Member-level Redundancy in Built-up Steel Members

Member-level Redundancy in Built-up Steel Members
The objective of this research is to quantify the redundancy possessed by built-up steel members (bolted or riveted). Typically, built-up members will not 'fail' if one of the components fails (whether through fatigue or fracture). However, there is very little experimental data quantifying the remaining fatigue life and strength of a member in which one of the components has failed.

The objective of this research is to quantify the redundancy possessed by built-up steel members (bolted or riveted).  Typically, built-up members will not 'fail' if one of the components fails (whether through fatigue or fracture).  However, there is very little experimental data quantifying the remaining fatigue life and strength of a member in which one of the components has failed.

Furthermore, if built-up members are located in bridges classified as fracture critical, evidence of sufficient member redundancy may allow the bridge to be reclassified as non-fracture critical.  Reclassification would release these members from the more rigorous arms-length inspection currently required.  More rational inspection intervals for these members will then be permissible.  These intervals will be addressed through the outcomes of this research.

Sponsors: Transportation Pooled Fund (Federal Highway Administration, Indiana DOT, Iowa DOT, Minnesota DOT, New York DOT, Oregon DOT, Wisconsin DOT, Wyoming DOT, US Army Corps of Engineers)
Faculty Investigator: Robert Connor
Graduate Student: Matt Hebdon