Skip navigation

People

Current lab members

Dr Yuri Efremov, postdoctoral researcher

 

 

 

 

 

 

 

Topic: Living cell nanomechanics probed with AFM and confocal microscopy

Education: 

PhD in Biophysics, Moscow State University, 2014

M.Sc. in Biophysics, Moscow State University, 2014

Articles:

Yu.M. Efremov, W.-H. Wang, S.D. Hardy, R.L. Geahlen, A. Raman Measuring nanoscale viscoelastic parameters of cells directly from AFM force-displacement curve // Scientific Reports 7, 1541. doi:10.1038/s41598-017-01784-3 – 2017.
Yu.M. Efremov, D.V. Bagrov, M.P. Kirpichnikov, K.V. Shaitan Application of the Johnson-Kendall-Roberts model in AFM-based mechanical measurements on cells and gel // Colloids and Surfaces B: Biointerfaces, V. 134, p. 131-139. – 2015.
Yu.M. Efremov, A.A. Dokrunova, A.V. Efremenko, M.P. Kirpichnikov, K.V. Shaitan, O.S. Sokolova Distinct impact of targeted actin cytoskeleton reorganization on mechanical properties of normal and malignant cells // Biochimica et Biophysica Acta (BBA) - Molecular Cell Research, V. 1853 (11), p. 3117-3125. – 2015.
Yu.M. Efremov, M.E. Lomakina, D.V. Bagrov, P.I. Makhnovskiy, A.Y. Alexandrova, M.P. Kirpichnikov, K.V. Shaitan Mechanical properties of fibroblasts depend on level of cancer transformation // Biochimica et Biophysica Acta (BBA) - Molecular Cell Research V. 1843 (5), p. 1013-1019. – 2014.
Yu.M. Efremov, A.A. Dokrunova, D.V. Bagrov, K.S. Kudryashova, O.S. Sokolova, K.V. Shaitan The effects of confluency on cell mechanical properties // Journal of Biomechanics, V. 46, p. 1081-1087. – 2013. ​

 

 

Maria Jose Cadena, PhD Candidate

 

 

 

 

 

 

 

Topic: 3D subsurface nanoscale imaging and reconstruction using dynamic atomic force microscopy

Education: 

Ph.D. Mechanical Engineering, Purdue University, US (2013 - present)

M.Sc. Engineering: Electronic Engineering and Computers, University of Los Andes, Colombia (2013)

B.Sc. Electronic Engineering, University of Nariño, Colombia (2010)

Awards:

2017 Rising Stars awardee at Stanford University

2014 Best Poster Award at the Seeing at the Nanoscale at Northwestern University

Articles:

Cadena, M. J., Chen, Y., Reifenberger, R. G., Raman, A. Sub-surface AFM imaging using tip generated stress and electric fields. Appl. Phys. Lett. 2017, 110, 123108.

Cadena, M. J., Parker, J. C., Raman, A., Reifenberger, R. G. Fabrication and characterization of mesopores in a silica gel matrix. Mater. Res. Innov. 2017, 15.

Cadena, M. J., Sung, S. H., Boudouris, B. W., Reifenberger, R., Raman, A. Nanoscale mapping of dielectric properties of nanomaterials from kilohertz to megahertz using ultrasmall cantilevers. ACS Nano 2016, 10, 40624071.

Cadena, M. J., Misiego, R., Smith, K. C., Avila, A., Pipes, B.; Reifenberger, R., Raman, A. Sub-surface imaging of carbon nanotube polymer composites using dynamic AFM Methods. Nanotechnology 2013, 24, 135706.

Cadena, M. J., Reifenberger, R. Allebach, J. P., Raman, A. Atomic force microscopy characterization of printed dots. 31st International Conference on Digital Printing Technologies, 2015, 1, pp.109-114.

 

Denise Cruise, PhD Candidate

Topic: Quantitative analyses of human balance (co-advised by Dr. S. Rietdyk, Health and Kinesiology)

Education:

BS, Biomedical Engineering, Purdue University, May 2011

MS, Mechanical Engineering, Purdue University, August 2014

Articles:

Cruise, Denise R., et al. "An active balance board system with real-time control of stiffness and time-delay to assess mechanisms of postural stability." Journal of Biomechanics 60 (2017): 48-56.

Cruise, Denise R., James R. Chagdes, and Arvind Raman. "Dynamics of Upright Posture on an Active Balance Board With Tunable Time-Delay and Stiffness." ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016.

 

Dan Feng, PhD Student

 

 

 

 

 

 

 

 

 

Topic: Thermo-mechanics and vibrations of moving webs in roll-to-roll flexible electronics- and nano-manufacturing

Education:

M.S., Mechanical Engineering, University of Missouri, Columbia, MO             Dec. 2012

B.E., Machine Design, Manufacturing, and Automation, Huazhong University of Science & Technology, Wuhan, Hubei, China                 Jun. 2009

Articles:

Dan Feng and Arvind Raman. "Thermomechanics of axially moving webs in roll-to-roll processes." International Journal of heat and mass transfer, submitted

P. Frank Pai, Dan Feng, and Ye Duan. "High-Fidelity Camera-based Method for Noncontact Vibration Testing of Structures." In 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, p. 1898. 2013. https://arc.aiaa.org/doi/abs/10.2514/6.2013-1898

 

Bahram Rajabifar, PhD Student

 

 

 

 

 

 

 

Topic: Nanomechanics of AFM tips on polymer surfaces

Education:

Master of Science, Mechanical Engineering, 2012-2015

University of Missouri, Columbia, Missouri                                                                                            GPA: 3.90

Thesis: Novel techniques to growth, modify, and characterize carbon nanotube (CNT) forests.

Using NEPCM slurry and Nanofluid coolants to enhance the efficiency of electronic cooling systems.

Bachelor of Science, Mechanical Engineering, 2000–2004  

Isfahan University of Technology, Isfahan, Iran.

Thesis: Modal and mechanical study on a rotor using ANSYS software.

Articles:

B. Rajabifar, J. Jadhav, D. Kiracofe, G. F. Meyers, A. Raman, “Dynamic AFM on Viscoelastic Polymer Samples with Surface Forces - A Computational Approach”, Langmuir, 2017, under review.                    

Effects of pin tip-clearance on the performance of an enhanced microchannel heat sink with oblique fins and phase change material slurry, BR Far, SK Mohammadian, SK Khanna, Y Zhang, International Journal of Heat and Mass Transfer 83, 136-145, 2015

Enhancement of the performance of a double layered microchannel heatsink using PCM slurry and nanofluid coolants, B Rajabifar, International Journal of Heat and Mass Transfer 88, 627-635, 2015

Flow and heat transfer in micro pin fin heat sinks with nano-encapsulated phase change materials, B Rajabifar, HR Seyf, Y Zhang, SK Khanna, Journal of Heat Transfer 138 (6), 062401, 2015

Three-dimensional machining of carbon nanotube forests using water-assisted scanning electron microscope processing, B Rajabifar, S Kim, K Slinker, GJ Ehlert, AJ Hart, MR Maschmann, Applied Physics Letters 107 (14), 143102, 2015

New approaches to optimize strain behavior of Al6082 during equal channel angular pressing, M Ebrahimi, B Rajabifar, F Djavanroodi, The Journal of Strain Analysis for Engineering Design 48 (6), 395-404.

Fatigue design factors for ECAPed materials, F Djavanroodi, M Ebrahimi, B Rajabifar, S Akramizadeh, Materials Science and Engineering: A 528 (2), 745-750, 2010.      

 

Devin Kalafut, PhD Student

Topic: Multi-stability and uncertainty in MEMS switches (co-advised by Dr. A. Bajaj)

Education: 

Bachelor of Mechanical Engineering, Auburn University (Auburn, AL)

Awards: 

NSF graduate research fellow

Articles:

Kalafut, D., Bajaj, A., & Raman, A. (2017). Multistability of cantilever MEMS/NEMS switches induced by electrostatic and surface forces. International Journal of Non-Linear Mechanics, 95, 209–215. link

 

Lab alumni

Doctoral students supervised

  1. Nurul Huda Shaik, PhD 2017, New multi-harmonic techniques for sensing tip-sample interactions and nanomechanical material property mapping in dynamic atomic force microscscopy.
  2. Alexander Cartagena, PhD 2014, New dynamic AFM modes for highly sensitive biomechanical assays and molecular recognition on biological samples in liquids, Postdoctoral fellow at NIH.
  3. Ryan Wagner, PhD 2014, Advanced atomic force microscopy techniques for characterizing the properties of cellulosic nanomaterials, currently NRC postdoctoral fellow at NIST Gaithersberg.
  4. James Chagdes, PhD, 2012,  Nonlinear dynamics in human postural control, Assistant Professor at Miami University, Ohio.
  5. Ryan Tung, PhD, 2012, Nonlinear dynamics and Fluid structure interactions in microsystems, Assistant Professor at University of Nevada, Reno.
  6. Daniel Kiracofe, PhD, 2012, Graduate School doctoral fellow, Nonlinear dynamics in liquid environment atomic force microscopy, GE Aviation.
  7. John Melcher, PhD, 2011, Nonlinear dynamics in atomic force microscopy, Applied Physics Lab, Johns Hopkins University.
  8. Gyan Prakash, PhD, 2010 (co-advised with Prof Reifenberger), Parametric resonance based atomic force microscopy and mass-sensing in ambient and liquid environments, Intel Corp.
  9. Mark Strus, PhD, 2009, Carbon nanotube mechanics in scanning probe microscopy, NRC research fellow, NRC postdoc fellow at NIST Boulder, currently at SEAKR Engineering, Denver.
  10.  William G. Conley, PhD, 2009, Nonlinear dynamics in nanomechanical systems, Staff Scientist at Navsea-Crane, Indiana, currently at Office of Undersecretary of Defense.
  11. Xin Xu, PhD, 2009,  Dynamic atomic force microscopy in liquids and applications to biological samples, Postdoc at University of Colorado, Boulder.
  12. Rahul Bidkar, PhD, 2008, Flow-structure interactions in flexible structures,  GE research.
  13. Matthew G. Spletzer, PhD, 2008, New paradigms in microcantilever based sensors, Staff engineer, Sandia national Labs.
  14. Anirban Jana, PhD, 2008, Aeroelastic flutter and fluid-structure interactions in rotating and stationary vibrating disks, Senior Scientist, Pittsburgh Supercomputing Center, PA.
  15. Shuiqing Hu, PhD, 2007, Nonlinear dynamics and force spectroscopy in dynamic atomic force microscopy, Bruker Scanning Probe Microscopy Division, Santa Barbara, CA.
  16. Ashwin Vyas, PhD, 2007, (co-advised with Profs Bajaj and Peroulis), Microresonator designs based on nonlinear 1:2 internal resonance between flexural-flexural and torsional-flexural structural modes, Cummins Inc.
  17.  Sudipta Basak, PhD, 2007, Dynamics of oscillating microcantilevers in viscous fluids, Tasnix Corp, Australia.
  18. Nam-Cheol Kang, PhD, 2004,  Aeroelastic stability of enclosed high speed rotating disks, Professor, Department of Mechanical Engineering, Kyungpoon National University, S. Korea.

 

MS students supervised

  1. Denise Hickman, MSME, 2014,  Balance platforms for studying human postural bifurcations.
  2. Leyla Yamin, MSME, 2013, Exploiting cantilever dynamics signatures for mapping local material properties of live cells using AFM.
  3. Hank Thompson, MSME, 2013, Nanomechanics of carbon nanotube and graphene interactions with polymers.
  4. Ryan Tung, MSME, 2008, Flow-structure interactions of microcantilevers in viscous fluids.
  5. Trevor Slack, MSME, 2005, Mathematical modeling and simulation of flexible media in web handling systems.
  6. Mauritz DeRidder, MSME, 2005, Virus capsid mechanics (non-thesis).
  7. Lawrence Bradley Sharos, MSME, 2004, High sensitivity mass detection using modal coupling phenomena in microcantilever and carbon nanotube resonators.
  8.  Sydney Wait, MSME, 2004 (with Prof. Garimella), Ultrasonic piezoelectric fans.
  9. Sudipta Basak, MSME, 2003 (with Prof. Garimella), Mathematical modeling and optimization of the dynamics of piezoelectric fans and resonators.
  10.  Merrill Vaughan, MSME, 2003, Aeroelastic stability of axially moving webs coupled to incompressible flows.
  11. Tolga Acikalin, MSME, 2002 (with Prof. Garimella), Thermo-fluid mechanics of piezoelectric fans.
  12.  Ashwin Vyas, MSME, 2001 (with Prof. Bajaj), Investigations into wideband autoparametric vibration absorbers for flexible structures.
  13. Philipp Bürmann, MSME, 2001, Modeling and analysis of resonant piezoelectric fans (non-thesis).
  14. Mike Tiller, MSME, 2000, (with Prof. Krousgrill), Vibrations and eigenvalue veering phenomena of coupled circular plates with applications to ultrasonic motor design (non-thesis).

 

Postdoctoral fellows supervised (six)

  1. Dr. Yuri Efremov, 2015 onwards.
  2. Dr. Jim Chagdes, 2013-2015, Assistant Professor at Miami University, Ohio.
  3. Dr. Xin Xu, 2011-onwards, AFM applications in composites and Microsystems.
  4. Dr. Jin Woo Lee, 2007-2009, currently Assistant Professor in Ajou University, S.  Korea, Fluid structure interactions in MEMS.
  5. Dr. Nam-Cheol Kang,  2006, PhD Purdue University, currently Professor,  Kyungpoon National University, S. Korea, Mechanics and vibrations in web handling systems.
  6. Dr. Richard Zhang, 2004, PhD Purdue University, (co-advised with Prof. T. Fisher), currently at GE Research, Nanothermomechanics.
  7. Dr. Soo-Il Lee, 2001-2003, currently Professor, University of Seoul, S. Korea, Nonlinear dynamics and vibrations of microcantilevers in MEMS and scanning probe microscopy.

 

Visiting scholars supervised

  1. Prof. Yuhang Chen, University of Science and Technology of China, 2016, AFM subsurface imaging of nanocomposites using electric ans stress fields.
  2. Prof. Mauricio Giraldo, NEXUS-Fulbright scholar, Head of Mechanical Engineering, Universidad Pontificia Bolivariana, Medellín, Colombia, 2013, Nanofluidics of ion filtration in mangrove roots.
  3. Juan Vasquez Cifuentes, PhD student, Universidad Pontificia Bolivariana, Medellin, Colombia, Jan –Aug, 2013, Gas damping of microcantilevers with slip.
  4. Alejandro Castañeda, PhD student, Department of Electronic Engineering, Universidad de los Andes, Bogotá, Colombia, 2013, Multi-frequency electrical AFM methods for nanocomposites characterization.
  5. Mercedes Hernando-Pérez, PhD student, Condensed Matter Physics, Universidad Autónoma de Madrid, Spain, spring 2011, 2012, 2013, Dynamic AFM methods for mapping physical properties of viruses.
  6. Maria Jose Cadena, MS student, Department of Electronic Engineering, Universidad de los Andes, Bogotá, Colombia, Feb-Aug 2012, Multi-frequency electrical AFM methods for nanocomposites characterization.
  7. Oliver Peyton, PhD student, University of Bristol, 2011, Laser vibrometry studies of cantilever dynamics in high-speed AFM.
  8. Juan Camilo Muñera,      MS student, Universidad EAFIT, Medellín, Colombia, March, 2012, Dynamic AFM studies of bitumen.
  9. Prof. Changsoo Han, Korean Institute of Machinery and Materials, 2003-2004, Carbon nanotube probe fabrication and mechanics.
  10. Hyungwoo Lee, KAIST, Korea, 2003-2004, Carbon nanotube probe fabrication and mechanics.
  11. Prof. Jong-Gil Lee, Andong University, Korea, 2003-2004, Vibrations of carbon nanotube resonators.
  12. Jin-Woo Lee, Seoul National University, Korea, 2001, Acoustic structure interaction in hard disk drives.
  13.  Sebastian Rützel, Darmstadt University of Technology, Germany, 2000/2001, Dynamic response of atomic force microscopes in high-speed scanning applications.

 

Undergraduate researchers supervised

  1. Matt Stienstra, 2012, ME 497 student, Vibrations of nanowires.
  2. Tridib Saha, SURF student, 2011, New control strategies for high speed AFM scanning.
  3. Steven Johnson, 2007, ME 497 student, Shape optimization of AFM microcantilevers for operation in liquids.
  4. Melanie Kemerling, 2007, ME 497 student, Cantilever biosensors using stem cells.
  5.  Jin Xin, Spring intern, 2007, Purdue GEARE program, Electronics for energy harvesting.
  6. Juliann Henderlong, 2006, NASA- Microgravity University project, Microcantilever sensors under microgravity conditions.
  7. Luis Moreno, 2006,  NASA- Microgravity University project, Microcantilever sensors under microgravity conditions.
  8. Kedar Hippalgaonkar, 2006, Honor’s thesis, Wavelet transformed dynamic Atomic Force Microscopy.
  9. John Melcher, 2006, Honor’s thesis, Point mass models of continuous atomic force microscopy probes.
  10. Bill Conley, 2002, Honor’s thesis, Nonlinear dynamics in atomic scale friction.
  11. Spencer Patterson, 2002,  ME 497 student, Design of a web handling test system.