Purdue Engineering Professional Education

logo header header
Toll-Free in U.S. (877) 598-4233
     Print
ME55600 - Lubrication, Friction and Wear

Spring 2016

Days/Time: TTh / TBA
Credit Hours: 3

Learning Objective:
Not available

Description:
Science, technology, and application of lubricated interacting surfaces in relative motion. Advanced analysis techniques and hands-on exposure to modern experimental methods provide an enhanced understanding of fundamental principles of lubrication, friction, and wear. Basics of design and analysis of machine components operating in the presence of air and liquid lubricants. Rolling fatigue, friction and wear models, and measurement techniques. Offered in alternate years.

Topics Covered:
Introduction - History of Lubrication, Friction and Wear, Definition of conformal and non-Conformal Contacts, Regimes of Lubrication; Lubricants, Newtonian, non-Newtonian, Units, Grades, Pressure and Temperature Dependence, Surface Measurement Techniques (Contacting & non-Contacting); Surface Parameters of Interest, Bearing Materials;Viscous Flow, Petrov's law, Navier Stokes Equation, Continuity Equation, Viscometry; Types of Bearings, Journal, Thrust, Rolling Element, etc., Bearing Materials, Fundamentals of Lubrication (Reynolds Equation); Physical Significance of Terms in Reynolds Equation, Hydrodynamic Thrust Bearing (Analytical Solution); Hydrodynamic Thrust Bearing (Analytical Solution, Hydrodynamic Thrust Bearing (Numerical Solution; Journal Bearing Analytical Solution, Short and Long Width Journal Bearing Theory; Dynamically Loaded Journal Bearing, Summerfeld Solution; Hydrodynamic Squeeze Film Bearing, Hydrodynamic Squeeze Film Bearing; Lubrication of Non-Conformal Contacts (Hydrodynamic), Hertz Stress Theory & Deformation in Dry Contacts; Non-Dimensionalization, Lubrication of Non-Conformal Contacts (Elasto-Hydrodynamic - Line Contacts); Lubrication of Non-Conformal Contacts (Elasto-Hydrodynamic - Point Contacts), Lubrication of Non-Conformal Contacts (Elasto-Hydrodynamic - Point Contacts); Lubrication of Non-Conformal Contact

Prerequisites:
Not available.

Web Address:
https://engineering.purdue.edu/ME556/

Homework:
25%

Projects:
50%-The project is an assigned, individual work, relevant to the course objective with a 10-minute presentation. You may need to conduct a literature search on the subject matter. You may need to develop computer software or use available software (i.e. ANSYS, Algor, etc.) to complete the project assignment. You are required to provide a typed, well-written document on your findings.

Exams:
25%

Textbooks:
Required--Bernard Hamrock, "Fundamentals of Fluid Film Lubrication", McGraw-Hill.

Computer Requirements:
ProEd Minimum Computer Requirements

ProEd Minimum Requirements: view

Tuition & Fees: view

Farshid Sadeghi
Phone
765-494-5719
Email
sadeghi@ecn.purdue.edu
Office
Purdue University
Mechanical Engineering Bldg
585 Purdue Mall
West Lafayette, IN 47907-2040
Fax
765-494-0539
Instructor HomePage