Publications (in Archived Journals)
	Home About Contact Projects Facilities People Participating Companies News Publications Internship Workshop Members Only			Laser-assisted Machining Dong, X. and Shin, Y.C., "Improved Machinability of SiC/SiC Ceramic Matrix Composite via Laser-assisted Micromachining", International Journal of Advanced Manufacturing Technology, April 2017, Volume 90, Issue 1, pp 731-739.  DOI: 10.1007/s00170-016-9415-5 Dong, X. and Shin, Y.C., "Multi-scale Genome Modeling for Predicting the Thermal Conductivity of Silicon Carbide Ceramics", Journal of American Ceramic Society, 99 (12), 4073-4082, 2016.  http://onlinelibrary.wiley.com/doi/10.1111/jace.14458/full Dong, X. and Shin, Y.C., "Multi-scale Modeling of Alumina Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, 138(1), 011004, 2016. doi:10.1115/1.4029858 Hedberg, G. and Shin, Y.C., "Laser Assisted Milling of Ti-6Al-4V ELI with the Analysis of Surface Integrity and Its Economics", Lasers in Manufacturing and Materials Processing, Vol.2, Issue 3, pp. 164-185, 2015.  DOI: 10.1007/s40516-015-0013-4 Hedberg, G., Shin, Y.C. and Xu, L., "Laser-assisted Milling of Ti-6Al-4V with the Consideration of Surface Integrity", International Journal of Advanced Manufacturing Technology, August 2015, Volume 79, Issue 9-12, pp 1645-1658.  DOI 10.1007/s00170-015-6942-4 Dong, X. and Shin, Y.C., "Coupled Thermo-mechanical Multi-scale Modeling of Alumina to Predict Thermally Induced Fractures under Laser Heating", Journal of the American Ceramic Society, Volume 98, Issue 3, pages 920-928, March 2015.  Doi:10.1111/jace.13349 Dandekar, C.R. and Shin, Y.C., "Multi-scale Modeling of Subsurface Damage in Laser-assisted Machining of Particulate Reinforced Metal Matrix Composite", Journal of Materials Processing Technology, Vol. 213, Issue 2, February 2013, Pages 153-160. http://dx.doi.org/10.1016/j.jmatprotec.2012.09.010 Dandekar, C.R. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Machining of Silicon Carbide Particle Reinforced Aluminum Matrix Composites", International Journal of Advanced Manufacturing Technology, Volume 66, Issue 9 (2013), Page 1603-1610.. DOI: 10.1007/s00170-012-4443-2 Ding, H. and Shin, Y.C., "Improvement of Machinability of Waspaloy via Laser-assisted Machining", International Journal of Advance Manufacturing Technology, 2013, 17:2, 246-269. DOI: 10.1007/s00170-012-4012-8 Ding, H., Shen, N. and Shin, Y.C., "Thermal and Mechanical Modeling Analysis of Laser-assisted Micro Milling of Difficult-to-machine Alloys", Journal of Materials Processing Technology, Volume 212, Issue 3, March 2012, Pages 601-613. doi:10.1016/j.jmatprotec.2011.07.016 Dandekar, C. and Shin, Y.C., "Laser-Assisted Machining of a Fiber Reinforced Al-2%Cu Metal Matrix Composite", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 6, 061004, 2010. doi:10.1115/1.4002548 Shelton, J.A. and Shin, Y.C., "Laser-Assisted Micro-Milling of Difficult-to-machine Materials in a Side Cutting Configuration", Journal of Micromechanics and Microengineering, Vol. 20, 075012, 2010. doi: 10.1088/0960-1317/20/7/075012 Shelton, J.A. and Shin, Y.C., "Experimental Evaluation of Laser-Assisted Micro-Milling in a Slotting Configuration", Trans. of the ASME, J. of Manuf. Science and Engineering, Volume 132, Issue 2, 021008, April 2010. http://dx.doi.org/10.1115/1.4001142 Dandekar, C. and Shin, Y.C., "Machinability Improvement of Ti6Al4V Alloy via LAM and Hybrid Machining", International Journal of Machine Tools and Manufacture, iVolume 50, Issue 2, pp. 174-182, February 2010.  doi:10.1016/j.ijmachtools.2009.10.013 Ding, H. and Shin, Y.C., "Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis", in press, International Journal of Machine Tools and Manufacture, Volume 50, Issue 1, Pages 106-114, January 2010. doi:10.1016/j.ijmachtools.2009.09.001    Tian, Y., Wu, B.X. and Shin, Y.C., "Laser-assisted Milling of Silicon Nitride and Inconel 718", Trans. of the ASME, J. of Manufacturing Science and Engineering, Vol. 130, 031013, June, 2008. Tian, Y. and Shin, Y.C., "Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-assisted Machining", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 129, No. 2, pp. 287-295, 2007. Anderson, M. and Shin, Y.C., "Laser-assisted Machining of P550 with an Economic Analysis", Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, Vol. 220, No. 12, pp. 2055-2067, 2006. Tian, Y. and Shin, Y.C., "Laser-assisted Machining of Silicon Nitride with Complex Geometric Features via In-process Control", Journal of the American Ceramic Society, Vol. 89, issue 11, pp. 3397-3405, 2006. Anderson, M., Patwa, R. and Shin, Y.C., "Laser-assisted Machining of Inconel 718 with an Economic Analysis", International Journal of Machine Tools and Manufacture, 46, pp. 1879-1891, Nov. 2006. Skvarenina, S. and Shin, Y.C., "Laser-assisted machining of Compacted Graphite Iron with Microstructural Analysis", International Journal of Machine Tools and Manufacture, Vol. 46, 7-17, 2006. Tian, Y. and Shin, Y.C., "Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features", Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 128, pp. 425-434, May 2006. Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining", International Journal of Heat and Mass Transfer, Volume 48, Issue 10, pp. 1999-2012, May 2005. Rebro, P.A., Shin, Y.C. and Incropera, F.P., "Design of Operating Conditions for Crackfree Laser-assisted Machining of Mullite", International Journal of Machine Tools and Manufacture, Vol. 44, pp. 677-694, 2004. Pfefferkorn, F.E., Shin, Y.C., Incropera, F.P. and Tian, Y., "Laser-Assisted Machining of Partially Stabilized Zirconia", Transactions Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 126, No. 1, pp. 42-51, Feb. 2004. Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry", Transactions of the ASME, Journal of Heat Transfer, Vol. 125, No.1, pp. 48-56, Feb. 2003. Rebro, P., Shin, Y.C. and Incropera, F.P., "Laser Assisted Machining of Reaction Sintered Mullite Ceramics", Transactions of the ASME, Journal of Manufacturing Science and Engineering, Vol. 124, pp. 875-885, Nov. 2002. Rebro, P.A., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., "Comparative Assessment of Laser-assisted Machining for Various Ceramics", Transactions of North American Manufacturing Research Institution, Vol. 30, pp. 153-160, May 2002. Lei, S., Shin, Y.C. and Incropera, F.P., 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics," Transactions of the ASME, Journal of Manufacturing Science and Engineering, Vol. 123, pp. 639-646, November 2001. Leshock, C.E., Kim, J.N., and Shin, Y.C., 2001, "Plasma Enhanced Machining of Inconel 718: Modeling of Workpiece Temperature with Plasma Heating and Experimental Results," International Journal of Machine Tools and Manufacture, 41/6, pp. 877-891, March 2001. Rozzi, J.C., Pfefferkorn, F.E., Shin, Y.C. and Incropera, F.P., 2000, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," Trans. of the ASME, Journal of Manufacturing Science and Engineering, Vol. 122, pp. 666-670. Lei, S., Shin, Y.C. and Incropera, F.P., 2000, "Deformation Mechanisms and Constitutive Modeling for Silicon Nitride Undergoing Laser Assisted Machining," International Journal of Machine Tools and Manufacture, Vol. 40, No. 15, pp. 2213-2233. Shin, Y.C., Lei, S., Pfefferkorn, F.E., Rebro, P. Rozzi, J.C. and Incropera, F.P., 2000, "Laser Assisted Machining: Its Potential and Future," Abrasive Magazine, April/May, pp. 16-30 and also published in Machining Technology, featured article, Vol. 11, No. 3, pp. 1-7, Third quarter. Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: II-Assessment of Parametric Effects," International Journal of Heat and Mass Transfer, vol. 43, pp. 1425-1437. Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: I-Comparison of Predictions with Measured Surface Temperature Histories," International Journal of Heat and Mass Transfer, vol. 43, pp. 1409-1424. Lei, S., Shin, Y. C. and Incropera, F. P., 1999, "Material Constitutive Modeling under High Strain Rates and Temperatures through Orthogonal Machining Tests," Trans. of the ASME, Journal of Manufacturing Sciences and Engineering, Vol. 121, pp. 577-585. Lei, S., Shin, Y. C. and Incropera, F. P., 1999, "Thermo-Mechanical Modeling of Orthogonal Machining Process by Finite Element Analysis," International Journal of Machine Tools and Manufacture, Vol. 39, pp. 731-750. Abstract Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P. and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: I-Comparison of Surface Temperature Measurements with Theoretical Results," Trans. of the ASME, Journal of Heat Transfer, Vol. 120, pp. 899-906. Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: II-Parametric Effects and Assessment of a Simplified Model," Trans. of the ASME, Journal of Heat Transfer, Vol. 120, pp. 907-915. Pfefferkorn, F. E., Rozzi, J. C., Incropera, F. P. and Shin, Y. C., 1997, "Surface Temperature Measurement in Laser-Assisted Machining Processes," Experimental Heat Transfer, Vol. 10, pp. 291-313. Abstract Novak, J. W., Shin, Y. C. and Incropera, F. P., 1997, "Assessment of Plasma Enhanced Machining for Improved Machinability of Inconel 718," Trans. of the ASME, Journal of Manufacturing Science & Engineering, Vol. 119, pp. 125-129.