[me-design-list] Design Area Meeting @ 1:30 pm TODAY - ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
Lucht, Martha Leticia
mlucht at purdue.edu
Mon Mar 21 13:31:43 EDT 2022
Please find the agenda for today’s meeting and the WebEx information
ME- Design Area Meeting
March 21, 2022 @ 1:30 PM
WebEx: https://purdue.webex.com/purdue/j.php?MTID=m2447ecff721729939891c8913fc6d282
Meeting number (access code): 2622 168 5420 Meeting password: Design_2022
Join by phone: +1-855-282-6330 US TOLL FREE or +1-415-655-0003 US TOLL
1. Discussion of the New Course Offering (see attachments)
1. Other
Join meeting<https://purdue.webex.com/purdue/j.php?MTID=m2447ecff721729939891c8913fc6d282>
More ways to join:
Join from the meeting link
https://purdue.webex.com/purdue/j.php?MTID=m2447ecff721729939891c8913fc6d282
Join by meeting number
Meeting number (access code): 2622 168 5420
Meeting password: Design_2022
Tap to join from a mobile device (attendees only)
+1-855-282-6330,,26221685420##<tel:%2B1-855-282-6330,,*01*26221685420%23%23*01*> US TOLL FREE
+1-415-655-0003,,26221685420##<tel:%2B1-415-655-0003,,*01*26221685420%23%23*01*> US TOLL
Join by phone
+1-855-282-6330 US TOLL FREE
+1-415-655-0003 US TOLL
Toll-free calling restrictions<https://cisco.com/go/tollfree-restrictions>
Join from a video system or application
Dial 26221685420 at purdue.webex.com
You can also dial 173.243.2.68 and enter your meeting number.
Need help? Go to https://help.webex.com
Best Regards,
Martha Lucht
School of Mechanical Engineering
Administrative Assistant
765.496 7553 Office
765.496.7536 Fax
mlucht at purdue.edu<mailto:mlucht at purdue.edu>
[Description: PU_signature_png.png]
Mechanical Engineering, Room 3003, 585 Purdue Mall, West Lafayette, IN 47907
From: Sadeghi, Farshid
Sent: Monday, March 21, 2022 8:15 AM
To: Lucht, Martha Leticia <mlucht at purdue.edu<mailto:mlucht at purdue.edu>>
Subject: FW: FW: ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
See below. You were copied on the email.
Farshid
Farshid Sadeghi, Ph.D.
Cummins Distinguished Professor of Mechanical Engineering
Director of the School of Mechanical Engineering Tribology Laboratory (METL)
Purdue University, School of Mechanical Engineering
585 Purdue Mall, West Lafayette, IN 47907-2088
Website: https://engineering.purdue.edu/METL/
From: Sadeghi, Farshid
Sent: Tuesday, 15 March, 2022 8:54 AM
To: Lucht, Martha Leticia <mlucht at purdue.edu<mailto:mlucht at purdue.edu>>; Ajay P Malshe (amalshe at purdue.edu<mailto:amalshe at purdue.edu>) <amalshe at purdue.edu<mailto:amalshe at purdue.edu>>; Dave Cappelleri <dcappell at purdue.edu<mailto:dcappell at purdue.edu>>; Fu Zhao <fzhao at purdue.edu<mailto:fzhao at purdue.edu>>; Gordon Pennock <pennock at ecn.purdue.edu<mailto:pennock at ecn.purdue.edu>>; Greg Jensen (jensen23 at purdue.edu<mailto:jensen23 at purdue.edu>) <jensen23 at purdue.edu<mailto:jensen23 at purdue.edu>>; Hess, Beth J <bethhess at purdue.edu<mailto:bethhess at purdue.edu>>; Jitesh Panchal <jpancha at purdue.edu<mailto:jpancha at purdue.edu>>; Karthik Ramani <ramani at ecn.purdue.edu<mailto:ramani at ecn.purdue.edu>>; Michael Sealy (msealy at purdue.edu<mailto:msealy at purdue.edu>) <msealy at purdue.edu<mailto:msealy at purdue.edu>>; Min Liu (liu66 at purdue.edu<mailto:liu66 at purdue.edu>) <liu66 at purdue.edu<mailto:liu66 at purdue.edu>>; Nina Mahmoudian (ninam at purdue.edu<mailto:ninam at purdue.edu>) <ninam at purdue.edu<mailto:ninam at purdue.edu>>; Raymond J. Cipra <cipra at purdue.edu<mailto:cipra at purdue.edu>>; sadeghi at purdue.edu<mailto:sadeghi at purdue.edu>; Satish Boregowda (sboregow at purdue.edu<mailto:sboregow at purdue.edu>) <sboregow at purdue.edu<mailto:sboregow at purdue.edu>>; Tahira Reid <reid20 at purdue.edu<mailto:reid20 at purdue.edu>>; Todd Nelson (nelso366 at purdue.edu<mailto:nelso366 at purdue.edu>) <nelso366 at purdue.edu<mailto:nelso366 at purdue.edu>>
Cc: Eckhard Groll <groll at purdue.edu<mailto:groll at purdue.edu>>
Subject: FW: FW: ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
All,
Attached please find attached the documentation for a new class our colleague Satish would like to offer. Please review, we will have a meeting on Monday 3/21 to discuss.
Martha – please send a meeting invite for Monday 3/21 to the design group.
Agenda item: discussion of the New Course Offering.
Thanks,
Farshid
Farshid Sadeghi, Ph.D.
Cummins Distinguished Professor of Mechanical Engineering
Director of the School of Mechanical Engineering Tribology Laboratory (METL)
Purdue University, School of Mechanical Engineering
585 Purdue Mall, West Lafayette, IN 47907-2088
Website: https://engineering.purdue.edu/METL/
From: Boregowda, Satish C
Sent: Monday, 14 March, 2022 4:39 PM
To: Sadeghi, Farshid <sadeghi at purdue.edu<mailto:sadeghi at purdue.edu>>
Cc: Jones, James D. <james.d.jones.1 at purdue.edu<mailto:james.d.jones.1 at purdue.edu>>
Subject: FW: FW: ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
Dear Farshid,
As per your email below, I have informed Eckhard about this course and received his support below. I would greatly appreciate if you could put this course for approval on March 21 (Monday) meeting. Thank you very much and I look forward to the meeting.
Best regards,
Satish Boregowda
From: Eckhard A. Groll <groll at purdue.edu<mailto:groll at purdue.edu>>
Sent: Sunday, March 13, 2022 2:54 PM
To: Boregowda, Satish C <sboregow at purdue.edu<mailto:sboregow at purdue.edu>>
Cc: Jones, James D. <james.d.jones.1 at purdue.edu<mailto:james.d.jones.1 at purdue.edu>>
Subject: Re: FW: ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
Dear Satish,
In general, I am supportive of this course. However, following appropriate procedures, I suggest that Farshid adds this course to the agenda of one of the next Design Area faculty meetings so that we can obtain approval by the academic area for this course.
Best wishes,
Eckhard
On 3/12/2022 5:26 PM, Boregowda, Satish C wrote:
Dear Eckhard,
I hope you are doing well. I am planning to offer a senior undergraduate elective course titled “Reliability in Engineering Design” in Spring 2023. I have indicated my interest to Farshid, Jim, and Ganesh about this. Ganesh has indicated to me that he would not be teaching his reliability class in the future (email below).
I am kindly asking for your approval and support for this course. On another note, I will be teaching a new course ME 354 (Machine Design) in Fall 2022 and I felt that it would beneficial to teach an exclusive undergraduate reliability engineering course.
Please let me know your thoughts on this. Thank you.
Best regards,
Satish
From: Farshid Sadeghi <sadeghi at purdue.edu><mailto:sadeghi at purdue.edu>
Sent: Saturday, March 12, 2022 5:09 PM
To: Boregowda, Satish C <sboregow at purdue.edu><mailto:sboregow at purdue.edu>
Subject: Re: ME 490 - Reliability in Engineering Design - Approval for a Senior Undergraduate Elective
Dear Satish,
I am all in favor of offering this class. However, I believe perhaps it is best for you to discuss this with Eckhard. I will then be happy to move it forward.
Best,
Farshid Sadeghi, Ph.D.
Cummins Distinguished Professor of Mechanical Engineering
Purdue University, School of Mechanical Engineering
585 Purdue Mall, West Lafayette, IN 47907-2088
On Mar 12, 2022, at 4:48 PM, Boregowda, Satish C <sboregow at purdue.edu<mailto:sboregow at purdue.edu>> wrote:
Dear Farshid,
I hope you are doing well. I am writing to seek the approval of the design group to teach an elective class in Spring 2023. The course is titled "Reliability in Engineering Design". I understand that there is another graduate level elective course previously taught by Ganesh Subbarayan. I contacted Ganesh in this regard and found out that he will not be teaching this course in the near future and possibly beyond as per the email below.
Upon conversation with Jim Jones, we feel that it would more convenient to offer an elective course exclusively for undergraduate students. This is because many undergrads would be intimidated by 5XX number. I also feel that this would be a valuable course for undergrads in addition to ME 354 . In this regard, I have attached the course profile to be evaluated by the design committee in our March 21 meeting. I would be happy to answer any questions about this proposed course in the meeting on Monday after the break. I would appreciate any feedback from you and the committee. Thank you and I look forward to hearing from you.
Best regards,
Satish
Dear Satish,
Sorry for my slow response. I am working on a proposal due in early March and that has consumed all my time over the past few weeks.
I am unlikely to be teaching ME 571 in the next year and possibly beyond that. So, it will be fine for you to take over the class, if you like.
Best regards,
Ganesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </ECN/mailman/archives/me-design-list/attachments/20220321/a49c901d/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 9562 bytes
Desc: image001.png
URL: </ECN/mailman/archives/me-design-list/attachments/20220321/a49c901d/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ME490_ReliabilityEngineerignDesign.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 30269 bytes
Desc: ME490_ReliabilityEngineerignDesign.docx
URL: </ECN/mailman/archives/me-design-list/attachments/20220321/a49c901d/attachment-0001.docx>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ME490_Syllabus_Spring_2023.doc
Type: application/msword
Size: 162816 bytes
Desc: ME490_Syllabus_Spring_2023.doc
URL: </ECN/mailman/archives/me-design-list/attachments/20220321/a49c901d/attachment-0001.doc>
More information about the me-design-list
mailing list