Papers on Mechanics and Modeling of Machining Processes
Papers on Mechanics and Modeling of Machining Processes
Dong, X. and Shin, Y.C., “Multi-scale Modeling of Alumina Ceramics Undergoing Laser-assisted Machining”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, 2015, in press. doi:10.1115/1.4029858
Hedberg, G. and Shin, Y.C., “Laser Assisted Milling of Ti-6Al-4V ELI with the Analysis of Surface Integrity and Its Economics”, Lasers in Manufacturing and Materials Processing, Vol.2, Issue 3, pp. 164-185, 2015. DOI: 10.1007/s40516-015-0013-4
Dong, X. and Shin, Y.C., “Coupled Thermo-mechanical Multi-scale Modeling of Alumina to Predict Thermally Induced Fractures under Laser Heating”, Journal of the American Ceramic Society, Volume 98, Issue 3, pages 920–928, March 2015. Doi:10.1111/jace.13349
Hedberg, G., Shin, Y.C. and Xu, L., “Laser-assisted Milling of Ti-6Al-4V with the Consideration of Surface Integrity”, International Journal of Advanced Manufacturing Technology, August 2015, Volume 79, Issue 9-12, pp 1645-1658. DOI 10.1007/s00170-015-6942-4
Ding, H. and Shin, Y.C., “Dislocation Density-based Grain Refinement Modeling of Orthogonal Cutting of Commercially Pure Titanium”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, 136 (4), 041003, 2014. doi: 10.1115/1.4027207.
Ding, H. and Shin, Y.C., “Multi-physics Modeling and Simulations of Surface Microstructure Alteration in Hard Turning”, Journal of Materials Processing Technology, Vol. 213, Issue 6, June 2013, Pages 877–886. dx.doi.org/10.1016/j.jmatprotec.2012.12.016.
Wou, J., Shin, Y.C., El-Mounayri, H.A., “Ball End Milling Mechanistic Model Based on A Voxel-Based Geometric Representation and A Ray Casting Technique”, Journal of Manufacturing Processes, 15, 2013, 338–347. http://dx.doi.org/10.1016/j.jmapro.2012.12.003.
Dandekar, C.R. and Shin, Y.C., “Multi-scale Modeling of Subsurface Damage in Laser-assisted Machining of Particulate Reinforced Metal Matrix Composite”, Journal of Materials Processing Technology, Vol. 213, Issue 2, February 2013, Pages 153–160. http://dx.doi.org/10.1016/j.jmatprotec.2012.09.010
Dandekar, C.R. and Shin, Y.C., “Experimental Evaluation of Laser-Assisted Machining of Silicon Carbide Particle Reinforced Aluminum Matrix Composites”, International Journal of Advanced Manufacturing Technology, Volume 66, Issue 9 (2013), Page 1603-1610. DOI: 10.1007/s00170-012-4443-2
Ding, H. and Shin, Y.C., “Improvement of Machinability of Waspaloy via Laser-assisted Machining”, International Journal of Advance Manufacturing Technology, Volume 64, Issue 1-4, January 2013, pp 475-486. DOI: 10.1007/s00170-012-4012-8
Ding, H. and Shin, Y.C., “Improving Machinability of High Chromium Wear Resistant Materials via Laser–assisted Machining”, Machining Science and Technology, 2013, 17:2, 246-269. http://dx.doi.org/10.1080/10910344.2013.780549
Ding, H. and Shin, Y.C., “A Metallo-thermo-mechanically Coupled Analysis of Orthogonal Cutting of AISI 1045 Steel”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 134, October 2012, 051014. http://dx.doi.org/10.1115/1.4007464
Dandekar, C.R. and Shin, Y.C., “Modeling of Machining of Composites: A Review”, International Journal of Machine Tools and Manufacture, Volume 57, June 2012, Pages 102–121. http://dx.doi.org/10.1016/j.ijmachtools.2012.01.006
Ding,
H., Shen, N. and Shin, Y.C., “Thermal and
Mechanical Modeling Analysis of Laser-assisted Micro Milling of
Difficult-to-machine Alloys”, Journal of Materials Processing Technology,
Volume 212, Issue 3, March 2012, Pages 601–613.
doi:10.1016/j.jmatprotec.2011.07.016
Ding, H., Shen, N. and Shin, Y.C., “Experimental and Numerical Modeling Analysis of Micro Milling of Hardened H13 Tool Steel”, Trans. of the ASME, Journal of Manufacturing Science and Engineering, Volume 133, Issue 4, August 2011, 041007. doi:10.1115/1.4004499.
Ding, H. and Shin, Y.C., “Modeling of Grain Refinement in Aluminum and Copper subject to Cutting”, Computational Materials Science, Volume 50, Issue 10, August-September 2011, Pages 3016-3025. Doi:10.1016/j.commatsci.2011.05.020.
Rao, B., Dandekar, C.R., and Shin, Y.C., “An Experimental and Numerical Study on the Face Milling of Ti-6Al-4V Alloy”, Journal of Materials Processing Technology, Vol. 211, Issue 2, February 2011, Pages 294-304. 10.1016/j.jmatprotec.2010.10.002
Dandekar, C. and Shin, Y.C., “Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite”, Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 6, 061004, 2010. doi:10.1115/1.4002548
Hippalgaonkar, R. and Shin, Y.C., “Robust Optimization of Machining Conditions with Tool Life and Surface Roughness Uncertainties”, International Journal of Production Research, Volume 49, Issue 13, 2011, Pages 3963 - 3978. doi: 10.1080/00207543.2010.495207
Shelton, J.A. and Shin, Y.C., “Experimental Evaluation of Laser-Assisted Micro-Milling in a Slotting Configuration”, Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 2, 021008, April 2010. http://dx.doi.org/10.1115/1.4001142
Dandekar, C. and Shin, Y.C., “Machinability Improvement of Ti6Al4V Alloy via LAM and Hybrid Machining”, International Journal of Machine Tools and Manufacture, Volume 50, Issue 2, pp. 174-182, February 2010. doi:10.1016/j.ijmachtools.2009.10.013.
Ding, H. and Shin, Y.C., “Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis”, International Journal of Machine Tools and Manufacture, Volume 50, Issue 1, Pages 106-114, January 2010. doi:10.1016/j.ijmachtools.2009.09.001
Barnes, J.E. Shin, Y.C., Brandt, M. and Sun, S., “High Speed Machining of Titanium Alloys”, Materials Science Forum Vols. 618-619 (2009), pp 159-163. doi:10.4028/www.scientific.net/MSF.618-619.159
Dandekar, C. and Shin, Y.C., “Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite”, ASME International Conf. on Manuf. Science and Engineering, MSEC2009-840138, Oct. 4-7, 2009, W. Lafayette, IN.
Dandekar, C. and Shin, Y.C., “Multi-step 3D Finite Element Modeling of Subsurface Damage in Machining Particulate Reinforced Metal Matrix Composites”, Composites, Part A, Volume 40, Issue 8, Pages 1231-1239, August 2009, doi:10.1016/j.compositesa.2009.05.017.
Truesdale, S. and Shin, Y.C., " Microstructural Analysis and Machinability Improvement of Udimet 720 via Cryogenic Milling ”, International Journal of Machining Science and Technology , Volume 13, Issue 1, pages 1 – 19, January 2009.
Dandekar, C. and Shin, Y.C., "Multi-Phase Finite Element Modeling of Machining Unidirectional Composites: Prediction of Debonding and Fiber Damage”, Transaction of ASME, J. of Manufacturing Science and Engineering, Vol. 130, Iss.5, 051016, October 2008. doi:10.1115/1.2976146
Li, H. and Shin, Y.C., “A Time Domain Dynamic Simulation Model for Stability Prediction of Infeed Centerless Grinding Processes”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 3, pp. 539-550, 2007. doi:10.1115/1.2716729
Tian, Y. and Shin, Y.C., "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-assisted Machining”, Transaction of ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 287-295, 2007. doi:10.1115/1.2673595
Li, H. and Shin, Y.C., “A Study on Chatter Boundaries of Cylindrical Plunge Grinding Processes with Process Condition Dependent Dynamics”, International Journal of Machine Tools and Manufacture, vol. 47, No. 10, pp. 1563–1572, 2007. doi:10.1016/j.ijmachtools.2006.11.009
Li, H. and Shin, Y.C., “Wheel Regenerative Chatter of Surface Grinding”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 393-403, May 2006. http://dx.doi.org/10.1115/1.2137752
Li, H. and Shin, Y.C., “Predictive Chatter Model of Cylindrical Grinding Processes”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 404-415, May 2006. doi: http://dx.doi.org/10.1115/1.2118748
Li, H. and Shin, Y.C., “A Comprehensive Dynamic End Milling Simulation Model”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 86-95, Feb. 2006. http://dx.doi.org/10.1115/1.2035694
Tian, Y. and Shin, Y.C., “Finite Element Modeling of Machining of 1020 Steel Including the Effects of Round Cutting Edge” Transactions of North American Manufacturing Research Institution, Vol. 32, pp. 111-118, June 2004.
Rao, B. and Shin, Y.C., “An Experimental Study on High Speed Machining of TiAl6V4 Alloy”, ASME IMECE, IMECE-39098, CD volume 3, Nov. 2002, New Orleans, LA.
Clancy, B.E., Rao, B. and Shin, Y.C., "Time Domain Chatter Prediction Including Tool Wear Effects During Face Turning of Nickel-based Super Alloys", Transactions of North American Manufacturing Research Institution, Vol. 30, pp. 377-384, May 2002.
Rao, B. and Shin, Y.C., "Analysis of three-dimensional machining using an extended Oblique Machining Theory”, Journal of Machining Science and Technology, Vol. 6, No. 2, pp. 187-213, 2002.
Clancy, B.E. and Shin, Y.C., “A Comprehensive Chatter Prediction Model for Face Turning Operation Including the Tool Wear Effect”, International Journal of Machine Tools and Manufacture, Vol. 42, Issue 9, pp. 1035-1044, 2002.
Rao, B. and Shin, Y.C., “High Speed Machining of 7075-T6 Aluminum Using Carbide and Diamond Tools, International Journal of Machine Tools and Manufacture. Vol. 41/12, pp. 1763-1781, June 2001.
Clancy, B.E., Rao, B. and Shin, Y.C., “Mechanistic Force Modeling With Time-Dependent Characteristics Due To Tool Wear For Face Turning of Ni-Based Super Alloys", Transactions North American Manufacturing Research Institution, Vol. 29, pp. 311-318, May 2001.
Rao, B. and Shin, Y.C., “A Comprehensive Dynamic Cutting Force Model for Chatter Prediction in Turning”, International Journal of Machine Tools and Manufacture, Vol. 39, Issue 10, pp. 1631-1654, October 1999.
Lei, S., Shin, Y.C. and Incropera, F.P., “Thermo-Mechanical Modeling of Orthogonal Machining Processes by Finite Element Analysis”, International Journal of Machine Tools and Manufacture, Vol. 39, Issue 5, pp. 731-750, February 1999.
Lei, S., Shin, Y.C. and Incropera, F.P., “Constitutive Modeling of Material Deformation Under High Strain Rates and Temperatures through Orthogonal Machining Tests”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 577-585, November, 1999.
Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 1 - Theory for Stability Lobe Prediction”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 600-605, November, 1999.
Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 2 - Experimental Validation and Influencing Factors”, Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 606-614, November, 1999.
Leshock, C.E. and Shin, Y.C., "Study on the Tool Temperature in Turning by a Tool-Work Thermocouple Technique", Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 119, No. 4, pp. 502-508, November 1997.
Lei, S., Shin, Y.C. and Incropera, F.P., “Constitutive Modeling of Material Deformation Under High Strain Rates and Temperatures through Orthogonal Machining Tests”, Proceedings of the ASME Manufacturing Science and Engineering, MED-Vol. 6-2, pp. 91-98, ASME IMECE, November, 1997, Dallas, Texas.
Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 1 - Theory for Stability Lobe Prediction”, Proceedings of the ASME Manufacturing Science and Engineering, ASME IMECE, MED-Vol. 6-2, pp. 403-410, November, 1997, Dallas, Texas.
Jensen, S.A. and Shin, Y.C., “Stability Analysis in Facemilling Operation: Part 2 - Experimental Validation and Influencing Factors”, Proceedings of the ASME Manufacturing Science and Engineering, MED-Vol. 6-2, pp. 411-418, ASME IMECE, November, 1997, Dallas, Texas.
Shin, Y.C. and Waters, A.J., "An Improved Method to Determine Cutting Force Coefficients for Mechanistic Modeling of Machining Processes", International Journal of Machine Tools and Manufacture, Vol. 37, No. 9, pp. pp. 1337 1351, September 1997
Elanayar, S.V.T. and Shin, Y.C., "Modeling of Tool Forces for Worn Tools: Flank Wear Effects", Transactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 118, No. 3, pp. 359-366, August, 1996.
Leshock, C. and Shin, Y.C., "Study on the Tool-Chip Interface Temperature in Turning by a Tool-Work Thermocouple Technique", Proc. of Manufacturing Science and Engineering, Vol. 1, pp. 189-201, Symposium on Material Removal and Surface Modification Issues in Machining Processes, ASME IMECE, San Francisco, Nov. 12-17, 1995.
Elanayar, S.V.T. and Shin, Y.C., "Modeling of Tool Forces for Worn Tools: - Flank Wear Effects", Materials Issues in Machining II and The Physics of Machining Processes II, TMS & ASME, pp. 341-361, Symposium on "Mechanics of Machining", ASME WAM, 1994, Chicago, IL.
Shin, Y.C. and Waters, A.J., "Face Milling Process Modeling with Bearing Nonlinearity", Transactions of North American Manufacturing Research Institution of SME, Vol. 22, pp. 157-163, May 1994.
Shin, Y.C. and Betts, C.A., "Control of Chips in the Turning of 4150 Steel by Using an Obstruction Type Chip Breaker", Transactions of ASME, Journal of Engineering for Industry, Vol. 115, No.1, pp. 160-163, 1993.
Shin, Y.C. and Waters, A.J., "Process Design through Machining Process Simulation for Face Milling", Seminars and Applications on A Systems Approach to Machining, May 4-5. 1993, Cincinnati, Ohio, pp. 158-164.
Shin, Y.C. and Joo, Y.S., "Optimization of Machining Conditions with Practical Constraints", International Journal of Production Research, Vol. 30, No. 12, pp. 2907-2919, 1992.
Shin, Y.C., Oh, S.J., Ruud, C.O., "Investigation of Residual Stresses of Machined Surface by an X-ray Diffraction Technique", Nondestructive Characterization of Materials IV, pp. 409-418, 1991.
[ Welcome ] [ Research
] [ Education ] [ Laboratories ] [ Collaboration
] [ People ]
© 2001 Purdue ME Manufacturing Laboratories
Last modified by Web-master, 21 February 2001.