banner

Andrea's Publications

Monika's Publications go

 

    Last Update: March 14, 2013

    Books

  1. Berta, G.L., Vacca, A., 2004, Sperimentazione sui Motori a Combustione Interna (in italian), Monte Università Parma Editore – Collana Saperi (ISBN 88-7847-097-X)

    2. Journal Papers

  2. Cristofori D., Vacca A., 2012, A Novel Pressure-Feedback Based Adaptive Control Method to Damp Instabilities in Hydraulic Machines, Presented at: 2012 SAE Commecial Vehicles Engineering Congress, Oct. 2-3, 2012, Rosemont IL, USA. Selected for publication in: SAE Int. J. Commer. Veh. 5(2):2012, doi:10.4271/2012-01-2035.
  3. Dhar S., Vacca A., 2012, A Novel CFD- Axial Motion Coupled Model for the Axial Balance of Lateral Bushings in External Gear Machines, Elsevier Simulation and Modeling Practice and Theory. 2012; 26: 60-76.
  4. Casoli P., Vacca A., Anthony A., Berta G.L., 2012, Modellazione della Valvola di Controllo di un Sollevatore Agricolo (in italian), Oleodinamica e Pneumatica, January 2012, Tecniche Nuove, Milano, Italy
  5. Cristofori D., Vacca A., 2011, The Modeling of Electro-Hydraulic Proportional Valves, ASME Journal of Dynamic Systems, Measurement and Control, Vol.134, Issue 2, 021008 (13 pages)
  6. Vacca A., Guidetti M., 2011, Modelling and Experimental Validation of External Spur Gear Machines for Fluid Power Applications, Elsevier Simulation Modelling Practice and Theory, 19 (2011) 2007–2031
  7. Campanella G., Vacca A., 2011, Modellazione numerica di un distributore Flow Sensing (in italian), accepted for publication on Oleodinamica e Pneumatica, Tecniche Nuove, Milano, Italy (publication expected in 2011)
  8. Casoli P., Greco M.,Vacca A., Lettini A., 2011, Sistema telemetrico per l’acquisizione della pressione nel vano (in italian), Oleodinamica e Pneumatica, June 2011, Tecniche Nuove, Milano, Italy
  9. Vacca, A., Klop, R., Ivantysynova, M., 2010, A Numerical Approach for the Evaluation of the Effects of Air Release and Vapour Cavitation on Effective Flow Rate of Axial Piston Machines, International Journal of Fluid Power, Vol. 11, N.1, March 2010
  10. Casoli, P., Vacca, A., Berta, G.L., 2009, A Numerical Procedure for Predicting the Performance of High Pressure Homogenizing Valves, Elsevier SIMPAT journal - Simulation Modelling Practice and Theory 18 (2010) 125–138
  11. Vacca, A., Bottazzi, A., 2009, Tecniche RSM per progettare una valvola limitatrice di pressione (in Italian), Oleodinamica-Pneumatica – Tecniche Nuove, Milano, n. 7 Luglio 2009
  12. Vacca, A., Franzoni, G., Bonati, F., 2008, An Inclusive, System-Oriented Approach for the Study and the Design of Hydrostatic Transmissions: The Case of an Articulated Boom Lift, presented at 2008 SAE Commercial Vehicle Engineering Congress and Exhibition, October 7 - 9, 2008 Rosemont, IL, USA. Published in SAE Int. Journal of Commercial Vehicles vol. 1, April 2009 pp. 488-494
  13. Bonati, F., Franzoni, G., Vacca, A., 2007, Trasmissioni Idrostatiche per Piattaforme Aeree Articolate (in italian), Oleodinamica-Pneumatica – Tecniche Nuove, Milano. N. 11 Dicembre 2007. Pubblished also in Fluid – Trasmissioni di Potenza n. 3 Maggio 2008
  14. Vacca, A., Cerutti, M., 2007, Analysis and Optimization of a Two-Way Valve Using Response Surface Methodology, International Journal of Fluid Power, Vol. 8, N. 3, November 2007, pp. 43-59
  15. Casoli, P., Vacca, A., Franzoni, G., Berta, G.L., 2006, Modelling of fluid properties in hydraulic positive displacement machines, Simulation Modelling Practice and Theory 14 (2006) 1059–1072 – Elsevier
  16. Facchini, B., Innocenti, L., Vacca, A., 2004, A 1-D Model of the “Coldbridge” Cooling Technique Applied to Gas Turbine Blades, International Journal of Heat & Technology, Volume 22, n.1, 2004
  17. Casappa,R., Casoli,P., Vacca, A., 2003, Gruppo di potenza per decespugliatore agricolo (in italian), Oleodinamica-Pneumatica – Tecniche Nuove, Milano. N. 10 Novembre 2003
  18. Berta, G.L., Vacca, A., Franzoni, G., Guidetti, M., 2003, Load Sensing-Prioritätsventile – Model fur die Funktionssimulation (in german), O+P - Ölhydraulik und Pneumatik - 47 (2003) Nr. 10., Oktober 2003,
  19. Berta, G.L., Casoli,P., Vacca, A., Guidetti, M., 2004, Un codice per la simulazione di una pompa volumetrica a pistoni assiali (in italian), Oleodinamica-Pneumatica – Tecniche Nuove, Milano. N. 4 Aprile 2002

    20. Conference Papers

  20. Devendran R., Vacca A., 2012, Optimal Design of Gears and Lateral Bushes of External Gear Machines, FPMC 2012 Bath/ASME Symposium on Fluid Power and Motion Control, September 12-14 2012, Bath, UK
  21. Dhar S., Vacca A., 2012, A Novel Elastohydrodynamic Model for the Lubricating Gaps in External Gear Machines: Evaluation of Axial Balance, 7th FPNI PhD Symposium on Fluid Power, 27-30 June 2012, Reggio Emilia, Italy
  22. Cristofori D., Vacca A., 2012, Adaptive Vibration Damping Method for Hydraulic Machines: the Case of a Hydraulic Crane, 7th FPNI PhD Symposium on Fluid Power, 27-30 June 2012, Reggio Emilia, Italy
  23. Dhar S., Vacca A., Lettini A., 2012, A Fluid – Structure Interaction model to analyze Axial Balance in External Gear Machines, 8th IFK International Fluid Power Conference, 26th - 28th March 2012, Dresden, Germany
  24. Schweiger W., Scheofman W., Vacca A., 2011, A Omni-Comprehensive Approach for the Design and Simulation of Gerotor Pumps, 8th IFK International Fluid Power Conference, 26th - 28th March 2012, Dresden, Germany
  25. Schweiger W., Scheofman W., Vacca A., 2011, Gerotor Pumps for Automotive Drivetrain Applications: A Multi Domain Simulation Approach, SAE COMVEC 2011, SAE 2011 Commercial Vehicle Engineering Congress, September 13-14, 2011 Rosemont, IL, USA
  26. Vacca A., Dhar S., Opperwall T., 2011, A Coupled Lumped Parameter and CFD Approach for Modeling External Gear Machines, SICFP2011 The Twelfth Scandinavian International Conference on Fluid Power, May 18-20, 2011, Tampere, Finland
  27. Cristofori D., Vacca A., 2011, Electro-Hydraulic Proportional Valve Modeling Comprehending Magnetic Hysteresis, IFPE2011, 52nd National Conference on Fluid Power, March 22-26 2011, Las Vegas, Nevada, US
  28. Campanella G., Vacca A., 2010, Modeling and Optimization of the Control Strategy for the Hydraulic System of an Articulated Boom Lift, SAE 2010 Commercial Vehicle Engineering Congress, October 5-6, 2010, Rosemont, Illinois, USA SAE Excellence in Oral Presentation Award
  29. Zecchi M., Vacca A., Casoli P., 2010, Numerical analysis of the lubricating gap between bushes and gears in external spur gear machines, FPMC 2010 Bath/ASME Symposium on Fluid Power and Motion Control, September 15-17 2010, Bath, UK
  30. Casoli P., Vacca A., Greco M., Berta G.L., 2010, Analisi sperimentale e numerica del funzionamento di macchine volumetriche ad ingranaggi esterni (in italian), 65° Congresso Nazionale ATI, 13-17 Settembre 2010, Domus de Maria,Cagliari, Italy
  31. Vassena A., Vacca A., 2010, Design Optimization of the Sliding Elements of External Gear Machines, 6th FPNI – PhD Symposium, June 15-19 2010, West Lafayette (IN), USA
  32. Greco M., Vacca A., Casoli P., 2010, Experimental Measurement and Numerical Simulation of the "Inter-Teeth Space Pressure" in External Gear Pumps, 6th FPNI – PhD Symposium, June 15-19 2010, West Lafayette (IN), USA
  33. Anthony A., Casoli P., Vacca A., 2010, Analysis of a Tractor Rear Hitch Control System, 6th FPNI – PhD Symposium, June 15-19 2010, West Lafayette (IN), USA
  34. Cristofori D., Vacca A., 2010, Analysis of the Dynamics of a Proportional Valve Operated by an Electronic Controller, 6th FPNI – PhD Symposium, June 15-19 2010, West Lafayette (IN), USA
  35. Casoli P., Vacca A., Anthony A., Berta G.L., 2010, Numerical and Experimental Analysis of the Hydraulic Circuit for the Rear Hitch Control in Agricultural Tractors, 7IFK International Fluid Power Conference, 22-24 March 2010, Aachen, Germany
  36. Klop, R., Vacca, A., Ivantysynova, M., 2009, A Method of Characteristics Based Coupled Pump/Line Model to Predict Noise Sources of Hydrostatic Transmission, Bath/ASME Symposium on Fluid Power & Motion Control (FPMC 2009). 12-14 October 2009, Hollywood, California
  37. Casoli, P., Vacca, A., Berta, G.L., Zecchi, M., 2009, A CFD Analysis of the Flow Field in the Lateral Clearance of External Gear Pumps, The 11th Scandinavian Int. Conference on Fluid Power, SICFP’09, June 2-4, 2009, Linköping, Sweden.
  38. Vacca, A., Casoli, P., Greco, M., 2009, Experimental Analysis of Flow through External Gear Machines. ICFP 2009 Seventh Int. Conference on Fluid Power Transmission and Control, April 7-10, 2009 Hangzhou, China
  39. Casoli, P., Vacca, A., Berta, G.L., 2008, Optimization of Relevant Design Parameters of External Gear Pumps, The Seventh JFPS International Symposium on Fluid Power, September 15-18, 2008, Toyama, Japan
  40. Casoli, P., Vacca, A., Franzoni, G., Guidetti, M., 2008, Effects of Some Relevant Design Parameters on External Gear Pumps Operating: Numerical Predictions and Experimental Investigations, 6IFK Internationales Fluidtechnisches Kolloquium, 31 March – 2 April 2008, Dreden (Germany)
  41. Vacca, A., Greco, M., Fornaciari, A., 2008, A Methodology for the Development of a Relief, Anti-Shock and Anti-Cavitation Cartridge Valve, 6IFK Internationales Fluidtechnisches Kolloquium, 31 March – 2 April 2008, Dreden (Germany)
  42. Vacca, A., Franzoni, G., Casoli,P., 2007, On the Analysis of Experimental Data for External Gear Machines and their Comparison with Simulation Results, IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, (WA), USA
  43. Casoli, P., Vacca, A., Berta, G.L., Meleti, S., Vescovini, M., 2007, A Numerical Model for the Simulation of Diesel/CVT Power Split Transmission, ICE2007 – 8th International Conference on Engines for Automobile, September 16-20, Capri (NA), Italy. SAE Paper 2007-24-0137
  44. Casoli, P., Vacca, A., 2007, Design Optimization of a Special Relief Valve with Response Surface Methodology, PTMC 2007, Bath Symposium on Power Transmission & Motion Control, September 12-14, 2007, Bath, UK
  45. Casoli, P., Vacca, A., Berta, G.L., 2007, Potentials of a Numerical Tool for the Simulation of Flow in External Gear Machines, SICFP07, The Tenth Scandinavian International Conference on Fluid Power, May 21-23, 2007, Tampere, Finland
  46. Vacca, A. 2006, Proposal of a Load Sensing Two-Way Valve Model, Applying “Design Of Experiments” Techniques to Simulations, IMECE2006, 2006 ASME International Mechanical Engineering Congress and Exposition, November 2006, Chicago, Illinois, USA
  47. Casoli, P., Vacca, A., Longeri, M., Berta, G.L., 2006, CFD analysis of a homogenizing valve in presence of cavitation, SIMS2006, The 47th Conference on Simulation and Modelling, 27-29 September 2006, Helsinki, Finland
  48. Casoli, P., Vacca, A., Berta, G.L., 2006, A Numerical Model for the Simulation of Flow in Hydraulic External Gear Machines, PTMC2006 Power Transmission and Motion Control, 13-15 September 2006, University of Bath (GB)
  49. Berta, G.L., Casoli,P., Vacca, A., 2006, Modellazione del funzionamento di macchine ad ingranaggi esterni (in italian), 61° Congresso Nazionale ATI. Università degli Studi di Perugia, 12-15 Settembre 2006
  50. Casoli,P., Vacca, A., Franzoni, G., 2005, A numerical model for the simulation of external gear pumps, JFPS2005, The Sixth JFPS International Symphosium on Fluid Power Tsukuba 2005, Novembre 7-10, Tsukuba, Japan
  51. Berta, G.L., Casoli,P., Vacca, A., Franzoni, G., 2005, Sviluppo di un codice di simulazione numerica del funzionamento di pompe a pistoni assiali (in italian), 60° Congresso Annuale ATI, Roma 13-15 Settembre 2005
  52. Casoli, P., Vacca, A., Franzoni, G., 2005, Simulation and Analysis of Fluid Inertia Effects in the Delivery and Inlet volume of Axial Piston Pumps, SICFP 2005, The 9th Scandinavian International Conference on Fluid Power June 1- 3, 2005 Linköping, Sweden
  53. Casoli, P., Vacca, A., Franzoni, G., Berta, G.L., 2004, Modelling of Fluid Proprieties in Hydraulic Positive Displacement Machines, SIMS 2004, The 45th Conference on Simulation and Modelling, 23-24 September 2004, Copenhagen
  54. Berta, G.L., Casoli,P., Vacca, A., Franzoni, G., 2004, Modello di simulazione di una speciale valvola limitatrice di pressione (in italian), 59° Congresso Annuale ATI, Genova 14-17 Settembre 2004
  55. Vacca, A., Franzoni, G., Casoli, P., 2004, Experimental investigation on a hydraulic special pressure control valve, 3rd Fluid Power Net International PhD Symposium, Technical University of Catalonia, Terrassa – Spain, 30th June – 2nd July 2004
  56. Franzoni, G., Vacca, A., Casoli, P., 2004, A numerical model for the simulation of a special poppet valve, 3rd Fluid Power Net International PhD Symposium, Technical University of Catalonia, Terrassa – Spain, 30th June – 2nd July 2004
  57. Göttlich, E., Innocenti, L., Vacca, A., Sanz, W., Woisetschläger, J., Facchini, B., Jericha, H., Rossi, E., 2004, Measurement and simulation of a Transonic Innovative Cooling System (ICS) for High-Temperature Transonic Gas Turbine Stages, ASME Turbo Expo 2004 Power for Land, Sea, and Air, June 14–17, 2004, Vienna, Austria
  58. Casoli, P., Vacca, A., Franzoni, G., 2004, Analisi Sperimentale di una Speciale Valvola Limitatrice di Pressione (in italian), MIS-MAC-VIII, Metodi di Sperimentazione nelle Macchine, 28 Maggio 2004
  59. Casoli, P., Vacca, A., Franzoni, G., 2003, A numerical model for simulation of “load sensing” spool valves, The 18th International Conference on Hydraulics and Pneumatics, Prague, Czech Republic, September 30 – October 1, 2003
  60. Casoli, P., Vacca, A., Berta, G.L., 2003, Analisi numerica e sperimentale di un sistema di iniezione per piccoli motori Diesel (in italian), “58° Congresso Annuale ATI”, Padova - S.Martino di Castrozza (TN), 8-12 Settembre 2003
  61. Casoli, P., Vacca, A., Franzoni, G., Berta, G.L., 2003, Un modello per la simulazione del funzionamento di valvole prioritarie “load sensing”(in italian), “58° Congresso Annuale ATI”, Padova - S.Martino di Castrozza (TN), 8-12 Settembre 2003
  62. Casoli,P., Vacca, A., 2003, Modelling of an Axial Piston Pump for Pressure Ripple Analysis, SICFP03 The Eighth Scandinavian Conference on Fluid Power”, 7-9 May, 2003, Tampere, Finland
  63. Berta, G.L., Casoli,P., Vacca, A., Guidetti, M., 2002, Simulation Model of an Axial Piston Pumps Inclusive of Cavitation, IMECE2002, 2002 ASME International Mechanical Engineering Congress and Exposition, 17-22 November 2002, New Orleans LA USA
  64. Carcasci, C., Facchini, B., Innocenti, L., Vacca, A., Zecchi, S., 2002, An integrated design procedure for gas turbine cooled vanes and blades, Heat Tranfer in Aeroengines, Join ATI-SFT Conference, October 24/25 2002, Modane-Avrieux, France
  65. Facchini, B., Migliorini, G., Vacca, A., Toderi, G., Arnone, L., Marcacci, M., 2001, Air cooling system for small internal combustion engine experimental analysis, ATA – SAE - Small Engine Technology Conference and exhibition, Pisa, 28-29-30 November 2001
  66. Berta, G.L., Casoli,P., Vacca, A., 2001, Staged fuel injection with in-line pumps: simulation and experiments, ATA - SAE - Small Engine Technology Conference and exhibition, Pisa, 28-29-30 November 2001

    67. Other Publications

  67. Vacca A., Casoli P., Vassena A., 2008, Optimization of the design of a modified external gear pump, ModeFrontier Users’ Meeting 2008, 14-15 October 2008, Stazione Marittima, Trieste, Italy
  68. Vacca A., 2008, IFK2008 Potenza Fluida in Movimento, Oleodinamica-Pneumatica – Tecniche Nuove, Milano. October 2008
  69. Vacca A., 2008, PTMC 2007 Il panorama Internazionale della Potenza Fluida, Oleodinamica-Pneumatica – Tecniche Nuove, Milano. n. 2 Febbraio 2008

© 2013 Maha Fluid Power Research Center | All Rights Reserved.