Propulsion

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • A Ceramic-Manganese Oxide System for the Decomposition of High Concentration Hydrogen Peroxide – Beutien, Trisha
  • A Computational Tool for Spray Modeling Using Lagrangian Droplet Tracking in a Homogeneous Flow Model – Pham, Tuan
  • A Fully Nonlinear Model for Atomization of High-Speed Jets – Yoon, Suk
  • A Numerical Heat Transfer Model for an Advanced Solar Thermal Propulsion System – Miller, David
  • A Photographic Study of the Effect of Acceleration on Composite Propellant Combustion – Frederick, Jr., Robert
  • A Study of Non-Steady Combustion of Heterogeneous Propellants – Deur, John
  • A Study of Temperature Sensitivity and Variable Pressure Exponents in AP/HTPS Composite Propellants – Gaunce, Michael
  • A Study of the Aerodynamic Breakup of Molten Aluminum Particles in Two-Phase Flow – Nack, Kevin
  • A Theoretical Basis for Electrokinetic Propulsion – Stein, William
  • A Theoretical Study of the Temperature Sensitivity of a Solid Rocket Motor – Hamke, Rolf
  • A Thermostructural Analysis of a Lined Composite Rocket Nozzle – VandenBoom, Michael
  • Acoustic Inertial Confinement Fusion: Potential Applications to Space Power and Propulsion – Butt, Adam
  • Altitude Compensation Using Combustible Nozzle Liners – Tsohas, John
  • An Analysis of the Instantaneous Performance Characteristics of Nozzleless Solid Rocket Motors – Armstrong, Jr., Gerald
  • An Experiment to Study the Effects of Aspect Ratio on Rocket Thrust Chamber Cooling Channel Performance – Wennerberg, Jason
  • Analysis of an Advanced Aero-Engine Bearing Chamber – Bies, Christopher
  • Analysis of an Axisymmetric Rocket Based Combined Cycle Engine – Gujarathi, Amit
  • Anodic Studies of the Aluminum-Hydrogen Peroxide Semi-Fuel Cell – Lim, Kok
  • Application of High-Order Numerical Schemes for the Boltzmann Transport Equations to Non-Equilibrium Gas Flows – Chigullapalli, Sruti
  • Autoignition of Kerosene by Decomposed Hydrogen Peroxide in a Dump Combustor Configuration – Sisco, James
  • Biannular Airbreathing Nozzle Rig Facility Development – Trebs, Adam
  • Boundary Element Modeling of 2-D and 3-D Atomization Processes – Chao, Chien-Chi
  • Characterization of Pintle Engine Performance for Nontoxic Hypergolic Bipropellants – Austin, Jr., Benjamin
  • Characterization of Substrate Geometries for the Catalytic Decomposition of Hydrogen Peroxide – Long, Matthew
  • Characterization of the Turbulent Windage in an Annulus and Its Incorporation into Two Sump Design Codes – Canino, James
  • Combustion Mechanics of Wide Distribution Solid Propellants – Frederick, Jr., Robert
  • Combustion Modeling of Composite Solid Propellants – Renie, John
  • Combustion Response Measurements of Solid Rocket Propellant by a Microwave Technique – Matson, John
  • Comparative Study of Pyrolytic Coking of JP-8 and JP-10 On Inconel and Stainless Steel Surfaces – Briggs, Eric
  • Computational Analysis of a Pulsed Inductive Plasma Accelerator – Corpening, Jeremy
  • Computational Modeling of High Frequency Combustion Instability in a Single-Element Liquid Rocket Engine – Smith, Randolph
  • Conjugate Analysis of Asymmetric Heating of Supercritical Fluids in Rectangular Channels – Jung, Hogirl
  • Control and Data Acquisition System for Rocket Combustor Experimentation – Nugent, Nicholas
  • Design and Validation of a Test Facility for Coaxial Radio Frequency Plasma Thrusters – Delgado, Jorge
  • Design of a High Thrust/Low Thrust Orbital Transfer Vehicle Considering Van Allen Radiation Belts – Mailhe, Laurie
  • Development of Tools for Experimental Analysis of Erosive Burning in/Near Slots in Solid Rocket Motors – Moss, James
  • Direct-Connect Testing of a Rocket Based Combined Cycle Engine – Jos, Cyril
  • Dynamics of Bearing Chamber Air and Oil Flows in Gas Turbine Engines – Rodkey, Samuel
  • Effect of Transverse Acoustic Oscillation on the Behavior of a Liquid Jet – Rutz, Mark
  • Effects of Impingement and Shear Upon the Ignition of Hypergolic Rocket Bipropellants – Funk, John
  • Efficacy of a Nonlinear Acoustic Model for Combustion Stability Prediction – Madhav, Ajay
  • Electrocatalysis in Hydrogen Peroxide Fuel Cells – Miller, Daniel
  • Electromagnetic Confinement of Nuclear Plasma: Propulsion Prospectives – Genov, Dentcho
  • Evaluation of Positive Displacement Pump Types for Small Scale, Scroll driven, Propellant Feed Systems – Niemczura, Jerry
  • Experimental Investigation of Asymmetric Heating in a High Aspect Ratio Cooling Channel – Schuff, Reuben
  • Experimental Investigation of Combustion in a Radial Flow Hybrid Rocket Engine – Caravella, Jr., Joseph
  • Experimental Investigation of Erosive Burning in Solid Propellant Motors – Slaby, Justin
  • Experimental Investigation of Hybrid Rocket Combustion Instabilities – VanMeter, Michael
  • Experimental Study of Combustion in Hydrogen Peroxide Hybrid Rockets – Wernimont, Eric
  • Experimental Study of Longitudinal Instabilities in a Single Element Rocket Combustor – Miller, Kevin
  • Experimental and Analytical Investigations of Longitudinal Combustion Instability in a Continuously Variable Resonance Combustor (CVRC) – Yu, Yen
  • Experimental and Kinetic Modeling Study of the Combustion of Jet-A and S-8 Fuels in Laminar Premixed Flames – Nishiie, Takayuki
  • Experiments on Combustion of Advanced Hybrid Rocket Fuels using Hydrogen Peroxide Oxidizer – Corpening, Jeremy
  • Fatigue Life Prediction of Liquid Rocket Engine Combustor with Subscale Test Verification – Sung, In-Kyung
  • Flame Sensing in Pulse Detonation Combustors using Diodes, Ion Probes, and High Speed Video – Kowalkowski, Michael
  • Flow Characteristics of Viscous High-Speed Jets in Axial/Swirl Injectors – Park, Hongbok
  • Forced Excitation of Swirl Injectors using a Hydro-Mechanical Pulsator – Ahn, Benjamin
  • Fundamentals of the Mass Ejection Propulsion System for Mobile Landmines – Armstrong, Kimberly
  • Heterogeneous Decomposition of Hydrogen Peroxide and Its Stability Margin – Ali, Syed
  • Hydrodynamics of Shear Coaxial Liquid Rocket Injectors – Tsohas, John
  • Hypergolic Ignition of a Catalytically Promoted Fuel with Rocket Grade Hydrogen Peroxide – Pourpoint, Timothée
  • Hypergolic Liquid Fuels for Use with Rocket Grade Hydrogen Peroxide – Frolik, Steven
  • Ignition Delay Analysis of Non-Toxic Hypergolic Miscible Fuels – Funk, John
  • Ignition of Hypergolic Propellants – Dambach, Erik
  • Impinging Jets for Application in High-Mach Aircraft Thermal Management – Kibbey, Timothy
  • Impulse Measurement and Modeling of Cyclic Pulse Detonation Engines – Matsutomi, Yu
  • Impulse Measurements of Momentum Exchange Propulsion for Mobility Applications – Edwards, Jonathan
  • In Situ Burning-Rate Determination Using Flash Radiography – Pressley, Jr., Homer
  • Infrared Spectroscopy for the Measurement of In-Situ Deposition of Thermally Stressed Hydrocarbon Fuels – Martin III, Thomas
  • Investigation into an Unsteady Heat Release Model Applied to an Unstable Model Rocket Combustor – O'Hara, Loral
  • Investigation of Combustible Liners for Altitude Compensation in Liquid Rocket Nozzles – Harmon, Michael
  • Investigation of Oil Drainage from the Bearing Chamber of a Gas Turbine Engine – Hrach, Michael
  • Investigation of Simultaneous Vaporization and Decomposition of Hydrogen Peroxide using Multiple Jets in Crossflow – Mok, Jong
  • Langmuir Probe Diagnostics on the Leap Electrothermal Thruster – Huu, Patrick
  • Linear and Nonlinear Dynamics of Swirl Injectors – Richardson, Renith
  • Liquid Film Cooling in a Model Combustor using Swirl Injection – Yu, Yen
  • Liquid and Gelled Sprays for Mixing Hypergolic Propellants Using an Impinging Jet Injection System – James, Mark
  • Measurement and Analysis in a Subscale Rocket Combustor – Helderman, David
  • Measurement and Analysis of an Unstable Model Rocket Combustor – Sisco, James
  • Measurement of the Arc Chamber Pressure Distribution in a Magnetoplasmadynamic Thruster – Cassady, Robert
  • Modeling Acoustically Induced Oscillations of Droplets – Murray, Ian
  • Modeling Dense Sprays Produced by Pressure-Swirl Atomizer – Park, Ki
  • Modeling of Classical Swirl Injector Dynamics – Ismailov, Maksud
  • Modeling of Drop Trajectories and Drop/Wall Interactions in Gas Turbine Engine Sumps – Weinstock, Vladimir
  • Modeling of Oil Film Behavior on a Seal Runner and a Sump Wall – Shimo, Masayoshi
  • Modeling the Effect of Unsteady Chamber Conditions on Atomization Processes – Rump, Kurt
  • Nitramine Composite Propellant Modeling – Blomshield, Frederick
  • Nonlinear Modeling of Atomization Processes – Hilbing, James
  • Nonlinear Modeling of Jet Atomization in the Wind-Induced Regime – Spangler, Christopher
  • Numerical Analysis of Coaxial Swirl Injectors – Canino, James
  • Numerical Approaches for Hydrodynamic Cavitating Flows – Chen, Yongliang
  • On the Nonlinear Dynamic Response of Plain Orifice Atomizers/Injectors – MacDonald, Megan
  • Parametric Studies of an Aluminum-Hydrogen Peroxide Semi-Fuel Cell – Brodrecht, David
  • Performance Analysis of Coupled and Segregated CFD Methods – Sardeshmukh, Swanand
  • Performance Characterization of a Radio-Frequency Capacitively Coupled Discharge Microthruster – Stein, William
  • Plume and Performance Measurements on a Plug Nozzle for Supersonic Business Jet Applications – Sandroni, Alexander
  • Pressure Oscillation Analysis of a Research Dump Combustor Ramjet Experiencing Combustion Instability – Blomshield, Frederick
  • Propellant Solid Phase Temperature Measurements – McGrath, David
  • Simulating Collisions of Droplets with Walls and Films Using a Level Set Method – Kwon, T.J.
  • Simulation of Orifice Internal Flows Including Cavitation and Turbulence – Xu, Changhai
  • Simulation of the Nonlinear Dynamics of Charged Liquids Using Boundary Element Methods – Yoon, Suk
  • Solid Propellant Flame Temperature Measurements – Geyer, Mark
  • Solid Rocket Motor Grain Burnback Analysis Using Adaptive Grid Techniques – Hejl, Robert
  • Studies on Pressure-Gain Combustion Engines – Matsutomi, Yu
  • Study of Heat Transfer in a Gaseous Hydrogen Liquid Oxygen Multi-Element Combustor – Droppers, Lloyd
  • Study of Hydrodynamic Instability of Shear Coaxial Flow in a Recessed Region – Kim, Byoung-Do
  • Study of Surrogates for Conventional and Synthetic Aviation Jet Fuels – Singh, Deepti
  • Study of an Under-expanded Sonic Impinging Jet Array – Lee, Joon
  • Supercritical Fuel Film Cooling in a RP-1/Gox Staged Combustion Rocket – Haberlen, Philip
  • Supersonic Analysis of Plume Characteristics for Asymmetric Nozzles – Childress, Karla
  • Surface Thermal Loading Imposed By A Sonic Or Supersonic Impinging Jet – Stuerman, Michael
  • Swirl Injectors for Oxidizer-Rich Stages Combustion Cycle Engines and Hypergolic Propellants – Long, Matthew
  • The Design and Operation of a Servo-Controlled Solid Propellant Strand Window Bomb – Lilley, Jay
  • The Effect of Erosive Burning of Temperature Sensitivity in Composite Solid Propellants – Barger, Mary
  • The Non-Catalytic Ignition of High-Performance Monopropellants – Remson, Andrew
  • Thermal Decomposition of an Advanced Monopropellant – Rubel, Ken
  • Trajectory Control Through Thrust Vector Rotation – Bulathsinghala, Ivor
  • Trajectory Control for Agile Landmines – Kowalkowski, Matthew
  • Unsteady, Viscous, Cavitating Simulation of Injector Internal Flows – Bunnell, Robert
  • Validation of Numerical Simulations for Nano-Aluminum Composite Solid Propellants – Yan, Allen
  • Vaporization and Decomposition of Hydrogen Peroxide Droplets – Pearson, Nicholas
  • Visualization of Liquid Jet Breakup and Droplet Formation – Moses, Michael