msepostdoc-list SEMINAR NOTICE: M. Dubelman-PhD Final, Tue. 4/9/13, 9:00 am, HAMP 1113

[Stacey, Lisa A]

Please see seminar notice below:

MATERIALS SCIENCE AND ENGINEERING
SEMINAR


Domain Evolution in Lead-Free Thin Film Piezoelectric Ceramics
By:
Meredith E. Dubelman
Ph.D. Final Examination

Advisor:
Prof. J. Blendell


ABSTRACT

Due to environmental and health concerns lead-free piezoelectric systems are currently being evaluated for use as replacements for lead-based ceramics.  Sodium Bismuth Titanate, Na0.5Bi0.5TiO3 (NBT) - based materials offer possible alternatives.  NBT is a perovskite-type, ABO3, compound and is ferroelectric at room temperature.  It has a relatively high Curie temperature, a large remnant polarization, and a high coercive field at room temperature.  NBT can be modified by additives, such as BaTiO3 (BT), to improve its properties further.  NBT-xBT was originally reported to have a morphotropic phase boundary which lies at x = 0.06. The structure transforms from rhombohedral for x < 0.06 to tetragonal for x > 0.06.   However, recent studies have shown that for some compositions NBT-xBT develop a relaxor phase at room temperature.  NBT xBT materials in the compositional range between 0.05 ≤ x ≤ 0.11have been shown to contain nanodomains embedded in a non-polar cubic matrix. The fluctuations of these nanodomains give rise to the relaxor behavior which in some cases is referred to as "relaxor antiferroelectric".  In contrast to ferroelectric materials, in relaxor ferroelectrics thermal fluctuations can cause the poled nanodomains to relax to an unpoled state.
It is necessary to understand local structure effects on the piezoelectric response at the grain level in order to develop materials with improved performance.  Using Piezoresponse Force Microscopy (PFM), this study examines the domain motion within individual grains and domain evolution over time under locally applied electric fields as well as single-point hysteresis loop measurements in thin film NBT and NBT-xBT. These experiments provide an understanding of the domain behavior that cannot be acquired through bulk, macroscopic measurements.  Thin films are fabricated using hydrothermal deposition and pulsed laser deposition.  The films are highly oriented and exhibit relaxor behavior at room temperature.
Date:         Tuesday, April 9, 2013

Time:      9:00 A.M.
Place:        HAMP 1113


Thank you,

Lisa Stacey
Secretary/Development Assistant
Purdue University
School of Materials Engineering
765/494-4100

-------------- next part --------------
An HTML attachment was scrubbed...
URL: </ECN/mailman/archives/msepostdoc-list/attachments/20130401/3ec129f4/attachment.html>