MovianVPN 3.10: Connecting to Purdue Air Link (Unsupported)

Update: Purdue Air Link now supports Pocket PC 2003. You should use the offical Air Link software to connect to Air Link with your Pocket PC.

Disclaimer

The following instructions are not officially supported by ITaP or ECN. They may be useful, but are not guaranteed to work. Use them at your own risk.

MovianVPN version 3.10 for Pocket PC 2003 was released in December and is not fully supported by ITaP at this time as noted on the PAL website: http://www.itap.purdue.edu/airlink/. It may become supported in the near future, at which time the official support should be used instead of this document.

Creating a Policy

All MovianVPN PPC 2003 client files, this document and a word document with pocket pc screen captures can be found in the following FTP folder: ftp://ftp.ecn.purdue.edu/zadik

First you need to download the Movian Zip File and install according to the included instructions (within zip file). Once that is complete, refer back to this document to setup the policy.

(Note: The included policy file: vpolimp.wc3 is not compatible with the PPC 2003 version of MovianVPN. So we will create a new one. See below.)

To create a policy:

• Start the MovianVPN Client. (note: there will NOT be a policy name displayed).
• Select NEW
• Input the following information:
  • Policy Name = Pal
  • Select "Cisco VPN Concentrator 3000" from the drop-down menu
  • Gateway Address is: vpn1.airlink.purdue.edu
• Then click CONTINUE
• Group Name = vpnusers
• Group Password = vpnusers
• User Name = insert your Purdue/ECN username
• Click DONE and you should be all set. (You might want to soft reset your device also).

To use

• start MovianVPN, policy name should be shown as "Pal"
• Follow Login Process.
• Then Click EXIT on the MovianVPN screen

When you are finished, select MovianVPN again from your start menu or Programs folder and logout.