Title — Alphabetical

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
  • 3-D Large Eddy Simulation for Jet Aeroacoustics – Uzun, Ali
  • A Boundary Element Approach to Thermoelastic Crack Problems – Hucker, Scott
  • A Ceramic-Manganese Oxide System for the Decomposition of High Concentration Hydrogen Peroxide – Beutien, Trisha
  • A Comparison of Fatigue Crack Initiation at Holes in 2024-T3 and 2524-T3 Aluminum Alloys – Golden, Patrick
  • A Comparison of the Fatigue Damage Resistance and Residual Strength of 2024-T3 and 2424-T3 Panels Containing Multiple Site Damage – Sexton, Darren
  • A Complete Nonconforming Convergent Displacement Formulated Singular Finite Element for Linear Elastic Static and Dynamic Loading Crack Problems – Kelley, John
  • A Computational Tool for Spray Modeling Using Lagrangian Droplet Tracking in a Homogeneous Flow Model – Pham, Tuan
  • A Computational Transonic Flutter Boundary Tracking Procedure – Gallman, John
  • A Contribution to the Stability of Electrically Conducting Boussinesq Fluids by the Energy Method – Greenburg, Alan
  • A Crack Gage Approach to Monitoring Flaw Growth Potential in Aircraft – Gates, Matthew
  • A Design Tool for Constructing Multiple Lunar Swingby Trajectories – Wilson, Roby
  • A Fault-Tolerant Controller Design Using Alternating Projection Techniques – Kimura, Tsunekazu
  • A Feasibility Study Regarding the Addition of a Fifth Control to a Rotorcraft In-Flight Simulator – Turner, Simon
  • A Feasibility Study of the Use of Axisymmetric Thrust Vectoring for Enhanced In-Flight Simulation – Jones, Mark
  • A Formulation and Experimental Verification for a Pneumatic Finite Element – Berry, Dale
  • A Fully Nonlinear Model for Atomization of High-Speed Jets – Yoon, Suk
  • A Geometrically Nonlinear Tensorial Formulation of a Skewed Quadrilateral Thin Shell Finite Element – Wu, Yii-Cheng
  • A Global Search Method for Damage Detection in General Structures – Quintana, Juan
  • A Global-Local Structural Analysis Method – Mao, Kunming
  • A Graph Based Algorithm for Adaptable Dynamic Airspace Configuration for Nextgen – Savai, Merhernaz Percy
  • A Hybrid Genetic Algorithm Approach to Global Low-Thrust Trajectory Optimization – Vavrina, Matthew
  • A Low Thrust Transfer Strategy to Earth-Moon Collinear Libration Point Orbits – Ozimek, Martin
  • A Mathematical Theory of Viscous Fluids with Microstructure & Microtemperature – Cook, Richard
  • A Minicomputer Based Interactive Graphics Computer System with Illustrative Application to Structural Data Analysis – Guthrie, Gregory
  • A Mixed Variational Principle for Finite Element Analysis – Day, Michael
  • A Modern Approach to Pilot/Vehicle Analysis and the Neal-Smith Criteria – Bacon, Barton
  • A Nanolaminate Manufacturing Technique for Multifunctional Materials and Devices – Merrill, Marriner
  • A New 48 D.O.F. Quadrilateral Shell Element with Variable-Order Polynomial and Rational B-Spline Geometries with Rigid Body Modes – Moore, Carleton
  • A New End Tab Design for Off-Axis Tension Tests of Composite Materials – Berreth, Steven
  • A New Method For Estimation of Response in Complex Systems – Kayser, Kenneth
  • A New Scheme for the Navier-Stokes Equations Employing Alternating-Direction Operator Splitting and Domain Decomposition – Spyropoulos, John
  • A Non-Linear Vortex-Lattice Model for Leading-Edge Separation on a Prop-Fan Blade – Melville, Reid
  • A Novel Experimental Technique for Dynamic Friction Studies – Patanella, Alejandro
  • A Numerical Heat Transfer Model for an Advanced Solar Thermal Propulsion System – Miller, David
  • A Numerical and Experimental Investigation of the Effects of Notches on Fatigue Behavior – Scheumann, Troy
  • A Parallel Lanczos Algorithm for the Solution of the General Eigenvalue Problem – Danial, Albert
  • A Parametric Pole-Matching Approach to Relative Stability and System Integrity – Le, Dzu
  • A Photographic Study of the Effect of Acceleration on Composite Propellant Combustion – Frederick, Jr., Robert
  • A Proposed Technique for Discretization of Boundary Conditions in Time-Dependent, Viscous, Compressible Flows – Chiu, Bang-Ming
  • A Recursive Solution to the Suboptimal Block Nehari Problem – Augenstein, David
  • A Rule-Based Conflict Resolution Algorithm for the Next Generation Air Transportation System (NextGen) – Hahn, Jeeyeon
  • A Shape-Based Approach to Automated, Low-Thrust, Gravity-Assist Trajectory Design – Petropoulos, Anastassios
  • A Simulink Model for Vehicle Rollover Prediction and Prevention – Chiu, Jimmy
  • A Spectral Analysis Approach to Wave Propagation in Layered Solids – Rizzi, Stephen
  • A Spectral Boundary Element Method for Transient Heat Conduction – Hill, Lisa
  • A Statistical Account of the Effect of Arbitrary Profile Variation on Fretting Fatigue Behavior of the Contact Surface of a Dovetail Joint – Kumari, Shyama
  • A Stochastic Model for Predicting the Subsidence of Granular Media – Sweet, Arnold
  • A Study of Capillary Flow in a Vane-Wall Gap in Zero Gravity – Chen, Yongkang
  • A Study of Failure in 3-D Carbon-Carbons – Pollock, Peter
  • A Study of Fatigue Crack Growth of Panels Containing Multiple Site Damage – Buhler, Kimberley
  • A Study of Frequency Effects and Damage Accumulation During the Fatigue of Graphite/Epoxy and Glass/Epoxy Composite Materials – Tsai, Gwo-Chung
  • A Study of Integrated Structure and Control Design – Sallee, Vernon
  • A Study of Non-Steady Combustion of Heterogeneous Propellants – Deur, John
  • A Study of Probabilistic Durability Analysis – Drury, Steven
  • A Study of Sandwich T-Joints and Composite Lap Joints – Turaga, Umamaheswar
  • A Study of State-Rate Feedback Explicit Model-Following in its Application to V/STOL Aircraft – Buethe, Scott
  • A Study of Temperature Sensitivity and Variable Pressure Exponents in AP/HTPS Composite Propellants – Gaunce, Michael
  • A Study of the Aerodynamic Breakup of Molten Aluminum Particles in Two-Phase Flow – Nack, Kevin
  • A Study on Composite Adhesive Lap Joint – Zeng, Qinggang
  • A Sub-Domain Inverse Method for Dynamic Crack Propagation Problems – Cho, Sung
  • A System-of-Systems Framework for Improved Decision Support in Space Exploration – Sindiy, Oleg
  • A Systematic Method for Gravity-Assist Mission Design – Heaton, Andrew
  • A Theoretical Basis for Electrokinetic Propulsion – Stein, William
  • A Theoretical Study of the Temperature Sensitivity of a Solid Rocket Motor – Hamke, Rolf
  • A Theoretical and Experimental Study of Strength and Its Distribution in Fiber-Reinforced Composites – Yamada, Shoji
  • A Thermostructural Analysis of a Lined Composite Rocket Nozzle – VandenBoom, Michael
  • A Three-Dimensional Investigation of Steady State Fatigue Crack Closure Behavior for Through-Thickness and Part-Through Flaws – Ray, Suvendoo
  • A Three-Dimensional Model of Fatigue Crack Growth Incorporating Crack Closure – Pope, John
  • A Two-Dimensional Unsteady Analysis For Transonic and Supersonic Cascade Flow – Kao, Yung-Fu
  • Acoustic Emission Behavior in 3D Carbon/Carbon Composites – Gates, Thomas
  • Acoustic Emission: An Application to Fracture Mechanics – Miller, Ronnie
  • Acoustic Inertial Confinement Fusion: Potential Applications to Space Power and Propulsion – Butt, Adam
  • Active Aeroelastic Panels with Optimum Self-Straining Actuators – Leeks, Tamara
  • Actuation Constraints in Multivariable Flight Control Systems – Anderson, Mark
  • Adaptive 2D Finite Element Simulation of Metal Forming Processes – Heinstein, Martin
  • Adaptive Sandwich Structures – Zhang, Xiaodong
  • Aerobraking Tethers for the Exploration of the Solar System – Puig-Suari, Jordi
  • Aerodynamic Forces on Oscillating Cones and Ogive Bodies in Supersonic Flow – Glauz, William
  • Aerodynamic Losses and Surface Heat Transfer in a Strut/Endwall Intersection Flow – Campbell, Bryan
  • Aerodynamic Losses in a Strut and Duct Flow with Lift – Lindqvist, Jens
  • Aerodynamic Shape and Structural Topology Design of Helicopter Rotor Cross-Sections Using a Genetic Algorithm – Fanjoy, David
  • Aerodynamic and Aeroacoustic Optimization of Rotor Airfoils via Parallel Genetic Algorithm – Jones, Brian R.
  • Aeroelastic Behavior of an Adaptive Lifting Surface – Ehlers, Steven
  • Aeroelastic Stability and Time Response Analysis of Conventional and Supercritical Airfoils in Transonic Flow by Time Integration Method – Guruswamy, P.
  • Aeroelastic Stability of Aircraft with Advanced Composite Wings – Foist, Brian
  • Aeroelastic Stability of a Forward Swept Wing Aircraft with Wing Tip Stores – Steele, William
  • Aeroelastic Tailoring and Structural Optimization of Joined-Wing Configurations – Lee, Dong-Hwan
  • Aeroelastic Tailoring for Passive Flutter Suppression – Stukel, Stephen
  • Aeroservoelastic Tailoring for Lateral Control Enhancement – Nam, Changho
  • Aerospace Structural Design Process Improvement Using Systematic Evolutionary Structural Modeling – Taylor, Robert
  • Aerospace Vehicle Model Simplification for Feedback Control – Newman, Brett
  • Aerothermodynamics of Axial-Flow-Compressors with Water Ingestion – Tsuchiya, Toshiaki
  • Aft-Fuselage Modification of the Gulfstream IV – Valentini, Luiz
  • Aircraft Sizing with Morphing as an Independent Variable: Motivation, Strategies and Investigations – Roth, Brian
  • Airfoil Wake Models for Unsteady Full Potential Applications – Ayer, Timothy
  • Algorithms for Aircraft Intent Inference and Trajectory Prediction – Lovera Yepes, Javier
  • Algorithms for Identification of the Nonlinear Behavior of Structures – Cho, Sung
  • Algorithms for the Maximization of Linear Fractional Transformations – D'Amato, Fernando
  • Allocation of Variable Resources and Aircraft Design Using Multidisciplinary Optimization for System of Systems – Mane, Muharrem
  • Alternating Projection Techniques for Multiobjective Control – Grigoriadis, Karolos
  • Altitude Compensation Using Combustible Nozzle Liners – Tsohas, John
  • An Agent-Based Modeling Approach to a Study of the Effects of Network Logic and a New Aircraft Design on an Air Force Supply Network Located in the Middle East – Cashbaugh, Jasmine
  • An Allocation Approach to Investigate New Aircraft Concepts and Technologies on Fleet-Level Metrics – Tetzloff, Isaac
  • An Analysis of Pedestrian Flow: A Simulation Model for an Aircraft Pier Arm – Carnahan, James
  • An Analysis of the Instantaneous Performance Characteristics of Nozzleless Solid Rocket Motors – Armstrong, Jr., Gerald
  • An Approach to Integrated Aeroservoelastic Tailoring for Stability – Zeiler, Thomas
  • An Efficient Plate Finite Element Model for Analysis of Cracked Metallic Plates Repaired with Composite Patches – Arendt, Cory
  • An Elastic/Viscoplastic Constitutive Model For Fiber Reinforced Thermoplastic Composites – Gates, Thomas
  • An Evaluation of Aging Aircraft Materials – Scheuring, Jason
  • An Experiment to Study the Effects of Aspect Ratio on Rocket Thrust Chamber Cooling Channel Performance – Wennerberg, Jason
  • An Experimental Inverstigation of Radial Deformation of Soft Materials in Kolsky Bar Experiments – Sanborn, Brett
  • An Experimental Investigation of High Pressure Cavitating Atomizers – Li, Haiyun
  • An Experimental Investigation of Propeller Wakes Using a Laser Doppler Velocimeter – Sundar, R.M.
  • An Experimental Investigation of Wind Tunnel Quality – Behrens, Ricky
  • An Experimental Investigation of a Cavitating Slot Orifice – Henry, Mark
  • An Experimental Investigation of the Development and Growth of Counter Rotating Vortices in a Curved Rectangular Duct – Rashed, Ibrahim
  • An Experimental Investigation of the Flow Field Around A Counter-Rotating Propeller System Using a Laser Doppler Velocimeter – Harrison, Garry
  • An Experimental Study of Pilot/Vehicle Dynamics Using a Tilt Rotor Flying Machine – Doman, David
  • An Experimental Study of Swirling Flows as Applied to Annular Combustors – Seal, II, Michael
  • An Integrated Framework to Study the Interaction Between On-Demand Air Service and Existing Regional Transportation System – Joshi, Aditya
  • An Interactive Synthesis Approach for Robust Active Flutter Suppression Control Law Decision – Chen, Ta
  • An Investigation of Kirchhoff's Methodologies for Computational Aeroacoustics – Koutsavdis, Evangelos
  • An Investigation of Very Large Aircraft Impacts on the Air Transportation System with Motivations for Future Aircraft Design – Noth, Kyle
  • An Investigation of the Control Effectiveness of a Laminated Sweptback Wing – Miller, Theron
  • An Investigation of the Fitting of Mixed Autoregressive-Moving Average Models to Second Order Stationary Time Series Data – Sharpe, David
  • An Investigation of the Technique of Statistical Linearization – Hugus, Jack
  • Analysis and Control of Uncertain/Nonlinear Systems in the Presence of Bounded Disturbance Inputs – Pancake, Trent
  • Analysis and Design of Aeroassisted Interplanetary Missions – Johnson, Wyatt
  • Analysis and Design of Aerobraking Tethers – Tragesser, Steven
  • Analysis of Bimaterial Crack Problems in the Presence of Friction – Kurtz, Russell
  • Analysis of Cracked Plates Subjected to Out-of-Plane Loadings – Young, Min-Jho
  • Analysis of Cracks in Thin Layers – Li, Chunsu
  • Analysis of Delamination in Composite Laminates under Low Velocity Impact – Jih, Chan
  • Analysis of Fatigue Crack Growth from Countersunk Fastener Hole – Suh, Jungjun
  • Analysis of Flexible Aircraft Longitudinal Dynamics and Handling Qualities – Waszak, Martin
  • Analysis of Flowfield and Surface Heat Flux Uncertainties Under Typical Blunt-Body Re-entry Conditions – Weaver, Andrew
  • Analysis of Indentation Cracking in Brittle Solids – Chen, Yun
  • Analysis of Stiffened Panels with Multiple Site Damage – Heinimann, Markus
  • Analysis of Thick Section Composite Laminates – Liao, Wei-Chong
  • Analysis of an Advanced Aero-Engine Bearing Chamber – Bies, Christopher
  • Analysis of an Axisymmetric Rocket Based Combined Cycle Engine – Gujarathi, Amit
  • Analysis of the Carburization and Quenching of Steels – Woodard, Paul
  • Analysis of the Correlation Properties of Digital Satellite Signals and Their Applicability in Bistatic Remote Sensing – Shah, Rashmi
  • Analysis of the Motion of Spinning, Thrusting Spacecraft – Gick, Rebecca
  • Analytic Theory and Control of the Motion of Spinning Rigid Bodies – Tsiotras, Panagiotis
  • Analytical Techniques for Tracking Filter Implementation – Gleason, Daniel
  • Analytical Theory for Orbits of Electrostatically Charged Spacecraft and Direct Calculations of Planet-toPlanet Transfers – Gangestad, Joseph
  • Analytical Theory for the Motion of Spinning Rigid Bodies – Ayoubi, Mohammad
  • Anodic Studies of the Aluminum-Hydrogen Peroxide Semi-Fuel Cell – Lim, Kok
  • Anodized Aluminum Pressure Sensitive Paint for Unsteady Aerodynamic Applications – Sakaue, Hirotaka
  • Application of Dynamical Systems Theory in Mission Design and Conceptual Development for Libration Point Missions – Barden, Brian
  • Application of Harmonic Analysis Method to Aeroelastic Stability Analysis of Conventional and Supercritical Airfoils in Transonic Flow – Striz, Alfred
  • Application of High-Order Numerical Schemes for the Boltzmann Transport Equations to Non-Equilibrium Gas Flows – Chigullapalli, Sruti
  • Application of Parabolized Stability Equations to Jet Instabilities and the Associated Acoustic Radiation – Yen, Chih-Chieh
  • Application of a Solution Adaptive Grid to Flow Over an Embedded Cavity – Thornton, Anthony
  • Application of the Method of Weighted Residuals to the Boundary Layer Momentum & Turbulent Stress Transport Equations – Davis, Donald
  • Application of the Spectral Element Method to Interior Noise Problems – Bilodeau, Brian
  • Applications of Crack Tip Opening Angle for Ductile Fracture Analysis – Tanner, Travis
  • Applications of Temperature-Sensitive Luminescent Paints in Aerodynamics – Liu, Tianshu
  • Applications of Three Dimensional Fracture Mechanics to Micro-Indentation Testing and Scribing – Chen, Shi-Yew
  • Approximate Methods for Dynamic Analysis of Large Structures – Kim, Bong
  • Assissment of Turbulence Models and Corrections with Applications to the Orion Launch Abort System – Gross, Nico
  • Autoignition of Kerosene by Decomposed Hydrogen Peroxide in a Dump Combustor Configuration – Sisco, James
  • Automated Design of Delta-V Gravity-Assist Trajectories For Solar System Exploration – Patel, Moonish
  • Automated Design of Gravity-Assist and Aerogravity-Assist Trajectories – Bonfiglio, Eugene
  • Automated Design of Multiple Encounter Gravity-Assist Trajectories – Williams, Steven
  • Ballistic Penetration of GRP Composites: Identification of Failure Mechanisms and Modeling – Lu, Hung-Cheng
  • Basic Study of Superfinishing of Hardened Steels – Chang, Shih-Hsiang
  • Biannular Airbreathing Nozzle Rig Facility Development – Trebs, Adam
  • Bifurcations from Families of Periodic Solutions in the Circular Restricted Problem with Application to Trajectory Design – Campbell, Eric
  • Body-Conforming Grids for General Unsteady Airfoil Motion – Levine, Mark
  • Boundary Element Modeling of 2-D and 3-D Atomization Processes – Chao, Chien-Chi
  • Boundary-Layer Transition on Cones at Angle of Attack in a Mach-6 Quiet Tunnel – Swanson, Erick
  • Buckled Plate Vibrations, Large Amplitude Vibrations, and Nonlinear Flutter of Elastic Plates Using High-Order Triangular Finite Elements – Han, An-Dong
  • Buckling and Debond Growth of Partial Debonds in Adhesively Bonded Composite Flanges – Kwon, Hyukbong
  • Buckling of a Column with Random Displacements – Bernard, Michael
  • CBN Grinding of M2 Tool Steel and the Strength of Ground Surfaces – Mann, James
  • Characteristics of Three-Dimensional Stress Fields in Cracked Plates Under General Loadings – Kwon, Soonwook
  • Characteristics of the Contraction of the Boeing/AFOSR Mach-6 Quiet Tunnel – Borg, Matthew
  • Characterization and Development of Nozzles for a Hypersonic Quiet Wind Tunnel – Steen, Laura-cheri
  • Characterization of Color Printers Using Robust Parameter Estimation – Lana, Carlos
  • Characterization of Crack Growth in Elastic-Plastic Materials – Rangarajan, Balaji
  • Characterization of Elastic-Plastic and Viscoplastic Behavior of AS4/PEEK Thermoplastic Composite – Yoon, Kwang-Joon
  • Characterization of Indalloy 227 Non Lead Solder – Beaumont, Matthew
  • Characterization of Laser-Generated Perturbations and Instability Measurements on a Flared Cone – Chou, Amanda
  • Characterization of Matrix Cracking and Delamination in Laminated Composites – Tao, Jianxin
  • Characterization of Mechanical Properties of a Fiberglass Composite – Kelly, Scott
  • Characterization of Pintle Engine Performance for Nontoxic Hypergolic Bipropellants – Austin, Jr., Benjamin
  • Characterization of Substrate Geometries for the Catalytic Decomposition of Hydrogen Peroxide – Long, Matthew
  • Characterization of the Turbulent Windage in an Annulus and Its Incorporation into Two Sump Design Codes – Canino, James
  • Characterizing Compressive and Fracture Strengths of Fiber Reinforced Composites using Off-Axis Specimens – Bing, Qida
  • Closed Loop, Pilot/Vehicle Analysis of Approach and Landing – Anderson, Mark
  • Cojugate Analysis of Asymmetric Heating of Supercritical Fluids in Rectangular Channels – Jung, Hogirl
  • Combustion Mechanics of Wide Distribution Solid Propellants – Frederick, Jr., Robert
  • Combustion Modeling of Composite Solid Propellants – Renie, John
  • Combustion Response Measurements of Solid Rocket Propellant by a Microwave Technique – Matson, John
  • Comparative Evaluation of Failure Analysis Methods for Composite Laminates – Quinn, Brian
  • Comparative Study of Pyrolytic Coking of JP-8 and JP-10 On Inconel and Stainless Steel Surfaces – Briggs, Eric
  • Composite Laminate Optimization Techniques Applied to Load-Bearing Circuit Board Design – Lamberson, Jr., Steven
  • Composite Panel Flutter Suppression Using Piezoelectric Materials – Paige, Derek
  • Compressive Strength of Unidirectional Fiber Composites With Matrix Nonlinearity – Jun, Alexander
  • Computational Analysis of a Pulsed Inductive Plasma Accelerator – Corpening, Jeremy
  • Computational Fluid Dynamics Analysis and Noise Modeling of Jets with Internal Forced Mixers – Garrison, Loren
  • Computational Modeling for Bridging Size Scales in the Failure of Solids – Zavattieri, Pablo
  • Computational Modeling of Geometric and Material Nonlinearities with Applications to Impact Dynamics – Emore, Gordon
  • Computational Modeling of High Frequency Combustion Instability in a Single-Element Liquid Rocket Engine – Smith, Randolph
  • Computational Techniques for Blade-Vortex Interaction Prediction – Kim, Haedong
  • Computations of an Axial Vortex using Turbulence Models and Investigation of Rotation Corrections – Ananthula, Vikram
  • Computer Simulation of a Multiaxis Air-to-Air Tracking Task Using the Optimal Pilot Control Model – Yucuis, William
  • Concurrent Aircraft Design and Trip Assignment Under Uncertainty as a System of Systems Problem – Mane, Muharrem
  • Constitutive Modeling of Polymeric Composites Under Various Loading Conditions – Zhu, Changming
  • Constrained State Estimation and Control – Lana, Carlos
  • Contact Behavior, Impact Response and Damage in Graphite-Epoxy Laminates Subjected to Initial Stresses – Sankar, Bhavani
  • Contact Geometry, Friction, and Load Variations in Fretting Fatigue of Ti-6Al-4V – Kumari, Shyama
  • Continuum Modeling and Dynamic Analysis of Large Truss Structures – Necib, Brahim
  • Control Design for Parameter Sensitivity Reduction in Linear Regulators: Application to Large Flexible Space Structures – Yedavalli, RamaKrishna
  • Control and Data Acquisition System for Rocket Combustor Experimentation – Nugent, Nicholas
  • Control of Flutter Using Adaptive Materials – Scott, Robert
  • Control of Satellite Imaging Arrays in Multi-Body Regimes – Millard, Lindsay
  • Control of Second Order Information for Linear Systems – Hsieh, Chen
  • Cooling Effects on Photo-Stimulated Luminescence Spectroscopy of Ruby for 3-D Stress Characterization in Thermal Barrier Coatings – Cunzeman, Kara
  • Cooperative Pilot-Optimal Augmentation System Synthesis For Complex Flight Vehicles – Innocenti, Mario
  • Coupled Thermoelastic Analysis of Fretting Contacts – Ganapathy, Harish
  • Covariance Equivalent Realizations: Development and Applications to Model and Controller Reduction – Yousuff, Ajmal
  • Crack Propagation Analysis of Surface Enhanced Titanium Alloys with Fretting Induced Damage – Garcia, Daniel
  • Cryogenic Temperature- and Pressure-Sensitive Fluorescent Paints – Erausquin, Jr., Richard
  • Damage Detection of Sandwich Structure using Time Domain Reflectometry – Kim, Seung-il
  • Delta-V Gravity-Assist Trajectory Design: Theory and Practice – Sims, Jon
  • Design Methodology for Airships of Non-Axisymmetric Cross-Section Geometry – McDonald, Seth
  • Design and Analysis of Multifunctional Structures for Embedded Electronics in Unmanned Aerial Vehicles – Kothari, Rushabh
  • Design and Analysis of Noise Suppression Exhaust Nozzle Systems – Thirumurthy, Deepak
  • Design and Characterization of Fiber/Metal Laminate Composite Materials – Stokman, William
  • Design and Characterization of Multi-Core Composite Laminates – Weeks, Craig
  • Design and Implementation of a Digital Controller for a Laboratory Helicopter Model – Bosler, Patrick
  • Design and Implementation of a Purely Electromagnetic Attitude Control System for a Nano-Satellite – Moonjelly, Paul
  • Design and Optimization of Interplanetary Spacecraft Trajectories – McConaghy, Thomas
  • Design and Testing of a Portable Flight Test Instrumentation and Data Acquisition System for Aircraft – Garman, Karl
  • Design and Validation of a Test Facility for Coaxial Radio Frequency Plasma Thrusters – Delgado, Jorge
  • Design of Human Missions to Mars and Robotic Missions to Jupiter – Okutsu, Masataka
  • Design of Missions to the Outer Planets and Optimization of Low-Thrust, Gravity-Assist Trajectories via Reduced Parameterization – Yam, Chit-Hong
  • Design of Pilot Optimal Control Systems for Air to Air Tracking – Prasad, Shivshankar
  • Design of a High Thrust/Low Thrust Orbital Transfer Vehicle Considering Van Allen Radiation Belts – Mailhe, Laurie
  • Design of a Roll Control System for a Smart Projectile Using Loop Transfer Recovery – O'Neal, Patrick
  • Design, Analysis, and Flight Test of Pilot Displays for Hovering Aircraft – Schroeder, Jeffery
  • Design, Manufacture, and Testing of the Armstrong Hall Microgravity Tower – Ocampo, Jaime
  • Design, Testing and Analysis of a High-Speed, Time-Resolved Non-Intrusive Skin Friction Sensor System – Moen, Jon
  • Designing for Minimum Cost: A Method to Assess Commercial Aircraft Technologies – Ross, Tamaira
  • Determination of Mechanical Properties Using Micro- and Nano-Indentation – Li, Zhiyong
  • Determination of Stress Intensity Factors for Cracks at Deep Notches – Doerfler, Mark
  • Deterministic and Non-deterministic Response Analysis of Complex Shells – Kapania, Rakesh
  • Developing Response Surface Based Wing Weight Equations for Conceptual Morphing Aircraft Sizing – Skillen, Michael
  • Development and Application of the Time Domain Panel Method – Blair, Max
  • Development of Burst-Diaphragm and Hot-Wire Apparatus for Use in the Mach-6 Purdue Quiet-Flow Ludwieg Tube – Rufer, Shann
  • Development of Efficient Molecular Simulation Techniques for Engineering Applications – Subramaniyan, Arun
  • Development of Fluidic Oscillators as Flow Control Actuators – Gregory, James
  • Development of Mechanically Fastened Joint Specimens to Rank Aluminum Alloy Fatigue Performance – Hahn, Darren
  • Development of Square Nozzles for High-Speed, Low-Disturbance Wind Tunnels – Alcenius, Timothy
  • Development of Tools for Experimental Analysis of Erosive Burning in/Near Slots in Solid Rocket Motors – Moss, James
  • Development of a Hail Ice Impact Model and the Dynamic Compressive Strength Properties of Ice – Keune, John
  • Development of a Light Unmanned Aircraft for the Determination of Flying Qualities Requirements – Peters, Mark
  • Development of a Simple and Inexpensive Method for Manufacturing High Quality Nanoparticle/Polymer Nanocomposites – Merrill, Marriner
  • Development of a Split Hopkinson Pressure Bar Method for Intermediate Strain Rate Experimental Testing – Grupido, Christopher
  • Development of an Airport Noise Model Suitable for Fleet-level Studies – Dikshit, Prakash
  • Development of an Unstructured Solution Adaptive Method for the Quasi-Three-Dimensional Euler and Navier-Stoke Equations – Jiang, Yi-Tsann
  • Direct-Connect Testing of a Rocket Based Combined Cycle Engine – Jos, Cyril
  • Discrete Series Synthesis of Randomly Excited Structural System Response – Luo, Siong Siu
  • Discretization and Model Reduction for a Class of Nonlinear Systems – King, Andrew
  • Distinguishing Inertia Effects from the Intrinsic Mechanical Behavior of Soft Materials at High Strain Rates by Kolsky Bar Experiments – Nishida, Erik
  • Disturbances from Shock/Boundary-Layer Interactions Affecting Upstream Hypersonic Flow – Skoch, Craig
  • Domain Switching Effect on Fracture and Fatigue Behavior of Piezoelectric Materials – Chang, I-Ling
  • Double and Multiple Contacts of Similar Elastic Materials – Sundaram, Narayan
  • Downstream Measurements of a High Reynolds Number Horseshoe Vortex – Krautheim, Michael
  • Drag Benefits of Formation Flight and Morphing on Transatlantic Point-to-Point Commercial Air Service – Nehrbass, Johnathan
  • Ductile Fracture of Polycarbonate – Nakaima, Daniel
  • Durability of Countersunk Fastener Holes – Park, Chul
  • Dynamic Aeroelastic Stability of a Generic X-Wing Aircraft Configuration with Design Parameter Variations – Woods, Jessica
  • Dynamic Analysis of a Thick-Section Composite Cylinder Subjected to Underwater Blast Loading – McCoy, Robert
  • Dynamic Behavior of Granular Materials – Kabir, Md Enamul
  • Dynamic Compressive Response of Soft Biological Tissues – Pervin, Farhana
  • Dynamic Delamination Crack Propagation in Polymeric Composites – Tsai, Jia-Lin
  • Dynamic Delamination Crack Propagation in a Graphite/Epoxy Laminate – Grady, Joseph
  • Dynamic Delamination in a Glass Fiber Composite and Interfacial Fracture in a Bi-Material – Syn, Chul
  • Dynamic Delamination of Composites – Guo, Cheng
  • Dynamic Microbuckling Model for Compressive Strength of Polymeric Composites – Tsai, Jia-Lin
  • Dynamic Modeling and Active Control of Aeroelastic Aircraft – Gilbert, Michael
  • Dynamic Programming Methods for Concurrent Design and Dynamic Allocation of Vehicles Embedded in a System-of-Systems – Nusawardhana, A.
  • Dynamic Response and Failure in Layered Structures and Composites – Han, Chenghua
  • Dynamic Safety Analysis – Norville, H. Scott
  • Dynamic Testing of Advanced Materials at High and Low Temperatures – Arrieta, Hernan
  • Dynamics and Control of Artificial Satellite Orbits with Multiple Tesseral Resonances – Ely, Todd
  • Dynamics and Control of Truss Structures with Extendable Members – Wang, Rong
  • Dynamics of Bearing Chamber Air and Oil Flows in Gas Turbine Engines – Rodkey, Samuel
  • Earth to Halo Orbit Transfer Trajectories – Rausch, Raoul
  • Earth-Mars Trajectories Using a Lunar Flyby – Schlossberg, Valerie
  • Earth-to-Lissajous Transfers and Recovery Trajectories Using an Ephemeris Model – Anderson, Jason
  • Effect of Adhesive Layers on Impact Damage Using a Rubber Capped Impactor – Cox, Dennis
  • Effect of Bending-Extension Coupling on the Deformation of Asymmetric Laminates – Chin, Hsiang
  • Effect of Bondline Thickness on Mixed Mode Fracture of Adhesive Joints – Khoo, Teng
  • Effect of Inclusion Size on Failure Mechanism and Mechanical Properties of Polymeric Composites Containing Micro and Nano Particles – Cho, Jeong-Min
  • Effect of Nanoclay on Compressive Behavior of Polymeric Composites – Subramaniyan, Arun
  • Effect of Nanoparticle Dispersion on Mechanical Behavior of Polymer Matrix and Their Fiber Reinforced Composites – Uddin, Mohammed
  • Effect of Shape and Thickness on Properties of Short Fiber Composites – Deo, Amitabh
  • Effect of Temperature on Mode I Fracture Toughness of Certain Polymeric Foams – Joshi, Manasi
  • Effect of Transverse Acoustic Oscillation on the Behavior of a Liquid Jet – Rutz, Mark
  • Effect of Tunnel Noise on Laminar Stagnation-Point Heating at Mach 6 – Gilbert, Peter
  • Effective Crack Growth Model and Pseudo Three Dimensional Analysis of Composite Laminates – Hua, Yuan
  • Effects of Elevated Driver-Tube Temperature on the Extent of Quiet Flow in the Purdue Ludwieg Tube – Munro, Scott
  • Effects of Impingement and Shear Upon the Ignition of Hypergolic Rocket Bipropellants – Funk, John
  • Effects of Lateral Confinement on the Static and Dynamic Strength of Brittle Materials – Adams, Douglas
  • Effects of Mach Number and Wing Sweep on Transonic Aeroelastic Forces and Flutter Characteristics – Mohr, Ross
  • Effects of Z-pinning on Mode I Dynamic Delamination of Woven Composite Laminate – Schlueter, Andrew
  • Efficacy of a Nonlinear Acoustic Model for Combustion Stability Prediction – Madhav, Ajay
  • Efficient Finite Element Modeling of Thin-Walled Structures with Constrained Viscoelastic Layer Damping – Adams, Douglas
  • Efficient Modeling of Postbuckling Delamination Growth in Composite Laminates Using Plate Elements – Klug, John
  • Elastic-Plastic Behavior of Thermoplastic Composites Under Cyclic Loadings – Rui, Yuting
  • Elastic-Plastic Fracture Analysis for Small Scale Yielding – Kim, Hong-On
  • Elastic-Plastic Material Characterization and Fatigue Crack Growth in Unidirectional Metal-Matrix Composites – Kenaga, Donald
  • Elasto-Plastic Finite Element Analysis of Contacts with Applications to Fretting Fatigue – Pérez-Ruberté, Eddie
  • Electrocatalysis in Hydrogen Peroxide Fuel Cells – Miller, Daniel
  • Electromagnetic Confinement of Nuclear Plasma: Propulsion Prospectives – Genov, Dentcho
  • Elevated Temperature Fretting Fatigue of Nickel Based Alloys – Gean, Matthew
  • Ellipsoid Methods for Multiobjective Control with Quadratic Performance Measures – Eudaric, Alain
  • Energy Based Design for Morphing Aircraft Wings – Prock, Brian
  • Equivalent Continuum Finite Element Modelling of Plate-Like Space Lattice Structures – Lamberson, Steven
  • Euler Flutter Analysis of Airfoils Using Unstructured Dynamic Meshes – Rausch, Russ
  • Evaluation of Continuing Damage From a Cracked Hole with a Failed Ligament – Main, Benjamin
  • Evaluation of Diffuser Modifications for the Boeing/AFOSR Mach-6 Quiet Tunnel – Hannon, Michael
  • Evaluation of Fatigue Crack Initiation Behavior of an Experimental Ternary Aluminum-Lithium Alloy – Blatt, Paul
  • Evaluation of Finite Element Analysis of Piezoelectric Materials with Holes and Cracks – Sack, Elizabeth
  • Evaluation of Multiple Site Damage in Lap Joint Specimens – Wang, Hsing-Ling
  • Evaluation of Positive Displacement Pump Types for Small Scale, Scroll driven, Propellant Feed Systems – Niemczura, Jerry
  • Evaluation of Two-Dimensional High-Speed Turbulent Boundary Layer and Shock-Boundary Layer Interaction Computations with the Overflow Code – Oliver, Anthony
  • Evaluation of the Crack Gage as an Advanced Individual Aircraft Tracking Concept – Dumanis-Modan, Alon
  • Experimantal and Kinetic Modeling Study of the Combustion of Jet-A adn S-8 Fuels in Laminar Premixed Flames – Nishiie, Takayuki
  • Experimental Aerodynamic Analysis of a Plug Nozzle for Supersonic Business Jet Application – Tapee, John
  • Experimental Characterization of Opposed Oscillating Wings for a Hovering MAV – Karni, Etan
  • Experimental Characterization of a Simple Gas Turbine Engine Sump Geometry – Radocaj, Daniel
  • Experimental Correlation between Intrinsic Material Properties and the Failure of Composite Laminates under Ice Impact – Nightingale, Jay
  • Experimental Determination of Mode I Stress Intensity Factors for Elevated Temperature Fretting Fatigue of a Nickel-Based Superalloy – Tate, Nathan
  • Experimental Determination of the Mode I Stress Intensity Factor for a Corner Cracked Lug using a Marker Banding Technique – Moyle, Nicholas
  • Experimental Investigation of Asymmetric Heating in a High Aspect Ratio Cooling Channel – Schuff, Reuben
  • Experimental Investigation of Combustion in a Radial Flow Hybrid Rocket Engine – Caravella, Jr., Joseph
  • Experimental Investigation of Erosive Burning in Solid Propellant Motors – Slaby, Justin
  • Experimental Investigation of Hybrid Rocket Combustion Instabilities – VanMeter, Michael
  • Experimental Investigation of Propeller - Wing Interaction – Witkowski, David
  • Experimental Investigations of the Unsteadiness in a Cavitating Slot Orifice – Chandra, Budi
  • Experimental Study of Combustion in Hydrogen Peroxide Hybrid Rockets – Wernimont, Eric
  • Experimental Study of Diffusing S-Ducts – Walters, Leon
  • Experimental Study of Longitudinal Instabilities in a Single Element Rocket Combustor – Miller, Kevin
  • Experimental Validation of Mode I Stress Intensity Factors for the Single-Cracked Pin-Loaded Lug – Child, David
  • Experimental and Analytical Investigations of Longitudinal Combustion Instability in a Continuously Variable Resonance Combustor (CVRC) – Yu, Yen
  • Experimental and Boundary Element Analysis of Hertzian Cone Cracking – Chen, Shi-Yew
  • Experimental and Finite Element Simulation Methods for Metal Forming and Cutting Processes – Shih, Albert
  • Experiments on Combustion of Advanced Hybrid Rocket Fuels using Hydrogen Peroxide Oxidizer – Corpening, Jeremy
  • Extended Proagation GNSS Ephemerides Employing Measurements Fusion – Walker, Michael
  • FLTSIM Flight Simulator A&AE Microcomputer System – Jones, Brian W.
  • Failure Analysis of Laminated Composite Angles – Kelly, Scott
  • Failure Analysis of Quasi-Isotropic Composite Laminates With Free Edges Under Off-Axis Loading – Zhou, Shu-Gong
  • Failure Criterion for Notched Fiber Dominated Composite Laminates – Vaidya, Rajesh
  • Failure Initiation and Ultimate Strength of Composite Laminates Containing a Center Elliptical Hole – Harrington, Brian
  • Failure Mechanisms in Glasses and Glass Ceramics – Xu, Yueping
  • Failure of Qusai-Isotropic Composite Materials Under Off-Axis Loading – Zhou, Shu-Gong
  • Fatigue Crack Growth Behavior of a Titanium Matrix Composite Under Thermomechanical Loading – Blatt, Paul
  • Fatigue Crack Growth From Coldworked Eccentrically Located Holes In 7075-T651 Aluminum – Saunder, Terrence
  • Fatigue Crack Growth in Boron-Aluminum Metal Matrix Composites – Rizzi, Stephen
  • Fatigue Crack Growth of Embedded Flaws in Plate and Lug Type Fastener Holes – Harter, James
  • Fatigue Crack Initiation, Growth and Coalescence at Notches in High Strength Steel – Green, Stephen
  • Fatigue Life Prediction of Liquid Rocket Engine Combustor with Subscale Test Verification – Sung, In-Kyung
  • Fatigue Life and Residual Strength of Panels with Multiple Site Damage – Moukawsher, Elias
  • Fatigue Performance of an Advanced Fastener Hole Cold Working Method – Lamb, Gregory
  • Feedback Control, Large Amplitude Vibration, and Postbuckling of Space Lattice Beams using Simplified Finite Element Models – Berry, Dale
  • Filtered Particle Scattering: Laser Velocimetry Using An Iodine Filter – Hoffenberg, Robert
  • Filtering Strategies for Non-Gravitational Accelerations With Application to the Global Positioning System – Shoultz, Gregg
  • Final Assembly and Initial Testing of the Purdue Mach-6 Quiet-Flow Ludwieg Tube – Skoch, Craig
  • Finite Element Analysis Cracks in Orthotropic Elastic-Plastic Materials – Pinella, David
  • Finite Element Analysis of Fretting Fatigue Stresses – McVeigh, Pamela
  • Finite Element Analysis of the Mechanics of Blade Disk Contacts – Gean, Matthew
  • Finite Element Flutter Analysis of Flat Panels in Three-Dimensional Supersonic Unsteady Potential Flow – Sung, Shung-Hsing
  • Flame Sensing in Pulse Detonation Combustors using Diodes, Ion Probes, and High Speed Video – Kowalkowski, Michael
  • Flight Control Synthesis for Flexible Aircraft Using Eigenspace Assignment – Davidson, Jr., John
  • Flight Testing of Pressure Sensitive Paint Using a Phase Based Laser Scanning System – Lachendro, Nathan
  • Flight Testing of Small Remotely Piloted Aircraft for System Identification – Wypyszynski, Aaron
  • Flow Characteristics of Viscous High-Speed Jets in Axial/Swirl Injectors – Park, Hongbok
  • Flow Physics of Strained Turbulent Axial Vortices – Eshpuniyani, Brijesh
  • Fluid Dyamics Perturbations Using Laser Induced Breakdown – McGuire, Joseph
  • Fluid Dynamics of Meteor Explosions in a Heterogeneous Atmosphere – Novick, Allan
  • Fluidic Spray Control – Tseng, Kuo-Tung
  • Fluorescent Pressure Sensitive Paints for Aerodynamic Rotating Machinery – Burns, Steven
  • Flutter Control of Wing Boxes Using Piezoelectric Actuators – Forster, Edwin
  • Force Identification on General Structures – Adams, Jr., Robert
  • Forced Convection Condensation of Vapor Flowing Around A Circular Cylinder in Presence of Inert Gas, Gravitational Field and Superheating – Ferreira, Sérgio
  • Forced Excitation of Swirl Injectors using a Hydro-Mechanical Pulsator – Ahn, Benjamin
  • Formal Design Space Evaluation and Optimization for Innovative Aeroelastic Concepts – Henderson, Joseph
  • Formulation for Symmetrically Laminated Beam and Plate Finite Elements with Shear Deformation – Chen, Alexander
  • Formulation of Boundary Conditions for the Multigrid Acceleration of the Euler and Navier Skokes Equations – Jentink, Thomas
  • Formulation of Three Simple Triangular Plane Stress Anisotropic Finite Elements for a Microcomputer – Wanthal, Steven
  • Fractographic Analysis of Fatigue Failures with Fretting Induced Damage – Garcia, Daniel
  • Fracture Behavior of Piezoelectric Materials – Park, Seungbae
  • Fracture and Fatigue Behavior of Piezoelectric Materials – Jiang, Longzhi
  • Fracture and Fatigue of Bonded Composite Repairs – Klug, John
  • Free Edge and Size Effects on Failure Initiation and Ultimate Strength of Laminates Containing a Center Hole – Chu, Gou-Don
  • Frequency Domain Aerodynamic Analysis of Interacting Rotating Systems – Cho, Jinsoo
  • Fretting Fatigue of AISI 9310 Case-hardened Steel – Robinson, Lucas
  • Fretting Fatigue of Anisotropic Materials at Elevated Temperatures – Haradanahalli, Murthy
  • Fretting Induced Plasticity in Blade/Disk Contacts – Gao, Guofeng
  • Fuel-Optimal Low-Thrust Transfers Between Libration Point Orbits – Stuart, Jeffrey
  • Fundamentals of the Mass Ejection Propulsion System for Mobile Landmines – Armstrong, Kimberly
  • Gas Turbine Combustor Operation With Different Phases of Water in Air Supply – Shastri, Ramachandra
  • Gas Turbine Prediffuser-Combustor Performance During Operation With Air- Water Mixture – Laing, Peter
  • Generating Orbits in the Circular Restricted Three-Body Problem with Application to Lunar South Pole Coverage – Grebow, Daniel
  • Genetic Algorithm Approaches for Conceptual Design of Spacecraft Systems Including Multi-Objective Optimization and Design Under Uncertainty – Hassan, Rania
  • Genetic Algorithm Approaches to Optimizing the Location and Number of Smart Actuators on an Aircraft Wing – Cook, Andrea
  • Geometric Approach to Prediction and Periodic Systems – Bhosri, Wisuwat
  • Geometric and Material Nonlinear Dynamic Analysis of Complex Shells – Saigal, Sunil
  • Geometrically Nonlinear Random Vibrations of Structures – Chen, Chih-Tsai
  • Grid Quality Assessment for Unstructured Triangular and Tetrahedral Meshes and Validation of an Upwind Implicit Euler Solution Algorithm – Woodard, Paul
  • Heterogeneous Decomposition of Hydrogen Peroxide and Its Stability Margin – Ali, Syed
  • High Altitude Airship Simulation and Control – Miller, Christopher
  • High Altitude Airship Station Keeping and Launch Model Development Using Output from Numerical Weather Prediction Models – Selby, Christopher
  • High Cycle Fatigue of Fretting Induced Cracks – Golden, Patrick
  • High Strain Rate Characterization and Modeling of Polymer Composites – Thiruppukuzhi, Srikanth
  • High Strain Rate Characterization of Off-Axis Composites Using Split Hopkinson Pressure Bar – Ninan, Lal
  • High Velocity Impact and Penetration of Thick Composite Laminates – Potti, Shyam
  • High-Temperature, High-Frequency Fretting Fatigue of a Single Crystal Nickel Alloy – Matlik, John
  • Hydrodynamics of Shear Coaxial Liquid Rocket Injectors – Tsohas, John
  • Hypergolic Ignition of a Catalytically Promoted Fuel with Rocket Grade Hydrogen Peroxide – Pourpoint, Timothée
  • Hypergolic Liquid Fuels for Use with Rocket Grade Hydrogen Peroxide – Frolik, Steven
  • Hypersonic Crossflow Instability and Transition on a Circular Cone at Angle of Attack – Ward, Christopher
  • Hypersonic Wind-Tunnel Measurements of Boundary-Layer Pressure Fluctuations – Casper, Katya
  • Identification of Equivalent Short Period Dynamics of the X-29A – Bauer, Jeffrey
  • Identification of Pilot Dynamics and Task Objectives from Man-in-the-Loop Simulation – Yuan, Pin-Jar
  • Ignition Delay Analysis of Non-Toxic Hypergolic Miscible Fuels – Funk, John
  • Ignition of Hypergolic Propellants – Dambach, Erik
  • Impact Damage Characterization in Laminated Composites – Joshi, Shiv
  • Impact Failure Mechanisms of Layered Structures – Choi, Seung-Woo
  • Impact of Thermally Confined Alumina/Aluminum Laminates: Experiments and Modeling – Roeder, Blayne
  • Impinging Jets for Application in High-Mach Aircraft Thermal Management – Kibbey, Timothy
  • Implementation and Testing of an Unaided Method for the Acquisition of Weak GPS C/A Code Signals – Heckler, Gregory
  • Implementation of Digital Controllers – Viassolo, Daniel
  • Implicit Multigrid Acceleration of the Euler and Navier Stokes Equation – Harrison, Jr., James
  • Improving Fatigue Crack Growth Performance of Structural – Wilson, Gregory
  • Improving Strength in Composite Laminates Through Use of Hybrid Composites – Voit, Peter
  • Impulse Measurement and Modeling of Cyclic Pulse Detonation Engines – Matsutomi, Yu
  • Impulse Measurements of Momentum Exchange Propulsion for Mobility Applications – Edwards, Jonathan
  • In Situ Burning-Rate Determination Using Flash Radiography – Pressley, Jr., Homer
  • Incorporating Real World Engineering Experiences into Aeronautical and Astronautical Engineering Education – Rodrian, Jeffrey
  • Incremental Quadratic Stability – D'Alto, Luis
  • Induced Drag Reduction Using Aeroelastic Tailoring and Adaptive Control Surfaces – Duke, David
  • Inelastic Behavior of Thermoplastic Composites – Chung, Ilsup
  • Influence of Fatigue Crack Closure on the Growth Rate of Surface Flaws – Troha, William
  • Infrared Spectroscopy for the Measurement of In-Situ Deposition of Thermally Stressed Hydrocarbon Fuels – Martin III, Thomas
  • Initiation, Growth and Coalescence of Fatigue Cracks – Perez, Rigoberto
  • Initiation, Growth, and Coalescence of Small Fatigue Cracks at Notches – Forsyth, Eric
  • Integrated Identification, Modeling and Control with Applications – Shi, Guojun
  • Intelligent Path Prediction for Vehicular Travel – Krozel, James
  • Interaction and Coalescence of Fatigue Cracks at a Hole in a Plate – McComb, Thomas
  • Interfacial Cracks in Isotropic and Anisotropic Media with Friction – Qian, Wenqi
  • Interplanetary Mission Design Techniques for Flagship-Class Missions – Kloster, Kevin
  • Invariant Boundary Conditions for Cascade Flows – Caipen, Terry
  • Inverse Method for Static Problems using Optical Data – Kang, Un-Taik
  • Inverse Problems in Structural Dynamics – Martin, Michael
  • Inverse Solutions on Folded Plate Structures – Danial, Albert
  • Investigating Long-Range Aircraft Staging for Environmental, Economic, and Travel Time Impacts – Tyagi, Ankit
  • Investigation and Modeling of Penetration Process for Composite Laminates Impacted by a Blunt-Ended Projectile – Lee, Shi-Wei
  • Investigation into an Unsteady Heat Release Model Applied to an Unstable Model Rocket Combustor – O'Hara, Loral
  • Investigation of 3-D Fatigue Crack Growth Behavior in a Double-T Cross Section – Rifani, Andreas
  • Investigation of Combustible Liners for Altitude Compensation in Liquid Rocket Nozzles – Harmon, Michael
  • Investigation of Oil Drainage from the Bearing Chamber of a Gas Turbine Engine – Hrach, Michael
  • Investigation of Simultaneous Vaporization and Decomposition of Hydrogen Peroxide using Multiple Jets in Crossflow – Mok, Jong
  • Investigation of Transfer Trajectories to and from the Equilateral Libration Points L4 and L5 in the Earth-Moon System – Irrgang, Lucia
  • Investigation of the Photo Stimulated Luminescence Spectroscopy Technique for Measuring 3-D Stresses – Mamun, Md-Wahid
  • Investigations of Microscale Fluid-Thermal Phenomena Based on the Deterministic Boltzmann-ESBGK Model – Guo, Xiaohui
  • Irreversible Thermodynamics and Continuum Mechanics in the Presence of Electromagnetic Fields – McNitt, Richard
  • Jet Noise Models for Forced Mixer Noise Predictions – Garrison, Loren
  • L2 and L Multiobjective Control for Linear Systems – Zhu, Guoming
  • LDV Measurements in an Angular Combustion Model – Barron, Dean
  • Laminar Boundary-Layer Instabilities on Hypersonic Cones: Computations for Benchmark Experiments – Robarge, Tyler
  • Laminar Instability and Transition on the X-51A – Borg, Matthew
  • Langmuir Probe Diagnostics on the Leap Electrothermal Thruster – Huu, Patrick
  • Langrangian Coherent Structures in the Circular Restricted Three-Body Problem – Short, Cody
  • Large Eddy Interactions in Curved Wall Boundary Layers - Model and Implications – Hong, Seung
  • Large Eddy Simulations of 2-D and 3-D Spatially Developing Mixing Layers – Martha, Chandra
  • Large Strain Compression Testing of Ductile Materials at Quasi-Static and Dynamic Strain Rates – Skube, Seth
  • Laser Differential Interferometry for Supersonic Blunt Body Receptivity Experiments – Salyer, Terry
  • Laser Doppler Velocimeter Measurements and Laser Sheet Imaging in an Annular Combustor Model – Dwenger, Richard
  • Lateral-Directional Eigenvector Flying Qualities Guidelines and Gain Weighted Eigenspace Assignment Methodology – Davidson, Jr., John
  • Linear Dynamic Analysis of Revolutional Shells Using Finite Elements and Modal Expansion – Chang, Yuan-Bin
  • Linear and Nonlinear Discrete-Time State-Space Modeling of Dynamic Systems for Control Applications – Rodrigues, Eduardo
  • Linear and Nonlinear Dynamcs of Swirl Injectors – Richardson, Renith
  • Liquid Film Cooling in a Model Combustor using Swirl Injection – Yu, Yen
  • Liquid and Gelled Sprays for Mixing Hypergolic Propellants Using an Impinging Jet Injection System – James, Mark
  • Longitudinal Equilibrium Solutions for a Towed Aircraft – Norris, Stephen
  • Longitudinal Flying Qualities and Controller Design for Nonlinear Aircraft – Ryu, Shiyang
  • Low Cycle Plasticity of IM7/8320 Thermoplastic Composite – O'Donnell, Sean
  • Low Velocity Impact of Composite Sandwich Plate – Wu, Chung-Lin
  • Low and High Speed STOVL Configurations in Ground Effect – Vukits, Thomas
  • Low-Thrust Trajectory Design and Optimization of Lunar South Pole Coverage Missions – Ozimek, Martin
  • Luminescent Paint Measurement Systems for Aerodynamics Applications – Guille, Marianne
  • Maneuver Costs for Transfers between Halo and Halo-like Orbits in the Circular Restricted Three-Body Problem – Byron, Jennifer
  • Mean Flow Measurements and Cone Flow Visualization at Mach 6 – Swanson, Erick
  • Measurement and Analysis in a Subscale Rocket Combustor – Helderman, David
  • Measurement and Analysis of an Unstable Model Rocket Combustor – Sisco, James
  • Measurement of Lift Development of Rapidly Accelerated Wings – Sawyer, Richard
  • Measurement of the Arc Chamber Pressure Distribution in a Magnetoplasmadynamic Thruster – Cassady, Robert
  • Measurements of Laminar-Turbulent Transition on Supersonic Wind-Tunnel Walls – Haven, Christine
  • Measurements of Second-Mode Instability Waves in Hypersonic Boundary Layers with a High-Frequency Pressure Trransducer – Berridge, Dennis
  • Mechanical Behavior of Nanomaterials: Modeling and Simulation – Zhang, Haitao
  • Mechanical Behavior of Silica Nanoparticle-Impregnated Kevlar Fabrics – Dong, Zhaoxu
  • Mechanical Characterization of an Electrodeposited Nanocrystalline Copper – Mseis, George
  • Mechanical Design and Control of Flexible Joint Robotic Manipulators – Zink, Jonathan
  • Mechanical Properties of Single-Walled Carbon Nanotubes by Modeling as Pin-Jointed Trusses – Bodily, Brandon
  • Mechanics of Formation of Wrinkles During the Processing of Thermoplastic Composites – Pandey, Ravindra
  • Mechanics of Fretting Fatigue Crack Formation – Szolwinski, Matthew
  • Mechanics of Roller Straightening – Varney, Bruce
  • Methods for Resolving Visual Ambiguities During Optical Target Tracking – Dean, Loren
  • Methods of Analysis for Thick-Section Composite Structures – Luo, Jiayi
  • Micro-Sphere Adhesive System for Quick Repair – Samson, Daniel
  • Microcomputer-Based Flight Simulation – Williamson, Robert
  • Micromechanical and Fracture Characteristics of Metal-Ceramic Composites – Agrawal, Parul
  • Mission Design Applications in the Earth-Moon System: Transfer Trajectories and Stationkeeping – Pavlak, Thomas
  • Model Cost Analysis of Flexible Structures: Modeling Flexible Structures For Control Design – Hu, Anren
  • Model Reduction, Sensor/Actuator Selection and Control System Redesign for Large Flexible Structures – Kim, Jae
  • Model and Controller Reduction of Uncertain Systems Using Covariance Equivalent Realizations – Wagie, David
  • Model and Controller Reduction: A New Approach Using Oblique Projections and Canonical Interactions – DeVillemagne, Christain
  • Model-Based Analysis and Cooperative Synthesis of Control and Display Augmentation Per Piloted Flight Vehicles – Garg, Sanjay
  • Model-Based Compression of GPS Ephemeris – Eichel, Brenda
  • Model-Based System-of-Systems Engineering for Space-Based Command, Control, Communication, and Information Architecture Design – Sindiy, Oleg
  • Modeled High Lift Wake Flows at High Reynolds Number – Bucci, Gregory
  • Modeling Acoustically Induced Oscillations of Droplets – Murray, Ian
  • Modeling Crack Propagation in Modern Stiffened Fuselage Structures – Kloeden, Richard
  • Modeling Delamination in Composite Laminates – Zheng, Shunfeng
  • Modeling Dense Sprays Produced by Pressure-Swirl Atomizer – Park, Ki
  • Modeling Human Perception and Estimation of Kinematic Responses During Aircraft Landing – Silk, Anthony
  • Modeling Micro-Inertia in Composite Materials Subjected to Dynamic Loading – Wang, Zeping
  • Modeling Physical Aging in Polymeric Composites – Hu, Huiwen
  • Modeling and Fracture Prediction in Rubber Composites – Pidaparti, Ramana
  • Modeling and Lowering Thermal Residual Stresses in Bonded Composite Repairs of Metallic Aircraft Structure – Cho, Jeongmin
  • Modeling of Classical Swirl Injector Dynamics – Ismailov, Maksud
  • Modeling of Drop Trajectories and Drop/Wall Interactions in Gas Turbine Engine Sumps – Weinstock, Vladimir
  • Modeling of Fretting Fatigue and Life Prediction in Blade/Disk Contacts – Haradanahalli, Murthy
  • Modeling of Geometry Effects in Fretting Fatigue – Bartha, Bence
  • Modeling of Oil Film Behavior on a Seal Runner and a Sump Wall – Shimo, Masayoshi
  • Modeling of Plate/Fastener Contact: Application to Fretting Fatigue – Ganapathy, Harish
  • Modeling the Effect of Unsteady Chamber Conditions on Atomization Processes – Rump, Kurt
  • Modeling, Design, and Control of Tensegrity Structures with Applications – Sultan, Cornel
  • Molecular Sensors for MEMS – Huang, Chih-Yung
  • Molecular Simulations of Deformation, Failure and Fracture of Nanostructured Materials – Adnan, Ashfaq
  • Molecular-Mixing Measurements and Turbulent-Structure Visualizations in a Round Jet with Tabs – Zhang, Shucheng
  • Motivation, Design, and Calibration of a High Frequency Fretting Fatigue Load Frame – Matlik, John
  • Multi-Body Mission Design in the Saturnian System with Emphasis on Enceladus Accessibility – Brown, Todd
  • Multidimensional Time Dependent Method of Characteristics – Parpia, Ijaz
  • Multilevel Control-Structure Design Using LQG Design Sensitivity Analysis Techniques – Gilbert, Michael
  • Multiobjective Control/Structure Design Optimization in the Presence of Practical Constraints – Layton, Jeffrey
  • Multiobjective Optimization Using Genetic Algorithms With Applications For Aircraft Design – Martin, Eric
  • Multiobjective Optimization of an Axisymmetric Supersonic-Inlet Bypass-Duct Splitter via Surrogate Modeling – Haderlie, Jacob
  • Multiple Lunar Encounter Trajectory Design Using a Multi-Conic Approach – Spencer, David Allen
  • Multiple Objective Control System Synthesis Via Lifting Techniques – Smith, Monty
  • Natural Conformation: A Study of the Shape of Structures in Equilibrium – Djibo, Louise-Olivia
  • Necessary and Sufficient Conditions for Sample Stability of Second Order Stochastic Differential Equations – Mitchell, Richard
  • Nitramine Composite Propellant Modeling – Blomshield, Frederick
  • Non-Linear Oscillations of a Liquid Excited by Periodic Vertical Forces Under Weak of Zero Gravity Conditions – Luo, Fang-Fu
  • Nondestructive and Strain Testing of Composite Sandwich Panels – Goyings, Ryan
  • Nonisentropic Unsteady Three Dimensional Transonic Small Disturbance Potential Theory – Gibbons, Michael
  • Nonisentropic Unsteady Transonic Small Disturbance Theory – Fuglsang, Dennis
  • Nonlinear Analysis of Composite Laminates – Chen, Jinn-Kuen
  • Nonlinear Behavior of Ferroelectric Materials – Achuthan, Ajit
  • Nonlinear Control of Mechanical and Aerospace Systems with Flexible Elements: Application to Robotics – Zenieh, Salah
  • Nonlinear Dynamic Response of Shallow Arches to Harmonic Forcing – Blair, Kim
  • Nonlinear Dynamics and Chaotic Motions of a Singularly Perturbed Nonlinear Viscoelastic Beam – Georgiou, Iannis
  • Nonlinear Finite Element Analysis of Plates and Shells of Composite Laminates – Chen, Gang
  • Nonlinear Modeling of Atomization Processes – Hilbing, James
  • Nonlinear Modeling of Jet Atomization in the Wind-Induced Regime – Spangler, Christopher
  • Nonlinear Rate Dependent Response of Thick-Section Composite Laminates – Weeks, Craig
  • Nonparallel Analysis and Measurements of Instability Waves in a High-Speed Liquid Jet – Portillo, Juan
  • Nozzle Modifications for High-Reynolds-Number Quiet Flow in the Boeing/AFOSR Mach-6 Quiet Tunnel – Juliano, Thomas
  • Numerical Analysis of Coaxial Swirl Injectors – Canino, James
  • Numerical Approaches for Hydrodynamic Cavitating Flows – Chen, Yongliang
  • Numerical Determination of Stress Intensity Factors for Cracks at Deep Notches – Heinimann, Markus
  • Numerical Investigations on Fracture Behavior of Ductile Materials – Weng, Tung-Li
  • Numerical Methods for Modeling Gas Turbine Combustors – Koenigs, Michael
  • Numerical Simulation of GPS Code Tracking Loops – Liang, Liang
  • Numerical Simulations of Knudsen Forces in Microsystems – Nabeth, Jeremy
  • Numerical Simulations of Supersonic Jet Flows – Lo, Shih-Chieh
  • Numerical Simulations of a Turbulent Axial Vortex – Qin, Jim
  • Numerical Studies of Problems in Anistropic Plasticity – Leewood, Alan
  • Obtaining Ocean Roughness Statistics from Reflected GPS Signals – Smajlovic, Dino
  • On Determination of Apparent Fracture Toughness and Frature Process Zone – Chitsiriphanit, Suvanit
  • On Dynamic Subgrid-Scale Modeling for Large-Eddy Simulation of Compressible Turbulent Flows – Spyropoulos, Evangelos
  • On Prediction of Elastic Moduli and Plastic Flow In Composite Materials Using Micromechanics – Vaidya, Rajesh
  • On the Development of a Jet Noise Prediction Methodology – Koutsavdis, Evangelos
  • On the Dynamics of a Disordered Linear Chain – Soong, Tsu-teh
  • On the Effect of Matrix Cracks on Laminate Strength – Jen, Kwang-Chi
  • On the Effect of Matrix Cracks on Laminate Strength – Iwasaki, Tetsuya
  • On the Nonlinear Dynamic Response of Plain Orifice Atomizers/Injectors – MacDonald, Megan
  • On the Propagation of Waves in an Electromagnetic Elastic Solid – Dunkin, John
  • On the Static Nonlinear Theory of Electromagnetic Thermoelastic Solids – Jordan, Neal
  • Open-loop Tracking of an Occulting GNSS Signal – Ventre, Brian
  • Optimal Covariance Control For Linear Continuous and Discrete Time Systems – Damra, Fayez
  • Optimal Design of Partial-Plate Piezoelectric Actuators for Maximum Panel Deflection – Leeks, Tamara
  • Optimal Sensor/Actuator Selection, Number, and Placement for Linear Stochastic Systems – Chiu, Di
  • Optimal Transfers Between Libration-Point Orbits in the Elliptic Restricted Three-Body Problem – Hiday, Lisa
  • Optimally Designed Propellers Constrained by Noise – Miller, Christopher
  • Optimization Approaches for Morphing Airfoils Using Drag and Strain Energy as Objectives – Nankani, Kamlesh
  • Orbit Determination Error Analysis and Station-Keeping for Libration Point Trajectories – Gordon, Steven
  • Orbit Determination of a Spacecraft with Undetermined Control Inputs – Ely, Todd
  • Order Reduction for Closed-Loop Systems – Bacon, Barton
  • Oscillations in a Forward-Facing Cavity Measured Using Laser-Differential Interferometry in a Hypersonic Quiet Tunnel – Segura, Rodrigo
  • Panel Method for Counter Rotating Propellers – Chen, Shih_Hsiung
  • Parallel Computational Methods on Structural Mechanics Analysis – Chien, Lung-Siaen
  • Parallel Computing Techniques for Rotorcraft Aerodynamics – Ekici, Kivanc
  • Parameter Estimation of the G-12 Parachute – Kothandaraman, Govindarajan
  • Parametric Studies of an Aluminum-Hydrogen Peroxide Semi-Fuel Cell – Brodrecht, David
  • Parametric Study of Damager Containment Features in Integral Structures for Optimum Crack Retardation – Grinham, Matthew
  • Parametric Study of the Generation of Shocks in Near-Critical Turbofan Nozzles – Kube-McDowell, Matthew
  • Particle Image Velocimetry Applied to Flow in the Wake of a Flat Plate – Young, Steven
  • Particulate Enhanced Damping of Sandwich Structures – Maley, Scott
  • Passive and Active Control of Civil Structures Under Dynamic Wind Loads – Ankireddi, Seshasayee
  • Performance Analysis of Coupled and Segregated CFD Methods – Sardeshmukh, Swanand
  • Performance Characterization of a Radio-Frequency Capacitively Coupled Discharge Microthruster – Stein, William
  • Performance of Hard Turned Surfaces – Bartha, Bence
  • Performance of Sandwich Structures with Composite Reinforced Core – Hasebe, Ryoichi
  • Performance of Wind Turbines in a Turbulent Atmosphere – Sundar, R.M.
  • Performance of a New Air-Assist/Air-Blast Atomizer for Large Liquid Mass Flows – Hoverman, Thomas
  • Piezoelectric Ceramics For High Temperature Aerospace Applications – Gnanamanickam, Ebenezer
  • Pin-Contact Failure in Composite Laminates – Wu, Peir-Shin
  • Pinch-off of Borosilicate Glass and Aluminum Oxide Rods Using Micro-Indentation Cracking – Chen, Yen-Meng
  • Plume and Performance Measurements on a Plug Nozzle for Supersonic Business Jet Applications – Sandroni, Alexander
  • Porous Pressure Sensitive Paints for Aerodynamic Applications – Sakaue, Hirotaka
  • Power Flow Analysis of Wave Propagation in Trusses – Martin, Michael
  • Ppoincare Sections and Resonant Orbits in the Restricted Three-Body Problem – Vaquero, Mar
  • Prediction of Adhesive Stress and Strain Solution and Failure Criterion of Single Lap Bonded Joints – Lee, Jungmin
  • Prediction of End-Cap Effects on Equilibrium Helium Bubbles in the Gravity Probe-B Spacecraft – Bayt, Robert
  • Prediction of Fatigue Crack Lives and Shapes – Tritsch, Douglas
  • Predictive Forming of Advanced Thermoplastic Composite Structures – Wang, Cong
  • Prediffuser-Combustor Model Studies Under Conditions of Water Ingestion in Engines – Minster, Todd
  • Pressure Oscillation Analysis of a Research Dump Combustor Ramjet Experiencing Combustion Instability – Blomshield, Frederick
  • Pressure Sensitive Paints for Aerodynamic Applications – Torgerson, Shad
  • Primer Vector Theory in the Design of Optimal Transfers Involving Libration Point Orbits – Bell, Julia
  • Propellant Solid Phase Temperature Measurements – McGrath, David
  • Propellantless Spacecraft Maneuvers Using the Electromagnetic Lorentz Force – Pollock, George
  • Propfan Supersonic Panel Method Analysis and Flutter Predictions – Hwang, Ching-Chywan
  • Q-Markov Cover Identification and Integrated MCA-OVC Controller Design for Flexible Structures – Liu, Ketau
  • Quadratic Boundedness of Uncertain Nonlinear Dynamic Systems – Brockman, Mark
  • Quadratic Stabilization of Uncertain Systems: Reduced Gain Controllers, Order Reduction, and Quadratic Controllability – Swei, Shan-Min
  • Qualification Testing and Fluorescent Imaging of Biobased Aviation Deicer Fluids – Smith, Justin
  • Quantitative Noise Reduction Measurements of a Multiple-Source Schlieren System – Salyer, Terry
  • Radial Inertia Effects on Dynamic Response of Extra-Soft Materials in Split Hopkinson Pressure Bar Experiments – Ge, Yun
  • Random Vibration of Uncertain Beam Structures with Geometrical Nonlinearity – Chang, Chihchen
  • Real-time Thermal Observer for Electric Machines – Saheba, Ruchir
  • Receptivity Experiments on a Hemispherical Nose at Mach 4 – Randall, Laura
  • Receptivity of the Boundary Layer on a Mach-4 Elliptic Cone to Laser-Generated Localized Freestream Perturbations – Schmisseur, John
  • Recursive Partitioning Estimation – Gau, Ching-Fu
  • Reducing Free Edge Effect on Laminate Strength by Edge Modification – Chu, Gou-Don
  • Reflection and Transmission of Flexural Waves at Discontinuities – Kamle, Sudhir
  • Relativistic Effects of Nonuniform Motion on the Propagation of an Electromagnetic Wave – Neulieb, Robert
  • Reliability Study of Uncertain Structures Using Stochastic Finite Elements – Liaw, Der-Guang
  • Repair and Reinforcement of Cracked Aluminum Plates with Adhesively Bonded Composite Patches – Lena, Michael
  • Representations of Invariant Manifolds for Applications in System-to-System Transfer Design – Patterson, Christopher
  • Resistance of Adhesively Bonded Composite Lap Joints to Damage by Transverse Ice Impact – Park, Hwun
  • Response Surface Methods for Optimization – Smith, III, Crawford
  • Rigorous Investigation of Cavitation in a 2-D Slot Orifice – Sanchez, Paul
  • Robust Control and Control System Integration Using Finite-Signal-to-Noise Model – Lu, Jianbo
  • Robust Control of Uncertain Aerospace and Mechanical Systems with Unmodelled Flexibilities: A Singular Perturbation Approach – Da, Dong
  • Robust Estimators for Target Tracking – Kim, Eung
  • Roughness-Induced Instability in a Laminar Boundary Layer at Mach 6 – Wheaton, Bradely
  • Satellite Constellation Design Methods – Williams, Edwin
  • Scalability of Mechanical and Thermal Loads in Underexpanded Jet Impact – Love, James
  • Search Problems in Mission Planning and Navigations of Autonomous Aircraft – Krozel, James
  • Secondary Flow and Three-Dimensional Separation in Curved Circular Duct – Davis, Roger
  • Selection of Noisy Sensors and Actuators for Regulation of Linear Systems – Delorenzo, Michael
  • Selection of Non-Ideal Noisy Actuators and Sensors in the Control of Linear Systems – Norris, Gregory
  • Sensitivity Reducing Controller Design Method for Uncertain Parameter Systems – Okada, Kenji
  • Simple Uncertainty Propagation for Early Design Phase Aircraft Sizing – Lenz, Annelise
  • Simulating Collisions of Droplets with Walls and Films Using a Level Set Method – Kwon, T.J.
  • Simulating Flapping Insect Wings Using An Aerodynamic Panel Method: Towards The Development of Flapping-Wing Technology – Smith, Michael
  • Simulation and Experiments of Low Pressure Water Vapor Flows Applied to Freeze-Drying – Ganguly, Arnab
  • Simulation of High-Lift Wake Behavior – Hoffenberg, Robert
  • Simulation of Mechanical Behavior of Nanomaterials by Molecular Statics – Chang, I-Ling
  • Simulation of Orifice Internal Flows Including Cavitation and Turbulence – Xu, Changhai
  • Simulation of Quenching and Induction Heat Treatment Processes With Experimental Verification – Wang, Kuo-Feng
  • Simulation of Quenching and Tempering of Steels – Jin, Long
  • Simulation of Shear Band Phenomenon in Metal Forming and Cutting – Heinstein, Martin
  • Simulation of Surface Grinding – Moulik, Pradipta
  • Simulation of Vortex Bursting – Tan, Jiak-Kwang
  • Simulation of the Nonlinear Dynamics of Charged Liquids Using Boundary Element Methods – Yoon, Suk
  • Sinusoid Estimation in Additive Noise and Applications in Experimental Vibration Analysis – Yagci, Baris
  • Small Crack Initiation and Formation - An Investigation into Equivalent Initial Flaw Size and Parallel Offset Surface Crack Interactions – Needham, Galen
  • Solid Propellant Flame Temperature Measurements – Geyer, Mark
  • Solid Rocket Motor Grain Burnback Analysis Using Adaptive Grid Techniques – Hejl, Robert
  • Some Aspects of Gramian Assignment and Interpolation in Control Systems – Kherat, Samir
  • Some Aspects of the Theory of Propagation of Periodic and Transcient Sounds in Absorbent Ducts and in Rooms With an Open Window – Vaidya, P.G.
  • Some Considerations of Actuator Dynamics in the Control of a Flexible Beam – Baxter, Michael
  • Spacecraft Formation Keeping Near the Libration Points of the Sun-Earth/Moon System – Marchand, Belinda
  • Spacecraft Trajectory Design in the Context of a Coherent Restricted Four-Body Problem – Guzmán, José
  • Spatial and Temporal Adaptive Procedures for the Unsteady Aerodynamic Analysis of Airfoils Using Unstructured Meshes – Hooker, John
  • Spectral Analysis of Wave Propagation in Connected Waveguides – Srinivasan, Gopalakrishnan
  • Stabilization, Observation, Tracking and Disturbance Rejection for Uncertain/Nonlinear and Time-Varying Systems – Acikmese, Ahmet
  • State Covariance Assignment of Discrete Systems: Development & Applications – Collins, Emmanuel
  • Static Aeroelasticity of a Composite Oblique Wing – Bohlmann, Jonathan
  • Static Two-Phase Solutions in a Laterally-Compressed Circular Cylinder in Zero Gravity – Jaron, Jacqueline
  • Static and Dynamic Contact Behaviors of Composite Laminates – Yang, Shih-Hsian
  • Station-Keeping Strategies for Libration Point Orbits: Target Point and Floquet Mode Approaches – Keeter, Timothy
  • Stochastic Linear Hybrid Systems: Modeling, Estimation, and Application – Seah, Chze Eng
  • Stochastic Model for Ocean Surface Reflected GPS Signals and Satellite Remote Sensing Applications – You, Huai-Tzu
  • Strategies for Solar Sail Mission Design in the Circular Restricted Three-Body Problem – McInnes, Allan
  • Strategies for the Sustained Human Exploration of Mars – Landau, Damon
  • Streamwise Vortex Instability and Hypersonic Boundary-Layer Transition on the Hyper-2000 – Matsumura, Shin
  • Strength Prediction of Bonded Joints Using the Critical CTOA Criterion – Dustin, Joshua
  • Stress Intensity Factors for Fatigue Cracks at Holes Under Cyclic Stress Gradients – Perez, Rigoberto
  • Stress-Intensity Factors Solutions for Countersunk Holes Under Pin-Loading – Chiew, Lee
  • Structural Optimization Using Passive and Active Control – Smith, Monty
  • Structural Parameter Identification of Member Characteristics in a Finite Element Model – Sprandel, James
  • Studies on Pressure-Gain Combustion Engines – Matsutomi, Yu
  • Study of 1-D Multifunctional Acoustic Metamaterials – Mikoshiba, Kota
  • Study of Fatigue Behavior of Embedded Copper in Multifunctional Composite Materials – Hsieh, Kelli
  • Study of Heat Transfer in a Gaseous Hydrogen Liquid Oxygen Multi-Element Combustor – Droppers, Lloyd
  • Study of Hydrodynamic Instability of Shear Coaxial Flow in a Recessed Region – Kim, Byoung-Do
  • Study of Hydrogen Peroxide Low-Gravity Control for Propellant Management Devices – Fitzpatrick, Shannon
  • Study of Surrogates for Conventional and Synthetic Aviation Jet Fuels – Singh, Deepti
  • Study of an Under-expanded Sonic Impinging Jet Array – Lee, Joon
  • Sun-Synchronous Trajectory Design Using Consecutive Lunar Gravity Assists – Marsh, Steven
  • Supercritical Fuel Film Cooling in a RP-1/Gox Staged Combustion Rocket – Haberlen, Philip
  • Supersonic Analysis of Plume Characteristics for Asymmetric Nozzles – Childress, Karla
  • Surface Thermal Loading Imposed By A Sonic Or Supersonic Impinging Jet – Stuerman, Michael
  • Swirl Injectors for Oxidizer-Rich Stages Combustion Cycle Engines and Hypergolic Propellants – Long, Matthew
  • System Design in an Evolving System-of-Systems Architecture and Concept of Operations – Rovekamp, Jr., Roger
  • Tactical Strategies for Improving Accuracy in Optical Targeting Systems – Hoshizaki, Takayuki
  • Target Tracking of Maneuvering Aircrafts and Tracker Parameter Optimization – Mavromatis, Theofanis
  • Technique for Experimental Grinding Ratio Measurement – Dunlap, Tony
  • Techniques for Rapid Characterization of Grinding Wheel-Workpiece Combinations – Kompella, Sridhar
  • Temperature Sensitive Flourescent Paints for Aerodynamics Applications – Campbell, Bryan
  • Temporal-Adaptive Euler/Navier-Stokes Algorithm For Unsteady Aerodynamic Analysis of Airfoils Using Triangular Meshes – Kleb, William
  • Temporary Satellite Capture of Short-Period Jupiter Family Comets from the Perspective of Dynamical Systems – Marchand, Belinda
  • The Application of Subarcsecond Star Tracker Technology to Interplanetary Navigation – Murdock, Kelley
  • The Characterization and Modeling of Advanced Thermoplastic Composite Materials Forming Processes – Morris, Scott
  • The Characterization of Damage Due to Out-of-Plane Loading in the AS4/PEEK Composite – Morris, Scott
  • The Controlled-Damage Concept in Design of Laminated Composites – Norman, Timothy
  • The Design Build and Testing of an Infrared Aim Point Biasing Structure – Spohn, Jason
  • The Design and Operation of a Servo-Controlled Solid Propellant Strand Window Bomb – Lilley, Jay
  • The Design and Testing of a High Reynolds Number Vortex Tube – Detert, Bruce
  • The Design of System-to-System Transfer Arcs using Invariant Manifolds in the Multi-Body Problem – Alonso, Germán
  • The Detection and Localization of Traffic Congestion for Highway Traffic Systems Using Hybrid Estimation Techniques – Aligawesa, Alinda
  • The Development of Gortler Vortices in a Curved Duct – Shin, Bohyun
  • The Development of Photo-Stimulated Luminescence Spectroscopy for 3-D Stress Measurements – Raghavan, Seetha
  • The Dynamic Behavior of an Automobile Tire – Hunckler, Charles
  • The Effect of Erosive Burning of Temperature Sensitivity in Composite Solid Propellants – Barger, Mary
  • The Effect on Fatigue Crack Growth Under Spectrum Loading of An Imposed Placard "G" Limit – Walker, Kevin
  • The Effects of Joule Heat on Turbulent Dispersion of Temperature in High Reynolds Number Flow – Kendall, Donald
  • The Effects of Low-Observable Requirements on Tanker/Transport Aircraft – Bowman, Jason
  • The Electrical Properties of Grain Boundaries in Nickel Oxide and Magnesium Oxide – Osburn, Carlton
  • The Evaluation of Stress Intensity Factors by Finite Element Method – Jih, Chan-Jiun
  • The Evaluation of Three Control Laws for the CH-47 Helicopter – Townsend, Barbara
  • The Fatigue Crack Growth Behavior of an Experimental Tenary AL-2.6LI-0.09ZR Alloy – Henkener, Julie
  • The Flowfield Around a Stovl Aircraft Model in Ground Effect – MacLean, Roderick
  • The Generic Aircraft Tracker: Theory and Computer Implementation – Tao, Xuefent
  • The Gravitational Influence of a Fourth Body on Periodic Halo Orbits – Spencer, David Bradley
  • The Impact of Solar Radiation Pressure on Sun-Earth Ll Libration Point Orbits – Bell, Julia
  • The Impingement of Sonic and Sub-Sonic Jets Onto a Flat Plate at Inclined Angles – Crafton, Jimmy
  • The Influence of Initial Inhomogeneities on Notch Fatigue of 7050-T7451 Aluminum Plate – Zezula, Chad
  • The Mechanical Fuse – Slijepcevic, Stevan
  • The Mechanics and Tribology of Fretting Fatigue with Application to Riveted Lap Joints – Szolwinski, Matthew
  • The Non-Catalytic Ignition of High-Performance Monopropellants – Remson, Andrew
  • The Numerical Determination of Lissajous Orbits in the Circular Restricted Three-Body Problem – Pernicka, Henry
  • The Numerical Determination of Nominal Libration Point Trajectories and Development of Station-Keeping Strategy – Pernicka, Henry
  • The Photoelastic Analysis of Mixed-Mode Fracture Mechanics – Takezaki, Juro
  • The Stability of Time-Dependent, Conducting Boussinesq Fluids by the Method of Energy – Zoeller, Michael
  • The Static and Fatigue Characteristics of a Notched Hybrid Composite Laminate – Aratama, Shigeki
  • The Theoretical Performance of High Efficiency Propellers – Chang, Li
  • The Upper Limit of Constant Strain Rate in a SHPB Experiment for a Linearly Elastic Material – Pan, Yi
  • The Use of Solar Sails in the Circular Restricted Problem of Three Bodies – Nuss, Jason
  • The Use of an Inertial Measurement Unit in the Flight Testing of a Small, Remote-Piloted Air Vehicle – Londner, Edward
  • Theory and Applications of Ballute Aerocapture and DUal-Use Ballute Systems for Exploration of the Solar System – Gates, Kristin
  • Thermal Aspects of Grinding for Surface Integrity – Ju, Yongging
  • Thermal Decomposition of an Advanced Monopropellant – Rubel, Ken
  • Thermal Modeling of Grinding for Process Optimization and Durability Improvements – Hanna, Ihab
  • Three Dimensional Boundary Element Analysis of Contact and Fracture Problems – Liu, Minzhu
  • Three Dimensional Crack Closure Measurements in Polycarbonate – Ray, Suvendoo
  • Three Dimensional Full Potential Method for the Aeroelastic Modeling of Propfans – Ku, Chieh-Chang
  • Three-Dimensional Characteristics of the Plastic Zone and Necking in the Crack Tip Region – Deitemeyer, Adam
  • Three-Dimensional Effects in Elastic-Plastic Fracture – Su, Xuming
  • Three-Dimensional Fatigue Crack Closure of Metals – Dawicke, David
  • Three-Dimensional Finite Element Analysis of Free Edge Delamination in Composite Laminate – He, Chien-Cheng
  • Three-Dimensional Finite Element Formulations for Thick and Thin Laminated Plates – Wanthal, Steven
  • Three-Dimensional Piezoelectric Boundary Elements – Hill, Lisa
  • Time Series Analysis of Closed-Loop Pilot Vehicles Dynamics – Biezad, Daniel
  • Time-marching Aeroelastic and Spatial Adaptation Procedures on Triangular and Tetrahedral Meshes Using an Unstructured-grid Euler Method – Rausch, Russ
  • Tracking Fixed Wing Aircraft and Helicopters Using Attitude and Rotor Angle Information – Schierman, John
  • Trajectory Control Through Thrust Vector Rotation – Bulathsinghala, Ivor
  • Trajectory Control for Agile Landmines – Kowalkowski, Matthew
  • Trajectory Design in the Earth-Moon System and Lunar South Pole Coverage – Grebow, Daniel
  • Trajectory Design in the Sun-Earth-Moon Four Body Problem – Wilson, Roby
  • Transfer Trajectories from Earth Parking Orbits to L1 Halo Orbits – Mains, Deanna
  • Transfers between the Earth-Moon and Sun-Earth Systems using Manifolds and Transit Orbits – Kakoi, Masaki
  • Transfers to Earth-Moon L2 Halo Orbits Using Lunar Proximity and Invariant Manifolds – Gordon, Dawn
  • Transonic Aeroelastic Stability and Response of Conventional and Supercritical Airfoils Including Active Controls – Batina, John
  • Transonic Drag Reduction through the use of Induced Strain Actuators to Form an Adaptive Airfoil – Muller, Mark
  • Transverse Impact of Stiffened Laminated Composite Panels – Norman, Timothy
  • Tube Network and Dynamic Sectorization of Airspace for Next Generation Air Transportation System (NextGen) – Kotecha, Pankit
  • Turbulence Model Computations of an Axial Vortex – Bodony, Daniel
  • Underactuated Control of Two-Link Manipulator – Kim, Jinsuck
  • Unmanned Aerial Platform for Atmospheric Flux Measurements – Garibaldi, Oscar
  • Unsteady Aerodynamics of Advanced Ducted Fans – Huang, Wen_liang
  • Unsteady Aeroelastic Optimization in the Transonic Regime – Kolonay, Raymond
  • Unsteady Pressure Measurements in a Turbocharger Compressor using Porous Pressure-Sensitive Paint – Gregory, James
  • Unsteady Propeller/Wing Aerodynamic Interactions – Johnston, Robert
  • Unsteady, Viscous, Cavitating Simulation of Injector Internal Flows – Bunnell, Robert
  • Use of Cracked Beam Finite Elements to Estimate Stress Intensity Factors – Grady, Joseph
  • Use of a PID Control Structure to Design an Autopilot for an Autonomous Aircraft – Chen, Jit-Tat
  • Using Stable Manifolds to Generate Transfers in the Circular Restricted Problem of Three Bodies – Barden, Brian
  • Using the Genetic Algorithm for Multidisciplinary Helicopter Rotor Airfoil Design: Shape and Topology Approaches – Fanjoy, David
  • Validation of Numerical Simulations for Nano-Aluminum Composite Solid Propellants – Yan, Allen
  • Vaporization and Decomposition of Hydrogen Peroxide Droplets – Pearson, Nicholas
  • Vibration Control of Flexible Structures – Fur, Lih-Shing
  • Viscous Effects on Transonic Airfoil Stability and Response – Berry, Howard
  • Visualization of Liquid Jet Breakup and Droplet Formation – Moses, Michael
  • Vortex Dynamics in A Viscous Incompressible Fluid – Dixon, Vernon
  • Wave Packets Generated by a Surface Glow Discharge on a Cone at Mach 4 – Ladoon, Dale
  • Wave Propagation in Graphite/Epoxy Laminate Due to Impact – Tan, Tein-min
  • Wind Tunnel Testing of a Supersonic Cruise Nozzle in Subsonic Ejector Configuration – Jones, Jesse
  • Zero Gravity Two-Phase Stability Solutions of Droplets in a Bent Circular Cylinder – Braun, Jonathan