Sort by Specialty Group

Sort Alphabetically

Sort by Year


Sorted by Year

Publications

  • Pay, A.C., Canbay, E., and Frosch, R.J., "Experimental Evaluation of Beams with Spliced FRP Reinforcement," ACI Structural Journal, in progress.
  • Pay, A.C. and Frosch, R.J., "Bond Strength of Reinforcement: A Unified Theory," ACI Structural Journal, in progress.
  • Calabrese, D.M., Wilken, D., and Frosch, R.J., "Bowing of Brick Precast Panels caused by Differential Shrinkage," PCI Journal, submitted.
  • Bice, J.K. and Frosch, R.J., "Simplified Modeling of Restrained Volume Changes in Concrete Slabs," ACI Structural Journal, in progress.
  • Bice, J.K. and Frosch, R.J., "A Parametric Study of Design Factors Influencing Cracking from Restrained Shrinkage," ASCE Journal of Bridge Engineering, in progress.
  • Sadeghi, A., Karava, P., 2015. Integration of occupant interactions with window blinds on stochastic model predictive control of mixed-mode buildings, ASHRAE Transactions, Winter Conference, Chicago.
  • Whelton AJ, McMillan L, Connell M, Kelley KM, Gill JP, White KD, Gupta R, Dey R, Novy C. 2014. Residential Tap Water Contamination Following the Freedom Industries Chemical Spill: Perceptions, Water Quality, and Health Impacts. Environmental Science & Technology. DOI: 10.1021/es5040969

    Tabor M, Newman D, Whelton AJ. 2014. Stormwater Chemical Contamination Caused by Cured-In-Place Pipe (CIPP) Infrastructure Rehabilitation Activities. Environmental Science & Technology. 48 (18), 10938–10947.

  • Xiong, Y., Tobias, J. Mannering, F., 2014. The analysis of vehicle crash injury-severity data: A Markov switching approach with road-segment heterogeneity. Transportation Research Part B 67, 109-128. [PDF]
  • Winston, C., Mannering, F., 2014. Implementing technology to improve public highway performance: A leapfrog technology from the private sector is going to be necessary. Economics of Transportation (In Press). [PDF]
  • Shaheed, M., K. Gkritza. A Latent Class Analysis of Single-Vehicle Motorcycle Crash Severity Outcomes. Analytic Methods in Accident Research 2: 30-38 (2014).
  • Sadeghi, A., Karava, P., 2014. Implementation of stochastic model predictive control of mixed-mode buildings based on probabilistic interactions of occupants with window blinds. 3rd High Performance Buildings Conference, Purdue University.
  • Ramaraj, S., Yang, B., Braun, J.E., Groll, E.A., and W.T. Horton, "Experimental Analysis of Oil Flooded R410A Scroll Compressor," International Journal of Refrigeration. Volume 46, pp. 185-195, October 2014.
  • Mudgal, A., S. Hallmark, A. Carriquiry, K. Gkritza, Driving Behavior at a Roundabout: A Hierarchical Bayesian Regression Analysis, Transportation Research Part D: Transport and Environment, 26: 20-26 (2014).
  • Mannering, F., Bhat, C., 2014. Analytic methods in accident research: Methodological frontier and future directions. Analytic Methods in Accident Research 1, 1-22. [PDF]
  • Li, W., K. Gkritza, C. Albrecht, "The Culture of Distracted Driving: Evidence from a Public Opinion Survey in Iowa," Transportation Research Part F 27: 337-347 (2014).
  • Li, S., Joe, J., Hu, J., Karava, P., 2014. System identification and model-predictive control of office buildings with integrated photovoltaic-thermal collectors, radiant floor heating and active thermal storage. Solar Energy (In Press).
  • Li, S., Karava, P., Currie, S., Lin, W. E., Savory, E., 2014. Energy modeling of photovoltaic thermal Systems with corrugated unglazed transpired solar collectors - part 1: Model development and validation. Solar Energy 102, 282-296.
  • Li, S., Karava, P., 2014. Modeling and system identification of solar buildings with distributed energy generation and storage. 10th European Conference on Product and Process Modelling, Vienna, Austria.
  • Li, S., Karava, P., 2014. Modeling and predictive control of high performance buildings with distributed energy generation and thermal storage. 3rd High Performance Buildings Conference, Purdue University.
  • Li, S., Karava, P., 2014. Energy modeling of photovoltaic thermal systems with corrugated unglazed transpired solar collectors - part 2: performance analysis. Solar Energy 102, 297-307.
  • Lavrenz, S.M., V. D. Pyrialakou, K. Gkritza, "Modeling Driver Behavior in Dilemma Zones: A Discrete/Continuous Formulation with Selectivity Bias Corrections," Analytic Methods in Accident Research 3-4: 44-55 (2014).
  • Hu, J., Karava, P., 2014. Model predictive control strategies for buildings with mixed-mode cooling. Building and Environment 71, 233-244.
  • Hu, J., Karava, P., 2014. A state-space modeling approach for predictive control of buildings with mixed-mode cooling. 3rd High Performance Buildings Conference, Purdue University.
  • Hu, J., Karava, P., 2014. A state-space modeling approach for predictive control of buildings with mixed-mode cooling. 10th European Conference on Product and Process Modelling, Vienna, Austria.
  • Hu, J., Karava, P., 2014. A state-space modeling approach and multi-level optimization algorithm for predictive control of multi-zone buildings with mixed-mode cooling. Building and Environment 80, 259-273.
  • Gopalakrishnan, K., and K. Gkritza, "Forecasting Transportation Infrastructure Impacts of Renewable Energy Industry Using Neural Networks," Technological and Economic Development of Economy, 19(Supplement 1): S157-S175 (2014).
  • Gkritza, K., R. Souleyrette, M. Baird, and B. Danielson, "An Empirical Bayes Approach for Estimating Urban Deer Vehicle Crashes Using Police and Maintenance Records," ASCE Journal of Transportation Engineering, 140 (2), 04013002 (2014).
  • Essig, R., C. Troy, B.K. Jesiek, J. Boyd, and N. Trellinger. (2014). "Adventures in Paragraph Writing: The Development and Refinement of Scalable and Effective Writing Exercises for Large-enrollment Engineering Courses." Proceedings of the 2014 ASEE Annual Conference and Exposition, Indianapolis, IN, June 15-18, 2014.
  • Coulter, D. and M.S. Sepúlveda, C.D. Troy, T.O. Höök. (2014). Thermal habitat quality of aquatic organisms near power plant discharges: potential exacerbating effects of climate warming. Fisheries Ecology and Management. 21: 196-210.
  • Cerwick, D., K. Gkritza, M. Shaheed, Z. Hans, "A Comparison of the Latent Class and Mixed Logit Methods by Crash Data," Analytic Methods in Accident Research 3-4: 11-27 (2014).
  • Bell, I.H., Groll, E.A., Braun, J.E., Horton, W.T., and V. Lemort, "Comprehensive Analytic Solutions for the Geometry of Symmetric Constant-Wall-Thickness Scroll Machines," International Journal of Refrigeration. Volume 45, pp. 223-242, September 2014.
  • Bach, C.K., Groll, E.A., Braun, J.E., and W.T. Horton, "Mitigation of Air Flow Maldistribution in Evaporators," Applied Thermal Engineering. Volume 73, Issue 1, pp. 879-887, December 2014.
  • Bach, C.K., Groll, E.A., Braun, J.E., and W.T. Horton, "Development of a Virtual EXV Flow Sensor for Applications with Two-phase Flow Inlet Conditions," International Journal of Refrigeration. Volume 45, pp. 243-250, September 2014.
  • Greifenstein, M., D. White, A. Stubner, J. Hout, A.J. Whelton, "Impact of Temperature and Storage Duration on the Chemical and Odor Quality of Military Packaged Water in Polyethylene Terephthalate Bottles," J. of the Science of the Total Environment, 2013, pg. 376-383.

    Donaldson, B.M., A.J. Whelton, "Water Quality Implications of Culvert Rehabilitation Technologies: A Field Study of Cured-in-place Pipe and Spray-on Liner Technologies," J. of the Transportation Research Board, 2013.

    Whelton, A.J., T. Nguyen, "Contaminant Migration from Polymeric Pipes used in Buried Potable Water Distribution Systems: A Review," J. of Environmental Science and Technology, Vol. 43/7, 2013, pg. 679-751.

  • Xiong, Y., Mannering, F., 2013. The heterogeneous effects of guardian supervision on adolescent driver-injury severities: A finite-mixture random-parameters approach. Transportation Research Part B 49, 39-54. [PDF]
  • Wu, Z., Sharma, A., Mannering, F., Wang, S., 2013. Safety impacts of signal-warning flashers and speed control at high-speed signalized intersections. Accident Analysis and Prevention 54, 90-98. [PDF]
  • Woodland, B.J., Krishna, A., Braun, J.E., Groll, E.A., Horton, W.T., and S.V. Garimella, "Thermodynamic Comparison of Organic Rankine Cycles Employing Liquid-Flooded Expansion or a Solution Circuit," Applied Thermal Engineering. Volume 61, Issue 2, pp. 859-865, November 2013.
  • Shaheed, M., W. Zhang, K. Gkritza, and Z. Hans, "A Mixed Logit Analysis of Two-Vehicle Crash Severities Involving a Motorcycle," Accident Analysis and Prevention, Special Issue on Emerging Research Methods and their Application to Road Safety, 61, 119-128 (2013).
  • Nyika, S., Holloway, S.O., Horton, W.T. and J.E. Braun, "Generalized Performance Maps for Variable-Speed Residential Heat Pumps," ASHRAE Transactions, Vol. 119 Issue 1, pp.1-8. August 2013. 1st Tier category.
  • Li, S., Karava, P., Savory, E., Lin, W. E., 2013. Airflow and thermal analysis of flat and corrugated unglazed transpired solar collectors. Solar Energy 91, 297-315.
  • Li, S., Karava, P., 2013. Energy modeling and performance assessment of building integrated photovoltaic thermal systems with transpired solar collectors. CISBAT, Lausanne, Switzerland.
  • Lavrenz, S., and K. Gkritza, "Environmental and Energy Impacts of Automated Electric Highway Systems," Journal of Intelligent Transportation Systems, 17 (2), 221-232 (2013).
  • Hu, J., Karava, P., 2013. Simulation of anticipatory control strategies in buildings with mixed-mode cooling. 13th International Conference of the International Building Performance Simulation Association, Chambery, France.
  • Hu, J., Karava, P., 2013. Simulation and analysis of anticipatory control strategies in buildings with mixed-mode cooling. CISBAT, Lausanne, Switzerland.
  • Hu, J., Karava, P., 2013. Modeling and predictive control of mixed-mode buildings with MATLAB/GENOPT. Architectural Engineering Institute conference, Penn State University.
  • Greig, D., Siddiqui, K., Karava, P., 2013. The influence of surface heating on the flow dynamics within a transpired air collector. International Journal of Heat and Mass Transfer 56, 390-402.
  • Bell, I.H., Groll, E.A., Braun, J.E., and W.T. Horton, "Experimental Testing of an Oil-Flooded Hermetic Scroll Compressor," International Journal of Refrigeration. Vol. 36, Issue 7, pp. 1866-1873, November 2013.
  • Bell, I.H., Groll, E.A., Braun, J.E., and W.T. Horton, "A Computationally Efficient Hybrid Leakage Model for Positive Displacement Compressors and Expanders," International Journal of Refrigeration. Vol. 36, Issue 7, pp. 1965-1973. November 2013.
  • Bach, C.K., Groll, E.A., Braun, J.E., and W.T. Horton, "Application of a hybrid control of expansion valves to a domestic heat pump and a walk-in cooler refrigeration system," ASHRAE HVAC&R Research Journal, Vol. 19, Issue 7, pp. 800-813, October 2013.
  • Ahmed, S., C.D. Troy, and N. Hawley. (2013). Spatial structure of internal Poincaré waves in Lake Michigan. Environmental Fluid Mechanics, 1-21.
  • Zhang, Z., Bai, Q., Labi, S., and Sinha, K. C. (2013). General Framework for Evaluating Long-Term Leasing of Toll Roads. Transportation Research Record: Journal of the Transportation Research Board, 2345(1), 83-91.
  • Everett, S., Xiong, Y., Sinha, K. C., and Fricker, J. D. (2013). Ex Post Facto Evaluation of Indiana's Highway Investment Program. Transportation Research Record: Journal of the Transportation Research Board, 2345(1), 24-30.
  • Bai, Q., Labi, S., Sinha, K. C., and Thompson, P. D. (2013). Bridge user cost estimation-a synthesis of existing methods and addressing the issues of multiple counting, workzones and traffic capacity limitation. Structure and Infrastructure Engineering, 9(9), 849-859.
  • Arman, M., Labi, S., and Sinha, K. C. (2013). Perspectives of the Operational Performance of Public Transportation Agencies with Data Envelopment Analysis Technique. Transportation Research Record: Journal of the Transportation Research Board, 2351(1), 30-37.
  • S.D Bereznicki, A.J. Heber, Jacko, Robert B., (2012), "Odor and Odorous Chemical Emissions From Dairy And Swine Facilities: Part 1 Project Overview and Collection Methods and Quality Control," in review with the Transactions of the American Society of Agricultural and Biological Engineers.
  • Ruan, W., and W.T. Horton, "Thermal Network Model for Variable Flow Ground Heat Exchanger Systems," ASHRAE Transactions, Vol. 118, Issue 1, pp. 550-557, August 2012.
  • Ruan, W., Horton, W.T., and M. Qu., "Modeling Analysis of an Enthalpy Recovery Wheel with Purge Air," International Journal of Heat and Mass Transfer. Vol. 55, Issues 17-18, pp. 4665-4672. August 2012.
  • Rentziou, A., K. Gkritza, and R. Souleyrette, "VMT, Energy Consumption, and Greenhouse Gas Emissions Forecasting for Passenger Transportation," Transportation Research Part A, 46(3), 487-500 (2012).
  • Li, S., Karava, P., 2012. Numerical study of convective heat transfer for flat unglazed transpired solar collectors. 2nd High Performance Buildings Conference, Purdue University.
  • Li, S., Karava, P., 2012. Evaluation of turbulence models for airflow and heat transfer prediction in BIPV/T systems optimization. Solar Heating and Cooling for Buildings conference, San Francisco.
  • Hu, J., Karava, P., 2012. Modeling and predictive control strategies in buildings with mixed-mode cooling. 2nd High Performance Buildings Conference, Purdue University.
  • Hu, J., Karava, P., 2012. Model-predictive controls for efficient mixed-mode cooling of buildings. ASHRAE Annual Conference, San Antonio, TX.
  • Greig, D., Siddiqui, K., Karava, P., 2012. Investigation of the turbulent flow behavior in a transpired air collector. ASME Fluids Engineering Summer Meeting - FEDSM2012, July 8-12, Puerto Rico.
  • Greig, D. Siddiqui, K., Karava, P. 2012. An experimental investigation of the flow structure over a corrugated waveform in a transpired air collector. International Journal of Heat and Fluid Flow 38, 133-144.
  • Choi, J. M., C. D. Troy, T.-C. Hsieh, N. Hawley, and M. J. McCormick (2012). A Year of Internal Poincaré Waves in Southern Lake Michigan. Journal of Geophysical Reseasrch, doi:10.1029/2012JC007984.
  • Bell, I.H., Lemort, V., Groll, E.A., Braun, J.E., Horton, W.T., and G.B. King, "Optimization of a Scroll Compressor for Liquid Flooding," International Journal of Refrigeration. Vol. 35, Issue 7, pp. 1901-1913. November 2012.
  • Bell, I.H., Lemort, V., Groll, E.A., Braun, J.E., Horton, W.T., and G.B. King, "Liquid-Flooded Compression and Expansion in Scroll Machines -- Part I: Model Development," International Journal of Refrigeration. Vol. 35, Issue 7, pp. 1878-1889. November 2012.
  • Bell, I.H., Lemort, V., Groll, E.A., Braun, J.E., Horton, W.T., and G.B. King, "Liquid Flooded Compression and Expansion in Scroll Machines -- Part II: Experimental Testing and Model Validation," International Journal of Refrigeration. Vol. 35, Issue 7, pp. 1890-1900. November 2012.
  • Anastasopoulos, P., Mannering, F., Shankar, V., Haddock, J., 2012. A study of factors affecting highway accident rates using the random-parameters tobit model. Accident Analysis and Prevention 45(1), 628-633. [PDF]
  • Karava, P., Stathopoulos, T., 2012. Wind-induced internal pressures in buildings with large facade openings. ASCE Journal of Engineering Mechanics, 138(4), 358-370.
  • Karava, P., Jubayer, C., Savory, E., Li, S. 2012. Effect of incident flow conditions on convective heat transfer from the inclined windward roof of a low-rise building with application to photovoltaic-thermal systems. Journal of Wind Engineering & Industrial Aerodynamics 104-106, 428-438.
  • Karava, P., Athienitis, A.K., Stathopoulos, T., Mouriki, E., 2012. Experimental study of the thermal performance of a large institutional building with mixed-mode cooling and hybrid ventilation. Building and Environment 57, 313-326.
  • Troy, C.D., Ahmed, S., Hawley, N., and A. Goodwell . (2012) "Cross-shelf thermal structure in Lake Michigan during the stratified periods," Journal of Geophysical Research, VOL. 117, C02028, 16 PP., 2012
  • "Development of Fatigue Loading and Design Methodology for High-Mast Light Poles", R.J. Connor, S.H. Collicott, A.M. DeSchepper, R.J. Sherman, and J.A. Ocampo., NCHRP Report 718, National Cooperative Highway Research Program (NCHRP), Washington, DC, 2012.
  • "Bridge Deck Design Criteria and Testing Procedures - Final Report for NCHRP Project, 10-72", R.J. Connor, J. Liu, C. Higgins, National Cooperative Highway Research Program National Academies, Washington, DC, July, 2012.
  • Ong, G. P., Fitzpatrick, V., Labi, S., and Sinha, K. C. (2012). Hazard-Based Analysis of Highway Project Development Times. Journal of Transportation Engineering, 138(10), 1259-1268.
  • Bai, Q., Labi, S., Sinha, K. C., and Thompson, P. D. (2012). Multiobjective Optimization for Project Selection in Network-Level Bridge Management Incorporating Decision-Maker's Preference Using the Concept of Holism. Journal of Bridge Engineering, 18(9), 879-889.
  • doi:10.1029/2011JC007148.
  • Troutner, T.J., K. Gkritza, "Impacts of Extended Interstate Closures to Regional Freight Logistics: Case Study of 2011 Interstate 29 Closure," Transportation Research Record, Journal of the Transportation Research Board, Volume 2410: 113-122 (2014).
  • Stenabaugh, S., Karava, P., Kopp, G., 2011. Design wind loads for photovoltaic systems on sloped roofs of residential buildings. 13th International Conference on Wind Engineering, Amsterdam, The Netherlands, July 10-15.
  • Savolainen, P., Mannering, F., Lord, D., Quddus, M., 2011. The statistical analysis of crash-injury severities: A review and assessment of methodological alternatives. Accident Analysis and Prevention 43(5), 1666-1676. [PDF]
  • Rundle, C.A., Lightstone, M.F., Oosthuizen, P., Karava, P., Mouriki, E., 2011. Validation of Computational Fluid Dynamics simulations for atria geometries. Building and Environment 46 (7), 1343-1353.
  • Ruan, W., and W.T. Horton, "Long Term Model-Based Performance of Ground Heat Exchangers," ASHRAE HVAC&R Research Journal, Vol. 17, Issue 3, pp. 284-296, 2011.
  • Morgan, A., Mannering, F., 2011. The effects of road-surface conditions, age, and gender on driver-injury severities. Accident Analysis and Prevention 43(5), 1852-1863. [PDF]
  • Kozy, B.M., Connor, R.J., Paterson, D., Mertz, D.R., "Proposed Revisions to the AASHTO LRFD Bridge Design Specifications for Orthotropic Steel Deck Bridges", Journal of Bridge Engineering, American Society of Civil Engineers. Volume 16, Issue 6, pp. 759-767, November/December, 2011.
  • Higgins C., Turan, T., Connor, R.J., Liu, J, "A Unified Approach for LRFD Live Load Moments in Bridge Decks", Journal of Bridge Engineering, American Society of Civil Engineers. Volume 16, Issue 6, pp. 804-811, November/December, 2011.
  • Anastasopoulos, P., Mannering, F., 2011. An empirical assessment of fixed and random parameter logit models using crash- and non-crash-specific injury data. Accident Analysis and Prevention 43(3), 1140-1147. [PDF]
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2011. Airflow assessment in cross-ventilated buildings with operable facade elements. Building and Environment 46 (1), 266-279.
  • Karava, P., Jubayer, C., Savory, E., 2011. Numerical modeling of forced convective heat transfer from the inclined windward roof of an isolated low-rise building with application to photovoltaic/thermal systems. Applied Thermal Engineering 31, 1950-1963.
  • Karava, P., Jubayer, C., Savory, E., 2011. Effect of terrain on the forced convective heat transfer from the inclined windward roof of a low-rise building. 13th International Conference on Wind Engineering, Amsterdam, The Netherlands, July 10-15.
  • Patidar, V., Labi, S., Morin, T., Thompson, P. D., and Sinha, K. C. (2011). Evaluating methods and algorithms for multicriteria bridge management at the network level. Transportation Research Record: Journal of the Transportation Research Board, 2220(1), 38-47.
  • Bai, Q., Labi, S., and Sinha, K. C. (2011). Trade-off analysis for multiobjective optimization in transportation asset management by generating Pareto frontiers using Extreme Points Nondominated Sorting Genetic Algorithm II. Journal of Transportation Engineering, 138(6), 798-808.
  • Yu, D., Li, H., and Braun, J.E., "A Review of Virtual Sensing Technology and Application in Building Systems," In Review, HVAC&R Research, 2010.
  • Warpinski, M.K, Connor, R.J., Hodgson, I.C., "The Influence of Flexibility on the Fatigue Performance of the Base Plate Connection in High-mast Lighting Towers", Journal of Structural Engineering, American Society of Civil Engineers, Vol. 136, No. 3, March 2010, pp. 324-329.
  • Shen, B., Braun, J.E., and Groll, E.A., "The Impact of Refrigerant Charge, Air Flow and Expansion Devices on the Measured Performance of an Air-Source Heat Pump," In Review, ASHRAE Transactions, 2010.
  • Shen, B., Braun, J.E., and Groll, E.A., "Modeling Improvements for Air Source Heat Pumps," In Review, ASHRAE Transactions, 2010.
  • Pujol S., and Fick D., "The Test of a Full-Scale Three-Story RC Structure with Masonry Infill Walls," submitted to Engineering Structures, on 6 January, 2010.
  • Parr M.J., Connor R.J. Bowman M., "A Method for Determining the Interval for Hands-on Inspection of Steel Bridges with Fracture Critical Members", Journal of Bridge Engineering, American Society of Civil Engineers Vol. 15, No. 4, July/August 2010, pp. 352-363.
  • Mu DY, Seager T, Rao PSC, and Zhao, F, 2010. A Resilience Perspective of Biofuels Production, INTEGRATED ENVIRONMENTAL ASSESSMENT & MANAGEMENT (In Press)
  • Mu DY, Seager T, Rao PSC, Park, J, and Zhao, F, 2010. Comparative Life Cycle Assessment of Ligno-cellulosic Ethanol Production: Biochemical Versus Thermochemical Conversion, ENVIRONMENTAL MANAGEMENT, 46(4), 565-578.
  • Mathison, M., Braun, J., Groll, E., "Performance limit for economized cycles with continuous refrigerant injection," In Press, International Journal of Refrigeration, 2010.
  • Malyshkina, N., Mannering, F., 2010. Zero-state Markov switching count-data models: An empirical assessment. Accident Analysis and Prevention 42(1), 122-130. [PDF]
  • Malyshkina, N., Mannering, F., 2010. Empirical assessment of the impact of highway design exceptions on the frequency and severity of vehicle accidents. Accident Analysis and Prevention 42(1), 131-139. [PDF]
  • Lord, D., Mannering, F., 2010. The statistical analysis of crash-frequency data: A review and assessment of methodological alternatives. Transportation Research Part A 44(5), 291-305. [PDF]
  • Lombardi, N.J.*, and Liu, J. (2010) "Steel Hexagonal Honeycomb Core Equivalent Elastic Moduli for Bridge Deck Sandwich Panels," ASCE Journal of Aerospace Engineering, January 2010.
  • Jubayer, C., Karava, P., Savory, E., 2010. CFD simulations for evaluation of forced convective heat transfer coefficients on photovoltaic/thermal systems integrated on the windward roof surface of a low-rise building. 4th International Symposium on Computational Wind Engineering, Chapel Hill, North Carolina, May 23-27.
  • Jubayer, C., Karava, P., Savory, E., 2010. Building-integrated photovoltaic/thermal systems - numerical prediction of exterior convective heat transfer coefficients and parametric analysis. 1st International High Performance Buildings Conference at Purdue, July 12-15.
  • Higgins C., Turan, T., Connor, R.J., "Rapid Ranking Procedure for Gusset Plate Connections in Existing Steel Truss Bridges", Journal of Bridge Engineering, American Society of Civil Engineers Volume 15, Issue 5, pp. 581-596, September/October, 2010.
  • Hengeveld, D.W., Braun, J.E., and Groll, E.A., "Optimal Distribution of Electronic Components to Balance Environmental Fluxes," In Review, Journal of Spacecraft and Rockets, 2010.
  • G. Yan, W. Guo, S.K. Dyke, and C. Lu, "Experimental Validation of the Multi-Level Damage Localization Technique with Distributed Computation", Smart Structures and Systems: Special Issue on Wireless Sensor Advances and Applications to Monitoring of Civil Infrastructure, pp. July, 2010
  • .
  • Botter, G., NB Basu, S Zanardo, PSC Rao, and A Rinaldo, 2010. Climatic, hydrologic and biogeochemical controls on nutrient losses in streams, Water Resources Research, Vol. 46, W08509
  • Bell, I., Groll, E.A., and Braun, J.E., "Performance of vapor compression systems with compressor oil flooding and regeneration," In Press, International Journal of Refrigeration, 2010.
  • Basu, N.B., P.S.C. Rao, H.E. Winzler, P. Owens, and V. Merwade. 2010. Parsimonious modeling of hydrologic responses in engineered watersheds: Structural heterogeneity versus functional homogeneity. Water Resources Research, Vol. 46, W04501
  • Basu, N.B., G. Destouni, J.W. Jawitz, S.E. Thompson, N.V. Loukinova, A. Darracq, S. Zanardo, M. Yaeger, M. Sivapalan, A. Rinaldo, and P.S.C. Rao. 2010. "Nutrient Loads Exported from Managed Catchments Reveal Emergent Biogeochemical Stationarity" (2010GL045168), Geophysical Research Letters, Vol. 37, GL045168
  • B.N. Luna, and A. Irfanoglu, "Estimating Base Shear versus Roof Drift Curves using Earthquake-Response Data", Earthquake Spectra, accepted for publication, 2010.
  • A. Irfanoglu, "Using Numerical Simulations and Engineering Reasoning under Uncertainty: Studying the Collapse of WTC-1", Computer-aided Civil and Infrastructure Engineering, accepted for publication, 2010.
  • Sinfield, J.V., Fagerman, D. and Colic, O. "Evaluation of Sensing Technologies for On-the-Go Detection of Macro-Nutrients in Cultivated Soils," Computers and Electronics in Agriculture, v, 70, n. 1, 1-18, 2010.
  • Sinfield, J.V., Colic, O., Fagerman, D. and Monwuba, C. "A Low-cost Time-resolved Raman Spectroscopic Sensing System Enabling Fluorescence Suppression," Applied Spectroscopy, v. 63, n. 2, 201-210, 2010.
  • 6. Bhargava, A., Anastasopoulos, P., Labi, S., Sinha, K.C., Mannering, F. (2010). A three-stage least squares analysis of time and cost overruns in construction contracts. Accepted for publication, ASCE Journal of Construction Engineering and Management.

    5. Anastasopoulos, P., Labi, S., McCullough, B. (2010). Analyzing Duration and Prolongation of Performance-based Contracts Using Hazard-based Duration and Zero-Inflated Random Parameters Poisson Models, in queue for publication, Transportation Research Record.

    4. Lamptey, G., Singh, L., Labi, S., Sinha, K.C. (2010). Systematic Framework for Incorporating Safety in Network-Level Transportation Planning and Programming, in queue for publication, ASCE Journal of Transportation Engineering.

    3. Anastasopoulos, P., Labi, S., Bhargava, A., Bordat, C., Mannering, F. (2010). Frequency of change orders in highway construction using alternate count-data modeling methods. Accepted for publication in ASCE Journal of Construction Engineering and Management.

    2. Li, Z., Labi, S., Karlaftis, M.G. (2010). Project-level Life-Cycle Cost Analysis Evaluation of Safety Hardware Improvements, Accepted for publication, Transportation Research Record.

    1. Anastasopoulos, P., Labi, S., McCullouch, B., Karlaftis, M. (2010). Influence of Highway Project Characteristics on Contract Type Selection - An Empirical Assessment. Accepted for publication, ASCE Journal of Infrastructure Systems.

  • Oh, J. J., and Sinha, K. C. (2010). Self-financing and distance-based highway pricing scheme: State highway system perspective. Journal of Infrastructure Systems, 17(3), 95-106.
  • Bhargava, A., Anastasopoulos, P. C., Labi, S., Sinha, K. C., and Mannering, F. L. (2010). Three-stage least-squares analysis of time and cost overruns in construction contracts. Journal of construction engineering and management, 136 (11), 1207-1218.
  • W. Song, S.J. Dyke, G.J. Yun and T. Harmon, "Improved Damage Localization and Quantification using Subset Selection", Journal of Engineering Mechanics, ASCE, Vol. 135, No. 6, June 2009, pp. 548-560, (doi 10.1061/(ASCE)EM. 1943-7889.0000005).
  • Tzempelikos, A., Karava, P., Candanedo, L.M., Athienitis, A.K., 2009. Investigation of thermal and airflow conditions near glazed facades using Particle Image Velocimetry and CFD simulation -eliminating the need for secondary perimeter heating systems. ASHRAE Transactions 115(1), 523-537.
  • Stenabaugh, S., Karava, P. 2009. Design wind-loads on residential photovoltaic systems. Canadian Society of Civil Engineers Annual General Conference, St. John's, Canada, May 27-29.
  • Saqan, E.I. and Frosch, R.J., "Influence of Flexural Reinforcement on Shear Strength of Prestressed Beams without Web Reinforcement," ACI Structural Journal, Vol. 106, No. 1, January-February 2009, pp. 60-68.
  • Pujol S., and Sozen, M., "Tests at High Strain Rates of A706 Steel Reinforcing Bars with Mechanical Splices," submitted to Concrete International on 29 September 2009.
  • Pujol S., Smith-Pardo J.P., (2009). "A New Perspective on The Effects of Abrupt Column Removal," Engineering Structures, Vol. 31, No. 4, pp. 869-874.
  • N. Castaneda, S.J. Dyke, C. Lu, F. Sun and G. Hackman, "Experimental Deployment and Validation of a Distributed SHM System Using Wireless Sensor Networks," Journal of Structural Engineering and Mechanics, Techno-Press, Vol. 32; No. 6; August, 2009.
  • Mouriki, E., Karava, P., Park, K-W., Athienitis, A.K., Stathopoulos, T., 2009. Full-scale study of a hybrid ventilation system integrated with an atrium - night cooling potential. 4th Canadian Solar Buildings Conference, Toronto, June 25-27.
  • Malyshkina, N., Mannering, F., Tarko, A., 2009. Markov switching negative binomial models: An application to vehicle accident frequencies. Accident Analysis and Prevention 41(2), 217-226. [PDF]
  • Malyshkina, N., Mannering, F., 2009. Markov switching multinomial logit model: An application to accident-injury severities. Accident Analysis and Prevention 41(4), 829-838. [PDF]
  • L.G. Hector, P.D. Zavattieri, H. Tao and W. Tong, " Mode I fracture in the vicinity of a spot weld in 600 grade dual-phase steel: An application of reverse digital image correlation", Experimental Mechanics, 2009.
  • Karava P., Stathopoulos T., 2009. Internal pressures in buildings with large facade openings. 11th Americas Wind Engineering Conference, Puerto Rico, June 22-26.
  • K.A. Korkmaz, A. Irfanoglu and A. H. Kayhan, "Seismic Risk Assessment of Buildings in Izmir, Turkey," Natural Hazards, September 2009 (online), 2010 (print).
  • K. Miamis, A. Irfanoglu, and M.A. Sozen, "Dominant Factor in the Collapse of WTC-1", Journal of Performance of Constructed Facilities, v.23(4):203-208, 2009.
  • Jovane, M.E., Braun, J.E., and Groll, E.A., "Analysis of a Novel Rotary Compressor: Model Development and Validation," In Review, International Journal of Refrigeration, 2009.
  • Jovane, M.E., Braun, J.E., and Groll, E.A., "Analysis of a Novel Rotary Compressor: Loss Analysis and Improvements," In Review, International Journal of Refrigeration, 2009.
  • J.H. Yan, M.A. Sutton, X. Deng, P. Zavattieri, Z. G. Wei, "Mixed-mode crack growth in ductile thin sheet materials", SEM Annual Conference & Exposition on Experimental and Applied Mechanics, 2009. Albuquerque, New Mexico US, June 1 - 4, 2009.
  • J.-H Yan, M. A. Sutton , X. Deng, Z. Wei and Pablo Zavattieri, "Mixed-mode Crack Growth in Ductile Thin-sheet Materials under Combined In-plane and Out-of-plane Loading", International Journal of Fracture, 2009.
  • Hengeveld, D.W., Braun, J.E., and Groll, E.A., "Optimal Placement of Electronic Components to Minimize Heat Flux Non-Uniformities," In Review, Journal of Spacecraft and Rockets, 2009.
  • Hengeveld, D.W., Braun, J.E., Groll, E.A., Mathison, M.A., and Williams, A. "Review of Modern Spacecraft Thermal Control Technologies", Vol. 16, No. 2, Pages 189-232, HVAC&R Research, 2009.
  • Chin J.C., Rautenberg JM, Ma C.Y.T., Pujol S., and Yau D.K.Y., (2009). "An Experimental Low-cost, Low-data-rate Rapid Structural Assessment Network," IEEE Sensors Journal, Vol. 9, No. 11.
  • C. Sun, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri, "Rate Effects for Mixed-Mode Fracture of Plastically Deforming, Adhesively-Bonded Structures," International Journal of Adhesion and Adhesives, 29, (4), pp. 434-443, 2009.
  • Basu, NB, Rao, PSC, Poyer, IC, Nandy, S, Mallavarupu, M, Naidu, R, Davis, GB, and Patterson, B. 2009. Integration of traditional and innovative characterization techniques for flux-based assessment of dense non-aqueous phase liquid (DNAPL) sites. Journal of Contaminant Hydrology, 105(3-4):161-172.
  • Anastasopoulos, P., Mannering, F., 2009. A note on modeling vehicle-accident frequencies with random-parameters count models. Accident Analysis and Prevention 41(1), 153-159. [PDF]
  • A. Irfanoglu, "Performance of Template School Buildings during Earthquakes in Turkey and Peru", Journal of Performance of Constructed Facilities, v.23(1):5-14, 2009
  • P. Zavattieri, L.H. Hector Jr. V. Savic, J. Fekete, W. Tong "Spatio-temporal characteristics of the Portevin-Le Ch??telier effect in austenitic steel with twinning induced plasticity", International Journal of Plasticity, 10.1016/j.ijplas.2009.02.008, 2009.
  • 9. Anastasopoulos, P., Labi, S., Florax, R., Karlaftis, M.G. (2009). Contracting in Highway Maintenance and Rehabilitation: Are Spatial Effects Important? Accepted for publication, Transportation Research Part A: Policy and Practice.

    8. Irfan, M., Khurshid, M., Anastasopoulos, P., Labi, S., Moavenzadeh, F. (2009). Predicting highway contract duration on the basis of project size and contract type. Accepted for publication in International Journal of Project Management.

    7. Sinha, K.C., Patidar, V., Li, Z., Labi, S. Thompson, P.D. (2009). Establishing the Weights of Performance Criteria - Case Studies in Transportation Facility Management, ASCE Journal of Transportation Engineering, Vol. 135, p. 619-631.

    13. Irfan, M., Bilal, M.K., Labi, S. (2009). Service Life of Thin HMA Overlay Using Different Performance Indicators, Transportation Research Record 2108, p. 37-45.

    12. Bilal, M.K., Irfan, M., Labi, S. (2009). Comparing Methods for Evaluating Pavement Interventions - A Discussion and Case Study, Transportation Research Record 2108, p. 25-36.

    11. Khurshid, M.B., Irfan, M., Labi, S. (2009). An Analysis of the Cost-effectiveness of Rigid Pavement Rehabilitation Treatments. Structure & Infrastructure Engineering: Maintenance, Management, Life-Cycle Design & Performance, Taylor & Francis Group. Accepted for publication.

    10. Irfan, M., Khurshid, M.B., Labi, S., Flora, W. (2009). Evaluating the Cost-effectiveness of Flexible Rehabilitation Alternatives using Different Performance Criteria, ASCE Journal of Transportation Engineering, Volume 135, Issue 10, pp. 753-763.

  • Soliman, A.S.M. and Jacko, R.B. (2008) "A Quantitative Approach to the Traffic Air Quality Problem: The Traffic Air Quality Index," The Journal of the Air and Waste Management Association.
  • P.D. Zavattieri, L.H. Hector Jr., A.F. Bower, "Cohesive zone simulations of crack growth along a rough interface between two elastic plastic solids", Engineering Fracture Mechanics, 75(15), pp. 4309-4332, 2008.
  • Mouriki, E., Karava, P., Park, K-W., Athienitis, A.K., Stathopoulos, T., 2008. Full-scale study of an atrium integrated with a hybrid ventilation system. 3rd Canadian Solar Buildings Conference, Fredericton, August 20-22.
  • Machado, M.*, Liu, J. and Sotelino, ED. (2008) "Modeling Technique for Honeycomb FRP Deck Bridges via Finite Elements," ASCE Journal of Structural Engineering Special Issue dedicated to the 17th Analysis and Computation Conference, April 2008, Vo. 134, Issue 4, pp. 572-580.
  • Lust, E.E., Horton, W.T., and R. Radermacher, "A Review and Cost Comparison of Current Idle-Reduction Technology," ASME Proceedings | Renewable and Advanced Energy Systems, POWER2008-60142, pp. 715-726.
  • Hall, J, Connor, R.J., "The Influence of Baseplate Flexibility on the Fatigue Performance of Welded Socket Connection", Journal of Structural Engineering, American Society of Civil Engineers, Vol. 134, No. 6, June 2008, pp. 911-918.
  • G.J. Yun, K.A. Ogorzalek, S.J. Dyke, and W. Song, "A Two-Stage Damage Detection Approach Based on Subset Selection and Genetic Algorithms," Smart Structures and Systems, Vol. 5 (1), pp. 1-21, 2008.
  • C. Sun, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri, "Rate Effects for Mode-II Fracture of Plastically Deforming, Adhesively-Bonded Structures", International Journal of Fracture, 156, pp. 111-128, 2008.
  • C. Sun, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri "Ductile-brittle transition in the fracture of plastically-deforming adhesively-bonded structures. Part II: Numerical studies" International Journal of Solids and Structures, 45 (17), pp. 4725-4738, 2008.
  • C. Sun, M.D. Thouless, A.M. Waas, J.A. Schroeder, P.D. Zavattieri "Ductile-brittle transition in the fracture of plastically-deforming adhesively-bonded structures. Part I: Experimental studies", International Journal of Solids and Structures, 45 (10), pp. 3059-3073, 2008.
  • Brooks, MC, Wood, AL, Annable, MD, Hatfield, K, Cho, J, Holbert, C, Rao, PSC, Enfield, C, Lynch, K, and Smith, R. 2008. Changes in contaminant mass discharge from DNAPL source mass depletion: Evaluation at two field sites. Journal of Contaminant Hydrology, 102(1-2): 140-153.
  • Basu, NB, Rao PSC, Falta RW, Annable, MD, Jawitz, JW, and Hatfield, K. 2008. Temporal evolution of DNAPL source and contaminant flux distribution: Impacts of source mass depletion. JOURNAL OF CONTAMINANT HYDROLOGY, 95(3-4): 93-109.
  • Anthony, S.D., Johnson, M.W., Sinfield, J.V., Altman, E.J., The Innovator's Guide to Growth - Putting Disruptive Innovation to Work, Harvard Business Press, 2008, 299 p. (translated into Japanese (October 2008), Mandarin (December 2008), and Polish (March 2010)).
  • Anthony, S.D., Johnson, M. W., Sinfield, J.V., "Institutionalizing Innovation," Sloan Management Review, v. 49, n. 2, 45-50, Winter 2008.
  • Irfanoglu, A., and C.M. Hoffmann, "An Engineering Perspective of the Collapse of WTC-I", Journal of Performance of Constructed Facilities. v.22(1):62-67, 2008.
  • "Heat-Straightening Repair of Damaged Steel Bridge Girders - Fatigue and Fracture Performance", R.J. Connor, M.R. Urban, E.J. Kaufmann, NCHRP Report 604, National Cooperative Highway Research Program (NCHRP), Washington, DC, January, 2008.
  • 17. Gkritza K., Sinha, K.C., Labi, S., Mannering, F.L. (2008). Influence of Highway Constr. Projects on Economic Development: An Empirical Assessment. Annals of Regional Science, 42:545-563.

    16. Lamptey, G., Labi, S., Li, Z. (2008). Decision Support for Optimal Scheduling of Highway Pavement Preventive Maintenance within Resurfacing Cycle, in Elsevier Decision Support Systems, Vol. 46, Issue 1, p. 376-387.

    15. Hamideh, A., Oh, J., Labi, S., Mannering, F. L. (2008) Public Acceptance of Local Government Transportation Sales Taxes: A Statistical Assessment, State & Local Government Review 40(3).

    14. Gkritza, K., Labi, S. (2008) Estimating Cost Discrepancies in Highway Contracts: A Multi-Step Econometric Approach, ASCE Journal of Construction Engineering and Management, Vol. 134, Nr. 12, p. 953 - 962.

  • Vivar, Eliana and Haddock, J. E.(2007), "Hot-Mix Asphalt Permeability and Porosity", Journal of the Association of Asphalt Paving Technologists, in press.
  • Tzempelikos, A., Athienitis, A.K., Karava, P., 2007. Simulation of facade and envelope design options for a new institutional building. Solar Energy 81 (9), 1088-1103.
  • Tong, Z., M. Bischoff, L.F. Nies, B. Applegate, and R.F. Turco. 2007. Impact of Fullerene (C60) on a soil microbial community, Environmental Science and Technolog (Accepted).
  • S.J. Dyke, R. Christenson, Z. Jiang, X. Gao and Z. Feinstein, "Tele-operation Tools for Benchscale Shake Tables for Instruction in Earthquake Engineering," Seismological Research Letters, Seismological Society of America, Vol. 78, No. 4, July-August, 2007.
  • Ramirez-Dorronsoro, J-C., Jacko, R. B. and Kildsig, D. O. (2007). "Chargeability Measurements of Selected Pharmaceutical Dry Powders to Assess Their Electrostatic Charge Control Capabilities." AAPS PharmSciTech, 7(4): Article 103.
  • P.D. Zavattieri, L.H. Hector Jr., A.F. Bower, "Determination of the mode-I effective fracture toughness of a sinusoidal interface between two elastic solids", International Journal of Fracture, 145(3), pp. 167-180, 2007.
  • M.A. Sutton, J.Yan, X. Deng. C.-S Cheng, P. Zavattieri, "Three-dimensional digital image correlation to quantify deformation and crack-opening displacement in ductile aluminum under mixed-mode I/III loading", Journal of Optical Engineering, 46(5), 051003, 2007.
  • Hyun, S., Jafvert, C.T., Jenkinson, B., Enfield, C., Johnson, B. "Measuring the flux at the interface of coal-tar impacted sediment and river water near a former MGP site," accepted with for publication in Chemosphere, 2007.
  • H. Tao, W. Tong, L. Hector, P. Zavattieri, "Uniaxial tensile and simple shear behavior of resistance spot welds in dual-phase steel", Journal of Materials Engineering and Performance 17 (4) pp. 517-534. 2007.
  • Griffiths, J.H.P., A. Irfanoglu and S. Pujol, “Istanbul at the Threshold: An Evaluation of the Seismic Risk in Istanbul”, Earthquake Spectra, v.23 (1): 63-75, 2007.
  • Gauthier, J.F.*, Whalen, T.M., and Liu, J. (2007) “Experimental Validation of the Higher Order Derivative Discontinuity Method for Damage Detection,” accepted for publication in Structural Control and Health Monitoring, January 2007.
  • F. Barthelat, H. Tang, P.D. Zavattieri, C-M. Li and H.D. Espinosa, "On the mechanics of mother-of-pearl: A key feature in the material hierarchical structure", Journal of the Mechanics and Physics of Solids, 55(2), pp. 306-337, 2007.
  • Candanedo, L. M., Karava, P., Bessoudo, M., Tzempelikos, A., Athienitis, A. K., Handfield, L. 2007. Airflow and thermal simulation in a controlled test chamber with different heating configurations using CFD modeling. 2nd Canadian Solar Buildings Conference, Calgary, June.
  • Bessoudo, M. , Tzempelikos, A., Candanedo, L. M., Karava, P., Athienitis, A.K., Zmeureanu, R. and Handfield L., 2007. Thermal comfort conditions in highly-glazed perimeter zones with shading devices. 2nd Canadian Solar Buildings Conference, Calgary, June.
  • Karava, P., Tzempelikos, A., Candanedo, L. M., Bessoudo, M., Athienitis, A.K., Handfield, L., 2007. Airflow and heat transfer measurements near a facade with different heating configurations. 2nd Canadian Solar Buildings Conference, Calgary, June.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2007. Wind-driven natural ventilation analysis, Solar Energy 81 (1), 20-30.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2007. Cross-ventilation building design: Application of Particle Image Velocimetry. 12th International Conference on Wind Engineering 2, 1407-1414, Cairns, Australia, July 1-6.
  • Karava, P., Athienitis, A.K., Stathopoulos, T., 2007. Guidelines for sustainable building design through natural ventilation. Canadian Society of Civil Engineers Annual General Conference, Yellowknife, Canada, June 6-9.
  • P. Zavattieri, L. Hector, Jr. and A.F. Bower "Determination of the Effective Mode I Toughness of a Sinusoidal Interface between two Elastic Solids," International Journal of Fracture, 146, (1) 123-124, 2007.
  • Sinfield, J.V., Hemond, H.F., Germaine, J.T., Johnson, B., and Bloch, B., "Contaminant Detection, Identification, and Quantification Using a Microchip Laser Fluorescence Sensor," ASCE Journal of Environmental Engineering, v.133, n. 3, 346-351, 2007.
  • Liu, J. and Karbhari, V.M. (2007) “Performance and Design of Fibre-Reinforced Polymer Composites at Cold Temperatures – Current Status and Future Needs,” International Journal of Materials & Product Technology, Vol. 28, No. 1/2, pp. 1-7.
  • Dunston, P.S., Sinfield, J.V., Lee, T.Y., "Technology Development Decision Economics for Real-time Rolling Resistance Monitoring of Haul Roads," ASCE Journal of Construction Engineering and Management, v. 133, n. 5, 393-402, 2007.
  • 23. Labi, S., Lamptey, G., Kong, S. (2007). Effectiveness of Micro-surfacing Treatments, ASCE Journal of Transportation Engineering Vol. 133, Nr. 5, p. 298-307.

    22. Singh, P., Labi, S., Sinha, K.C. (2007). Cost-effectiveness of Warranty Projects in Indiana, ASCE Journal of Constr. Engineering and Management Vol. 133, Nr. 3, p. 217-224.

    21. Pasupathy, R., Labi, S., Sinha, K.C. (2007). Optimal Reconstruction Periods for Stochastically-Deteriorating Infrastructures, Computer-Aided Civil and Infrastructure Engineering, Vol. 22 (6), p. 389-399.

    20. Fang, C., Labi, S. (2007). Evaluating the Static Segregation Resistance of Hardened Self- Consolidating Concrete using Image Processing Technology, Transportation Research Record 2020, p 1-9.

    18. Oh, J, Labi, S., Sinha, K.C. (2007). Implementation and Evaluation of Self-Financing Highway Pricing Schemes-Numerical Analysis for Indiana, Transportation Research Record 1966, p.25-33.

  • Sreekrishnavilasam, A., Rahardja, S., Kmetz, R. and Santagata, M. (2007), "Soil treatment using fresh and landfilled cement kiln dust", Construction and Building Materials, 21(2) 318-327.
  • Murthy, T., Loukidis, D., Carraro, A., Prezzi, M. and Salgado, R. (2007), "Undrained Monotonic Response of Clean and Silty Sands", Geotechnique, in press.
  • Lee, K., Prezzi, M. and Kim, N. (2007), "Subgrade Design Parameters from Samples Prepared with Different Compaction Methods", Journal of Transportation Engineering, ASCE, in press.
  • Kim, B. and Prezzi, M. (2007), "Evaluation of the Mechanical Properties of Ash", Waste Management, in press.
  • Kim, B. and Prezzi, M. (2007), "Compaction Characteristics and Corrosivity of Fly and Bottom Ash Mixtures", Construction and Building Materials Journal, in press.
  • Fang, H., Hand, A. J., Haddock, J. E. and White, T. D. (2007), "An Object-Oriented Framework for Finite Element Pavement Analysis", Advanced in Engineering Software, in press.
  • Carraro, A. and Prezzi, M. (2007), "A New Slurry-Based Method of Preparation of Specimens of Sands Containing Fines", Geotechnical Testing Journal, in press.
  • Santagata, M. C., Germaine, J. T. and Ladd, C. C. (2007), "Small strain non-linearity of normally consolidated clays", to appear in February 2007 issue of ASCE Journal of Geotechnical and Geoenvironmental Engineering, 133 (1), 72-82.
  • Santagata, M. C. and Kang, Y. I. (2007), "Geologic time effects on the initial stiffness of clays", Journal of Engineering Geology 89 (1-2), 98-111.
  • Salgado, R. and Prezzi, M. (2007),"Computation of Cavity Expansion Pressure and Penetration Resistance in Sands", ASCE International Journal of Geomechanics, in press.
  • Zhang, S., Shan, J., Peterson, J., Li., J. 2006. DEM Generation and Quality Assessment for Glacial Topography: A Case Study in Southern Range, Tasmania. Geomatica, Canadian Institute of Geomatics.
  • Zhai, X., Hua, I., Rao, P. S. C., Lee, L. S., "Co-solvent Enhanced Chemical Oxidation of Perchloroethylene by Potassium Permanganate", Journal of Contaminant Hydrology, 82(1-2), pp. 61-74, 2006.
  • Thomas, S. and Jacko, R.B. (2007). "Model for Forecasting Expressway Fine Particulate Matter and Carbon Monoxide Concentration: Application of Regression and Neural Network," The Journal of the Air and Waste Management Association 2006.
  • Songchitruksa, P. and A. P. Tarko (2006). "The Extreme Value Theory Approach to Safety Estimation", Accident Analysis and Prevention, accepted for publication.
  • Soliman, A.S.M., Jacko, R.B., Palmer,G.M., (2006) "Development of an Empirical Model to Estimate Real-World Fine Particulate Matter Emission Factors: The Traffic-Air-Quality Model". The Journal of the Air and Waste Management Association, volume 56, 1540-1549.
  • Santhanam, M., Cohen, M. D. and Olek, J. (2006), "Differentiating Seawater and Groundwater Sulfate Attack in Portland Cement Mortars", Cement and Concrete Research, Vol. 36, No. 12, pp. 2132-2137.
  • Sampath. A., Shan, J., 2006. Building Boundary Tracing and Regularization from Airborne Lidar Point Clouds. Photogrammetric Engineering and Remote Sensing, Journal of the American Society for Photogrammetry and Remote Sensing.
  • S. Li, M.D. Thouless, A.M. Waas, J. Schroeder, P.D. Zavattieri, "Mixed-mode cohesive-zone models for fracture of an adhesively-bonded polymer-matrix composite", Engineering Fracture Mechanics, 73(1), pp. 64-78, 2006.
  • S. Li, M.D. Thouless, A.M. Waas, J. Schroeder, P.D. Zavattieri, "Competing failure mechanisms in mixed-mode fracture of an adhesively-bonded polymer-matrix composite", International Journal of Adhesion and Adhesives, 26(8), pp. 609-616, 2006.
  • Rochon, Gilbert L., Loring F. Nies, Chad T. Jafvert, Julie A. Stuart, Rabi H. Mohtar, Joseph Quansah, and Akilah Martin, "Education in Sustainable Production in U.S. Universities", Clean Technol. Environ. Policy, 2006 (in press).
  • Rochon, G. L., L.F. Nies, C.T. Jafvert, JA. Stuart, R.H. Mohtar, J. Quansah, and A. Martin. 2006. Education in sustainable production in US universities, Clean Technol. Environ. Policy. 8:38-48.
  • Prabhu, M., Varma, A. H.*, Buch, N., and Thandavesvara, D. (2006) "Experimental Evaluation of Dowel Misalignment on Joint Pullout Behavior," Transportation Research Record: Journal of the Transportation Research Board, recommended for publication, TRB, Washington, D.C.
  • Kang*, N., Hua, I., Xiao, C., "Impacts of Sonochemical Process Variables on Number Average Molecular Weight Reduction of Asphaltene", Industrial and Engineering Chemistry Research, 45(15), pp. 5239-5245, 2006.
  • Hyun, S., Jafvert, C. T., Lee, L.S., and Rao, P.S.C., "Laboratory Studies to Characterize the Efficacy of a Sand Cap Placed over Tar-Contaminated Sediment,”"Chemosphere, 63:1621-1631, 2006.
  • Athienitis, A.K., Kesik, T., Morrison, I.B, Noguchi, M., Tzempelikos, A., Charron, R., Karava, P., Love, J., Harrison, S., Poissant, Y., 2006. Development of requirements for a solar building conceptual design tool. 1st Canadian Solar Buildings Conference, Montreal, August.
  • Ahn, Mi.-Youn., Timothy R. Filley, Chad T. Jafvert, Loring Nies, and Inez Hua, "Birnessite Mediated Debromination of Decabromodiphenyl Ether," Chemosphere, 64:1801-1807, 2006.
  • Ahn, Mi.-Youn., Timothy R. Filley, Chad T. Jafvert, Loring Nies, Inez Hua, and Juan Bezares-Cruz, “Photodegradation of Decabromodiphenyl Ether Adsorbed onto Clay Minerals, Oxides, and Sediment,” Environ. Sci. Technology, 40, 215-220, 2006.
  • Ahn, M.-Y.; Filley, T. R.; Jafvert, C. T.; Nies, L.; Hua, I.; Bezares-Cruz, J., "Photodegradation of Decabromodiphenyl Ether Adsorbed onto Clay Minerals", Metal Oxides, and Sediment, Environ. Sci. Technol. 40(1), pp. 215-220, 2006.
  • Ahn*, M.-Y.; Filley, T. R.; Jafvert, C. T.; Nies, L.; Hua, I.; "Birnessite Mediated Debromination of Decabromodiphenyl Ether", Chemosphere 64(11), 1801-1807, 2006.
  • Pujol, S., Sozen, M. A., and Ramirez. J. A., (2006) "On the Effects of the Quindio Earthquake," EERI Spectra, (in press-accepted for publication).
  • Pujol, S., Sozen, M. A., and Ramirez. J. A., (2006) "Displacement History Effects on Drift Capacity of Reinforced Concrete Columns," ACI Structural Journal, 103(2), 253-262.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2006. Impact of internal pressure coefficients on wind-driven ventilation analysis. International Journal of Ventilation 5(1), 53-66.
  • Karava, P., Athienitis, A.K., Stathopoulos, T., Reardon, J.T., 2006. Modeling of indoor- outdoor air exchange in a multi-unit residential building. 3rd International Building Physics Conference, 697-704, Montreal, Canada, August 27-31.
  • Karava, P., Athienitis, A.K., Reardon, J.T., Stathopoulos, T., 2006. Predicting the pressure regimes and resultant indoor-outdoor air- exchange in a multi-unit residential building. 4th National Building Simulation Conference (eSim), 65-72, Toronto, Canada, May.
  • P. Zavattieri, "Modeling of crack propagation in thin-walled structures with a cohesive model for shell elements", Journal of Applied mechanics, 73(6), pp. 948-958, 2006.
  • Shan, J., Fu, C.S., Li, B., Bethel, J.S., Kretsch, J., Mikhail, E.M., 2006. Principles and Evaluation of Autostereoscopic Photogrammetric Measurement. Photogrammetric Engineering and Remote Sensing, Journal of the American Society for Photogrammetry and Remote Sensing, Vol. 72, No. 4, pp. 365-372.
  • Peeta, S. and Zhou, C. (2006). "Stochastic Quasi-gradient Algorithm for Stochastic Dynamic Traffic Assignment," Transportation Research, 40B, No. 3, pp. 179-206.
  • Jafvert, C. T., Lane, D., Lee, L.S., and Rao, P.S.C. "Partitioning of Mono- and Polycyclic Aromatic Hydrocarbons in River Sediment Adjacent to a Former Manufactured Gas Plant Site", Chemosphere, 62:314-321, 2006.
  • Sukumaran, Praveen, Hong, TaeHoon, Bayraktar, Mehmet Emre, and M. Hastak (2006). "Validation of a Model for Predicting Schedule Changes in Highway Work Zones-Case Studies." Paper accepted for publication in the ASCE Journal of Transportation Engineering.
  • Sukumaran, Praveen, Bayraktar, Mehmet Emre, Hong, TaeHoon, and M. Hastak (2006). "Model for Analysis of Factors Effecting Construction Schedule in Highway Work Zones." Paper accepted for publication in the ASCE Journal of Transportation Engineering.
  • Jeong, Jae, M. Hastak, and Syal, Matt. (2006). "Supply Chain Analysis and Modeling for the Manufactured Housing Industry." Paper accepted for publication in the March 2006 issue of the ASCE Journal of Urban Planning and Development.
  • Bayraktar, Mehmet Emre, Cui, Quingbin, M. Hastak, and Minkarah, Issam (2006). "An Evaluation of Warranty Contracting in United States." Canadian Journal of Civil Engineering. Vol. 33, No.1 January 2006, pp1-9
  • Banerjee, D.,* Syal, M. and M. Hastak (2006). "Material Flow Based Facility Layout Analysis of Manufactured Housing Production Plant." Paper accepted for publication in the ASCE Journal of Architectural Engineering.
  • Ahn, M-Y., T.R. Filley, C.T. Jafvert, L. F. Nies, I. Hua, and J. Bezares-Cruz. 2006. Photodegradation of Decabromodiphenyl Ether Adsorbed onto Clay Minerals, Metal oxides and Sediment. Environmental Science and Technology. 40:215-220.
  • 25. Labi, S. and Rodriguez, M. M., Sinha, K.C. (2006). Assessing Preservation Needs for a Bridge Network: A Comparison of Alternative Approaches, Structure & Infrastructure Engineering: Maintenance, Management, Life-Cycle Design & Performance, Taylor & Francis Group, Oct 28 Issue, p. 1-15. 24. Rodriguez M. M., Labi, S., Li, Z. (2006). Enhanced Bridge Replacement Cost Models for Indiana's Bridge Management System, Transportation Research Record 1958, p. 13-23.

  • Kowalkowski, K.* and Varma, A. H. (2006) "Structural Properties of Steels Subjected to Multiple Cycles of Damage Followed by Heating Repair," Journal of Structural Engineering, tentatively accepted for publication, ASCE.
  • Yang, Z., Weiss, W. J. and Olek, J. (2006), "Water Transport in Concrete Damaged by Tensile Loading and Freeze-Thaw Cycling", ASCE Journal of Materials in Civil Engineering, 18(3), pp. 424-434.
  • Sreekrishnavilasam, A., King, S., Santagata, M. (2006), "Characterization of fresh and landfilled cement kiln dust for reuse in construction applications", Journal of Engineering Geology 85 (1-2), 163-173.
  • Qi, C., Weiss, W. J., Wang, H. and Olek, J. (2006), "Quantifying the Impact of Plastic Shrinkage Cracking in the Corrosion of Reinforced Concrete to Improve Service Life Prediction", Proceedings of the 6th ISCC and CANMET ACI International Symposium on Concrete Technology for Sustainable Development, September 19-22, Xi'an China, pp. 1325-1335.
  • Peethamparan, S., Olek, J. and Helfrich, K. E. (2006), "Evaluation of the Engineering Properties of Cement Kiln Dust (CKD) Modified Kaolinite Clay", Proceedings, the Twenty-First International Conference on Solid Waste Technology and Management, March 26-29, Philadelphia, Widener University, PA, pp. 997-1006.
  • Neithalath, N., Weiss, W. J. and Olek, J. (2006), "Characterizing Enhanced Porosity Concrete using Electrical Impedance to Predict Electrical and Hydraulic Performance", Cement and Concrete Research, 36(11), pp. 2074-2085.
  • Murthy, T. G., Loukidis, D., Carraro, J.A.H., Prezzi, M. and Salgado, R. (2006), "Undrained Monotonic Response of Clean and Silty Sands", Geotechnique, in press.
  • Foye, K., Scott, B. and Salgado, R. (2006), "Resistance Factors for Use in Shallow Foundation LRFD", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1208-1218.
  • Foye, K., Scott, B. and Salgado, R. (2006), "Assessment of Variable Uncertainties for Reliability-Based Design of Foundations", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(9), 1197-1207.
  • Deshpande, Y. S. and Olek, J. (2006), "Development of Rapid-Setting Self-Consolidating Concrete Using Small Size Aggregate", Proceedings of the 2nd International RILEM Symposium on Advances in Concrete through Science and Engineering, Sept. 11-13, Quebec, Canada.
  • Santagata, M. C., Sinfield, J. V. and Germaine, J. T. (2006), "Laboratory simulation of field sampling: comparison with ideal sampling and field data", Journal of Geotechnical and Geoenvironmental Engineering, 132 (3), 351-362.
  • Salgado, R. and Prezzi, M. (2006), "Computation of Cavity Expansion Pressure and Cone Resistance in Sand", International Journal of Geomechanics, ASCE, in press.
  • Zhang, P., Peeta, S., and Friesz, T. (2005). "Dynamic Game Theoretic Model of Multi-Layer Infrastructure Networks," Networks and Spatial Economics, Vol. 5, No. 2, pp. 147-178.
  • Yoon, J.S., Shan, J., 2005. Combined Adjustment of MOC Stereo Imagery and MOLA Altimetry Data. Photogrammetric Engineering and Remote Sensing, Special Issue on Mapping Mars, Journal of the American Society for Photogrammetry and Remote Sensing, Vol. 71, No. 10, pp. 1179 ? 1186.
  • Yang, K.J., Jacko, R.B. and Sun, Wen-Yih (2005). "Regional Climate-Chemistry Model Simulations of Troposheric Ozone- Part I: Model Formulation and Evaluation". Atmospheric Environment.
  • Thomas, S., Bullock, D. and Jacko, R.B. (2007) "Model for Estimating Mobile Emissions During Expressway Incidents", The Journal of the Air and Waste Management Association.
  • Soliman, Ahmed and Jacko, R.B. (2005). "Development of an Empirical Model to Estimate Real-World PM2.5 Emission Factors; The Traffic-Air-Quality Model", The Journal of the Air and Waste management Association.
  • Smaglik, E., D.M. Bullock, T. Urbanik, and D. Bryant "Evaluation of Flow Based Traffic Signal Control Using Advanced Detection Concepts," Transportation Research Record, TRB, National Research Council, Washington, DC, TRB Paper ID# 06-1143, submitted July 2005, accepted for publication February 2006.
  • Shelby, A.., D.M. Bullock, and D. Gettman, "Transition Methods in Traffic Signal Control," Transportation Research Record, TRB, National Research Council, Washington, DC, TRB Paper ID# 06-2762, submitted July 2005, accepted for publication February 2006.
  • Sharma, A.., D.M. Bullock, and S. Peeta, "Limitations of Simultaneous Gap Out Logic," Transportation Research Record, TRB, National Research Council, Washington, DC, TRB Paper ID# 06-1309, submitted July 2005, accepted for publication February 2006.
  • Savolainen, P. and A.P. Tarko (2005). "Safety Impacts at Intersections on Curved Segments", Transportation Research Record, Journal of the Transportation Research Board, No. 1908, pp. 130-140.
  • S. Li, M.D. Thouless, A.M. Waas, J. Schroeder, P.D. Zavattieri, "Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer???matrix composite", Composites Science and Technology, 65(3-4), pp. 537-549, 2005.
  • S. Li, M.D. Thouless, A.M. Waas, J. Schroeder, P.D. Zavattieri, "Use of Mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite", Composites Science and Technology, 65(2), pp. 281-293, 2005.
  • Perez-Cartagena, R. and A.P. Tarko (2005). "Calibration of Capacity Parameters for Signalized Intersections in Indiana", ASCE Journal of Transportation Engineering, pp. 904-911.
  • Nichols, A. and D. Bullock, "Automatic Speed Calibration Methodology for Traffic Monitoring Sites," Journal of Transportation Engineering, ASCE, Vol 132, No. 1, pp. 30-39, January 2006.
  • Kowalkowski, K. and Varma, A. H. (2005) "Experimental Investigations of the Effects of Multiple Damage-Heat Straightening Repair Cycles on the Structural Properties of Bridge Steels." Transportation Research Board, recommended for publication, TRB, Washington, D.C.
  • Kidarsa, R., T. Pande, S.V. Vanjari, J.V. Krogmeier, and D. Bullock, "Design Considerations for Detecting Bicycles with Inductive Loop Detectors," Transportation Research Record, TRB, National Research Council, Washington, DC, TRB Paper ID# 06-0326, submitted July 2005, accepted for publication February 2006.
  • Kang, N., Hua., I., Rao, P. S. C., "Enhanced Fenton's Destruction of Non-aqueous Phase Perchloroethylene in Soil Systems", accepted for publication in Chemosphere (available on-line November 30, 2005).
  • J. Ham, Y. Chen, M. M. Crawford, and J. Ghosh, "Investigation of the Random Forest Framework for Classification of Hyperspectral Data," IEEE Trans. on Geoscience and Remote Sensing, vol. 43, no. 3, 492-501, 2005.
  • Irizarry, J., K. Simonsen, and D. M. Abraham. (2005). Effect of Safety and Environmental Variables on Task Durations in Steel Erection. ASCE Journal of Construction Engineering Management.
  • Garcia, C., R. Huebschman, D. Abraham, and D. Bullock, "Using GPS to Measure the Impact of Construction Activities on rural Interstates," Journal of Construction Engineering and Management, Vol. 132, No. 5, pp. 508-515, May 2006.
  • Figueroa, A. and A.P. Tarko (2005). "Speed Factors on Two-Lane Rural Highways in Free-Flow Conditions", Transportation Research Record, Journal of the Transportation Research Board, No. 1912, pp. 39-46.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2005. Wind-driven flow through building openings: a wind tunnel study. 20th Canadian Conference of Applied Mechanics (CANCAM), Montreal, Canada, May 30-June 2.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2005. Wind-driven flow through building openings. 1st International Conference on Passive and Low Energy Cooling (PALENC) for the Built Environment, Santorini, Greece, May 18-20.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2005. Contribution to natural ventilation design. 2nd International Natural Ventilation Workshop, Tokyo, Japan, November.
  • Varma, A. H., Sause, R., Ricles, J.M., and Qinggang, L. (2005) "Development and Validation of Fiber Models for High Strength Square CFT Beam-Columns." ACI Structural Journal, American Concrete Institute, 102, 1, 73-85, Farmington Hills, MI.
  • Tarko, A.P. and R. Perez-Cartagena (2005). "Variability of Peak Hour Factor at Intersections", Transportation Research Record, Journal of the Transportation Research Board, No. 1920, pp. 125-130.
  • Shan, J., Sampath, A., 2005. Urban DEM Generation from Raw Lidar Data: A Labeling Algorithm and its Performance. Photogrammetric Engineering and Remote Sensing, Journal of the American Society for Photogrammetry and Remote Sensing, Vol. 71, No. 2, pp. 217-226.
  • Shan, J., Lee, D.S., 2005. Quality of Building Extraction from IKONOS Imagery. Journal of Surveying Engineering, American Society of Civil Engineers, February, Vol. 31, No. 1, pp.27-32.
  • Peeta, S., Zhang, P. and Zhou, W. (2005). "Behavior-based Analysis of Freeway Car-truck Interactions and Related Mitigation Strategies," Transportation Research, 39B, No. 5, pp. 417-451.
  • Peeta, S. and Yu, J.W. (2005). "A Hybrid Model for Driver Route Choices Incorporating En-Route Attributes and Real-Time Information Effects," Networks and Spatial Economics, Vol. 5, No. 1, pp. 21-40.
  • "Inspection and Management of Bridges with Fracture-Critical Members", R.J. Dexter, R.J. Connor, H.N. Mahmoud, National Cooperative Highway Research Program, NCHRP Synthesis Report 354, National Academy Press, Washington D.C., to be published in 2005.
  • Wang, Xiangyu, and Dunston, P. S. (accepted May 2005). "Human Factor Issues in Augmented Reality System for AEC: An Experimental Prototype Study," to Automation in Construction, Elsevier.
  • Shin, Do Hyoung, Dunston, P. S., and Wang, Xiangyu (2005). "View Changes in Mixed Reality-based Collaborative Virtual Environments," ACM Journal Transactions on Applied Perception, Association for Computing Machinery (ACM), Vol. 2, No. 14.
  • P.F. Mlakar, D.O. Dusenberry, J. R. Harris, G. Haynes, L.T. Phan and M.A. Sozen, "Toughness of the Pentagon Structure," Journal of Performance Constructed Facilities, 19 (3), August 2005, 206-211.
  • P.F. Mlakar, D.O. Dusenberry, J. R. Harris, G. Haynes, L.T. Phan and M.A. Sozen, "Response to Fire Exposure of the Pentagon Structural Elements," Journal of Performance Constructed Facilities, 19 (3), August 2005, 212-219.
  • P.F. Mlakar, D.O. Dusenberry, J. R. Harris, G. Haynes, L.T. Phan and M.A. Sozen, "Description of Structural Damage Caused by the Terrorist Attack on the Pentagon," Journal of Performance Constructed Facilities, 19 (3), August 2005, 197-205.
  • P.F. Mlakar, D.O. Dusenberry, J. R. Harris, G. Haynes, L.T. Phan and M.A. Sozen, "Conclusions and Recommendations from the Pentagon Crash," Journal of Performance Constructed Facilities, 19 (3), August 2005, 220-221.
  • Mehrotra, N., M. Syal, and M. Hastak. (2005). "Manufactured Housing Production Layout Design." Paper scheduled for publication in the March 2005 issue of the ASCE Journal of Architectural Engineering.
  • Arabi, R.S., R.S. Govindaraju, M.M. Hantush, B. Engel (2005). "Role of watershed discretization on evaluation of long-term impact of best management practices on water quality." Accepted, Journal of American Water Resources Association, 40 pp.
  • Arabi, M., J.S. Schmidt, and R.S. Govindaraju (2005). "A process-based transfer function approach to model tile drain hydrographs." Accepted, Hydrological Processes, 30 pp.
  • Arabi, M., R.S. Govindaraju, and M.M. Hantush (2005), Spatial Scale Issues for Long-Term Modeling of Water and Dissolved Components in Watersheds, to appear in Physical Models of River Basin Runoff and Their Applications to Ungauged Basins, ed. Enda O'Connell, Kluwer Academic, 17 pages.
  • Arabi, M., R.S. Govindaraju, M. Sophocleous, and J.K. Koelliker (2005), Use of Distributed Models for Watershed Management: Case Studies, to appear in Watershed Models, ed. V.P. Singh, and D. Frevert, CRC Press, 20.1-20.21.
  • Govindaraju, R.S., C. Corradini, R. Morbidelli, and N. Nahar (2005), Infiltration and Run-on under Spatially Variable Hydrologic Properties, to appear in Handbook of Groundwater Engineering, ed. J.W. Delleur, CRC Press, 8.1-8.16.
  • Dunston, P. S., Gambatese, John A., McManus, James F. (2005). "Assessing State Transportation Agency Constructability Implementation," Journal of Construction Engineering and Management, ASCE.
  • Dunston, P. S. and Wang, Xiangyu (2005). "Mixed Reality-Based Visualization Interfaces for the AEC Industry." Journal of Construction Engineering and Management, ASCE, to appear in December. ASCE.
  • Lee, J. H., Salgado, R. and Kim, S. I. (2005). "Normalized Bearing Capacity of Footings using State-Dependent Finite Element Analysis." Computers and Geotechnics, 32(7), 445-457.
  • Lee, J. H. and Salgado, R. (2005). "Estimation of Footing Bearing Capacity in Sands based on CPT." Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(4), 442-452.
  • Kestler, Maureen A., Berg, Richard L. and Haddock, John E. (2005), “Can Spring Load Restrictions on Low-Volume Roads Be Shortened Without Increasing Road Damage?” Transportation Research Record, Journal of the Transportation Research Board, No. 1913, Transportation Research Board, National Research Council, pp. 126-136.
  • Haddock, John E., Hand, Adam J.T., Fang, Hongbin and White, Thomas D. (2005), "Determining Layer Contributions to Rutting by Surface Profile Analysis", Journal of Transportation Engineering, American Society of Civil Engineers, Vol. 131 (2), pp. 131-139.
  • P.D. Zavattieri, "Modeling of crack propagation in thin-walled structures", Mec??nica Computacional, Vol. XXIII, G. Buscaglia, E. Dari, O.Zamonsky (Eds.) XIV Congress on Numerical Methods and their Applications ENIEF 2004, to be held in S. C. de Bariloche, Nov. 8-11, 2004. (Invited Key Talk by P.D. Zavattieri).
  • Lee, C., and J. S. Bethel. (2004), "Extraction, Modeling, and Use of Linear Features for Restitution of Airborne
  • Hult, E.L., C.D. Troy, and J.R. Koseff (2011) "The mixing efficiency of interfacial waves breaking at a ridge. Part II: Local Energetics." Journal of Geophysical Research, VOL. 116, C02004, doi:10.1029/2010JC006488.
  • Hoshizaki, T., D. Andrisani, A. Braun, A. Mulyana, and J. S. Bethel. (2004) "Performance of Integrated
  • Bose, Amica and J. D. Fricker, "Reverse-Engineered Land Use Patterns to Minimize Congestion", Transportation Research, Record No. 1831, January 2004, p. 141-149.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2005. Natural ventilation openings: a discussion of discharge coefficients. 16th World Building Congress (CIB 2004) and the 5th International Conference of Indoor Air Quality, Ventilation and Energy Conservation, Toronto, Canada, May 2-7.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2004. Wind-driven flow through openings: Review of discharge coefficients. International Journal of Ventilation 3(3), 255-266.
  • Varma, A. H., Ricles, J.M., Sause, R., and Ream, A. (2004) "Seismic Behavior and Design of High Strength Square Concrete Filled Steel Tube Beam-Columns," Journal of Structural Engineering, ASCE, 130, 2, 169-179.
  • Tarko, A. P. and M. Kanodia (2004). "Effective and Fair Identification of Hazardous Locations", Transportation Research Record, Journal of the Transportation Research Board, No. 1897, pp. 64-70.
  • Ramirez, J.A., Olek, J. and Malone, B., (2004) "Shear Strength of Lightweight Reinforced Concrete Beams," American Concrete Institute, Special Publication: High-Performance Structural Lightweight Concrete, SP-218,69-90.
  • Mesarch, M., C.H. Nakatsu, and L. F. Nies. 2004. Bench-Scale and Field-Scale Evaluation of Catechol 2,3-Dioxygenase Specific Primers for Monitoring Bioremediation. Water Research. 38:1281-1288.
  • Chung, T., D. M. Abraham, and S. Gokhale. (2004). Decision Support Systems for Microtunneling Applications, ASCE Journal of Construction Engineering and Management.
  • Abraham, D., C. Fuentes, and D. M. Abraham. (2004). Web-Based Bidding in Construction: Using Simulation as an Evaluation Tool. International Journal of Electronic Business.
  • Lyn, D. A. (2004). "Steady and unsteady simulations of turbulent flow and transport in ultraviolet disinfection channels", ASCE J. Hydraulic Engineering, 130, no. 8, August, pp. 762-770.
  • Abraham, D. M., J. D. McGlothlin, D. W. Halpin, and J. Hinze. (2004). Construction Safety Alliance - Examining Causes of Construction Injuries and Defining Best Practices That Improve Safety Performance. Construction Information Quarterly, Chartered Institute of Building, Ascot, U.K.
  • Whalen, T.M., Savage, G.T., and Jeong, G.D., (2004), "An Evaluation of the Self-Determined Probability-Weighted Moment Method for Estimating Extreme Wind Speeds," Journal of Wind Engineering and Industrial Aerodynamics, Vol. 92, pp. 219-239.
  • Sivasubramaniam, Sivaranjan, Galal, Khalad, Noureldin, A. Samy, White, Thomas D. and Haddock, John E. (2004), "Laboratory,Proto-type, and In-Service Accelerated Pavement Testing to Model Permanent Deformation", Transportation Research Record, Journal of the Transportation Research Board, No. 1896, Transportation Research Board, National Research Council, pp. 189-198.
  • Fang, H., Haddock, J. E., White, T. D., Hand, A. J. (2004), "On the Characterization of Flexible Pavements Rutting Using Creep Model Based Finite Element Analysis", Finite Elements in Analysis and Design, Vol. 41 (1), pp. 49-73.
  • Engineering and Remote Sensing, Vol. 69, No. 2, February, 2003, pp. 143-150.

    Kelley K, Stenson S, Dey R, Whelton AJ. 2014. Release of Drinking Water Contaminants and Odor Impacts Caused by Green Building Cross-Linked Polyethylene (PEX) Plumbing Systems. Water Research. 67 (15), 19–32.

  • Lee, S., J. Shan, and J. S. Bethel. (2003) "Class-Guided Building Extraction from IKONOS Imagery", Photogrammetric
  • Hult, E.L., C.D. Troy, and J.R. Koseff (2011) "The mixing efficiency of interfacial waves breaking at a ridge. Part I: Overall mixing efficiency." Journal of Geophysical Research, Journal of Geophysical Research, VOL. 116, C02003, doi:10.1029/2010JC006485.
  • H.D. Espinosa and P.D. Zavattieri, "A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part II: Numerical examples", Mechanics of Materials, 35(3-6), pp. 365-394, 2003.
  • H.D. Espinosa and P.D. Zavattieri, "A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part I: Theory and numerical implementation", Mechanics of Materials, 35(3-6), pp. 333-364, 2003.
  • Elaksher, A., J. S. Bethel, and E. Mikhail. (2003) "Roof Boundary Extraction Using Multiple Images", Photogrammetric
  • E.M. Rathje, M.M. Crawford, K. Woo, and A. Neuenschwander, "Damage Patterns from Satellite Images from the 2003 Bam, Iran Earthquake," Earthquake Spectra, Earthquake Engineering Research Institute), in press.
  • Karava, P., Stathopoulos, T., Athienitis, A.K., 2003. Investigation of the performance of trickle ventilators. Building and Environment 38 (8), 981-993.
  • Whalen, T., S. Gopal and D. M. Abraham. (2003). A Cost-Benefit Model for the Construction of Tornado Shelters. ASCE Journal of Construction Engineering and Management.
  • P.E. Mlakar, D.O. Dusenberry, J.R. Harris, G.F. Haynes, L.T. Phan, and M.A. Sozen, "The Pentagon Building Performance Report", American Society of Civil Engineers, Reston, VA, 2003, 75p.
  • Baldwin, B.R., C.H. Nakatsu, and L. F. Nies. 2003. Detection and Enumeration of Aromatic Oxygenase Genes by Multiplex and Real-time PCR. Applied and Environmental Microbiology, 69:3350-3358.
  • Arboleda, C.and D. M. Abraham. (2003). Fatalities in Trenching Operations, Analysis using Models of Accident Causation. ASCE Journal of Construction Engineering and Management.
  • Systems
    , Vol. 62, No. 1, ACSM, March 2002, pp. 55-56.
  • Zayed, Tarek M., Chang, Luh-Maan, and Fricker, J. D., "Life Cycle Cost Based Maintenance Plan for Steel Bridge Protection Systems," Journal of Performance of Constructed Facilities, American Society of Civil Engineers, Vol. 16, No. 2, p. 55-62, May 2002.
  • Zayed, Tarek M., Chang, Luh-Maan, and Fricker, J. D., "LCCA Using Deterministic and Stochastic Methods: Conflicting Results," Journal of Performance of Constructed Facilities, American Society of Civil Engineers, Vol. 16, No. 2, p. 63-74, May 2002.
  • Zayed, Tarek M., Chang, Luh-Maan, and Fricker, J. D., "A Statewide Performance Function for Steel Bridge Protection Programs," Journal of Performance of Constructed Facilities, American Society of Civil Engineers, Vol. 16, No. 2, p. 46-54, May 2002.
  • P.D. Zavattieri and H.D. Espinosa, "An examination of the competition between bulk behavior and interfacial behavior of ceramics subjected to dynamic pressure-shear loading", Journal of the Mechanics and Physics of Solids, 51(4), pp. 607-635, 2002.
  • Gupta, Rajeev, J. D. Fricker, and David P. Moffett, "Video License Plate Data Reduction", Transportation Research, Record No. 1804, November 2002, p. 31-38.
  • Karava, P., Athienitis, A.K., Stathopoulos, T., 2002. Simulation of the performance of trickle ventilators. 3rd National Building Simulation Conference (eSim), Montreal, Canada, September.
  • Karava, P., Athienitis, A.K., Stathopoulos, T., 2002. Experimental investigation of the performance of trickle ventilators. 4th International Hybrid Ventilation Conference, Montreal, Canada, May.
  • Varma, A.H. , Ricles, J.M., Sause, R., and Lu, L.W. (2002). "Seismic Behavior and Modeling of High Strength Composite Concrete Filled Steel Tube Beam-Columns," Journal of Constructional Steel Research, Elsevier Applied Science, Volume 58, Issue 5-8, pp. 725-758.
  • Jonasson, Snaebjorn, Dunston, P. S., Ahmed, Kamal, and Hamilton, Jeff. (2002). "Factors in Productivity and Unit Cost for Advanced Machine Guidance," Journal of Construction Engineering and Management, ASCE.
  • Lyn, D. A. and Altinakar, M. (2002). "The St-Venant-Exner equations for near-critical and trans-critical flows", ASCE J. Hydraulic Engineering, 128, no. 6, pp. 579-587.
  • Whalen, T.M., Savage, G.T., and Jeong, G.D., (2002).  "The Method of Self-Determined Probability Weighted Moments Revisited," Journal of Hydrology, Vol. 268, pp. 177-191.
  • Yang, C.Y. David and J. D. Fricker, "Using Human Information Processing Principles to Design Advanced Traveler Information Systems", Transportation Research, Record 1759, January 2001, p. 1-8.
  • Wood, S.M., Akinci, N.O., Liu, J., and Bowman, M.D. (2006). "Analysis and Instrumentation of a Steel Bridge for Investigating the Effects of Superloads". Transportation Research Board, Accepted to Publication.
  • Wood, S.M., Akinci, N.O., Liu, J. and Bowman, M.D. (2006) “Analysis and Instrumentation of a Steel Bridge for Investigating the Effects of Superloads,” Transportation Research Record, 06-1903, No. 1976, pp. 95-103.
  • Parr, M.J., Connor, R.J., and Bowman, M.D. (2009). "A Proposed Method for Determining the Interval for Hands-On Inspection of Steel Bridges with Fracture Critical Members," Journal of Bridge Engineering, ASCE, Accepted for publication.
  • P.D. Zavattieri and H.D. Espinosa, "Grain level analysis of crack initiation and propagation in brittle materials", Acta Materialia, 49, pp. 4291-4311, 2001.
  • P.D. Zavattieri and H.D. Espinosa, "Grain level analysis of ceramic microstructures subjected to impact loading", Ceramic Transactions pp. 349-360. 4-8, the Proceedings of Ceramic Armor Materials by Design Symposium, PACRIM IV, An International Conference on Advanced Ceramics and Glasses, November 4-8, Wailea, Maui, Hawaii, Nov. 2001.
  • P.D. Zavattieri, P.V. Raghuram and H.D. Espinosa, "A computational model of ceramic microstructures subjected to multi-axial dynamic loading", Journal of the Mechanics and Physics of Solids, 49(1), pp. 27-68, 2001.
  • Li, X., Whalen, T.M. and Bowman, M.D. (2005). "Fatigue Strength of Double-Mastarm Sign Structures for Natural Wind," Transportation Research Record, National Research Council; No. 1928.
  • Lee, C., and J. S. Bethel. (2001) "Georegistration of Airborne Hyperspectral Image Data", IEEE Transactions
  • H.D. Espinosa, H-C. Lu, P.D. Zavattieri, and S. Dwivedi, "A 3-D finite deformation anisotropic visco-plasticity model for fiber composites", Journal of Composite Materials, 35(5), pp. 369-409, 2001.
  • Chotickai, P. and Bowman, M.D. (2006). "Truck Models for Improved Fatigue Life Predictions of Steel Bridges," Journal of Bridge Engineering, ASCE, 11(1); 71-80.
  • Chotickai, P. and Bowman, M.D. (2006). "Comparative Study of Fatigue Provisions for the AASHTO Fatigue Guide Specifications and the LRFD Manual for Evaluation," Journal of Bridge Engineering, ASCE, Submitted and under re-review.
  • Barth, A.S. and Bowman, M.D. (2001). "Fatigue Behavior of Welded Diaphragm-to-Beam Connections." Journal of Structural Engineering, ASCE 27(10); 1145-1152.
  • Akinci, N.O., Liu, J., and Bowman, M.D. (2008). "Parapet Strength and Contribution to Live Load Response for Superload Passages," Journal of Bridge Engineering, ASCE, 13(1); 55-63.
  • Akinci, N.O.*, Liu, J. and Bowman, M.D. (2008) "Parapet Strength and Contribution to Live Load Response for Superload Passages," ASCE Journal of Bridge Engineering, January/February 2008, Vol. 13, Issue 1, pp. 55-63.
  • Horton, W.T., and E.A. Groll, "Analysis of a Medium-Temperature Secondary Loop Refrigerating System," ASHRAE Transactions, Vol. 107, Pt. 2, 2001, pp. 459-465.
  • P.F. Mlakar, D.O. Dusenberry, J. R. Harris, G. Haynes, L.T. Phan and M.A. Sozen, "September 11, 2001, Airliner Crash into the Pentagon", Journal of Performance Constructed Facilities, 19 (3), August 2005, 189-196.
  • Lee, C., H. Theiss, J. S. Bethel, and E. Mikhail. (2000) "Rigorous Mathematical Modeling of Airborne Pushbroom
  • Swett, Geoffrey D., Stanton, John F. and Dunston, P. S. (2000). "Methods for Controlling Stresses and Distortions in Stage Constructed Steel Bridges," in Transportation Research Record 1712, Transportation Research Board of the National Research Council.
  • Lyn, D. A. (2000). "Regression residuals and mean profiles in uniform open-channel flows", ASCE J. Hydraulic Engineering, 126, no. 1, pp. 24-32.
  • P.D. Zavattieri and H. D. Espinosa, "Ballistic penetration of multi-layered ceramic/steel targets", poster presented at the APS Meeting on Shock Wave and Condensed Matter, Snowbird, UT, June 27 to July 2, 1999. Proceedings, pp. 1117-1120, (Poster presented by P.D. Zavattieri).
  • H.D. Espinosa and P. D. Zavattieri, "Modeling of ceramic microstructures: dynamic damage initiation and evolution", Invited paper presented at the APS Meeting on Shock Wave and Condensed Matter, Snowbird, UT, June 27 to July 2, 1999, Proceedings, pp. 333-338. (Invited Key Talk given by P.D. Zavattieri).
  • Beck, J.L., E. Chan, A. Irfanoglu and C. Papadimitriou, "Multi-criteria Optimal Structural Design under Uncertainty", Earthquake Engineering and Structural Dynamics, 28:741-761, 1999.
  • Keskar, J. and Lyn, D. A. (1999). "Computations of laminar incompressible backward-facing step flow at Re = 800 with a spectral domain decomposition method", International J. for Numerical Methods in Fluids, 29 (4), Feb. 28, pp. 411-427.
  • H.D. Espinosa, S. Dwivedi, P. D. Zavattieri and G. Yuan, "Numerical investigations of penetration in multilayered material/structure systems", International Journal of Solids and Structures, 35(22), pp. 2975-3001, 1998.
  • H.D. Espinosa, P. D. Zavattieri and S. Dwivedi, "A finite deformation continuum/discrete model for the description of fragmentation and damage in brittle materials", Journal of the Mechanics and Physics of Solids, 46(10), pp. 1909-1942, 1998.
  • H.D. Espinosa, P. D. Zavattieri and G. L. Emore, "Adaptive FEM Computation of geometric and material nonlinearities with application to brittle failure", special issue of Mechanics of Materials edited by H.D. Espinosa and R.J. Clifton, 29, pp. 275-305, 1998.
  • "Fatigue Design of Modular Bridge Expansion Joints", R.J. Dexter, R.J. Connor, M.R. Kaczinski, NCHRP Report 402, National Cooperative Highway Research Program (NCHRP), Washington, DC, January, 1998.
  • N.S. Brar, H. D. Espinosa, G. Yuan and P. D. Zavattieri, "Experimental study of interface defeat in confined ceramic targets", Shock Compression of Condensed Matter-1997, edited by S.C. Schmidt, D.P. Dandekar and J.W. Forbes, pp. 497-500, Amherst, MA, July 27- Aug. 1, 1997.
  • H.D. Espinosa, H-C. Lu, S. Dwivedi and P. D. Zavattieri, "A finite deformation anisotropic plasticity model for fiber reinforced composites", in Proc. of 12th Annual Technical Conf. of the American Society for Composites, edited by Ronald F. Gibson and Golam M. Newaz, pp. 429-441, Dearborn, MI, 1997.
  • H.D. Espinosa, G. Yuan, S. Dwivedi and P. D. Zavattieri, "Numerical study of penetration in ceramic targets with a multiple-plane model", Proc. of 97 APS topic Conf. of Shock Compression of Condensed Matter-1997, edited by S.C. Schmidt, D.P. Dandekar and J.W. Forbes, pp. 901-904, Amherst, MA, July 27 - Aug. 1, 1997.
  • G.C. Buscaglia, E. A. Dari and P. D. Zavattieri, "Mesh optimization: Some results in 3D elasticity", Elasticite, Viscoelasticite; et Controle Optimal, ESAIM: Proc. 2, pp. 1-16. Lyon, France, 1997.
  • Zevgolis, I. E. and Bourdeau, P. L. (2006), "System Reliability of Cantilever Retaining Walls with Correlated Failure Modes", Proceedings, ASCE, Geo-Institute Geocongress, Atlanta, Feb. 26-March 1, 2006. Publication on CD Rom.
  • Lee, S. H. and Bourdeau, P. L. (2006), "Filter Performance and Design for Highway Drains", Final Report, FHWA/IN/JTRP-2005/1, May, 204 p.
  • Bourdeau, P. L. and Zevgolis, I. E. (2005), "Correlations entre modes de ruine dans l'analyse de fiabilite de systeme des murs de soutenement (Correlations between failure modes in system reliability analysis of retaining walls)", Proceedings, 4th Conference on Materials and Structures Reliability, JNF '05, Clermont-Ferrand, France, Oct. 25-26, 2005, Paper No. 2.6, 8 p. (in French).
  • Bourdeau, P. L. and Amundaray, J. (2005), "Non-parametric Simulation of Geotechnical Uncertainty", Geotechnique, Institution of Civil Engineers, London, Vol. 55, No. 2, pp. 95-108.
  • Bourdeau, P. L. (2004), "Probabilistic Modeling of Landslide Reactivation by Embankment Load", Proceedings, ASCE Specialty Conference on Probabilistic Mechanics, Albuquerque, NM, July. Publication on CD-ROM.
  • Bourdeau, P. L. (2004), "Long-term Deformation of Soft Ground at a Trial Embankment Site and Its Simplified Numerical Modeling", in GSP No. 126, Geotechnical Engineering for Transportation Projects, July, ASCE, Vol. 1, pp. 420-427.
  • P.D. Zavattieri, G. C. Buscaglia and E. A. Dari, "Finite element mesh optimization in three dimensions", Latin American Applied Research, 26 pp. 233-236, 1996.
  • P.D. Zavattieri, E. A. Dari and G. C. Buscaglia, "Optimization strategies in unstructured mesh generation", International Journal for Numerical Methods in Engineering, 39, pp. 2055-2071, 1996.
  • H.D. Espinosa, P. D. Zavattieri, and G. L. Emore, "Computational modeling of geometric and material nonlinearities with application to impact damage in brittle failure", in Advances in Failure Mechanisms in Brittle Materials, edited by R.J. Clifton, and H.D. Espinosa, ASME Winter Annual Meeting, pp. 119-161, Atlanta, GA, Nov. 17-22, 1996.
  • 1996, pp. 1545-1555. Updated for second edition, 2003. Washington, DC, 1995, pp. 60-66. CRC Press, Boca Raton, FL, 1995, pp. 1858-1899.
  • Theresa Foley, Eric A. Betterton, Robert Jacko, John Hillery (2011) "Lake Michigan Air Quality: The 1994--2003 LADCO Aircraft Project (LAP)," submitted to Atmospheric Environment.
  • G.C. Buscaglia, E. A. Dari and P. D. Zavattieri, "Mesh Optimization in three dimensions", IV Congreso de Mecanica Computacional, Vol. 14, 505-511, Mar del Plata, Argentina, Nov. 1994. (Talk given by P.D. Zavattieri).
  • Information Systems
    , Vol. 53, No. 4, ACSM, December 1993, pp. 214-217. 19. Patidar, V., Labi, S., Sinha, K.C., Thompson, P.D., Hyman, W.A., Shirole, A. (2007). Performance Measures for Enhanced Bridge Management, Transportation Research Record 1991, p. 43-53.

  • Huo, H., Bobet, A., Fernandez, G., and Ramirez, J.A., (in press-accepted for publication) "Load Transfer Mechanisms between Underground Structure and Surrounding Ground: Evaluation of the Failure of the Daikai Station," ASCE Journal of Geotechnical Engineering.
  • Bobet, A., Ramirez, J.A., and Parra-Montesinos, G., (2006) "Performance of the Daikai Subway Station during the Great Hanshin Earthquake," ACI Structural Journal, 103(1), 113-122.
  • Parra-Montesinos, G.J., Bobet, A., and Ramirez, J. (2006), "Evaluation of Soil-Structure Interaction And Structural Collapse In Daikai Subway Station During Kobe Earthquake", Structural Journal, American Concrete Institute, Vol. 103, No. 1, pp. 113-122.
  • Nam, S. and Bobet, A. (2006), "Liner Stresses in Deep Tunnels below the Water Table", Tunneling and Underground Space Technology, Vol. 21, No. 6, pp. 626-635.
  • Mutlu, O. and Bobet, A. (2006), "Slip Propagation along Frictional Discontinuities", International Journal of Rock Mechanics and Mining Sciences, Vol. 43, pp. 860-876.
  • Huo, H., Bobet, A., Fernandez, G., and Ramirez, J. (2005), "Load Transfer Mechanisms between Underground Structure and Surrounding Ground: Evaluation of the Failure of the Daikai Station", ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 12, pp. 1522-1533.
  • Huo, H., Bobet, A., Fernandez, G. and Ramirez, J. (2006), "Analytical Solution for Deep Rectangular Structures Subjected to Far-Field Shear Stresses", Tunnelling and Underground Space Technology, Vol. 21, No. 6, pp. 613-625.
  • Bobet, A., Lee, H. S. and Santagata, M. C. (2007), "Pullout capacity of a stiff inclusion in a saturated poroelastic matrix", International Journal for Numerical and Analytical Methods in Geomechanics, in press (available on line).
  • Bobet, A. (2005), "A Simple Method for the Design of Tunnel Support with Anchored Rockbolts", Rock Mechanics and Rock Engineering, Vol. 39, No. 4, pp. 315-338.
  • Weng, S.; Blatchley III, E.R. (2012) "UV-Induced Effects on Chlorination of N-DBP Precursors," Presented at: Drinking Water Disinfection By-Products Gordon Research Conference, Mount Holyoke College, South Hadley, MA, 8 August 2012.
  • Blatchley III, E.R.; Shen, C. (2012) "Biodosimetry, CFD-I, and Lagrangian Actinometry for UV System Validation," Presented at: WEFTEC Pre-Conference Workshop: Computational Fluid Dynamics: Fundamentals and Applications for Wastewater Treatment, Disinfection, and Reuse, New Orleans, LA, 29 September 2012.
  • Blatchley III, E.R. (2012) "UV Technologies for Aquatics Applications: State of the Art, Research Needs, and Translation to Other Settings," Keynote Presentation Given to: Moving Forward: Sustainable UV Solutions to Meet Evolving Regulatory Challenges IUVA Americas Meeting, Washington, DC, 14 August 2012..
  • Blatchley III, E.R. (2012) "Effects of UV-Based Treatment on Water and Air Chemistry in Chlorinated Indoor Pools," Presented at: World Aquatic Health Conference, Norfolk, VA, 12 October 2012.
  • Blatchley III, E.R. (2012) "Effects of UV-Based Treatment on Air and Water Chemistry in Chlorinated, Indoor Swimming Pools," Presented at: Drinking Water Disinfection By-Products Gordon Research Conference, Mount Holyoke College, South Hadley, MA, 8 August 2012.
  • Blatchley III, E.R. (2012) "Effects of Modified Mixing Devices on Effluent Quality in Aerated Lagoons: Wingate, IN," Alliance of Indiana Rural Water, Wingate, IN, September 17, 2012.
  • Nyman, M.C., J. Harden, L. F. Nies, and E.R. Blatchley III. 2004. Biodegradation of 3,3-Dichlorobenzidine in Freshwater Sediments. Journal of Environmental Engineering and Science. 3:89-95.
  • Chiu, K. P., Lyn, D. A., Savoye, P., and Blatchley III, E. R. (1999). "Effect of UV system modifications on disinfection performance", ASCE J. Environmental Engineering, 125, no. 5, pp. 459-469.
  • Lyn, D. A. and E. R. Blatchley III (2005). "CFD-based models of ultraviolet disinfection channels", ASCE J. Environmental Engineering, vol. 131, no. 6, June, 2005, pp. 838-849