Zhang, B. and Shin, Y.C., "A Probabilistic Neural Network for
Uncertainty Prediction with Applications to Manufacturing Process
Monitoring", Applied Soft Computing, Volume 124, July 2022, 108995.
https://doi.org/10.1016/j.asoc.2022.108995
Zhang, B. and Shin, Y.C., "An
Adaptive Gaussian Mixture Method for Nonlinear Uncertainty Propagation in
Neural Networks",
Neurocomputing, Volume 458, 7 October
2021, Pages 170-183.
https://doi.org/10.1016/j.neucom.2021.06.007
Zhang, B., Katinas, C., and Shin, Y.C.,
"Robust Wheel Wear Monitoring System for Cylindrical Traverse Grinding",
IEEE/ASME Transactions on Mechatronics, Vol. 25, No. 5, October 2, 2020,
pp. 2220-2229.
https://doi.org/10.1109/TMECH.2020.3007047
Zhang, B., Hong, K.M., and Shin, Y.C., "Deep-Learning-Based Porosity
Monitoring of Laser Welding Process", Manufacturing Letters, Volume 23, January 2020, Pages 62-66.
https://doi.org/10.1016/j.mfglet.2020.01.001
Zhang, B., Liu, S., and Shin, Y.C., "In-Process Monitoring of Porosity
During Laser Additive Manufacturing Process", Additive Manufacturing,
Vol. 28, August 2019, pp. 497-505.
https://doi.org/10.1016/j.addma.2019.05.030
Zhang, B. and Shin, Y.C., "A Multimodal Intelligent Monitoring System
for Turning Processes", Journal of Manufacturing Processes, Volume
35, October 2018, Pages 547-558.
https://doi.org/10.1016/j.jmapro.2018.08.021
Luo, M. and Shin, Y.C., "Estimation of Keyhole Geometry and Prediction
of Welding Defects Based on a Visual System and a Radial Basis Function
Neural Network", International Journal of Advanced Manufacturing
Technology, Volume 81, Issue 1 (2015), Page 263-276.
DOI: 10.1007/s00170-015-7079-1
Luo, M. and Shin, Y.C., "Vision-based Weld Pool Boundary Extraction and
Width Measurement during Keyhole Fiber Laser Welding", Optics and Lasers
in Engineering, Volume 64, January 2015, Pages 59-70.
Doi:
10.1016/j.optlaseng.2014.07.004
Subrahmanya, N. and Shin, Y.C., "A
Variational Bayesian Framework for Group Feature
Selection", International Journal Machine Learning and Cybernetics,
,
Volume 4,
Issue 6, pp 609-619.
DOI:
10.1007/s13042-012-0121-9.
Subrahmanya, N., Shin, Y.C. and Meckl, P.H.,
"A Bayesian Machine Learning
Method for Sensor Selection and Fusion with Application to On-Board Fault
Diagnostics", Mechanical Systems and Signal Processing, 24,
182-192, 2010.
Subrahmanya, N. and Shin, Y.C., "Sparse Multiple Kernel Learning for
Signal Processing Applications", IEEE Trans. on Pattern Analysis and
Machine Intelligence, Vol. 32 Issue: 5, pp. 788 - 798, May 2010.
doi:10.1109/TPAMI.2009.98.
Subrahmanya, N. and Shin, Y.C., "Automated Sensor Selection and Fusion
for Monitoring and Diagnostics of Plunge Grinding Processes", Trans. of
the ASME, J. of Manufacturing Science and Engineering Vol. 130, 031014,
June, 2008.
Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature
Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry",
Transactions ASME, Journal of Heat Transfer, Vol. 125, No. 1, pp.
48-56, Feb. 2003.
Choi, T.J. and Shin, Y.C., "On-line Chatter Detection Using
Wavelet-Based Parameter Estimation", Transactions ASME, Journal of
Manufacturing Science and Engineering, Vol. 125, pp. 21-28, February
2003.
Pfefferkorn, F.E., Incropera, F.P. and Shin, Y.C., "Surface Temperature
Measurement of Partially-Stabilized Zirconia by Long-Wavelength Pyrometry",
ASME IMECE, IMECE2002-39543, CD Volume 1, Nov. 2002, New Orleans,
LA, pp. 1-10.
Hu, S. and Shin, Y.C., "Simultaneous In-Process Roughness Control and Tool Wear
Monitoring via a Distributed Open Architecture Controller", Proceedings of the
ASME Dynamic Systems and Control Division, MED-Vol. 8, pp. 531-537, Symposium on
Precision Machine Control and Metrology, ASME IMECE, Nov. 1998, Anaheim, GA.
Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness
Utilizing Ultrasound", Transactions ASME, Journal of Manufacturing Science
and Engineering, Vol. 120, No. 1, pp. 197-200, February 1998.
Shin, Y.C., Coker, S.A., Oh, S.J. and Hu, S. "In-process Monitoring and Control of
Surface Roughness", Proceedings of the 1998 SAE Aerospace Manufacturing
Technology Conference, pp. 83-86, SAE Technical Paper 981850, June 2-4, 1998,
Long Beach, CA.
Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness
Utilizing Ultrasound", accepted for publication in Transactions ASME, Journal of
Manufacturing Science and Engineering, Vol. 120, No. 1, pp. 197-200,
February 1998.
Leshock, C. and Shin, Y.C., "Study on the Tool Temperature in Turning by a
Tool-Work Thermocouple Technique", accepted for publication in Transactions ASME,
Journal of Manufacturing Science and Engineering, May, 1997.
Pfefferkorn, F., Rozzi, J.C., Incropera, F.P. and Shin, Y.C., "Surface Temperature
Measurement in Laser Assisted Machining Processes", Experimental Heat Transfer,
Vol 10., pp. 291-313, 1997.
Jensen, S.A., Shin, Y.C. and Davies, P., "Inverse Filtering of Unwanted System
Dynamics in Cutting Force Measurement", Proceedings of the ASME Dynamic Systems
and Control Division, pp. 167-174, ASME IMECE, Nov. 1996, Atlanta, GA.
Oh, S.J., Shin, Y.C. and Furgason, E.S., "Measurement and Characterization of
Milled Surface Profiles with Ultrasonic Waves", Measurement, Journal of the
International Measurement Confederation, Vol. 17, No. 1, pp. 59-72, January, 1996.
Coker, S.A. and Shin, Y.C., "In-process Control of Surface Roughness Due to Wear
Using a New Ultrasonic System", International Journal of Machine Tools and
Manufacture, Vol. 36, No. 3, pp. 411-422, March, 1996.
Pettengill, J. and Shin, Y.C., "Surface Contour Measurement by an Ultrasonic
Technique", Proceeding of Japan-USA Symposium on Flexible Automation,
Vol. 2, pp. 1181-1188, Boston, Massachusetts, July 7-10, 1996.
Shin, Y.C., Oh, S.J., and Coker, S.A., "Surface Roughness Measurement by Ultrasonic
Sensing for In-process Monitoring", ASME Trans., J. of Engineering for Industry,
Vol. 117, pp. 1-9, August 1995.
Elanayar, S.V.T. and Shin, Y.C., "Robust Tool Wear Monitoring using Radial Basis
Function Neural Network", ASME Trans., J. of Dynamic Systems, Measurement and
Control, Vol. 117, No. 4, pp. 459-467, December, 1995.
Nguyen, T., Furgason, E.S. and Shin, Y.C., "Feasibility Assessment of Residual
Stress Measurement by an Ultrasonic Technique", Trans. of North American
Manufacturing Research Institution, pp. 287-292, 1995.
Elanayar V.T., S. and Shin, Y.C., "Robust Tool Wear Monitoring", Proc. of
American Control Conference, pp. 1722-1726, Seattle, Washington, June 21-23, 1995.
Vishnupad, P., Shin, Y.C. and Shih A., "Monitoring of Internal Plunge Grinding
Processes", the Proc. of the 1st International Machining & Grinding
Conference, pp. 351-372, MR95-179, Dearborn, Michigan, Sept. 12-14, 1995.
Oh, S.J., Shin, Y.C. and Furgason, E.S., "Surface Roughness Evaluation via
Ultrasonic Scanning", IEEE Trans. on Ultrasonics, Ferroelectrics and Frequency
Control, Vol. 41, No. 6, pp. 1-9, Nov. 1994.
Coker, S., Oh, S.J. and Shin, Y.C., "In-process Monitoring of Surface Roughness
using Ultrasonic Sensing", Manufacturing Science and Engineering, ASME
PED-Vol. 68-1, pp. 145-154, Symposium on "Measurement and Inspection of Products and
Processes", ASME WAM, 1994.
Oh, S.J., Shin, Y.C. and Furgason, E.S., "Surface Roughness Evaluation via
Ultrasonic Scanning", IEEE Symposium on Ultrasonics, Ferroelectrics and Frequency
Control, vol. 2, pp. 741-744, Nov. 1993, Baltimore, MD.
Shin, Y.C. and Oh, S.J., "Surface Roughness Measurement by Ultrasonic Sensing for
In-process Monitoring", ASME DSC-Vol. 50, Symp. on Computer Control Machines for
Manufacturing, Dec. 1993, pp. 3-12, New Orleans, LA.
Shin, Y.C., S.J. Oh, C.O. Ruud, "Investigation of Residual Stresses of Machined
Surface by an X-ray Diffraction Technique", Nondestructive Characterization of
Materials IV , pp. 409-418, 1991.
Elanayar V.T., S. and Shin, Y.C., "Tool Wear Estimation in Turning Operations Based
on Radial Basis Functions", Proc. of the First Artificial Neural Network in
Engineering (ANNIE) Conference, pp. 685-692, ASME Press, 1991.
Shin, Y.C., S.J. Oh, C.O. Ruud, "Machining Condition Monitoring by an X-ray
Diffraction Technique", Trans. of the North American Manufacturing Research
Institution/SME, Vol. 19, 1991, pp. 136-141.
Elanayar V.T., S. and Shin, Y.C., "Flank and Crater Wear Estimation with Radial
Basis Function Neural Networks", PED-Vol. 57, Neural Networks in Manufacturing
and Robotics, pp. 37-51, Nov. 8-13, 1992, ASME Winter Annual Meeting, Anaheim, CA.
Elanayar V.T., S., Shin, Y.C. and Kumara, S., "Machining Condition Monitoring for
Automation Using Neural Networks", ASME PED-Vol. 44, Monitoring and Control
of Manufacturing Processes, 1990 ASME WAM, pp. 85-100.
Shin, Y.C., "Recognition of Cutting State via Compensated Piezoelectric Force
Dynamometer", J. of Wave-Materials Interaction, Vol. 4, 1989, pp. 203-220.