|
|
Home
About
Contact
Projects
Facilities
People
Participating
Companies
News
Publications
Internship
Workshop
Members
Only
|
|
|
Laser Welding and Welding
- Zhang, B., Hong, K.M., and Shin, Y.C.,
"Deep-Learning-Based Porosity Monitoring of Laser Welding Process",
Manufacturing Letters, Volume 23, January 2020, Pages 62-66.
https://doi.org/10.1016/j.mfglet.2020.01.001
- Bailey, N., Hong, K.M. and Shin, Y.C.,
"Comparative Assessment of Dendrite Growth and Microstructure
Predictions during Laser Welding of Al 6061 via 2D and 3D Phase Field
Models", Computational Material Science. Vol. 172, 109291, 2020.
https://doi.org/10.1016/j.commatsci.2019.109291
- Xu, H., Guo, X., Lei, Y., Fu, H.,
Xiao, R., Huang, T. and Shin, Y.C., "Welding Deformation of Ultra-Thin
316 Stainless Steel Plate Using Pulsed Laser Welding Process", Optics
and Laser Technology, Volume 119, November 2019, 105583.
https://doi.org/10.1016/j.optlastec.2019.105583
- Inamke, G., Pellone, L., Ning, J. and
Shin, Y.C., "Enhancement of Weld Strength of Laser Welded Joints of
AA6061-T6 and TZM Alloys via Novel Dual-Laser Warm Laser Shock Peening",
International Journal of Advanced Manufacturing Technology, September
2019, Volume 104, Issue 1-4, pp 907-919.
http://dx.doi.org/10.1007/s00170-019-03868-y
- Pellone, L.,
Inamke, G., Hong, K.M. and Shin, Y.C., "The
Effects of Interface Gap and Shielding Gas on the Welding Quality During
Fiber Laser Lap Welding of AA6061-T6", Journal of Materials
Processing Technology. Volume 268, June 2019, Pages 201-212
https://doi.org/10.1016/j.jmatprotec.2019.01.025
- Ning, J., Hong, K.M.,
Inamke, G., Shin, Y.C., Zhang, L. "Analysis
of Microstructure and Mechanical Strength of Lap Joints of TZM Alloy
Welded by a Fiber Laser", Journal of Manufacturing Processes.
Volume 39, March 2019, Pages 146-159.
https://doi.org/10.1016/j.jmapro.2019.02.015.
- Ai, Y., Zheng, K., Shin, Y.C., Wu, B.
"Analysis of Weld Geometry and Liquid Flow in Laser Transmission Welding
Between PET and Ti6Al4V Based on Numerical Simulation", Laser and
Optics Technology, Volume 103, July 2018, Pages 99-108.
10.1016/j.optlastec.2018.01.022
- Ajri, A. and Shin, Y.C.,
"Investigation on the Effects of Process Parameters on Defect Formation
in Friction Stir Welded Samples via Predictive Numerical Modeling and
Experiments", Trans. of the ASME, Journal of Manufacturing Science and
Engineering. 139(11), 111009, 2017.
https://doi.org/10.1115/1.4037240
- Hong, K.M. and Shin, Y.C.,
"Investigation on Weld Pool Dynamics in Laser Welding of AISI 304
Stainless Steel with An Interface Gap via A Three-Dimensional Dynamic
Model And Experiments", Trans. of the ASME, Journal of Manufacturing
Science and Engineering, 2017;139(8):081008-081008-10. doi:10.1115/1.4036521.
- Hong, K.M. and Shin, Y.C., "Prospects of
Laser Welding Technology in the Automotive Industry: A Review",
Journal of Materials Processing Technology, Volume 245, July 2017,
Pages 46-69. DOI:
http://dx.doi.org/10.1016/j.jmatprotec.2017.02.008
- Hong, K.M. and Shin, Y.C., "The
Effects of Interface Gap on Weld Strength During Overlapping Fiber Laser
Welding of AISI 304 Stainless Steel and AZ31 Magnesium Alloys",
International Journal of Advanced Manufacturing Technology,
June 2017,
Volume 90, Issue 9,
pp 3685-3696.
http://link.springer.com/article/10.1007/s00170-016-9681-2
- Ngo, P.D. and Shin, Y.C., "Modeling
and Robust Controlling of Laser Welding Process on High Strength
Titanium Alloy Using Fuzzy Basis Function Networks and Robust Takagi
Sugeno Fuzzy Controller", International
Journal of Advanced Manufacturing Technology,
89(1), 1089-1102, 2017.
DOI:10.1007/s00170-016-9104-4
- Hong, K.M. and Shin, Y.C., "Analysis
of Microstructure and Mechanical Properties Change in Laser Welding of
Ti6Al4V with A Multiphysics Prediction Model", Journal of Materials
Processing and Technology,
Volume 237, November 2016, Pages 420-429.
doi:10.1016/j.jmatprotec.2016.06.034
- Luo, M. and Shin, Y.C., "Estimation of
Keyhole Geometry and Prediction of Welding Defects Based on a Visual
System and a Radial Basis Function Neural Network", International
Journal of Advanced Manufacturing Technology, in press.
DOI: 10.1007/s00170-015-7079-1
- Tan, W. and Shin, Y.C., "Laser Keyhole
Welding of Stainless Steel Thin Plate Stack towards Applications in Fuel
Cell Manufacturing", Science and Technology of Welding and Joining,
2015, Vol. 20, No. 4, 2015, pp. 313-318.
http://dx.doi.org/10.1179/1362171815Y.0000000005
- Bailey, N., Tan, W. and Shin, Y.C., "A
Parametric Study on Laser Welding of Magnesium Alloy AZ31 by A Fiber
Laser", Trans. of the ASME, Journal of Manufacturing Science and
Engineering,
137, 041003, 2015. doi:10.1115/1.4029052
- Tan, W. and Shin, Y.C., "Multi-scale
Modeling of Solidification and Microstructure Development in Laser
Keyhole Welding Process for Austenitic Stainless Steel", Computational
Material Science, Volume 98, 15 February 2015, Pages 446-458.
Doi:10.1016/j.commatsci.2014.10.063
- Luo, M. and Shin, Y.C., "Vision-based
Weld Pool Boundary Extraction and Width Measurement during Keyhole Fiber
Laser Welding", Optics and Lasers in Engineering, Volume 64, January 2015, Pages 59-70.
Doi: 10.1016/j.optlaseng.2014.07.004
- Tan, W. and Shin, Y.C., "Analysis of
Multi-Phase Interaction and Its Effect on Keyhole Dynamics with A
Multi-Physics Numerical Model" Journal of Physics, Applied Physics D,
47 (2014) 345501.
doi:10.1088/0022-3727/47/34/345501
- Tan, W., Bailey, N. and Shin, Y.C.,
"Investigation of Keyhole Plume and Molten Pool Based on
A Three-Dimensional Dynamic Model with Sharp
Interface Formulation", Journal of Physics D: Applied Physics,
Volume 46, Number 5, 6 February 2013, 055501.
doi:10.1088/0022-3727/46/5/055501
- Tan, W., Bailey, N. and Shin, Y.C.,
"Numerical Modeling of Transport and Dendritic Growth in Laser
Conduction Welding of 304 Stainless Steel", Trans. of the ASME,
Journal of Manufacturing Science and Engineering, 134, 041010
(2012). http://dx.doi.org/10.1115/1.4007101
- Tan, W., Bailey, N. and Shin, Y.C., "A
Novel Integrated Model Combining Cellular Automata and Phase Field
Methods for Microstructure Evolution during Solidification of
Multi-Component and Multi-Phase Alloys", Computational Materials
Science. Vol. 50, Issue 9, July 2011, Pages 2573-2585
doi:10.1016/j.commatsci.2011.03.044
|
|