Speed Spindles”, NSF Grantees Conference, CD proceeding, pp. 1239-1248, Jan. 7-10, 2002, San Juan, Puerto Rico.
• Bowman K.J., F.E. Pfefferkorn, and Y.C. Shin, "Recrystallization Textures during Laser-Assisted Machining of Zirconia Ceramics," Materials Science Forum, Vols. 408-412, pp. 1669-1674, Trans Tech Publications, Switzerland, 2002.
•  Rao, B. and Shin, Y.C., “An Experimental Study on High Speed Machining of TiAl6V4 Alloy”, ASME IMECE, IMECE-39098, CD volume 3, Nov. 2002, New Orleans, LA.
• Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., “Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry”, ASME IMECE, IMECE2002-39543, CD Volume 1, Nov. 2002, New Orleans, LA, pp. 1-10.
• Zhang, C. and Shin, Y.C., “Wear of diamond dresser in laser assisted truing and dressing of vitrified CBN wheels”, International Journal of Machine Tools and Manufacture, Vol. 43, Issue 1, Pages 41-49, 2003.
• Choi, T.J. and Shin, Y.C., “On-line Chatter Detection Using Wavelet-Based Parameter Estimation", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 125, pp. 21-28, February 2003.
• Lee, C.W., Choi, T.J., Shin, Y.C., “Intelligent Model-based Optimization of the Surface Grinding Process for Heat-Treated 4140 Steel Alloys with Aluminum Oxide Grinding Wheels,” Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 125, pp. 65-76, February 2003.
• Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., “Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry”, Trans. of the ASME, Journal of Heat Transfer, Vol. 125, No. 1, pp. 48-56, Feb. 2003.
• Lee, C.W. and Shin, Y.C., “Construction of Fuzzy Systems Using Least-Squares Method and Genetic Algorithm”, Fuzzy Sets and Systems, Vol. 137, pp. 297-323, 2003.
• Wang, Z.Y., Rajurkar, K.P., Fan, J., Lei, S., Shin, Y.C. and Petrescu, G., “Hybrid Machining of Inconel 718, International Journal of Machine Tools and Manufacture, Vol. 43, Issue 13, pp. 1287-1396, October 2003.
• Shin, Y.C., “Critical Technologies for High Speed Spindles”, NSF Grantees Conference, CD proceeding, Jan. 6-9, 2003, Birmingham, Alabama.
• Shin, Y.C., “Laser-assisted Machining of Ceramics with Complex Features”, NSF Grantees Conference, CD proceeding, Jan. 6-9, 2003, Birmingham, Alabama.
• Shin, Y.C. and Tian, Y., “Laser-assisted Dressing of Vitrified CBN Grinding Wheels”, Proc. of the International Grinding Conference, April 4-9, 2003, Itasca, Illinois, SME Technical Paper MR03-260.
• Shin, Y.C., Lee, C.W. and Choi, T., “Intelligent Grinding Advisory System”, Proc. of the International Grinding Conference, April 4-9, 2003, Itasca, Illinois.
• Pfefferkorn, F.E., Shin, Y.C., Incropera, F.P. and Tian, Y., “Laser-Assisted Machining of Partially Stabilized Zirconia”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 42-51, Feb. 2004.
• Rebro, P.A., Shin, Y.C. and Incropera, F.P., "Design of Operating Conditions for Crackfree Laser-assisted Machining of Mullite”, International Journal of Machine Tools and Manufacture, Vol. 44, pp. 677-694, 2004.
• Li, H. and Shin, Y.C., "Integrated Thermo-dynamic Modeling of High Speed Spindles: Part 1- Model Development", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 148-158, Feb. 2004.
• Li, H. and Shin, Y.C., "Integrated Thermo-dynamic Modeling of High Speed Spindles: Part 2- Solution Procedure and Validations", Trans. of the ASME, Journal of Manufacturing Science and Engineering,, Vol. 126, No. 1, pp. 159-168, Feb. 2004.
• Li, H. and Shin, Y.C., "Analysis of Bearing Configuration Effects on High Speed Spindles Using an Integrated Dynamic Thermo-mechanical Spindle Model”, International Journal of Machine Tools and Manufacture, Vol. 44, pp. 347-364, 2004.
• Tian, Y. and Shin, Y.C., “Finite Element Modeling of Machining of 1020 Steel Including the Effects of Round Cutting Edge” Transactions of North American Manufacturing Research Institution, Vol. 32, pp. 111-118, June 2004.
• Lee, C.W. and Shin, Y.C., “Modeling of Complex Manufacturing Processes by Fuzzy Basis Function Networks With Application to Grinding Processes”, Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 126, pp. 880-890, Dec. 2004.
• Tian, Y. and Shin, Y.C., “Laser-assisted Machining of Ceramics with Complex Features”, Proc. of the NSF Grantees Conference, CD, Jan. 8-10, 2004, Dallas, Texas.
• Shin, Y.C., Li, H. and Rao, B. “High Speed Machining of Aluminum 7075-T6”, SME Technical paper, TP04PUB212, High Speed Machining Conference, April 28-29, 2004, Chicago, Illinois.
• Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., “Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining”, International Journal of Heat and Mass Transfer, Volume 48, Issue 10, pp. 1999-2012, May 2005.
• Xu, C. and Shin, Y.C., " Design of a Multi-level Fuzzy Controller for Nonlinear Systems and Stability Analysis”, IEEE Trans. on Fuzzy Systems, Vol. 13, No. 6, pp. 761-778, Dec. 2005.
• Wu, B. and Shin, Y.C., “A Self-closed Thermal Model for Laser Shock Peening under the Water Confinement Regime Configuration and Comparisons to Experiments”, Journal of Applied Physics, Vol. 97, Issue 11, pp. 113517-1-11, 2005.
• Li, H. and Shin, Y.C., “A Comprehensive Dynamic End Milling Simulation Model”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 86-95, Feb. 2006.
• Li, H. and Shin, Y.C., “Predictive Chatter Model of Cylindrical Grinding Processes”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 404-415, May 2006.
• Wu, B. and Shin, Y.C., “Laser Pulse Transmission through the Water Breakdown Plasma in Laser Shock Peening”, Applied Physics Letters, 88, 041116, 2006.  Also published, in February 2006 issue of Virtual Journal of Ultrafast Science, American Physical Society and the American Institute of Physics, at http://www.vjultrafast.org.
• Skvarenina, S. and Shin, Y.C., "Laser-assisted machining of Compacted Graphite Iron with Microstructural Analysis”, International Journal of Machine Tools and Manufacture, Vol. 46, 7-17, 2006.
• Li, H. and Shin, Y.C., “Wheel Regenerative Chatter of Surface Grinding”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 393-403, May 2006.
• Wu, B. and Shin, Y.C., “Modeling of Nanosecond Laser Ablation with Vapor Plasma Formation”, Journal of Applied Physics, 99, 084310, 2006.
• Tian, Y. and Shin, Y.C., " Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features”, Trans. of the ASME. Journal of Manufacturing Science and Engineering, Vol. 128, pp. 425-434, May 2006.
• Anderson, M., Patwa, R. and Shin, Y.C., "Laser-assisted Machining of Inconel 718 with an Economic Analysis”, International Journal of Machine Tools and Manufacture, 46, pp. 1879–1891, Nov. 2006.
• Wu, B., and Shin, Y.C., "Absorption Coefficient of Aluminum near the Critical Temperature and the Consequences on High Power Nanosecond Laser Ablation”, Applied Physics Letters, 89, 111902, 2006.
• Tian, Y. and Shin, Y.C., "Laser-assisted Machining of Silicon Nitride with Complex Geometric Features via In-process Control”, Journal of the American Ceramic Society, Vol. 89, issue 11, pp. 3397-3405, 2006.
• Skvarenina, S., and Shin, Y.C., "Predictive Modeling of Laser Hardening of Complex Surfaces”, Surface and Coatings Technology, Volume 201, Issue 6, pp. 2256-2269, December 2006.
• Xu, C. and Shin, Y.C., “A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis”, The 3rd International Conference on Cybernetics and Information Technologies, Systems and Applications, Orlando, FL, July 20-23, 2006.
• Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride”, ASME International Conf. on Manuf. Science and Engineering, 2006MREC-21008, Oct. 8-11, 2006, Ypsilanti, MI.
• Wu, B. and Shin, Y.C., “From Incident Laser Pulse to Residual Stress: A Complete and Self-closed Model for Laser Shock Peening”, ASME International Conf. on Manuf. Science and Engineering, 2006MREC-21007, Oct. 8-11, 2006, Ypsilanti, MI.
• Xu, C. and Shin, Y.C., “An Adaptive Fuzzy Controller for Constant Cutting Force in Endmilling Processes”, ASME IMECE, IMECE2006-13758, Chicago, IL, Nov. 5-10, 2006.
• Anderson, M. and Shin, Y.C., "Laser-assisted Machining of P550 with an Economic Analysis”, Proc. of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 12, pp. 2055-2067, 2006.
• Tian, Y. and Shin, Y.C., "Laser-assisted Burnishing”, International Journal of Machine Tools and Manufacture. Volume 47, Issue 1, Pages 14-22, January 2007.
• Patwa, R. and Shin, Y.C., “Laser Hardening of AISI5150H Steels”, International Journal of Machine Tools and Manufacture, Vo. 47, No. 2, pp. 307-320, February 2007.
• Wu, B., and Shin, Y.C., "A Self-Closed One-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening”, J. of Applied Physics, 101, No. 2, 023510, 2007.
• Wu, B., and Shin, Y.C., "A Simple Model for High Fluence Ultra-short Pulsed Laser Metal Ablation”, Applied Surface Science, 253, pp. 4079–4084, 2007.
• Choi, T. and Shin, Y.C., “Generalized Intelligent Grinding Advisory System”, International Journal of Production Research, Vol. 45, No. 8, pp. 1899–1932, April, 2007.
• Wu, B. and Shin, Y.C., “From Incident Laser Pulse to Residual Stress: A Complete and Self-closed Model for Laser Shock Peening”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 1, pp. 117-125, 2007.
• Hahn, J.D., Shin, Y.C. and Krane, M., “Laser Transformation Hardening of Ti6Al4V in the Solid State with an Accompanying Kinetic Model” Surface Engineering, Vol. 23, No. 2, pp. 78-82, 2007.
• Li, H. and Shin, Y.C., “A Study on Chatter Boundaries of Cylindrical Plunge Grinding Processes with Process Condition Dependent Dynamics”, International Journal of Machine Tools and Manufacture, vol. 47, No. 10, pp. 1563–1572, 2007.
• Tian, Y. and Shin, Y.C., "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-assisted Machining”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 287-295, 2007.
• Subrahmanya, N., Choi, T. and Shin, Y.C., "Model-Based Optimization of the OD Plunge Grinding Process via Generalized Intelligent Grinding Advisory System (GIGAS)”, Trans. of the North American Manufacturing Research Institution, Vol. 35, pp. 489-496, 2007.
• Li, H. and Shin, Y.C., “A Time Domain Dynamic Simulation Model for Stability Prediction of Infeed Centerless Grinding Processes”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 3, pp. 539-550, 2007.
• Wu, B., and Shin, Y.C., "Two-Dimensional Hydrodynamic Model for Pressures Induced Near the Coating-water Interface during Laser Shock Peening”, J. of Applied Physics, 101, 103514, 2007.
• Tian, Y. and Shin, Y.C., "Thermal Modeling and Experimental Evaluation of Laser-assisted Dressing of Superabrasive Grinding Wheels, Proc. of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 221(4), pp. 605-616, 2007.
• Xu, C. and Shin, Y.C., “Control of Cutting Force for Creep-feed Grinding Processes using a Multi-level Fuzzy Controller”, Trans. of the ASME, Journal of Dynamic Systems, Measurement and Control, Vol. 129, No. 4, pp. 480-492, 2007.
• Xu, C. and Shin, Y.C., “Interaction Analysis for MIMO Nonlinear Systems based on a FBFN model”, Fuzzy Sets and Systems, Vol. 158, 2013-2025, 2007.
• Wu, B., Shin, Y.C., Pakhal, H., Laurendeau, N.M. and Lucht, R.P., “Modeling of the Plasma Induced by High-Power Nanosecond Laser-Metal Interactions in Air and Its Experimental Verification” Physical Review E, 76, 026405, 2007.
• Wu, B., and Shin, Y.C., "A Simple Two-Stage Model for the Formation and Expansion of the Plasma Induced by High Intensity Laser Metal Ablation in Vacuum”, Physics Letters A, available on line, 2007.
• Schoeffel, K. and Shin, Y.C., “Laser Cladding Of Two Hardfacing Alloys Onto Cylindrical Low Alloy Steel Substrates With A High Power Direct Diode Laser”, ASME International Conf. on Manuf. Science and Engineering, 2007MREC-31112, Oct. 15-18, 2007, Atlanta, GA.
• Dandekar, C. and Shin, Y.C. “Multi-Scale Finite Element Modeling Of Machining Unidirectional Fiber Reinforced Composites”, ASME International Conf. on Manuf. Science and Engineering, 2007MREC-311111, Oct. 15-18, 2007, Atlanta, GA.
• Choi, T., Subrahmanya, N., Li, H. and Shin, Y.C., "Practical Generalized Models for Cylindrical Grinding Processes”, International Journal of Machine Tools and Manufacture, 48, 61–72, 2008.
• Lakhkar, R., Shin, Y.C. and Krane, M., “Modeling of Laser Hardening and Backtempering of 4140 Steel and Optimization of Overlapping Patterns” Materials Science and Engineering, A, 480, pp. 209–217, 2008.
• Xu, C. and Shin, Y.C., “A Multi-Level Fuzzy Control Design for General Nonlinear Multi-Input Single-Output Systems”, NAFIPS 2008 – Proc. of 2008 Annual Meeting of the North American Fuzzy Information Processing Society, May 19-22, 2008 New York, NY.
• Xu, C. and Shin, Y.C., “An Adaptive Fuzzy Controller for Constant Cutting Force in Endmilling Processes”, Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031001-1-10, June, 2008.
• Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride and Inconel 718”, Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031013, June, 2008.
• Subrahmanya, N. and Shin, Y.C., "Automated Sensor Selection and Fusion for Monitoring and Diagnostics of Plunge Grinding Processes”, Trans. of the ASME, J. of Manufacturing Science and Engineering Vol. 130, 031014, June, 2008.
• Xu, C. and Shin, Y.C., "A Fuzzy Inverse Model Construction Method for a MISO System”, IEEE Trans. on Fuzzy Systems, Vol. 15, No. 5, pp. 1216-1231, 2008.
• Dandekar, C. and Shin, Y.C., “Multiphase Finite Element Modeling of Machining Unidirectional Composites: Prediction of Debonding and Fiber Damage”, Trans. of the ASME, J. of Manufacturing Science and Engineering 130, 051016 (2008).
• Cao, Y., Shin, Y.C. and Wu, B., “A Parametric Study On Overlapping Laser Shock Peening Of 4140 Steel Via Modeling And Experiments”, ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72259, Oct. 8-10, 2008, Evanston, IL.
• Shelton, J.A. and Shin, Y.C., “An Experimental Evaluation Of Laser-Assisted Micromilling Of Two Difficult To Machine Alloys”, ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72246, Oct. 8-10, 2008, Evanston, IL.
• Hu, W., Shin, Y.C. and King, G.B., “Micromachining of Metals, Alloys and Ceramics By Picosecond Laser Ablation”, ASME International Conf. on Manuf. Science and Engineering, MSEC_ICMP2008-72247, Oct. 8-10, 2008, Evanston, IL.
• Shin, Y.C. and Xu, C., Intelligent Systems: Modeling, Optimization and Control, CRC Press, Taylor and Francis, 456 pages, Dec. 2008.
• Li, H. and Shin, Y.C., “Integration of Thermo-Dynamic Spindle and Machining Simulation Models for A Digital Machining System”, International Journal of Advanced Manufacturing Technology, 40:648–661, 2009.
• Wu, B. and Shin, Y.C., “A Simplified Model for High Fluence Ultra-short Pulsed Laser Ablation of Semiconductors and Dielectrics”, Applied Surface Science, Volume 255, Issue 9, 4996-5002, February 2009.
• Bailey, N., Tan, W. and Shin, Y.C., “ Predictive Modeling and Experimental Results for Residual Stresses in Laser Hardening of AISI 4140 Steel by a High Power Diode Laser ”, Surface and Coatings Technology, Volume 203, Issue 14, 15, pages 2003-2012, April 2009. 
• Truesdale, S. and Shin, Y.C., " Microstructural Analysis and Machinability Improvement of Udimet 720 via Cryogenic Milling ”, International Journal of Machining Science and Technology , Volume 13, Issue 1, pages 1 – 19, January 2009.
• Subrahmanya, N. and Shin, Y.C., “Adaptive Divided Difference Filtering for Simultaneous State and Parameter Estimation”, Automatica, 45, 1686-1693, 2009.
• Xu, C. and Shin, Y.C., “A Hierarchical Self-tuning Fuzzy Controller for General Nonlinear Systems with Stability Analysis”, Control and Intelligent Systems, Vol. 37, 201-2006, 2009.
• Dandekar, C. and Shin, Y.C., “Multi-step 3D Finite Element Modeling of Subsurface Damage in Machining Particulate Reinforced Metal Matrix Composites”, Composites, Part A, Volume 40, Issue 8, Pages 1231-1239, August 2009.
• Lee, C.W. and Shin, Y.C., “Growing Radial Basis Function Networks Using Genetic Algorithm and Orthogonalization”, International Journal of Innovative Computing, Information and Control, Vol. 5, Number 11(A), pp. 3933-3948, November 2009. 
• Wen, S., Shin, Y.C., Murthy, J.Y. and Sojka, P.E., “Modeling of Coaxial Powder Flow for the Laser Direct Deposition Process”, International J. of Heat and Mass Transfer, 52, Issues 23-24, 5867–5877 (2009).
• Shin, Y.C., Hu, W., King, G., “Efficient Machining of Materials by Picosecond Laser Ablation”, Proc. of the NSF Grantees Conference, June 22-24, 2009, Honolulu, Hawaii.
• Wen, S. and Shin, Y.C., “Modeling of the Off-axis High Power Diode Laser (HPDL) Cladding Process”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84049, Oct. 4-7, 2009, W. Lafayette, IN.
• Dandekar, C. and Shin, Y.C., “Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-840138, Oct. 4-7, 2009, W. Lafayette, IN.
• Cao, Y. and Shin, Y.C., “Shock Wave Propagation and Spallation Study in Laser Shock Peening”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84048, Oct. 4-7, 2009, W. Lafayette, IN.
• Bailey, N.S. and Shin, Y.C., “Optimization of Laser Hardening Processes for Industrial Parts with Complex Geometry Via Predictive Modeling”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84012, Oct. 4-7, 2009, W. Lafayette, IN.
• Wu, B.X. and Shin, Y.C., “A Unified Simple Predictive Model for High Fluence Ultra-short Pulsed Laser Ablation of Metal, Semiconductor and Dielectric”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-84317, Oct. 4-7, 2009, W. Lafayette, IN.
• Barnes, J.E., Shin, Y.C., Brandt, M., and Sun, S.J., “High Speed Machining of Titanium Alloys”, 4th International Light Metals Technology Conference (LMT 2009), JUN 29-JUL 01, 2009 Gold Coast, AUSTRALIA, Light Metals Technology, Book Series: Materials Science Forum, Volume: 618-619, Pages: 159-163, 2009.
• Subrahmanya, N. and Shin, Y.C., “Sparse Multiple Kernel Learning for Signal Processing Applications”, IEEE Trans. on Pattern Analysis and Machine Intelligence, Vol. 32 Issue: 5, pp. 788 – 798, May 2010.
• Subrahmanya, N., Shin, Y.C. and Meckl, P.H., "A Bayesian Machine Learning Method for Sensor Selection and Fusion with Application to On-Board Fault Diagnostics”, Mechanical Systems and Signal Processing, 24, 182–192, 2010.   
• Hu, W., Shin, Y.C. and King, G.B., “Multi-burst Mode Pico-Second Laser Ablation for Improved Material Removal Rate”, Applied Physics, A, Volume 98, Number 2, Pages 407-415, February, 2010.
• Ding, H. and Shin, Y.C., “Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis”, International Journal of Machine Tools and Manufacture, Volume 50, Issue 1, Pages 106-114, January 2010. 
• Dandekar, C., Shin, Y.C., and Barnes, J. “Machinability Improvement of Ti6Al4V Alloy via LAM and Hybrid Machining”, International Journal of Machine Tools and Manufacture, Vol. 50, Issue 2, Pages 174-182, February 2010. 
• Fortunato, A., Zhao, X. and Shin, Y.C., “Fabrication of Waveguides and Microfluidic Channels in Fused Silica by a Femtosecond Laser”, Proc. of the 5th International Conference on MicroManufacturing, pp: 255-260, April 5-8, 2010, Madison, Wisconsin.
• Shelton, J.A. and Shin, Y.C., “Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration”, Proc. of the 5th International Conference on MicroManufacturing, pp. 309-318, April 5-8, 2010, Madison, Wisconsin.
• Hu, W., Shin, Y.C. and King, G.B., “Micromachining of Metals, Alloys and Ceramics by Picosecond Laser Ablation”, Trans. of the ASME,  J. of Manuf. Science and Engineering, Volume 132, Issue 1, 011009, February 2010.
• Shelton, J.A. and Shin, Y.C., “Experimental Evaluation of Laser-Assisted Micro-Milling in a Slotting Configuration”, Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 2, 021008, April 2010. 
• Shelton, J.A. and Shin, Y.C., “Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration”, Journal of Micromechanics and Microengineering, Vol. 20, No. 7, 075012, 2010.
• Dandekar, C. and Shin, Y.C., “Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite”, Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 6, 061004, 2010.
• Subrahmanya, N. and Shin, Y.C., “Constructive Training of Recurrent Neural Networks Using Hybrid Optimization”, Neurocomputing, Vol. 73, Issues 13-15, August 2010, Pages 2624-2631. 
• Cao, Y. and Shin, Y.C., “Shock Wave Propagation and Spallation Study in Laser Shock Peening”, Trans. of the ASME, Journal of Engineering Materials and Technology, Volume 132,   Issue 4, 041005, October 2010.
• Davis, T., Shin, Y.C., and Yao, B. “Observer-Based Adaptive Robust Control of Friction Stir Welding Axial Force”, Proc. of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM 2010), July 6-9, 2010, Montréal, Canada.
• Wen, S. and Shin, Y.C. “Modeling of Transport Phenomena during the Coaxial Laser Direct Deposition Process”, Journal of Applied Physics, 108, 044908 (2010).
• Hu, W., Shin, Y.C. and King, G.B., “Energy Transport Analysis in Ultra-Short Pulse Laser Ablation through Combined Molecular Dynamics and Monte Carlo Simulation”, Physical Review B, 82, 094111 (2010).
• Davis, T., Shin, Y.C. and Yao, B., “Observer-based Adaptive Robust Control of Friction Stir Welding Axial Force”, IEEE-ASME Trans. on Mechatronics, in press (2010). 
• Shin, Y.C., “Laser-assisted Machining: Its Benefits and Potential”, Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
• Wen, S. and Shin, Y.C., “Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes”, Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
• Hu, W. and Shin, Y.C., “High Precision Scribing of Solar Cell Films by a Picosecond Laser”, Proc. of the International Congress on Applications of Lasers & Electro-Optics (ICALEO), September 26-30, 2010, Los Angeles, CA.
• Cao, Y., Shin, Y.C. and Wu, B., “A Parametric Study on Overlapping Laser Shock Peening of 4140 Steel via Modeling and Experiments”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 132,  Issue 6, December 2010, 061010. 
• Hippalgaonkar, R. and Shin, Y.C., “Robust Optimization of Machining Conditions with Tool Life and Surface Roughness Uncertainties”, International Journal of Production Research, Volume 49, Issue 13, 2011, Pages 3963 - 3978.
• Shin, Y.C., Hu, W., King, G., “High Aspect Ratio Microhole Drilling Using Ultrashort Lasers”, Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.
• Davis, T. and Shin, Y.C., “Vision-Based Clad Height Measurement”, Machine Vision and Applications, Vol. 22, No. 1, pp. 129–136, 2011. 
• Shin, Y.C., Cheng, G., Hu, W., Zhang, M.T., Lee, S., “High Precision Scribing of Thin Film Solar Cells by a Picosecond Laser”, Proc. of the NSF Grantees Conference, Jan. 3-7, 2011, Atlanta, GA.
• Wen, S. and Shin, Y.C. “Modeling of the Laser Direct Deposition Process by a High Power Direct Diode Laser”, Trans. of the ASME, J. of Heat Transfer,  Volume 133, Issue 3, 031007, March 2011. 
• Rao, B., Dandekar, C.R., and Shin, Y.C., “An Experimental and Numerical Study on the Face Milling of Ti-6Al-4V Alloy”, Journal of Materials Processing Technology, 211 Feb. 2011,  294–304.
• Xu, C. and Shin, Y.C., “A Self-tuning Multivariable Fuzzy Controller for General Multi-Input Multi-Output Nonlinear Systems”, Engineering Applications of Artificial Intelligence, Volume 24, Issue 2, March 2011, Pages 238-250. 
• Dandekar, C.R. and Shin, Y.C., “Effect of Porosity on the Interface Behavior of an Al₂o₃-Aluminum Composite: A Molecular Dynamics Study”, Composites Science and Technology, 71, 2011, pp. 350–356.
• Dandekar, C.R. and Shin, Y.C., “Molecular Dynamics Based Cohesive Zone Law for Describing Al-SiC Interface Mechanics”, Composites, Part A, Volume 42, Issue 4, April 2011, Pages 355-363.
• Zhao, X. and Shin, Y.C., “Femtosecond Laser Drilling of High Aspect Ratio Microchannels in Glass”, Applied Physics A, Volume 104, Number 2, 713-719, 2011.
• Wen, S. and Shin, Y.C., “Comprehensive Predictive Modeling and Parametric Analysis of Multi-Track Direct Laser Deposition Processes”, Journal of Laser Applications, 23, 022003 (2011).
• Tan, W., Bailey, N. and Shin, Y.C., “A Novel Integrated Model Combining Cellular Automata and Phase Field Methods for Microstructure Evolution during Solidification of Multi-Component and Multi-Phase Alloys”, Computational Materials Science. Vol. 50, Issue 9, July 2011, Pages 2573-2585.
• Tan, W., Wen, S., Bailey, N.S. and Shin, Y.C., “Numerical Modeling of Transport and Dendritic Growth in Laser Conduction Welding of 304 Stainless Steel”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50219, June 13-17, 2011, Corvallis, Oregon.
• Ding, H. and Shin, Y.C., “Dislocation density-based grain refinement modeling of orthogonal cutting of commercially pure titanium”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50220, June 13-17, 2011, Corvallis, Oregon.
• Ding, H., Shen, N. and Shin, Y.C., “Experimental and numerical modeling analysis of micro-milling of hardened H13 tool steel”, ASME International Conf. on Manuf. Science and Engineering, MSEC2011-50244, June 13-17, 2011, Corvallis, Oregon.
• Davis, T., Ngo, P. and Shin, Y.C., “Adaptive Fuzzy Logic Control of Friction Stir Welding Axial Force”, International Journal of Advanced Manufacturing Technology, in press, 2011.
• Ding, H., Shen, N. and Shin, Y.C., “Experimental and Numerical Modeling Analysis of Micro Milling of Hardened H13 Tool Steel”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 133, Issue 4, August 2011, 041007.
• Xu, C. and Shin, Y.C., "An Adaptive Fuzzy Controller for MISO Systems with Stability Analysis”, IEEE Trans. on Industrial Electronics, 2011, in press.
• Ding, H. and Shin, Y.C., “Modeling of Grain Refinement in Aluminum and Copper subject to Cutting”, Computational Materials Science, Volume 50, Issue 10, August-September 2011, Pages 3016-3025.

   

   Click here to see the separate journal list with doi.